(341570861) schedule b (without rate)

B

C

Item Number (upto 200 characters)

1

2

3

4

5

6

7

8

9

Columns Below Plinth 27

Plinth Beam 46

Item Description Quantity(only figures)

Excavation for foundation upto 1.5 mt. depth including sorting out andstacking of unuseful materials and disposing off the excavated stuff upto 50Meter lead. (A) Loose or soft soil

748.00

Excavation for foundation upto 1.5 mt. to 3.0 meter depth including sorting outand stacking of unuseful materials and disposing off the excavated stuff upto50 Meter lead. (A) Loose or soft soil

499.00

Carring out plinth treatment to post construction / existing structure byspraying chemical solution for termite control treatment including labour and material consistment with I.S.I specification.

787.00

Filling in foundation and plinth with murrum or selected soil in layers of 20 cm.thickness including watering, ramming and consolidating etc. complete

632.00

Filling available excavated earth (excluding rock) in trenches plinth, sides offoundations etc. in layers not exceeding 20 cm in depth consolidating each demo sited layer by ramming and watering.

882.00

Providing & laying plain cement concrete 1:4:8 (1 cement : 4 coarse sand : 8stone aggregate 20mm nominal size) and curing complete including cost of form work in(A) foundation and plinth

75.00

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand :4- graded stone aggregates including cost of formwork in20 mm nominal size) and curing complete(A) foundation and plinth

115.00

Providing and laying TMT bar reinforcement for R.C.C. work includingbending, binding,and placing in position complete for 2nd and 3rd floor SlabLevel Up to 13.00 meter Height.

48692.00

Providing & laying Controlled cement concrete cement concrete without flyash by READY MIXED CONCRETE M250 with all lead and lift from plant site including all other taxes octroi, transportation, pumping, pouring, curing of concrete etc. complete Including cost of form work and excluding cost reinforcement for R.C.C. WORK (Minimum cement level as per IS 456-2000 shall be adopted for concrete grade)Footing and Foundation

217.00

CUM 0 0

CUM 0 0

UNIT (upto 50 characters)Tender Rate( Upto 2

Decimals )

Amount( Upto 2

Decimals )

Cum 0.00 0.00

Cum 0.00 0.00

sqm 0.00 0.00

Cum 0.00 0.00

Cum 0.00 0.00

Cum 0.00 0.00

Cum 0.00 0.00

Kg 0.00 0.00

CUM 0.00 0.00

B

C

D

E

F


10

11

12

13

Coping Beam GF to second floor 16

Lintel Beam 16

( j and k) Slab and Chhajja 124

Beam of Slab 63

Staircase Beam and Bedding & landing 4


Providing & laying Controlled cement concrete cement concrete without flyash by READY MIXED CONCRETE M200 with all lead and lift from plant site including all other taxes octroi, transportation, pumping, pouring, curing of concrete etc. complete Including cost of form work and excluding cost reinforcement for R.C.C. WORK (Minimum cement level as per IS 456-2000 shall be adopted for concrete grade)Columns Above Plinth to second Floor

44.82

Brick work using common burnt clay conventional building bricks havingcrushing strength not less than 35 kg/Sq. Cm. in foundation and plinth in cement mortar 1:6(I cement : 6 fine sand)(B) Conventional

78.00

Brick work using common burnt clay building brick having crushing strengthnot less than 35 kg/sq. cm. in Super Structure in cement mortar 1:6 (1Cement :6 fine sand) For Ground Floor to Second Floor(B) Conventional

285.00

Half brick masonry in common brunt clay building bricks having crushingstrength not less than 35 kg/Sq.cm in cement mortar 1:4 (1 cement : 4 coarse sand) For Ground Floor to Second Floor(a) Conventional

26.00

CUM 0 0

CUM 0 0

CUM 0 0

CUM 0 0

CUM 0 0


Decimals )

Amount( Upto 2

Decimals )

CUM 0.00 0.00

CUM 0.00 0.00

CUM 0.00 0.00

sqm 0.00 0.00


14

15

16


Providing and fixing false ceiling with eco-friendly light weight Calcium Silicatetiles of Spintone/Cosmos surface textured or equivalent of size 595 x 595 mm having 15 mm thick densified microlook edge and 100% humidity resistance, non-combustible as per BS 476 Part IV and thermal conductivity ≤ 0.043w/m KC and NRC 0.50 placed in true horizontal level suspended grid of size 600 x600 mm made from hot dipped GI steel sections on Silhouette profile, rotary stitched double webbed white with 6 mm reveal profile (white/black), where in main T runner of size 42 mm x 15mm and 0.40 thick 1200 mm center to center and cross T of size 42 mm x 15 mm and 0.40 mm thick, 1200 mm long spaced between main tee at 600 mm center to center and secondary cross T of size 42 mm x 15 mm x 0.40 thick of length 600 mm to be inter locked at middle of the first cross T in each panel to form grids of 600 mm x 600 mm and resting on peripherry wall with profile wall section 19 mm(7+7) x 19 mm x0.40 mm thickness and laying false ceiling for services like diffusers grills including cutting,making opening for light fitting, fixtures, smoke detectors etc. wherever required, main tee runner to be suspended from ceiling using M 6 dash fasteners 40mm long, 6mm G.I. fully threaded rods with galvnised steelL-cleat level adjusters of size 80x25x2.0mm spaced at 1200 mm center to center along main tee all complete at all heights as per specfications, drawings and as per direction of Engineer-in-charge

45.10

P/A 15 mm thick cement plaster in single coat on fair/ rough side of brick orconcrete wall for interior/ exterior plastering For Ground Floor to Second Floor finished even and smooth in C.M. 1:4 (1 cement : 4 sand) including finishing with floating coat of neat cement slurry including necessary curing, scaffolding in true line and level etc. complete As per Architect instructions and drawing or as directed by engineer in charge.

1735.00

20mm thick sand faced cement plaster on Exterior walls upto height 13meters above ground level consisting of 12 mm thick backing coat of cm 1:3 (1 cement : 3 sand) and 8 mm thick finishing coat of cm 1:1 ( 1 Cement :1sand) with dewatering of sand granuals by sponge block or sparying sand mixture with hand operated machine as directed by Engineer in charge etc complete

1122.00


Decimals )

Amount( Upto 2

Decimals )

Sqmt 0.00 0.00

SqM 0.00 0.00

Sq.M 0.00 0.00


17

18

19

20

21


Providing and laying Granite stone slab flooring, skirting, trade and Riser ofstair case over 20 mm. (average thick base of cement mortar 1:6 (1 cement :6 coarse sand ) of L.M. 1:1.5 and laid over and jointed with grey cement slurry including rubbing and polishing complete. 18 mm Thick (Basic Rate for Granit stone is cosider 2000 per sqmt)

687.00

Making Full round Edge of Granite Tread by grinding and Polished andmaking smooth etc complete as per directed by engineer Incharge

366.00

Providing and fixing 0.75 mt height and 0.60 mt wide sandwich type platformincluding supplying and fixing mirror polished black telephonic colour granite stone 18-20 mm thick stone slab not less than 2.0mt length on top and side posiition and vertical strip at front over 25-30 mm thick polished double kotah stone vertical support system for platform fixing one side polished 30-35mm thick kota stone slab not less than 1.20mt length for top granite fixing with 1:4 cement mortar and Fevicol SH adhesive and finishing including Providing, Cutting and only fixing of kitchen/Laboratory sink (extra supplied) at required position etc complete

21.00

Providing and fixing of Heavy Duty fully vitirifed floor tiles of first quality ofSomanI, VARMORA or OREVA brand is used in floor, having thickness of7.2 mm in desired colour and specified size 60 cm X 60 cm mat or Antiskid finish as approved by engineer-in-charge scratch hardness minimum 7 on Moh's scale with a density of 2.2 to 2.3 and bonding strength of 250 kg/sqcm also chemical resistance should be meet ASTM & DIN standards as per manufacturer's specifications. The tile shall be fixed in CM 1:4 (1 Cement : 4Sand) joint should be done with approved grouting, materials etc. complete. Including 0.10mt hight skirting

789.00

Providing & fixing wall dado of first quality Glazed/ matt finished tiles of(VARMORA, SOMANI, KAJARIA, NITCO or JOHNSON)standard brand of30x 45 cm size,approved colour and approved pattern or design set, in 3mm tile fixing adhesive slurry ( Laticrete or Asian Power Grace )over a min 12 mm thick 1:4 single coat cement plaster ( Mala plaster) with proper line andlevel. Joints shall be filled with self matching colour grout , curing and cleaning with mild oxalic acid etc. complete as directed by Engineer-in-charge. (Basic Rate of Glazed tiles shall not be less than Rs.500/Sqmt on site)

114.00

0


Decimals )

Amount( Upto 2

Decimals )

Sq.M 0.00 0.00

Rmt 0.00

SqM 0.00 0.00

SqM 0.00 0.00

SqM 0.00 0.00


22

23

24

25


Providing and laying Right Edges (Square cut) rough surface non skidCeramic tiles in size 30 cm X 30 cm 8 mm.thick of approved Brand in toilet flooring laid on a Bed of 50 mm. Thick cement mortar 1:3 (1 cement : 3 coarse sand) pointing in white/colour chemical grout including curing,rubbing, cleaning etc. comp. as per instructions of EIC. (Ceramic non skid Tiles Basic Rate Rs.450/Sqmt on site)

29.00

Provinding and fxing M.S. Grill of given design pattern to masonry and makingfinish with plaster etc. with M.S.flats,angles, solid or hollow bars , prewelded wire mesh at required spacings and frame as per detail design drawings including applying Priming Coat of red oxide paint and two coat of standrd make oil paint colour etc complete .(b) Plain grill

1167.00

Providing and fixing EX-CEL or Equivalent make Wood grain colour , waterproof Solid Section Door Frame made up of wood partical powder and PolyVinyl Chloride PVC rasins composite WPC high pressure density 0.78 to 0.90Kg/m3 molded section single rebated door frames of 127 X 50.8 mm size frame section cut to opening size with fixing of toung and groove joints with Fevicol SH adhesive fixed joints for vertical and horizontal memebers including 100mm long SS screw as frame holdfast fixed in a wall masonary or RCC opening sides including molding pattis of same material etc. comp. As per Architect instructions and drawing or as directed by engineer in charge.

74.00

Providing and fixing EX-CEL or Equivalent make White or coloured waterproof Solid PVC Sheet made up of Poly Vinyl Chloride PVC resins solid high pressure density 0.55 to 0.70 Kg/m3 molded sheet of 35 mm thickness as per required size door shutter in single sheet panel in cut to size with fixing of all standard make 304 Stain less Steel Hardware as given list below with SS Screws and Fevicol SH adhesive fixed in frame ( Separate tender item) etc. comp. As per Architect instructions and drawing or as directed by engineer in charge.Hardware : SS 304 Hinges size 127x76x3.4mm, Door Handle Lever handle, Lock size 55mm night latch lock, Tower Bolt Round Bar 12mmØ, Door Stopper 2 size 44x142mm foot operated door stop, D Type Pull Handle D size 150mm Rod , Door Closer Medium Duty Door Closer for 45/65 Kg Capacity

12.00


Decimals )

Amount( Upto 2

Decimals )

SqM 0.00 0.00

Kg 0.00 0.00

Rmt 0.00 0.00

smt 0.00 0.00


26

27


Providing & fixing in position standard extruded Aluminum101.6X38.101.50mmTHK/1.15Kg/MT and 36X24X0.95mm0.35KG/MT Weight section frame section with 50.8X25.4X1.20mm 0.60kg/Mt weight section for shutter all window section with colour anodized openable shutters with SS hinges with 5mm tint glasss in the center as per design fixed in rubber gasket and Glazing Clips if necessary around the glass allover including providing heavy SS handle with lock, wind stoper bracket, tower bolts. Approved Quality as directed By Enginner Incharge including all required materials labours and equipments as per detailed drwg. as directed.

56.00

Supply and fixing of Glazed STRUCTURAL GLAZING on facade usingexterior face of ASAI make high performance heat reflective glass of 6 mm thick (with light transmission VLT 34%, Solar factor SF .22 and u Value 1.7 w/m2/0 K) to be installed on curtain wall system using extruded aluminium section of Hindalco / Jindal / Mahavir or equivalent made of virgin aluminium . The section should be curtain wall section of 100 x 50 mm having thickness not less than 3 mm powder coated in 40 microns in desired colour of architect having pressure plate recommended by glass manufacturer and necessary EPDM gaskets, silicon sealants . including top hung windows as per architect dwg. The entire system shall be supported on backup steel structure made of RHS AND SHS as per structure drawing and duly fitted to RCC Columns and beams. The aluminium structure will be attached to MS structure with necessary s.s but bolts and all s .s. hardwares complete job with all material and labour. The cost of aluminium section and glass work shall be paid on sqMtr basis whereas backup steel structure shall be paid by actual weight of steel used. Scope of work includes complete work with all T & P labour was rages cleaning scaffolding complete as per directions of Architect incharge. Shop drawing to be submitted by vendor as per site measurements to be approved by architect.The shade of the solar glass to be approved by Project Architect.

54.00


Decimals )

Amount( Upto 2

Decimals )

SqM 0.00 0.00

SqM 0.00 0.00


28

29

30

31


Providing & fixing in position partly fixed and partly openable standardextruded Aluminium door with color anodized hollow section frame ofapproved shade & pivoted double shutter fabricated from alluminium standard section for outer frame size 101 mm x 44.5 mm X 2 mm Thick (of app. Wt.2.60 kg / Rmt) and door styles and toprial of alluminium section size 47.5mm x 44.5 mm X 2.00 mm Thick (of app. Wt. 1.25 kg/ Rmt) Bottom rail & lockrail for door of size 114mm x 44.5mm X 2 mm Thick (of app. Wt 1.75 Kg/Rmt) and providing rubber gasket and glazing chips around the glass allover including providing heavy handle, heavy lock, bracket, stoppers.Floor Spring,Aldrop (Color anodised) 5 mm th. transparent float glass of copper tint (Structural Glass) fixed with rubber gasket and 19 x 17 mm size Glasing Clip same in Bottom Portion with providing 9 mm thick decorative water proof Both side prelaminataed pressed wood based board with fixing Glasing clips19 X 17 mm including all required materials labours and equipments as per detailed drwg. as directed.

20.00

Providing & fixing in position standard extruded Aluminum Ventilator withlouvers with colour anodized section for outer frame size 92.00 X 29.50 X1.10 mm or With Fixed Glass louver of 10mm glass of 4mm thick opac bajari glass at 45° fixed in sliding channel of same size fixed with frame section as per directed of approved including all required materials labours and equipments as per detailed drwg. as directed.

3.00

Finishing wall with weather proof exterior emulsion paint on wall surface (twocoats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complet

1122.00

Wall painting (two coats) with plastic emulsion paint of approved brand andmanufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. with applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.up to 10 mt height including cleaning and washing of all surfaces of window and door frame including shutters and floors as per satisfaction of EIC. (for wall area only)

1735.00


Decimals )

Amount( Upto 2

Decimals )

SqM 0.00 0.00

SqM 0.00 0.00

SqM 0.00 0.00

SqM 0.00 0.00


32

33

34

35

36

37


Distempering (Two coats) with oil bound washable distemper of approvedbrand (ASIAN Tracture Emulsion Eqv.) and manufacture & required shade on wall and or Ceilling surface to give an even shade , over and including putty and priming coat with a distemper primer of approved brand & manufacturer after Hand Scraper etc thoroughly brushing the surface to give an even shade free from mortar droppings and other foreign matter and also including preparing the surface even and smooth. (for ceiling and beam drop)

46.00

Painting two coats (including priming coat ) on new steel & other metalsurfaces with enamel paint brushing interior to give an even shade including cleaning the surface of all dirt , dust & other foreign matter. up to 10 mt hight including cleaning and washing of all surfaces of window and door frame including shutters and floors as per satisfaction of EIC.

97.00

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar1:1 including neat cement finishing, watering etc. complete.

197.00

Forming groove of uniform size from 12x12mm and upto 25x15mm inplastered surface as per approved pattern using wooden battens, nailed tothe under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. metre 13.30

591.00

Providng and fixng 90 C.M. high MS railing for balconies, terrace parpets,ramp etc. with necessary hold fast insurt in flooror in masonry and fill with concrete(1:2:4) and smooth with plaster madeup of MS hollow 50x50x2.9mm pipe of weight 4.12Kg/mt on top and 25x25x2mm MS Square Hollow pipe of1.36Kg/mt weight Vertical or horozontal pipes as per Architects detail design drawings pattern including cutting, bending, welding, fixing and applying one coat of approved brand with red oxide primer and two coat of oil paint etc. complete and as per instructions of engineer incharge.

7.00

P/F white colour vitreous china CERA CLAIR 1023 COUNTER TOP TypeOval "WASH BASIN" of size 550x 450 mm, including fixing standard make CP Brass bottle trap, 40 mm dia. C.P. brass waste cuplin and PVC Supply pipe etc. complete As per Architect approval and as directed by engineer in charge.

4.00

0


Decimals )

Amount( Upto 2

Decimals )

SqM 0.00 0.00

SqM 0.00 0.00

Rmt 0.00

Rmt 0.00 0.00

Rmt 0.00 0.00

No 0.00 0.00

b


38

39

40

41

42

43

44

45

46

(B) 25 mm. dia. 2


P/F white glazed earthenware EUROPEAN type water closet of CERACOGNEC 2010 or equivalent make fixing P or S trap including fixing 12.5 lt.2112 CERA Cento flushing cistern tank with 2212 intrnal fittings, fixed inwhite water proof cement slurry with curing in true line and level etc. complete with 2308 CERA PVC Seat Cover with CP Brass standard make Jet SprayAs per Architect approval and as directed by engineer in charge.

5.00

Providing and fixing white flat back CERA Age Reversal 5001 size635x395x420 mm. size URINAL of or approved quality connecting the urinal with waste couplin, 15mm Jaquar press matic urinal valve auto closing system with cp brass 20cm bend pipe , wall flages, and urinal spray etc. comp. As directed by engineer in charge.

5.00

Providing & Fixing Standard make and quality 600mmx20mm CP brassCrome Plated Towel Rack comp.. With CP brackets fixed to wooden plug with CP brass screws. As per Architect approval and as directed by engineer in charge.

4.00

Providing & Fixing Standard make ( Ashi, Saint Gobian, Modi Guard orequivalent) and quality 600 mm x 450 mm beveled edge 4mm thick mirror of superior glass mounted on 6 mm thick AC sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers etc. comp. As per Architect approval and as directed by engineer in charge.

4.00

Suppling Fixing Jaquar Continental 011 ( Equivalent make & Quality) PILLERCOCK for wash basin 15mmdia

4.00

Suppling Fixing Jaquar Continental 037 ( Equivalent make & Quality) BIBCOCK with wall flanges 15mm dia

5.00

Suppling Fixing Jaquar Continental 059 ( Equivalent make & Quality) ANGLESTOP COCK with wall flanges 25mm dia

3.00

P/F 15 mm dia brass CC 23059 jaquar clarion Angel Valve with Wall Flangeof equivalent approved quality including fixing in pipe line etc. complete As perArchitect approval as directed by engineer in charge.

3.00

Providing and fixing MS metal half turn lever valve approved quality includingfixing in pipe line etc. complete As per Architect approval as directed by engineer in charge.(A) 15 mm. dia.

3.00

0

0

0

Each 0 0


Decimals )

Amount( Upto 2

Decimals )

Each 0.00 0.00

Each 0.00 0.00

NO 0.00 0.00

NO 0.00 0.00

NO 0.00

NO 0.00

NO 0.00

Each 0.00 0.00

Each 0.00 0.00

b

c

b

c

d

b


47

48

49

50

(B) 40mm dia. 1

(C ) 50mm dia. 1

(B) 25 mm : Service line 140

(C) 40 mm : service line 100

(D) 50 mm : service line 200

(B)150 mm dia 50


P/F gun metal check or non return full way Wheel valve ( Leader, Loto, orEquivalent make) in pipeline of approved quality etc. complete As per Architect instructions and drawing or as directed by engineer in charge. (A) 25mm dia.

1.00

P/L & Fixing air and water tight to wall, ceiling and floor U PVC Finolex /astralor equivelent, tubes (medium grade) nominal bore, including making good the wall, ceiling & floors including necessary tubes fittings and clamps etc. comp. in true line and level and pressure testing the line etc. comp. As directed by engineer in charge.(A) 15 mm : Service line

100.00

P/L & jointing to level and slope 75mm dia rigid SWR pipes of workingpressure 6 kg/Sqm. for RAIN WATER line including all necessary fittings such as bends, Tee Joints, bottom shoe, rubber packing ring fixing the same on the wall in true line and level with help of GI Patti clamps at every two meter including jointing with adhesive solvent cement including cost of all types of fixing materials and all other necessary fixtures including fixing air and water tight testing the line etc. complete as directed by engineer in charge. (A)75mm dia

160.00

P/L & jointing to level and slope rigid SWR pipes of working pressure 10kg/Sqm. for DRAINAGE line in floors including necessary fittings such as bends, "Y" door bend, tees, one way joints, two way joints, rubber packing ring fixing the same concealed in the wall in true line and level with help of GI Patti clamps at every two meter including jointing with adhesive solvent cement rubber packing ring etc. testing of pipe line, jointing with adhesive solvent cement including cost of jointing materials and all other necessary fixtures, fitted air and water tight testing the line etc. complete as directed by engineer in charge.(A)110 mm dia

50.00

N0 0 0

N0 0 0

RMT 0 0

RMT 0 0

RMT 0 0

RMT 0 0


Decimals )

Amount( Upto 2

Decimals )

N0 0.00 0.00

RMT 0.00 0.00

RMT 0.00 0.00

RMT 0.00 0.00


51

52

53

54

55

56


Providing and laying 150mm Ø Stoneware glazed pipe of standard make andquality in proper line level and required slop including jointing with water proof mixture of Cement Mortar in proportion 1:1, including testing of pipes and joints complete. Including making trenches and refilling trenches etc. comp.as per the instructions of EIC.

40.00

Providing and fixing to wall, ceiling and floor galvanised B Class Mild steeltubes (TATA , Jindal or Equivalent make) of the following nominal bore,including tube, Tee, Elbows,union,nipple etc. fitting and clamps including making good the wall and floor including pressure testing of leakage etc. comp.as per the instructions of EIC.25mm Ø

25.00

Providing and fixing PVC (Spun) Nahni trap of the following nominal diameterof self cleaning design with CP brass 15x15cm square Jali on top surface with water proof finish of side and surface including cost of cutting and making good the walls and floor 100mm inlet and 50mm outlet.etc. comp.as per the instructions of EIC.

12.00

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamberand water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps.a) 150 mm X 100 mm. Size-p-or R type.

5.00

Constructing brick masonry chamber for underground C.I. Inspectionchamber & bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 Including . cover with frame (Heavy duty) 455 mm x 610 mm internal dimensions of SFRC Cover with Frame of Heavy duty and Foundation concrete 1:5:10 inside plaster 15 mm th.with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. comp upto 1.5mt depth inside dimension 455 mm x 610 mm x450 deep for pipe line with one or two

5.00

Providing and erecting and fixing double coated Syntex or equivalent PVC.(ISI) water tank of required capacity each with all necessary fittings and connection etc. complete on terrace.

6000.00


Decimals )

Amount( Upto 2

Decimals )

Rmt 0.00 0.00

RMT 0.00 0.00

No 0.00 0.00

No 0.00 0.00

Nos. 0.00 0.00

Liter 0.00 0.00


57

58

59

60


Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/ on surface on wall/ceiling complete with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed.(a) with medium class Rigid PVC pipe and accessories a) One 5A switch controling one light point.

120.00

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) bothare of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in / flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (a) with medium class Rigid PVC pipe and accessories

35.00

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) bothare of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.- 5A socketoutlet with 5A SP switch (as an independent point ) - loop from nearest switch board . - MAX. 6 MTRS. SHOULD CONSIDERED FOR THE POINT WIRING. with medium class Rigid PVC pipe and accessories.

61.00

c) Point wiring for Looped Plug with 6A Modular type switch & 5 pin socketerected on PVC / Metallic box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories -5A socket outlet with 5A switch ( on common board )

50.00


Decimals )

Amount( Upto 2

Decimals )

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00


61

62

63

64

65

66

67


Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) bothare of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in following type of to be erected concealed in / on surface of wall / ceiling complete with Modular type switch & 5 pin Plug erected on PVC / Metallic box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [II] For 16A Plug with 2-2.5 sq.mm Cu. Wire. (a) with medium class Rigid PVC pipe and accessories

25.00

Providing & erecting Switch board for Computer or electric apparatusconsisting of following items in single board erected on PVC / Metal board with 3 mm thick PC (Polycarbonate) / Acrylic sheet erected as directed1 no. 6A/16A universal plug-switch combined.4 nos. 6A Switch4 nos. 6A 5 pin Plug [B] For Modular Type Accessories cat III.

20.00

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copperconductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm

350.00

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copperconductor wire in following type of pipe to be erected in / on wall / ceiling with2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (a) with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

250.00

Providing and erecting wide spread mirror optic recessed mounting fl. fittingwith tube with Electronic Ballast with each tube separately with THD less than10 complete with holder with lead wire and connection and adapter if required. (b) With 2 tube 40 watt. CAT III.

59.00

Providing and erecting mirror optic surface or pendent mounting fl.fitting withtube complete with Electronic Ballast tube complete with holder with lead wire and connection and adapter if required. [B] With 2 No 40 Watt Tube cat III.

21.00

Providing and erecting wide spread mirror optic recessed mounting fl. fittingwith tube with Electronic Ballast with each tube separately with THD less than10 complete with holder with lead wire and connection and adapter if required. © With 2 x14W T5 tubes. CAT III.

30.00


Decimals )

Amount( Upto 2

Decimals )

nos 0.00 0.00

nos 0.00 0.00

mtr 0.00 0.00

mtr 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00


68

69

70

71

72

73

74

75

76

77

78

79


Providing and erecting Approved make Ceiling fan with double ball bearingISI mark with condenser A.C. 23OV.50 c/s.1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2 ,3 core flexible wire with earthing. [Make shall be approved by Engineer in charge]

35.00

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipedown rod erected duly painted for fan complete with necessary 24/ O.20, 3 core flexible wire with earthing.

45.00

Supplying & erecting Fan Hook of 10 mm M.S. Round bar grouted in RCCslab with Making the site as original.

35.00

g) Supplying & erecting fan hook box of 10 mm M.S. round bar bounded tothe RCC bars up to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing.

35.00

Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt &Nuts erected with necessary hook of 10 mm M.S. Round Bar.

35.00

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fanbox.

35.00

Supplying & erecting approved make low noise decorative exhaust fan havingsize 200mm with 1350 RPM with square frame ABS body with inbuilt lowers &square frame.

4.00

Decorative call bell Ting-tong box type 250 volts complete erected on existingpolished wooden block or in M.S. box with 3mm.thick laminated sheet.

3.00

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20Amp. Plug socket, company fabricated powder coated sheet steel enclosure erected as directed with connection. [A] Metal Clad Socket with metal clad top

13.00

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 VA.C. system and having breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark .

120.00

Providing & erecting 240 V MCB double pole switch for motor & inductive load(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity 25 A DP MCB .

15.00

Providing & erecting 240 V MCB double pole switch for motor & inductive load(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity 40 A DP MCB .

2.00

0

0

0


Decimals )

Amount( Upto 2

Decimals )

nos 0.00 0.00

mtrs. 0.00 0.00

nos 0.00

nos 0.00 0.00

nos 0.00

nos 0.00

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

82


80

81

83

84

85

86

Half / One Module Blanking Plate of Standerd Size. 30


Approved make Four pole moulded case circuit breaker having breakingcapacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to100A. with Fixed thermal & magnetic release suitable to work on A.C. supply50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

10.00

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (CCurve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity 63 A FP MCB .

8.00

Providing and erecting Sheet Steel powder coated MCB distribution board -flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (J) Three phase 4 way SS Double door for single phase outgoing horizontal box

5.00

Providing and erecting Sheet Steel powder coated MCB distribution board -flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (J) Three phase 4 way SS Double door for single phase outgoing horizontal box (L) Three phase 6 way SS Double door for single phase outgoing horizontal box

1.00

Providing and erecting Sheet Steel powder coated MCB distribution board -flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) (H) Single phase 12 way SS Double door

2.00

Approved make ELCBs / RCCBs conforming to IS: 12640 and havingsensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on single phase 240 V. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. rating erected as directed 40 A DP ELCB,100mA .

6.00

nos 0 0


Decimals )

Amount( Upto 2

Decimals )

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00


87

88

89

90

91


Providing & erecting weather proof, dust & vermin proof, floor mounted frontoperated indoor type cubical panel board having IP-64 protection made from14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary supporting angles, flats including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection of supplied switch gears, BUSBARS, with suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses for measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket complete. The Panel shall be painted with epoxy powder coating. (A) The standard companies switch gear shall be used and only manufacturers at CPRI approved factory and shall (i) be certified by that company whose switch gears are used after fabrication for beneficial use (i) with 350mm depth

5.00

Approved make Four pole moulded case circuit breaker having breakingcapacity ICU of 35 KA. at 415 V . having normal current rating up to 250A. with variable thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing.

2.00

Approved make Earth fault Relay suitable to mount with inter connection tomoulded case circuit breaker having CT ratio & MCCB rating as following along with shunt trip 220V AC. with all internal connections & complete erected in existing M.S.housing.. (3) 250 A -400 A , CT Ratio 1/400

2.00

Supplying & erecting approved make Four Pole 415V change over switchinterior for panel mounting with operating mechanism A.C.23 duty confirming to IS for (E)250A / 320A

1.00

Supplying and erecting triple pole & neutral 440V / 500V panel mountingCopper Busbars with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each bar, erected in existing cubical panel with necessary connections. (C) Suitable for 300 Amp. capacity

2.00


Decimals )

Amount( Upto 2

Decimals )

sq. mtr. 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

Rn.Mtr 0.00 0.00

93

98

99


92

94

95

96

97

100

* Phase indicator lamps phase wise. 1

25 x 3 mm G.I. Strip - From G. I. Earthpit to Main Panel 20

25 x 3 mm CU.strip. - From Cu. Earthpit to Main Panel 20


* Ammeter and Voltmeter with selector switches, control fuses. - digital typemeterC.T. shall be of 15VA class 1 type and shall be resin cast type

1.00

EARTHING SYSTEM: Supplying & erecting in earthpit of minimum bore dia.225mm size ASH or approved make Safe Earthing Electrode consisting Pipe- in-Pipe Technology as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications. [A] For electrical installation up to 440 VLength of Pipe - 1 MtrBack filling compound - 1 Nos. of Bag of 15 Kgs.

1.00

[C] For Electrical Installation covering Transformer Neutrals, Lightningarrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA)i.e. independent Earthing located in other than normal soil i.e. Soft Rock, Marshy Soil etc..-Length of Pipe : 3 Mtrs.-Back filling Compound :2 nos Bags of 25 Kg.

1.00

Supply, Laying and Jointing of following wire/strip/earth cable on walls,ceilings etc. with necessary non rusting clamps, washers, nuts & bolts etc. complate. 8 SWG G.I. Wire with 20 mm dia. PVC rigid conduit duly cleated / concealed / burried in floor etc. complete for ELE. PANEL, ALL DBS , ETC.

20.00

Supply, Laying and Jointing of following wire/strip/earth cable on walls,ceilings etc. with necessary non rusting clamps, washers, nuts & bolts etc. complate. 8 SWG CU. Wire with 20 mm dia. PVC rigid conduit duly cleated / concealed / burried in floor etc. complete.

10.00

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrandAluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. .( LENTH TO BE VERIFY AT SITE ) - 4 x 6 sq. mm Cu. Conductor YWY cable. (Main Panel to PDB & LDB )

40.00

0

set 0 0

Kgs. 0 0

Kgs. 0 0


Decimals )

Amount( Upto 2

Decimals )

set 0.00

nos 0.00 0.00

nos 0.00 0.00

Kgs. 0.00 0.00

Kgs. 0.00 0.00

mtr 0.00 0.00


101

102

103

104

105

106

107

108

109

110

111


Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrandAluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables 3.5 x 95 sq. mm Alu. Condudtor AYFY cable. ( main cable meter to main panel ) (LENGTH as per site contition).

30.00

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrandAluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables 3.5 x 50 sq. mm Alu. Condudtor AYFY cable. ( main cable for DG SET to main panel ) (LENGTH as per site contition).

30.00

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrandAluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables4 x 16 sq. mm Alu. Condudtor AYFY cable. ( DUCTABLE AC & ACDB to main panel ) (LENGTH as per site contition).

40.00

50 sq.mm single core Cu. wire supply & laying for main load wire from meterto main switch in flexible pipe. if required.

12.00

4 x 2.5 sq. mm Cu. Conductor YWY cable. (Main Panel to streetlight & forsubmersible pump ).

40.00

supply and fixing of brass single compression type cable glands for 4 x 6 sq.mm Cu. Conductor YWY cable. (Main Panel to PDB & LDB ) .

12.00

supply and fixing of brass single compression type cable glands for 3.5 x 95sq. mm Alu. Condudtor AYFY cable. ( main cable meter to main panel ).

2.00

supply and fixing of brass single compression type cable glands for 3.5 x 50sq. mm Alu. Condudtor AYFY cable. ( main cable for DG SET to main panel ).

2.00

supply and fixing of brass single compression type cable glands for 4 x 16 sq.mm Alu. Condudtor AYFY cable. ( DUCTABLE AC & ACDB to main panel )

4.00

supply and fixing of brass single compression type cable glands for 4 x 2.5sq. mm Cu. Conductor YWY cable. (Main Panel to streetlihght & for submersible pump & LDB to Highbay fittings ).

4.00

supply and fixing of crimping type aluminum / copper lugs suitable forterminations of armoured cables for 4 x 6 sq. mm Cu. Conductor YWYcable. (Main Panel to PDB & LDB ).

20.00

0

0

0


Decimals )

Amount( Upto 2

Decimals )

mtr 0.00 0.00

mtr 0.00 0.00

mtr 0.00 0.00

mtr 0.00

mtr 0.00

nos 0.00

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00


112

113

114

115

116

117

118

119

120


supply and fixing of crimping type aluminum / copper lugs suitable forterminations of armoured cables for 3.5 x 95 sq. mm Alu. Condudtor AYFYcable. ( main cable meter to main panel ).

8.00

supply and fixing of crimping type aluminum / copper lugs suitable forterminations of armoured cables for 3.5 x 50 sq. mm Alu. Condudtor AYFYcable. ( main cable for DG SET to main panel ).

8.00

supply and fixing of crimping type aluminum / copper lugs suitable forterminations of armoured cables for 4 x 16 sq. mm Alu. Condudtor AYFYcable. ( DUCTABLE AC & ACDB to main panel ).

24.00

Supply and fixing of crimping type aluminum / copper lugs suitable forterminations of armoured cables for 50 sq.mm single core Cu. wire supply & laying for main load wire from meter to main switch in flexible pipe. if required.

8.00

supply and fixing of crimping type aluminum / copper lugs suitable forterminations of armoured cables for 4 x 2.5 sq. mm Cu. Conductor YWY cable. (Main Panel to streetlihght & for submersible pump & LDB to Highbay fittings ) .

8.00

Supply and installing telephone point with Telephine socket outlets of RJ 11 ofaapproved make with company made concealed boxes in walls / furniture's etc. complete ( without wiring) - for Intercom Tele. facility.

20.00

Providing, installing, testing, commissioning of 2 pair of 0.51 cross sectionpvc insulated copper conductor telephone wire of ITI approved with 20/25 dia. PVC conduits with accessories duly burried under floor with necessarychasing / breaking in floor and to be refinished with all necessary civil material etc. or to be cleated on wall / ceiling with saddles / spacer etc. necessary termination etc. complete. FROM KRONE BOX TO ALL TELE. POINTS.

400.00

Supply, installation, testing and commissioning of 20pair krone telephone tagblock duly enclosed in sheet meral powder coated box with locking arrangement complete with necessary terminations.

3.00

Supply, installation, testing and commissioning of CAT 6, RJ 45 informationoutlet (I/O) of D-link mke with front modular cover plate, flush box metallic orPVC for trucking system etc. complete with terminations etc complete.

40.00


Decimals )

Amount( Upto 2

Decimals )

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

mtr 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00


121

122

123


Providing, installing, testing, commissioning of CAT 6 UTP pvc insulatedcopper conductor data cable of D - Link with 20/25 dia. PVC conduits with accessories duly burried under floor with necessary chasing / breaking in floor and to be refinished with all necessary civil material etc. or to be cleated on wall / ceiling with saddles / spacer etc. necessary termination etc. with ferrule numbering at both ends of each piece of cable complete.[ 2 Lines from BSNL Krone to new krone].

600.00

Supplying submersible pump set suitable for bore of 150 mm. dia. or morehaving three phase motor capacity not more than 5 H.P. with following capacity .(a) (8 stage) 240 to 200 LPM discharge at 70 to 78 mtrs. head respectively suitable for 50mm dia. delivery pipe

1.00

Supplying and erecting Direct on line starter with 30 Amp. (resistive @ 230v)power relay and with 2 to 5/ 4 to 10 / 8 to 20 amp. Range C.T. Operated electronic overload relay in engineering grade plastic enclosure for 3 ph 415v50 HZ A.C. motor up to 7.5 HP with high voltage protection (above 480 v) and under voltage protection (below 330 v) current sensing single phasing protection. Reverse phasing protection, inverse current characteristicoverload protection with indication for On, OL, HV,LV SPP in a single unit with feather touch start / stop push button, high temperature with standing Bakelite terminals complete erected on P.W. Block with necessary connection. [Cat.II]

1.00


Decimals )

Amount( Upto 2

Decimals )

mtr 0.00 0.00

nos 0.00 0.00

nos 0.00 0.00

(341570861) schedule b (without rate)

Documents