1. 1. Prototyping of caterpillar S1210099 Tatsuya Hanyu
2. 2. Caterpillar using LEGO blocks We want to create this product because we search robot object that uses Lego by using Internet. Then that robot car appeared. We thought that object is interesting so we select this product. We first time to see the product that have many wheels.
3. 3. 1stProduct Prototype using Tinkercad To create prototype with Tinkercad. The original photo was complex so we had to do deep observation. We would create caterpillar so we should to understand with assembly of caterpillarand system of caterpillar.
4. 4. 2ndProduct Prototype using 123D Design. "123D Design" the same way as Tinckercad, can be used to create a prototype using 3D graphics. Tinckercad is cloud-based. So, it can be used only in the browser. However, "123D Design" can be downloaded from the internet. Therefore, it can be used in local area.
5. 5. 3rdProduct Prototype using 123D Make. This software take in 123D Design model. And setting the option for create new model. Set to 10 the division number.Next, set the size of model. Finally, To show the developed parts. You can create this object in real life based on this developed parts.
6. 6. 1st Materials
7. 7. 1st Constructions
8. 8. 1st Functions
9. 9. 1st Appearance
10. 10. 2nd Social Environmental Factors
11. 11. 2nd Materials
12. 12. 2nd Constructions
13. 13. 2nd Functions
14. 14. 2nd Appearance
15. 15. 2nd Social Environmental Factors
16. 16. 3rd Materials
17. 17. 3rd Constructions
18. 18. 3rd Functions
19. 19. 3rd Appearance
20. 20. 3rd Social Environmental Factors
21. 21. product specifications list Caterpillar 12 parts Motor 8 parts Gear 4 parts Plate for control unit 1 parts Control unit 1 parts LEGO brock for caterpillar to connect caterpillar 6 parts
22. 22. Process Graphics 1: Prototyping of caterpillar In this step, create wheels. This is a base of caterpillar.
23. 23. Process Graphics 2: Prototyping of caterpillar In this step, create motors and gears.
24. 24. Process Graphics 3: Prototyping of caterpillar In this step, create control unit. And this unit control all of wheel.
25. 25. Process Graphics 4: Prototyping of caterpillar In this final step, put sticks by the wheel. This stick stable the caterpillar.
26. 26. Identify three important problems you faced during the construction of the product prototypes using 123D Design and Make software. First problem is that download version "123D Design" force-quit frequently. If you use 123D Design in low specs PC, it will force-quit frequently. Second problem is that We can not be edited in their own design that is present from the beginning to the "123D Design". When we were applying the design was made with 123D Design in 123D Maker, it may not be reliably reflect.
27. 27. planning All of us search the original photo in internet. After that, we discussed about what photo is best analysis All of us discussed about the decided photo. For example, this parts are made of wheel. design A team member create 3D design with Tinkercad. And one other team member create 3D design with 123D Design.
28. 28. CONCLUSION I construct this product with Tinkercad application. I make this by to see those of 3D modeling.