Lam Heng Group of Companies is a one-stop engineering service provider for

the heavy industries. Our workshop and on-site equipment with full range of

machining facilities for big diameter turning, long shaft turning, heavy structure &

fixture milling, horizontal boring, gear hobbing and spline cutting.

34 Kian Teck Drive Singapore 628857Tel: (65) 6746 6860 Fax: (65) 6746 74201 Jalan Samulun Singapore 629119 Tel: (65) 6261 2308 Fax: (65) 6261 2308Email: lamheng@singnet.com.sg Website: www.lamheng.com

Hydraulic Equipment Repair

On-Site Machining Precision WorkshopMachining and Fabrication

Equipment Erection and Installation Machinery Outfitting and Repair

Lam Heng_FPFC.80097940.ai 1 21/3/13 5:05 PMLam Heng_FPFC.80097940.ai 1 21/3/13 5:05 PM

Singapore Shiprepairing, Shipbuilding & Offshore Industries Directory 2013/2014

135

Lam Heng Marine Pte Ltd34 Kian Teck Drive, Singapore 628857Tel (65) 6746 6860 Fax (65) 6746 74201, Jalan Samulun, Singapore 629119Tel (65) 6261 2308 Fax (65) 6261 2308Email lamheng@singnet.com.sg Website www.lamheng.com

BackgroundLam Heng Group of Companies has been in the marine and offshore engineering business for more than 40 years and we have been growing steadily since incorporation.

We are a one-stop engineering service provider with complete and comprehensive machining, fabricating and servicing workshop facilities.

In our passion to provide sustainability and to enhance customer satisfaction, our spectrum of work has expanded to include on-site machining, installing and hooking-up services for critical equipment and machinery, hydraulic and instrumental control system integration of the marine and offshore sector.

The synergy created within our group of companies enables us to provide more value-added services, such as turnkey project management, specialist & customised machining and fabricating, plantpreventive and shut down maintenance.

Our Business Expansion ApproachUsing Singapore as an integration platform forbridging the Western and Eastern strengths in terms of advance technologies and lower business cost.

Lam Heng Group of Companies:• Lam Heng Marine Pte Ltd• Lam Heng Technologies Pte Ltd• Chay Associates Construction & Engineering Pte Ltd• Lam Heng Engineering Works• D-MIX Hydraulic And Automation Pte Ltd• King Blasting & Coating Pte Ltd• Lam Heng Marine Europe B.V. (Netherland)• Lam Heng Marine (Nantong) Pte Ltd (China)

Our VisionTo be a strategic partner to our customers in the marine, oil & gas and plant engineering industry by providing and delivering pragmatic engineering solutions for on-time completion with competitive price and safety commitment.

Our MissionCustomers: We are committed to provide total quality service with respect to product and service quality, customer support and value-added service.Employees: We are committed to focus on our peoples’ skills and career development to meet the challenges of technological demands in the knowledge-based economy.Suppliers: We are committed to collaborate and integrate with our suppliers as our partners inproviding quality-engineering services by maintaining the highest level of integrity, direct and effective communication.Shareholders: We are committed to generate economic value to our shareholders through organic and sustainable growth for their prudent investment.

Our Shared Value: The “4-T” cultureTechnology: Passion in technological evolution inspires innovation.Training: Passion in continuous skill development inspires life-long learning.Teamwork: Passion in collective strength inspires synergy.Trust: Passion in mutual respect inspires shared value.

Our Areas of SpecialisationWorkshop Machining and Fabricating Services• Complete range of machining and fabricating workshop facilities for marine and offshore oil & gas industries, heavy weight and large size components and structures in turning, milling, boring, slotting, gear-cutting, plasma-cutting, plate and section bending and rolling.

On-Site Machining & Services• Complete in-situ machining solutions provider in line-boring, flange facing, track milling and machinery skid mounting levelling, with 3D laser alignment check.• Competent equipment installer and hook-up contractor for machinery and equipment used in marine, offshore oil & gas exploration and development project.• Competent fabricator, repairer and retrofitter for marine and offshore cranes, winches and mechanical handling equipments and fixtures.• Specialist in hydraulic, pneumatic and electrical control system for marine automation and offshore processing skid module project.

Blasting & Preventive Coating Services• Competent applicator of corrosion prevention coating for plates, profiles and structural components, specially within short notice requirement by the marine and offshore market.

Marine Hardware Supply Services Marine Equipment Supply• Marine Elevator• Level Gauging System• Deck Machinery & Winch and Windlass• Deck cranes• Rudder & Rudder Stock• Propeller and Shaft• Marine Valves and Fittings Marine Hardware Supply• High grade Bolt, Nut, and Fastener• Ship Plate and Structure Profiles• Bearing and Seals

Hydraulic Component and Fitting Supply• Hydraulic Pump- Rotary Pump – 180 bar ~ 300 bar- Gear Pump – 200 bar- Piston Pump – up to 650 bar- Screw Pump – high flow ~ low pressure (max 100 bar)- Bent Axis Pump – 350 bar ~ 420 bar

• Hydraulic Motor- Gear & Vane motor- Gerorator motor- Axial Plunger motor- Radial Piston Motor

• Hydraulic Valve- Pressure Hydraulic Valve- Flow Control Hydraulic Valve- Direction Hydraulic Valve (Directional Control Valve)

Our WorkshopCapabilities & FacilitiesA. Machining workshopB. Gear hobbing workshopC. Steel works & fabrication workshopD. Blasting & Painting WorkshopE. Covered storage and warehouse

(A) Machining Workshop(i) Centre lathe for large diameter: ø2400mm x c/c distance 3000mm(ii) Centre lathe for long shaft: ø1000mm x c/c distance 12,000mm(iii) Facing machine for flange or ring: ø5000mm x Ht. 1000mm(iv) Milling of up to 8000mm one-time travel length x width 1000mm x 30 tons load with table length 10,000mm, maximum length of 20,000mm

(B) Gear Hobbing Workshop (i) Gear hobbing machine for spur gear, helical gear, and worm gear, Ø1500mm x Module 16 pitch(ii) Gear milling machine for spur gear, Ø3500mm x Module 30 pitch(iii) Rack and pinion milling, up to 6000mm length(iv) External splines milling, ø600mm x length 8000mm(v) Internal splines slotting machine, stroke 400mm x length 3000mm(vi) Internal keyway milling machine, minimum ID ø180mm x Lg 1000mm

(C) Steel Works & Fabrication Workshop(i) Plate rolling machine for thickness 50mm x length 2500mm(ii) Plate shearing machine for thickness 9mm x length 3000mm(iii) Press brake machine, capacity 150 tons x length 3700mm(iv) Iron-worker for hole punching and section cutting, capacity 80 tons(v) Section bender for angle bar and pipe rolling, capacity 150mm x 150mm x 12mm angle bar and DN8” Sch40 x Ø1500mm(vi) Pattern development and bending services for cone, transition piece, discharge chute and exhaust & ventilation “Y” duct fabrication

(D) Blasting & Painting Workshop(i) Covered Plant Area of 8000sqft(ii) Blasting Chamber size: Lg 40ft x Wd 8ft(iii) Wide range of sophisticated inspection equipment to meet stringent technical and quality requirements in marine & offshores’ environment.

(E) Covered Storage and Warehouse Facilities (i) Storage area of 10,000 sq ft, with 7 tons forklift facilities, ideal for transit storage of critical spare parts and Project OFE items.

Supp

orti

ng In

dust

ries

Lam Heng.80097940.indd 1Lam Heng.80097940.indd 1 3/4/13 11:05 AM3/4/13 11:05 AM