iTransmitiTransmitiTransmitiTransmit Wireless Wireless Wireless Wireless MultiMultiMultiMulti----Function Function Function Function RRRRemote Terminal Unit emote Terminal Unit emote Terminal Unit emote Terminal Unit

Remote Remote Remote Remote

Monitoring Monitoring Monitoring Monitoring

Telemetry Telemetry Telemetry Telemetry

Oil& GasOil& GasOil& GasOil& Gas

UtilityUtilityUtilityUtility

Waste Water Waste Water Waste Water Waste Water

& Water& Water& Water& Water

Rev. 1 (01/25/10)

For more information on our products and services or to place an order, please check out our

website at www.vMonitor.com or contact us at 713-467-3900 to speak to one of our engineers. Let

us help you make the virtual oilfield a reality.

Some of the Benefits and FeaturesSome of the Benefits and FeaturesSome of the Benefits and FeaturesSome of the Benefits and Features

� Remote Configuration

� Selectable Wake-up interval from 0.008 second

to 18 hours

� Report by exception

� Battery Level Indicator

� Built-in 128 bit encryption

� Selectable data reporting (Raw, Engineering

Units, SQRT, Linear and SQRT accumulation)

� Network Time Synchronization

� Data History

� Min/Max and Percent Change Alarms

� Diagnostic data (response time, message count

and signal strength)

General General General General SpecificationsSpecificationsSpecificationsSpecifications

iTransnmitiTransnmitiTransnmitiTransnmit – is an intelligent wireless remote terminal

unit that provides a reliable and cost effective means to remotely monitor your applications in the oil and gas fields. Combined with a Gateway, the iTransmit, installed at the remote site, can be a stand-alone RTU or part of an integrated network to acquire real-time data for analysis and detect alarms. vMBus RTUs have been successfully implemented for wellhead, ESP, downhole gauges, and gaslift valve monitoring. vMbus RTUs are easily customizable for a variety of other applications and third party equipment.

Inputs

3 ADC channels -16 bit resolution ( 0-5 VDC or 0-20 mA)

3 Analog input channels that can support 0-5 VDC or 4-20mA

1 Analog output channel that can support 1-5 VDC or 4-20mA

2 Opto-Isolated Digital Input channels (3-24 V AC or DC)

2 Digital outputs where one can be used as a Solid State Relay

1 Tank monitor channel

Independent A/D channel used for battery voltage level

Independent A/D channel used for temperature

Processor and Memory

8051 Micro-Controller running at 12.58MHz with 64KB Flash Memory

Radio

Plug-in radio modem operating at a frequency of 900 MHz or 2.4 GHz

Serial Ports

1 RS232 Serial Interface port-baud rate up to 115,200 bps

Relays

1 Solid State Relay that can support up to 350 mA continuous current

Power

Input Range 6 to 12.0 VDC, source from either battery or DC source

Low Power Operating Mode

Terminal blocks for providing regulated 10 V & 15 V to power sensors

Operation Modes

Continuous

Sleep

Timer/Clock

On-board

Operating Temperature

-40˚C to +85˚C (-40 ˚F to + 185˚F) with option of -40˚C to +125˚C

Humidity Range 5-90% non-condensing

Dimensions

8.6 cm x 6.7 cm (3.4” x 2.6”)

Support

vMBus Communications Protocol

MODBUS Protocol Support

Firmware

Data Totalizer , Pulse Counter/Accumulator, Square Root Extraction, Engineering Units, Conversion/Scaling

iTransmitiTransmitiTransmitiTransmit Wireless Wireless Wireless Wireless MultiMultiMultiMulti----Function Function Function Function RRRRemote Terminal Unit emote Terminal Unit emote Terminal Unit emote Terminal Unit

Remote Remote Remote Remote

Monitoring Monitoring Monitoring Monitoring

Telemetry Telemetry Telemetry Telemetry

Oil& GasOil& GasOil& GasOil& Gas

UtilityUtilityUtilityUtility

Waste Water Waste Water Waste Water Waste Water

& Water& Water& Water& Water

Rev. 1 (01/25/10)

For more information on our products and services or to place an order, please check out our

website at www.vMonitor.com or contact us at 713-467-3900 to speak to one of our engineers. Let

us help you make the virtual oilfield a reality.

Radio Specifications for Radio Specifications for Radio Specifications for Radio Specifications for iTransmitiTransmitiTransmitiTransmit (Range and Transmit Power may vary due to various factors, such as type and elevation of antenna, line of sight, the environment, and power output. A vMonitor Engineer can assist you with determining range, frequency, transmit power and other factors to develop a solution to meet your requirements.

Compatible RadiosCompatible RadiosCompatible RadiosCompatible Radios RangeRangeRangeRange Transmit PowerTransmit PowerTransmit PowerTransmit Power

900 MHz and 2.4 GHz ZigBee Radio Up to 32 km (20 miles) 5 mW- 1000 mW variable

Typical vMonitor Network SetupTypical vMonitor Network SetupTypical vMonitor Network SetupTypical vMonitor Network Setup

Other Other Other Other Wireless Wireless Wireless Wireless Products from the Products from the Products from the Products from the

vMBus FamilyvMBus FamilyvMBus FamilyvMBus Family

vMBusX-G

(Gateway)

vMBusX-C RTU Rev. 5.1 (5AD, 2AO, 2DI, 2DO, RTD, BAT) vMBusX-MIO RTU Rev. 1.0 (8AD, 8DI, 2PC/FC, 8RLY, 6A0, RS485/RS232, I2C) vMBusX-S8 RTU Rev. 3.0 (6AD, 1AO, 2DI, 2RLY, RTD, BAT) Keys: AI Analog Input AO Analog Output DI Digital Input DO Digital Output FC Frequency Counter PC Pulse Counter RLY Solid State Relay RTD Resistance Temp Device RTU Remote Terminal Unit TM Tank Monitoring