29300_sap__051010__in_c.r._map_ii_2850_exp
DESCRIPTION
Catalogo de repuestosTRANSCRIPT
-
MAP I I 2850
Spare parts catalogue
S E L F P R O P E L L E D S P R A Y E R
( E x p o r t v e r s i o n )
P L A S . A . S a n t a F e 4 1 9 S 2 5 2 0 C Z I L a s R o s a s S a n t a F e A r g e n t i n a T e l . ( 5 4 ) 0 3 4 7 1 4 5 1 6 5 5 S p a r e p a r t s ( 5 4 ) 0 3 4 7 1 4 5 0 2 1 8 r e p u e s t o s @ p l a . c o m . a r| | | | | | | | |
Part N: 29300 SAP
-
PLA is pleased to thank you for trusting our manufactured machines and renews its commitment improving both the performance and the operative safety of the machines.
The design of the machine you have just bought follows PLAs indus-trial philosophy: permanent renewal and improvement of our manufac-turing process, and mainly of our PLA machinery line.
In order to take genuine advantage of the perfomance of this ma-chine, and before working with it, we suggest that you should read the Operators Manual thoroughly which is also available with this Cata-logue of Spare Parts at: www.pla.com.ar.
You will find a guide to its operation under different work conditions, to its maintenance, transport, and conservation, and to warnings and re-quirements related to the operators and third parties personal security, and also the environment.
The Operators Manual complements the training received upon de-livery of the machine. In case you need to receive any additional infor-mation or make any suggestions, please call us: 0810 4444 752.
The Catalogue of Spare Parts includes precise and specific informa-tion regarding the spare parts which integrate your equipment. With-out prejudice to our policy to improve our products permanently, PLA reserves its right to introduce modifications. It does not imply any obli-gation on previously manufactured products. Thus, the content of this Catalogue of Spare Parts is updated upon its printing, and modifications without prior notice may occur.
However, you will be able to find all updated versions of the Cata-logue of Products and the Operators Manual at www.pla.com.ar.
You should write down or remember the information about the iden-tification of your machine. In order to provide you with a prompt re-sponse, we suggest that you should write that information on the chart below in case you need spare parts or technical assistance.
Please contact us:PLA S.A. / Santa Fe 419 / S2520CZI Las Rosas / Santa Fe / Argentina
Telephones: (54) 3471 451655 / Fax: (54) 3471 451618Direct Line: 0810 4444 752 / Spare Parts: (54) 3471 450218
Or visit www.pla.com.ar for an updated list of Professional Assistants
Modelo
N de serie de la mquina
N de serie del motor
Fecha de entrega:
Propietario:
Model
Machine serial number
Engine serial number
Date of delivery
Owner
-
Index
1 CABIN, COMMANDS, AND ACCESS Cabin (components) ............................................................................... 1 - 3 Cabin (accessories and instrumental) ..................................................... 1 - 5 Cabin (gear lever, brake pedal and clutch) .............................................. 1 - 7 Fairings, ladder, and footbridges ............................................................ 1 - 9 Electrical circuit ..................................................................................... 1 - 11 Lights, beacons, and night kit ............................................................... 1 - 13
2 - CHASSIS Chassis for rear boom ............................................................................ 2 - 3 Trailer lance ............................................................................................ 2 - 5 Rear boom (support) .............................................................................. 2 - 7 Rear boom (fixed) ................................................................................... 2 - 9 Rear boom (tilted) .................................................................................. 2 - 11 Neumatic system .................................................................................. 2 - 13
3 - PROPELLER Admission, exhaust, and fuel tank ......................................................... 3 - 3 Cooler system, fuel filter and oil ............................................................ 3 - 5 Gear box and clutch ............................................................................... 3 - 7 Differential and parking brake ................................................................ 3 - 9 Diferential and parking brake with mechanical wheel tread (TVM) ....... 3 - 11 Front axe and steering system .............................................................. 3 - 13 Front axe and set of wheels .................................................................. 3 - 17 Front axe and steering system with mechanical wheel tread (TVM) .... 3 - 15 Front axe and set of wheels with mechanical wheel tread (TVM) ........ 3 - 19 Rear gear slope (upper) ......................................................................... 3 - 21 Rear gear slope (lower) ......................................................................... 3 - 23 Rear gear slope (upper) with mechanical wheel tread (TVM) ............... 3 - 25 Rear gear slope (lower) with mechanical wheel tread (TVM) ................ 3 - 27
4 - HYDRAULIC SYSTEM Hydraulic system for rear boom ............................................................. 4 - 3
Hydraulic system tank 140 L .................................................................. 4 - 5
38 L and 52 L hydraulic pump and suction filter ......................... 4 - 7 Priority valve, cylinder and steering bowl ............................................ 4 - 9 Priority valve, cylinder and steering bowl (TVM) ................................... 4 - 11 CETOP 5 ................................................................................................ 4 - 13
5 SPRAYING SYSTEM Product pump and primary filter ............................................................. 5 - 3
Product pump (disassemble) .................................................................. 5 - 5
Centrifugal load pump ............................................................................ 5 - 7
Centrifugal load pump (disassemble) ..................................................... 5 - 9
Main tank (inputs) .................................................................................. 5 - 11
Main tank (outputs) ............................................................................... 5 - 13
Auxiliary front tank ................................................................................ 5 - 15
Stop valve set and regulation. Mixing cone .......................................... 5 - 17
Wings and smaller wings (28 m) ........................................................... 5 - 19
Spraying line (boom) .............................................................................. 5 - 21
Spraying line (wing) ............................................................................... 5 - 23
Spraying line (small wing and smaller) .................................................. 5 - 25
-
1 - 2MAP II 2850 exp. - October 2010
8
9
37 383635
34
32
33
28
10
1314
15
16
17
1112
27 26 25
22
23
24
2120
18
3119
1
7
6
2
3
5
4
29
30
-
MAP II 2850 exp. - October 2010 1 - 3
1 Armored cut off current 17676
2 Starting engine wire to current cut off (negative) 609935
3 Battery wire to starting engine (positive) 609932
4 Battery 12 V - 140 Amp/h 17362
5 Battery wire to cut off (negative) 609933
6 Cut off wire to chassis (negative to mass) 609934
7 Bolt W 1/2x 3/4 13004
8 Roof cover w/code
9 MAP II 4000 H Cabin 28999
10 Left rear glass 14223
Right rear glass 14222
11 Thermostat A.C. 27865
12 Air blower set A.C. 27866
13 Cooler unit A.C. 27863
14 Hose 5/16 x 3,46 m A.C. 27864
15 Fan A.C. 27867
16 Activated carbon filter 17985
17 Recycling grill 27868
Set A.C. Electrair 18003
18 Door damper cylinder 13843
19 Door handle cabin PMV 16806
20 Rearview mirror arm w/code
21 Rearview mirror w/code
22 Right lateral glass 14171
Left door glass 14187
23 Fixing suplement 16776
24 Fixing nut 16774
25 Fixing screw 16775
26 Wind excluder 15032
27 Door drawer w/code
28 Under cabin excluder 15123
29 Bolt NF 9/16x 31/2 with double plain washer and lock nut 13030
30 Yellow wedge set 15012
31 Passengers seat (P002386-RO) w/code
32 Rubber carpet w/code
33 Windscreen glass 14192
34 Windscreen wiper 17336
35 Windscreen wiper arm 17337
36 Windscreen engine 17335
37 Sunshade w/code
38 Side cabin cover 14239
N ref. Name Code SAP N ref. Name Code SAP
Cabin (components)
-
1 - 4MAP II 2850 exp. - October 2010
BLAUPUNKT
MELBOURNE C34
A
C
B
D
E
IV
I I
III
I
V
IV
F
19
14
9
4
15A
3A
15A
15A
18
13
8
3
15A
15A
25A
15A
17
12
7
2
15A
15A
15A
15A
16
11
6
1
15A
10A
3A
20A
20
15
10
5
15A
15A
5A
10A
30A
30A
30A
A
B
D
I I
I
V
VI
E
IVIII
F
10A
10A
10A
10A
10A
10A
5A
5A
10A
10A
5A
3A
5A
5A
3A
10A
10A
15A
C
19
14
9
4
18
13
8
3
17
12
7
2
16
11
6
1
20
15
10
5
Cal
TANK - Control
Quit
3334
27
26
25
24
32
18
19
20
35
23
36
1 2
54
17
6 7
8
3
31
21
22
TEMPERATURA
SI
NO
29
ORLAN ROBER
0 12060
ORLAN ROBER
60 16590 120
ORLAN ROBER
1112 1614
ORLAN ROBER
V LL1/2
ORLAN ROBER
1/10
HORAS
P
2
4 8
10
20
6
75100
125
150
25
50
0
9
10
11
12
13
14
15
16
28
30TACOMETRO
ORLAN ROBER R.P.M.
seal
38 37
-
MAP II 2850 exp. - October 2010 1 - 5
1 Basic Top Terminal 17794
2 E.C.U. Sprayer 17784
3 E.C.U. Engine 17785
4 Central Bus Mller 17787
5 E.C.U. Chasis (with variable tread width) 17786
6 Tank Control 17791
7 Flow meter 17788
8 Speed sensor 17796
9 Fuel level 18030
10 Voltimeter 18032
11 Oil pressure 18031
12 Engine temperature 18029
13 Instrument 4 LED 27861
14 Instrument 5 LED 27859
15 Mecanic manometer (neumatic system) 27860
16 Ourmeter 27858
17 Joystick Mller 17790
18 Console lid w/code
19 Key w/code
20 Key w/code
21 Parking brake off valve 14949
22 Hose Festo 6 x 1 16562
23 Console w/code
24 Manual acelerator set (Tuthill super confort) 151897
25 Wire gear box morse 18207
26 Wire gear box morse 18208
27 Rubber bellows (joystick) 15126
28 Grid AC w/code
29 Command AC (cabin) 27869
30 Digital tachometer 17180
31 Plafond 17903
32 Stereo radio antenna 17371
33 Radio stereo 17446
34 Fuse pannel belongs to set 19025
35 Speaker set 6 17447
36 Seat ISRI Full (P002594-RO) w/code
37 Track Leader (antenna) 28252
38 Track Leader (ligths panel) 27613
N ref. Name Code SAP N ref. Name Code SAP
Cabin (accessories e instruments)
-
1 - 6MAP II 2850 exp. - October 2010
9
10
12 13
1514 16
19
18
20
17
11
8
7
6
30
318
910
1134
35
34
37
35
36
38
33
14
29
28
5
27 26 25
22
23
21
24
32
1
2
3 4
-
1 Acelerator bellow 15052
2 Acelerator pedal with rubber w/code
3 Cable acelerador de mano (P 000920 - 00) w/code
4 Foot acelerator wire 14934
5 Housing pedal covers 14228
6 Pedal pin 14233
7 Brake pedal set 14231
8 Brake pusher 14236
9 Boomerang pin w/code
10 Boomerang w/code
11 Push pin piston 20891
12 Stop bulb 17685
13 Brake server RG R - 0625 14947
14 Cristal hose 6 x 10 15166
15 Orientable 16 mm 14812
16 TOM 16 (10064 - M16) 11866
17 Aluminium washer 14.5 x 20 x 1.3 13573
18 Brake pump 14952
19 Brake nut B21 3/16 14859
20 Copper pipe 3/16 14831
21 Brake fluid reservoir 14808
22 Elbow 90 (900) 941 - 4 - 4 11799
23 Hose 1/4 R1 x 650 HG - HG 12090
24 Regufilter 14942
25 Steering wheel set 17366
26 Hose 1/4 R1 x 800 HG - HG 12068
27 Elbow 90 (900) 941 - 4 - 4 11799
28 Pedal pusher rod 14230
29 Clutch pedal set 14232
30 Pedal support w/code
31 Below rods w/code
32 Steering colummn with 3 movements 18177
33 Clutch pump (PMV 000275-RO) w/code
34 Cooper pipe 5/16 14830
35 Clutch hose (PMV 000845-RO) w/code
36 Hose 1/4 R1 x 800 HG - HG 12068
37 Hidroneumatic server w/code
38 Clutch pusher (PMV 000479-R2) w/code
N ref. Name Code SAP N ref. Name Code SAP
Cabin (gear lever, brake pedal and clutch)
MAP II 2850 exp. - October 2010 1 - 7
-
1 - 8MAP II 2850 exp. - October 2010
5
23
4
1
6
9
410
4
11
7
8
4
13
12
14
15
-
MAP II 2850 exp. - October 2010 1 - 9
1 Engine cover set 152242
2 Blind rubber ring 15121
3 Toolbox and A.C. cover 14113
4 Screw 1/4 14 x 25 HWH W3 quick seal with plain washer 12927
5 Right yellow apron 14072
6 Right yellow extensor 14071
7 Left footbridge with handle 152250
8 Rear cover 13959
9 Bolt W 3/8x 1 with double plain washer and lock nut 12975
10 Left yellow extensor 14070
11 Left yellow apron 14073
12 Gear Z = 28 M2 21041
Sheave for cogged rack 21046
Cogged rack 3/4 M2 155698
Plastic cover for ladder 14199
13 Hydraulic sliding ladder 153059
14 Handrails for hydraulic ladder 21040
15 Rear footbridge w/code
N ref. Name Code SAP N ref. Name Code SAP
Fairings, ladder, and footbridges
-
1 - 10MAP II 2850 exp. - October 2010
-
MAP II 2850 exp. - October 2010 1 - 11
Kit electric system BT 2850 exp. 152211
1 Cabin installation (P000381) 17740
2 Chassis installation (engine sector) belongs to set: 17741
3 Chassis installation (fuel sector) belongs to set: 17741
4 Chassis installation (rear sector) belongs to set: 17741
5 Chassis installation (engine/tank sector) belongs to set: 17741
6 Steering column installation 17592
7 Rear boom installation 17550
N ref. Name Code SAP N ref. Name Code SAP
Electric system
-
1 - 12MAP II 2850 exp. - October 2010
213
4
12
5 9
8
7 6
13
11 10
-
MAP II 2850 exp. - October 2010 1 - 13
1 Floodlight Hella wide angle (P000380) 17949
2 Floodlight Hella spot (P000379) 17948
3 Turning beacon 17409
4 Working highlight VIC w/code
5 Rear floodlight (left) (rear boom) 14190
Rear floodlight (right) (rear boom) 14191
6 Rear floodlight (left) (front boom) 19045
Rear floodlight (right) (front boom) 19036
7 Rear round white rear highlight 17695
8 Rear round yellow highlight 17696
9 Rear round red highlight 17693
10 Round highlight 15 W (Night kit) 17851
11 Highlight VIC 684 17852
12 Front double highlight, amber (set) 17253
13 Highlight A y B 356 17760
N ref. Name Code SAP N ref. Name Code SAP
Lights, beacons, and night kit
-
2 - 2MAP II 2850 exp. - October 2010
1
2
4
3
5
6
7
8
-
MAP II 2850 exp. - October 2010 2 - 3
1 Crossing for radiator support 159791
2 Bolt W 5/8 x 13/4 with counter nut 13113
3 Front crossing for engine support 159759
4 Rear crossing for engine support 159756
5 Bolt W 1/2x 3/4 with grower washer 13004
6 Crossing for front fix of product tank 159816
7 Chasis MAP II 3250 BT 160796
8 Support for mixer cone Full BT 27530
N ref. Name Code SAP N ref. Name Code SAP
Chasis for rear boom
-
2 - 4MAP II 2850 exp. - October 2010
3
13
4
11 12
11 1514
10 9
7
8
2
6
3
5
1
2
-
MAP II 2850 exp. - October 2010 2 - 5
1 Pipe for union back machine - lance 153885
2 Fast pin 4 x 90 for bolt 13619
3 Bolt minor bolt lance - back 18929
4 Bolt 3/4x 31/2 NF G5 with lock nut 13134
5 Tow bar set 18939
6 Mobile minormajor bolt movil tow bar - back 18930
7 Mobile tow bar 18863
8 Spring spine DIN 1481 6 x 36 13624
9 Wrist fixing bolt with tow bar 22 x 107 12849
10 Tow bar shackle 18766
11 Double R pin 4 x 80 25 mm 13617
12 Hydraulic jack base bolt 25 x 162 154434
13 Hidraulic jack base 18827
14 Hydraulic cylinder 3x 305 x 45 11279
15 Double pin bolt cylinder 12839
N ref. Name Code SAP N ref. Name Code SAP
Tow lance
-
2 - 6MAP II 2850 exp. - October 2010
5
6
7
89
11
10
1
4
2
3
-
MAP II 2850 exp. - October 2010 2 - 7
1 Plain washer 25 mm 13569
2 Spring spine 6 x 50 13625
3 Boom lifter cylindrical bolt 25 x 200 19804
4 Rear boom support 160343
5 Quick pin 6 x 50 13682
6 Boom secure bolt 25 x 320 153863
7 Bolt NF 5/8x 7 1/2 G 5 13034
8 Hexagonal lock nut NF 5/8 with plain washer 13078
9 Special screw NF 5/8 13286
10 Hexagonal nut NF 5/8 high G 5 with plain washer and grower 13057
11 Hydraulic cylinder 3x 1.530 mm 11319
N ref. Name Code SAP N ref. Name Code SAP
Rear boom (support)
-
2 - 8MAP II 2850 exp. - October 2010
1
10
12
13
15
15
16
16
14
11
17
18
19
7
8
96
5
5
4
2
3
9
-
MAP II 2850 exp. - October 2010 2 - 9
1 Rear fixed boom set 160222
2 Grilon plate 125 x 180 mm 19963
3 Mortise headed screw 1/4x 1 with hexagonal nut and washer growerr 13357
4 Leader pipe 60 x 60 x 5 154171
5 Grilon plate 50 x 100 mm 19965
6 Mortise headed screw 1/4x 3/4 13356
7 Bolt 5/8x 5 NF with plain washer 13125
8 Fix boom rear plate 10259
9 Separating plate boom leader 20730
10 Nut NF 5/8 with plain and grower washer 13057
11 Bolt NF 3/4x 5 1/2 G5 with grower washer and lock nut 13107
12 Fix plate for command support 160491
13 Support set ECU Sprayer 161127
14 Support set manifold/pneumatic box 161128
15 Grilon for tilt boom 153946
16 Mortise headed screw W 1/4x 1 G5 13357
17 Vertical pipe for fix boom 153941
18 Elastomer 20980
19 Bolt NF 3/4x 5 1/2 G5 with grower washer and lock nut 13107
N ref. Name Code SAP N ref. Name Code SAP
Rear boom (fixed)
-
2 - 10MAP II 2850 exp. - October 2010
1
3
45
2
1 6 7
8
30
9
10
11
12
13
14
24
15
22
19
2323
18
1617
17
20
21
19
9
2826
29 28
26
26
27
25
2
-
MAP II 2850 exp. - October 2010 2 - 11
1 Bolt. NF 3/4 x 4 G5 13136
2 Nut M 25 x 1.5 G 5 slump 13401
3 Lock nut 3/4 NF G 5 13079
4 Elbow 90 (900) 941-4-4 spike 1.00 mm +/- 0. 11974
5 Open cylinder winds 3 x 408 Cosmo 21858
6 Center pin rocker 28323
7 End pin rocker 28322
8 Rocker set 159676
9 Lock boom set 151776
10 Body suspension rod 27115
11 Threaded lock 20970
12 Elastomer 27118
13 Spring cap wings 27109
14 Lock system 20971
15 Block rod end suspension 27116
16 Exterior rocker rod set 150174
17 Rocker rod bushing set 19790
18 Internal rocker rod bushing 150127
19 Spring spine DIN 1481 6 x 50 13625
20 Rocker rod pin 150175
21 Bolt W 3/8x 3/4 G5 with grower washer 12974
22 Locking rocker rod pin 19660
23 Washer 153934
24 Locking tilt bushing 153933
25 Small pin cylinder 220 for locking 19659
26 Spring spine DIN 1481 6 x 36 13624
27 Elbow 90 941- 4 - 4 11799
28 Pin cylinder lock boom 19649
29 Cylinder 21/2 x 220 11320
30 Fix boom set MAP II 4000 BT 160222
N ref. Name Code SAP N ref. Name Code SAP
Rear boom (tilted)
-
2 - 12MAP II 2850 exp. - October 2010
5
6
34
6
36
35
337
CABINA7
14
8
5
9
10
1
21
3
4
7
5
12
23
56
13
624
25
6
28
29
26
27
13
11
66
7
6
13
5
7
56
14
6
7
13
6
32
8
10
22
2018
17
15 16
19
21
7
315
6
30
13
610
-
N ref. Name Code SAP N ref. Name Code SAP
Neumatic system
MAP II 2850 exp. - October 2010 2 - 13
1 Plain sling (330 mm) 18476
2 Separator bushing 154075
3 Bolt 9/16 UNF x 31/2 G5 with lock nut 13030
4 Damper Sachs (front) 18472
Damper Sachs (rear) 18471
5 Quick coupling L M 1/4 - 18 NPT 14790
6 Hose Tecalan 8 mm (per meter) 14794
7 Quick coupling M 1/4 - 18 mm NPT 14789
8 Lung FERVIAIR 06 - 4720 RAC 14743
9 Level valve (front right) 050 050 w/connection 14746
10 Extensor level valve 14748
11 Manometer 50 mm - 10 kg. 14703
12 Polyamide pipe 154185
13 Quick coupling T lat. 1/4 - 18 mm NPT 22034
14 Air pipe crossing chasis 19572
15 Pipe w/code
16 Hose 3/4 w/code
17 Nipple 14741
18 Racord 14738
19 Clamp 1 13700
20 Hose Oilpress 25 mm - 1 15143
21 Niple in (21 - 10 - 03.00 - 04) 14739
22 Niple out (21 - 10 - 03.00 - 95) 14740
23 Governor valve 78209 - 70 (Knorr) 14715
Repair kit (governor valve Knorr) 14756
24 Left lateral air pipe (front boom) 19571
25 Left lateral air pipe (rear boom) 21002
26 Threaded body ACM 1/4 - 1012 (quick coupler) 14727
27 Air distributor 14723
28 Drainage manual valve 25/85380 14722
29 Air tank 14716
30 Level valve (rear) w/connection (left) 14745
31 Solenoid high/low air 22112
32 Level valve (rear) w/connection (rigth) 14730
33 Level valve (front) w/connection 14745
34 Cabin air lung 18482
35 Quick coupling T 1/4 - 18 NPT 14792
36 Cabin damper 18487
-
3 - 2MAP II 2850 exp. - October 2010
8
9
10
12
13
14
1
15 1620
21
17
18
19
74
6
4
5
4
311
2
-
MAP II 2850 exp. - October 2010 3 - 3
1 Holder air filter 156371
2 Air filter easel support 156143
3 Admission hose w/code
4 Clamp 100 - 120 13724
5 Admission T w/code
6 Admission hose w/code
7 Air filter restricction bulb w/code
8 Pipe hubcap 22056
9 Air filter coupling pipe 22276
10 Clamp 100 - 120 13724
11 Hose w/code
12 Air filter 18313
13 Filter security element (15 m3) 18345
14 Filter element (15 m3) 18344
15 Filter cap belong to 18313
16 Wing nut belong to 18313
17 Silencer w/code
18 Exhaust clamp 3 13727
19 Support fuel tank 28720
20 Fuel tank 28717
21 Rubber band 5 x 25 mm 15004
N ref. Name Code SAP N ref. Name Code SAP
Admission, exhaust, and fuel tank
-
3 - 4MAP II 2850 exp. - October 2010
4
3
3
3
9
11
7
8
10
6
3
5
21
17
13
1615
14
14
12
29
26
25
22
21
19
24
23
20
18
28
27
2827
28
-
MAP II 2850 exp. - October 2010 3 - 5
1 Radiator 18258
2 Radiator indicted w/code
3 Clamp (70 - 80) 13728
4 Upper radiator hose 15151
5 Connecction w/code
6 Hose w/code
7 Elbow water/engine w/code
8 Hose w/code
9 Bolt M 10 x 80 with lock washer 13206
10 Wing 24 22078
11 Separator palette 155516
12 Radiator tensioner 151729
13 Bolt NF 9/16 x 4 G5 13031
14 Support (yellow) SH - A - 75 15012
15 Ear support engine 22242
16 Bolt W 3/8 x 1 G5 12975
17 Radiator support 156088
18 Support (yellow) SH - A - 75 15012
19 Bolt NF 9/16 x 4 G5 13031
20 Rear rubber support engine (red) 15075
21 Legs support w/code
22 Legs support Cummins 150 156092
23 Clamp (70 - 80) 13728
24 Connection hose w/code
25 Botton pipe intercooler w/code
26 Hose w/code
27 Connection hose w/code
28 Clamp (70 - 80) 13728
29 Hose w/code
N ref. Name Code SAP N ref. Name Code SAP
Cooler system, exhaust, and oil filter
-
3 - 6MAP II 2850 exp. - October 2010
2 3
4
5
6
7
9
12 11
1314
10
8
1
17
16 15
18
19
20
21
22
25
20
26
24
23
-
MAP II 2850 exp. - October 2010 3 - 7
1 Gear box set Eaton FS 4205 A 18193
2 Clutch bellows fork 15053
3 Flywheel cover 22247
4 Clutch ball pin F100/600 18228
5 Clutch fork for F 100/600 18227
6 Sphere with thread W 3/8 154428
7 Extension clutch fork 156069
8 Mechanical clutch pipe 22224
9 Clutch spring 609640
10 Disk and clutch plate 13 67018
Plate clutch 13 67012
Disk clutch 13 67008
11 Bolt Ford n BA 10057-S2 12930
12 Bolt W 3/8 x 1 G5 12975
13 Clutch bearing 1087 12518
14 Bearing clutch holder 12770
Set bearing and holder clutch 19148
15 Bolt allen M 10 x 1,5 x 45 22166
16 Bolt allen W 1/4x 11/2 G10 with lock nut 13188
17 B.C.E. NF 9/16x 11/2 with washer grower 13271
18 Bronze bushing for wheel engine F 100/600 12811
19 Locknut 9/16 NF G5 13076
20 Rear damper wedge engine (red) 15075
21 Bolt 9/16x 4 NF 13031
22 Plain washer 9/16 13565
23 Legs support 156091
24 Bolt Ex W 9/16 x 1 3/4 G5 13424
25 Locknut 9/16 NF G5 13076
26 Legs support 156092
N ref. Name Code SAP N ref. Name Code SAP
Gear box and clutch
-
3 - 8MAP II 2850 exp. - October 2010
1
21/A
3
4
20
21
6
19
18
17
16
15
14
13
12
10
9
5
87
11
2223
24
28
27
2526
-
MAP II 2850 exp. - October 2010 3 - 9
1 Rear axle set (wide trail 2,10 m) 150247
Rear axle set (wide trail 2,625 m) 150555
1/A Diferential EATON 19050 18460
Pneumatic parking brake set (incl. items: 2, 3, 4, 5, 6 and 7) 28532
2 Air lung belong to set 28532
3 Base plate tap belong to set 28532
4 Brake liningholder belong to set 28532
5 Brake lining belong to set 28532
6 Friction rim belong to set 28532
7 Locknut 3/8 NF 13070
8 Spider CRC - 180 (34.9 x 106.3) Dodge 800/Chevrolet 14414
9 Clamp 23614 14412
10 Sliding fork P/3000 14410
11 Screw X - 8 - 699 14413
12 Grooved (3 - 53 - 451) Spicer 14417
13 Propelled shaft (balanced) 14423
14 Fixed fork (3 - 28 - 367) Spicer 14402
15 Spider CRC 104 (30.2 x 106.3) Chevrolet, Ford F600/7000 14397
16 Plate serie 1410 14950
17 Nut pinion with bevelled plain washer belong to set 18460
18 Seal core differential 12632
19 High/Low engine (pneumatic) 18451
20 Quick fitting for parking brake 14988
21 Hose Festo 6 x 1 for parking brake 16562
22 Ball joint 11/4 (right thread) 18573
23 Nut W 11/4 (right thread) 18589
24 Nut W 11/4 (left thread) 18588
25 Ball joint 11/4 (left thread) 18574
26 Locknut 1 NF 13098
27 Ball joint bolt 19461
28 Tensioner set (rear) 151048
N ref. Name Code SAP N ref. Name Code SAP
Differential and parking brake
-
12
21
20
22
23
24
25
21
26 20
2728
2930
31 32 33 34 35 36
3
4
5
78
109
12
1413
1516
17
6
18
19
11
3738
39
4041
4042
43
45
44
49
50
5146
5253
54
5655
46
4847
3 - 10MAP II 2850 exp. - October 2010
-
MAP II 2850 exp. - October 2010 3 - 11
1 Diferential EATON 19050 18460
Pneumatic parking brake set (incl. items: 2 to 6) 28532
2 Air lung belong to set 28532
3 Base plate tap belong to set 28532
4 Brake liningholder belong to set 28532
5 Brake lining belong to set 28532
6 Friction rim belong to set 28532
7 Locknut 3/8 NF 13070
8 Spider CRC - 180 (34.9 x 106.3) 14414
9 Clamp 23614 14412
10 Screw X - 8 - 699 14413
11 Sliding fork P/3250 14410
12 Grooved (3 - 53 - 451) Spicer 14417
13 Propelled shaft (balanced) 14428
14 Fixed fork (3 - 28 - 367) Spicer 14402
15 Spider CRC 104 (30.2 x 106.3) 14397
16 Plate serie 1410 w/code
17 Nut pinion w/beve. plain washer belong to set 18460
18 Seal core differential 12632
19 High/Low engine (pneumatic) 18451
20 Bolt for ball joint 19461
21 Lockernut 1 NF alta 13098
22 Ball joint 11/4 (rigth) 18576
23 Nut (rigth) 18589
24 Rear tensored TVM 151078
25 Nut (left) 18588
N ref. Name Code SAP
Diferential and parking brake with mechanical wheel tread (TVM)
51 Seeger ring 50 x 2 DIN 471 12682
52 Plain washer 63 x 26 x 6,35 mm 20275
53 Locknut NF 1 13109
54 Spider holder belong to set 14419
55 Coupling spider TVM 14419
56 Spider (torque 770 kgm) 14418
26 Ball joint 11/4 (left) 18577
27 Allen bolt W 3/8 x 3/4 G10 13209
28 Register tap 10483
29 Screwed register cover 18838
30 Griln register 154280
31 Rear axle (with variable wheel tread) 151103
32 Bolt 9/16 UNF x 31/2 G5 w/locknut 13030
33 Plain sling 18476
34 Bushing 154075
35 Lung 14743
36 Damper Sachs 10437 18471
37 Bolt 3/4 x 1 1/2 UNF G5 22172
38 Sealing Eaton 20365
39 Grooved shaft (short) Eaton 19050 TVM 20366
Grooved shaft (long) Eaton 19050 TVM 20364
40 Bearing 32210 12542
41 Grooved shaft hub Eaton diferential 154953
42 Seal ring SAV LX 7147 12643
43 Bolt 3/8 NF x 1 G8 w/grower washer 13390
44 Locknut NF 1 13109
45 Plain washer 63x26x6,35 mm 20275
46 Grooved flange 20274
47 Seeger ring 95 x 3 DIN 472 12681
48 Bolt 3/8 NF x 1 G8 w/grower washer 13390
49 Rubber bellow 15099
50 Grooved shaft 20283
N ref. Name Code SAP N ref. Name Code SAP
-
3 - 12MAP II 2850 exp. - October 2010
132 4 5 6
87 9
34
6
9
10
14
16
17
18
18
20
19
11
11
12
13
2
11
12
14
15
2
8
9
-
MAP II 2850 exp. - October 2010 3 - 13
1 Front axle set 160721
Front axle set (wheel tread 2.625 mm) 160781
2 Bolt for front ball joint 19546
3 Ball joint 11/4 (rigth) 18576
4 Nut W 11/4 12 hpp (rigth) 18589
5 Front tensioner set 151046
6 Nut W 11/4 12 hpp (left) 18588
7 Rear ball joint bolt (chasis) 19461
8 Ball joint 11/4 (left) 18577
9 Locknut 1 NF (high) 14 hpp G5 13098
10 Transversal front tensioner set 18860
11 Cotter pin 4 x 50 13650
12 Steering swivel (female) M 25 x 1,5 18559
13 Steering hidraulic cylinder 21/2 x 250 x 1 11305
Bar extension (for wheel tread: 2.625 mm) 154387
14 Steering extreme (left thread) M 30 x 1,5 18560
15 Steering arm (left) 19354
16 Nut (left) M 30 x 1,5 13299
17 Steering bar 153748
Steering bar (for wheel tread: 2.625 mm) 154386
18 Steering extreme (rigth thread) M 30 x 1,5 18561
19 Nut (rigth) M 30 x 1,5 13298
20 Right steering arm 19353
N ref. Name Code SAP N ref. Name Code SAP
Front axle and steering system
-
MAP II 2850 exp. - October 2010 3 - 14
7
5
4
6
34
36
35
3231
8
302928
12
13
14
15
11
9
23
10
26
12
27
13
25
24
22
21
20
17
18
19
16
4 2
4
3
2
1
33
-
MAP II 2850 exp. - October 2010 3 - 15
1 Front axle 160721
Front axle (track width 2,625 m) 160781
2 Bolt W 3/8x 11/4 with nut, plain washer and grower 12976
3 Front left mudguard holder 18874
Front right mudguard holder 18875
4 Bolt W 3/8x 11/2 with nut, plain washer and grower 12977
5 Rubber board mudguard 15026
6 Bolt W 5/16x 11/2 with nut, double plain washer and grower 12939
7 Front left mudguard with apron 13957
Front right mudguard with apron 13956
8 Straight nipple 1/8 BSP 13642
9 Pushing washer steering arm 11169
10 Adjust plain washer (thickness 4,5 mm) 27373
Adjust plain washer (thickness 2,5 mm) 27375
11 Left steering arm TD + 120 19354
Right steering arm TD + 120 19353
12 Castle nut W 13/4 special 20767
13 Cotter pin 6 x 95 13656
14 Pin DIN 6885 A 16 x 10 x 45 13677
15 Bearing 51116 27736
16 Rubber ring 98 x 108 x 9 mm 15095
17 Bolt 1/2 NF x 11/4 with washer grower 13256
18 Bolt 1/2 NF x 1 with washer grower 13006
19 Front left furrow opener 18660
Abresurco delantero derecho 18659
20 Axis tip 160634
21 Seeger ring DIN 472 125 -4 12672
22 Seal 7221 LX double lip 12638
23 Wheel bolt 5/8 NF x 21/4 G 8 13275
Wheel bolt 5/8 NF (track width 2.625 mm) 13278
24 Bearing 32213 12546
25 Bearing 30211 12541
26 Front wheel hub 19013
27 Alumminium cup 17033
28 Bolt W 1/4x 3/4 with washer grower 12917
29 Curved nipple 90 1/8 BSP 13643
30 Main gear bronce bushing barral 12812
31 Tyre 12,4 x 36 - 10 cloths 14498
Inner tube 12.4 x 36 enhanced 14516
32 Rim W 10 x 36 (disk 1/2) 14454
33 Supplement rim (track width 2.625 mm) 20371
34 Rim conical nut 5/8 G 5 L = 22 mm 13087
35 Wheel key FORD 350 200397
36 Wheel key bar 200446
N ref. Name Code SAP N ref. Name Code SAP
Front axle and set of wheels
-
12
3
4
5
1213
14
15
16
17
18
1815
17
1627
1312
25
26
23
24
7 8 9
10
6
10
11
11
22
1711
11
1819
20
21
3 - 16MAP II 2850 exp. - October 2010
-
MAP II 2850 exp. - October 2010 3 - 17
1 Hidarulic cylinder nut belong to set 18559
2 Cotter pin belong to set 18559
3 Steering arm (rigth) TVM 20303
Steering arm (left) TVM 20302
4 Slope set (left) TVM 401948
Slope set (rigth) TVM 401946
5 Rear bridge set 151204
6 Allen bolt 3/8 x 3/4 G10 13209
7 Register cup 10483
8 Screwed register cup 18838
9 Griln register 154280
10 Hidarulic cylinder 21/2 x 250 x 1 11305
11 Steering end (female) M25 x 1,5 18559
12 Ball joint 11/4 rigth screwed 18576
13 Nut 11/4 (rigth) 18589
14 Transverse front tensioner 150022
15 Nut 11/4 (left) 18588
16 Ball joint 11/4 (left) 18577
17 Locknut 1 NF 13098
18 Ball joint bolt 19461
19 Hidarulic cylinder 31/2 x 200 wheel tread opener 11297
20 Ball joint 11/4 rigth screwed female with nut 18556
21 Straight nipple 1/4 NF 13640
22 Wheel tread tensioner 18909
23 Castle nut 13/4 12951
24 Steering arm washer 11169
25 Cotter pin 6 x 95 13656
26 Washer adjustment (thickness 4,5) 27373
Washer adjustment (thickness 2,5) 27375
27 Front longitudinal tensor set 150021
N ref. Name Code SAP N ref. Name Code SAP
Front axle and steering system with mechanical variable wheel tread (TVM)
-
7 5
6
29
2827
8
9
25
26
11
12
13
20
23
12
24
1022
21
1918
17
16
15
14
21
3
4 2
4
4
3 - 18MAP II 2850 exp. - October 2010
-
MAP II 2850 exp. - October 2010 3 - 19
1 Front axle set TVM 151106
2 Bolt W 3/8x 11/4 with nut, plain and grower washer 12976
3 Front left mudguard holder 18874
Front right mudguard holder 18875
4 Bolt W 3/8x 11/2 with nut, plain washer and grower 12977
5 Rubber board mudguard 15026
6 Bolt W 5/16x 11/2 with nut, double plain washer and grower 12939
7 Front left mudguard with apron 13957
Front right mudguard with apron 13956
8 Straight nipple 1/8 BSP 13642
9 Main gear bronce bushing barral 12812
10 Cotter pin 6 x 95 13656
11 Pin DIN 6885 A 16 x 10 x 45 13677
12 Bearing 51212 12538
13 Rubber ring 98 x 108 x 9 mm 15095
14 Bolt 1/2 NF x 11/4 with grower washer 13256
15 Bolt 1/2 NF x 1 with grower washer 13006
16 Front left furrow opener 18660
Front left furrow opener 18659
17 Axis tip TVM (incluye items 10, 12 y 17 al 25) 160290
18 Seeger ring DIN 472 125 -4 12672
19 Seal 7221 LX double lip 12638
20 Wheel bolt 5/8 NF x 21/4 G 8 13275
21 Bearing 32213 12546
22 Bearing 30211 12541
23 Front wheel hub 19013
24 Alumminium cup 17033
25 Bolt W 1/4x 3/4 with washer grower 12917
26 Curved nipple 90 1/8 BSP 13643
27 Tyre 12,4 x 36 - 10 cloth 14498
Inner tube 12.4 x 36 enhanced 14516
28 Rim W 10 x 36 (disk 1/2) 14454
29 Rim conical nut 5/8 G 5 L = 22 mm 13087
N ref. Name Code SAP N ref. Name Code SAP
Front axle and wheels set with mechanical variable wheel tread (TVM)
-
3 - 20MAP II 2850 exp. - October 2010
1
2
3
35
2930
3132
33
34
36
37
38
40
41
42
39
18
19
20
21
13
2625
2728
22
23
24
9 10
8
7
6
4
5 11 12 13
17
16
14
15
-
MAP II 2850 exp. - October 2010 3 - 21
1 Bolt NF 5/8x 5 G5 with lock nut 13125
2 Rear tensioner 151050
3 Locknut 1 NF (high) 14 hpp G 13098
4 Tensioner ball joint (right screw) 18576
5 Ball joint bolt 19461
6 Nut W 11/4 x 12 hpp (right screw) 18589
7 Nut W 11/4 x 12 hpp (left screw) 18588
8 Tensioner ball joint (left screw) 18577
9 Rear gear slope (right) 18891
Rear gear slope (left) 18892
10 Rear right mudguard 13956
Rear left mudguard with apron 13957
11 Nut W 3/8 with plain washer and grower 13040
12 Rubber board mudguard 15026
13 Bolt W 5/16x 11/4 with nut, double plain washer and grower 12938
14 Left mudguard holder 18984
Right mudguard holder 18896
15 Bolt W 3/8x 1 with plain washer and locknut 12975
16 Bolt W 3/8x 11/4 with double plain washer and lock nut 12976
17 Bolt W 3/8x 1 1/2 with plain washer and locknut 12977
18 Bolt W 5/16x 3/4 with lock washer 12936
19 Upper cap slope 19451
20 Baffle cap slope 19452
21 Auxiliary nozzle set 150287
Nozzle holder simple (auxiliary nozzle) 15392
22 Nut with locker 18406
23 Top washer 155422
24 Conical bearing 32014 (Timken - SKF) 12543
25 Chain ASA 120 HE (step 1 1/2) 27979
26 Stud 1/2x 60 13380
27 Gear with hub 28550
28 Upper hub detent 6717 plate 12619
29 Suspension lung 14743
30 Synthetic fiber plain sling (330 mm) 18476
31 Divisory bushing 154075
32 Bolt 9/16 UNF x 31/2 G5 with locknut 13030
33 Bolt W 1/2x 1 1/4 G5 13007
34 Damper 10437/6 pp 1085 kg Sachs 18471
35 Male tap W 3/4 galvanized 16907
36 Bolt W 5/16 x 3/4 with washer grower 12936
37 Slope upper tap (alumminium) 17029
38 Palier A and B x 16 x 830 D 1/2 18438
Palier A and B para trocha 2.625 mm 18461
39 Cone 1/2 for studs 13355
40 Hexagonal nut 1/2 NF G5 13348
41 Spring spine DIN 1481 10 x 36 13634
42 Spring spine DIN 1481 6 x 36 13624
N ref. Name Code SAP N ref. Name Code SAP
Rear gear slope (upper)
-
3 - 22MAP II 2850 exp. - October 2010
7
8
9
654
2
3
1
10
27
28
26
23 24
25
1622
212019
14
18
17
16
13
15
1211
32
33
31
29
30
-
MAP II 2850 exp. - October 2010 3 - 23
1 Gasket rear hub 19705
2 Cotter pin 6 x 80 13655
3 Castle nut NF 2 G5 13099
4 Bearing SKF 32216 27763
5 Lower rear hub 27466
6 Bolt 5/8x 11/4 NF G5 13128
7 Caliper Stilmec 14905
Repairing set: piston, Oring, bellows, bleeder 14937
Brake pads 14906
8 Wheel bolt NF 5/8 x 21/2 G8 for wheel 13274
Wheel bolt NF 5/8 x 21/2 G8 for wheel (track width 2.625 mm) 13279
9 Rear hub shield final 27463
10 Nivel oil viewer 12329
11 Bolt W 5/16x 3/4 with washer grower 12936
12 Slope supervizing tap 19369
13 Bolt NF 1/2x 1 1/4 with washer grower 13256
14 Rear right furrow opener 18665
Rear left furrow opener 18666
15 Bolt NF 1/2x 1 with washer grower 13006
16 Male tap 1/2 galvanized 16906
17 Lower gearing Z30 28554
18 Seal LX NBR 27764
19 Bolt W 3/8x 1 1/4 with washer grower 13389
20 Calipe folder 10420
21 Bolt W 1/2x 1 1/4 with washer grower 13007
22 Bearing 32213 (Timken / SKF) 12546
23 Brake disk 18836
24 Inner tube 12.4 x 36 (enhanced) 14516
25 Tires 12.4 x 36 10 cloths 14498
26 Rim W10 x 36 (disco 1/2) 14454
27 Supplement rim (track width 2.625 mm) 20371
28 Conical nut NF 5/8 G5 13087
29 Bronce ferrule 14875
30 Copper pipe 14831
31 3-mouth connector (before 51091) 14966
32 Flexible 10492 14798
33 Brake nut 14859
N ref. Name Code SAP N ref. Name Code SAP
Rear gear slope (lower)
-
14
8
16
10
3
5
6
7 910
1112
1314
1115
17 18
19
20
21
22
3231
33
34
35
36
37
23 24 25 26
2930
2827
2
37 38
37
37
41
36
39
40
26
3 - 24MAP II 2850 exp. - October 2010
-
MAP II 2850 exp. - October 2010 3 - 25
1 Extensible connecting rod (female) 20362
2 Universal flange with bolt 14419
3 Spine (torque 770 kgm) 14418
4 Bolt belong to set 14419
5 Spine holder belong to set 14419
6 Locknut NF 1 13109
7 Plain washer 1 20275
8 Bolt W 1/2x 11/4 G5 13007
9 Grooved flange 20274
10 Ring seeger 95 x 3 DIN 472 12681
11 Seal SAV LX 7147 12643
12 Upper hub of rear slope 154868
13 Pinion Z 15 for chain 1 1/2 20273
14 Chain 1 1/2 ASA 120 14331
15 Bearing 6210 12562
16 Bearing 32210 12542
17 Cap 3/4 16907
18 Bolt 5/16x 3/4 w/grower washer 12936
19 Aluminnium cap slope 17029
20 Exterior upper hub rear slope 154869
21 Bolt W 3/8x 11/4 w/grower washer 13389
22 Rear slope (left) TVM 151179
Rear slope (rigth) TVM 151177
23 Bolt W 3/8x 11/4 with double plain washer and locknut 12976
24 Left mudguard holder (rear left) 18984
Left mudguard holder (rear rigth) 18896
25 Rubber board mudguard 15026
26 Bolt W 5/16x 11/4 with nut, double plain washer and grower 12938
27 Nut W 3/8 with plain washer and grower 13040
28 Bolt W 3/8x 1 1/2 with plain washer and locknut 12977
29 Rear mudguard (rigth) 13956
Rear mudguard (left) 13957
30 Auxiliary nozzle holder 150287
31 Ball joint 11/4 rigth 18576
32 Nut W 11/4 rigth 18589
33 Rear transversal tensile 150023
34 Nut W 11/4 left 18588
35 Ball joint 11/4 left 18577
36 Locknut 1 NF 13098
37 Ball joint bolt 19461
38 Wheel tread tensile 18909
39 Hydraulic cylinder 31/2 x 200 opening wheel tread 11297
40 Ball joint 11/4 female thread with nut 18556
41 Straight nipple 1/4 NF 13640
N ref. Name Code SAP N ref. Name Code SAP
Rear axle slope with mechanical variable wheel tread (TVM) (upper)
-
89
7
6
5
4
23
1
10
26
25
22
23
24
16
4
21
20
19
18
17
16
14
13
12
15
11
30
31
2927 28
3 - 26MAP II 2850 exp. - October 2010
-
MAP II 2850 exp. - October 2010 3 - 27
1 Gasket rear hub 19705
2 Cotter pin 6 x 80 13655
3 Castle nut NF 2 G5 13099
4 Conical bearing 32213 (Timken / SKF) 12546
5 Lower rear hub 18847
6 Bolt 5/8x 11/4 NF G5 13128
7 Caliper Stilmec 14905
Repairing set: piston, Oring, bellows, bleeder 14937
Brake pads 14906
8 Wheel bolt NF 5/8 x 21/2 G8 for wheel 13274
Wheel bolt NF 5/8 x 21/2 G8 for wheel (track width 2.625 mm) 13279
9 Rear hub shield final 18464
10 Nivel oil viewer 12329
11 Bolt W 5/16x 3/4 with washer grower 12936
12 Slope supervizing tap 20272
13 Bolt NF 1/2x 1 1/4 with washer grower 13256
14 Male tap 1/2 galvanized 16906
15 Lower gearing Z 37 20360
16 Seal SAV 7221 LX double lip 12638
17 Rear right furrow opener 18665
Rear left furrow opener 18666
18 Bolt NF 1/2x 1 with washer grower 13006
19 Bolt W 3/8x 1 1/4 with washer grower 13389
20 Calipe folder 10420
21 Bolt W 1/2x 1 1/4 with washer grower 13007
22 Brake disk 18836
23 Tires 12.4 x 36 6 cloths 14496
Tires 12.4 x 36 10 cloths 14498
24 Inner tube 12.4 x 36 (enhanced) 14516
25 Rim W10 x 36 (disc1/2) 14454
26 Conical nut NF 5/8 G5 for wheel L = 22 mm 13087
27 Bronce ferrule 14875
28 Copper pipe 3/16 14831
29 3-mouth connector (before 51091) 14966
30 Flexible 10492 14798
31 Brake nut 14859
N ref. Name Code SAP N ref. Name Code SAP
Rear axle slope with mechanical variable wheel tread (TVM) (lower)
-
4 - 2MAP II 2850 exp. - October 2010
1
2
3 51
43
4
42
5
6
7
8
59
10
2
1
47 46
46
23
25
26
48
16 17
15
7
8
11
52
12
49
13
50
25
14
27 28
2450
3234
33
53
353 27 26
53
54
31 30 29 28
55
56
40
41
39
38
3736
22
60
18
20
19
57 58 55 56 219
4445
-
MAP II 2850 exp. - October 2010 4 - 3
1 Cylinder 31/2 x 200 11297
2 TOM 16 mm 11866
3 Cylinder 13/8 lock wings 11308
4 Elbow 90 941 - 4 - 4 (esp.) 12444
5 Elbow 90 (900) L 948 - 6 - 6 11818
6 Elbow 90 (900) 948 - 6 - 6 11815
7 Elbow 45 (800) 848 - 4 - 6 11752
8 Tap 78 - 6 11823
9 Valve CETOP 3 double solenoid 12369
10 Valve antireturn double modular 11891
11 Adapter 748 - 8 - 6 11755
12 Cartridge SNRPS Kan 12019
13 Adapter 748 - 4 - 6 11729
14 Elbow 90 948 - 8 - 6 11816
15 Manifold for 5 CETOP 3 12443
16 Tee (1000) 1484 - 6 11753
17 Tee (1000) 1484 - 6 - 6 - 6 11756
18 Valve pipe CETOP 3 to valve 7 ways 19503
19 Valve pipe CETOP 3 to cylinder 19505
20 Valve pipe 3 ways to val. 7 ways 19504
21 Valve pipe 3 ways to boom cylinder 19506
22 Adapter 751 - 8 - 8 11673
23 Elbow 90 941 - 4 - 4 11799
24 Valve antireturn 11674
25 Adapter 741 - 8 - 8 11718
26 Adapter 741 - 4 - 4 11722
N ref. Name Code SAP
Hydraulic system for rear boom 1
53 Hose 1/4 R1 x 1900 HG - HG 12057
54 Hose 1/4 R1 x 3700 MF - MF 12067
55 Hose 1/2 R2 x 880 HG - HG 12103
56 Hose 1/2 R2 x 800 HG - HG 12118
57 Hose 3/8 R2 x 650 HG - HG 12101
58 Hose 3/8 R2 x 740 HG - HG 12102
59 Manifold p/ 4 CETOP 3 11839
60 Hose 3/8 R2 x 2200 HG - HG 12315
27 Distribuitor 4 ways 11910
28 Adapter 711 - 4 - 4 11858
29 PNH 1/4 11871
30 Tap female for PNH 1/4 11966
31 Tap male for PCH 1/4 11967
32 PCH 1/4 11870
33 Valve CETOP 3 double solenoid 12015
34 Valve CETOP 3 simple solenoid 12016
35 Tee (1000) 1414 - 4 - 4 - 4 11859
36 Cylinder hydraulic jack 3 x 305 x 45 11279
37 Tee male 14 - 8 - 8 11678
38 Elbow 90 911 - 8 - 6 11677
39 Valve (flow regulator) 3/8 11675
40 Adapter 741 - 8 - 6 11676
41 Lift cylinder (rear boom) 3 x 1530 11319
42 Hose 3/8 R1 x 1800 OJO 16 - HG 12312
43 Hose 3/8 R1 x 2800 OJO 16 - HG 12313
44 Hose 3/8 R1 x 3700 OJO 16 - HG 12311
45 Hose 3/8 R1 x 3850 OJO 16 - HG 11886
46 Hose 3/8 R2 x 500 HG - HG 12071
47 Hose 1/2 R2 x 500 HG - HG 12072
48 Hose 1/4 R1 x 400 HG - HG 12082
49 Hose 1/4 R1 x 650 HG - HG 12090
50 Hose 1/4 R1 x 1200 HG - HG 12058
51 Hose 1/4 R1 x 2900 HG - HG 12085
52 Hose 1/2 R2 x 2000 HG - HG 11834
N ref. Name Code SAP N ref. Name Code SAP
-
4 - 4MAP II 2850 exp. - October 2010
1
2
3
12
13
6
8
1411
34
4
5
7
9
10
33
19
5
20
21 30
31
34
2426
25
28 28
29
27
33
32
35
30
23
22
17 18
15
16
3435
19
-
MAP II 2850 exp. - October 2010 4 - 5
1 Elbow 90 941 - 4 - 4 (inner 2 mm) 11872
2 Lift cylinder smaller wing 21/2 x 408 11358
3 Hose 1/4 R1 x 400 HG - HG 12082
4 Hose 1/4 R1 x 800 HG - HG 12068
5 Elbow 90 941 - 4 - 4 11799
6 Valve antireturn double pilot 12366
7 Adapter (700) 711 - 4 - 6 11943
8 Flow regulator for smaller wing 11892
9 Adapter (700) 751 - 4 - 6 11873
10 Staright pipe smaller wing (integral) 19514
11 Extension pipe for wing 19529
12 Hose 3/8 R2 x 2200 HG - HG 12315
13 Elbow 90 948 - 6 - 6 11815
14 Elbow 90 L 948 - 6 - 6 11818
15 Adapter (700) 751 - 4 - 4 I 11897
16 Elbow 90 941 - 4 - 4 (special) 11800
17 Tee (1000) 1114 - 4 - 4 - 4 12250
18 Hydroneumatic damper 11469
19 Lift cylinder 45 21/2 x 220 11320
20 Open wings cylinder 21/2 x 408 21858
21 Elbow 90 941 - 4 - 4 (inner 0,75 mm) 11974
22 Cylinder 2 x 205 mm 11293
23 Adapter 721 - 4 - 4 11712
24 Tap 78 - 6 11823
25 Manifold 7 ways for CETOP 3 12018
26 Elbow 45 (800) 848 - 4 - 6 11752
27 Valve CETOP 3 double solenoid 12015
28 Valve anireturn modular double 11891
29 Valve anireturn modular simple 12367
30 Hose 1/4 R1 x 1200 HG - HG 12058
31 Hose 1/4 R1 x 650 HG - HG 12090
32 Hose 1/4 R1 x 1900 HG - HG 12057
33 Hose 1/4 R1 x 2200 HG - HG 12062
34 Hose 1/4 R1 x 2900 HG - HG 12085
35 Hose 1/4 R1 x 2600 HG - HG 12089
N ref. Name Code SAP N ref. Name Code SAP
Hydraulic system for rear boom 2
-
4 - 6MAP II 2850 exp. - October 2010
11
14 15
12
8 25
17 18
26
20
24
13
14 15
16 22
23 21 18
20
19
18
10
9
17
77 776
5
4
3
2
1
aggregated for windtunnel equipment
-
MAP II 2850 exp. - October 2010 4 - 7
1 Tap of hydraulic oil tank with filter 11454
2 Oil level viewer with O ring 12187
3 Bolt W 5/16x 3/4 12936
4 PLA alumminium side tap 17021
5 O Ring side tap 219 x 3,5 11909
6 Tap RM 1/2 16906
7 Bolt W 5/16x 1 with double palin washer, grower and nut 12937
8 Hydraulic oil tank de 140 L 150056
9 Nut W 3/8 with washer grower 13040
10 Antivibration rubber wedge 15050
11 Elbow 90 (900) 911 - 12i - 12 11797
12 Curve 45 M-H 3/4 galvanized 16935
13 Low terminal 510 - 12 - 8c 11670
14 Low terminal (500) 510 - 12 16 11654
15 Clamp 1 13700
16 Hose Oilpress 1 (20 - 25) 15143
17 Hose 11/2 Oilaspir (38 mm) 15163
18 Clamp 11/4 - 11/2 13701
19 Low terminal 510 - CP - 001 11659
20 Metal spherical valve 11/2 15679
21 Low terminal 510 - P 002 11660
22 Hose 11/4 (from tank to suction filter) Oilaspir (32 mm) 15162
23 Metal spherical valve 11/4 15881
24 Clamp 3/8 13697
25 Hose Oilpress 1/2 15145
26 Low terminal (500) 510 - 24 - 20 11920
N ref. Name Code SAP N ref. Name Code SAP
Hydraulic system tank 140 L
-
4 - 8MAP II 2850 exp. - October 2010
12 3 4
5
2
8
169
2
1
2
7
5
4 3
19
2023
2221 2
1
6
6
10
12 11
18
26
28
34
29
31
30
33
32
27
1314
7
2
1
15
24
25
17
-
MAP II 2850 exp. - October 2010 4 - 9
1 Hose Oilaspir 38 mm (11/2) 15163
2 Clamp 11/4 - 11/2 13701
3 Low terminal (500) 510 - P - 002 NPT 1 11660
4 Bolt M 8 x 1,25 x 15 G8 13234
5 Suction filter with vacuometer (base) 12182
6 Low terminal (500) 510 - 20 - 24 11657
7 Filter element 15/125 VCI 11679
8 Low terminal (500) 510 - CP - 001 NPT 1 11659
9 Low terminal w/code
Set Tupac coupling hidraulic pump 156149
10 Tupac for crankshaft 155341
11 Tupac coupling M4 to flange 11595
12 Bolt allen W 7/16 x 11/4 G5 13439
13 Tupac for pump 155340
14 Spacer rod bolt 20676
15 Alluminium elbow (big) 11430
16 Elbow 90 w/code
17 Big foundry elbow with bolt allen and O ring w/code
18 Fix platen for hidraulic pump 20863
19 Pump 52 L with nut, grower washer and cotter pin w/code
20 Pump 38 L plain tap w/code
21 Bolt W 3/8 x 11/4 G5 12976
22 Hose 3/4 R2 x 1400 CR HG w/code
23 Adapter (700) 741 - 10 - 12 11981
24 Alluminium elbow (medium) 50347 11429
25 Foundry elbow with bolt allen and O ring w/code
26 Elbow 45 7/8- 14 UNF 22119
27 Hose 3/4 w/code
28 Rod tensor belt A.A. 19042
29 Tensor belt A.A. 19041
30 Compressor A.A. 17466
31 Hose 1/2 A.A. (compressor/ evaporator box) 27873
32 Hose 13/32 A.A. (compressor/condensator) 27872
33 Support A.A. w/code
34 Bolt M 10 x 170 13496
N ref. Name Code SAP N ref. Name Code SAP
38 L and 52 L hydraulic pump and suction filter
-
4 - 10MAP II 2850 exp. - October 2010
1
2
3
4
2
5
17
21
11
12
87
6 3
9 10
16
15
4
14
13
18
17
19
20
-
MAP II 2850 exp. - October 2010 4 - 11
1 Elbow 90 L 948 - 8 - L6 (72 mm) 11792
2 Elbow 90 948 - 8 8 11960
3 Bolt allen 5/16 x 2 1/2 with locknut and plain washer 13195
4 Codo 90 948 - 4 - 2 con O Ring 12130
5 Hose 1/2 R2 x 1.500 HG - HG 12323
6 Priority valve 7 bar 11995
7 Hose 1/2 R2 x 560 HG HG 12099
8 Hose Oilpress 20 - 13 mm 1/2 15145
9 Clamp 3/8 13697
10 Low terminal (500) 580 - 6 8 11672
11 Adapter 748 - 8 - 6 with O Ring 11755
12 Adapter 748 - 6 - 6 with O Ring 11731
13 B.C.E. W 3/8x 1 con arandela grower 12975
14 Steering unit with Low Sensing 12154
15 Hose 1/4 R1 x 650 HG - HG 12090
16 Hose 1/2 R2 x 1500 CR HG - HG 12323
17 Metrical oriented screw 16 mm x 1,5 11866
18 Alumminium washer 16 mm x 22 x 1,3 13574
19 Hose 3/8 R2 x 900 - 3/4 Jic 37 HG - Ring 16 11844
20 Hose 3/8 R2 x 1.100 - 3/4 Jic 37 HG - Ring 1612091
21 Steering cylinder 21/2 x 250 x 1 11305
N ref. Name Code SAP N ref. Name Code SAP
Priority valve, cylinder and steering bowl
-
4 - 12MAP II 2850 exp. - October 2010
1
2
4
5
223
21
19
22
9 13
12
6
3 4
11 10
7
15
17
20
8
5
16
18
2221
14
-
MAP II 2850 exp. - October 2010 4 - 13
1 Elbow 90 L 948 - 8 - L6 (72 mm) 11792
2 Elbow 90 948 - 8 8 11960
3 Priority valve 7 bar 11995
4 Bolt allen 5/16 x 2 1/2 with locknut and plain washer 13195
5 Elbow 90 948 - 4 - 2 with O Ring 12130
6 Hose 1/2 R2 x 560 HG - HG 12099
7 Hose 1/2 R2 x 2000 HG - HG 11834
8 Hose 1/4 R1 x 650 HG - HG 12090
9 Adapter 748 - 8 - 6 with O Ring 11755
10 Low terminal (500) 580 - 6 8 11672
11 Clamp 3/8 13697
12 Hose Oilpress 20 - 13 mm 1/2 15145
13 Adapter 748 - 6 - 6 con O Ring 11731
14 Hose 3/8 R2 x 900 - 3/4 Jic 37 HG - Ring 16 11844
15 Hose 3/8 R2 x 1300 OJO 16 - HG 12026
16 Steering unit with Low Sensing 12154
17 Hose 3/8 R2 x 2600 OJO 16 - OJO 16 11779
18 Bolt W 3/8x 1 with washer grower 12975
19 Steering cylinder (left) 11316
20 Steering cylinder (rigth) 11315
21 Metrical oriented screw 16 mm x 1,5 11866
22 Alumminium washer 16 mm x 22 x 1,3 13574
23 Hose 1/2 R2 x 1.500 HG - HG 12323
N ref. Name Code SAP N ref. Name Code SAP
Priority valve, cylinder and steering bowl (TVM)
-
4 - 14MAP II 2850 exp. - October 2010
1
1-1
1-2
5
3
2
3 4
1312
712
11
10
9
86
11
14
15
16
17
18
21
15
20
19
1-3
al motor hidrulicode bomba de carga
de bomba 52 L
-
MAP II 2850 exp. - October 2010 4 - 15
1 Electrovalve CETOP 5 11830
1 - 1 Solenoid coil 12 V belong to set 11830
1 - 2 Valve set belong to set 11830
1 - 3 Buln allen M 6 x 1 x 40 belong to set 11830
2 Manifold CETOP 5 11831
Solenoid coil 12 V (for spool 25 mm)mm 12294
Solenoid coil 12 V (for spool 31 mm) 12158
Conector DIN valve CETOP (rojo) 17660
Conector DIN valve CETOP (negro) 17659
Repair kit CETOP 5 12283
Electrovalve CETOP 5 (simple solenoid) 12330
3 Elbow 90 941 - 10 8 11832
4 Hose 3/4 R2 x 1.200 CR HG 12318
5 Hose 3/4 R2 x 1.400 C.R. HG 11829
6 Elbow 90 L 941 - 10 8 11833
7 Hose 3/4 R2 x 1.400 CR HG 11829
8 Cartridge LPC 7 250 bar 12019
9 Elbow 90 911 - 8i 8 11796
10 Low terminal (500) 510 - 8 16 11649
11 Clamp 1 13700
12 Hose 1 (from CETOP 5 to return sewer) Oilpress 20-25 mm 1 15143
13 Bolt W 5/16x 3/4 with washer grower 12936
14 Hose 3/4 R2 x 1.200 CR - HG 12318
15 Adapter (700) 741 - 10 - 8 11972
16 Flow valve 15230
17 Manifold pump Banjo 12271
18 Bolt W 3/8x 2 3/4 with plain washer and grower 12982
19 Clamp 1/2 13698
20 Low terminal (500) 510 - 8 8 12272
21 Hose Oilpress (20 - 13 mm) 1/2 15145
N ref. Name Code SAP N ref. Name Code SAP
CETOP 5
-
5 - 2 MAP II 2850 exp. - October 2010
1
2
3
45
9
10
11
10 1415
17
1812
11
6
7
8
13
19
16
2
1
-
MAP II 2850 exp. - October 2010 5 - 3
1 Hose Pulvepress 11/4 15173
2 Clamp 11/4 13701
3 Curved fitting 11/4 16201
4 Reduction bushing 2 - 11/4 M - F 18112
5 Ball valve 2 - 3 way 15599
6 Straight fitting 2 15501
7 Clamp 2 13703
8 Hose Oilaspir 2 15164
9 Thread with nut 2 15565
10 Elbow 45 M - F - 2 16494
11 Filter LSQ Banjo 16296
12 Filter cartridge Banjo 16307
13 Filter tap seal Banjo 16338
14 Reduction 2 - 11/2 16303
15 Curved fitting 11/4 16216
16 Nut 11/4 16049
17 Threaded nut 11/4 16149
18 Hypro pump (9303 C - HM5C) with stainless steel body 15402
19 Bolt W 3/8x 1 with plain washer and auto. nut 12975
N ref. Name Code SAP N ref. Name Code SAP
Product pump and primary filter
-
5 - 4MAP II 2850 exp. - October 2010
33 3432
10
31
30
2923
21
20
19
3
14
13
12
11
28
27
26
25
24
22
18
17
16
15
9
8
7
6
5
4
2
1
-
MAP II 2850 exp. - October 2010 5 - 5
1 Drainage tap 16279
2 Straight fitting TM 1/8- hose fitting 5/16 pump purge 20728
3 Tubed Pump (stainless steel) + ring 0150-9000S 15433
4 Polypropyleno driver nut w/code
5 Polypropyleno driver 15263
6 Viton packing 16392
7 O ring 2 - 165 16366
8 Viton mechanica gasket 15522
9 Briddle assembly 15434
10 Bolt W 3/8x 1 (stainless steel) w/code
11 Seeger ring DIN 472 35 x 1,5 12675
12 Balls bearing 16371
13 Spacer 16372
14 Seal 12639
15 Gasket spacer 16374
16 Kit repair axial bearing unit 16375
17 Seeger ring DIN 6799 15 RS 12677
18 Axle 71/2 long 16377
19 Driving pin 16378
20 Cylinder pin 16379
21 Engine body with bearing 16380
22 Bolt W 5/16x 1 12937
23 O ring 2 - 146 12173
24 Gerotor box Hypro HM5C 16382
25 Spike w/code
26 Gerotor 16383
27 Torrington bearing B1212 15339
28 Bolt allen W 5/16x 21/2 with washer grower 13195
29 Deflection adjustment screw with cunternut 16385
30 Gasket screw bypass 16386
31 Washer bypass 16376
32 Engine extreme plate with bearing 16384
33 Tank inlet adapter 16388
34 Pressure inlet adapter 16391
Set hidraulic command Hypro engine 16412
N ref. Name Code SAP N ref. Name Code SAP
Product pump (disassemble)
-
5 - 6MAP II 2850 exp. - October 2010
1
4
2
5
6
14
15
16
17
18
21
13
12
5
6
20
22
23 24 10
28
29
10 35
24
7
3
27
26
8
25
18
17
3233
34
31
30
2019
2 3
7
8
9
10
11
-
MAP II 2850 exp. - October 2010 5 - 7
1 Elbow90M/H11/4 16497
2 Straight fitting RM 11/4 - esp. 11/4 15600
3 Clamp 11/2 - 11/4 13701
4 Ball valve (3 ways) 11/4 15638
5 Clamp 1 13700
6 Hose Pulvepress 1 15170
7 Hose Pulvepress 11/4 15173
8 Straight fitting TM 11/2 - hose fitting 2 16139
9 Hose Oilaspir 2 15164
10 Clamp 2 13703
11 Straight fitting RH 2 - hose fitting 2 18052
12 Curved hose fitting 1 16506
13 Nut 11/4 16422
14 Ball valve 5 ways 2 15225
15 Reduction bushing from 11/2 to 1 18104
16 Reduction bushing from 1to 3/4 16508
17 Quick adapter RM 3/4 16230
18 Adapter tap (male) 3/4 15550
19 Peak for washer hose 17027
20 Clamp 3/4 13699
21 Quick adapter 3/4 with hose fitting 16229
22 Hose Pulvepress 3/4 15171
23 Suction filter 2 18134
24 Straight fitting RM 2 - esp. 2 15501
25 Hose Fertilex Aper 50 mm 15182
26 Ball valve 2 3 ways 15599
27 Quick adapter H - H 11/2 15644
28 Reducer bushing de 2 a 11/4 18112
29 Elbow 90 RM 11/4 - esp. 11/4 16266
30 Tap for male adapter 2 15657
31 Adapter RM 2 16228
32 Reducer bushing 2 a 3/4 15499
33 Tee H 2 15502
34 Thread with nut 2 15565
35 Load pump Banjo 15224
N ref. Name Code SAP N ref. Name Code SAP
Centrifugal load pump
-
5 - 8MAP II 2850 exp. - October 2010
15
14
8-8
13
12
11
8 - 7
16
17
18
19
20
2324
2122
8 - 5
8 - 6
10
11
8 - 4
9
8 - 3
8 - 2
8 -1
7
654321
-
MAP II 2850 exp. - October 2010 5 - 9
1 Hose 3/4 R2 x 1.200 CR - HG 12318
2 Bolt W 3/8x 11/2 with washer grower 12977
3 Hydraulic engine for Banjo pump 15229
4 Low terminal (500) 510 - 12 16 11654
5 Clamp 1 13700
6 Hose Oilpress (20 - 25 mm) 1 15143
7 Hydraulic box pedestal w/code
8 Kit de reparacin bomba Banjo 15267
8 - 1 Segment O ring belongs to set 15267
8 - 2 O ring screw head belongs to set 15267
8 - 3 Stainless steel washer belongs to set 15267
8 - 4 Polypropylene turbine for 5 fin pump (belongs to set 15267) 15268
8 - 5 Jet engine gasket bolt belongs to set 15267
8 - 6 Stainless steel jet engine bolt belongs to set. 15267
8 - 7 O pump body ring belongs to set 15267
8 - 8 Retention valve (belongs to set 15267) 155065
9 Stainless steel bearer screw w/code
10 Stainless steel higher screw for volute w/code
11 Priming/draining tap w/code
12 Stainless steel screw w/code
13 Polypropylene pump body set w/code
14 Satinless steel screw for polypropylene pump volute w/code
15 Polypropylene pump volute 16621
16 Cotter pin of turbine w/code
17 Seals kit Banjo pump 15266
18 Polypropylene rear pump clamp w/code
19 Stainless steel nut with washer grower w/code
20 Bolt W 5/16x 13/4 G5 with plain washer and locknut 12940
21 Bearing 12524
22 Adapter axle 16593
23 Bevelled washer 3/8 short range 13589
24 Adapter (700) 748 - 10 - 10 11680
N ref. Name Code SAP N ref. Name Code SAP
Centrifugal load pump (disassemble)
-
5 - 10MAP II 2850 exp. - October 2010
1
34
56
7
2
8
9
39
38
37
41
42
43
40
12 13
14
18
19
20
10
11
2728
32
33
3426
31
15
16
17
19
20
24
2523
18
2221
3536
30
29
-
MAP II 2850 exp. - October 2010 5 - 11
1 Curved fitting 11/4 16216
2 Nut 11/4 pertenece a cto: 16216
3 Counter nut 11/4 16214
4 Thread nut 11/4 16149
5 Straight fitting TF 11/4 - hose fitting 11/4 16301
6 Clamp 11/4 - 11/2 13701
7 Plastic pipe de 32 mm 15188
8 O Ring 2.62 mm I 26.6 for fitting 11/4 16031
9 Plain gasket 11/4 16215
10 Load pump electrical stop 17489
11 Curved fitting 3/4with lock ring 16172
12 Plain gasket 3/4 15696
13 Counternut 3/4 w/code
14 Threaded nut 1/2 BSP 18082
15 Elbow F/F 90 1/2 BSP 18109
16 Reducing threaded nut 1/2- 1 18132
17 Straight fitting TF 1 BSP - hose fitting 1 18099
18 O ring viton G 10071 16111
19 Curved fitting 2 for nut 16045
20 Threaded nut TF 2 16051
21 Counternut TF 2 16053
22 Plain gasket 2 16035
23 Threaded nut 2 15565
24 Clamp 2 13703
25 Hose Fertilex Aper 50 mm 15182
26 Elbow TM 1/8 - hose fitting 1/4 20729
27 Product tank 14250
28 Tank fix nut w/code
29 Rebuttable tap gasket 16190
30 Rebuttable tap 180 with block 16081
31 Floating ball vent valve 16174
32 Plain gasket 1/2 15656
33 Curved fitting 1/2 with nut 16124
34 Hose (transparent) 7/8 (P001416) (per meter) 27396
35 Clamp 2 13703
36 Hose 2 54046
37 Fitting empty tank 11/2 16120
38 Counternut 11/2 16052
39 Fitting curved 11/2 16044
40 Plain gasket 11/2 16034
41 Nut 11/2 16050
42 Clamp 11/4 - 11/2 13701
43 Hose 11/2 Oilaspir 15163
N ref. Name Code SAP N ref. Name Code SAP
Main tank (inlets)
-
5 - 12MAP II 2850 exp. - October 2010
1
6
4 2-1
72-2
2-2
5
6
5
1
8
6
9
21
3 4
10
11
2021
23
24
26
28
22
25
27
13
14
1216
17
18
1516
1319
15
5
-
MAP II 2850 exp. - October 2010 5 - 13
1 Tank connection 1/2 BSP 18094
2 Plastic pipe 1/2 (per meter) 16810
3 Elbow M/F 1/2 BSP 18064
4 Elbow F/F 1/2 BSP 18062
5 Threaded screw 1/2 BSP 18082
6 Tap TF 1/2 BSP 18088
7 Cross TF 1/2 BSP 18100
8 Tee RH 1/2 BSP 18063
9 Jet for tank cleaning up 16211
10 Straight fitting TM 2 - hose fitting 2 16208
11 Curve M/F 90 2 BSP 18077
12 3 way spherical valve 2 15599
13 Female tap 2 BSP with gasket 16121
14 Elbow 90 TM 2 - TM 2 16119
15 Plain gasket 2 16035
16 Counter nut 2 16053
17 Antieddy water inlet 16066
18 Threaded screw 2 15565
19 Load pump electrical stop 17489
20 Hydraulic agitator 16403
21 Coupling 1/2 female 18111
22 Straight Fitting 1/2 - hose fitting 3/4 16134
23 Clamp 3/4 13699
24 Counter nut 11/4 16214
25 Nut 1 1/4 16049
26 Hose Pulvepress 3/4 15171
27 Female T 3/4 18063
28 Straight fitting 3/4 - hose fitting 3/4 18044
N ref. Name Code SAP N ref. Name Code SAP
Main tank (outlets)
-
5 - 14MAP II 2850 exp. - October 2010
3
4
13
65
7
8
6
12
9
1
14
15
13
13
2 5
10
11
6
5
10
-
MAP II 2850 exp. - October 2010 5 - 15
1 PLA fuel tap 14003
2 Throat fuel tank 20536
3 Screw parker N10 x 25 13339
4 Floating ball vent valve 16174
5 Clamp 11/4 13701
6 Straight fitting TM 11/4 BSP - hose fitting 11/4 15600
7 3 way spherical valve 11/4 15638
8 Elbow 90 M/F 11/4 BSP 15693
9 Threaded nut 11/4 16149
10 Hose Pulvepress 11/4 15173
11 Retention valve 16397
12 Clean water tank with lamp cover 14083
13 Bolt 1/4 14 x 25 HWH N 3 KWIK seal con arandela de goma 12927
14 Front lamp (high) 17714
15 Front lamp (high/low) 17694
16 Bolt w/code
N ref. Name Code SAP N ref. Name Code SAP
Front auxiliary tank
-
5 - 16MAP II 2850 exp. - October 2010
1
3
5
6
7
11
4
12
2
2
1
1314
15
16 18
4 4
1
2
3
22
23
24
2120
17
1
2
4
193
8
9
10
24
-
MAP II 2850 exp. - October 2010 5 - 17
1 Hose Pulvepress 11/4 15173
2 Clamp 11/4 13701
3 Straight hose fitting 11/4 16027
4 Nut 11/4 16049
5 Sprayer flowmeter 15377
6 Filter autocleaning 11/4 16648
7 Filter element 11/4 M 80 16077
8 O ring 16180
9 Filter cup belongs to set 16648
10 Filter nut 16182
11 Threaded nut 11/4 16149
12 Curved hose fitting 45 15329
13 Curved fittting 11/2 - 11/4 16199
14 Nut 11/2 16050
15 Coupled flange 15316
16 Flange H ball valve 15315
17 Lock 15334
18 Stop valve set and regulation 152722
19 Thread with nut 11/4 15312
20 Hose Pulvepress 3/4 15173
21 Clamp 3/4 13699
22 Straight hose fitting 3/4 - 11/4 16569
23 T male thread 11/4 16568
24 Mixing cone Full 16534
N ref. Name Code SAP N ref. Name Code SAP
Stop valve set and regulation. Mixing cone
-
5 - 18MAP II 2850 exp. - October 2010
1
31
30
29
32
29
5
33
3
6
5
4
2
525
1924
23
6
21
5
22
2019
49
46
47
14
4544
43
426
48
11 12 13 14 1615 17 6 5 6
18
10
8
9
6
7
34
28
28
29
31
35
3635
5
27
26
4241
40
39
38
37
-
MAP II 2850 exp. - October 2010 5 - 19
1 Hinge bolt 40 x 800 19334
2 Filter holder 160982
3 Bolt W 5/16x 11/4 with locknut, plain washer
and grower 12938
4 Interior bronze bushing 19374
5 Cotter pin 4 x 40 13648
6 Straight nipple 1/4 BSP 13640
7 Small wing (left) 153555
Small wing (right) 153557
8 Hinge bolt 22 x 270 19697
9 Spring PLA 14344
10 Double nut W 3/8 with plain washer 13040
11 Big spring (fuse wing) 14343
12 Smaller wing (left) 153556
Smaller wing (right) 153558
13 Protect nozzle (reflective plate) 20393
14 Locknut W 1/4 with plain washer 13085
15 Short clamp for pipe 40 x 20 19416
16 Nut 3/4 NF especial 13058
17 Scissors folding small wing 150043
18 Long bushing interior (bronze) 19373
19 Nut W 5/16 with plain washer 13039
20 Cylinder 2 1/2 x 408 mm 11324
21 Rubber damper 50 mm 15014
22 Clamp U 19740
23 Bolt W 3/8x 2 1/2 12981
N ref. Name Code SAP
Wings and smaller wings (28 m)
48 Bolt 22 x 190 support cylinder 19370
49 Bolt 22 x 250 19559
24 Fuse (small/smaller wing) 150226
25 Rubber damper 75 mm 52011
26 Bolt 22 x 210 scissors 19558
27 Bolt M8 x 1,25 x 15 G8 13234
28 Bronze bushing 19345
29 Nipple 1/8 BSP 13642
30 Elastic spine 6 x 50 13625
31 Bronze bushing 20657
32 Hinge wing (left) 19016
Hinge wing (right) 18878
33 Cotter pin 5 x 90 13657
34 Castle nut 11/2 NF G5 13095
35 Bolt 22 x 120 for cylinder 19679
36 Cylinder 45 2 1/2 x 220 11320
37 Hinge bolt (top) 19364
38 Wing (left) 151714
Wing (right) 151256
39 Bolt W 5/16 x 11/4 12938
40 Holder plate 154481
41 Holder plate U 20455
42 Nut 5/16 with plain washer and grower 13039
43 Spring 20517
44 Bolt W 1/4x 3/4 with washer grower 12917
45 Support 154389
46 Support top 19961
47 Clamp for pipe 40 x 30 19414
N ref. Name Code SAP N ref. Name Code SAP
-
MAP II 2850 exp. - October 2010 5 - 20
1
9
8
7
2
4
5
6
3Detail 6
Detail 28
6
5
4
1
2
3
Detail 17
7
2
1
1
7
9
8
28
29
3
4
6
22
11
10
1
14
16
2019
18
21
2624
19 27
2325
1918
61
5
4
3
2
10
12
13
51
2
3
4
2
17
15
30
2
4
8
10
20
6
75100
125
1502
5
50
0
-
MAP II 2850 exp. - October 2010 5 - 21
1 Hose Pulvepress 1 15172
2 Clamp 1 13700
3 Straight fitting 3/4 TM - hose fitting 1 15432
4 Elbow F - F 3/4 BSP 18159
5 Stainless steel pipe 3/4 (see note*) 17047
6 5 way nozzle holder set 16706
6 - 1 Nut M 6 belongs to set 16706
6 - 2 Screw head philips M 6 x 1 belongs to set 16706
6 - 3 O ring 2,62 x 9,13 x 14,37 (belongs to set) 16189
6 - 4 5 way nozzle holder belongs to set 16706
6 - 5 Gasket for tap 1/4 turn (belongs to set) 16091
6 - 6 Nozzle HCX 15883
Nozzle 80015 15951
Nozzle 8002 15952
Nozzle 8003 15953
Nozzle 8004 15954
6 - 7 Nozzle holder tap green empty cone 16092
Tip holder tap yellow 16105
Tip holder tap red 16106
Tip holder tap blue 16107
Tip holder tap black 16090
6 - 8 Nondripping tap 0,5 BAR red (b/t set 16706) 16128
6 - 9 High press.nondripping memb. (b/t set 16706) 16153
7 Bed for 3/4 pipe 15421
8 Lock boom sensor 22042
9 Lock boom sensor (support) 19107
N ref. Name Code SAP
Spraying line (boom)
26 Curved fitting 45 11/4 - hose fitting 11/4 15329
27 Hose 11/4 Oilaspir 15162
28 Box for cutting off sections (5 sections) 28713
Box for cutting off sections (7 sections) 28714
Box for cutting off sections (9 sections) 28715
Box for cutting off sections (11 sections) 28716
28 - 1 Regulator filter (Regufiltro) 29261
28 - 2 Pneumatic panel (5 sections) 28713
Pneumatic panel (7 sections) 28714
Pneumatic panel (9 sections) 28715
Pneumatic panel (11 sections) 28716
28 - 3 Extrem.for pneumatic panel (5 y 7 sec.) 29023
Extrem.for pneumatic panel (9 y 11 sec.) 29024
28 - 4 Pneumatic valve for Parker panel 29026
28 - 5 Silencer for Parker panel 29260
28 - 6 Pneumatic valve for Parker panel (coil) 29025
Seals between valves 29269
Elongate seals (3 groves) 29270
Seals for electric connector 29271
29 ECU control of sprayer 17784
30 Pressure sensor 17789
* Order indicating the total length of pipe and distance
between holes.
10 Hose Festo 6 x 1 16562
11 Quick coupling M 1/8 for pipe 6 28972
12 Screw 3/4 with nut 16399
13 T TF 3/4 BSP 64129
14 Pneumatic section valve 28709
15 T F-F 3/4 15325
16 Elbow TM 3/4 Esp. 1 18045
17 Line filter 1 with racors and support (boom) 151938
Line filter 1 (support) 19966
Line filter 1 (serie 323) (boom) 16221
17-1 Nut 1 16048
17-2 Curve fitting 1 16043
17-3 Line filter 1 (body) TM 1 belongs to set 16221
17-4 Line filter 1 (vessel) belongs to set 16221
17-5 Cartridge 1 M 80 (grey-mesh 80) 16222
Cartridge 1 M 100 (red-mesh 100) 16086
17-6 O ring 3,53 x 50,8 x 57,86 Epdm 16074
17-7 Bolt M8 x 1.25 with washer grower 13234
18 Hose Pulvepres 11/4 15173
19 Clamp 11/4 13701
20 Fitting TM 11/4 - Hose fitting 11/4 15600
21 T F-F 11/4 28525
22 Straight fitting 11/4 TM - hose fitting 1 16202
23 T M-M 11/4 16568
24 Nut 11/4 16049
25 Straight fitting - hose fitting 11/4 16027
N ref. Name Code SAP N ref. Name Code SAP
-
5 - 22MAP II 2850 exp. - October 2010
21
Sprayer lines support
20
12
3
5
5
6
7
4
18
12
10
9
11
14
1915
17
16
16
16
16
17
3
13
8
-
MAP II 2850 exp. - October 2010 5 - 23
1 Female tap 3/4 54560
2 Screw 3/4 with nut 16399
3 Hole Pulvepress 1 54056
4 Clamp 1 29022
5 T TF 3/4 BSP 64129
6 Nozzle holder 5 ways (for 3/4 pipe) 155189
7 Filter line support 160982
8 Filter line (big) 28831
9 Screw 3/4 with nut 16399
10 Quick coupling L thread M 1/8 (for pipe 6) 28972
11 Hose Festo 6 x 1 16562
12 Pneumatic section valve 28709
13 Curved fitting TF 3/4 - hose fitting 1 15653
14 Straight fitting TM 11/4 hose fitting 1 16202
15 T F-F 11/4 28525
16 Hose Pulvepres 11/4 15173
17 Clamp 11/4 13701
18 Fitting TM 11/4 - hose fitting 11/4 15600
19 Stainless steel pipe 3/4 (see note*) 17047
20 Long support sprayer line 3/4 402807
21 Support sprayer line. 40 x 30 3/4 402805
* Order indicating the total length of pipe and distance between holes.
N ref. Name Code SAP N ref. Name Code SAP
Spraying line (wing)
-
5 - 24MAP II 2850 exp. - October 2010
3
4
5
68
1
2
7
Detail 15
10
14
8
7
6
5
13
32
1
4
12
12
13
19
14
14
15
1
911
11
171812
16
-
MAP II 2850 exp. - October 2010 5 - 25
1 Female tap 3/4 15419
2 Thread 3/4 with nut 16399
3 Quick coupling L thread M 1/8 (for pipe 6) 28972
4 Hose Festo 6 x 1 16562
5 T TF 3/4 BSP 64129
6 Pneumatic section valve 28709
7 Curved fitting TF 3/4 - hose fitting 1 15653
8 Clamp 1 13700
9 Hose Pulvepress 1 15172
10 Straight fitting TM 11/4 - hose fitting 1 16202
11 Hose Pulvepres 11/4 15173
12 Clamp 11/4 13701
13 Fitting TM 11/4 - hose fitting 11/4 15600
14 Stainless steel pipe 3/4 (see note*) 17047
15 Nozzle holder (simple) (for 3/4 pipe) 16536
15 - 1 Screw parker belongs to set 16536
15 - 2 O Ring 2,62 x 9,13 x 14,37 Epdm (belongs to set 16536) 16189
15 - 3 Simple nozzle holder (belongs to set 16536) 16536
15 - 4 Sealing for tap (belongs to set 16536) 16091
15 - 5 Nozzle tip HC 15883
Nozzle tip 80015 15951
Nozzle tip 8002 15952
Nozzle tip 8003 15953
Nozzle tip 8004 15954
15 - 6 Quick shank tap for green empty cone 16092
Quick-fitting caps (yellow) 16105
Quick-fitting caps (red) 16106
Quick-fitting caps (blue) 16107
Quick-fitting caps (black) 16090
15 - 7 High pressure nondripping membrane 16153
15 - 8 Nondripping capsule 0,5 bar (red) 16128
16 Line sprayer support 40 x 20 3/4 402805
17 Hose Pulvepres 3/4 15173
18 Clamp 3/4 13699
18 Straight fitting TM 11/4 - hose fitting 3/4 28706
* Order indicating the total length of pipe and distance between holes.V
N ref. Name Code SAP N ref. Name Code SAP
Spraying line (small wing and smaller wing)