33° 12° 0° - kulzer us › media › webmedia_local › north... · 2020-05-07 · the aim of...
TRANSCRIPT
Brochure
40
00
41
04
0
6/1
7
©2017 Kulzer, LLC. All Rights Reserved.
Manufactured by:Kulzer GmbhLeipziger Straße 263450 Hanau, [email protected]
kulzerUS.com
BasicVision arising out of tradition
A new era in the manufacturing of artificial teeth commenced in 1965 with the introduction of the INCOMP (injection/compression) process. This technology was developed by a company that had been founded three years previously by Dr. Kurt Schilling, later to be known as “Lindauer Zähne”.
The aim of this new technology was to substantially improve the quality of artificial teeth. Continuous optimization of the individual process stages and of material selection resulted in a constant increase in the range of artificial teeth available and consequently in their worldwide market share.
Between 1978 and 1995, the company was part of a major German chemicals company prior to its acquisition by Heraeus Kulzer in September 1995. Today the company is known as Kulzer, LLC, a subsidiary of Mitsui Chemicals Group.
Mould Numbers and Possible Combinations
Upper anteriors Lower anteriors Posteriors 0° Posteriors 12° Posteriors 33°
Ovoid
L 01 U 01 GO/GU EO/EU BO/BU
L 02 U 01 GO/GU EO/EU BO/BU
L 03 U 02 GO/GU EO/EU BO/BU
L 04 U 02 GO/GU EO/EU BO/BU
L 05 U 03 HO/HU FO/FU CO/CU
L 06 U 06 HO/HU FO/FU DO/DU
Triangular
A 10 U 04 GO/GU EO/EU CO/CU
A 11 U 05 HO/HU FO/FU CO/CU
A 12 U 07 HO/HU FO/FU DO/DU
A 13 U 07 HO/HU FO/FU DO/DU
Round
TO 05 U 03 GO/GU EO/EU BO/BU
TO 10 U 05 HO/HU FO/FU CO/CU
TO 20 U 04 HO/HU FO/FU DO/DU
TO 30 U 06 HO/HU FO/FU DO/DU
Available in 16 shades (A1–D4). Kulzer teeth meet and exceed all the requirements of EN ISO 22112:2006 and ANSI/ADA Specification No. 15-1999.
Distributed by:Kulzer, LLC4315 S. Lafayette Blvd.South Bend, IN 46614(800) 431-1785
Pala BasicMould Chart
Giving a hand to oral health.
Pala® PolishAchieve a high shine and remove scratches in one step.
The cream for polishing dental appliances Simultaneously removes scratches and leaves a high shine on dental appliances. No need for pumice. Reduce polishing times. Available in an 80 gram jar.
Also from Kulzer:
Pala Basic Mould Chart.indd 1 9/19/2017 12:02:25 PM
Brochure
40
00
41
04
0
6/1
7
©2017 Kulzer, LLC. All Rights Reserved.
Manufactured by:Kulzer GmbhLeipziger Straße 263450 Hanau, [email protected]
kulzerUS.com
BasicVision arising out of tradition
A new era in the manufacturing of artificial teeth commenced in 1965 with the introduction of the INCOMP (injection/compression) process. This technology was developed by a company that had been founded three years previously by Dr. Kurt Schilling, later to be known as “Lindauer Zähne”.
The aim of this new technology was to substantially improve the quality of artificial teeth. Continuous optimization of the individual process stages and of material selection resulted in a constant increase in the range of artificial teeth available and consequently in their worldwide market share.
Between 1978 and 1995, the company was part of a major German chemicals company prior to its acquisition by Heraeus Kulzer in September 1995. Today the company is known as Kulzer, LLC, a subsidiary of Mitsui Chemicals Group.
Mould Numbers and Possible Combinations
Upper anteriors Lower anteriors Posteriors 0° Posteriors 12° Posteriors 33°
Ovoid
L 01 U 01 GO/GU EO/EU BO/BU
L 02 U 01 GO/GU EO/EU BO/BU
L 03 U 02 GO/GU EO/EU BO/BU
L 04 U 02 GO/GU EO/EU BO/BU
L 05 U 03 HO/HU FO/FU CO/CU
L 06 U 06 HO/HU FO/FU DO/DU
Triangular
A 10 U 04 GO/GU EO/EU CO/CU
A 11 U 05 HO/HU FO/FU CO/CU
A 12 U 07 HO/HU FO/FU DO/DU
A 13 U 07 HO/HU FO/FU DO/DU
Round
TO 05 U 03 GO/GU EO/EU BO/BU
TO 10 U 05 HO/HU FO/FU CO/CU
TO 20 U 04 HO/HU FO/FU DO/DU
TO 30 U 06 HO/HU FO/FU DO/DU
Available in 16 shades (A1–D4). Kulzer teeth meet and exceed all the requirements of EN ISO 22112:2006 and ANSI/ADA Specification No. 15-1999.
Distributed by:Kulzer, LLC4315 S. Lafayette Blvd.South Bend, IN 46614(800) 431-1785
Pala BasicMould Chart
Giving a hand to oral health.
Pala® PolishAchieve a high shine and remove scratches in one step.
The cream for polishing dental appliances Simultaneously removes scratches and leaves a high shine on dental appliances. No need for pumice. Reduce polishing times. Available in an 80 gram jar.
Also from Kulzer:
Pala Basic Mould Chart.indd 1 9/19/2017 12:02:25 PM
Anteriors Anteriors
Posteriors
Posteriors
Available in 16 shades (A1–D4). Kulzer teeth meet and exceed all the requirements of EN ISO 22112:2006 and ANSI/ADA Specification No. 15-1999.
Pala Basic Mould Chart.indd 2 9/19/2017 12:02:34 PM
Anteriors Anteriors
Posteriors
Posteriors
Available in 16 shades (A1–D4). Kulzer teeth meet and exceed all the requirements of EN ISO 22112:2006 and ANSI/ADA Specification No. 15-1999.
Pala Basic Mould Chart.indd 2 9/19/2017 12:02:34 PM
Anteriors Anteriors
Posteriors
Posteriors
Available in 16 shades (A1–D4). Kulzer teeth meet and exceed all the requirements of EN ISO 22112:2006 and ANSI/ADA Specification No. 15-1999.
Pala Basic Mould Chart.indd 2 9/19/2017 12:02:34 PM
Brochure
40
00
41
04
0
6/1
7
©2017 Kulzer, LLC. All Rights Reserved.
Manufactured by:Kulzer GmbhLeipziger Straße 263450 Hanau, [email protected]
kulzerUS.com
BasicVision arising out of tradition
A new era in the manufacturing of artificial teeth commenced in 1965 with the introduction of the INCOMP (injection/compression) process. This technology was developed by a company that had been founded three years previously by Dr. Kurt Schilling, later to be known as “Lindauer Zähne”.
The aim of this new technology was to substantially improve the quality of artificial teeth. Continuous optimization of the individual process stages and of material selection resulted in a constant increase in the range of artificial teeth available and consequently in their worldwide market share.
Between 1978 and 1995, the company was part of a major German chemicals company prior to its acquisition by Heraeus Kulzer in September 1995. Today the company is known as Kulzer, LLC, a subsidiary of Mitsui Chemicals Group.
Mould Numbers and Possible Combinations
Upper anteriors Lower anteriors Posteriors 0° Posteriors 12° Posteriors 33°
Ovoid
L 01 U 01 GO/GU EO/EU BO/BU
L 02 U 01 GO/GU EO/EU BO/BU
L 03 U 02 GO/GU EO/EU BO/BU
L 04 U 02 GO/GU EO/EU BO/BU
L 05 U 03 HO/HU FO/FU CO/CU
L 06 U 06 HO/HU FO/FU DO/DU
Triangular
A 10 U 04 GO/GU EO/EU CO/CU
A 11 U 05 HO/HU FO/FU CO/CU
A 12 U 07 HO/HU FO/FU DO/DU
A 13 U 07 HO/HU FO/FU DO/DU
Round
TO 05 U 03 GO/GU EO/EU BO/BU
TO 10 U 05 HO/HU FO/FU CO/CU
TO 20 U 04 HO/HU FO/FU DO/DU
TO 30 U 06 HO/HU FO/FU DO/DU
Available in 16 shades (A1–D4). Kulzer teeth meet and exceed all the requirements of EN ISO 22112:2006 and ANSI/ADA Specification No. 15-1999.
Distributed by:Kulzer, LLC4315 S. Lafayette Blvd.South Bend, IN 46614(800) 431-1785
Pala BasicMould Chart
Giving a hand to oral health.
Pala® PolishAchieve a high shine and remove scratches in one step.
The cream for polishing dental appliances Simultaneously removes scratches and leaves a high shine on dental appliances. No need for pumice. Reduce polishing times. Available in an 80 gram jar.
Also from Kulzer:
Pala Basic Mould Chart.indd 1 9/19/2017 12:02:25 PM