28088 | snhu 1206.. solution for face milling with 88º...
TRANSCRIPT
28088 | SNHU 1206..
Cutters
Inserts
• Excellent cutting performance& exceptionally economical.• Low power requirement & smooth cutting possible due to positive helical angle.• Excellent solution for roughing when it’s not necessary the 90º halls.
• High positive cutting rakegeometry for light and smooth cut.• Up to 10,5 mm depth of cut.• Dimple chip breaker to lower cutting forces and temperature.• Inserts with 1,2 mm flat wiperfor good quality surface finishing.
Specifications• Geometry: 88º milling operations.• Cutter diameters: - Arbor Mounting (A): Ø50 till Ø160.• Workpiece materials: Steel & cast iron.
Applications
Facing Shouldering
Solution for face milling with 88º lead angle
A28088 – 63 - 80A28088 – 100A28088 – 125A28088 – 160 - 200
P0401200P0401200P0401200P0401200
XT15PT15PT15PT15
-J0164110J0204610
-
-SD6368-16SD6368-20
-
Key(Torx)
Screw DIN 6368InsertScrew
CutterØDc
Item 1 2
TorqueValue3,03,03,03,0
Order Separately
28088Arbor Mounting
Screws & Keys
2
28088 Cutters
181084300181091600181091700181091800181091900181092000181092100181092200181092300181092700181092800181092900
5679811101412181422
50638080
100100125125160160200200
4248606073739090110110172172
222227273232404040406060
Dimensions (mm) Specifications
050A28088-05-06-022040063A28088-06-06-022040080A28088-07-06-027050080A28088-09-06-027050100A28088-08-06-032050100A28088-11-06-032050125A28088-10-06-040063125A28088-14-06-040063160A28088-12-06-U040063*160A28088-18-06-U040063*200A28088-14-06-U060063*200A28088-22-06-U060063*
ReferenceOrder CodeStyle ap
(mm)
Stock
404050505050636363636363
AAAABBBBCCCC
0,40,51,00,91,61,53,13,03,73,56,36,1
11,0
Ø Dc
50,963,980,980,9
100,9100,9125,9125,9160,9160,9200,9200,9
Ø Dc2 Ø d Ø Dg L
Stock itens / Itens de stock
* Cutters without internal coolant supply
Available under request / Disponibilidade sob consulta / Disponible bajo consulta
88º-6º
Dc
L
dg
ap
d
Dc2
21
21
SNHU 120608 ZNER-LP Inserts
28088
13,31112020
PH69
10
PH69
20
PH69
30
PH79
10
PH67
40
PH69
20
PH69
30
PH69
10
54 68 66 G1 I5 68 66
6,35 11,6 0,8 1,0
(2) Grade Code
(1)Geometry
Dimensions (mm)
IC S I R FReference
KP M
SNHU 120608 ZNER-LP
54 68 66 G1 I5
PH69
20
PH69
30
PH79
10
PH67
40
3
Chip Breaker
Chip Breaker Cutting Edge Features
Geometry LPLight machining of steels
Positive top rake angle to promote a good chip flow and reduce power consumption.
5°25°
0,2
FR
iC S
Grades Selection Guide
PH5920 PH6920 PH5740 PH6740ISOHB
(Brinell)
P
KMalleable Cast Iron
Grey Cast Iron
Nodular Cast Iron
125 - 220
220 - 280
280 - 380130 - 230
180 - 245
160 - 250
Unalloyed Steel
Low-Alloyed Steel
High-Alloyed Steel
Wear Resistance ToughnessGrades
Order code = (1) Geometry Code + (2) Grade CodeStock items / Itens de stockFirst choice / 1ª escolha / 1ª opción
Available under request / Disponibilidade sob consulta / Disponible bajo consulta
FLYERMKT_10_ED01_REV00_13
28088
4
Palbit S.A. | P. O. Box Nº4, Palhal | 3854-908 Branca, Alb.-a-Velha | PortugalTel.: (+351) 234 540 300 | Fax: (+351) 234 540 301/2
www.palbit.pt | [email protected]
Rec. Cutting Conditions
P
PH5705 PH6920 PH6740
P
K
ISOHB
(Brinell)Vc (m/min) Feed
fz (mm/t)
Malleable Cast Iron
Grey Cast Iron
Nodular Cast Iron
125 - 220
220 - 280
280 - 380130 - 230
180 - 245
160 - 250
---
170 (240) 290130 (170) 210120 (140) 170
140 (170) 190120 (140) 170100 (120) 150
160 (180) 295170 (270) 340120 (150) 200
140 (160) 250145 (180) 280105 (150) 170
---
---
0,10 (0,25) 0,35
PH5740---
Unalloyed Steel
Low-Alloyed Steel
High-Alloyed Steel
(1) The above chart indicates the cutting conditions of 70% of the tool engagement.(2) With low worpiece clamping rigidity or long overhang of the tool, adjust cutting speed and feed to 70 or 80% of the recommended conditions above.(3) Surface finishing is determined by speed/feed used.
4
PH5705 PH6920 PH6740
K
ISOHB
(Brinell)Vc (m/min) Feed
fz (mm/t)Malleable Cast Iron
Grey Cast Iron
Nodular Cast Iron
130 - 230
180 - 245
160 - 250
160 (180) 295170 (270) 340120 (150) 200
140 (160) 250145 (180) 280105 (150) 170
---
---
0,10 (0,25) 0,350,10 (0,25) 0,350,10 (0,25) 0,35
PH5740
This example shows the recommended starting cutting conditions, indicated in Bold type.
Selection Example:
Grades
Grades Information
PH5705
PH6920
PH5740
PH6740
MT-CVD coated carbide grade with a hard substrate and very smooth surface. Ideal for high speed cutting of cast irons.
Coated carbide grade for high cutting speed applications, excellent solution to massive production with stable conditions.
Substrate grade binary (Wc & Co) with medium grain size combined with the medium temperature coating. Suitable for heavy roughing to roughing operations of cast irons with interruped cut at medium to low cutting speeds.
PVD coated carbide grade with large thickness coated grade for heavy roughing applications. Can work in all type of materials and endures a lot of vibration.
New
New