3.15 ais interface circuit (nqa-4250) (option) · 2014-07-14 · 3─29 3.15 ais interface circuit...
TRANSCRIPT
3─29
3.15 AIS INTERFACE CIRCUIT (NQA-4250) (OPTION)
Install the AIS interface circuit in the processing unit according to the procedures below:
(1) Set the jumper plugs and the switchs , as shown in the figure. (2) Remove the processing unit cabinet cover, loosen the screws that mount the terminal board to the cabinet,
and remove the terminal board from the processing unit cabinet.
S101
S100 1
0
ON
1 2 3 4 5 6 7 8
S102
S100
S101
S102
1
0
ON
1 2 3 4 5 6 7 8
1
0
ON
1 2 3 4 5 6 7 8
3─30
3
3.15 AIS INTERFACE CIRCUIT (NQA-4250, OPTION)
(3) Connect the trident ends of the cable (H-7ZCRD0908) attached to the AIS interface circuit to the AIS interface circuit's connectors as shown in the following table:
Cable side AIS interface side
P1 J1
P400 J400
P510 J510
(4) Securely fix the AIS interface circuit at the location in the processing unit as shown in the following photograph.
AIS interface circuit
Place the interface circuit with "MADE IN JAPAN" up.