Designed by Jinny Beyer

Featuring the Jinny Beyer Palette883/4" x 883/4"

Instructions by Margrit Hall

www.rjrfabrics.com

* See alsoCorrection Page

Fabric Cutting Directions

Sew a 101/2" triangle of Fabric 14 to each Unit 1 and each Unit 1R to make a complete Dominion Steps Block. Press toward the direction of the arrows.

Sew a Unit 8 to opposite sides of a Unit 6, and then sew a63/8" triangle of Fabric 15 to the remaining two sides. Press seams open.

Unit 8

15

15

Block 1 – Empire Star

Make 8

Block 2 & 2R (Reverse) - Dominion Steps (11" Finished) Make 4 & 4R

Fabric # Description Cutting

13� Peony Feather� Cut 1 - 17/8" wide strip, Cut into 8 - 17/8" squares�

12� Carmine Rose� Cut 1- 17/8" wide strip, Cut into 8 - 17/8" x 31/4" rectangles

11� Cherry Fern� Cut 1- 17/8" wide strip, Cut into 8 - 17/8" x 45/8" rectangles

10� Ruby Feather� Cut 2 - 17/8" wide strips, Cut into 8 - 17/8" x 6" rectangles

9� Turkey Red Cut 2 - 17/8" wide strips,

Pinecone Cut into 8 - 17/8" x 73/8" rectangles�

8� Garnet Rose� Cut 2 - 17/8" wide strips, Cut into 8 - 17/8" x 83/4" rectangles

7� Eggplant � Cut 3 - 17/8" wide strips, Primrose Cut into 8 - 17/8" x 101/8" rectangles

5� Black Eyelash� Cut 3 - 17/8" wide strips, Cut into 64 - 17/8" squares

14� Alabaster � Cut 2 - 21/4" wide strips, Marble Cut into 28 - 21/4" squares Cut once on diagonal to make 56 triangles Cut 1 101/2" wide strip, Cut into 4 - 101/2" squares Cut once on diagonal to make 8 triangles��

Block 2 & 2R ConstructionSew a 17/8" square of Fabric 5 to the end of each of Fabrics 7, 8, 9, 10, 11, 12, & 13. Layout as illustrated. Sew a 21/4" triangle of Fabric 14 to the end of strip sets 2 - 8 and 2R - 8R. Fabric 14 triangles are mirror images. Be sure to sew on correctly. Press seams open.

Row� 1� 2� 3� 4� 5� 6� 7 �8� 8R� 7R� 6R �5R� 4R� 3R� 2R� 1R

Fabric� 7� 8 �9� 10� 11� 12� 13 �5� 5� 13� 12� 11 �10� 9� 8� 7�

5

14 14

14 14

14 14

14 14

14 14

14 14

14 14 5

5 5

5 5

5 5

5 5

5 5

5 5

14

Unit 1

Make 4

Unit 1R

Make 4

14

Block 2

Make 4

Block 2R

Make 4

Sew strip sets 1 - 8 together, and strip sets 1R - 8R together. Make four each of strip sets 1- 8 and four each of strip sets 1R - 8R to make four Unit 1's and four Unit 1R's. Press seams open.

3

Cutting Guide for Rotary CuttingMake a paper template with the enclosed cutting guide template. Carefully place one edge of the template along the edge of the ruler, and tape in place. Using the template as a guide, cut the strip the same width as the template.

113/16" Guide

Template ACut 8 & 8Rof Fabric 2

Template BCut 8 & 8Rof Fabric 3

Template CCut 8 & 8Rof Fabric 4

5

Fabric Cutting Directions

Block 4 - September Sun (22" Finished)

Fabric # Description Cutting

6 Midnight Marble Cut 1 - 121/4" wide strip, Cut into 1 - 121/4" square Cut across both diagonals to make 4 triangles Cut the remainder of the strip down to 6", Cut 4 - 6" squares 5 Black Eyelash Cut 3 - 23/8" wide strips Cut each strip in half to make 6 half-strips as illustrated.

9 Turkey Red Cut 2 - 23/8" wide strips, Pinecone Cut into 4 half-strips as illustrated for Fabric 5� 10 Ruby Feather Cut 3 - 23/8" wide strips, cut into 6 half-strips as illustrated for Fabric 5 11 Cherry Fern Cut 1 - 23/8" wide strips, cut into 2 half-strips as illustrated for Fabric 5��

21"23/8"

21"

Block 4 ConstructionUsing the 23/8" x 21" half-strips make 6 strip sets one each of 1, 1R, 2, 2R, 3, & 3R. Sew strips together off-setting the strips by approximately 21/2" as illustrated below. Press seams toward the direction of the arrows.

Cutting 45° Angle DiamondsLine up the 45° angle on the ruler with the tip edge of set 1. Trim the edge as shown in Figure 1. After trimming the edge cut 4 - 113/16" segments as shown in Figure 2. Use a ruler grided in 1/16" or use the cutting guide on page 5. Repeat for set 2 and 3. Trim the edge of set 1R as shown in Figure 3. Continue cutting as shown in Figure 4. Cut 4 - 113/16" segments. Repeat for set 2R and 3R.

Sew one each of sets 1, 2, and 3 together to make star points. Make 4. Press seams open. Sew one each of sets 1R, 2R, and 3R together to make reverse star points. Make 4. Press seams open (See Hint for Sewing Set Together).

Hint for Sewing Set TogetherSeams are not going in the same direction, they cross at the 1/4" seam allowance. Pin each intersection. The pin should not be placed where corresponding seams meet. Sew carefully.

Set 1

Color 5

Color 9

Color 10

Set 1R

Color 10

Color 5

Color 11Set 1 Set 1R

Color 9

Color 10

Color 5Set 2 Set 2R

45˚

45˚ 45˚

Cut

Figure 1

Figure 3 Figure 4

Figure 2

Cut

45˚

5

9

10

5

9

10

9

10

5

9

10

5

10

5

11

10

5

11

Set 1

Set 2

Set 3

Set 1R

Set 2R

Set 3R

Unit 1Make 4

Unit 1RMake 4

Units 1, 2, & 3

Units 1R, 2R, & 3R

6

21"

Sew two Unit 3's together to make a completed block. Pin to make sure the center seams align perfectly. Press seams toward the direction of the arrows.

Unit 2Make 4

Sew star points together as illustrated. Do not stitch through seam allowances where indicated by dots. Always backstitch at dots. Sew in sequence as numbered and indicatedby the arrows.

5 5

11 11

6" squareFabric 6

121/4" TriangleFabric 6

Unit 1RUnit 1

10

5

99

10

510

5

9

10

9

10

12

4

3

5

10

Press toward arrows.Press seam 3 connectingUnit 1 and Unit 1R open.

Sew two Unit 2's together to make Unit 3. Pin to make sure the center seams align perfectly. Press toward arrows.

Unit 3Make 2

Press Open

Press CenterSeams Open

September SunCompleted Block

Center Seams

2

1

2

3

Border Cutting and ConstructionIf your quilt measurements are different than those listed cutborder pieces to fit your measurements.

1st BorderFabric Cutting Directions

Fabric # Description Cutting

1 Nile Pansy Cut 1 - 23/8" wide strip, Cut into 4 - 23/8" squares 3 Copen Tapestry Cut 1 - 23/8" wide strip, Cut into 8 - 23/8" squares

6 Midnight Marble Cut 1 - 23/8" wide strip, Cut into 4 - 23/8" squares Cut 8 - 41/8" wide strips��

To make 1st border corner units, sew a 23/8" square of Fabric 6 to a 23/8" square of Fabric 3. Sew a 23/8" square of Fabric 3 to a 23/8" square of Fabric 1. Sew a Fabric 6/3 to a Fabric 3/1 to form a corner unit. Press in the direction of the arrows.

Corner UnitMake 4

RightSide

ofQuilt

LeftSide

ofQuilt

41/8"

42"42"

6

3 1

3

3

6

3

6

Cut all 4 of the long strips down to measure 661/2" long. Sew a strip to the top and bottom of the quilt. Sew a corner unit to the top and bottom of the remaining 2 strips, making sure the color placement is correct. Sew to sides of quilt.

2nd Border (Fabric 10)Cut 8 - 17/8" wide strips. Sew 2 - 17/8" x 42" strips together to make one long strip. Make a total of 4 long strips. Cut 2 of the long strips down to measure 17/8" x 733/4" long. Sew to top and bottom of quilt. Cut remaining two strips down to measure 17/8" x 761/2" and sew to the sides of the quilt.

6

1

3

3

6

3 1

3

3

1

3

1

3rd Border (Fabric 6)Cut 9 - 51/2" wide strips.Cut one of the 51/2" x 42" strips in half to make 2 - 21" half strips. Sew 2 - 51/2" x 42" strips together to make one long strip. Make 2 total. Cut down to measure 51/2" x 761/2". Sew to the top and bottom of the quilt. Cut one of the 51/2" x 42" strips in half to make 2 - 51/2" x 21" strips. Sew 2 - 51/2" x 42" and 1 - 51/2" x 21" strips together to make one long strip. Cut down to 861/2" and sew to the side of the quilt.

Sew 2 - 41/8" x 42" strips together to make one long strip. Make 4.

21"

51/2"

21"

42" 42"

7

43/8 yards (includes border)

15/8 yards

Fabric 1 3365-008 (P#128)

Fabric 2 7132-029 (P#126)

Fabric 3 3366-005 (P#86)

Fabric 4 8737-008 (P#121)

Fabric 5 9410-014 (P#48)

Fabric 6 3368-003 (P#87)

Fabric 7 4732-004 (P#98)

Fabric 8 3364-003 (P#33)

Fabric 9 3365-005 (P#101)

Fabric 10 8737-005 (P#82)

Fabric 11 0691-006 (P#31)

Fabric 12 8737-011 (P#145)

Fabric 13 4795-026 (P#146)

Fabric 14 3367-001 (P#57)

Fabric 15 7132-027 (P#91)

Suggested Backing: Fabric 10

3/8 yard

1/4 yard

3/4 yard

3/8 yard

7/8 yard

1/4 yard

1/4 yard

3/8 yard

3/8 yard

1/8 yard

1/8 yard

7/8 yard

8¾ yards

2½ yards (includes border & binding)

4th Border (Fabric 10)Cut 10 - 17/8" wide strips. Cut 2 of the strips in half to make4 - 17/8" x 21" half-strips. Sew 2 - 17/8" x 42" strips, and1 - 17/8" x 21" strips together to make one long strip. Make 4total. Cut 2 of the long strips down to measure 861/2" andsew to the top and bottom. Cut the remaining 2 strips downto measure 891/4" and sew to the sides of the quilt. Seediagram below.

Binding(Fabric 10)Cut 9 - 21/2"wide strips

Block Layout Diagram

Fabric Requirements

© 2002 RJR Fashion Fabricsr05.2019

8

1 3 2 2R 3R 1

3R 1 3 3R 1 3

2R 3R

4

3 2

2 3 3R 2R

3 1 3R 3 1 3R

1 3R 2R 2 3 1

September Sun - Pattern Notes

Correction - Page 2/Block 1 Fabric Cutting DirectionsIn addition to the cuts noted, cut three strips measuring 31/8", then cut those strips into 32 squares measuring 31/8".

Kit Note - Page 7/Border Fabric Cutting & ConstructionIf you have purchased a kit from Jinny Beyer Studio, the fabrics used in the borders are furnished in lengthwise yardage thatallows you to assemble the borders without piecing the strips from WOF cuts. Please adjust the directions to the followingdimensions:

1st Border (Fabric 6). Cut four strips 4¼" x 66½".2nd Border (Fabric 10). Cut two strips 17/8" x 74¾", and two strips 17/8" x 76½".3rd Border (Fabric 6). Cut two strips 5½" x 76½" and two strips 5½" x 86½".4th Border (Fabric 10). Cut two strips 17/8" x 86½", and two strips 17/8" x 89¼".