300w monaural power amplifier rpa-mg1000...300w monaural power amplifier rpa-mg1000 an amplifier is...
TRANSCRIPT
-
300W MONAURAL POWER AMPLIFIER
RPA-MG1000
-
An amplifier is a musical instrument.
The wood panels are made of thick spruce ,
which is the same material as the top
of violin. They vibrate with music and bring
out the beautiful sound.
The “spruce” panels integrated with
the amplifier provides excellent rich
and natural tone.
RPA-MG1000
-
Large sized R-CORE TRANSFORMER
supplies a large volume of power
excessively powerful and high-purity electrical current
will drive your speakers directly through the FETs.
RPA-MG1000
-
A pair of small FET amplifies
the music signal simply and directly.
simple and small circuit enables the sound with high-speed
and highly clear tone. It is due to FETs almost completely
prevent heat generation.
Very small FETs
by Infineon
Technologies
amplify music
signal up to
300W amplitude.
RPA-MG1000
-
RPA-MG1000
SPEC power amplifiers feature an analog electronic attenuator immediately
ahead of the power stage able to take high signal levels from source devices.
This method is very advantageous with respect to noise, and it is possible to
transmit a very small signal directly from the source equipment to the
amplifier circuit. You can listen to ever-fresh music.
-
You can select MUSICALITY
1 Neutral: very close to actual sound of instruments
2 Sophisticated: Art quality beyond the actual sound
It is a quite different method from that of a conventional
tone control. Frequency characteristic does not change at
all. Each tastes are depending on the adopted parts itself.
Isn't it a job of pre- amplifier ? No!
Class D circuit has a very sensitive point . At the post-stage
of CLASS-D, musicality change can be achieved very effectively.
We don’t change Frequency characteristic , we change
MUSICALITY at the post-stage of CLASS D.
RPA-MG1000
-
RPA-MG1000
Specifications and appearance may change without prior notice.