3.4-en-tete qr 3.4-en-tete hood medium qr page non
TRANSCRIPT
3.4-En-tete_QR
WARNINGATTENTION
A11 OFFNON* HOOD
PIN
HOOD STATUS : THE HOOD PIN SWITCH (INCLUDED)MUST BE INSTALLED IF THE VEHICLE CAN BE REMOTE STARTED WITH THE HOOD OPEN, SET FUNCTION A11 TO OFF.
CONTACTDE CAPOT
SECURITY STICKERAUTOCOLLANT DE SÉCURITÉ
MANDATORY INSTALL | INSTALLATION OBLIGATOIRE Notice: the installation of safety elements are mandatory. The hood pin and the sticker are essential security elements and must be installed. Notice: l'installation des éléments de sécurité est obligatoire. Le contact de capot et l'autocollant de sécurité sont des éléments de sécurité essentiels et doivent absolument être installés.
THIS MODULE MUST BE INSTALLED BY A QUALIFIED TECHNICIAN. A WRONG
CONNECTION CAN CAUSE PERMANENT DAMAGE TO THE VEHICLE.
CE MODULE DOIT ÊTRE INSTALLÉ PAR UN TECHNICIEN QUALIFIÉ, TOUTE
ERREUR DANS LES BRANCHEMENTS PEUT OCCASIONNER DES DOMMAGES
PERMANENTS AU VÉHICULE.
STATUT DE CAPOT : LE CONTACT DE CAPOT (INCLUS), DOIT ÊTRE INSTALLÉ SI LE VÉHICULE PEUT DÉMARRER À DISTANCE, LORSQUE LE CAPOT EST OUVERT, PROGRAMMEZ LA FONCTION A11 À NON.
IncludedInclus
REV.: 20211203
ADDENDUM - SUGGESTED WIRING CONFIGURATION ADDENDA - SCHÉMA DE BRANCHEMENT SUGGÉRÉ
ONE REV.: 20211203
3.4-En-tete_HOOD_MEDIUM_QR
Vehicle functions supported in this diagram (functional if equipped) | Fonctions du véhicule sup-portées dans ce diagramme (fonctionnelles si équipé)
VEHICLEVEHICULES
YEARS ANNÉES Im
mob
ilize
r byp
ass
Lock
Unl
ock
Arm
Dis
arm
Trun
k (o
pen)
Hor
m
Park
ing
Ligh
t
Tach
omet
er
Pow
er L
ift G
ate
Comfort GroupAUX.1
Groupe Confort
Doo
r Sta
tus
Trun
k S
tatu
s
Han
d-B
rake
Sta
tus
Foot
-Bra
ke S
tatu
s
Hoo
d S
tatu
s*
Sec
ure
Take
over
OEM
Rem
ote
mon
itorin
g
Rea
r Def
rost
Hea
ted
wip
er
Hea
td S
eats
Hea
ted
Mirr
ors
TOYOTASienna Hybrid Hush-to-Start 2021-2022 • • • • • • • • • • • • • • • • • • • • •
NOTES
The vehicles OEM remote and SmartKey are still operable during remote start.
La télécommande d’origine du véhicule et la clé intélligente reste fonctionnel même si le démarreur est engagé.
Guide # 101551
IF THE VEHICLE IS NOT EQUIPPED WITH FUNCTIONAL HOOD PIN:
SI LE VÉHICULE N’EST PAS ÉQUIPÉ D’UN CONTACT DE CAPOT FONCTIONNEL:
A11 OFFNON
Hood trigger (Output Status).
Contact de capot (état de sortie).
Program bypass option:Programmez l’option du contournement:
UNIT OPTIONOPTION UNITE DESCRIPTION
C1OEM Remote status (Lock/Unlock) monitoringSuivi des status (Verrouillage/Déverrouil-lage) de la télécommande d’origine
Vehicle hybrid onlyvéhicule hybride seulement D4 Hybrid mode (Vehicle hybrid only)
Mode hybride (vehicule hybride seulement)
Parts required (Not included) Pièce(s) requise(s) (Non incluse(s))
3X 1 Amp. Diodes 3X Diodes 1 Amp.
E6 ONOUI
OEM Alarm disable. This solution does not retain the OEM alarm.
Désactivation de l’alarme OEM. Cette solution ne conserve pas l’alarme OEM.
MODEL: EVO-ONEDATE:02/2019FORTIN.CA
SN: 000000 00000
MADE IN CANADA© 2018 ALL RIGHTS RESERVED
2019
COMPATIBLE MODULE
REQUIRED:
QR CODEON THE LABEL FIRMWARE VERSION
VERSION LOGICIELLETo add the firmware version and the options, use the
FLASH LINK UPDATER or FLASH LINK MOBILE tool, sold separately.
Pour ajouter la version logicielle et les options, utilisez l’outil FLASH LINK UPDATER
ou FLASH LINK MOBILE, vendu séparément.
MANUFACTURED AFTER: 2019
MODULE COMPATIBLE
REQUIS:
CODE QR SUR L’ÉTIQUETTE 88.[16]
FABRIQUÉ APRÈS: 2019 MINIMUM
D6 Push-to-StartPush-to-Start
Page 1 / 8
REGULAR INSTALLATION INSTALLATION RÉGULIÈRE
3.1-NOTES
This guide may change without notice. See www.fortin.ca for latest version.Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
NOTES
Program remote starter option:
Programmez l’option démarreur à distance:
FUNCTIONFONCTION MODE DESCRIPTION
8 2 Double 0.25 sec unlock pulse
Double pulse unlock de 0.25 sec.
34 2 TRUNK OUTPUT. Pulse 2.5 Seconds.
SORTIE VALISE. Pulse 2.5 Secondes
34 3 Trunk output : Unlock before trunk pulse 0.5 sec
Sortie Valise : Déverrouillage avant Valise (0.5 seconde)
38 4 Enable: Alarm controled by OEM Remote.
Activé : Contrôle de l’alarme par télécommande d’origine.
14 2 Alarm ON - Remote-starter ON
Alarme ON - Démarreur ON
Page 2 / 8
This guide may change without notice. See www.fortin.ca for latest version.Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
DESCRIPTION | DESCRIPTION
2021: (+)12 V
(-) GROUND
2022: (+)12 V
OBD-II connectorConnecteur OBD-II
(-)TRUNK
At PTS SwitchAu bouton PTS
ECU, Driver’s sideECU, Côté conducteur
Jonction block, left of drivers side ECUBlock de jonction, à gauche de l’ECU, côté conducteur
(~) CAN HIGH (~) CAN LOW(-) UNLOCK
(-) LOCK
(+) IGNITION 1
(+) IGNITION 2
(-) START/STOP2 (-) START/STOP3
(-) START/STOP1
C
B(~) IMI
(~) IMO
(+) STARTER A
D
D
BC
A
5
(-)HORN
At Steering Column À la colonne de direction
Page 3 / 8
Yellow In A1Purple Out A2
Purple/White Out A3Green Out A4White Out A5
Orange Out A6Orange/Black Out A7
Dk.Blue Out A8Red/Blue In A9
Lt.Blue/Black In/Out A10Black In A11Pink Out A12
Yellow/Black Out A13Brown/White In A14
Pink/Black In A15Purple/Yellow In/Out A16Green/White In/Out A17
Green/Red In/Out A18White/Black Out A19
Lt.Blue In/Out A20
C5 BrownC4 Gray/BlackC3 GrayC2 Orange/BrownC1 Orange/Green
D6 White/RedD5 White/BlueD4 White/GreenD3 Yellow/RedD2 Yellow/BlueD1 Yellow/Green
White Out E1Orange Out E2
Red In E3Black In E4Pink In/Out E5
Yellow Out E6
This guide may change without notice. See www.fortin.ca for latest version.Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
WIRING CONNECTION | GUIDE DE BRANCHEMENTS
CUT LOOP FOR AUTOMATIC TRANSMISSION MODE.COUPEZ LA BOUCLE POUR LE MODE TRANSMISSION AUTOMATIQUE.
CAN HIGHCAN LOW
(+)Starter(+)Ignition(-)Ground
(+)12V
(+)Ignition2
(-) Start/Stop
(-)Hood
(-)Trunk Release
(~) IMI
(-)Horn
(-)Unlock(-)Lock
A2A3A4A5A6A7A8A9
A10A11A12A13A14A15A16A17A18A19A20
E1E2E3
E4E5E6
C5C4C3C2C1
D6D5D4D3D2D1
A1
D2
D4D5D6
C1C2
C5
E2
A20
A18A17
A14
A12A11
A9A8
A6A5A4
A1
SIEN
NA
HYB
.
A10/D3
D1
A16
A19
E6 E1 E5 A2 A3 C3 C4 E4 E3
FuseFusible
(~) IMO
(~) IMI
(~) IMI
HOOD PINMANDATORY CONTACT CAPOTOBLIGATOIRE
A13 A7
20
19
18
17
16
15
14
40
38
37
36
35
34
33
32
31
30
29
28
27
26
25
24
23
22
21
13
12
11
10
9
8
7
6
5
3
2
1
54
53
52
51
50
49
48
47
46
45
44
43
42
41
4
39
2021:RedRouge
2022:BlackNoir
Lt.GreenVert Pâle
PurpleMauve
GreenVert
PurpleMauve
WhiteBlanc
BlueBleu
Lt.GreenVert Pâle
Back viewBlack 12-pin
connectorAt PTS Switch
Vue de dosConnecteur
Noir 12-pins
Au bouton PTS
White/BlackBlanc/Noir
(+)12 V(-)GROUND
Back view - 54-Pin Black Connector
ECU,Driver’s
sideVue de dos - Connecteur 54-Pins Noir ECU, Côté conducteur
1
10
2345
678919
2021
17 16 1415 13 1218 11
27 25 24 23 2230 29 28 26
Front Black 30-pin Connector
ECU,Driver’s sideVue de dosConnecteurNoir de 30
pinsECU, Côté
conducteur
Back view White 27-pin Connector
ECU,Driver’s sideVue de dosConnecteurBlanc de 27
pinsECU, Côté conducteur
Back view White 23-pin Connector
ECU,Driver’s
sideVue de dosConnecteurBlanc de 23 pins. ECU,
Côté conducteur
Back view - White 25-pin ConnectorJonction block,
left of drivers side ECU
Vue de dosConnecteur
Blanc de 25 pins. Block de jonction,
à gauche de l’ECU, côté conducteur
14
61 2 3 4 54 7 8
9 10 11 12 13 15 16
Front ViewWhite 16-pin
OBDII Connector
Vue de FaceConnecteur OBDII Blancde 16 pins
(~)IMO (~)CAN HIGH
(~)CAN LOW(~)IMI (-)
UNLOCK(-) LOCK
(+)STARTER
16
C
CU
T
1
10
234
6789
1819
17 16 1415 13 12 511
23 22 21 2027 26 2425
RedRouge
(-) TRUNK
D A B
10
4 5 6 7 8
9
19 20 21
171614 151312
18
11
2322
1 2 3
BlackNoir
(+)IGNITION 2
56 6 3 2 1
91112 10 78
BlueBleu
PurpleMauve
BlackNoir
(-)START/STOP2
(-)START/STOP1
(-)START/STOP3
1AMPDiode
1AMPDiode
1AMPDiode
10
23456789
192021
16 1415 13 12
18
1125
1
1724 23 22
WhiteBlanc
(+)IGNITION 1
CD
B
A
5
5
GreenVert
21 3 4 5 6
108
7
9 1211 1413
(-)HORN
Steering Column. At
switch, Black 14-Pin connector.
Colonne de direction.
Au commuta-
teur, Connecteur Noir 14-pins.
Page 4 / 8
2
1
3
4
5
The BLUE LED will flash rapidly.
La DEL BLEU clignotera rapidement.
The BLUE LED will turn ON solide.
La DEL BLEU s'allume.
Wait, Attendez,
Appuyez sur le bouton de démarrage deux fois pour allumer l'ignition.
Press the Push-to-Start button twice, to turn the ignition ON.
The BLUE LED will turn OFF. The RED LED will turn ON.
La DEL BLEU s'éteint. La DEL ROUGE s'allume.
CONTINUED NEXT PAGE | CONTINUEZ À LA PAGE SUIVANTE
Insert the required remaining connectors.
Insérez les connecteurs requis restants.
x2PRESS
START
x1PRESS
HOLDRELEASE
START
Press the Push-to-Start button until the engine start.
Appuyez sur le bouton démarrage jusqu'à se que le moteur démarre.
Press the foot-brake pedal. Appuyez la pédale de frein.
Release the foot-brake pedal. Relâchez la pédale de frein.
x1HOLD
between BLUE, RED,YELLOW& BLUE/RED flashes.
un clignotement BLEU,ROUGE, JAUNE &
Les DELS alterneront entre The LEDs will alternate
BLEU/ROUGE
A
E
FG
J
I
H
BC
D
Press and hold the programming button: Connect the 6-PIN Main harness (White connector).
Appuyez et maintenir le bouton de programmation enfoncé: Branchez le harnais Principal à 6-Pins (connecteur Blanc)
If the BLUE LED is not ON solid disconnect the 6-Pin Main connector and go back to step 1.
Si la DEL BLEUE n'est pas allumée débranchez le connecteur Principal à 6-broches et retournez au début de l'étape 1.
RELEASE
A
E
FG
J
I
HBC
D
ON BLUE BLEU
A
E
FG
J
I
H BC
D
Release the programming button when the LED is BLUE.
Relâchez le bouton de programmation quand la DEL est BLEU.
A
E
FG
J I
HBC
D
A
E
FG
J I
H B
CD
A
E
FG
J I
HB C
D
A
E
FG
J
I
HB C
D
A EFGJ I H B C D
A EFGJ I H B C D
WAIT
ON
ON
IGNITION OFF IGNITION ON
FLASHRAPIDLY
STARTIGNI.
ON OFF
ON
This guide may change without notice. See www.fortin.ca for latest version.Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
DCRYPTOR PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION AVEC DCRYPTOR
Parts required (not included) Pièces requises (non incluses)
1x FLASH LINK UPDATER,
1x FLASH LINK MANAGER
1x FLASH LINK MOBILE1x FLASH LINK MOBILE APP
SOFTWARE | PROGRAMME Smartphone Android or iOS with Internet connection (Internet provider charges may apply)Téléphone Intelligent Android ou iOS avec connection Internet (des frais du fournisseur Internet peuvent s’appliquer)
OROU
Microsoft Windows Computer with Internet connectionOrdinateur Microsoft Windows avec connection Internet1x 1x
BEFORE PROGRAMMING SET THE UNIT OPTIONS AND SAVE. | AVANT LA PROGRAMMATION CONFIGURER LES OPTIONS DE L'UNITÉ ET SAUVEGARDER.
5-Prog.1-17-SPECIAL1_PTS
Page 5 / 8
Wait, Attendez,
The RED LED will turn OFF. The YELLOW LED will turn ON.
La DEL ROUGE s'éteint. La DEL JAUNE s'allume.
The RED and YELLOW LEDswill alternate.
La DEL ROUGE et JAUNEalternent.
OFFx1PRESS
OFFx1PRESS
Press the Push-to-Start button once to turn off the engine.
Appuyez sur le bouton démarrage une fois pour éteindre le moteur.
Press the Push-to-Start button once to turn off the engine.
Appuyez sur le bouton démarrage une fois pour éteindre le moteur.
7
8
6
Press the Push-to-Start button until the engine start.
Appuyez sur le bouton démarrage jusqu'à se que le moteur démarre.
Press the foot-brake pedal. Appuyez la pédale de frein.
Release the foot-brake pedal. Relâchez la pédale de frein.
START
x1PRESS
HOLDRELEASE
START
A EFGJ I H B C D
WAIT
STARTOFF
ON OFFON
FLASH RAPIDLY
A
E
FG
J
I HB
C D
A
E
FG
J
I H B
C
D
A
E
FG
J I
H
B
C
D A
E
FG
J I
HB
C
D A EFG
J
I
H B
C D
A EFGJ I H B
C D
A
E
FG
J I
HB
C
D
A
E
F
G
J
I H
BC
D
A
E
FG
J
I H
B C
D
A
E
FG
J
I
H
B
C D
Disconnect all connectors and after the 6-Pin (Main-Harness) or the 4-Pin Data-link connector.
Débranchez tous les connecteurs et ensuite le connecteur 6-pins (Connecteur principal) ou le connecteur 4-pins (Data-Link).
REMOTE STARTER / ALARM VERIFICATION PROCEDURE | PROCÉDURE DE VÉRIFICATION DU DÉMARREUR À DISTANCE / ALARMEThe module is now programmed.
Le module est programmé. Test the remote starter. Remote start the vehicle.Testez le démarreur à distance. Démarrez le véhicule à distance.
AFTER DCRYPTOR PROGRAMMING COMPLETEDGo back to the vehicle and reconnect the 6-Pin (Main-Harness) or the 4-pins (Data-Link) connector and after all the remaining connector.
APRÈS LA PROCÉDURE DE PROGRAMMATION DCRYPTOR COMPLETÉE : retournez au véhicule etrebranchez le connecteur 6-pins (Connecteur principal) ou le 4-pins (Data-Link) et après tous les connecteurs.
FLASH LINK UPDATER*
FLASH LINK MOBILE*
FLASH LINK MANAGER*SOFTWARE | PROGRAMME
A EFGJ I H B C D
A EFGJ I H B C D
Microsoft Windows Computer with Internet connection*
Ordinateur Microsoft Windows avec connection Internet*
*Pièces requises (non incluses)
Use the tool: FLASH LINK UPDATER or FLASH LINK MOBILEto visit the DCryptor menu.
Utilisez l'outil: FLASH LINK UPDATER ou FLASH LINK MOBILEpour visiter le menu DCryptor.
*Parts required (not included)
VEHICLE'S OBDII CONNECTOR
CONNECTEUR OBDII DU VÉHICULE
OROU
Smartphone* (Internet provider chargesmay apply)Téléphone Intelligent* (des frais du fournisseurInternet peuvent s’appliquer)
9
10
11
This guide may change without notice. See www.fortin.ca for latest version.Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
KEY BYPASS PROGRAMMING PROCEDURE 2/2 | PROCÉDURE DE PROGRAMMATION CONTOURNEMENT DE CLÉ 2/2
5-Prog.1-17-SPECIAL2_PTS
Page 6 / 8
Remote start the vehicle.
Démarrez à distance.
All doors must be closed.
Toutes les portes doivent être fermées
Press the brake pedal.The vehicle can now be
put in to gear and driven.
If the Smart-Key is not detected the vehicle will shut down.
Appuyez sur la pédale de frein.
Vous êtes maintenant prêt à embrayer et prendre la route.
Si la clé intelligente n'est pas détectées le véhicule s'éteindra.
ONx1PRESS
DO NOT PRESS THE BRAKE PEDAL.
Press and release the Push-to-Start
button once.
NE PAS APPUYER LA PÉDALE DE FREIN.
Appuyez et relâchez une fois le bouton
démarrage (Push-to-Start.
Start
Enter the vehicle with the SMART-KEY.
Entrez dans le véhicule avec la clé intelligente (SMART-Key) sur vous
UNLOCK
Unlock the doors with either:
• The OEM remote • The remote-starter
remote• Or the proximity remote
Déverrouillez les portes avec soit:
• la télécommande d'origine
• la télécomande du démarreur à distance
• ou la télécommande de proximté.
This guide may change without notice. See www.fortin.ca for latest version.Ce guide peut faire l’objet de changement sans préavis. Voir www.fortin.ca pour la récente version.
REMOTE STARTER PROGRAMMING PROCEDURE | PROCÉDURE DE PROGRAMMATION DU DÉMARREUR À DISTANCE
REFER TO THE QUICK INSTALL GUIDE INCLUDED WITH THE MODULE FOR THE REMOTE STARTER PROGRAMMING.
RÉFÉREZ-VOUS AU GUIDE D’INSTALLATION RAPIDE INCLUS AVEC LE MODULE POUR LA PROGRAMMATION DU DÉMARREUR À DISTANCE.
REMOTE STARTER FUNCTIONALITY | FONCTIONNALITÉS DU DÉMARREUR À DISTANCE
Page 7 / 8
FIN-DISCLAIMER_QR
Module label | Étiquette sur le module
Notice: Updated Firmware and Installation GuidesUpdated fi rmware and installation guides are posted on our web site on a regular basis. We recommend that you update this module to the latest fi rmware and download the latest installation guide(s) prior to the installation of this product.
Notice: Mise à jour microprogramme et Guides d’installationsDes mises à jour du Firmware (microprogramme) et des guides d’installation sont mis en ligne régulièrement. Vérifi ez que vous avez bien la dernière version logiciel et le dernier guide d’installation avant l’installation de ce produit.
WARNINGThe information on this sheet is provided on an (as is) basis with no representation or warranty of accuracy whatsoever. It is the sole responsibility of the installer to check and verify any circuit before connecting to it. Only a computer safe logic probe or digital multimeter should be used. FORTIN ELECTRONIC SYSTEMS assumes absolutely no liability or responsibility whatsoever pertaining to the accuracy or currency of the information supplied. The installation in every case is the sole responsibility of the installer performing the work and FORTIN ELECTRONIC SYSTEMS assumes no liability or responsibility whatsoever resulting from any type of installation, whether performed properly, improperly or any other way. Neither the manufacturer or distributor of this module is responsible of damages of any kind indirectly or directly caused by this module, except for the replacement of this module in case of manufacturing defects. This module must be installed by qualifi ed technician. The information supplied is a guide only. This instruction guide may change without notice. Visit www.fortinbypass.com to get the latest version.
MISE EN GARDE L’information de ce guide est fournie sur la base de représentation (telle quelle) sans aucune garantie de précision et d’exactitude. Il est de la seule responsabilité de l’installateur de vérifi er tous les fi ls et circuits avant d’effectuer les connexions. Seuls une sonde logique ou un multimètre digital doivent être utilisés. FORTIN SYSTÈMES ÉLECTRONIQUES n’assume aucune responsabilité de l’exactitude de l’information fournie. L’installation (dans chaque cas) est la responsabilité de l’installateur effectuant le travail. FORTIN SYSTÈMES ÉLECTRONIQUES n’assume aucune responsabilité suite à l’installation, que celle-ci soit bonne, mauvaise ou de n’importe autre type. Ni le manufacturier, ni le distributeur ne se considèrent responsables des dommages causés ou ayant pu être causés, indirectement ou directement, par ce module, excepté le remplacement de ce module en cas de défectuosité de fabrication. Ce module doit être installé par un technicien qualifi é. L’information fournie dans ce guide est une suggestion. Ce guide d’instruction peut faire l’objet de changement sans préavis. Consultez le www.fortinbypass.com pour voir la plus récente version.
Copyright © 2006-2019, FORTIN AUTO RADIO INC ALL RIGHTS RESERVED PATENT PENDING
TECH SUPPORTTél: 514-255-HELP (4357) 1-877-336-7797
ADDENDUM GUIDEWEB UPDATE | MISE À JOUR INTERNET
www.fortinbypass.com
ONE
MODEL: EVO-ONEDATE:02/2019FORTIN.CA
SN: 000000 00000
MADE IN CANADA© 2018 ALL RIGHTS RESERVED
Page 8 / 8