2902-28 adjustable motor and sensor series service manual
TRANSCRIPT
![Page 1: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/1.jpg)
2902-28 Adjustable Motor and Sensor Series
Service Manual
![Page 2: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/2.jpg)
Maintenance and Safety How to Remove the CoverMotor Maintenance
Motor Brushes ReplacementMotor Replacement
How to Replace the Heating ElementHow to Replace the Circuit Board
![Page 3: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/3.jpg)
The following slides contain instructions The following slides contain instructions and images toand images to service the components of 2902-28 hand dryers.hand dryers.
Consult installation instructions before using the equipment.
Maintenance
![Page 4: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/4.jpg)
Service Manual for2902-28
How to Remove the Cover
![Page 5: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/5.jpg)
Cover Specification
Cast Iron – White Porcelain2902-280000 (replacement P/N: P15-411)
Steel – White Enamel2902-287300 (replacement P/N: P15-412)
Stainless Steel - Satin2902-287400 (replacement P/N: P15-413)
![Page 6: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/6.jpg)
Reminder!
Disconnect the power to the unit beforeremoving the cover
![Page 7: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/7.jpg)
Removing the Cover
Loosen screws with security wrench provided.
Replacement Part Number: P15-419
!Note: To loosen screws:
Turn wrench in Clockwise direction. Screws will tighten to base plate and loosen from inside of cover.
![Page 8: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/8.jpg)
Remove the cover taking care to avoid damaging the cover or internal parts.
Removing the Cover (Cont).
![Page 9: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/9.jpg)
Service Manual for2902-28
How to Replace the Motor Brushes
![Page 10: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/10.jpg)
Motor Brushes Specification
•The motor brushes have a theoretical life of 3000 hours and must be changed if they are shorter than 0.2 inches
Replacement Part Number: P15-417
Motor Brushes are installed on the side of the motor.
![Page 11: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/11.jpg)
Reminder!
Disconnect the power to the unit beforeremoving the cover
![Page 12: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/12.jpg)
Replacing The Motor Brushes:
Step 1: Press the clip which is covering the brushes.
Step 2: Remove the clip to the side until you can see the brushes inside.
Step 3: Remove the brushes.
To replace the brushes, take the replacement and follow the above steps in reverse.
![Page 13: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/13.jpg)
Service Manual for2902-28
How to Remove the Motor
![Page 14: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/14.jpg)
Motor Specification• Universal Brush Motor• Class A• 1/3 HP. (250 W) • RPM may be manually adjusted by means of
a potentiometer • 3800 – 8200 r.p.m.• Safety thermal cut-off which temporarily
disables the dryer.
Replacement Part Number: P15-414
![Page 15: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/15.jpg)
Reminder!
Disconnect power to the unit before removing the cover
![Page 16: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/16.jpg)
Removing the Motor:
Remove the bar code label located on the volute.
![Page 17: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/17.jpg)
Loosen the fan wheel by using the #2 Allen key provided.
Removing the Motor (cont).
![Page 18: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/18.jpg)
Release the lateral springs that hold the motor in place.
Carefully remove the motor from its location, be careful not to damage the fan wheel.
Removing the Motor (cont).
![Page 19: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/19.jpg)
Remove the fuse cable from the motor.
To replace the motor, take the replacement and follow the above steps in reverse.
Removing the Motor (cont).
![Page 20: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/20.jpg)
Service Manual for2902-28
How to Remove The Heating Element
![Page 21: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/21.jpg)
Heating Element Specification
• Material: Waved wire NiCr heating element• Automatic resetting circuit breaker protects
against overheating. (302° F disconnect)
Replacement Part Number: P15-415
![Page 22: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/22.jpg)
Reminder!
Disconnect power to the unit before removing the cover
![Page 23: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/23.jpg)
Remove the bar code label located on the volute.
How to Remove The Heating Element
![Page 24: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/24.jpg)
Loosen the fan wheel/Turbine by using the #2 Allen key provided.
Turbine Replacement Part Number: P15-418
How to Remove the Heating Element (Cont).
![Page 25: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/25.jpg)
Disconnect the ground cable.
Remove the motor from the volute.
How to Remove the Heating Element (Cont).
![Page 26: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/26.jpg)
Disconnect all the cables from the motor that connect to the terminal block, (including the brown wire).
How to Remove the Heating Element (Cont).
![Page 27: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/27.jpg)
Remove the clip from the circuit board.
Remove the circuit board by pressing on the flaps.
How to Remove the Heating Element (Cont).
![Page 28: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/28.jpg)
Cut the Bridle.
Open the volute by separating each side.
How to Remove the Heating Element (Cont).
![Page 29: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/29.jpg)
To replace the heating element, take the replacement and follow the above steps in reverse.
Carefully remove the heating element from inside the volute.
How to Remove the Heating Element (Cont).
![Page 30: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/30.jpg)
Service Manual for2902-28
How to Replace the Circuit Board
![Page 31: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/31.jpg)
Circuit Board Specification
• Infrared sensor• Vandal resistant operating system will cause this
unit to automatically shut off if sensor is completely blocked. (60 seconds)
• Fully adjustable detection range: 2 – 8 inches
Replacement Part Number: P15-416
![Page 32: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/32.jpg)
Reminder!
Disconnect power to the unit before removing the cover
![Page 33: 2902-28 Adjustable Motor and Sensor Series Service Manual](https://reader034.vdocument.in/reader034/viewer/2022051507/58a021fc1a28aba47a8b566d/html5/thumbnails/33.jpg)
How To Remove the Circuit Board
Remove all the cables from the circuit board and the motor.
To replace the circuit board, take the replacement and follow the above steps in reverse.