3bk%2d17429%2d9087%2drjzza %289359%2dnpo server and client installation%29 01%2e24 standard june...
TRANSCRIPT
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
1/110
3BK-17429-9087-RJZZA
Wireless Service Provider Solutions
Alcatel-Lucent 9359 Network Performance Optimizer
Server and Client Installation3BK-17429-9087-RJZZA 01.24/EN Standard June 2009
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
2/110
Wireless Service Provider Solutions
Alcatel-Lucent 9359 Network Performance Optimizer
Server and Client InstallationDocument number: 3BK-17429-9087-RJZZADocument issue: 01.24/ENDocument status: StandardProduct release: OAM 5.2Date: June 2009
Alcatel-Lucent - Internal - Proprietary - Use pursuant to Company instruction
Copyright 2007-2009 Alcatel-Lucent, All Rights Reserved
UNCONTROLLED COPY: The master of this document is stored on an electronic database and is "writeprotected"; it may be altered only by authorized persons. While copies may be printed, it is notrecommended. Viewing of the master electronically ensures access to the current issue. Any hardcopiestaken must be regarded as uncontrolled copies.
ALCATEL-LUCENT CONFIDENTIAL: The information contained in this document is the property ofAlcatel-Lucent. Except as expressly authorized in writing by Alcatel-Lucent, the holder shall keep allinformation contained herein confidential, shall disclose the information only to its employees with a needto know, and shall protect the information from disclosure and dissemination to third parties. Except asexpressly authorized in writing by Alcatel-Lucent, the holder is granted no rights to use the informationcontained herein. If you have received this document in error, please notify the sender and destroy itimmediately.
Alcatel-Lucent, Alcatel, Lucent Technologies and their respective logos are trademarks and service marksof Alcatel-Lucent, Alcatel and Lucent Technologies.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.Oracle is a registered trademark of Oracle Corporation and/or its affiliates.
All other trademarks are the property of their owners.
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
3/110
PUBLICATION HISTORYSYSTEM RELEASE NPO 5.2 (M2.3)
June 2009
Issue 01.24/EN, Standard
Resolution of FR 3BKA85FBR278539
February 2009
Issue 01.23/EN, Standard
Resolution of FRs:
3BKA85FBR268088
3BKA85FBR266952
3BKA85FBR269181
3BKA85FBR269331
January 2009
Issue 01.22/EN, Standard
Resolution of FR 3BKA85FBR259762
December 2008
Issue 01.21/EN, Standard
Update after revue of FR 3BKA85FBR257541
December 2008
Issue 01.20/EN, Standard
Resolution of FR 3BKA85FBR258330
December 2008
Issue 01.19/EN, Standard
Update after internal review
October 2008
Issue 01.18/EN, Standard
Resolution of FR 3BKA85FBR257541
October 2008
Issue 01.17/EN, Standard
Publication history 3
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
4/110
Update of Scheduling section
September 2008
Issue 01.16/EN, Standard
Recommendation added : check the appropriate Release Note to apply additional
commands if needed.
September 2008
Issue 01.15/EN, Standard
Conversion from SED DTD to MIR DTD
September 2008
Issue 01.14/EN, Standard
Update after internal review
July 2008
Issue 01.13/EN, Standard
Update due to NPO installation on customer site
Add of Set Recovery Period on NPO
June 2008Issue 01.12/EN, Standard
Update of Start NPO Client Application section
May 2008
Issue 01.11/EN, Preliminary
Improvement of the procedure
April 2008
Issue 01.10/EN, PreliminaryImprovement of the procedure
March 2008
Issue 01.09/EN, Draft
Improvement of the procedure
February 2008
Issue 01.08/EN, Draft
Publication history 4
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
5/110
Improvement of the procedure
February 2008
Issue 01.07/EN, Draft
Improvement of the procedure
February 2008
Issue 01.06/EN, Draft
Improvement of the procedure
January 2008
Issue 01.05/EN, Draft
Improvement of the procedure
January 2008
Issue 01.04/EN, Draft
Improvement of the procedure
November 2007
Issue 01.03/EN, Draft
Improvement of the procedure
October 2007
Issue 01.02/EN, Draft
Improvement of the procedure
October 2007
Issue 01.01/EN, Draft
First official release of document
Version applicable to the Kernel Muse 2.3
Publication history 5
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
6/110
1 About this Publication................................................................................................................................................... 8
2 UMTS Access Network Collection Roadmap...............................................................................................................9
3 New in This Release.....................................................................................................................................................10
4 Overview....................................................................................................................................................................... 11
4.1 Preparation............................................................................................................................................................... 12
4.1.1 Prerequisites...................................................................................................................................................... 13
4.1.2 Applicable Documents........................................................................................................................................14
4.1.3 Site Specific Information................................................................................................................................. 15
4.2 Scheduling................................................................................................................................................................17
4.2.1 SERVER Installation Time in Single Mode.........................................................................................................18
4.2.2 SERVER Installation Time in Cluster Mode....................................................................................................... 19
4.2.3 CLIENT Installation Time................................................................................................................................... 20
4.3 Cases....................................................................................................................................................................... 21
4.4 Resources.................................................................................................................................................................22
4.4.1 Tools...................................................................................................................................................................23
4.4.2 Supplies..............................................................................................................................................................24
5 Scenario........................................................................................................................................................................ 25
5.1 Before Going on Site................................................................................................................................................ 26
5.2 Before You Start....................................................................................................................................................... 27
5.2.1 Checks............................................................................................................................................................... 28
5.2.2 Required Knowledge..........................................................................................................................................29
6 Install Server in Single Mode...................................................................................................................................... 30
6.1 Install Operating System (CD1)................................................................................................................................31
6.2 Install Server Software..............................................................................................................................................35
6.2.1 Create Server Profile..........................................................................................................................................36
6.2.2 Install DVD......................................................................................................................................................... 38
6.2.3 Change in 'tuning_server.pm' File...................................................................................................................... 40
6.2.4 Install CD4..........................................................................................................................................................41
6.2.5 Check Log File................................................................................................................................................... 42
6.2.6 Update Configuration File (Case of OAM5XLarge Profile).................................................................................43
6.3 Post Installation Tasks..............................................................................................................................................44
6.3.1 Reboot the Server.............................................................................................................................................. 45
6.3.2 Install Generic Documentation........................................................................................................................... 46
6.3.3 Start NPO Server Application.............................................................................................................................48
6.3.4 Set Time Zone....................................................................................................................................................50
Table of contents 6
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
7/110
6.3.5 Import UMTS Dictionaries.................................................................................................................................. 51
6.3.6 Set Recovery Period on NPO.............................................................................................................................53
6.3.7 Declare Data Sources........................................................................................................................................ 55
6.3.8 Perform a Full Backup........................................................................................................................................57
7 Install Server in Cluster Mode.....................................................................................................................................58
7.1 Install Operating System (CD1) on the Master Machine.......................................................................................... 59
7.2 Install Operating System (CD1) on the Slave Machine............................................................................................ 63
7.3 Insert the Second HW RAID Controller in SE3510...................................................................................................67
7.4 Connect Fiber channel Links.................................................................................................................................... 68
7.5 Install Software on Master........................................................................................................................................ 69
7.5.1 Create Server Profile..........................................................................................................................................70
7.5.2 Install DVD......................................................................................................................................................... 72
7.5.3 Change in 'tuning_server.pm' File...................................................................................................................... 76
7.5.4 Check Log Files..................................................................................................................................................77
7.5.5 Install CD4..........................................................................................................................................................78
7.5.6 Check Log File................................................................................................................................................... 79
7.5.7 Update Configuration File (Case of OAM5XLarge Profile).................................................................................80
7.6 Install Software on Slave.......................................................................................................................................... 81
7.6.1 Create Server Profile..........................................................................................................................................82
7.6.2 Install DVD......................................................................................................................................................... 84
7.6.3 Check Log Files..................................................................................................................................................87
7.6.4 Install CD4..........................................................................................................................................................88
7.6.5 Check Log File................................................................................................................................................... 89
7.7 Post Installation Tasks..............................................................................................................................................90
8 Install Client..................................................................................................................................................................91
8.1 Customize Windows XP on Client............................................................................................................................ 92
8.1.1 Check Disk Partitions......................................................................................................................................... 938.1.2 Switch to Classic Desktop..................................................................................................................................94
8.1.3 Check RAM Memory.......................................................................................................................................... 95
8.1.4 Switch to Classic Logon..................................................................................................................................... 96
8.1.5 Windows XP Professional Checks..................................................................................................................... 97
8.1.6 Set Internet Explorer Security.......................................................................................................................... 101
8.2 Install Microsoft Office 2003................................................................................................................................... 103
8.3 Check Time Zone................................................................................................................................................... 105
8.4 Start NPO Client Application...................................................................................................................................106
Table of contents 7
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
8/110
1 About this PublicationThis document describes how to install from scratch and how to customize the MS-OMC Portal /
9359-NPO Server and Client machines (Based on Muse 2.3) in single mode and cluster mode
The installation from scratch of the MS-OMC Portal / 9359-NPO machine with its software is
performed with a local CD-ROM or DVD-ROM.
The 9359-NPOHMI case is not covered here.
Audience
This document is intended for:
Field service technicians
Project managers
Site administrators
System support engineers (specialists)
Occasional users (e.g. subcontractors).
Knowledge
You must have a basic understanding of the following:
Alcatel-Lucent operations and maintenance concepts.
MS-OMC Portal / 9359-NPO operations
Solaris 10 operating system
Windows XP Professional
Installation tools and materials
8
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
9/110
2 UMTS Access Network Collection RoadmapFor Alcatel-Lucent support team : to have information about the UMTS Access Document Collection
to which this procedure belongs, refer to UMTS Access Document Collection - Overview and update
summary (NN-20500-050)
9
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
10/110
3 New in This ReleaseThe following sections detail what is new or updated in NPO Server and Client Installation for OAM
5.2 (based on Muse 2.3).
New Sections
Install Server in Cluster Mode
Set Recovery Period on NPO
Check Time Zone
Modified Sections Scheduling
Perform a Full Backup
Start NPO Client Application
10
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
11/110
4 OverviewThe Overview provides information about the scenario and lists the prerequisites and other
information required before installing and commissioning the MS-OMC Portal / 9359-NPO
Server/Client platform.
Preparation
Scheduling
Cases
Resources
ATTENTIONDuring the whole procedure, consult the appropriate and most recent ReleaseNotes : [3] External Release Notes for 9359 NPO OAM5.2 & OAM6.0K, in order toapply additional commands if needed .
11
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
12/110
4.1 PreparationThis section provides information about:
Prerequisites
Applicable Documents
Site Specific Information
12
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
13/110
4.1.1 PrerequisitesThe following prerequisites apply:
For MS-OMC Portal / 9359-NPO installation, one NPO license must be available.
For the future MS-OMC Portal / 9359-NPO Client:
the installation of Windows XP (English or French version) Professional SP2, partition C:(NTFS) must have 4 Gb (minimal size) to 18 Gb (nominal size)
a Windows XP license file must be available
At least one PC must be available in order to run a web browser (for starting MS-OMC Portal/ 9359-NPO via Administration Facilities, etc)
You must have an Internet access.
Inform the operator. An operator's representative must be on site otherwise specifically agreed inwriting.
You must have the [1]Alcatel-Lucent 9359 Network Performance Optimizer - Service ReferenceSheet and the [2] Completion Check List (CCL)document.
All the input listed inSite Specific Informationis available
The hardware machine must be installed and cabled according to:
For V490: [5]Cabling Description for SUN Machinesdocument
For N240: [6]OAM Sun Netra 240 Server Installation and Commissioningdocument. Onlythe procedure described in the "HW cabling" section must be done. The rest (command lines,etc.) must not be done because the DVD1 takes in charge all this configuration.
In case of cluster configuration:
Each StorEdge SE3510 must have ONE HW RAID Controller#the upper one; the second one
should be extracted when the SE3510 is powered-off.
Both Master SFV490 and Slave SFV490 must have the same type of PCI boards in the same
PCI slot number.
V490 # SE3510 FC link #only one FC cable (max 5 m) between the Dual Fiber Channel Host
Bus Adaptor and SE3510 First HW RAID Controller
13
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
14/110
4.1.2 Applicable DocumentsThe following documents apply:
No. Document Title Reference
[1] Alcatel-Lucent 9359 Network Perform-ance Optimizer - Service ReferenceSheet
3BK 17429 9086 RJZZA
[2] Alcatel-Lucent 9359 Network Perform-ance Optimizer - Completion CheckList
3BK 17429 9085 QJZZA
[3] External Release Notes for 9359 NPOOAM 5.2 & OAM6.0K UMT/OAM/DJD/xxxxxx
[4] 9953 MP / NPO Platform Administra-tion Guide
3BK 21315 AAAA PCZZA
[5] Cabling Description for SUN Machines 3BK 17430 4005 RJZZA
[6] OAM Sun Netra 240 Server Installationand Commissioning
24-2002
14
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
15/110
4.1.3 Site Specific InformationBefore starting, ensure that you know the following information about the MS-OMC Portal /9359-NPO
configuration you want to install (refer to the [1] Alcatel-Lucent 9359 Network Performance Optimizer
- Service Reference Sheetdocument).
For anon-clusterconfiguration:
Paramter Server Client(s)
Local Administrator password - X
Root password X -
IP address X X
Hostname X X
Netmask X X
Printer IP address - X
Time zone X X
DNS IP address optional optional
For aclusterconfiguration:
Note: All the IP's used during the installation, including the private ones, must be unique on the
customer network.
Paramter Server Client(s)
Local Administrator password - X
Root password X -
IP address:
private
public
virtual
X X
Floating IP address of the
cluster
X X
IP addressFC Switch X X
Hostname X X
Netmask X X
Default Router IP address X -
Printer IP address - X
Time zone X X
DNS IP address optional optional
15
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
16/110
16
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
17/110
4.2 SchedulingThis section provides information about:
SERVER Installation Time in Single Mode
SERVER Installation Time in Cluster Mode
CLIENT Installation Time
Note: In each table, the number of resources does not take into account individual customer orsafety requirements.
17
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
18/110
4.2.1 SERVER Installation Time in Single ModeThe following tables gives the time required for the server installation in single mode
SERVER tasks Time / Task
Server Installation
From 9h 30min to 12h 30min
Install Operating System(CD1)
1h 10mn
Install Server Software 5h 20 min
Post Installation Tasks From 3h to 6h
18
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
19/110
4.2.2 SERVER Installation Time in Cluster ModeThe following tables gives the time required for the server installation in cluster mode
SERVER tasks in Master Node Time / Task
Master Node Installation
from 8h 10min to 13h 10min
Install Operating System(CD1)
1h 10mn
Install Server Software from 4h to 6h
Post Installation Tasks from 3h to 6h
SERVER tasks in Slave Node Time / Task
Slave Node Installation
from 5h 30mn to 7h 30mn
Install Operating System(CD1)
1h 10mn
Install Server Software from 4h to 6h
Post Installation Tasks 20mn
19
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
20/110
4.2.3 CLIENT Installation TimeThe following tables gives the time required for the client software installation.
CLIENT tasks Time / Task
Client Installation
1h 15mn
Customize Windows XP on cli-ent
1h
Install Microsoft Office 2003 10mn
Check Time Zone 2 min
Start application 5mn
20
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
21/110
4.3 CasesThe following cases may apply
Case 1: Install server
Case 2: Install Client
21
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
22/110
4.4 ResourcesThis section provides information about:
Tools
Supplies
22
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
23/110
4.4.1 ToolsYou must have the following tools
Item Version or Content Case
Windows XP Profes-sional CD-ROM
XP SP2 Client
Microsoft Office CD 2003 Client
CD1 CD-ROM
'CD1_MS_*'
Solaris 10 Server
DVD-ROM'NPO-M 2.3 DVD NPO
2.3 W-NMS OAM05.2'
CD2P_MS_*
CD2S_MS_*
Oracle_solaris*
Oracle_patch_*
Oracle_solaris64_secure_backup*
Oracle_solaris64_clusterware
CD3S_MS_*
OMC_INST_*
CD4_NPO_M3*
Server
CDCD4 CD-ROM
'CD4_NPO_M2*'
CD4_NPO_M2* Server
CD-ROM for GenericDocumentation
GCDM23_* NPO M2.3
On-Line Help OAM05.2
Server
23
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
24/110
4.4.2 SuppliesYou must have the following supplies:
Designation Reference
[1] Alcatel-Lucent 9359 Network PerformanceOptimizer - Service Reference Sheet(completed)
3BK 17429 9086 RJZZA
[2] Completion Check List (CCL) 3BK 17429 9085 RJZZA
24
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
25/110
5 ScenarioThis chapter presents all checks needed before beginning the scenario, and all detailed tasks to be
performed on each site.
25
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
26/110
5.1 Before Going on SiteBefore going on site, check that the following information and supplies are available.
AllPrerequisitesare met.
AllResourcesare available.
The customer has been informed of the:
Date and time
Site name and address
Purpose of operation.
Personnel are available and ready for the operation (refer toSchedulingfor the duration of alloperations)
26
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
27/110
5.2 Before You StartBefore starting, ensure that:
you have performed the requiredChecks
You have theRequired Knowledge
27
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
28/110
5.2.1 ChecksPerform the following checks:
Check that allPrerequisitesare fulfilled
Check the availability of all necessary tools and materials
Inform the operator.
Note: Identify whichCasesapply to you.
28
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
29/110
5.2.2 Required KnowledgeYou must be familiar with the following:
Safety rules and precautions
How to document faults and anomalies
29
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
30/110
6 Install Server in Single ModeThis chapter describes how to install and configure an MS-OMC Portal / 9359-NPO Server in single
mode.
Install Operating System (CD1)
Install Server Software
Post Installation Tasks
30
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
31/110
6.1 Install Operating System (CD1)Use this procedure to install the Operating System (CD1) on the server.
Note: This procedure takes 1h 10mn on the server.
As root, perform the following tasks on the server:
Procedure
Step Action
1. If NPO server has two StorEdge 3510 controllers, verify the controllers configuration by typing:
>>tcsh
>>sscli
>>show conf
If the controllers configuration is incorrect (for example, both controllers are at Primary status or
both are at Secondary status), do as follow :
Unplug the two controllers
Install CD1 without StorEdge 3510 configuration
Plug the upper controller on port 0 (It will be the primary one).
Wait 3 min
Type:
>>reset controller
>>reset nvram
>>shutdown controller
Plug the lower controller on port 4 (It will be the secondary one).
Wait 3 min
Type:
>>reset controller
>>show conf
>>exit
2. Unplug all Ethernet cables except the console or annex one.
3. PressStop + A simultaneously, to display theok prompt on your screen.
31
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
32/110
4. Insert theSolaris 10 CD1 into the drive, and type the following command:>>ok boot cdrom - install
5. Type 'y' if the following message appears:
'StorEdge 3510 is not properly configured, will be prepared!'
'StorEdge configuration will be erased! Are you sure [y/n]?'
6. Enter the following information:
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
33/110
11) Wyse Model 50
12) X Terminal Emulator (xterms)
13) CDE Terminal Emulator (dtterm)
14) Other
Type your choice and press [Enter]
8. TheSystem Identificationwindow opens.
Information about the system appears. Press [F2].
9. TheTime Zone window appears.
To select your default time zone, select [Geographic Continent/Country/Region]. Press [F2].
10. In theContinent and Countrywindow, double-click on the appropriate continent / ocean, Press[F2] and select the corresponding region / country.
Press [F2]
11. The Date and Timewindow appears.
Accept the default values or set the appropriate date and time. Press [F2]
12. In theConfirm Informationwindow, press [F2]
Wait until the message indicating the system configuration disappears.
13. The following message appears:
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
34/110
17. Wait for the installation of the Solaris Operating System to finish.
At the end of the process, a reboot will be automatically performed.
18. Remove the CD1 from the drive:
>>cd /
>>eject
19. Check the CD1 installation log file:
>>cd /var/sadm/system/logs
>>egrep -i 'error |^error' *.log
If some errors appears, check the[3] External Release Notes for 9359 NPO OAM 5.2 &OAM6.0Kdocument.
20. Plug all the cables which were unplugged on step 1
--End--
34
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
35/110
6.2 Install Server SoftwareUse these procedures to install the server software:
Create Server Profile
Install DVD
Change in 'tuning_server.pm' File
Install CD4
Check Log File
Update Configuration File (Case of OAM5XLarge Profile)
35
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
36/110
6.2.1 Create Server ProfileUse this procedure to create a server profile
Note: This procedure takes 5 mn on the server
Procedure
Step Action
1. Using "ftp" with login:axadminand password: omc3, copy the license file (license.xml) into/tmp.
2. Login asrootin the Solaris CDE environment.
3. From/tmpcopy the license file (license.xml) into/install/data.
4. Insert the DVD-ROM in the drive.
5. Open a Terminal window and type:
>>volcheck -v
When the server recognizes the DVD (after about 1 min.), the following message appears:cd /alcatel
>>cp /cdrom/cdrom0/OMC_INST_Mxx_xxxxxx.tar.gz .
>>gzip -cd OMC_INST_Mxx_xxxxxx.tar.gz | tar xvf -
>>cd OMC_INST_Mxx_xxxxxx
>>./gen_profile
Note: Do not edit the 'Server profile' file, it is generated automatically and it should not bemodified.
7. The following information is displayed:
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
37/110
Type the appropriate market then press [Enter]
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
38/110
6.2.2 Install DVDUse this procedure to install the DVD.
Note: This procedure takes 4h 45mn on the server (depending on the hardware and theconfiguration used).
ATTENTION
If "Remote " connection, use rlogin or ssh
Perform the following actions as root:
Procedure
Step Action
1. In the same Terminal window, check the server profile:
>>./server_install -c /var/tmp/server.profile
The File /var/tmp/server.profile seems to be OK message appears.
2. Proceed with the installation:
>>./server_install /var/tmp/server.profile
A list appears with the software to be installed.
The following message appears:
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
39/110
4. Check log files
a. Check the log files from DVD installation
>>cd /var/omc3/install
>>egrep -i " error|^error" *.log
>>cd /alcatel/omc1/var/sadm/install/logs/
>>egrep -i " error|^error" *.log
b. Check the automatic DVD installation log files
>>cd /alcatel/install/log
>>egrep -i " error|^error" *
c. Check Oracle installation log files
>>cd /opt/app/oracle/oraInventory/logs
>>egrep -i " error|^error" *.log
Note: By checking log files, you might find the following errors. Please, ignore them:
ORA-04043, ORA-00942, ORA-02289, ORA-01418, ORA-02303, ORA-27475,ORA-06512, ORA-06550, ORA-01430, ORA-01034,
npo_install.log:ERROR at line 1:
npo_install.log:DROP TYPE ERRORSARRAY
5. Verify the signatures of the DVD software versions:>>more /etc/A1353RA.signature
6. Reboot the server
>>init 6
7. Remove the DVD-ROM from the drive
>>cd /
>>eject
--End--
39
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
40/110
6.2.3 Change in 'tuning_server.pm' FileUse this procedure to perform changes in the 'tuning_server.pm' file
Note: This procedure takes 2 mn on the server.
ATTENTIONPerform this procedure in the following cases only:
- NPO installation for UMTS without Proptima migration
- No migration planned from NPA to the currently installed 9359 NPO
Procedure
Step Action
1. Edit the file /install/data/tuning_server.pm
2. Set the value of the parameter HISTORIC_PARTITION_CREATION=FALSE
3. Save the file and close the editor.
4. Run as oracle user the following script:
>>su - oracle
>>cd /alcatel/omc{instance_number}/OMC_DBCF/dba_scripts
>>./configure_tuning_pm.sh
5. To exit from Oracle, type:
>>$ exit
--End--
40
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
41/110
6.2.4 Install CD4Use this procedure to install the CD4 software.
Note: This procedure takes 10 min on the server.
ATTENTION
If "Remote " connection, use only ssh, do not use telnet or rlogin.
Procedure
Step Action
1. Insert the CD4 in the drive
2. Launch the CD4 installation:
>>cd /cdrom/cdrom0
>>./install.sh
The following message appears:
cd /
>>eject
--End--
41
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
42/110
6.2.5 Check Log FileUse this procedure to check the CD4 log files.
Note: This procedure takes 5 min on the server.
ATTENTION
If "Remote " connection, use only ssh, do not use telnet or rlogin.
Procedure
Step Action
1. Perform the following actions asroot, if some errors appear, check the [3]External ReleaseNotes for 9359 NPO OAM 5.2 & OAM6.0Kdocument
2. Check the CD4 log file:
>>cd /var/sadm/install/logs
>>egrep -i " error|^error" *CD4_install*
--End--
42
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
43/110
6.2.6 Update Configuration File (Case of OAM5XLarge Profile)Use this procedure to update the configuration file in case of OAM5XLarge profile.
Procedure
Step Action
1. Insert the CD4 in the drive
2. Type :
>>cd /cdrom/cdrom0/patch
>>./tuneNonClusterGL.sh
3. Remove the CD4 from the drive:
>>cd /
>>eject
--End--
43
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
44/110
6.3 Post Installation TasksThis section describes the tasks to be performed after the server software is installed:
Reboot the Server
Install Generic Documentation
Start NPO Server Application
Set Time Zone
Import UMTS Dictionaries
Set Recovery Period on NPO
Declare Data Sources Perform a Full Backup
44
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
45/110
6.3.1 Reboot the ServerUse this procedure to reboot the server
Procedure
Step Action
1. Asroot, launch the command:
>>init 6
2. Wait around5 min for the Server to come up.
--End--
45
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
46/110
6.3.2 Install Generic DocumentationUse this procedure to install the generic documentation
Note: This procedure takes 15 mn.
ATTENTION
If "Remote " connection, use only ssh, do not use telnet or rlogin.
As root, perform the following tasks on the Server:
Procedure
Step Action
1. Insert the documentation CD-ROM
2. Change the current directory:
>>cd /cdrom/cdrom0
3. Remove the documentation:
Note: When launching the removal, some files cannot be accessed and cause 2 errormessages, do not take them into account.
>>./remove_muse_doc
./install_muse_doc
The documents are installed in/alcatel/docs/21368/data/collectiondirectory.
5. Remove the CD-ROM from the drive:
>>cd /
>>eject
--End--
46
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
47/110
47
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
48/110
6.3.3 Start NPO Server ApplicationUse this procedure to start the NPO server application
Note: This procedure takes 15 min on the server
ATTENTION
If "Remote " connection, use only ssh, do not use telnet or rlogin.
Procedure
Step Action
1. Log in asroot
2. Open a "Terminal" window.
3. Launch the Firefox browser from the server:
>>cd /usr/local/firefox>>./firefox
If "Alert" pop-up window appears, click [OK].
4. In the URL bar, type the following address:
http:///osm/admin
5. In the Prompt window:
For Username, typeosmadmin
For Password, typealcatel
Click [OK]
6. In "Process Monitoring" window, select:
Processes -> Start All
"Confirmation: do you want to start the system ?" Click [OK]
7. Wait all leds become green.
8. Close the Firefox browser.
48
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
49/110
--End--
49
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
50/110
6.3.4 Set Time ZoneUse this procedure to set the time zone
Note: This procedure takes 2 min on the server
ATTENTION
If "Remote " connection, use only ssh, do not use telnet or rlogin.
Procedure
Step Action
1. Open theTerminalwindow.
2. Set up the time zone:
>>su - oracle
To display the {TimeZone} initialized during CD1 installation, type:
>>echo $TZ
Then type:
>>cd /alcatel/muse/MUSE_CONFIG/scripts
>>./updateTimeZone {TimeZone}
where {TimeZone} is the time zone initialized when installing CD1.
Example:
./updateTimeZone Europe/Bucharest
3. To exit from Oracle, type:
>>$ exit
--End--
50
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
51/110
6.3.5 Import UMTS DictionariesUse this procedure to import the UMTS Dictionaries
Note: This procedure takes from 2h to 4h on the server (depending to the configuration)
ATTENTION
If "Remote " connection, use only ssh, do not use telnet or rlogin.
Procedure
Step Action
1. Change in 'offlinetool.properties' file
Note: This change in "offlinetool.properties" file is to be made ONLY if you are not doing amigration from RNO/NPA.
a. Edit the file:
/alcatel/muse/MUSE_QOS/offlinetool/config/offlinetool.properties
b. Set the value of the parameter muse.offlinetool.historic.partition=FALSE
c. Save the file and close the editor.
2. Import dictionaries
a. Insert the CD4 in the drive
b. Log in asroot
c. Launch the Import dictionaries:
>>cd /cdrom/cdrom0
>>./umtsfullinstall.sh
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
52/110
At the end of all imports, the traces must be checked for errors before continuing. If some errors
appears, check the [3] External Release Notes for 9359 NPO OAM 5.2 & OAM6.0Kdocument.
a. For Parameters:
>>cd /alcatel/temp/data/trace/
>>grep -i " error" RTP_Offline__0.traces
b. For Counters/Indicators:
>>cd /alcatel/temp/data/trace
>>grep -i " error" OT__0.traces
c. Another file can be checked:
/var/sadm/install/logs/MUSE_UMTS_CD4_UMTSfullinstall_log_
>>grep -i " error" MUSE_UMTS_CD4_UMTSfullinstall_log_
4. Remove the DVD from the drive
>>cd /
>>eject
--End--
52
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
53/110
6.3.6 Set Recovery Period on NPOUse this procedure to set the recovery period on NPO.
Note: This procedure takes 5 min on the server.
If you manage to perform a migration from PrOptima to NPO, it is recommended to follow the
advices below , if it is not the case go to step 1
For the migration, it is advized to choose a migration end date equal to SUNDAY (in order to migrate
a full week at the end of the period). Then, taking into account this advice, the data source should be
declared so that data import should start the MONDAY (just after SUNDAY ). This is in order to keep
data continuity.
Example 1
Migration End Date = SUNDAY ()
If Datasource Declaration Date is done on the next THURSDAY (+4) , we should set the
parameter MAX_PREVIOUS_DAYS =3 so that data import will start on the MONDAY (+1).
Example 2
Migration End Date = SUNDAY ()
If Datasource Declaration Date is done on the next TUESDAY (+2) , we should set the parameter
MAX_PREVIOUS_DAYS =1 so that data import will start on the MONDAY (+1).
In case these recommendations are not followed, the week data covering both End of migration
Period and Beginning of QoS import Period would not be reliable (empty or incomplete) after
migration.
To set the MAX_PREVIOUS_DAYS , follow the steps below :
Procedure
Step Action
1. Open aTerminalwindow as root.
2. Type:
>>cd /alcatel/muse/MUSE_QOS/loader/genericloader
>>vi GenericLoader.properties
Set the parameterMAX_PREVIOUS_DAYS
Note: In case of cluster configuration, MAX_PREVIOUS_DAYS should be set in both
53
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
54/110
master and slave nodes
--End--
54
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
55/110
6.3.7 Declare Data SourcesUse this procedure to declare the data sources
Note: This procedure takes 10 min per each data source on the server
ATTENTION
If "Remote " connection, use only ssh, do not use telnet or rlogin.
ATTENTION
To be sure to have the latest topology, it is recommended to import manually the
parameters or to wait for the day after before declaring data source
Data sources for Parameters, RNP, QoS, Tuning or Supervision must be declared.
Procedure
Step Action
1. Open a "Terminal" window as root.
2. Launch the Firefox browser from the server:
>>cd /usr/local/firefox
>>./firefox
If "Alert" pop-up window appears, click [OK].
3. In the URL bar, type the following address:
>>http://{Server_IP_addres}:8190/museadmin/jsp/>>common/Datamgnt_HomePage.jsp
4. Log in asosmadmin(default password: alcatel).
5. Refer to document [4]9953 MP / NPO Platform Administration Guide, to declare the datasources.
6. Close the Firefox browser.
55
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
56/110
7. Close the "Terminal" window.
--End--
56
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
57/110
6.3.8 Perform a Full BackupNote: This procedure takes at least 1h 30 min on the server
It is recommended to perform a backup after the NPO installation . Several backup / restore solutions
are available. Using one or the other depends on your hardware configuration.
All the information to choose those backup solutions is available in the [3] External Release Notes for
9359 NPO OAM 5.2 & OAM6.0K.
Procedure
Step Action
1. Refer to [3] External Release Notes for 9359 NPO OAM 5.2 & OAM6.0K
2. Perform the full backup referring to [4]9953 MP / NPO Platform Administration Guide
3. If you choose the OSB, Legato or Centralized Backup with Media Manager, check theincremental backup scheduling of the next days using the [4]9953 MP / NPO PlatformAdministration Guidedocument.
--End--
57
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
58/110
7 Install Server in Cluster ModeThis chapter describes how to install and configure an MS-OMC Portal / 9359-NPO Server in
cluster mode:
Install Operating System (CD1) on the Master Machine
Install Operating System (CD1) on the Slave Machine
Insert the Second HW RAID Controller in SE3510
Connect Fiber channel Links
Install Software on Master
Install Software on Slave
Post Installation Tasks
The installations of the Master node and Slave node can be done in parallel.
58
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
59/110
7.1 Install Operating System (CD1) on the Master MachineUse this procedure to install the Operating System (CD1) on the Master machine.
Note: This procedure takes 1h 10mn on the server.
Install the operating system (DVD1):
Procedure
Step Action
1. Refer to theCabling Description for SUN Machinesdocument, chapterFiber Channel SwitchConfigurationto connect HBA of the master to Storage Array.
2. If the master machine has two StorEdge 3510 controllers then refer to step 1 ofInstall OperatingSystem (DVD1)to check the controllers status .
3. PressStop + A simultaneously, to display theok prompt on your screen.
4. Insert theSolaris 10 CD1 into the drive, and type the following command:
>>ok boot cdrom - install
5. Type 'y' if the following message appears:
'StorEdge 3510 is not properly configured, will be prepared!'
'StorEdge configuration will be erased! Are you sure [y/n]?'
6. Enter the following information:
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
60/110
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
61/110
Accept the default values or set the appropriate date and time. Press [F2].
12. In theConfirm Informationwindow, press [F2].
Wait until the message indicating the system configuration disappears.
13. The following message appears:
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
62/110
19. Check the CD1 installation log file:cd /var/sadm/system/logs/se3510.logfor errors and the file must end with:
(20.05.2008 17:08:54) Building new filesystems on new disks
(20.05.2008 17:08:54) Mouting filesystems and updating vfstab
(20.05.2008 17:08:54) End of StorEdge 3510 setup
>>cd /var/sadm/system/logs
>>egrep -i 'error |^error' *.log
>>egrep -i " fail|^fail" *.log
>>more time.log
Check speed end duplex of the Ethernet interface
>>netstat -nrv
>>netstat -i
>>dladm show-dev
If some errors appears, check the[3] External Release Notes for 9359 NPO OAM 5.2 &
OAM6.0Kdocument.
--End--
62
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
63/110
7.2 Install Operating System (CD1) on the Slave MachineUse this procedure to install the Operating System (CD1) on the Slave machine.
Note: This procedure takes 1h 10mn on the server.
Install the operating system (CD1):
Procedure
Step Action
1. If the slave machine has two StorEdge 3510 controllers then refer to step 1 ofInstall OperatingSystem (CD1)to check the controllers status.
2. PressStop + A simultaneously, to display theok prompt on your screen.
3. Insert theSolaris 10 CD1 into the drive, and type the following command:
>>ok boot cdrom - install
4. Type 'y' if the following message appears:
'StorEdge 3510 is not properly configured, will be prepared!'
'StorEdge configuration will be erased! Are you sure [y/n]?'
5. Enter the following information:
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
64/110
6. The following message may appear:
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
65/110
Wait until the message indicating the system configuration disappears.
12. The following message appears:
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
66/110
At the end of the process, a reboot will be automatically performed
17. Remove the CD1 from the drive:
>>cd /
>>eject
18. Check the CD1 installation log file:
>>cd /var/sadm/system/logs
>>egrep -i 'error |^error' *.log
If some errors appears, check the[3] External Release Notes for 9359 NPO OAM 5.2 &
OAM6.0Kdocument.
--End--
66
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
67/110
7.3 Insert the Second HW RAID Controller in SE3510Use this procedure to insert the second HW RAID controller in SE3510.
Procedure
Step Action
1. Insert the second HW RAID controller in each SE3510 linked to Master and Slave
Wait 15 minutes till the Activity LED on the second controller stays green.
2. From the local console of each SFV490, type as root user:
>>sccli
>>sh red
The last line of the output should be:
cd /var/sadm/system/logs
>>egrep -i " error|^error" *.log
4.
--End--
67
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
68/110
7.4 Connect Fiber channel LinksRefer the chapterFiber Channel Switch Configuration in theCabling Description for SUN
Machinesdocument, to connect the master, slave and the 2 Storage Arrays to the FC switch.
On both master and slave machines check as root user that both Storage Arrays are visible:
>>sccli -l
/dev/rdsk/c8t600C0FF0000000000988643F27043500d0s2 SUN StorEdge 3510 SN#098864
/dev/rdsk/c8t600C0FF0000000000A7DB105D5BA3500d0s2 SUN StorEdge 3510 SN#0A7DB1
Note: Both master and slave should have the same disk arrays reference (for example:/dev/rdsk/c8).
68
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
69/110
7.5 Install Software on MasterThese procedures describe how to install the software on the Master machine.
Create Server Profile
Install DVD
Change in 'tuning_server.pm' File
Check Log Files
Install CD4
Check Log File
Update Configuration File (Case of OAM5XLarge Profile)
69
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
70/110
7.5.1 Create Server ProfileUse this procedure to create a server profile
Note: This procedure takes 5 mn on the server
Procedure
Step Action
1. Using "ftp" with login:axadminand password: omc3, copy the license file (license.xml) into/tmp.
2. Login asrootin the Solaris CDE environment.
3. From/tmpcopy the license file (license.xml) into/install/data.
4. Insert the DVD-ROM in the drive.
5. Open a Terminal window and type:
>>volcheck -v
When the server recognizes the DVD (after about 1 min.), the following message appears:cd /alcatel
>>cp /cdrom/cdrom0/OMC_INST_Mxx_xxxxxx.tar.gz .
>>gzip -cd OMC_INST_Mxx_xxxxxx.tar.gz | tar xvf -
>>cd OMC_INST_Mxx_xxxxxx
>>./gen_profile
Note: Do not edit the 'Server profile' file, it is automatically generated and it should not bemodified.
7. The following information is displayed:
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
71/110
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
72/110
7.5.2 Install DVDUse this procedure to install the DVD.
Note: This procedure takes 3h 15 mn to 3h 45 mn on the server (depending on the hardware andthe configuration used).
Perform the following actions as root
Procedure
Step Action
1. Edit the file/var/tmp/server.profileas follows:
THIRD_PARTIESY
PATCHESY
ORACLE_CLUSTERN
ORACLE_DISK1N
ORACLE_PATCHN
ORACLE_BACKUPN
MS_PORTALN
2. If necessary, enter the following command:
>>cd /alcatel/ OMC_INST_Mxx_xxxxxx
Run the following script to install CD2P and CD2S:
>>./server_install -V /var/tmp/server.profile
If only one StorEdge3510 is connected to Master, the following question appears:
>>Is this MASTER installed for add-node scenario? (yes/no)
In case of installation from scratch, answerno and script will exit. For add-node scenario, type
yes
A list appears with the software to be installed.
The following message appears:
Do you want to continue?
Confirm withyes if the list is correct.
3. Edit again the file/var/tmp/server.profileas follows:
THIRD_PARTIESN
72
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
73/110
PATCHESN
ORACLE_CLUSTERY
ORACLE_DISK1N
ORACLE_PATCHN
ORACLE_BACKUPN
MS_PORTALN
4. If necessary, enter the following command:
>>cd /alcatel/ OMC_INST_Mxx_xxxxxx
Proceed with the installation:
>>./server_install -V /var/tmp/server.profile
If only one StorEdge3510 is connected to Master, the following question appears:
>>Is this MASTER installed for add-node scenario? (yes/no)
In case of installation from scratch, answer no and script will exit. For add-node scenario, type
yes
A list appears with the software to be installed.
mkdir EP_5-20090626-WMS_OAM52-NPO600_W23D19U4
>>cd /alcatel/tmp/EP_5-20090626-WMS_OAM52-NPO600_W23D19U4
Put EP_5-20090626-WMS_OAM52-NPO600_W23D19U4.tar in this directory
>>cksum EP_5-20090626-WMS_OAM52-NPO600_W23D19U4.tar
tar xvf EP_5-20090626-WMS_OAM52-NPO600_W23D19U4.tar
73
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
74/110
>>dos2unix config_private_vip.sh config_private_vip.sh
>>chmod 777 config_private_vip.sh
>>./ config_private_vip.sh
Wait till the script is finished.
>>ifconfig -a
8. Edit again the file/var/tmp/server.profileas follows:
THIRD_PARTIESN
PATCHESN
ORACLE_CLUSTERN
ORACLE_DISK1Y
ORACLE_PATCHY
ORACLE_BACKUPN
MS_PORTALY
9. If necessary, enter the following command:
>>cd /alcatel/ OMC_INST_Mxx_xxxxxx
Proceed with the installation:
>>./server_install -V /var/tmp/server.profile
If only one StorEdge3510 is connected to Master, the following question appears:
>>Is this MASTER installed for add-node scenario? (yes/no)
In case of installation from scratch, answer no and script will exit. For add-node scenario, type
yes
A list appears with the software to be installed.
/dev/null
This correction will avoid the multiple run of clean Process.sh (clean Process.sh started many
times).
11. Remove the DVD-ROM from the drive.
>>cd /alcatel/OMC_INST_Mxx_xxxxxx
>>./eject_dvd
74
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
75/110
12. As rootuser, configure NTP:>>/alcatel/OMC_INST_/unix/scripts/update_ntp.sh/
is the number of the active instance on the machine
13. Reboot the Master
>>init 6
--End--
75
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
76/110
7.5.3 Change in 'tuning_server.pm' FileUse this procedure to perform changes in the 'tuning_server.pm' file
Note: This procedure takes 2 mn on the server.
ATTENTIONPerform this procedure in the following cases only:
- NPO installation for UMTS without Proptima migration
- No migration planned from NPA to the currently installed 9359 NPO
Procedure
Step Action
1. Edit the file/install/data/tuning_server.pm
2. Set the value of the parameter HISTORIC_PARTITION_CREATION=FALSE
3. Save the file and close the editor.
4. Run as oracle user the following script:
>>su - oracle
>>cd /alcatel/omc{instance_number}/OMC_DBCF/dba_scripts
>>./configure_tuning_pm.sh
5. To exit from Oracle, type:
>>$ exit
--End--
76
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
77/110
7.5.4 Check Log FilesUse this procedure to check log files on the server
Note: This procedure takes 5 mn on the server.
ATTENTION
If "Remote " connection, use only ssh, do not use telnet or rlogin.
Perform the following actions asroot. If some errors appear, check the [3]External Release Notes
for 9359 NPO OAM 5.2 & OAM6.0Kdocument.
Note: There are errors generated by Oracle scripts trying to drop not existing table: please ignorethem
Procedure
Step Action
1. Check the log files from DVD installation>>cd /var/omc3/install
>>egrep -i " error|^error" *.log
>>egrep -i " fail|^fail" *.log
>>cd /alcatel/omc1/var/sadm/install/logs/
>>egrep -i " error|^error" *.log
2. Check the automatic DVD installation log files:
>>cd /alcatel/install/log
>>egrep -i " error|^error" *
3. Check Oracle installation log files:>>cd /opt/app/oracle/oraInventory/logs
>>egrep -i " error|^error" *.log
--End--
77
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
78/110
7.5.5 Install CD4Use this procedure to install the CD4 software.
Note: This procedure takes 10 min on the server.
ATTENTION
If "Remote " connection, use only ssh, do not use telnet or rlogin.
Procedure
Step Action
1. Insert the CD4 in the drive
2. Launch the CD4 installation:
>>cd /cdrom/cdrom0
>>./install.sh
The following message appears:
cd /
>>eject
--End--
78
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
79/110
7.5.6 Check Log FileUSe this procedure to check the CD4 log files.
Note: This procedure takes 5 min on the server.
ATTENTION
If "Remote " connection, use only ssh, do not use telnet or rlogin.
Procedure
Step Action
1. Perform the following actions asroot, if some errors appear, check the [3]External ReleaseNotes for 9359 NPO OAM 5.2 & OAM6.0Kdocument
2. Check the CD4 log file:
>>cd /var/sadm/install/logs
>>egrep -i " error|^error" *CD4_install*
--End--
79
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
80/110
7.5.7 Update Configuration File (Case of OAM5XLarge Profile)Use this procedure to update the configuration file in case of OAM5XLarge profile.
Perform the following commands as root:
Procedure
Step Action
1. Insert the CD4 in the drive
2. Type :
>>cd /cdrom/cdrom0/patch
>>./tuneNonClusterGL.sh
3. Remove the CD4 from the drive:
>>cd /
>>eject
--End--
80
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
81/110
7.6 Install Software on SlaveThese procedures describe how to install the software on the Slave machine.
Create Server Profile
Install DVD
Check Log Files
Install CD4
Check Log File
81
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
82/110
7.6.1 Create Server ProfileUse this procedure to create a server profile
Note: This procedure takes 5 mn on the server
Procedure
Step Action
1. Using "ftp" with login:axadminand password: omc3, copy the license file (license.xml) whichcontains the master and the slave hostid into/tmp.
2. Login asrootin the Solaris CDE environment.
3. From/tmpcopy the license file (license.xml) into/install/data.
4. Insert the DVD-ROM in the drive.
5. Open a Terminal window and type:
>>volcheck -v
When the server recognizes the DVD (after about 1 min.), the following message appears:cd /alcatel
>>cp /cdrom/cdrom0/OMC_INST_Mxx_xxxxxx.tar.gz .
>>gzip -cd OMC_INST_Mxx_xxxxxx.tar.gz | tar xvf -
>>cd OMC_INST_Mxx_xxxxxx
>>./gen_profile
Note: Do not edit the 'Server profile' file, it is automatically generated and it should not bemodified.
7. The following information is displayed:
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
83/110
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
84/110
7.6.2 Install DVDUse this procedure to install the DVD.
Note: This procedure takes 3h 15 mn to 3h 45 mn on the server (depending on the hardware andthe configuration used).
Perform the following actions as root
Procedure
Step Action
1. Edit the file/var/tmp/server.profileas follows:
THIRD_PARTIESY
PATCHESY
ORACLE_CLUSTERN
ORACLE_DISK1N
ORACLE_PATCHN
ORACLE_BACKUPN
MS_PORTALN
2. If necessary, enter the following command:
>>cd /alcatel/ OMC_INST_Mxx_xxxxxx
Run the following script to install CD2P and CD2S:
>>./server_install -V /var/tmp/server.profile
A list appears with the software to be installed.
The following message appears:
Do you want to continue?
Confirm withyes if the list is correct.
3. Edit again the file/var/tmp/server.profileas follows
THIRD_PARTIESN
PATCHESN
ORACLE_CLUSTERN
ORACLE_DISK1N
ORACLE_PATCHN
84
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
85/110
ORACLE_BACKUPN
MS_PORTALY
4. If necessary, enter the following command:
>>cd /alcatel/ OMC_INST_Mxx_xxxxxx
Proceed with the installation:
>>./server_install -V /var/tmp/server.profile
A list appears with the software to be installed.
The following message appears:/alcatel/OMC_INST_/unix/scripts/update_ntp.sh
is the number of the active instance on the machine
10. Edit the file getssh from /alcatel/muse/MUSE_QOS/bin/
Replace the line:ssh $i > /dev/null withssh $i exit > /dev/null
85
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
86/110
This correction will avoid the multiple run of clean Process.sh (clean Process.sh started many
times).
11. Reboot the Master
>>init 6
--End--
86
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
87/110
7.6.3 Check Log FilesUse this procedure to check log files on the server
Note: This procedure takes 5 mn on the server.
ATTENTION
If "Remote " connection, use only ssh, do not use telnet or rlogin.
Perform the following actions asroot. If some errors appear, check the [3]External Release Notes
for 9359 NPO OAM 5.2 & OAM6.0Kdocument.
Note: There are errors generated by Oracle scripts trying to drop not existing table: please ignorethem
Procedure
Step Action
1. Check the log files from DVD installation>>cd /var/omc3/install
>>egrep -i " error|^error" *.log
>>egrep -i " fail|^fail" *.log
>>cd /alcatel/omc1/var/sadm/install/logs/
>>egrep -i " error|^error" *.log
2. Check the automatic DVD installation log files:
>>cd /alcatel/install/log
>>egrep -i " error|^error" *
3. Check Oracle installation log files:>>cd /opt/app/oracle/oraInventory/logs
>>egrep -i " error|^error" *.log
--End--
87
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
88/110
7.6.4 Install CD4Use this procedure to install the CD4 software.
Note: This procedure takes 10 min on the server.
ATTENTION
If "Remote " connection, use only ssh, do not use telnet or rlogin.
Procedure
Step Action
1. Insert the CD4 in the drive
2. Launch the CD4 installation:
>>cd /cdrom/cdrom0
>>./install.sh
The following message appears:
cd /
>>eject
--End--
88
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
89/110
7.6.5 Check Log FileUSe this procedure to check the CD4 log files.
Note: This procedure takes 5 min on the server.
ATTENTION
If "Remote " connection, use only ssh, do not use telnet or rlogin.
Procedure
Step Action
1. Perform the following actions asroot, if some errors appear, check the [3]External ReleaseNotes for 9359 NPO OAM 5.2 & OAM6.0Kdocument
2. Check the CD4 log file:
>>cd /var/sadm/install/logs
>>egrep -i " error|^error" *CD4_install*
--End--
89
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
90/110
7.7 Post Installation TasksThis procedure describes the tasks to be performed on both Master and Slave machines after the
installation in cluster mode.
Procedure
Step Action
1. Edit the file/alcatel/omc1/OMC_LOCAL/config/logim/jacorb.propertiesand replace the with the
2. Edit the file/alcatel/muse/MUSE_COMMON/config/jacorb.propertiesand replace 127.0.0.1with the Floating IP of the cluster.
3. Only if the cluster is installed from scratch, activate the cluster monitoring:
>>cd /alcatel/omc/CLUSTER
>>./activate_monitoring start
--End--
On themastermachine, perform all the steps described in sectionPost Installation Tasksof thechapter Install Server in Single Mode.
Onslavemachine, perform the following sections from the chapter Install Server in Single Mode:
Reboot the Server
Install Generic Documentation
90
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
91/110
8 Install ClientThis chapter describes how to install an MS-OMC Portal / 9359-NPO Client.
Customize Windows XP on Client
Install Microsoft Office 2003
Check Time Zone
Start NPO Client Application
91
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
92/110
8.1 Customize Windows XP on ClientThe Client must be installed with Windows XP (English or French version) Service Pack 2.
Use this procedure to configure Windows XP Service Pack 2.
Check Disk Partitions
Switch to Classic Desktop
Check RAM Memory
Switch to Classic Logon
Windows XP Professional Checks
Set Internet Explorer SecurityNote: Before configuring the Client workstation, the Server must be already installed andconfigured.
92
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
93/110
8.1.1 Check Disk PartitionsUse this procedure to check the disk partition.
Note: This procedure takes 2 min on the Client
Procedure
Step Action
1. Right-click on theC: diskand select Properties.
2. Ensure theC: diskNTFS type and has from 4 Gb (minimal size) to 18Gb (nominal size).
--End--
93
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
94/110
8.1.2 Switch to Classic DesktopUse this procedure to switch to the classic desktop
Note: This procedure takes 2 min on the Client
Procedure
Step Action
1. Log in asadministrator
Note: Not needed to log in as Administrator user name, but needs to have administratorrights.
2. Close theManage Your Serverwindow. (this window is not always displayed, depending on thecurrent PC)
3. Right-click on the task bar from the desktop bottom and selectProperties.
4. Click on theStart Menu tab.
5. Select theClassic Start menu option.
6. Click [OK].
--End--
94
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
95/110
8.1.3 Check RAM MemoryUse this procedure to check the RAM memory
Note: This procedure takes 2 min on the Client
Procedure
Step Action
1. Select:Start
> Settings
> Control Panel
> System
2. SelectGeneraltab and verify that the RAM memory has from 1 Gb (minimal size) to 2 Gb(nominal size).
--End--
95
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
96/110
8.1.4 Switch to Classic LogonUse this procedure to switch to Classic Logon
Note: This procedure takes 5 min on the Client
Procedure
Step Action
1. Select:Start
> Run
2. Typegpedit.mscand click [OK]
3. Select:Computer Configuration> Administrative Templates> System> Logon
4. In the right window, click on theStandardtab.
5. Right-click onAlways use classic logonand selectProperties
6. In theSettingtab, selectEnabledand click [OK].
7. Close theGroup Policywindow.
--End--
96
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
97/110
8.1.5 Windows XP Professional ChecksUse this procedure to check Windows XP Professional configuration data.
Note: This procedure takes 5 min on the Client
Procedure
Step Action
1. Check the configuration and memory size on the Client PC:
a. From the desktop, follow the path:
Start -> Programs -> Accessories -> System Tools -> System Information
b. In the opened window, ensure of the following:
OS name: 'Microsoft Windows XP Professional'
Version: '... Service Pack 2 Build ...'
Total Physical Memory: Equal or above 1GB
c. Close theSystem Informationwindow.
2. Update the paging file size
a. From the desktop, select:
Start -> Settings -> Control Panel
TheControl Panelopens.
b. Double-click on [System]
TheSystem Propertieswindow opens.
c. Click on theAdvancedtab.
d. In thePerformance field, click [Settings].
ThePerformance Options window opens.
e. Click on theAdvancedtab.
f. In theVirtual memory field, click [Change]
97
Copyright 2007-2009 Alcatel-Lucent Server and Client Installation
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
98/110
TheVirtual Memorywindow opens.
g. For theInitial size (MB)and Maximum size (MB)set the value to 2048.
h. Click [Set]
i. Click [OK]
If theSystem Control Panel Appletwindow opens. Click [OK] to close it.
j. Click [OK] to close thePerformance Optionswindow.
k. Click [OK] to close theSystem Propertieswindow.
If theSystem Settings Changewindow opens, click [Yes] to reset the computer.
After the system is started, log in asAdministrator
3. Customize and verify the network parameters
Note: This procedure takes 5 min on the Client
a. Select
Start -> Settings -> Control Panel -> Network Connections
b. In theNetwork Connectionswindow, right-click on the [Local Area Connection] icon andselectProperties
c. In theLocal Area Connection Properties window:
SelectInternet Protocol (TCP/IP)
SelectProperties
d. In theInternet Protocol (TCP/IP) Properties window:
Check ifUse the following IP address: is selected. Else, select it.
If necessary, modify the value for IP Address, Subnet masks and Default gateway
Refer to the [1]Alcatel-Lucent 9359 Network Performance Optimizer - Service Reference
Sheetdocument for the exact values.
Note: If the client pc gets its IP from DHCP server, selectObtain an IP adressautomatically.
e. Click [OK]
f. In theLocal Area Connections Properties window, click [OK]
98
3BK-17429-9087-RJZZA 01.24/EN Standard June 2009 Copyright 2007-2009 Alcatel-Lucent
-
8/14/2019 3BK%2D17429%2D9087%2DRJZZA %289359%2DNPO Server and Client Installation%29 01%2E24 Standard June 2
99/110
g. Close theNetwork Connectionswindow
4. Verify the date and time
Note: This procedure takes 2 min on the Client
a. Select:
Start -> Settings -> Control Panel
b. In theControl Panel window, double-click on theDate and Time icon.
c. Verify the date, time and time zone. If necessary, adjust them to the values set for the NPOserver
d. Click [OK] to close theDate and Time Propertieswindow.
5. Verify the regional and language options
Note: This procedure takes 2 min on the Client
a. In theControl Panel window, double click on theRegional and Language Options icon.
b. In theRegional Options tab, selectEnglish (United States)if English version orFranais(France) if French version.
c. SelectCustomize
d. In theCustomize Regional Optionswindow, in theNumberstab, ensure that:
The '.' character appe