© 2019 PMK GmbH

3D Probe Positioners

Key Features:

nAccurate and

Safe Positioning

n3D Stepless Clamping

System

nHands-Free Measuring and

Testing

PMKs 3D Probe-Positioning System provides a reliable third hand to your daily testing and measuring

applications. Typically used for permanent and semi-permanent setups it can be used for

demonstrations as well as safe and accurate positioning in general. Especially when using a number

of probes and sensors on a single DUT you dont want to miss its flexibilty and simple handling on

one hand and their sturdiness and fixation capabilities on the other hand. Accurate Probe-Clamping

Systems like the Uniholder give the user even more room for creativity and possibilities for setting up

custom test and measuring environments.

Probe-Positioning Systems

© 2019 PMK GmbH

2

3D Positioners

Datasheet

Assembled within seconds

The Probe-Positioning System consists of three parts:

Base, positioner and probe holder.

It is assembled within seconds using the 7 mm wrench

enclosed in the scope of delivery.

Stepless adjustment

PMK 3D Probe Positioners are infinitely adjustable.

The mechanical clamping system makes it possible to

position the probing device accurately and easily.

The three joints of the 3D Probe Positioner can be fixed

and released with a single turn of the tensioning knob.

Accurate and safe positioning

All PMK Probe positioning systems are ideal for semi-

permanent measurments. The setup is fast and easy

offering greatest flexibility for your every day measuring

tasks.

Universal usage

The PMK 3D Positioning System can be altered to fit

different test applications. The customer may choose from

four different Bases: Steel Base, Table clamp magnetic

foot and vacuum cup aswell as different arm lengths of

130 and 200 mm.

The Probe-Holders are interchangeable too.

You may choose between the 3-Fold-Holder or Uniholder,

wich is not only capable of holding any 2.5 mm and 5.0

mm standard probes, but almost any measuring device up

to a clamping width of 17 mm. Twinholder is designed to

hold 4 mm Bananaplugs and similar measuring leads..

© 2019 PMK GmbH

3

3D Positioners

Datasheet

Flexibility from the Base up

PMKs 3D Positioning Systems are available with four diffe-

rent kinds of bases:

The Steel Base; sufficient for most Setups it provides

solid footing even for 200 mm arms.

The Table Clamp accepts two arms by default and is very

effective if a suitable place for clamping of not more than

40 mm thickness is avalable.

STS 100(893-100-001)

TIK 40(893-100-002)

© 2019 PMK GmbH

4

3D Positioners

Datasheet

Flexibility from the Base up

The two different Magnet feet offer either 170 or 300 N on a small footprint of only Ø 30 mm.

The Vaccum Cup is most usefull on dry, even surfaces but can become the users only choice if no table

is in reach and magnets are no choice due to expected interference.

Tools and Adapters

PMKs 3D Positioners are deliverd with a suitable Hex Wrench AF7. There is one adapter available

from M6 to M8 threads as well as the Cameraadapter M6 to 1/4", making all sorts of connections

available.

TM 170 / TM 300(893-100-004 / 893-100-005)

GAD M86(893-000-M86)

ESCH SW7(893-000-SW7)

GAD MI6(893-000-MI6)

VAS 85(893-100-003)

© 2019 PMK GmbH

5

3D Positioners

Datasheet

More Adaptability

The four available types of Bases fit both types of arms, be it the standard hardcoated STV Models

or V2A versions for use in damp or wet environments.

Both variants are available with 130 and 200 mm width of span.

STV 130(893-200-130)

STV 200(893-200-200)

STV 130 v2a(893-200-13V)

STV 200 v2a(893-200-20V)

© 2019 PMK GmbH

6

3D Positioners

Datasheet

Clamping Variants

There are three different Probe Holders in the PMK Portfolio as of now: All of them fit the M6 threads

of the PMK Probe Positioning System.

The HAL 512 for 2.5 mm and 5 mm The Uniholder with a clamping width of up to

probe housings,for use with all PMK 17 mm for more unconventional types of

passive probe models and similars. probe housing.

The Twinholder accepting two 4mm Bananaplugs and the Twinadapter functioning as a switch for

more connections.

HAL 512(893-050-000)

TWINHOLD(890-880-104)

UNIHOLD(893-090-000)

TWA-2xM6(893-010-000)

© 2019 PMK GmbH

7

3D Positioners

Datasheet

PMK 3D Scope-Probe Positioners

Order-No. Type Description incl. Holder893-350-001 MSA 100 PMK Probe-Positioner with steel base, span width 200 mm (HAL512)893-350-008 MSA130 PMK Probe-Positioner with steel base, span width 130 mm (HAL512)893-350-002 MSB 40 PMK Probe-Positioner with table clamp, span width 200 mm (HAL512)893-350-003 MSC 85 PMK Probe-Positioner with vacuum cup, span width 200 mm (HAL512)893-350-004 MSM 130 PMK Probe-Positioner with magnet foot, span width 130 mm (HAL512)893-350-005 MSM 200 PMK Probe-Positioner with magnet foot, span width 200 mm (HAL512)893-350-006 MSU 1500 PMK Probe-Positioner with steel base, span width 200 mm (UNIHOLD)

Accessories and Spares for 3D Probe-Positioners

Order-No. Type Description 893-100-001 STS 100 1200g heavy steel base, Ø 100 mm, Positioner collet M6 893-100-002 TIK 40 Table clamp, clamping range up to 40 mm for edges and pipes, 2 collets M6 893-100-003 VAS 85 Vacuum cup M8 incl. 1 x adapter to M6, Ø 85 mm893-100-004 TM 170 Magnet foot 170 N, M6 Ø 30 mm893-100-005 TM 300 Magnet foot 300 N, M8 incl. 1 x adapter to M6, Ø 30 mm 893-200-130 STV 130 PMK Probe-Positioner span width 130 mm, M6 / M6893-200-13V STV 130 V2A PMK stainless steel Probe-Positioner span width 130 mm, M6 / M6893-200-200 STV 200 PMK Probe-Positioner span width 200 mm, M6 / M6 893-200-20V STV 200 V2A PMK stainless steel Probe-Positioner span width 200 mm, M6 / M6 893-050-000 HAL 512 Probe-Holder for PMK probes and other probing devices span width 5-12 mm, M6893-000-M86 GAD M86 Thread adapter M8 / M6 SW 13 mm893-000-MI6 GAD 1/4"M6 Cameraadapter 1/4" to M6893-090-000 UNIHOLD PMK universal Probe Holder "Uniholder" for PMK probes and other reading recorders with Ø 1.5 -17 mm, M6890-880-104 TWINHOLD PMK Twinholder accepting two 4 mm Bananaplugs893-010-000 TWA-2xM6 PMK Twinadapter accepting two M6 threads for simultaneous usage of two probe holders.893-000-SW7 ESCH SW7 Wrench AF7

© 2019 PMK GmbH

8

3D Positioners

Datasheet

WEEE/ RoHS Directives

(EC conformity marking)

Your help and efforts are required to protect and keep clean our environment. Therefore return this electronic product at the end of its life either to the Service Department of PMK Mess- und Kommunikationstechnik GmbH or take care of separate WEEE collection and professional WEEE treatment yourself. Do not dispose as unsorted municipal waste.

EC Directives:WEEE Directive 2002/96/EC – Waste Electrical and Electronic EquipmentRoHS Directive 2002/95/EC – Restriction of the use of certain Hazardous Substances in Electrical and Electronic Equipment

Safety Information

To avoid personal injury and to prevent fire or damage to this product or products connected to it, review and comply with the safety informations stated in the manual before using this product. Be aware that if you use this product in a manner not specified the protection this product provides may be impaired. Parts are not shown to scale. Please note, that specifications stated in this document are subject to change without notice.

Only qualified personnel should use this product.

Manufacturer

PMK Mess- und Kommunikationstechnik GmbH Königsteiner Str. 9865812 Bad Soden, Germany Internet: www.pmk.de Tel: +49 (0) 6196 5927 - 930 E-Mail: sales@pmk.de

Fax: +49 (0) 6196 5927 - 939

Revision F - November 2019