8/12/2019 3313_OPM

1/48

FT3113/ 33

OPERATINGINSTRUCTIONS

RI COHCOMPANY LTD

8/12/2019 3313_OPM

2/48

Note to users in the United States of AmericaWarning:This equipment has been tested and found to comply with the limits for aClass A digital device, pursuant to Part 15 of the FCC Rules. These limitsare designed to provide reasonable protection against harmful interferencewhen the equipment is operated in a commercial environment. This equip-ment generates, uses, and can radiate radio frequency energy and, if notinstalled and used in accordance with the instruction manual, may causeharmful interference to radio communications. Operation of this equipmentin a residential area is likely to cause harmful interference in which case theuser will be required to correct the interference at his own expense.

Note to users in CanadaWarning:This Digital Apparatus does not exceed the Class A limits for Radio Fre-quency noise from Digital Apparatus set out in the Radio InterferenceRegulations of the Canadian Department of Communications.Remarque concernant Ies utilisateurs au CanadaAvertissement:Le present appareil numerique nemet pas de bruits radioelectriques de-passant Ies Iimites applicable aux appareils numeriques de la classe Aprescribes clans Ie Reglement sur Ie brouillage radioelectrique edicte parIe ministere de Communications du Canada.

In accordance with ISO Standard 7001, this machine uses the followingsymbols for the main switch:

I means POWER ON.o means POWER OFF.I means STAND BY.(_)Ricoh shall not be responsible for any damage or expense that may resultfrom the use of parts other than genuine Ricoh parts in your 13icoh office pro-duct.

8/12/2019 3313_OPM

3/48

INTRODUCTIONThis copier is a desktop plain paper copier which is carefully manufactured toexacting standards of high performance. It consistently yields high contrastcopies with a superior finish.This manual contains detailed instructions on the operation and maintenance ofthis copier. To get maximum versatility from this copier, all operators shouldcarefully read and follow the instructions in this manual. Please keep thismanual in a handy place near the machine.

1

2.

3.

4.

5.

Fast copy speed:+ 13 copies (81/2 Xll

FEATURESlengthwise) per minute

Wide range of reproduction ratios (FT3313 only):+ 6 fixed reproduction ratios plus a zoom function from 6170 to 141 ?40 in

1 ?Jo steps,Paper feeding system:+ One 250-sheet paper tray+ Manual feed entrance (one sheet feeding)Additional versatile functions:+ Auto image density assures high quality reproduction.+ Auto start mode automatically starts copying.Optional equipment+ Document feeder+ Key counter

8/12/2019 3313_OPM

4/48

TABLE OF CONTENTS

GUIDE TO COMPONENTSI, System Overview ...... . .... .... . . 12. Copier Exterior . ... .. .... .. ... .... .. 23. Copier interior . .. ... .... .. ... .... .. . 44.0peration Panel .... ... .. . .. . .. . .. . 6

COPYING1.2.3.4.5.6.

Starting the Copier..,..,,,,..,.,, 8Standard Copying..,..........,.. 9Manual Feed Copying.., .. .. ... 11Interrupt Copying o... . . .. .. . .. ....12Reduction and Enlargement(1733130nly) . . . .. . .. . .. . .. . . .. .. . ..l3Zoom (FT3313 only) .,...,...0 .014

SPECIAL FEATURES . .. ... .... .. ....15

REPLENISHING SUPPLIES1. Loading Paper . .. ... ... ... ... .. ....162. Adding Toner . . .. .. . .. .. .. .. .. .. ....18

OPTIONAL FUNCTIONS(Document Feeder)123

Document Feeder Exterior,.. 20Automatic Document Feed(ADF) ..... . . . . . . .. . . . . .. . . . .. . . . .. . ,,, . . 21Interrupt Co ying with?ocument ceder.,.....,,.22..,.22

TROUBLESHOOTING1. Clearing Misfeeds .. .. . . .. . .. . . ....232. Troubleshooting Guide ... .. ....303, Service Codes . .. . .. . .. .. . ... . .. . ...324. Others ..................................32

DAILY MAINTENANCE1, Copier ,,, ,,.0,..,,0,, ,0,,.., ,.,,, ,,..,., 332. Document Feeder . ... .. ... ... ....34

DOS AND DONTS . .. .. . .. .. .. . .. .. ...35INSTALLATION REQUIREMENTS102.3,4.

Copier Environment . .. .. .. .. . ...38Environments to Avoid. .. ... ...39Power Connection . . .. .. . .. . .. . ...4OAccess to Copier . .. . .. . .. .. .. .. ...4O

SPECIFICATIONS1, Main Copier ..........................412. Document Feeder . .. ... .. .... ....43

8/12/2019 3313_OPM

5/48

I GUIDE TO COMPONENTS I1. Svstem Overview

These copiers can be equipped with an optional For more information about the document feeder,

TIONS (Document Feeder).document feeder as shown:see page 20 OPTIONAL FUNC-

derFT33 13)

l

8/12/2019 3313_OPM

6/48

2. Copier Exterior

F8

2

8/12/2019 3313_OPM

7/48

1. Operation Panel

2. Left Scale3. Exposure Glass4. Platen Cover5. Key Counter Holder6. Manual Feed

Entrance7. Manual Feed Guides8. Front Cover

9. Paper Tray

10. Main Switch

11. Copy Tray

Operator controls and indicators are locatedhere.Use to align originals on the exposure glass,Position originals here for copying.Lower this cover over originals before copying.Insert the optional key counter hereUse to feed paper that is a different size fromthat which is in the paper tray.Use to align paper in the manual feed entrance.Open to access the inside of the copier. (To addtoner, remove a misfed paper, etc.)The paper tray can hold 250 sheets of copypaper,Switches the copier between on and stand-byconditions. (stand-by = only anticondensationheater on)Completed copies are delivered here

3

8/12/2019 3313_OPM

8/48

3. Copier InteriorIFT3113/FT33131

34, /

4

8/12/2019 3313_OPM

9/48

8/12/2019 3313_OPM

10/48

4. Operation Panel

12345 67 8 9I 1 Quantity Interrupt

&J 2+ /~/ IJ +r &

/_/ \_/I 1

(liiiiiib O -

Lighter Darker Auto Image Density Clear/Stop m starta B CB c/o o

I

14 13 12 11 1

1. Add Toner Indicator 5.IYinks when it is time to changethe toner cartridge. When itlights continuously, the copiercannot be used until a new 6.cartridge is installed,

2. Manual Image Density

3

4

IndicatorShows the manually selected 7.image density. If this indicatorblinks, refer to page 32.Check Paper Path Indicator 8.Lights if there is a misfeed withinthe machine.Auto Image Density Indicator 9.Lights when the copier is auto-matically controlling image den-sity. If this indicator blinks, refer 10.to page 32,

Copy CounterDisplays the number of copiesentered. While copying, it showsthe number of copies made.Increase Quantity KeyPress to increase the number ofcopies to be made.Decrease Quantity KeyPress to decrease the numberof copies to be made.Interrupt IndicatorLights when interrupt mode ormanual feed mode is selected.Interrupt KeyPress to make interrupt copiesduring a copy run,Start KeyPress to start copying,

6-

8/12/2019 3313_OPM

11/48

17 18 19 123456789Zcc.m ~ Q.mtfty )terrupl+

I f la qr 7

/7 + :d/77ST I 1

Lkc/L I_ .......allilm Q -

WE Full sue L,ghter Darker Auto Image Dens,t Clearc30

I ICI Stan

H H a D Q Clo o

16 15 14 13 12 11 1

11

12.

13.

14.

Start Indicator < FT3313 only>When the Start indicator is red,the machine is not ready to 15. Full Size Keycopy. When the Start indicatoris green, the machine is ready tocopy,Clear/Stop Key 16Press to cancel the copy num-ber entered. While copying,press to stop copying. 17Auto Image Density KeyPress to select/cancel the auto-matic image density mode. 18Manual Image Density KeysUse to cancel the automaticimage density mode and manual- 19Iy select the image density level.

Press to make copies the samesize as the originals.Reduce/Enlarge KeyPress to make reduced or en-larged copies.Zoom Down KeyPress to reduce the reproductionratio in 1 0/0 steps.Zoom Up KeyPress to increase the reproduc-tion ratio in 170 steps.Magnification Ratio IndicatorShows the selected reproductionratio.

7-

8/12/2019 3313_OPM

12/48

I COPYING I1. Starting the Copier

1. Turn on the main switch.

L

Wait for the copier to warm up.During the warm-up period (ap-proximately 30 seconds), the Startindicator stays red,When the warm-up period is com-pleted, the Start indicator turnsgreen. The copier is ready to makecopies.

4,

If you press the Start key during thewarm-up period, the red Start indicatorwill blink. Then the copier will automat-ically start copying after the warm-upperiod. (Auto Start mode)

At the end of the day, turn off themain switch.

I I

8-

8/12/2019 3313_OPM

13/48

2. Standard Copying1. Place the original face down on theexposure glass.

The original should be centered ac-cording to the size marks on the leftscale. Narrow margins at the leading and side

edges of the original are not copied.

2. Set the image density level to matchthe type and quality of the original. This is not necessary if Auto Image

Density is on.

3. Enter the number of copies requiredusing the Increase Quantity key orDecrease Quantity key. Up to 99 copies can be entered. To change the number entered, press

the Clear/Stop key and then enter thenew number. Or, use the Quantitykeys to enter the new number.

4. Lower the platen cover.

9

8/12/2019 3313_OPM

14/48

5. Press the Start key. To stop the machine during a multicopyrun, press the Clear/Stop key. Press the Start key to resume copying

or press the Clear/Stop key again toclear the copy counter.

6. Remove the copies from the copytray and the original from the ex-posure glass, The copy tray holds approximately 100copies.

If you make 81/2 x 14 size copies, ex-tend the copy tray to stack themproperly.

If transparenciesfail to stack properly inthe copy tray, raise the left end of thecenter rib.

lo

8/12/2019 3313_OPM

15/48

3. Manual Feed CopyingUse the manual feed entrance for paper of unusual size or weight.

One sheet should be inserted into the manual feed entrance at a time.Manual feed copying also may be used for OHP transparencies, adhesive labels, or postcards.

1 Place the original face down on theexposure glass.The original should be centered ac-cording to the size marks on the leftscale. Narrow margin at the leading and side

edges of the original are not copied.

2.

3.

4.

Slide the manual feed guides toproper width. Pull out the extender to support

copy paper.

thethe

Insert the copy paper into themanual feed entrance until the in-terrupt indicator lights and the Startindicator turns green.Follow the standard copying proce-dure, (See page 9.)

11

8/12/2019 3313_OPM

16/48

4. Interrupt Copying

Press the Interrupt key to interrupt a multicopy run, and make urgently neededcopies.. When copying with the document feeder, the interrupt procedure is slightly different. Seepage 22.

1.

2.

3.

4.

5.

Press the Interrupt key, The copier will stop the copy run and

store the previous copy settings inmemory.

The copier will return to standard mode. The reproduction ratio will not be reset.

(FT3313 only)

Remove the previous original fromthe exposure glass and place theinterrupt original.Make copies following the standardcopying procedure. (See page 9.)

After interrupt copying is completed,press the Interrupt key again torecall the previous copy settings.Reset the previouspress the Start key, original and

12

8/12/2019 3313_OPM

17/48

5. Reduction and Enlargement (FT3313 only)

I

Press the Reduce/Enlarge key toreduce or increase the reproductionratio. The reduction ratio will change asfollows:

65 ~ 74 93

L 129 121 J

-13

8/12/2019 3313_OPM

18/48

6. Zoom (FT3313 only)

In this mode, the reproduction ratio can be changed from 61 YO to 141 YO in 1percent steps.

1. Press the Zoom Down key repeat-edly to reduce the ratio in 1 steps.Or, press the Zoom Up key repeat-edly to increase the ratio in 1 40steps.

2. Follow the standard copying proce-dure. See page 9.

-14-

8/12/2019 3313_OPM

19/48

I SPECIAL FEATURES ISome of this copiers features can be adjusted by your service representativeto suit your application needs. This section gives a brief description of thesefeatures. If you wish to get more information or use the following features,contact your service representative.I. Automatic Reset Time1 minute after the final copy is made, all input modes are reset to standardmodes. If a 1 minute reset time is not appropriate for your needs, 3 minutes orno automatic reset can be selected.

2. Copy Counter UP/DOWNEither count-up (standard setting) or count-down can be selected.

3. Auto Image Density PriorityAuto Image Density mode is the standard mode. However, you can cancel thissetting, and select the Manual Image Density mode as the standard mode.

4. Auto Image Density LevelThe auto image density level can be made lighter or darker.

5. Maximum Copy QuantityThe maximum copy quantity can be set from 1 to 99, (99 is standard setting.)

-15

8/12/2019 3313_OPM

20/48

REPLENISHING SUPPLIES1. Loading PaperJ1 is displayed on the copy counter when the paper tray in use runs out ofpaper. Load paper as follows.

. The following cannot be used in the paper tray. Use the manual feed entrance.1) Post cards 2) Translucent paper 3) OHP sheets 4) Adhesive labels

~______ I

1

2.

3.

Pull out the paper tray. If paper is in the tray, there is a papermisfeed. See page 23 - TROUBLE-

SHOOTING.

Push the bottom plate down until itlocks,

Load paper in the paper tray. Make sure not to stack paper above the

limit marks inside the paper tray. Maximum capacity: 250 sheets

-16-

8/12/2019 3313_OPM

21/48

w 4. While pressing the release lever ofthe front side guide, push the guidel-. (l until the front and rear auidesAw

.? ?iQIT securely hold the paper. -5. Insert the end guide plate in the slotto hold the paper.

6,

7.

When different size paper is loaded,change the paper size plate to dis-play the correct paper size.

Reinsert the paper tray.

-17-

8/12/2019 3313_OPM

22/48

2. Adding TonerWhen the Add Toner ( ~ } indicator blinks, it is time to supply toner, Whenthe Add Toner indicator is continuously on, copies cannot be made until thetoner cartridge is replaced.

For good copy quality, Ricoh recommends that you use genuine Ricoh toner.

1. Open the front cover,

I 12. Push in the old toner cartridge, turnit clockwise until it stops, and pull itout,Warning: Do not incinerate the used toneicartridge. Toner dust may cause flashbackwhen ex~osed to open flame.

3, Shake the new toner cartridge welland insert it as shown in the illustra-tion.

t 1 ,4, Strip off the seal by pulling it while

inserting the new cartridge.5. Push in the toner cartridge com-pletely. Turn it counterclockwiseuntil it stops.6. Close the front cover.

18

8/12/2019 3313_OPM

23/48

Paper StoragePaper should always be stored properly, because poor paper condition willresult in poor image reproduction, creased copies, and paper misfeeds.Generally, to avoid curling and absorption of moisture.

I \\ 1/ 1

Toner Storage

Avoid storing paper in humidareas.NEVER store paper where it willbe exposed to heat.Store on a FLAT SURFACE,Use OLDER STOCK first.Do not lay heavy objects onpaper.Keep open reams of paper in thePACKAGE, and store as youwould unopened paper,

Store horizontally in a COOL,DARK place.Store toner cartridge flat.NEVER store toner where it willbe exposed to heat.Keep out of reach of children.Do not take internally.Do not lay heavy objects ontoner cartridges.Do not incinerate toner or tonercontainers. Toner dust maycause flashback when exposedto open flame.

19

8/12/2019 3313_OPM

24/48

I OPTIONAL FUNCTIONS (Document Feeder) 11. Document Feeder Exterior

h /2 / 3

The document feeder can be equipped only for the FT3313.

1. Original Guides Adjust these guides to center the originals sothat they are correctly fed onto the exposureglass.

2. Original Table3. Original Stacker4. Exit Unit

5. Grip6. Insert Original

Indicator7. Original Misfeed

Indicator

Place originals to be fed here.Originals are stacked here after exiting from thedocument feeder.Transports the originals from the belt unit to theoriginal stacker.Grip this part to lift the document feeder,Insert the original(s) into the document feederuntil this indicator goes out.Lights when an original misfeeds in the docu-ment feeder.

20

8/12/2019 3313_OPM

25/48

2. Automatic Document Feed (ADF)In this mode, the operator inserts a stack of originals into the original table.These originals are individually fed onto and removed from the exposure glass,

1. Square the stack of originals. Then,while adjusting the original guides,insert the originals face up into theoriginal table until the InsertOriginal indicator turns off, (ADFmode is automatically selected,) Last page should be on the bottom. Approximately 30 originals can be in-

serted at one time. Guides must fit snugly against both

sides of the stack.

2. Follow the standard copying proce-dure. (See page 9.)

3. The bottom sheet of the originalstack (last page) is copied first.

21

8/12/2019 3313_OPM

26/48

3. Interrupt Copying with Document FeederWhen copying using the document feeder, you can make interrupt copiesaccording to the following procedure.

I IY- .:.

1

2.

3.

4.

5.

6.

Press the Interrupt key. Theoriginal on the exposure glass willbe fed out of the exit unit, The copier will return to standard mode. The reproduction ratio will not be reset.(FT3313 only)

Remove the originals from theoriginal table.While adjusting the original guides,insert the interrupt original(s) untilthe Insert Original indicator turnsoff . Follow the standard copyingprocedure. (See page 9.)After completing interrupt copying,press the Interrupt key again toreturn the copier to the previouscopy setting,

If copying of the interrupted originalis not completed, return it to thebottom of the stack of originals.Insert the originals and continuecopying by pressing the Start key.

-22-

8/12/2019 3313_OPM

27/48

TROUBLESHOOTING I1. Clearing MisfeedsWhen there is a paper misfeed, a misfeedis displayed in the copy counter. If JO,Paper Path indicator ( ~.+ ) will also light.

location number ( JO, J1, J2, or J3 )J2 or J3 is displayed, the CheckRemove misfed paper as follows.

zoom Cuallw 1,) 6,, ,+ ~ -y. E/H + cl=4\ EL .......

1 Im YT. ,//:r ~--l-. Do not leave any torn scraps of paper within the copier. After removing the misfed paper, make sure that all units are returned to their original

positions and the top unit and front cover are closed.. When a paper misfeed occurs, the copier automatically keeps track of the selected copy

modes and how many originals have been completed. It is not necessary to reset thecopy modes and the copy quantity after removing misfed paper.

Repeat the procedures described in this section until the Check Paper Path indicator andmisfeed location number (JO, JI, J2, or J3) go out. (The indicators do not function unlessthe front cover is closed.)

Do not open the front cover after the misfeed condition is cleared. (The copiers memorywill be erased if you do.)

When the document feeder is equipped, make sure to use the top unit stand to keep thetop unit open.

-23-

8/12/2019 3313_OPM

28/48

\When J1 is displayed:l. If there is no misfed paper, it is time to load paper. See page 16, 1. Loading Paper.

I 1. Open the front cover,

2. Press the release lever, and lift thetop unit.With the document feeder, makesure to use the top unit stand tokeep the top unit open, as shown inthe illustration below,

3. While holding up the manual feedentrance, remove the misfed paper.

4, After using the top unit stand,replace it in its original position.Press down the top unit until it locksin place, and close the front cover.

-24

8/12/2019 3313_OPM

29/48

I I

5.

6.

If no misfed paper cantake out the paper tray. be found,

Remove the misfed paper, andreinsert the paper tray.

-25-

8/12/2019 3313_OPM

30/48

Iwhen ~~ and J2 are displayed:

1, Open the front cover.

2. Press the release lever, and lift thetop unit.With the document feeder, makesure to use the top unit stand tokeep the top unit open, as shown inthe illustration below,

3. Pull the misfed paper toward theright side carefully in order to avoidleaving any torn scraps of paper,Warning: The fusing section is hot. Becareful not to touch the hot fusing sectioncomponents.

4. After using the top unit stand,replace it in its original position,Press down the top unit until it locksin place, and close the front cover.

-26-

8/12/2019 3313_OPM

31/48

When ~~ and J3 are displayed:

1. Open the front cover.

1 J2. Press the release lever, and lift thetop unit.

With the document feeder, makesure to use the top unit stand tokeep the top unit open, as shown inthe illustration below.

3, While turning the fusing knob clock-wise, remove the misfed paper care-fully.

4, If the misfed paper cannot beremoved, take out the copy tray.

.-

8/12/2019 3313_OPM

32/48

5. While turning the fusing knobcounterclockwise, remo-ve themisfed paper carefully,Warning: The fusing section is hot. Becareful not to touch the hot fusing sectioncomponents. (

6. If no paper can be found, open theexit cover, and remove the misfedpaper,

7, After using the top unit stand,replace it in its original position.Press down the top unit until it locksin place, close the front cover, closethe exit door and reset the copytray,

28-

8/12/2019 3313_OPM

33/48

lWhen ~~ and JO are displayed:l

1.

2.

3,

Lift the document feeder until itstops and remove the original.

If the original is in the feed-in unit,pull the misfed original carefully. Be careful not to damage the original.

If the original is in the feed-out unit,pull the fiisfed original carefully. Be careful not to damage the original.

29

8/12/2019 3313_OPM

34/48

2. Troubleshooting Guide

Problem ActionNothing happens when Check the power cord. Is it properly pluggedthe switch is turned on. into the outlet?-+ Plug in firmly,

Is the front cover completely closed?--+ Close the front cover completely.The Start indicator does Is the Check Paper Path indicator on? ( ~~ )not turn to green within - Clear misfed paper. See page 23.about 30 seconds afterthe main switch is Is J1 displayed in the copy counter?turned on or the -+ Load paper. See page 16. Or, clearmachine stops during a misfed paper. See page 23.copy run.

Is the Add Toner indicator on? ( )+ oad a new toner cartridge. ee page18.The copy counter shows + Insert the key counter correctly,ll~lloCopies appear dirty. Does the original have a gray or coloredbackground?-+ Press the left Manual Image Density key

to lower the contrast,Is the platen cover, exposure glass, ordocument feeder belt dirty?+ Clean them as shown on page 33 and34.Is the Image Density level set correctly?+ Press the left Manual Image Density keyto decrease the image density.

30

8/12/2019 3313_OPM

35/48

Problem ActionCopies are too light.

Copies have whitestreaks.Copies have blackstreaks.Copies are blank.

Misfeeds occurfrequently.

Is the image density level set correctly?+ Press the right Manual Image Densitykey to increase the image density.Does the original have a low contrast image?4 Press the right Manual Image Density

key to increase the image density,.4 Clean the corona wire. See page 33.-+ Clean the cleaning blade. See page 34..-+ Clean the cleaning blade. See page 34.

Is the original placed face down on theexposure glass or face up on the documentfeeder?+ Place the original properly. See page 9or 21.Is the charge corona unit inserted all the way?-+ Push the charge corona unit in all theway.

Is the right kind of paper in the paper tray?+ Paper size and weight must be within th~minimum and maximum standards setfor this copier.

Is folded, wrinkled, damp,or curled paper inthe paper tray?+ Always use dry, undamaged paper.Is the paper properly set in the paper tray?+ Always load paper correctly. Are there any pieces of misfed paper or otherforeign objects in the machine?+ Make sure that the paper path iscompletely clear of paper and othermaterial after a misfeed. -

Ifyou cannotcorrectthe problem by takingthe above actions,please contact >our servicerepresentative.

31

8/12/2019 3313_OPM

36/48

3. Service Codes

- mlazil -The copiers microcomputer constantly monitors mechanical and electricalfunctions. If a malfunction occurs, E and service code numbers will blinkalternately in the copy counter. If that happens, turn the main switch off, waita few seconds, and then turn it on.If the service code appears again, call your service representative.

IEz lWhen the used toner tank is full, E and 70 will start to blink alternately in thecopy counter. (Only 250 copies can be made after this.) Call your servicerepresentative.

I I I 1

t 1 I I 1 D t&_ rQ /,\_I I E blinks. ~ Service code number blinks.4. OthersIf either the auto image density indicator or the manual image density indicatorstarts to blink, turn the main switch off and on again. Call your servicerepresentative and explain the problem if this condition re-occurs. (while thiscondition exists, however, copies can be made,)

32

8/12/2019 3313_OPM

37/48

DAILY MAINTENANCETo maintain a high copy quality, clean the following parts and units regularly.

1 Copier Exposure Glass

Platen Cover I

Corona Wire

Clean the exposure glass with adamp cloth and wipe it with a drycloth.

Clean the platen cover with a dampcloth and wipe it with a dry cloth. Ifstains do not come off, use a weakcleaning solution.

Do the following when white streaksappear on the copy or when imagedensity becomes uneven,1. Open the front cover.2. Slide the corona unit in and outseveral times.3. Push the corona unit back in.Make sure it locks into place.4. Close the front cover.

33

8/12/2019 3313_OPM

38/48

Cleaning Blade ,

Do the following when black lines orwhite lines appear on the copy.

1. Open the front cover.2. Push down the cleaning bladeknob several times.3. Close the front cover.

2. Document Feeder Feed-in Unit Clean the original table and originalguides with a damp cloth. Use aweak cleaning solution if stains donot come off.

Lift the document feeder. Clean thetransport belt with Belt Cleaner.

IBe sure to read the warning on thecontainer of Belt Cleaner before using it. I

34

8/12/2019 3313_OPM

39/48

DOS AND DONTS Iperation Cautions 1

2.

3.4.5.

6.

7.

8.

9.

10.

While Copying:- Do not turn off the main switch,- Do not open the front cover.- Do not lift the platen cover.- Do not unplug the power cord.Do not lay anything weighing more than 22 lb on the exposure glass.

Do not place tools or other hard objects on the exposure glass.Keep corrosive liquids, suchDo not touch copy paper if

as acid, off the machine.your fingers are wet or oily; fingerprints may

appear on the copy,Do not allow paperinside the machine.

clips, staples, or other small metallic objects to fall

Always turn the copier off when you have finished copying for the day.

When making duplex copies, do not load paper in the paper tray to copyon the second side. Use the manual feed entrance.Copies may be slightly curled after coming out of the copier. So, ifnecessary, uncurl the paper before inserting it in the manual feedentrance to make a duplex copy.The following cannot be used in the paper tray. Use the manual feedentrance. One sheet should be inserted into the manual feed entrance ata time.1) Post cards 2) Translucent paper 3) OHP sheets 4) Adhesive labels

-35

8/12/2019 3313_OPM

40/48

General Cautions 1

2.

3,

4.

5.

6,

7.

Since some parts of the copier are supplied with high electrical voltage,touch only the parts specified in this manual.Do not modify or replace any parts other than the ones specified in thismanual.When the copier will not be used for a long period, disconnect the powercord.If the copier must be transported by vehicle, please contact your servicerepresentative.When the main switch is in the Stand-by position, the optional anticon-densation heater is on. In case of emergency, unplug the machinespower cord.Do not incinerate toner or toner containers, Toner dust may cause flash-back when exposed to open flame,This copier contains an ozone filter. It should be replaced by your ser-vice representative every 80,000 copies,

Document Feeder Dos and Donyts 1. Do not press down on or hold originals after inserting them in the feed

unit,2, Do not lift the document feeder unit until the last original has been com-

pletely fed out to the original stacker. If you do, an original misfeed mayoccur.

3. When you are not using the document feeder, do not insert anything inthe feeder entrance,

4, Make sure to use the top unit stand whenever opening the top unit,

36

8/12/2019 3313_OPM

41/48

5. The following types of originals are not recommended for use with thedocument feeder, Please place them directly onthe exposure glass.

____G /4I 7 p~J I . Very thick and very thin paper.,9.g, ?~ -1/ iidf. Paper with any kind of coating(such as carbon) on the back ororiginals that are taped together,. Fax thermal paper.

Originals smaller than 51/2 x81/2. Originals larger than 11 x 17.

. Folded, curled, creased, ordamaged originals,

Mailing labels, perforatedoriginals, paste-up originals.

. Bound, stapled, or clippedoriginals. OH P transparencies.

-37

8/12/2019 3313_OPM

42/48

I INSTALLATION REQUIREMENTS I1. Copier Environment

The installation location should be carefullv chosen because environmentalconditions greatly affect the performance of { copier. Optimum environment conditions

Temperature :50 to 86F (1o to 30C To avoid possible ozone build-up,Humidity :15 to 90 10 RH install this copier in a large, wellventilated room with an air turnoverof at least 30 m3/hr/person.

On a strong and level base. (a sturdy desk,etc.)The copier must be level within 13/64(5 mm) both front to rear and left to right.

38

8/12/2019 3313_OPM

43/48

2. Environments to Avoid

Locations exposed to direct sunlightor strong light (more than 1,500 Iux).

Places higher than 6,500 ft (2,000m) above sea level.

Areas with corrosive gases.

Locations directly exposed to the coolair from an air conditioner or hot airfrom a heater. (Sudden temperaturechanges from low to high or vice versamay cause condensation within thecopier.)

Places where the copier may besubject to frequent strong vibration.

39

8/12/2019 3313_OPM

44/48

3. Power Connection

Connect the power cord to a powersource as follows: Do not set anything on the powercord.115V/60Hz : More than 15A

Voltage must not fluctuate more than 10 .Avoid multiwiring,Make sure that the wall-outlet is near the copier and easily accessible.Make sure that the plug is firmly inserted in the outlet.

4. Access to CopierPlace the copier near a power source, providing clearance as shown,

More than 3,9+

-More than More than11.8 23.6

Iore than 27.640

8/12/2019 3313_OPM

45/48

I SPECIFICATIONS I1. Main Copier

Configuration :Copy Process :Originals :Original Size :

Copy Paper Size :

Copy Paper Weight :

Reproduction Ratios :

DesktopDry electrostatic transfer systemSheet/BookMaximum 10 x 14 (for FT31 13)Maximum 11 x 17 (for FT3313)Maximum 10 x 14Minimum 51/2 x 81/2 (lengthwise)Paper tray feed: 14 to 24 lbManual feed: 14 to 42 lb2 Enlargement and 3 Reduction

Enlargement 129121 YoFull size 100?40Reduction 93?407465

Zoom;Copying Speed :

Warm-up Time :First copy Time :Copy Number Input :Manual Image DensitySelection :

Automatic Reset :

From 61 to 141 in 1 steps13 copies/minute (81/2 x 11 lengthwise)10 copies/minute (81/2 x 14)30 seconds (at 68F)9 seconds (81/2 x 11 lengthwise)QI Iantity keys, 1 to 99 (count up)7 steps

1 minute standard setting;minutes or no auto reset.

4l-

can also be set to 3

8/12/2019 3313_OPM

46/48

Paper Capacity : Paper tray: 250 sheetsManual feed table: 1 sheetToner Replenishment : Cartridge exchange (320g/cartridge)Copy Tray Capacity: 100 sheets (1 O x 14 or B4 and smaller)Power Source : 115V/60 Hz/15APower Consumption :

Copier only Copier withdocument feederMaximum 1,4 kW 1,5 kW

cop y cycle condition 0,81 kW 0.86 kWWarm up condition 0.60 kW 0.62 kW

Noise Emission:(Sound pressure level*) = The measurements are to be made according to ISO 7779.

Copier only Copier withdocument feederMaximum less than 58 dB less than 60 dB

cop y cycle condition less than 55 dB less than 55 dBWarm up condition less than 40 dB less than 40 dB

Dimensions :Width Depth Height

Copier only 32.7 23,0 15,9Copier with

document feeder 32,7 23,0 18,3(for FT3313)Weight : Copier only: 94.8 lbCopier with document feeder(for FT3313): 110,3 lbOptional Equipment : Document feeder

Specifications

Key counter

are subject to change without notice.

-42-

8/12/2019 3313_OPM

47/48

2. Document FeederOriginal Size :

Original Weight :Original Feed :Original Tray Capacity :Original Set :Original Transport :Copying Speed :Power Consumption :Dimensions(W XDX H):Weight :

Maximum: 11 x 17Minimum: 51/2 x 81/214t0281bAutomatic Feed - ADF mode30 sheets -20 lbFace up - First sheet on topOne flat belt13 copies/minute (81/2 x 11 lengthwise)35 w23.3 X 17.5 X 4.0

Approximately 15.5 lb

Specifications are subject to change without notice.

43

8/12/2019 3313_OPM

48/48

Overseas AffiliatesU.S.A. NetherlandsRICOH CORPORATION5 Dedrick PlaceWest Caldwell, New Jersey 07006(TEL) 201-882-2000NORTHEAST REGION5 Dedrick PlaceWest Caldwell, New Jersey 07006(TEL) 201-882-2101SOUTHEAST REGION3567 Parkway LaneSuite 150Norcross, GA 30092(TEL) 404-446-3533MIDWEST REGION100 West 22nd StreetSuite 150Lombard, IL 60148(TEL) 708-268-0405SOUTHWEST REGION125 East John Carpenter FreewaySuite 700Irving, TX 75062(TEL) 214-556-0965WESTERN REGION1231 Warner AvenueTustin, CA 92680(TEL) 714-259-1310NEW YORK BRANCH510 Fifth Ave. 4th FloorNew York, New York 10036(TEL) 212-869-1930WASHINGTON D.C.FEDERAL GOVERNMENT BRANCH1700 N. Moore StreetSuite 1030Arlington, VA 22209(TEL) 703-528-0040

RICOH EUROPE B.V.Groenelaan 3 P.O. Box 1141180 AC - Amstelveen Holland(TEL) 020-5474111United KingdomRICOH U.K. LTD.Ricoh House1 Plane Tree Crescent, Feltham,Middlesex, TW13 7HG(TEL) 081-751-6611GermanyRICOH DEUTSCHLAND GMBHMergenthalerallee 38-40,65760 Eschborn(TEL) (061 96) 906-0FranceRICOH FRANCE S.A.383 Avenue du General de Gaulle,B.P. 307, 92143 Clamart Cedex(TEL) 01-4094-3838SpainRICOH ESPANA S.A.Guitard, 4508014 Barcelona(TEL) 490-09-60ItalyRICOH ITALIA S.P.AVia della Metallurgic, 12(zona Basson) -37139 VERONA(TEL) 045-8510044Hong KongRICOH BUSINESS MACHINES, LTD.23/F , China Overseas Building,139, Hennessy Road,Wan Chai, Hong Kong