3andsinks - waldner lab · benchwithh-frame 3 intendeduse bench frame with worktop made of various...
TRANSCRIPT
![Page 1: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/1.jpg)
102
In our new SCALA laboratory furniture system, laboratory benches are of major significance.
The consequent separation of services supply and furniture creates flexibility in the laboratory.
All variants of our benches can be selected with various worktop materials for a large number of ap-plication possibilities everywhere in the laboratory.
High stability, straightforward design and perfect appearance characterise our laboratory benches.
Access to water must meet various requirements in the laboratory.
Large sink modules, integrated sinks, drip cups and sink modules in service modules or fume cup-boards are integrated in the laboratory as required by the specific situation.
Wherever mobility is required, our mobile units are used: under the service wing, for the suspended service boom, the service columns and the service ceiling – for fast moving in the laboratory.
Laboratorybenchesandsinks3
![Page 2: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/2.jpg)
103
Lab
ora
tory
ben
ches
an
ds
inks
33
Laboratorybenches 108Combinations of materials/bench frames 108Worktop material 110Bench with H-frame 115Bench with C-frame 116Bench with cantilever frame 117Bench with self-supporting underbench units 118
Mobiletables 119
Laboratorysinks 120Laboratory sink 120Laboratory sink module 121Drip cup on service spine 123Drip cup in worktop 124Mobile sink 125AquaEL 126
Specialtables 127Add-on table for low level fume cupboards 127Balance table 128Rack 129Heavy duty rack 130Swing 131Height-adjustable table 132Round table 133Sliding element Sekretär 134Sliding element Assistent 135Sliding element Protector 136
![Page 3: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/3.jpg)
104
Our benches offer a large number of possible ap-plications.
Our new bench frames are made of precision rectangular tubes with reinforced cross-section. The bench frames can carry a load of 200 kg without any problem. Optimally protected against external effects through the entirely homogenous powder coating, our bench frames have a flawless appear-ance.
The same applies to the surfaces of our work -tops. You can choose from our wide range of ma -terials according to your requirements.
BenchframesfordifferentneedsWith their constructional designs, C-frame,
H-frame and cantilever bench frames form the basis for our work benches depending on the require-ment and application.
DifferentstandardwidthsavailableIn order to be able to divide the workplaces in
your laboratory to suit your needs, we offer a large number of frame widths.
ImprovedlevelcompensationOur new flush-mounted height-adjustable feet
for C and H-frames offer up to 23 mm regulating distance, as an option up to 50 mm. Easy access and adjustment, for steady positioning.
EasycleaningThe new height adjustment holds the C-frame
approx. 30 mm above the floor. This makes cleaning the floor extremely easy.
Laboratorybenchesandsinks3
![Page 4: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/4.jpg)
105
Lab
ora
tory
ben
ches
an
ds
inks
33
H-frameprovides a high level of stability for add-on
tables, mobile tables and analysis tables for working sitting or standing.
Underbench cabinets can be mobile or suspend-ed and moved independent of modular size. Sitting niches are therefore possible anywhere.
C-framesare extremely steady and can be loaded with
200 kg. They provide users with a large amount of knee and legroom with mobile and suspended underbench units.
Cantileverframeprovides the greatest legroom and lightest visual
impact. It is fitted to service spines or directly to walls via its cantilever bracket design.
Suspendedunderbenchunitsthatcanbemoved
Our new profile enables underbench units suspended in cantilever and C-frames to be moved across frames.
Movableknee-holecoverpanelsFor benches without underbench units we use
movable and height-adjustable knee-hole cover panels. In this way, installations routed below the rear side of the table can be hidden.
OtherusefulhelpersAdd-on tables, Swings and round tables are
autonomous objects and can be combined to form new modules as required. Our height-adjustable bench can be adjusted from 700 to 950 mm.
Ourmulti-talent:therackThe rack is perfect for fitting items of equip-
ment, AquaEl and others. The robust shelves are height-adjustable and the castors enable the fast changing of location.
![Page 5: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/5.jpg)
106
There are no limits to using sinks and drip cups in the laboratory. With a new appearance that matches our range of laboratory furniture SCALA and is made of tried-and-tested materials, our sink elements can be perfectly integrated where they are needed. Materials such as stoneware, polypropyl-ene, stainless steel and epoxy are extremely durable.
StonewaresinkmodulesOur sink modules can be integrated as end sink
units or along the service spine. The module made of high-strength baked and glazed stoneware in 1200 mm width is made of one piece without joints. Our sink modules are mounted on plinth units that can be fitted with drawers and hinged or tilting doors as desired.
SinkmodulesanddripcupsSink modules made of stoneware or polypropyl-
ene are integrated into the service spine above the bench. Drip cups are fitted directly in the worktop. They are made of stoneware, polypropylene, epoxy resin or stainless steel.
Laboratorybenchesandsinks3
![Page 6: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/6.jpg)
107
Lab
ora
tory
ben
ches
an
ds
inks
33
LaboratorysinkSinks are permanently installed components of
laboratory furniture and placed against the service spine or a wall. Sinks can be combined with various types of worktop materials in many versions.
MobilesinkandAquaElThe mobile sink with castors supplements the
variable laboratory below the service wing and ser-vice ceiling. The mobile sink is connected directly to the service wing or service ceiling system via flexible pipes. AquaEl is a ready to plug in compact system for the easy supply and disposal of water in service modules. A lifting unit disposes of the waste water through the respective system.
![Page 7: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/7.jpg)
108
Lab
ora
tory
ben
ches
an
ds
inks
Laboratorybenches
3
Combinationsofworktopandbenchframematerials
Material,worktop Coatedparticle-board
Coatedparticle-board(postforming)
Solidgradelaminate
Solidgradelaminate
TrespaToplab+
Polypropylene
H-frame
x x x x x
C-frame
x x x x x
Cantilever bench frame
x x x x x
Mobile table frame
x x x x x
H-frame for low level fume cupboards
– – – – x 4)
Balance table
x x – – –
Swing
x 1) – – – –
Round table
x 1) – – – –
Rack
x 2) – – – –
Sliding elements
x 3) – – – –
1) Walnut veneer or light grey 2) Shelves white, top of Sekretär walnut veneer3) Only walnut veneer 4) Material with surrounding increased edge
Combinationsofmaterials/benchframes
![Page 8: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/8.jpg)
109
Lab
ora
tory
ben
ches
an
ds
inks
Laboratorybenches
3
Material,worktop Epoxy Stainlesssteel
Stoneware Compositeworktop
Glass
H-frame
x x x x x
C-frame
x x x x x
Cantilever bench frame
x x x x x
Mobile table frame
x x x x x
H-frame for low level fume cupboards
x 4) x 4) x 4) – –
4) Material with surrounding increased edge
![Page 9: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/9.jpg)
110
Lab
ora
tory
ben
ches
an
ds
inks
LaboratorybenchesWorktopmaterial
3
Melamineresinfacing/postforming
Critical substances Acids in concentrations > 10 %
Damaging substances Concentrated hydrochloric acidsNitric acid Heated sulphuric acid
Advantage Flat
Limitations Joints sensitive to moistureMedium chemical resistance
Use Mobile table, add-on table, window benches Instrument benches and laboratory benches in the dry areaCannot be used in the moist or wet area
Weight [kg/m²] 19.6
Overall thickness [mm] 30
Light greyNCS S 3005 R80B
Polypropylene
Critical substances HydrocarbonsCitric acidOxalic acidCarbon tetrachlorideDiesel oil
Damaging substances OzoneConcentrated nitric acidChloroformPetrolBenzol
Advantage No jointsFlatLightHigh chemical resistance to acids and many solventsEasy to dispose ofLess breakage of glass
Limitations Soft surface sensitive to scratchesSensitive to heat
Use Areas with high resistance to chemicalsWorking with hydrofluoric acidRadio-isotope areaAreas in which the lack of joints is important
Weight [kg/m²] 20.3
Overall thickness [mm]Increased edge [mm]
307
Light greyNCS S 3005 R80B
Worktopmaterial
![Page 10: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/10.jpg)
111
Lab
ora
tory
ben
ches
an
ds
inks
LaboratorybenchesWorktopmaterial
3
Solidgradelaminate
Critical substances Acids in concentrations > 10 %
Damaging substances Concentrated hydrochloric acidsNitric acid Heated sulphuric acid
Advantage Moisture-resistant FlatEasy to dispose of
Limitations Reduced coating thickness
Use Wet roomsPhysical laboratories Tables with average load
Weight [kg/m²] 26.4
Overall thickness [mm] 19
Light greyNCS S 3005 R80B
SolidgradelaminateTrespaToplab+
Critical substances Acids in concentrations > 10 %
Damaging substances Concentrated hydrochloric acidsNitric acid Heated sulphuric acid
Advantage Antibacterial Highly-compressed surface structure High chemical resistanceMoisture-resistant FlatEasy to dispose of
Limitations Reduced coating thickness
Use Chemical, microbiological, genetical-engineering laboratories
Weight [kg/m²] 26.4
Overall thickness [mm] 19
Glacier blue Similar to NCS 1010 R80B
![Page 11: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/11.jpg)
112
Lab
ora
tory
ben
ches
an
ds
inks
LaboratorybenchesWorktopmaterial
3
Epoxy
Critical substances Various solventsDiluted acids
Damaging substances Hydrofluoric acidConcentrated warm mineral acids
Advantage No jointsFlatSolid panelHigh mechanical load capacityEasy to dispose of
Limitations Surface sensitive to scratchesSensitive to concentrated acids
Use Laboratory workstation of all type
Weight [kg/m²] 32
Overall thickness [mm]Increased edge [mm]
197
Platinum greySimilar to NCS S 4202-R
Stainlesssteel
Critical substances CadmiumLactic acidOxalic acid
Damaging substances Compounds containing chlorine and bromineFormic acidSulphuric acid
Advantage No jointsHigh resistance to solventsHigh temperature resistance
Limitations Sensitive to halogens and their compounds
Use For maximum loads in the area of decontamination and moisture resistance as well as solvent resistanceBiologyMicrobiologyPharmacyRadio-isotope areaPathology
Weight [kg/m²] 27.5
Overall thickness [mm]Increased edge [mm]
307
![Page 12: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/12.jpg)
113
Lab
ora
tory
ben
ches
an
ds
inks
LaboratorybenchesWorktopmaterial
3
Stoneware
Critical substances None
Damaging substances Hydrofluoric acid
Advantage Best chemical resistanceMechanically stableEasy to dispose of
Limitations Evenness tolerances due to firing processThermodynamic stress limited
Use Areas subject to very high chemical and mechanical stress
Weight [kg/m²] 56
Overall thickness [mm]Increased edge [mm]
267
Light greyNCS S 3005 R80B
Compositeworktop
Critical substances None
Damaging substances Hydrofluoric acid
Advantage FlatLighter than stoneware Best chemical resistanceEasy to dispose of
Limitations Thermodynamic stress limited
Use Areas with very high chemical stress
Weight [kg/m²] 40
Overall thickness [mm]Increased edge (epoxy resin) [mm]
307
WhiteSimilar to NCS S 0300-N
![Page 13: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/13.jpg)
114
Lab
ora
tory
ben
ches
an
ds
inks
LaboratorybenchesWorktopmaterial
3
Glass
Critical substances None
Damaging substances Hydrofluoric acid
Advantage FlatHigh chemical resistance
Limitations Sensitive to knocks at corners and edges
Use Laboratory benches of all types subject to large amounts of chemicals
Weight [kg/m²] 38
Overall thickness [mm] 30
Light green NCS S 2010 G10Y
![Page 14: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/14.jpg)
115
Lab
ora
tory
ben
ches
an
ds
inks
LaboratorybenchesBenchwithH-frame
3
Intendeduse�� Bench frame with worktop made of various materials as a work surface and storage area for laboratory work�� Supporting construction for analytical equipment and superstructures
Design
Technicaldata
Dimensions
Width [mm] 600 900 1200 1500 1800
Depth [mm] 600750900
Working height [mm] 750900
Loadbearingcapacity
H-frame [kg] 200 (for fixing to the wall or for fixing to a service spine)
Designcharacteristics
Construction For suspended underbench units, cannot be moved for all kinds of framesFor underbench units on castors
Height-adjustable feet Individually adjustable
Material
Bench frame Steel profile 60/25/2 mm
Worktop Depending on requirement
Height-adjustable feet Plastic housing with steel spindle
BenchwithH-frame
![Page 15: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/15.jpg)
116
Lab
ora
tory
ben
ches
an
ds
inks
LaboratorybenchesBenchwithC-frame
3
Intendeduse�� Bench frame with worktop made of various materials as a work surface and storage area for laboratory work�� Supporting construction for analytical equipment and superstructures
Design
Technicaldata
Dimensions
Width [mm] 600 900 1200 1500 1800
Depth [mm] 600750900
Working height [mm] 750900
Loadbearingcapacity
C-frame [kg] 200
Designcharacteristics
Construction For suspended underbench units, can be moved for all kinds of framesFor movable underbench units
Height-adjustable feet Individually adjustable
Material
Bench frame Steel profile 70/25/3 mm
Worktop Depending on requirement
Height-adjustable feet Plastic housing with steel spindle
BenchwithC-frame
![Page 16: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/16.jpg)
117
Lab
ora
tory
ben
ches
an
ds
inks
LaboratorybenchesBenchwithcantileverframe
3
Intendeduse�� Bench frame with worktop made of various materials as a work surface and storage area for laboratory work�� Supporting construction for analytical equipment and superstructures�� For fixing to the wall or for fixing to a service spine
Design
Technicaldata
Dimensions
Width [mm] 600 900 1200 1500 1800
Depth [mm] 750900
Working height [mm] 750900
Loadbearingcapacity
Cantilever frame [kg] 200 (for permanent mounting to a wall or a wall-mounted service spine)
Designcharacteristics
Construction For suspended and movable underbench units, can be moved for all kinds of frames
Height-adjustable feet Individually adjustable
Material
Bench frame Steel profile 70/25/3 mm
Worktop Depending on requirement
Height-adjustable feet Plastic housing with steel spindle
Benchwithcantileverframe
![Page 17: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/17.jpg)
118
Lab
ora
tory
ben
ches
an
ds
inks
LaboratorybenchesBenchwithself-supportingunderbenchunits
3
Intendeduse�� Self-supporting underbench unit on plinth with worktop made of various materials as a work surface and storage area for laboratory work�� Supporting construction for analytical equipment and superstructures
Design
Technicaldata
Dimensions
Overall width [mm] Max. 3000
Width, underbench unit [mm] 4506009001200
Total depth [mm] 750900
Working height [mm] 750900
Material
Worktop Depending on width and requirement
Loadbearingcapacity
Bench with self-supporting underbench unit [kg]
200
Benchwithself-supportingunderbenchunits
![Page 18: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/18.jpg)
119
Lab
ora
tory
ben
ches
an
ds
inks
MobiletablesMobiletable
3
Intendeduse�� Movable bench frame with worktop made of various materials as a work surface and storage area for laboratory work�� Movable supporting construction for analytical equipment and superstructures
Design
Technicaldata
Dimensions
Width [mm] 900 1200 1500
Depth [mm] 600750900
Working height [mm] 750900
Loadbearingcapacity
Mobile table [kg] 150
Per heavy load castor [kg] 110
Designcharacteristics
Heavy load castors 4, of which 2 can be locked (castor and steering axle can be locked)
Shelf Optional
Underbench unit Optional
Material
Bench frame Steel profile 60/25/2 mm
Worktop Depending on requirement
Mobiletable
![Page 19: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/19.jpg)
120
Lab
ora
tory
ben
ches
an
ds
inks
LaboratorysinksLaboratorysink
3
Intendeduse�� Water supply and disposal�� For cleaning operating equipment�� To take up large amounts of water�� Not suitable for the disposal of chemicals
Design
3
2
1
1 Underbenchunit2 Sink3 Outlet
Technicaldata
MaterialWorktop
MaterialSinks
SinkdimensionsWidthxdepthxheight[mm]
Typeofinstallation
Stoneware Stoneware 400 x 400 x 250500 x 400 x 250
Sink installed flush with the worktop
Melamine resin facing, Solid grade laminate, Trespa Toplab+
Polypropylene 320 x 320 x 200400 x 400 x 250500 x 400 x 250
Sink with surrounding increased edge installed in the worktop from above
Melamine resin facing, Solid grade laminate, Trespa Toplab+
Stainless steel 340 x 370 x 150500 x 400 x 250
Sink with surrounding increased edge installed in the worktop from above
Polypropylene Polypropylene 385 x 385 x 250485 x 385 x 250
Sink attached to the worktop from the bottom and welded
Stainless steel Stainless steel 400 x 400 x 250500 x 400 x 250
Sink welded in flush with the worktop
Composite worktop Stoneware 380 x 380 x 250530 x 380 x 250
Sink installed flush with the worktop
Epoxy Epoxy 406 x 305 x 203406 x 406 x 190457 x 380 x 279
Sink installed flush with the worktop
Dimensions
Width [mm] 600 900 1200 1500 1800
Depth [mm] 6001)
6751)
7051)
750825855900
Working height [mm] 900
1) Positioning of the outlets on the side of the sink, if required
Sanitarytechnology
Water connection Permanent connection
Waste water connection Permanent connection with siphon
Water fitting (tap) Bench-mounted service outlet as an option
Eye shower Optional
Laboratorysink
![Page 20: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/20.jpg)
121
Lab
ora
tory
ben
ches
an
ds
inks
LaboratorysinksLaboratorysinkmodule
3
Intendeduse�� Water supply and disposal�� For cleaning operating equipment�� To take up large amounts of water�� For installation on special underbench units�� Not suitable for the disposal of chemicals
Design
2
1
3
1 Outlet2 Sinkmodule3 Underbenchunit(3-piece)
Variants
Laboratorysinkmodule
![Page 21: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/21.jpg)
122
Lab
ora
tory
ben
ches
an
ds
inks
LaboratorysinksLaboratorysinkmodule
3
Technicaldata
Dimensions
Width, sink module [mm] 600 1200 1500 1800
Depth, sink module for wall bench with service spine [mm]
675 or 825
Depth, sink module for double bench with service spine [mm]
705 or 855
Depth, sink module in front of building wall [mm]
760 or 910
Depth, sink module as an end sink [mm]
– 740
Overall height, sink module with underbench unit [mm]
910 front to 950 rear
Sink dimensions, width x depth x height [mm]
460 x 390 x 250
Height, edge of sink [mm] 20 front to 50 rear
Material
Sink module Stoneware
Designcharacteristics
Construction Self-supporting moulded draining areaSurrounding increased edge
Modular design Different underbench units possibleAs end sink with special underbench unit
Sanitarytechnology
Water connection Permanent connection
Waste water connection Permanent connection with siphon
Water fitting (tap) Bench-mounted service outlets as an option
Eye shower Optional
![Page 22: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/22.jpg)
123
Lab
ora
tory
ben
ches
an
ds
inks
LaboratorysinksDripcuponservicespine
3
Intendeduse�� Water supply and disposal�� For cleaning operating equipment�� Sink module underneath water fittings to take up small amounts of water�� Not suitable for the disposal of chemicals
Design
1 Servicepanelwithcornervalves2 Sinkmodule3 Fasciapanelforservicespine
Technicaldata
Dimensions
Width [mm] 294
Depth [mm] 132
Height [mm] 112
Internal sink dimensions width x depth x height [mm]
Approx. 270 x 85 x 80
Material
Sink module StonewarePolypropylene
Designcharacteristics
Construction Attached to the fascia panel of the service spine
Sanitarytechnology
Water connection Permanent connection
Waste water connection Permanent connection with siphon
Water fitting (tap) Cell outlets as an option
Dripcuponservicespine
![Page 23: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/23.jpg)
124
Lab
ora
tory
ben
ches
an
ds
inks
LaboratorysinksDripcupinworktop
3
Intendeduse�� Water supply and disposal�� For cleaning operating equipment�� Drip cup underneath water fittings to take up small amounts of water�� Not suitable for the disposal of chemicals
Design
1 Outlet2 Dripcup3 Worktop
Technicaldata
Dimensions
Width x depth [mm] 295 x 145
Height [mm] Approx. 125 to 140 depending on material
Internal sink dimensions width x depth x height [mm]
Approx. 250 x 100 x 150
Material,dripcup Material,worktop
Stoneware Stoneware, composite worktop
Polypropylene Polypropylene, melamine resin facing, solid grade laminate, Trespa Toplab+
Stainless steel Stainless steel, melamine resin facing, solid grade laminate, Trespa Toplab+
Epoxy Epoxy
Designcharacteristics
Construction Installed in the worktop from the top or bottom
Sanitarytechnology
Water connection Permanent connection
Waste water connection Permanent connection with siphon
Water fitting (tap) Bench-mounted service outlets as an option
Dripcupinworktop
![Page 24: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/24.jpg)
125
Lab
ora
tory
ben
ches
an
ds
inks
LaboratorysinksMobilesink
3
Intendeduse�� Mobile water and gas supply and disposal�� For cleaning operating equipment at any location�� Not suitable for the disposal of chemicals
Design
1 Connectingpipes2 Fittingwithtwocoldwater
outletpoints3 Worktop4 Sink5 Underbenchunitoncastors
Technicaldata
Dimensions
Width [mm] 605
Depth [mm] 600
Height without outlet [mm] 900
Sink dimensions width x depth x height [mm] 320 x 320 x 200
Height, [mm] castors 110
Length, supply and drain pipes [mm] 2500
Length, connecting pipes [mm] 2500
Material
Worktop Particle-board with melamine resin facing
Sink Polypropylene
Loadbearingcapacity
Mobile sink [kg] 150
Designcharacteristics
Construction Mounted on underbench unit on castors with hinged doorSink installed in the worktop from abovePipes and cables routed out at the rear of the underbench unitWaste water lifting unit in the underbench unitWater supply is switched off in the case of a power failure
Electrics
Power supply [V] 230
Sanitarytechnology
Water connection Flexible with plug connector
Waste water connection Flexible with plug connector
Gas connection Flexible with plug connector as an option
Water fitting (tap) Standard outlet
Gas outlet Standard outlet combined with water fitting as an option
Mixer tap Additional flexible water connection as an option
Mobilesink
2
1
5
34
![Page 25: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/25.jpg)
126
Lab
ora
tory
ben
ches
an
ds
inks
LaboratorysinksAquaEL
3
Intendeduse�� Mobile water and gas supply and disposal�� For cleaning operating equipment at the workplace at any mobile or stationary laboratory workstation�� Not suitable for the disposal of chemicals
Design
2
1
34
1 Connectingpipes2 Outletwithwateroutletpoint3 Housingwithpump4 Sink
Technicaldata
Dimensions
Width x depth x height (without outlet) [mm] 317 x 585 x 268
Sink, width x depth x height [mm] 260 x 275 x 105
Length, supply and drain pipes [mm] 1500
Length, connecting pipes [mm] 1500
Weight
Weight without outlet [kg] 14
Material
Material GFK varnished
Designcharacteristics
Construction Compact system with flexible pipes and cables ready for connectionWaste water lifting unit integrated in the housingWater supply is switched off in the case of a power failure
Electrics
Power supply [V] 230
Sanitarytechnology
Water connection Flexible with plug connector
Waste water connection Flexible with plug connector
Gas connection Flexible with plug connector as an option
Water fitting (tap) Standard outlet
Gas outlet Standard outlet combined with water fitting as an option
Mixer tap Additional flexible water connection as an option
AquaEL
![Page 26: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/26.jpg)
127
Lab
ora
tory
ben
ches
an
ds
inks
SpecialtablesAdd-ontableforlowlevelfumecupboards
3
Intendeduse�� For adding to low level fume cupboards�� Bench frame with worktop made of various materials as a work surface and storage area for laboratory work�� Supporting construction for analytical equipment and superstructures
Design
Technicaldata
Dimensions
Width [mm] 900 1200 1500 1800 2100
Depth [mm] 600
Working height [mm] 500
Material
Bench frame Steel profile 60/25/2 mm
Worktop Depending on requirement
Height-adjustable feet Plastic housing with steel spindle
Loadbearingcapacity
H-frame [kg] 200
Designcharacteristics
Worktop Surrounding increased edge
Height-adjustable feet Individually adjustable
Add-ontableforlowlevelfumecupboards
![Page 27: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/27.jpg)
128
Lab
ora
tory
ben
ches
an
ds
inks
SpecialtablesBalancetable
3
Intendeduse�� For setting up analytical balances and other sensitive measuring equipment�� Bench frame with worktop and specially mounted, vibration-free plate
Design
2
1
1 Balanceplatemadeoffineconcrete
2 Tablecover
Technicaldata
Dimensions
Width [mm] 900
Depth [mm] 750900
Working height [mm] 750900
Width x depth [mm] balance plate 400 x 450
Material
Supporting construction Steel profile
Worktop Depending on requirement
Balance plate Fine concrete
Weight
Total weight [kg] 120
Balance plate [kg] 65
Designcharacteristics
Construction Specially mounted, heavy balance plate made of fine concreteSupporting construction with balance plate, vibration-decoupled
Balancetable
![Page 28: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/28.jpg)
129
Lab
ora
tory
ben
ches
an
ds
inks
SpecialtablesRack
3
Intendeduse�� Mobile flexible storage area�� Can be used with the 600 mm deep shelf as a mobile workplace for desk work�� Not suitable for storing hazardous substances
Design
2
1
3
41 Steelsupportframewithgrid2 Shelf,depth450mm3 Shelf,depth600mm4 Heavyloadcastorswithbrakes
Technicaldata
Dimensions
Width [mm] with shelf 900
Depth [mm] with shelf depth 450 mm 600
Height [mm] 1790
Depth, shelf [mm] 450600
Material
Supporting construction Steel profile
Shelf 22 mm Shelf of OSB board
Loadbearingcapacity
Total [kg] 150
Shelf [kg] 20
Designcharacteristics
Heavy load castors 4, of which 2 can be locked (castor and steering axle can be locked)
Shelf Can be adjusted without tools with a pitch of 150 mm
Integrated distribution pillar Optional
Rack
![Page 29: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/29.jpg)
130
Lab
ora
tory
ben
ches
an
ds
inks
SpecialtablesHeavydutyrack
3
Intendeduse�� Mobile multi-stage storage area�� With flexible work surfaces for free horizontal configuration�� Suitable for accommodating stackable and non-stackable measuring instruments / measuring instrument towers�� Suitable for heavy apparatus
Design
2
13
43
6
5
1 Lowershelf,fixed2 Height-adjustableshelf,full
width3 Height-adjustableshelf,depth
590mm4 Steelsupportframe5 Heavyloadcastorswithoutbrake6 Heavyloadcastorswithbrake
Technicaldata
Dimensions
Width [mm] 1200 1800
Depth [mm] 770
Height [mm] 1790
Shelf, width x depth [mm] 500 x 5901072 x 590
500 x 5901672 x 590
Material
Supporting construction Steel profile 70 x 40 mm
Shelf Shelf of OSB board
Loadbearingcapacity
Total 500 [kg]
Shelf 500 x 590 [mm] 30 [kg]
Shelf 1072 x 590 [mm] 70 [kg]
Shelf 1672 x 590 [mm] 70 [kg]
Lower shelf 1072 x 590 [mm] 150 [kg]
Lower shelf 1672 x 590 [mm] 150 [kg]
Designcharacteristics
Heavy load castors 4, of which 2 can be locked (castor and steering axle can be locked)
Shelf Can be adjusted with a grid of 75 mm
Heavydutyrack
![Page 30: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/30.jpg)
131
Lab
ora
tory
ben
ches
an
ds
inks
3SpecialtablesSwing
Intendeduse�� Bench frame with worktop made of various materials as a work surface and storage area for laboratory work�� Supporting construction for analytical equipment and superstructures�� Visually appealing connection of laboratory benches of different depths
Design
Technicaldata
Dimensions
Width [mm] 1200 1500
Depth [mm] 600 – 750750 – 900
Working height [mm] 750900
Material
Bench frame Steel profile 60/25/2 mm
Worktop Depending on requirement
Height-adjustable feet Plastic housing with steel spindle
Loadbearingcapacity
Total [kg] 200
![Page 31: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/31.jpg)
132
Lab
ora
tory
ben
ches
an
ds
inks
SpecialtablesHeight-adjustabletable
3
Intendeduse�� Bench frame with worktop made of various materials as a height-adjustable work surface and storage area for laboratory work�� Supporting construction for analytical equipment and superstructures
Design
Technicaldata
Dimensions
Width [mm] 1200 1500
Depth [mm] 600750900
Working height [mm] 700 – 950
Material
Bench frame Steel profile 60/25/2 mm
Worktop Depending on requirement
Height-adjustable feet Plastic housing with steel spindle
Loadbearingcapacity
Total [kg] 200
Designcharacteristics
Working height Can be adjusted with a grid of 25 mm
Bench frame H-frame
Height-adjustabletable
![Page 32: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/32.jpg)
133
Lab
ora
tory
ben
ches
an
ds
inks
SpecialtablesRoundtable
3
Intendeduse�� For adding to benches with H-frames and C-frames as an additional work surface
Design
Technicaldata
Dimensions
Diameter [mm] 1200
Working height [mm] 750900
Material
Bench frame Steel profile 60/25/2 mm
Worktop Depending on requirement
Height-adjustable feet Plastic housing with steel spindle
Loadbearingcapacity
Round table [kg] 50
Roundtable
![Page 33: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/33.jpg)
134
Lab
ora
tory
ben
ches
an
ds
inks
SpecialtablesSlidingelementSekretär
3
Intendeduse�� Inclined desk that can be moved on a laboratory work bench
Design
Technicaldata
Dimensions
Width [mm] 416
Working height, bench [mm] 900
Max. overall height [mm] 1244
Designcharacteristics
Construction Sliding element on 4 wheelsFastened to a sliding rail on the laboratory work bench with an adjustable writing pad
Material
Sliding element Particle-board with melamine resin facing in walnut veneer
SlidingelementSekretär
![Page 34: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/34.jpg)
135
Lab
ora
tory
ben
ches
an
ds
inks
SpecialtablesSlidingelementAssistent
3
Intendeduse�� Fold-out storage area and desk that can be moved on a laboratory work bench
Design
Technicaldata
Dimensions
Width [mm] 406
Depth [mm] 530
Working height, bench [mm] 900
Loadbearingcapacity
Storage area and desk [kg] 10
Designcharacteristics
Construction Sliding element on 4 wheelsFastened to a sliding rail on the laboratory work benchCan be folded down completely
Material
Sliding element Particle-board with melamine resin facing in walnut veneer
SlidingelementAssistent
![Page 35: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/35.jpg)
136
Lab
ora
tory
ben
ches
an
ds
inks
SpecialtablesSlidingelementProtector
3
Intendeduse�� Protection from splashes and splinters that can be moved on a laboratory work bench
Design
Technicaldata
Dimensions
Width [mm] 406
Working height, bench [mm] 900
Overall height [mm] 1780
Designcharacteristics
Construction Sliding element on 4 wheelsFastened to a sliding rail on the laboratory work bench
Material
Sliding element Particle-board with melamine resin facing in walnut veneer
Splash protection Safety glass
SlidingelementProtector
![Page 36: 3andsinks - WALDNER Lab · BenchwithH-frame 3 Intendeduse Bench frame with worktop made of various materials as a work surface and storage area for laboratory work Supporting construction](https://reader031.vdocument.in/reader031/viewer/2022011913/5faa32360d288735bc6cab48/html5/thumbnails/36.jpg)
137
Lab
ora
tory
ben
ches
an
ds
inks
3