32mm - 45mm f 55mm rose r internal door furniture f ternal ... · internal door furniture f ternal...

1
INSTALLATION OF PASSAGE AND PRIVACY SET Internal Door Furniture VELOCITY Internal Door Furniture R INSTALLATION OF ENTRANCE SET 32MM - 45MM DOOR THICKNESS Q50093 1112 1 2 3 Entrance set installation (steps 1 - 8) 4 5 5 Refer to instructions Lockwood Mortice Lock for door preparation and lock installation. 7 8 48mm 56mm 32 - 38mm 38 - 45mm Drill 7 Holes - 22mm Dia 90mm Deep Centreline of door Door Detach template from box (Pentagon) Mark centreline of door Template Door Mark position for holes Measure door thickness to determine the correct choice of screw length. Screw lengths for door thickness. Align spindle into square opening in Mortice Lock, position lever assembly so that it operates downwards to retract bolt. Align and fit hex nuts into the exterior side of door through the horizontal screw holes. Align screws through interior side of door. Fasten lever furniture to both sides of door with screws and hex nuts. 6 Position removal tab to the bottom Removal tab Position cover plate escutcheons firmly over the furniture. Position removal tab to the bottom. Horizontal screw holes Square hole in Mortice lock Rotate lever to fit screws Hole positions for lever assembly Entrance set Parts and assembly Hex nuts 55mm Rose VELOCITY 55mm Rose ®

Upload: others

Post on 18-Jul-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 32MM - 45MM F 55mm Rose R Internal Door Furniture F ternal ... · Internal Door Furniture F ternal Door Furniture R T 32MM - 45MM DOOR THICKNESS Q50093 1112 1 2 3 Entrance set installation

INSTALLATION OF PASSAGE AND PRIVACY SET Internal Door Furniture VELOCITY Internal Door Furniture

R

INSTALLATION OF

ENTRANCE SET 32MM - 45MM

DOOR THICKNESS

Q50093 1112

1 2 3

Entrance set installation (steps 1 - 8)

4 5

5

Refer to instructions Lockwood Mortice Lock for door preparation and lock installation.

7 8

48mm 56mm

32 - 38mm

38 - 45mm

Drill 7 Holes -22mm Dia90mm Deep

Centrelineof door

DoorDetachtemplatefrom box(Pentagon)

Markcentrelineof door

Template

Door

Mark positionfor holes

Measure door thickness to determine the correctchoice of screw length.

Screw lengths for door thickness. Align spindle into square opening in Mortice Lock,position lever assembly so that it operates downwards to retract bolt.

Align and fit hex nuts into the exterior side ofdoor through the horizontal screw holes.

Align screws through interior side of door.Fasten lever furniture to both sides of door with screws and hex nuts.

6

Position removal tabto the bottom

Removal tab

Position cover plate escutcheons firmly over the furniture.Position removal tab to the bottom.

Horizontal screw holes

Square hole in Mortice lock

Rotate lever to fit screws

Hole positionsfor lever assembly

Entrance setParts and assembly

Hex nuts

55mm Rose

VELOCITY 55mm Rose®