3dmc quick reference guide - topconcare.com€¦ · topcon logo menu elevation control key zoom out...
TRANSCRIPT
![Page 1: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/1.jpg)
![Page 2: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/2.jpg)
![Page 3: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/3.jpg)
P O S I T I O N I N G S Y S T E M S
3DMCMotor Grader and DozerQuick Reference Guide
Part Number 7010-0911
Rev. A
©Copyright Topcon Positioning Systems
October, 2008
All contents in this manual are copyrighted by Topcon. All rights reserved. The information contained herein may not be used, accessed, copied, stored, displayed, sold, modified, published, or distributed, or otherwise reproduced
without express written consent from Topcon.
![Page 4: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/4.jpg)
ECO#3396
![Page 5: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/5.jpg)
Table of Contents
Table of Contents
GPS+ ...................................................................... 1-1GPS+ Setup and Usage .................................................... 1-14Selecting Surface Files .................................................... 1-25Creating Surface Files ...................................................... 1-30Setting Blade Control ...................................................... 1-45Steering or Grading to Polyline ....................................... 1-55
mmGPS ................................................................. 2-1mmGPS Setup and Usage ................................................ 2-14Selecting Surface Files .................................................... 2-26Creating Surface Files ...................................................... 2-30Setting Blade Control ...................................................... 2-45
LPS ........................................................................ 3-1LPS Setup and Usage ....................................................... 3-14Selecting Surface Files .................................................... 3-22Creating Surface Files ...................................................... 3-27Setting Blade Control Options ......................................... 3-42Steering or Grading to Polyline ....................................... 3-52
2D ........................................................................... 4-12D Setup and Usage ......................................................... 4-14
P/N 7010-0911 1
![Page 6: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/6.jpg)
Table of Contents
Troubleshooting .................................................. a-1
Safety Information ............................................... b-1General Precautions .......................................................... b-1Radio Usage Information ................................................. b-3General Usage Warnings .................................................. b-4Base Station Precautions .................................................. b-5Internal Battery Pack Warnings ....................................... b-6
3DMC Quick Reference Guide2
![Page 7: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/7.jpg)
GPS+GPS+ applications use satellite signals to determine location. A radio connection between a GPS Base Station and the GPS machine allows the GX-60 Diplay and the MC-R3 Controller to receive GPS corrections from the Base Station. With the corrections, the GX-60 and the MC-R3 can accurately determine the difference between the cutting edge and the design surface and control the blade to move just the right amount of material.
P/N 7010-0911 1-1
![Page 8: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/8.jpg)
GPS+
GPS+ ComponentsMotor Grader
1. GX-60 Display
2. Remote Smart Knobs™
3. Blade Slope Sensor
4. Rotation Sensor
5. Mainfall Sensor
6. Hydraulic Manifold Assembly
7. MC-R3 Controller
8. MC-G3 Single Antenna
9. MC-G3 Dual Antenna
10. GPS Vibration Pole
5
1
2
3
10
6
7
8
11
4
9
3DMC Quick Reference Guide1-2
![Page 9: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/9.jpg)
11. Base Station Kit
P/N 7010-0911 1-3
![Page 10: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/10.jpg)
GPS+
Dozer
1. GX-60 Display
2. Simple Auto/Manual Knob
3. Blade Slope Sensor
4. Hydraulic Valves
5. MC-R3 Controller
6. MC-G3 Single Antenna
7. MC-G3 Dual Antenna
8. GPS Vibration Pole
9. Base Station Kit
1
10
3
5
2
6
9
4
7
3DMC Quick Reference Guide1-4
![Page 11: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/11.jpg)
P/N 7010-0911 1-5
![Page 12: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/12.jpg)
GPS+
3DMC GPS+ Introduction
3DMC Main Screen
Topcon Logo KeyThe Topcon Logo key at the top right corner of the Main Screen displays a pop-up bar of four menus: File, Control, Tools, and View.
To access the Topcon Logo menus, tap the Topcon Logo in the far right corner.
Unless used, the menus disappear after 10 seconds.
Slope Control Key
Zoom In
Topcon Logo Menu
Elevation Control Key
Zoom Out
Press Topcon Logo Key to view menus
3DMC Quick Reference Guide1-6
![Page 13: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/13.jpg)
Set-Points Pop-Up MenuThe Set-points pop-up menu allows quick adjustment of the elevation set-points from the main screen.
1. To access the Set-points pop-up menu, press and hold anywhere on the main screen.
2. Press Set-points Enabled (left) or Enabled (Right) to display the set-point adjustment arrows.
3. Press Set-points Increment to adjust the set-points increment.
P/N 7010-0911 1-7
![Page 14: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/14.jpg)
GPS+
4. Press the arrows to adjust the elevation set-points.
IncreaseSet-points
DecreaseSet-points
3DMC Quick Reference Guide1-8
![Page 15: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/15.jpg)
Elevation Control Key
Adjust Elevation Screen
Slope Control Key
Cut/Fill Offset
Cut/Fill Reading
GPS+ Status Radio Status
Dual GPS Status Radio Status
Angle of Blade
Type of Control Application
Design Cross Slope
AUTO Indicator
P/N 7010-0911 1-9
![Page 16: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/16.jpg)
GPS+
Adjust Slope Screen
Keyboard FunctionsWhen entering text or numbers, one of the following two pop-up keyboards displays:
3DMC Quick Reference Guide1-10
![Page 17: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/17.jpg)
Alphanumeric Keyboard
1. To access the keyboard from any field requiring an alphanumeric input, press the field.
Backspace
Space Bar
Negative Sign
1
P/N 7010-0911 1-11
![Page 18: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/18.jpg)
GPS+
2. Press the letters or numbers on the keyboard to type.
2
3DMC Quick Reference Guide1-12
![Page 19: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/19.jpg)
Numeric Keyboard
1. To access the keyboard from any field requiring an numeric input, press the field.
DecimalPoint
Accept Entry Cancel Entry
Backspace
Negative Sign
Increment Arrows
1
P/N 7010-0911 1-13
![Page 20: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/20.jpg)
GPS+
2. Press the numbers on the keyboard to type in a value, or use the arrow keys to increase the value incrementally.
GPS+ Setup and Usage
Copying 3DMC FilesTo copy files from a USB key:
2
3DMC Quick Reference Guide1-14
![Page 21: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/21.jpg)
GPS+ Setup and Usage
1. Press the green power button to turn on the display and insert the USB key into the GX-60 USB port.
2. Press Topcon Logo File Control.
USB Port
P/N 7010-0911 1-15
![Page 22: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/22.jpg)
GPS+
3. Press Copy and select the location of the file to copy from.
4. Select the file to copy and press Ok.
3a
3b
4a
4b
3DMC Quick Reference Guide1-16
![Page 23: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/23.jpg)
GPS+ Setup and Usage
5. Select the files and press Ok to apply the data to the current job.
Control Point Files
Selecting a Control Point File1. Press Topcon Logo File Control.
P/N 7010-0911 1-17
![Page 24: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/24.jpg)
GPS+
2. Select the control point file for the jobsite and press Ok.
2a
2b
3DMC Quick Reference Guide1-18
![Page 25: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/25.jpg)
GPS+ Setup and Usage
Creating a Machine Configuration File1. When the main screen displays, press Topcon
Logo Control Machine setup.
P/N 7010-0911 1-19
![Page 26: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/26.jpg)
GPS+
2. Press New.
3. Enter the machine information.
4. Press Next.
2
3DMC Quick Reference Guide1-20
![Page 27: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/27.jpg)
GPS+ Setup and Usage
5. Select and enter antenna information.
6. Press Next.
5
P/N 7010-0911 1-21
![Page 28: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/28.jpg)
GPS+
7. Select the GPS precisions for measuring static points. Press Next.
Low Precisions...
3DMC Quick Reference Guide1-22
![Page 29: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/29.jpg)
GPS+ Setup and Usage
8. Enter the information for GPS Comms Configuration and press Next.
9. Select and enter radio information and press Next. Refer to the serial number/radio label on the MC-R3 controller to determine the correct radio type.
8
P/N 7010-0911 1-23
![Page 30: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/30.jpg)
GPS+
The radio type selection must match the radio contained in the MC-R3.
10.Press Finish to save the machine configuration file.
9
10
3DMC Quick Reference Guide1-24
![Page 31: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/31.jpg)
Selecting Surface Files
11.Select a machine configuration file on the Machine files dialog box and press Ok to set this as the machine for the job.
Selecting Surface Files
Surface File TypesFlat Plane Surface/Sloping Plane Surface:
A planar (flat) surface with a 0% crossslope and mainfall. This surface is primarily used for building pads.
A sloping surface with cross slopes and mainfall based on a reference elevation.
11
P/N 7010-0911 1-25
![Page 32: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/32.jpg)
GPS+
As-built Surface File:
A color map of the graded surface.
TIN Surface File:
A TIN surface represents a surface as a network of non-overlapping triangles. Within each triangle the surface is represented by a plane. The triangles are made from a set of points called mass points.
Selecting a Working Surface File1. Press Topcon Logo File Surfaces Working.
2b
3DMC Quick Reference Guide1-26
![Page 33: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/33.jpg)
Selecting Surface Files
2. Select the working surface file for the jobsite and press Ok.
Selecting a Reference Surface FileA reference file is used as a visual reference only.
1. Press TopconLogo File Surfaces Reference.
2
P/N 7010-0911 1-27
![Page 34: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/34.jpg)
GPS+
2. Select the reference surface file for the jobsite and press Ok.
Selecting an As-built Surface FileAs-built surface files display a colored map of the graded surface.
1. Press TopconLogo File Surfaces As-built.
2
3DMC Quick Reference Guide1-28
![Page 35: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/35.jpg)
Selecting Surface Files
2. Select the as-built surface file for the jobsite and press Ok.
Example:
2
P/N 7010-0911 1-29
![Page 36: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/36.jpg)
GPS+
Creating Surface Files
Creating a New Plane Surface File 1. Press Topcon Logo File Surfaces Working,
Reference, or As-built.
2. Press New.
2
3DMC Quick Reference Guide1-30
![Page 37: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/37.jpg)
Creating Surface Files
3. Enter the name of the surface. Press Next.
Creating a Flat Plane Surface1. Press Topcon Logo File Surfaces Working
or Reference.
3
P/N 7010-0911 1-31
![Page 38: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/38.jpg)
GPS+
2. Press New.
3. Enter the name of the new surface file. Press Next.
4. Move the machine to the elevation reference point.
3DMC Quick Reference Guide1-32
![Page 39: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/39.jpg)
Creating Surface Files
5. When the sensor is over the point, press Measure pt to measure the elevation reference point, and then Press Ok.
5b5a
P/N 7010-0911 1-33
![Page 40: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/40.jpg)
GPS+
6. Enter a grid interval for the main screen. Press Next.
7. Press Finish to save the new surface file.
3DMC Quick Reference Guide1-34
![Page 41: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/41.jpg)
Creating Surface Files
Creating a Sloping Plane Surface1. Press Topcon Logo File Surfaces Working
or Reference
2. Press New.
P/N 7010-0911 1-35
![Page 42: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/42.jpg)
GPS+
3. Enter the name of the new surface file. Press Next.
4. Move the machine to the elevation reference point.
5. Move the machine to point A and position the sensor on the cutting edge on the selected point.
3DMC Quick Reference Guide1-36
![Page 43: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/43.jpg)
Creating Surface Files
6. When the cutting edge rests on the point, press A to measure the point, and then press Ok.
6a
6b
P/N 7010-0911 1-37
![Page 44: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/44.jpg)
GPS+
7. Move to point B and position the sensor on the cutting edge on the selected point.
8. When the cutting edge rests on the point, press B to measure the point, and then press Ok.
8a
8b
3DMC Quick Reference Guide1-38
![Page 45: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/45.jpg)
Creating Surface Files
9. Press the Crossfall Grade entry box and enter a crossfall.
10.Move the machine to the elevation reference point.
11.Press Measure pt. and then press Ok.
5b5a
P/N 7010-0911 1-39
![Page 46: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/46.jpg)
GPS+
12.Enter a grid interval and crossfall. Press Next.
13.Press Finish to save the new surface file and end the process.
12a 12b
3DMC Quick Reference Guide1-40
![Page 47: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/47.jpg)
Creating Surface Files
Raising or Lowering the Existing SurfaceRaise/Lower the existing surface creates a new surface file based on an existing file.
1. Press Topcon Logo File Surfaces Working or Reference.
2. Press New.
P/N 7010-0911 1-41
![Page 48: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/48.jpg)
GPS+
3. Enter the name of the new Raise/lower existing surface file. Press Next.
4. Select the surface to use as the reference from which to raise or lower the new surface.
5. Enter an elevation adjustment. Press Next.
6. Press Finish to save the new surface file.
4 5a
5b
3DMC Quick Reference Guide1-42
![Page 49: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/49.jpg)
Creating Surface Files
Selecting Jobsite Files 1. From the main screen, navigate to the file type
dialog box.
• Topcon Logo File Linework
• Topcon Logo File Point files
P/N 7010-0911 1-43
![Page 50: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/50.jpg)
GPS+
2. On the Linework/Point files dialog box, select the file for the jobsite and press Ok.
Setting Blade Control
Automatic Best-Fit Blade ControlWhen using the automatic best-fit method, 3DMC uses the entire cutting edge of the blade as the elevation reference.
2
3DMC Quick Reference Guide1-44
![Page 51: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/51.jpg)
Setting Blade Control
1. Press Topcon Logo Control Blade control.
2. Select Automatic best-fit (whole blade).
Control Using Single Point on BladeWhen using the control using single point on blade method, 3DMC uses a selected point on the blade to
P/N 7010-0911 1-45
![Page 52: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/52.jpg)
GPS+
use as the elevation reference rather than the entire cutting edge of the blade.
1. Press Topcon Logo Control Blade control.
2. Select Control using single point on blade.
To quickly change the blade control point using the section view:
3DMC Quick Reference Guide1-46
![Page 53: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/53.jpg)
Setting Blade Control
• To move to the far left or far right edge of the blade, press and hold the edge of the blade for one second. On the pop-up menu, tap Move control left or Move control right.
• Press and hold a point on the blade for one second. On the pop-up menu, tap Move control.
To change the blade control point using the Control menu: 1. Press Topcon Logo Control Blade control.
2. With Control using single point on blade selected, hold the slider button and move it left or right to
P/N 7010-0911 1-47
![Page 54: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/54.jpg)
GPS+
select a point at a distance from the left/right side of the blade.
3. Press OK to apply this blade control point to the machine.
Setting As-built Control OptionsAs-built surface files display a colored map of the graded surface.
3DMC Quick Reference Guide1-48
![Page 55: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/55.jpg)
Setting Blade Control
1. Press Topcon Logo Control As-built control.
2. Select the As-built options. Then press Advanced to view the advanced options.
P/N 7010-0911 1-49
![Page 56: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/56.jpg)
GPS+
3. Select advanced options, and press Ok.
Example:
3DMC Quick Reference Guide1-50
![Page 57: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/57.jpg)
Setting Blade Control
Setting Steer Indication Options1. Press Topcon Logo Control Steer indication.
2. Set the steer indication options, and press OK.
P/N 7010-0911 1-51
![Page 58: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/58.jpg)
GPS+
Valve Offset Calibration1. Raise the machine blade so that both sides of the
cutting edge rest a few inches above the ground.
2. At the display, tap Topcon Logo Control Valve offsets.
WARNINGSince the blade is about to move, automatically, HANDS and FEET should be clear of the blade!
3. Press Raise left Set and tap the arrows to increase or decrease the valve offsets.
NOTICEBoost Setting adjustments are not recommended and may cause poor machine performance.
3DMC Quick Reference Guide1-52
![Page 59: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/59.jpg)
Setting Blade Control
4. Repeat Step 3 for each of the selections.
5. Press OK.
3
P/N 7010-0911 1-53
![Page 60: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/60.jpg)
GPS+
Steering or Grading to Polyline
Steer to Polyline1. Press Topcon Logo File Linework.
2. Select the Linework file for the job, and Press Ok.
3DMC Quick Reference Guide1-54
![Page 61: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/61.jpg)
Steering or Grading to Polyline
3. Press Topcon Logo View Display options Linework.
4. Select the polylines to display.
P/N 7010-0911 1-55
![Page 62: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/62.jpg)
GPS+
5. Press Topcon Logo View Left Window Grade Indicator.
6. Press Topcon Logo View Lower Window Lightbar.
7. Press and hold the polyline to use for steering, then press Steer to polyline on the pop-up menu;
3DMC Quick Reference Guide1-56
![Page 63: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/63.jpg)
Steering or Grading to Polyline
graphical cross lines display along the selected polyline.
8. Press Topcon Logo Control Steer indication to change the steer indication settings.
P/N 7010-0911 1-57
![Page 64: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/64.jpg)
GPS+
9. Press Topcon Logo View Display options Alignment.
10.Change the alignment settings, and press OK.
3DMC Quick Reference Guide1-58
![Page 65: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/65.jpg)
Steering or Grading to Polyline
11.Begin steering.
Grading to Polyline1. Press Topcon Logo File Linework, select the
correct Linework file, and press Ok.
2. Press Topcon Logo View Display options Linework.
P/N 7010-0911 1-59
![Page 66: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/66.jpg)
GPS+
3. Select the polylines to display, and press Ok.
4. On the main screen, press and hold the polyline to use for grading to, then press Grade to polyline on the pop-up menu. Graphical cross lines display along the polyline.
3DMC Quick Reference Guide1-60
![Page 67: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/67.jpg)
Steering or Grading to Polyline
5. Begin grading. As needed, repeat Step 4 above to grade to another polyline.
Performing Topographic Surveys1. press Topcon Logo File Point files.
P/N 7010-0911 1-61
![Page 68: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/68.jpg)
GPS+
2. Create a new point file or select an existing point file. Press Ok to return to the Main Screen.
3. Press Topcon Logo Tools Topo survey.
3DMC Quick Reference Guide1-62
![Page 69: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/69.jpg)
Steering or Grading to Polyline
4. Enter or select the information. Press Ok when done.
5. Press Ok to start the topo survey function.
6. Begin driving. When the machine begins to move, 3DMC will begin measuring and logging the data.
P/N 7010-0911 1-63
![Page 70: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/70.jpg)
GPS+
7. To stop topo measurements, press Topcon Logo Stop topo survey. Otherwise, 3DMC continues logging measurements.
Checking the Blade’s PositionUse position check to obtain and accurate position check of the blade.
3DMC Quick Reference Guide1-64
![Page 71: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/71.jpg)
Steering or Grading to Polyline
1. To check the position of the blade, press Topcon Logo Tools Position check.
P/N 7010-0911 1-65
![Page 72: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/72.jpg)
GPS+
2. On the Position Check dialog box, select the Point of interest (either left edge or right edge of blade), and press Measure.
3. When finished, the Position Check dialog box displays the point on the job at the selected edge of
2a
2b
3DMC Quick Reference Guide1-66
![Page 73: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/73.jpg)
Steering or Grading to Polyline
the blade. Press Cancel to return to the Main Screen.
Changing Radio Channels1. Press Topcon Logo Tools Configure radios.
P/N 7010-0911 1-67
![Page 74: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/74.jpg)
GPS+
2. Select the Radio type that matches the radio type in the MC-R3, and then press Configure. 3DMC will connect to the radio after several second.
3DMC Quick Reference Guide1-68
![Page 75: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/75.jpg)
Steering or Grading to Polyline
3. Enter radio configuration information, and select the channel. The channel must match the channel of the base station.
4. Press Advanced to select the country of operation, and then press Ok.
P/N 7010-0911 1-69
![Page 76: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/76.jpg)
GPS+
5. Press Set to save the radio configuration settings and return to the GPS Radio Configuration screen.
6. Press Ok to save the radio configuration settings and return to the main screen.
Viewing GPS Information1. To view the GPS information dialog box and tabs,
press the Elevation control key.
Elevation Control Key
3DMC Quick Reference Guide1-70
![Page 77: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/77.jpg)
Steering or Grading to Polyline
2. Press the GPS info button.
P/N 7010-0911 1-71
![Page 78: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/78.jpg)
GPS+
GPS Status and Quality (Fix)
Cutting Edge Position (Position)
Monitor Satellites and Enter Mask Angle
3DMC Quick Reference Guide1-72
![Page 79: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/79.jpg)
Steering or Grading to Polyline
(Satellites)
View Receiver Information or Reset Receiver (Info)
Satellite Planning Information (Planning)
P/N 7010-0911 1-73
![Page 80: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/80.jpg)
GPS+
The red vertical line marks the current time.
Adjusting Valve Gain1. On the 3DMC Main Screen, press the Elevation
Control key.
Elevation Control Key
3DMC Quick Reference Guide1-74
![Page 81: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/81.jpg)
Steering or Grading to Polyline
2. Press the Elevation valve gain Set key, changing it to red.
3. Change the offset using the up/down arrow.
4. Press Ok.
Changing Cut/Fill Offsets1. On the 3DMC Main Screen, press the Elevation
Control key.
Elevation Control Key
P/N 7010-0911 1-75
![Page 82: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/82.jpg)
GPS+
2. Press Elevation set point Set, changing it to red.
3. Change the offset using the up/down arrows.
4. Press Ok.
Changing the Display View
Main Window ViewsTo access the main window view, press Topcon Logo View Main window, then press the
3DMC Quick Reference Guide1-76
![Page 83: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/83.jpg)
Steering or Grading to Polyline
necessary view; a check mark indicates the active view.
Plan View Section View
Profile View
P/N 7010-0911 1-77
![Page 84: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/84.jpg)
GPS+
Left Window ViewsTo access the lower window view, press Topcon Logo View Left window, then select a view.
Profile View
Section View
GradeIndicator
3DMC Quick Reference Guide1-78
![Page 85: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/85.jpg)
Steering or Grading to Polyline
Right Window ViewTo access the right window view, have the Plan view visible and press Topcon Logo View Right window, then select Grade indicator.
P/N 7010-0911 1-79
![Page 86: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/86.jpg)
GPS+
Lower Window ViewsTo access the lower window view, press Topcon Logo View Lower window, then select a view.
Profile View
Section View
Lightbar
3DMC Quick Reference Guide1-80
![Page 87: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/87.jpg)
Steering or Grading to Polyline
Changing the Grade Indicator ScaleTo view the grade indicator, press Topcon Logo View Left window Grade indicator.
P/N 7010-0911 1-81
![Page 88: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/88.jpg)
GPS+
To change the grade display, press and hold the grade indicator for one second, press Grade display, then the necessary option.
To change the on-grade or extents, press and hold the grade indicator for one second, then press the necessary menu option.
Red=Fill
Arrow = Positionof Cutting Edge
Green =On-Grade
Blue = Cut
3DMC Quick Reference Guide1-82
![Page 89: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/89.jpg)
Steering or Grading to Polyline
Changing the Light Bar Scale and ExtentsTo view the light bar scale, press Topcon Logo View Lower window Light bar.
P/N 7010-0911 1-83
![Page 90: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/90.jpg)
GPS+
To change the light bar scale and extents: Press and hold the light bar scale for one second, then press Green, Yellow, or Extents to change the scale.
Changing the Steer Indication Scale and ExtentsThis function is only available while in Steer Indication mode. See “Steering or Grading to Polyline” for details on enabling steer indication.
3DMC Quick Reference Guide1-84
![Page 91: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/91.jpg)
Steering or Grading to Polyline
To change the steer indication scale and extents: Press and hold the light bar scale for one second, then press Green, Yellow, or Extents to change the scale.
P/N 7010-0911 1-85
![Page 92: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/92.jpg)
GPS+
Changing Display OptionsTo view available options, press TopconLogo View Display options.
3DMC Quick Reference Guide1-86
![Page 93: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/93.jpg)
Steering or Grading to Polyline
Control Points1. To view information about the control points, press
Topcon Logo View Display options Control Points.
2. Enable (check mark) or enter the necessary options, then press Ok.
P/N 7010-0911 1-87
![Page 94: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/94.jpg)
GPS+
Working Surface Display Options1. When using a TIN surface model file, press
Topcon Logo View Display options Working Surface.
3DMC Quick Reference Guide1-88
![Page 95: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/95.jpg)
Steering or Grading to Polyline
2. Press Color to change the color of the alignment and station lines. Select a color and press Ok.
2a
2b
P/N 7010-0911 1-89
![Page 96: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/96.jpg)
GPS+
3. Enable (check mark) or enter the necessary options, then press Ok.
3DMC Quick Reference Guide1-90
![Page 97: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/97.jpg)
Steering or Grading to Polyline
Alignment Display Options1. When using either a road surface model or an
alignment file, press Topcon Logo View Display options Alignment.
P/N 7010-0911 1-91
![Page 98: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/98.jpg)
GPS+
2. Change the alignment settings, and press OK.
As-built Surface Display OptionsAs-built surface files display a colored map of the graded surface.
3DMC Quick Reference Guide1-92
![Page 99: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/99.jpg)
Steering or Grading to Polyline
1. Press Topcon Logo View Display options As-built Surface.
2. Select and/or enter the necessary options and press Ok.
P/N 7010-0911 1-93
![Page 100: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/100.jpg)
GPS+
Linework Display Options1. When using a Linework file, press Topcon
Logo View Display options Linework.
2. To display layers on the Main Screen, select the layer and press Show, “Yes” displays in the Show column. Press Show again to not display the layer on the Main Screen; “No” displays in the Show column.
3DMC Quick Reference Guide1-94
![Page 101: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/101.jpg)
Steering or Grading to Polyline
3. Press Ok to return to the Main Screen.
P/N 7010-0911 1-95
![Page 102: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/102.jpg)
GPS+
Point Display Options1. When using a Point file, press Topcon
Logo View Display options Points.
3DMC Quick Reference Guide1-96
![Page 103: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/103.jpg)
Steering or Grading to Polyline
2. To display a points layer on the main screen, select the layer and press Ok.
3. To display points symbols and/or point numbers during a topographic survey, select the corresponding check box and press Ok.
P/N 7010-0911 1-97
![Page 104: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/104.jpg)
GPS+
Lightbar Display Options1. To set the lightbar display options, press Topcon
Logo View Display options Light bars.
3DMC Quick Reference Guide1-98
![Page 105: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/105.jpg)
Steering or Grading to Polyline
2. Set the LD-40 options, and press Ok.
P/N 7010-0911 1-99
![Page 106: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/106.jpg)
GPS+
Changing the Background Color1. To change the background color of the Main
Screen, press Topcon Logo View Display options Background color.
2. Select a color and press Ok.
3DMC Quick Reference Guide1-100
![Page 107: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/107.jpg)
Steering or Grading to Polyline
Display Units Options1. To set the type of units used in the job, press
Topcon Logo View Display options Display units.
P/N 7010-0911 1-101
![Page 108: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/108.jpg)
GPS+
2. Select the display unit options and press Ok.
Viewing and Updating 3DMCTo view information about 3DMC, press Topcon Logo View About 3DMC.
3DMC Quick Reference Guide1-102
![Page 109: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/109.jpg)
Steering or Grading to Polyline
Options1. To view the enabled options, press Options on the
about 3DMC dialog box.
2. To modify 3DMC options, press Modify on the Options dialog box.
1
2
P/N 7010-0911 1-103
![Page 110: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/110.jpg)
GPS+
3. Record the Device identification number to give to your Topcon representative. Contact your Topcon representative to obtain new authorization codes for the necessary applications.
4. When you have received the new authorization codes, enter the codes in the ControlBox dialog box.
5. Press Ok to apply the new codes and options. Press Ok on each screen to return to the main screen.
6. Turn off the display, wait a couple seconds, and then turn on the display to activate the new passwords.
3DMC Quick Reference Guide1-104
![Page 111: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/111.jpg)
mmGPSMillimeter GPS (mmGPS) combines the elevation accuracy of a laser with the horizontal and vertical accuracy of GPS+ receivers to provide millimeter accuracy while grading or surveying. The system provides multiple rover support for machine and pole mounted sensors.
mmGPS Components
Motor Grader
1. GX-60 Display
2. Remote Smart Knobs™
3. Blade Slope Sensor
5
1
2
3
11
6
74
8
9
10
P/N 7010-0911 2-1
![Page 112: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/112.jpg)
mmGPS
4. Rotation Sensor
5. Mainfall Sensor
6. Hydraulic Manifold Assembly
7. MC-R3 Controller
8. PZS MC-G3 Sensor
9. PZL-1 Transmitter
10. PZS-1 with GPS+ Receiver
11. GPS Vibration Pole
3DMC Quick Reference Guide2-2
![Page 113: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/113.jpg)
9063-1121-XPZS-MC EXT. 1
8-PIN DTCONNECTORS
PZS MC-G3
-
+
9063
-111
0-X
MC-
R3 /
M.F.
9063-1106-XX
9063-1105-XX
GX-60
ATTACH TO UPPER CONNECTOR
GROUND TO CHASSIS
MC-R3CONTROLLER
SMART KNOBSGX-60
MAINFALL SENSOR
ROTATION SENSORRADIO ANTENNA
B
A
SLOPE SENSOR
2
1
1
2
1
2
2
1
LEFTLO
WER
RAISE
LEFTRA
ISERIG
HT
LOW
ERRIG
HT
~
VALVE CABLES
P/N 7010-0911 2-3
![Page 114: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/114.jpg)
mmGPS
Dozer
1. GX-60 Display
2. Simple Knob
3. Blade Slope Sensor
4. Hydraulic Manifold Assembly
5. MC-R3 Controller
6. PZS MC-G3 Sensor
7. PZL-1 Transmitter
8. PZS-1 with GPS+ Receiver
1
3
5
2
6
9
4
87
3DMC Quick Reference Guide2-4
![Page 115: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/115.jpg)
9. GPS Vibration Pole
P/N 7010-0911 2-5
![Page 116: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/116.jpg)
mmGPS
3DMC mmGPS Introduction
3DMC Main Screen
Topcon Logo KeyThe Topcon Logo key at the top right corner of the Main Screen displays a pop-up bar of four menus: File, Control, Tools, and View.
To access the Topcon Logo menus, tap the Topcon Logo in the far right corner.
Unless used, the menus disappear after 10 seconds.
Slope Control Key
Zoom In
Topcon Logo Menu
Elevation Control Key
Zoom Out
Press Topcon Logo Key to view menus
3DMC Quick Reference Guide2-6
![Page 117: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/117.jpg)
Set-Points Pop-Up MenuThe Set-points pop-up menu allows quick adjustment of the elevation set-points from the main screen.
1. To access the Set-points pop-up menu, press and hold anywhere on the main screen.
2. Press Set-points Enabled (left) or Enabled (Right) to display the set-point adjustment arrows.
3. Press Set-points Increment to adjust the set-points increment.
P/N 7010-0911 2-7
![Page 118: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/118.jpg)
mmGPS
4. Press the arrows to adjust the elevation set-points.
IncreaseSet-points
DecreaseSet-points
3DMC Quick Reference Guide2-8
![Page 119: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/119.jpg)
Elevation Control Key
Adjust Elevation Screen
Slope Control Key
Cut/Fill Offset
Cut/Fill Reading
mmGPS Status Radio Status
Angle of Blade
Type of Control Application
Design Cross Slope
AUTO Indicator
P/N 7010-0911 2-9
![Page 120: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/120.jpg)
mmGPS
Adjust Slope Screen
Keyboard FunctionsWhen entering text or numbers, one of the following two pop-up keyboards displays:
3DMC Quick Reference Guide2-10
![Page 121: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/121.jpg)
Alphanumeric Keyboard
1. To access the keyboard from any field requiring an alphanumeric input, press the field.
Backspace
Space Bar
Negative Sign
1
P/N 7010-0911 2-11
![Page 122: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/122.jpg)
mmGPS
2. Press the letters or numbers on the keyboard to type.
2
3DMC Quick Reference Guide2-12
![Page 123: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/123.jpg)
Numeric Keyboard
1. To access the keyboard from any field requiring an numeric input, press the field.
DecimalPoint
Accept Entry Cancel Entry
Backspace
Negative Sign
Increment Arrows
1
P/N 7010-0911 2-13
![Page 124: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/124.jpg)
mmGPS
2. Press the numbers on the keyboard to type in a value, or use the arrow keys to increase the value incrementally.
mmGPS Setup and Usage
Copying 3DMC FilesTo copy files from a USB key:
2
3DMC Quick Reference Guide2-14
![Page 125: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/125.jpg)
mmGPS Setup and Usage
1. Press the green power button to turn on the display and insert the USB key into the GX-60 USB port.
2. Press Topcon Logo File Control.
USB Port
P/N 7010-0911 2-15
![Page 126: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/126.jpg)
mmGPS
3. Press Copy and select the location of the file to copy from.
4. Select the file to copy and press Ok.
3a
3b
4a
4b
3DMC Quick Reference Guide2-16
![Page 127: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/127.jpg)
mmGPS Setup and Usage
5. Select the files and press Ok to apply the data to the current job.
Control Point Files
Selecting a Control Point File1. Press Topcon Logo File Control.
P/N 7010-0911 2-17
![Page 128: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/128.jpg)
mmGPS
2. Select the control point file for the jobsite and press Ok.
2a
2b
3DMC Quick Reference Guide2-18
![Page 129: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/129.jpg)
mmGPS Setup and Usage
Creating a Machine Configuration File1. When the main screen displays, press Topcon
Logo Control Machine setup.
P/N 7010-0911 2-19
![Page 130: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/130.jpg)
mmGPS
2. Press New.
3. Enter the machine information.
4. Press Next.
2
3DMC Quick Reference Guide2-20
![Page 131: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/131.jpg)
mmGPS Setup and Usage
5. Select and enter antenna information.
6. Press Next.
5
P/N 7010-0911 2-21
![Page 132: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/132.jpg)
mmGPS
7. Select the GPS precisions for measuring static points. Press Next.
Low Precisions...
3DMC Quick Reference Guide2-22
![Page 133: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/133.jpg)
mmGPS Setup and Usage
8. Enter the information for GPS Comms Configuration and press Next.
9. Select and enter radio information and press Next. Refer to the serial number/radio label on the MC-R3 controller to determine the correct radio type.
8
P/N 7010-0911 2-23
![Page 134: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/134.jpg)
mmGPS
The radio type selection must match the radio contained in the MC-R3.
10.Select and enter LaserZone Receiver information and press Next.
9
9
3DMC Quick Reference Guide2-24
![Page 135: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/135.jpg)
mmGPS Setup and Usage
11.Press Finish to save the machine configuration file.
12.Select a machine configuration file on the Machine files dialog box and press Ok to set this as the machine for the job.
10
11
P/N 7010-0911 2-25
![Page 136: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/136.jpg)
mmGPS
Selecting Surface Files
Surface File TypesFlat Plane Surface/Sloping Plane Surface:
A planar (flat) surface with a 0% crossslope and mainfall. This surface is primarily used for building pads.
A sloping surface with cross slopes and mainfall based on a reference elevation.
As-built Surface File:
A color map of the graded surface.
TIN Surface File:
A TIN surface represents a surface as a network of non-overlapping triangles. Within each triangle the surface is represented by a plane. The triangles are made from a set of points called mass points.
3DMC Quick Reference Guide2-26
![Page 137: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/137.jpg)
Selecting Surface Files
Selecting a Working Surface File1. Press Topcon Logo File Surfaces Working.
2. Select the working surface file for the jobsite and press Ok.
2b
2
P/N 7010-0911 2-27
![Page 138: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/138.jpg)
mmGPS
Selecting a Reference Surface File1. Press TopconLogo File Surfaces Reference.
2. Select the reference surface file for the jobsite and press Ok.
2
3DMC Quick Reference Guide2-28
![Page 139: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/139.jpg)
Selecting Surface Files
Selecting an As-built Surface FileAs-built surface files display a colored map of the graded surface.
1. Press TopconLogo File Surfaces As-built.
2. Select the as-built surface file for the jobsite and press Ok.
2
P/N 7010-0911 2-29
![Page 140: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/140.jpg)
mmGPS
Example:
Creating Surface Files
Creating a New Plane Surface File 1. Press Topcon Logo File Surfaces Working,
Reference, or As-built.
3DMC Quick Reference Guide2-30
![Page 141: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/141.jpg)
Creating Surface Files
2. Press New.
3. Enter the name of the surface. Press Next.
2
3
P/N 7010-0911 2-31
![Page 142: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/142.jpg)
mmGPS
Creating a Flat Plane Surface 1. Press Topcon Logo File Surfaces Working
or Reference.
2. Press New.
3DMC Quick Reference Guide2-32
![Page 143: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/143.jpg)
Creating Surface Files
3. Enter the name of the new surface file. Press Next.
4. Move the machine to the elevation reference point.
P/N 7010-0911 2-33
![Page 144: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/144.jpg)
mmGPS
5. When the sensor is over the point, press Measure pt to measure the elevation reference point, and then Press Ok.
5b5a
3DMC Quick Reference Guide2-34
![Page 145: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/145.jpg)
Creating Surface Files
6. Enter a grid interval for the main screen. Press Next.
7. Press Finish to save the new surface file.
P/N 7010-0911 2-35
![Page 146: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/146.jpg)
mmGPS
Creating a Sloping Plane Surface1. Press Topcon Logo File Surfaces Working
or Reference
2. Press New.
3DMC Quick Reference Guide2-36
![Page 147: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/147.jpg)
Creating Surface Files
3. Enter the name of the new surface file. Press Next.
4. Move the machine to the elevation reference point.
5. Move the machine to point A and position the sensor on the cutting edge on the selected point.
P/N 7010-0911 2-37
![Page 148: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/148.jpg)
mmGPS
6. When the cutting edge rests on the point, press A to measure the point, and then press Ok.
6a
6b
3DMC Quick Reference Guide2-38
![Page 149: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/149.jpg)
Creating Surface Files
7. Move to point B and position the sensor on the cutting edge on the selected point.
8. When the cutting edge rests on the point, press B to measure the point, and then press Ok.
8a
8b
P/N 7010-0911 2-39
![Page 150: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/150.jpg)
mmGPS
9. Press the Crossfall Grade entry box and enter a crossfall.
10.Move the machine to the elevation reference point.
11.Press Measure pt. and then press Ok.
5b5a
3DMC Quick Reference Guide2-40
![Page 151: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/151.jpg)
Creating Surface Files
12.Enter a grid interval and crossfall. Press Next.
13.Press Finish to save the new surface file and end the process.
12a 12b
P/N 7010-0911 2-41
![Page 152: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/152.jpg)
mmGPS
Raising or Lowering the Existing SurfaceRaise/Lower the existing surface creates a new surface file based on an existing file.
1. Press Topcon Logo File Surfaces Working or Reference.
2. Press New.
3DMC Quick Reference Guide2-42
![Page 153: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/153.jpg)
Creating Surface Files
3. Enter the name of the new Raise/lower existing surface file. Press Next.
4. Select the surface to use as the reference from which to raise or lower the new surface.
5. Enter an elevation adjustment. Press Next.
6. Press Finish to save the new surface file.
4 5a
5b
P/N 7010-0911 2-43
![Page 154: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/154.jpg)
mmGPS
Selecting Jobsite Files1. From the main screen, navigate to the file type
dialog box.
• Topcon Logo File Linework
• Topcon Logo File Point files
3DMC Quick Reference Guide2-44
![Page 155: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/155.jpg)
Setting Blade Control
2. On the Linework/Point files dialog box, select the file for the jobsite and press Ok.
Setting Blade Control
Automatic Best-Fit Blade ControlWhen using the automatic best-fit method, 3DMC uses the entire cutting edge of the blade as the elevation reference.
2
P/N 7010-0911 2-45
![Page 156: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/156.jpg)
mmGPS
1. Press Topcon Logo Control Blade control.
2. Select Automatic best-fit (whole blade).
3DMC Quick Reference Guide2-46
![Page 157: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/157.jpg)
Setting Blade Control
Control Using Single Point on BladeWhen using the control using single point on blade method, 3DMC uses a selected point on the blade to use as the elevation reference rather than the entire cutting edge of the blade.
1. Press Topcon Logo Control Blade control.
P/N 7010-0911 2-47
![Page 158: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/158.jpg)
mmGPS
2. Select Control using single point on blade.
To quickly change the blade control point using the section view:
• To move to the far left or far right edge of the blade, press and hold the edge of the blade for one second. On the pop-up menu, tap Move control left or Move control right.
• Press and hold a point on the blade for one second. On the pop-up menu, tap Move control.
To change the blade control point using the Control menu:
3DMC Quick Reference Guide2-48
![Page 159: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/159.jpg)
Setting Blade Control
1. Press Topcon Logo Control Blade control.
2. With Control using single point on blade selected, hold the slider button and move it left or right to select a point at a distance from the left/right side of the blade.
P/N 7010-0911 2-49
![Page 160: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/160.jpg)
mmGPS
3. Press OK to apply this blade control point to the machine.
Setting As-built Control OptionsAs-built surface files display a colored map of the graded surface.
1. Press Topcon Logo Control As-built control.
3DMC Quick Reference Guide2-50
![Page 161: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/161.jpg)
Setting Blade Control
2. Select the As-built options. Then press Advanced to view the advanced options.
3. Select advanced options, and press Ok.
P/N 7010-0911 2-51
![Page 162: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/162.jpg)
mmGPS
Example:
Setting Steer Indication Options1. Press Topcon Logo Control Steer indication.
3DMC Quick Reference Guide2-52
![Page 163: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/163.jpg)
Setting Blade Control
2. Select the steer indication options. Then press Ok.
P/N 7010-0911 2-53
![Page 164: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/164.jpg)
mmGPS
Setting PZS MC-G3 Receiver Options1. Press Topcon Logo Control PZS-MC
receiver
2. Set the PZS MC-G3 options. Then press Ok.
3DMC Quick Reference Guide2-54
![Page 165: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/165.jpg)
Setting Blade Control
Setting PZL-1 Transmitter Options1. Press Topcon Logo Control PZL-1
transmitter.
2. Set the PZL-1 transmitter options. Then press Ok.
P/N 7010-0911 2-55
![Page 166: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/166.jpg)
mmGPS
Valve Offset Calibration1. Raise the machine blade so that both sides of the
cutting edge rest a few inches above the ground.
2. At the display, tap Topcon Logo Control Valve offsets.
WARNINGSince the blade is about to move, automatically, HANDS and FEET should be clear of the blade!
3. Press Raise left Set and tap the arrows to increase or decrease the valve offsets.
3DMC Quick Reference Guide2-56
![Page 167: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/167.jpg)
Setting Blade Control
NOTICEBoost Setting adjustments are not recommended and may cause poor machine performance.
4. Repeat Step 3 for each of the selections.
5. Press OK.
3
P/N 7010-0911 2-57
![Page 168: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/168.jpg)
mmGPS
Performing Topographic Surveys1. Press Topcon Logo File Point files.
2. Create a new point file or select an existing point file. Press Ok to return to the Main Screen.
3DMC Quick Reference Guide2-58
![Page 169: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/169.jpg)
Setting Blade Control
3. Press Topcon Logo Tools Topo survey.
4. Enter or select the information. Press Ok when done.
5. Press Ok to start the topo survey function.
6. Begin driving. When the machine begins to move, 3DMC will begin measuring and logging the data.
P/N 7010-0911 2-59
![Page 170: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/170.jpg)
mmGPS
7. To stop topo measurements, press Topcon Logo Stop topo survey. Otherwise, 3DMC continues logging measurements.
Checking the Blade’s Position1. To check the position of the blade, press Topcon
Logo Tools Position check.
3DMC Quick Reference Guide2-60
![Page 171: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/171.jpg)
Setting Blade Control
2. On the Position Check dialog box, select the Point of interest (either left edge or right edge of blade), and press Measure.
3. When finished, the Position Check dialog box displays the point on the job at the selected edge of
2a
2b
P/N 7010-0911 2-61
![Page 172: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/172.jpg)
mmGPS
the blade. Press Cancel to return to the Main Screen.
Viewing GPS Information1. To view the GPS information dialog box and tabs,
press the Elevation control key.
Elevation Control Key
3DMC Quick Reference Guide2-62
![Page 173: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/173.jpg)
Setting Blade Control
2. Press the GPS info button.
P/N 7010-0911 2-63
![Page 174: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/174.jpg)
mmGPS
GPS Status and Quality (Fix)
Cutting Edge Position (Position)
Monitor Satellites and Enter Mask Angle
3DMC Quick Reference Guide2-64
![Page 175: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/175.jpg)
Setting Blade Control
(Satellites)
View Receiver Information or Reset Receiver (Info)
Satellite Planning Information (Planning)
P/N 7010-0911 2-65
![Page 176: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/176.jpg)
mmGPS
The red vertical line marks the current time.
Changing Radio Channels1. Press Topcon Logo Tools Configure radios.
3DMC Quick Reference Guide2-66
![Page 177: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/177.jpg)
Setting Blade Control
2. Select the Radio type that matches the radio type in the MC-R3, and then press Configure. 3DMC will connect to the radio after several second.
P/N 7010-0911 2-67
![Page 178: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/178.jpg)
mmGPS
3. Enter radio configuration information, and select the channel. The channel must match the channel of the base station.
4. Press Advanced to select the country of operation, and then press Ok.
3DMC Quick Reference Guide2-68
![Page 179: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/179.jpg)
Setting Blade Control
5. Press Set to save the radio configuration settings and return to the GPS Radio Configuration screen.
6. Press Ok to save the radio configuration settings and return to the main screen.
P/N 7010-0911 2-69
![Page 180: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/180.jpg)
mmGPS
Steering or Grading to Polyline
Steering to Polyline1. Press Topcon Logo File Linework.
2. Select the Linework file for the job, and Press Ok.
3DMC Quick Reference Guide2-70
![Page 181: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/181.jpg)
Setting Blade Control
3. Press Topcon Logo View Display options Linework.
4. Select the polylines to display.
P/N 7010-0911 2-71
![Page 182: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/182.jpg)
mmGPS
5. Press Topcon Logo View Left Window Grade Indicator.
6. Press Topcon Logo View Lower Window Lightbar.
7. Press and hold the polyline to use for steering, then press Steer to polyline on the pop-up menu;
3DMC Quick Reference Guide2-72
![Page 183: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/183.jpg)
Setting Blade Control
graphical cross lines display along the selected polyline.
8. Press Topcon Logo Control Steer indication to change the steer indication settings.
P/N 7010-0911 2-73
![Page 184: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/184.jpg)
mmGPS
9. Press Topcon Logo View Display options Alignment.
10.Change the alignment settings, and press OK.
3DMC Quick Reference Guide2-74
![Page 185: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/185.jpg)
Setting Blade Control
11.Begin steering.
Grading to Polyline1. Press Topcon Logo File Linework, select the
correct Linework file, and press Ok.
2. Press Topcon Logo View Display options Linework.
P/N 7010-0911 2-75
![Page 186: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/186.jpg)
mmGPS
3. Select the polylines to display, and press Ok.
4. On the main screen, press and hold the polyline to use for grading to, then press Grade to polyline on the pop-up menu. Graphical cross lines display along the polyline.
3DMC Quick Reference Guide2-76
![Page 187: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/187.jpg)
Setting Blade Control
5. Begin grading. As needed, repeat Step 4 above to grade to another polyline.
Adjusting Valve Gain1. On the 3DMC Main Screen, press the Elevation
Control key.
2. Press the Elevation valve gain Set key, changing it to red.
3. Change the offset using the up/down arrow.
4. Press Ok.
Elevation Control Key
P/N 7010-0911 2-77
![Page 188: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/188.jpg)
mmGPS
Changing Cut/Fill Offsets1. On the 3DMC Main Screen, press the Elevation
Control key.
2. Press Elevation set point Set, changing it to red.
3. Change the offset using the up/down arrows.
4. Press Ok.
Elevation Control Key
3DMC Quick Reference Guide2-78
![Page 189: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/189.jpg)
Setting Blade Control
Changing the Display View
Main Window ViewsTo access the main window view, press Topcon Logo View Main window, then press the necessary view; a check mark indicates the active view.
P/N 7010-0911 2-79
![Page 190: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/190.jpg)
mmGPS
Plan View Section View
Profile View
3DMC Quick Reference Guide2-80
![Page 191: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/191.jpg)
Setting Blade Control
Left Window ViewsTo access the lower window view, press Topcon Logo View Left window, then select a view.
Profile View
Section View
GradeIndicator
P/N 7010-0911 2-81
![Page 192: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/192.jpg)
mmGPS
Right Window ViewTo access the right window view, have the Plan view visible and press Topcon Logo View Right window, then select Grade indicator.
3DMC Quick Reference Guide2-82
![Page 193: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/193.jpg)
Setting Blade Control
Lower Window ViewsTo access the lower window view, press Topcon Logo View Lower window, then select a view.
Profile View
Section View
Lightbar
P/N 7010-0911 2-83
![Page 194: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/194.jpg)
mmGPS
Changing the Grade Indicator Scale and ExtentsTo view the grade indicator, press Topcon Logo View Left window Grade indicator.
3DMC Quick Reference Guide2-84
![Page 195: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/195.jpg)
Setting Blade Control
To change the grade display, press and hold the grade indicator for one second, press Grade display, then the necessary option.
To change the on-grade or extents, press and hold the grade indicator for one second, then press the necessary menu option.
Red=Fill
Arrow = Positionof Cutting Edge
Green =On-Grade
Blue = Cut
P/N 7010-0911 2-85
![Page 196: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/196.jpg)
mmGPS
Changing the Light Bar Scale and Extents To view the light bar scale, press Topcon Logo View Lower window Light bar.
3DMC Quick Reference Guide2-86
![Page 197: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/197.jpg)
Setting Blade Control
To change the light bar scale and extents: Press and hold the light bar scale for one second, then press Green, Yellow, or Extents to change the scale.
Changing the Steer Indication Scale and ExtentsThis function is only available while in Steer Indication mode. See “Changing Radio Channels” for details on enabling steer indication.
P/N 7010-0911 2-87
![Page 198: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/198.jpg)
mmGPS
To change the steer indication scale and extents: Press and hold the light bar scale for one second, then press Green, Yellow, or Extents to change the scale.
3DMC Quick Reference Guide2-88
![Page 199: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/199.jpg)
Setting Blade Control
Changing Display OptionsTo view available options, press TopconLogo View Display options.
P/N 7010-0911 2-89
![Page 200: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/200.jpg)
mmGPS
Control Points1. To view information about the control points, press
Topcon Logo View Display options Control Points.
2. Enable (check mark) or enter the necessary options, then press Ok.
3DMC Quick Reference Guide2-90
![Page 201: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/201.jpg)
Setting Blade Control
Working Surface Display Options1. When using a TIN surface model file, press
Topcon Logo View Display options Working Surface.
P/N 7010-0911 2-91
![Page 202: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/202.jpg)
mmGPS
2. Press Color to change the color of the alignment and station lines. Select a color and press Ok.
2a
2b
3DMC Quick Reference Guide2-92
![Page 203: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/203.jpg)
Setting Blade Control
3. Enable (check mark) or enter the necessary options, then press Ok.
P/N 7010-0911 2-93
![Page 204: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/204.jpg)
mmGPS
Alignment Display Options1. When using either a road surface model or an
alignment file, press Topcon Logo View Display options Alignment.
3DMC Quick Reference Guide2-94
![Page 205: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/205.jpg)
Setting Blade Control
2. Change the alignment settings, and press OK.
As-built Surface Display OptionsAs-built surface files display a colored map of the graded surface.
P/N 7010-0911 2-95
![Page 206: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/206.jpg)
mmGPS
1. Press Topcon Logo View Display options As-built Surface.
2. Select and/or enter the necessary options and press Ok.
3DMC Quick Reference Guide2-96
![Page 207: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/207.jpg)
Setting Blade Control
Linework Display Options1. When using a Linework file, press Topcon
Logo View Display options Linework.
2. To display layers on the Main Screen, select the layer and press Show, “Yes” displays in the Show column. Press Show again to not display the layer on the Main Screen; “No” displays in the Show column.
P/N 7010-0911 2-97
![Page 208: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/208.jpg)
mmGPS
3. Press Ok to return to the Main Screen.
3DMC Quick Reference Guide2-98
![Page 209: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/209.jpg)
Setting Blade Control
Point Display Options1. When using a Point file, press Topcon
Logo View Display options Points.
P/N 7010-0911 2-99
![Page 210: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/210.jpg)
mmGPS
2. To display a points layer on the main screen, select the layer and press Ok.
3. To display points symbols and/or point numbers during a topographic survey, select the corresponding check box and press Ok.
3DMC Quick Reference Guide2-100
![Page 211: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/211.jpg)
Setting Blade Control
Lightbar Display Options1. To set the lightbar display options, press Topcon
Logo View Display options Light bars.
P/N 7010-0911 2-101
![Page 212: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/212.jpg)
mmGPS
2. Set the LD-40 options, and press Ok.
3DMC Quick Reference Guide2-102
![Page 213: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/213.jpg)
Setting Blade Control
Changing the Background Color1. To change the background color of the Main
Screen, press Topcon Logo View Display options Background color.
2. Select a color and press Ok.
P/N 7010-0911 2-103
![Page 214: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/214.jpg)
mmGPS
Display Units Options1. To set the type of units used in the job, press
Topcon Logo View Display options Display units.
3DMC Quick Reference Guide2-104
![Page 215: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/215.jpg)
Setting Blade Control
2. Select the display unit options and press Ok.
Viewing and Updating 3DMC To view information about 3DMC, press Topcon Logo View About 3DMC.
P/N 7010-0911 2-105
![Page 216: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/216.jpg)
mmGPS
Options1. To view the enabled options, press Options on the
about 3DMC dialog box.
2. To modify 3DMC options, press Modify on the Options dialog box.
1
2
3DMC Quick Reference Guide2-106
![Page 217: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/217.jpg)
Setting Blade Control
3. Record the Device identification number to give to your Topcon representative. Contact your Topcon representative to obtain new authorization codes for the necessary applications.
4. When you have received the new authorization codes, enter the codes in the ControlBox dialog box.
5. Press Ok to apply the new codes and options. Press Ok on each screen to return to the main screen.
6. Turn off the display, wait a couple seconds, and then turn on the display to activate the new passwords.
P/N 7010-0911 2-107
![Page 218: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/218.jpg)
mmGPS
3DMC Quick Reference Guide2-108
![Page 219: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/219.jpg)
LPSLPS applications use an laser transmitter to transmit an optical laser beam at a pre-defined elevation, a “virtual stringline”, that represents the design surface. A laser sensor on the machine detects the beam and establishes the design elevation. Through the control box, the laser sensor keeps the cutting edge at the correct elevation.
LPS Components
Motor Grader
1. GX-60 Display
2. Remote Smart Knobs™
5
1
2
3
10
6
7
8
9
4
P/N 7010-0911 3-1
![Page 220: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/220.jpg)
LPS
3. Blade Slope Sensor
4. Rotation Sensor
5. Mainfall Sensor
6. Hydraulic Manifold Assembly
7. MC-R3 Controller
8. Prism
9. Robotic Total Station
10. GPS Vibration Pole
3DMC Quick Reference Guide3-2
![Page 221: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/221.jpg)
-
+
9063
-111
0-X
MC-
R3 /
M.F.
2
1
1
2
1
2
2
1
LEFTLO
WER
RAISE
LEFTRA
ISERIG
HT
LOW
ERRIG
HT
~
VALVE CABLES
GX-60
ATTACH TO UPPER CONNECTOR
GROUND TO CHASSIS
PRISM
MC-R3CONTROLLER
SMART KNOBS
GX-60
MAINFALL SENSOR
ROTATION SENSORRADIO ANTENNA
B
A
Slope Sensor
P/N 7010-0911 3-3
![Page 222: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/222.jpg)
LPS
Dozer
1. GX-60 Display
2. Simple Auto/Manual Knob
3. MC-R3 Controller
4. Hydraulic Manifold Assembly
5. Blade Slope Sensor
6. GPS Vibration Pole
7. Prism
9. Robotic Total Station
1
8
5
3
2
7
6
4
3DMC Quick Reference Guide3-4
![Page 223: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/223.jpg)
P/N 7010-0911 3-5
![Page 224: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/224.jpg)
LPS
3DMC LPS Introduction
3DMC Main Screen
Topcon Logo KeyThe Topcon Logo key at the top right corner of the Main Screen displays a pop-up bar of four menus: File, Control, Tools, and View.
To access the Topcon Logo menus, tap the Topcon Logo in the far right corner.
Slope Control Key
Zoom In
Topcon Logo Menu
Elevation Control Key
Zoom Out
3DMC Quick Reference Guide3-6
![Page 225: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/225.jpg)
Unless used, the menus disappear after 10 seconds.
Set-Points Pop-Up MenuThe Set-points pop-up menu allows quick adjustment of the elevation set-points from the main screen.
1. To access the Set-points pop-up menu, press and hold anywhere on the main screen.
2. Press Set-points Enabled (left) or Enabled (Right) to display the set-point adjustment arrows.
3. Press Set-points Increment to adjust the set-points increment.
Press Topcon Logo Key to view menus
P/N 7010-0911 3-7
![Page 226: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/226.jpg)
LPS
4. Press the arrows to adjust the elevation set-points.
IncreaseSet-points
DecreaseSet-points
3DMC Quick Reference Guide3-8
![Page 227: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/227.jpg)
Elevation Control Key
Adjust Elevation Screen
Cut/Fill Offset
Cut/Fill Reading
LPS Status Prism Status
Position Tab Search Tab
P/N 7010-0911 3-9
![Page 228: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/228.jpg)
LPS
Slope Control Key
Adjust Slope Screen
Keyboard FunctionsWhen entering text or numbers, one of the following two pop-up keyboards displays:
Angle of Blade
Type of Control Application
Design Cross Slope
AUTO Indicator
3DMC Quick Reference Guide3-10
![Page 229: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/229.jpg)
Alphanumeric Keyboard
1. To access the keyboard from any field requiring an alphanumeric input, press the field.
Backspace
Space Bar
Negative Sign
1
P/N 7010-0911 3-11
![Page 230: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/230.jpg)
LPS
2. Press the letters or numbers on the keyboard to type.
2
3DMC Quick Reference Guide3-12
![Page 231: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/231.jpg)
Numeric Keyboard
1. To access the keyboard from any field requiring an numeric input, press the field.
DecimalPoint
Accept Entry Cancel Entry
Backspace
Negative Sign
Increment Arrows
1
P/N 7010-0911 3-13
![Page 232: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/232.jpg)
LPS
2. Press the numbers on the keyboard to type in a value, or use the arrow keys to increase the value incrementally.
LPS Setup and Usage
Copying 3DMC FilesTo copy files from a USB key:
2
3DMC Quick Reference Guide3-14
![Page 233: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/233.jpg)
LPS Setup and Usage
1. Press the green power button to turn on the display and insert the USB key into the GX-60 USB port.
2. Press Topcon Logo File Control.
USB Port
P/N 7010-0911 3-15
![Page 234: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/234.jpg)
LPS
3. Press Copy and select the location of the file to copy from.
4. Select the file to copy and press Ok.
3a
3b
4a
4b
3DMC Quick Reference Guide3-16
![Page 235: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/235.jpg)
LPS Setup and Usage
5. Select the files and press Ok to apply the data to the current job.
Control Point Files
Selecting a Control Point File1. Press Topcon Logo File Control.
P/N 7010-0911 3-17
![Page 236: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/236.jpg)
LPS
2. Select the control point file for the jobsite and press Ok.
2a
2b
3DMC Quick Reference Guide3-18
![Page 237: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/237.jpg)
LPS Setup and Usage
Creating a Machine Configuration File1. When the main screen displays, press Topcon
Logo Control Machine setup.
P/N 7010-0911 3-19
![Page 238: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/238.jpg)
LPS
2. Press New.
3. Enter the machine information.
4. Press Next.
2
3DMC Quick Reference Guide3-20
![Page 239: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/239.jpg)
LPS Setup and Usage
5. Enter prism information, and press Next.
6. Press Finish to save the machine configuration file.
5
6
P/N 7010-0911 3-21
![Page 240: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/240.jpg)
LPS
7. Select a machine configuration file on the Machine files dialog box and press Ok to set this as the machine for the job.
Selecting Surface Files
Surface File TypesFlat Plane Surface/Sloping Plane Surface:
A planar (flat) surface with a 0% crossslope and mainfall. This surface is primarily used for building pads.
A sloping surface with cross slopes and mainfall based on a reference elevation.
11
3DMC Quick Reference Guide3-22
![Page 241: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/241.jpg)
Selecting Surface Files
As-built Surface File:
A color map of the graded surface.
TIN Surface File:
A TIN surface represents a surface as a network of non-overlapping triangles. Within each triangle the surface is represented by a plane. The triangles are made from a set of points called mass points.
Selecting a Working Surface File1. Press Topcon Logo File Surfaces Working.
2b
P/N 7010-0911 3-23
![Page 242: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/242.jpg)
LPS
2. Select the working surface file for the jobsite and press Ok.
Selecting a Reference Surface File1. Press TopconLogo File Surfaces Reference.
2
4b
3DMC Quick Reference Guide3-24
![Page 243: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/243.jpg)
Selecting Surface Files
2. Select the reference surface file for the jobsite and press Ok.
Selecting an As-built Surface FileAs-built surface files display a colored map of the graded surface.
1. Press TopconLogo File Surfaces As-built.
2
P/N 7010-0911 3-25
![Page 244: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/244.jpg)
LPS
2. Select the as-built surface file for the jobsite and press Ok.
Example:
2
3DMC Quick Reference Guide3-26
![Page 245: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/245.jpg)
Creating Surface Files
Creating Surface Files
Creating a New Plane Surface File 1. Press Topcon Logo File Surfaces Working,
Reference, or As-built.
2. Press New.
2
P/N 7010-0911 3-27
![Page 246: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/246.jpg)
LPS
3. Enter the name of the surface. Press Next.
Creating a Flat Plane Surface1. Press Topcon Logo File Surfaces Working
or Reference.
3
3DMC Quick Reference Guide3-28
![Page 247: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/247.jpg)
Creating Surface Files
2. Press New.
3. Enter the name of the new surface file. Press Next.
4. Move the machine to the elevation reference point.
P/N 7010-0911 3-29
![Page 248: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/248.jpg)
LPS
5. When the sensor is over the point, press Measure pt to measure the elevation reference point, and then Press Ok.
5b5a
3DMC Quick Reference Guide3-30
![Page 249: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/249.jpg)
Creating Surface Files
6. Enter a grid interval for the main screen. Press Next.
7. Press Finish to save the new surface file.
P/N 7010-0911 3-31
![Page 250: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/250.jpg)
LPS
Creating a Sloping Plane Surface1. Press Topcon Logo File Surfaces Working
or Reference
2. Press New.
3DMC Quick Reference Guide3-32
![Page 251: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/251.jpg)
Creating Surface Files
3. Enter the name of the new surface file. Press Next.
4. Move the machine to the elevation reference point.
5. Move the machine to point A and position the sensor on the cutting edge on the selected point.
P/N 7010-0911 3-33
![Page 252: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/252.jpg)
LPS
6. When the cutting edge rests on the point, press A to measure the point, and then press Ok.
6a
6b
3DMC Quick Reference Guide3-34
![Page 253: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/253.jpg)
Creating Surface Files
7. Move to point B and position the sensor on the cutting edge on the selected point.
8. When the cutting edge rests on the point, press B to measure the point, and then press Ok.
8a
8b
P/N 7010-0911 3-35
![Page 254: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/254.jpg)
LPS
9. Press the Crossfall Grade entry box and enter a crossfall.
10.Move the machine to the elevation reference point.
11.Press Measure pt. and then press Ok.
5b5a
3DMC Quick Reference Guide3-36
![Page 255: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/255.jpg)
Creating Surface Files
12.Enter a grid interval and crossfall. Press Next.
13.Press Finish to save the new surface file and end the process.
12a 12b
P/N 7010-0911 3-37
![Page 256: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/256.jpg)
LPS
Raising or Lowering the Existing SurfaceRaise/Lower the existing surface creates a new surface file based on an existing file.
1. Press Topcon Logo File Surfaces Working or Reference.
2. Press New.
3DMC Quick Reference Guide3-38
![Page 257: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/257.jpg)
Creating Surface Files
3. Enter the name of the new Raise/lower existing surface file. Press Next.
4. Select the surface to use as the reference from which to raise or lower the new surface.
5. Enter an elevation adjustment. Press Next.
6. Press Finish to save the new surface file.
4 5a
5b
P/N 7010-0911 3-39
![Page 258: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/258.jpg)
LPS
Selecting Jobsite Files1. From the main screen, navigate to the file type
dialog box.
• Topcon Logo File Linework
• Topcon Logo File Point files
3DMC Quick Reference Guide3-40
![Page 259: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/259.jpg)
Setting Blade Control Options
2. On the Linework/Point files dialog box, select the file for the jobsite and press Ok.
Setting Blade Control Options
Automatic Best-Fit Blade ControlWhen using the automatic best-fit method, 3DMC uses the entire cutting edge of the blade as the elevation reference.
2
P/N 7010-0911 3-41
![Page 260: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/260.jpg)
LPS
1. Press Topcon Logo Control Blade control.
2. Select Automatic best-fit (whole blade).
Control Using Single Point on BladeWhen using the control using single point on blade method, 3DMC uses a selected point on the blade to
3DMC Quick Reference Guide3-42
![Page 261: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/261.jpg)
Setting Blade Control Options
use as the elevation reference rather than the entire cutting edge of the blade.
1. Press Topcon Logo Control Blade control.
2. Select Control using single point on blade.
To quickly change the blade control point using the section view:
P/N 7010-0911 3-43
![Page 262: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/262.jpg)
LPS
• To move to the far left or far right edge of the blade, press and hold the edge of the blade for one second. On the pop-up menu, tap Move control left or Move control right.
• Press and hold a point on the blade for one second. On the pop-up menu, tap Move control.
To change the blade control point using the Control menu: 1. Press Topcon Logo Control Blade control.
2. With Control using single point on blade selected, hold the slider button and move it left or right to
3DMC Quick Reference Guide3-44
![Page 263: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/263.jpg)
Setting Blade Control Options
select a point at a distance from the left/right side of the blade.
3. Press OK to apply this blade control point to the machine.
Setting As-built Control OptionsAs-built files diplay a color map of the graded working surface.
P/N 7010-0911 3-45
![Page 264: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/264.jpg)
LPS
1. Press Topcon Logo Control As-built control.
2. Select the As-built options. Then press Advanced to view the advanced options.
3DMC Quick Reference Guide3-46
![Page 265: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/265.jpg)
Setting Blade Control Options
3. Select advanced options, and press Ok.
Example:
P/N 7010-0911 3-47
![Page 266: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/266.jpg)
LPS
Setting Steer Indication Options1. Press Topcon Logo Control Steer indication.
2. Set the steer indication options, and press OK.
3DMC Quick Reference Guide3-48
![Page 267: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/267.jpg)
Setting Blade Control Options
Valve Offset Calibration1. Raise the machine blade so that both sides of the
cutting edge rest a few inches above the ground.
2. At the display, tap Topcon Logo Control Valve offsets.
WARNINGWarning: Since the blade is about to move, automatically, HANDS and FEET should be clear of the blade!
3. Press Raise left Set and tap the arrows to increase or decrease the valve offsets.
P/N 7010-0911 3-49
![Page 268: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/268.jpg)
LPS
NOTICENotice: Boost Setting adjustments are not recommended and may cause poor machine performance.
4. Repeat Step 3 for each of the selections.
5. Press OK.
3
3DMC Quick Reference Guide3-50
![Page 269: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/269.jpg)
Steering or Grading to Polyline
Steering or Grading to Polyline
Steer to Polyline1. Press Topcon Logo File Linework.
2. Select the Linework file for the job, and Press Ok.
P/N 7010-0911 3-51
![Page 270: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/270.jpg)
LPS
3. Press Topcon Logo View Display options Linework.
4. Select the polylines to display.
3DMC Quick Reference Guide3-52
![Page 271: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/271.jpg)
Steering or Grading to Polyline
5. Press Topcon Logo View Left Window Grade Indicator.
6. Press Topcon Logo View Lower Window Lightbar.
7. Press and hold the polyline to use for steering, then press Steer to polyline on the pop-up menu;
P/N 7010-0911 3-53
![Page 272: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/272.jpg)
LPS
graphical cross lines display along the selected polyline.
8. Press Topcon Logo Control Steer indication to change the steer indication settings.
3DMC Quick Reference Guide3-54
![Page 273: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/273.jpg)
Steering or Grading to Polyline
9. Press Topcon Logo View Display options Alignment.
10.Change the alignment settings, and press OK.
P/N 7010-0911 3-55
![Page 274: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/274.jpg)
LPS
11.Begin steering.
Grading to Polyline1. Press Topcon Logo File Linework, select the
correct Linework file, and press Ok.
2. Press Topcon Logo View Display options Linework.
3DMC Quick Reference Guide3-56
![Page 275: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/275.jpg)
Steering or Grading to Polyline
3. Select the polylines to display, and press Ok.
4. On the main screen, press and hold the polyline to use for grading to, then press Grade to polyline on the pop-up menu. Graphical cross lines display along the polyline.
P/N 7010-0911 3-57
![Page 276: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/276.jpg)
LPS
5. Begin grading. As needed, repeat Step 4 above to grade to another polyline.
Performing Topographic Surveys1. Press Topcon Logo File Point files.
3DMC Quick Reference Guide3-58
![Page 277: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/277.jpg)
Steering or Grading to Polyline
2. Create a new point file or select an existing point file. Press Ok to return to the Main Screen.
3. Press Topcon Logo Tools Topo survey.
P/N 7010-0911 3-59
![Page 278: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/278.jpg)
LPS
4. Enter or select the information. Press Ok when done.
5. Press Ok to start the topo survey function.
6. Begin driving. When the machine begins to move, 3DMC will begin measuring and logging the data.
3DMC Quick Reference Guide3-60
![Page 279: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/279.jpg)
Steering or Grading to Polyline
7. To stop topo measurements, press Topcon Logo Stop topo survey. Otherwise, 3DMC continues logging measurements.
Checking the Blade’s Position1. To check the position of the blade, press Topcon
Logo Tools Position check.
P/N 7010-0911 3-61
![Page 280: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/280.jpg)
LPS
2. On the Position Check dialog box, select the Point of interest (either left edge or right edge of blade), and press Measure.
3. When finished, the Position Check dialog box displays the point on the job at the selected edge of
2a
2b
3DMC Quick Reference Guide3-62
![Page 281: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/281.jpg)
Steering or Grading to Polyline
the blade. Press Cancel to return to the Main Screen.
Changing Radio Channels1. Press Topcon Logo Tools Configure radios.
P/N 7010-0911 3-63
![Page 282: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/282.jpg)
LPS
2. Select the Radio type that matches the radio type in the MC-R3, and then press Configure. 3DMC will connect to the radio after several second.
3DMC Quick Reference Guide3-64
![Page 283: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/283.jpg)
Steering or Grading to Polyline
3. Enter radio configuration information, and select the channel. The channel must match the channel of the base station.
4. Press Advanced to select the country of operation, and then press Ok.
P/N 7010-0911 3-65
![Page 284: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/284.jpg)
LPS
5. Press Set to save the radio configuration settings and return to the GPS Radio Configuration screen.
6. Press Ok to save the radio configuration settings and return to the main screen.
Viewing LPS Information1. To view the LPS information dialog box and tabs,
press the Elevation control key.
Elevation Control Key
3DMC Quick Reference Guide3-66
![Page 285: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/285.jpg)
Steering or Grading to Polyline
2. Press the LPS info button.
P/N 7010-0911 3-67
![Page 286: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/286.jpg)
LPS
LPS Position
3DMC Quick Reference Guide3-68
![Page 287: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/287.jpg)
Steering or Grading to Polyline
LPS Search
Adjusting Valve Gain1. On the 3DMC Main Screen, press the Elevation
P/N 7010-0911 3-69
![Page 288: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/288.jpg)
LPS
Control key.
2. Press the Elevation valve gain Set key, changing it to red.
3. Change the offset using the up/down arrow.
4. Press Ok.
Elevation Control Key
3DMC Quick Reference Guide3-70
![Page 289: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/289.jpg)
Steering or Grading to Polyline
Changing Cut/Fill Offsets1. On the 3DMC Main Screen, press the Elevation
Control key.
2. Press Elevation set point Set, changing it to red.
3. Change the offset using the up/down arrows.
4. Press Ok.
Elevation Control Key
P/N 7010-0911 3-71
![Page 290: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/290.jpg)
LPS
Changing the Display View
Main Window ViewsTo access the main window view, press Topcon Logo View Main window, then press the necessary view; a check mark indicates the active view.
3DMC Quick Reference Guide3-72
![Page 291: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/291.jpg)
Steering or Grading to Polyline
Plan View Section View
Profile View
P/N 7010-0911 3-73
![Page 292: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/292.jpg)
LPS
Left Window ViewsTo access the lower window view, press Topcon Logo View Left window, then select a view.
Profile View
Section View
GradeIndicator
3DMC Quick Reference Guide3-74
![Page 293: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/293.jpg)
Steering or Grading to Polyline
Right Window ViewTo access the right window view, have the Plan view visible and press Topcon Logo View Right window, then select Grade indicator.
P/N 7010-0911 3-75
![Page 294: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/294.jpg)
LPS
Lower Window ViewsTo access the lower window view, press Topcon Logo View Lower window, then select a view.
Profile View
Section View
Lightbar
3DMC Quick Reference Guide3-76
![Page 295: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/295.jpg)
Steering or Grading to Polyline
Changing the Grade Indicator Scale and ExtentsTo view the grade indicator, press Topcon Logo View Left window Grade indicator.
P/N 7010-0911 3-77
![Page 296: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/296.jpg)
LPS
To change the grade display, press and hold the grade indicator for one second, press Grade display, then the necessary option.
To change the on-grade or extents, press and hold the grade indicator for one second, then press the necessary menu option.
Red=Fill
Arrow = Positionof Cutting Edge
Green =On-Grade
Blue = Cut
3DMC Quick Reference Guide3-78
![Page 297: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/297.jpg)
Steering or Grading to Polyline
Changing the Light Bar Scale and Extents To view the light bar scale, press Topcon Logo View Lower window Light bar.
P/N 7010-0911 3-79
![Page 298: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/298.jpg)
LPS
To change the light bar scale and extents: Press and hold the light bar scale for one second, then press Green, Yellow, or Extents to change the scale.
Changing the Steer Indication Scale and ExtentsThis function is only available while in Steer Indication mode. See “Steering or Grading to Polyline” for details on enabling steer indication.
3DMC Quick Reference Guide3-80
![Page 299: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/299.jpg)
Steering or Grading to Polyline
To change the steer indication scale and extents: Press and hold the light bar scale for one second, then press Green, Yellow, or Extents to change the scale.
P/N 7010-0911 3-81
![Page 300: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/300.jpg)
LPS
Changing Display OptionsTo view available options, press TopconLogo View Display options.
3DMC Quick Reference Guide3-82
![Page 301: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/301.jpg)
Steering or Grading to Polyline
Control Points1. To view information about the control points, press
Topcon Logo View Display options Control Points.
2. Enable (check mark) or enter the necessary options, then press Ok.
P/N 7010-0911 3-83
![Page 302: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/302.jpg)
LPS
Working Surface Display Options1. When using a TIN surface model file, press
Topcon Logo View Display options Working Surface.
3DMC Quick Reference Guide3-84
![Page 303: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/303.jpg)
Steering or Grading to Polyline
2. Press Color to change the color of the alignment and station lines. Select a color and press Ok.
2a
2b
P/N 7010-0911 3-85
![Page 304: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/304.jpg)
LPS
3. Enable (check mark) or enter the necessary options, then press Ok.
3DMC Quick Reference Guide3-86
![Page 305: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/305.jpg)
Steering or Grading to Polyline
Alignment Display Options1. When using either a road surface model or an
alignment file, press Topcon Logo View Display options Alignment.
P/N 7010-0911 3-87
![Page 306: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/306.jpg)
LPS
2. Change the alignment settings, and press OK.
As-built Surface Display OptionsAs-built files diplay a color map of the graded working surface.
3DMC Quick Reference Guide3-88
![Page 307: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/307.jpg)
Steering or Grading to Polyline
1. Press Topcon Logo View Display options As-built Surface.
2. Select and/or enter the necessary options and press Ok.
P/N 7010-0911 3-89
![Page 308: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/308.jpg)
LPS
Linework Display Options1. When using a Linework file, press Topcon
Logo View Display options Linework.
2. To display layers on the Main Screen, select the layer and press Show, “Yes” displays in the Show column. Press Show again to not display the layer on the Main Screen; “No” displays in the Show column.
3DMC Quick Reference Guide3-90
![Page 309: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/309.jpg)
Steering or Grading to Polyline
3. Press Ok to return to the Main Screen.
P/N 7010-0911 3-91
![Page 310: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/310.jpg)
LPS
Point Display Options1. When using a Point file, press Topcon
Logo View Display options Points.
3DMC Quick Reference Guide3-92
![Page 311: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/311.jpg)
Steering or Grading to Polyline
2. To display a points layer on the main screen, select the layer and press Ok.
3. To display points symbols and/or point numbers during a topographic survey, select the corresponding check box and press Ok.
P/N 7010-0911 3-93
![Page 312: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/312.jpg)
LPS
Lightbar Display Options1. To set the lightbar display options, press Topcon
Logo View Display options Light bars.
3DMC Quick Reference Guide3-94
![Page 313: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/313.jpg)
Steering or Grading to Polyline
2. Set the LD-40 options, and press Ok.
P/N 7010-0911 3-95
![Page 314: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/314.jpg)
LPS
Changing the Background Color1. To change the background color of the Main
Screen, press Topcon Logo View Display options Background color.
2. Select a color and press Ok.
3DMC Quick Reference Guide3-96
![Page 315: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/315.jpg)
Steering or Grading to Polyline
Display Units Options1. To set the type of units used in the job, press
Topcon Logo View Display options Display units.
P/N 7010-0911 3-97
![Page 316: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/316.jpg)
LPS
2. Select the display unit options and press Ok.
Viewing and Updating 3DMC To view information about 3DMC, press Topcon Logo View About 3DMC.
3DMC Quick Reference Guide3-98
![Page 317: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/317.jpg)
Steering or Grading to Polyline
Options1. To view the enabled options, press Options on the
about 3DMC dialog box.
2. To modify 3DMC options, press Modify on the Options dialog box.
1
2
P/N 7010-0911 3-99
![Page 318: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/318.jpg)
LPS
3. Record the Device identification number to give to your Topcon representative. Contact your Topcon representative to obtain new authorization codes for the necessary applications.
4. When you have received the new authorization codes, enter the codes in the ControlBox dialog box.
5. Press Ok to apply the new codes and options. Press Ok on each screen to return to the main screen.
6. Turn off the display, wait a couple seconds, and then turn on the display to activate the new passwords.
3DMC Quick Reference Guide3-100
![Page 319: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/319.jpg)
2D2D control applications consist of either a sonic tracker tracking a feature or stringline, or a laser receiver tracking a rotating laser. When 3DMC is in 2D mode, unnecessary functions are disabled for quick access to 2D-specific functions.
2D Components
Motor Grader
1. GX-60 Display
2. Remote Smart Knobs™
3. MC-R3 Controller
4. Blade Slope Sensor
1
2
4
7
8
10
3
6
5+
9
11
P/N 7010-0911 4-1
![Page 320: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/320.jpg)
2D
5. Rotation Sensor
6. Sonic Tracker
7. Vibration Pole
8. TrackerJack
9. Rotating Laser
10. Hydraulic Manifold Assembly
11. Mainfall Sensor
3DMC Quick Reference Guide4-2
![Page 321: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/321.jpg)
-
+
9063
-111
0-X
MC-
R3 /
M.F.
GX-60
ATTACH TO UPPER CONNECTOR
GROUND TO CHASSIS
TRACKERJACKOR SONIC TRACKER
MC-R3
SMART KNOBS
GX-60
MAINFALL SENSOR
ROTATION SENSORRADIO ANTENNA
B
A
SLOPESENSOR
CONTROLLER
2
1
1
2
1
2
2
1
LEFTLO
WER
RAISE
LEFTRA
ISERIG
HT
LOW
ERRIG
HT
~
VALVE CABLES
P/N 7010-0911 4-3
![Page 322: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/322.jpg)
2D
Dozer
1. GX-60 Display
2. Simple Auto/Manual Knob
3. MC-R3 Controller
4. Hydraulic Valves
5. Blade Slope Sensor
6. Sonic Tracker
7. Vibration Pole
8. TrackerJack
9. Rotating Laser
1
9
5
3
2
6
7
4
8
+
3DMC Quick Reference Guide4-4
![Page 323: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/323.jpg)
P/N 7010-0911 4-5
![Page 324: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/324.jpg)
2D
3DMC 2D Introduction
3DMC Main Screen
Topcon Logo KeyThe Topcon Logo key at the top right corner of the Main Screen displays a pop-up bar of four menus: File, Control, Tools, and View.
To access the Topcon Logo menus, tap the Topcon Logo in the far right corner.
Slope Control Key
Zoom In
Topcon Logo Menu
Elevation Control Key
Zoom Out
3DMC Quick Reference Guide4-6
![Page 325: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/325.jpg)
Unless used, the menus disappear after 10 seconds.
Set-Points Pop-Up MenuThe Set-points pop-up menu allows quick adjustment of the elevation set-points from the main screen.
1. To access the Set-points pop-up menu, press and hold anywhere on the main screen.
2. Press Set-points Enabled (left) or Enabled (Right) to display the set-point adjustment arrows.
3. Press Set-points Increment to adjust the set-points increment.
Press Topcon Logo Key to view menus
P/N 7010-0911 4-7
![Page 326: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/326.jpg)
2D
4. Press the arrows to adjust the elevation set-points.
IncreaseSet-points
DecreaseSet-points
3DMC Quick Reference Guide4-8
![Page 327: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/327.jpg)
Elevation Control Key
Adjust Elevation Screen
Slope Control Key
Cut/Fill Offset
Sensor Status
Angle of Blade
Type of Control Application
Design Cross Slope
P/N 7010-0911 4-9
![Page 328: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/328.jpg)
2D
Adjust Slope Screen
Keyboard FunctionsWhen entering text or numbers, one of the following two pop-up keyboards displays:
3DMC Quick Reference Guide4-10
![Page 329: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/329.jpg)
Alphanumeric Keyboard
1. To access the keyboard from any field requiring an alphanumeric input, press the field.
Backspace
Space Bar
Negative Sign
1
P/N 7010-0911 4-11
![Page 330: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/330.jpg)
2D
2. Press the letters or numbers on the keyboard to type.
2
3DMC Quick Reference Guide4-12
![Page 331: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/331.jpg)
Numeric Keyboard
1. To access the keyboard from any field requiring an numeric input, press the field.
DecimalPoint
Accept Entry Cancel Entry
Backspace
Negative Sign
Increment Arrows
1
P/N 7010-0911 4-13
![Page 332: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/332.jpg)
2D
2. Press the numbers on the keyboard to type in a value, or use the arrow keys to increase the value incrementally.
2D Setup and Usage
NOTICENotice: When using 3DMC for 2D control applications, only the equipment file is relevant to 2D Control applications. Other files, settings, and selections have no affect in this mode.
Copying 3DMC FilesTo copy files from a USB key:
2
3DMC Quick Reference Guide4-14
![Page 333: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/333.jpg)
2D Setup and Usage
1. Press the green power button to turn on the display and insert the USB key into the GX-60 USB port.
2. Press Topcon Logo File Control.
USB Port
P/N 7010-0911 4-15
![Page 334: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/334.jpg)
2D
3. Press Copy and select the location of the file to copy from.
4. Select the file to copy and press Ok.
3a
3b
4a
4b
3DMC Quick Reference Guide4-16
![Page 335: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/335.jpg)
2D Setup and Usage
5. Select the files and press Ok to apply the data to the current job.
Control Point Files
Selecting a Control Point File1. Press Topcon Logo File Control.
P/N 7010-0911 4-17
![Page 336: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/336.jpg)
2D
2. Select the control point file for the jobsite and press Ok.
2a
2b
3DMC Quick Reference Guide4-18
![Page 337: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/337.jpg)
2D Setup and Usage
Creating a Machine Configuration File1. When the main screen displays, press Topcon
Logo Control Machine setup.
P/N 7010-0911 4-19
![Page 338: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/338.jpg)
2D
2. Press New.
3. Enter the machine information.
4. Press Next.
2
3DMC Quick Reference Guide4-20
![Page 339: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/339.jpg)
2D Setup and Usage
5. Select and enter antenna information.
6. Press Next.
5
P/N 7010-0911 4-21
![Page 340: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/340.jpg)
2D
7. Select the GPS precisions for measuring static points. Press Next.
Low Precisions...
3DMC Quick Reference Guide4-22
![Page 341: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/341.jpg)
2D Setup and Usage
8. Enter the information for GPS Comms Configuration and press Next.
9. Select and enter radio information and press Next. Refer to the serial number/radio label on the MC-R3 controller to determine the correct radio type.
8
P/N 7010-0911 4-23
![Page 342: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/342.jpg)
2D
The radio type selection must match the radio contained in the MC-R3.
10.Press Finish to save the machine configuration file.
9
10
3DMC Quick Reference Guide4-24
![Page 343: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/343.jpg)
2D Setup and Usage
11.Select a machine configuration file on the Machine files dialog box and press Ok to set this as the machine for the job.
Activating 2D ControlTo activate 2D control, press Topcon Logo Control 2D control.
11
P/N 7010-0911 4-25
![Page 344: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/344.jpg)
2D
Locking On-GradeThe Survey button is used to quickly lock on-grade, performing the same function as the Remote Smart Knobs feature.
To lock the elevation on-grade: 1.
1. Press the Elevation Control key.
2. Press Survey to quickly lock on-grade.
3. Press Ok to return to the Main Screen.
To lock the slope on-grade: 1. Press the Slope Control key2. Press Survey to quickly lock on-grade.
3DMC Quick Reference Guide4-26
![Page 345: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/345.jpg)
2D Setup and Usage
3. Press Ok to return to the Main Screen.
Changing Control MethodsTo change the elevation side of the machine to slope: 1. Press the Elevation Control key
1
2
P/N 7010-0911 4-27
![Page 346: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/346.jpg)
2D
2. Press Change to Slope to use the slope method for control.
To change the slope side of the machine to elevation: 1.
1. Press the Slope Control key.
1
2
3DMC Quick Reference Guide4-28
![Page 347: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/347.jpg)
2D Setup and Usage
2. Press Change to Elev. to use the elevation method for control.
Changing the Display View
Main Window ViewsTo access the main window view, press Topcon Logo View Main window, then press the
1
2
P/N 7010-0911 4-29
![Page 348: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/348.jpg)
2D
necessary view; a check mark indicates the active view.
Plan View Section View
Profile View
3DMC Quick Reference Guide4-30
![Page 349: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/349.jpg)
2D Setup and Usage
Left Window ViewsTo access the lower window view, press Topcon Logo View Left window, then select a view.
Profile View
Section View
GradeIndicator
P/N 7010-0911 4-31
![Page 350: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/350.jpg)
2D
Right Window ViewTo access the right window view, have the Plan view visible and press Topcon Logo View Right window, then select Grade indicator.
3DMC Quick Reference Guide4-32
![Page 351: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/351.jpg)
2D Setup and Usage
Lower Window ViewsTo access the lower window view, press Topcon Logo View Lower window, then select a view.
Profile View
Section View
Lightbar
P/N 7010-0911 4-33
![Page 352: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/352.jpg)
2D
Changing the Grade Indicator Scale and ExtentsTo view the grade indicator, press Topcon Logo View Left window Grade indicator.
3DMC Quick Reference Guide4-34
![Page 353: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/353.jpg)
2D Setup and Usage
To change the grade display, press and hold the grade indicator for one second, press Grade display, then the necessary option.
To change the on-grade or extents, press and hold the grade indicator for one second, then press the necessary menu option.
Red=Fill
Arrow = Positionof Cutting Edge
Green =On-Grade
Blue = Cut
P/N 7010-0911 4-35
![Page 354: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/354.jpg)
2D
Changing the Light Bar Scale and Extents To view the light bar scale, press Topcon Logo View Lower window Light bar.
3DMC Quick Reference Guide4-36
![Page 355: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/355.jpg)
2D Setup and Usage
To change the light bar scale and extents: Press and hold the light bar scale for one second, then press Green, Yellow, or Extents to change the scale.
P/N 7010-0911 4-37
![Page 356: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/356.jpg)
2D
Changing Display OptionsTo view available options, press TopconLogo View Display options.
3DMC Quick Reference Guide4-38
![Page 357: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/357.jpg)
2D Setup and Usage
Control Points Display Options1. To view information about the control points, press
Topcon Logo View Display options Control Points.
2. Enable (check mark) or enter the necessary options, then press Ok.
P/N 7010-0911 4-39
![Page 358: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/358.jpg)
2D
Working Surface Display Options1. When using a TIN surface model file, press
Topcon Logo View Display options Working Surface.
3DMC Quick Reference Guide4-40
![Page 359: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/359.jpg)
2D Setup and Usage
2. Press Color to change the color of the alignment and station lines. Select a color and press Ok.
2a
2b
P/N 7010-0911 4-41
![Page 360: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/360.jpg)
2D
3. Enable (check mark) or enter the necessary options, then press Ok.
3DMC Quick Reference Guide4-42
![Page 361: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/361.jpg)
2D Setup and Usage
Alignment Display Options1. When using either a road surface model or an
alignment file, press Topcon Logo View Display options Alignment.
P/N 7010-0911 4-43
![Page 362: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/362.jpg)
2D
2. Change the alignment settings, and press OK.
As-built Surface Display OptionsAs-built surface files display a colored map of the graded surface.
3DMC Quick Reference Guide4-44
![Page 363: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/363.jpg)
2D Setup and Usage
1. Press Topcon Logo View Display options As-built.
2. Select and/or enter the necessary options and press Ok.
P/N 7010-0911 4-45
![Page 364: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/364.jpg)
2D
Linework Display Options1. When using a Linework file, press Topcon
Logo View Display options Linework.
2. To display layers on the Main Screen, select the layer and press Show, “Yes” displays in the Show column. Press Show again to not display the layer on the Main Screen; “No” displays in the Show column.
3DMC Quick Reference Guide4-46
![Page 365: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/365.jpg)
2D Setup and Usage
3. Press Ok to return to the Main Screen.
P/N 7010-0911 4-47
![Page 366: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/366.jpg)
2D
Point Display Options1. When using a Point file, press Topcon
Logo View Display options Points.
3DMC Quick Reference Guide4-48
![Page 367: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/367.jpg)
2D Setup and Usage
2. To display a points layer on the main screen, select the layer and press Ok.
3. To display points symbols and/or point numbers during a topographic survey, select the corresponding check box and press Ok.
P/N 7010-0911 4-49
![Page 368: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/368.jpg)
2D
Lightbar Display Options1. To set the lightbar display options, press Topcon
Logo View Display options Light bars.
3DMC Quick Reference Guide4-50
![Page 369: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/369.jpg)
2D Setup and Usage
2. Set the LD-40 options, and press Ok.
P/N 7010-0911 4-51
![Page 370: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/370.jpg)
2D
Changing the Background Color1. To change the background color of the Main
Screen, press Topcon Logo View Display options Background color.
2. Select a color and press Ok.
3DMC Quick Reference Guide4-52
![Page 371: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/371.jpg)
2D Setup and Usage
Display Units Options1. To set the type of units used in the job, press
Topcon Logo View Display options Display units.
P/N 7010-0911 4-53
![Page 372: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/372.jpg)
2D
2. Select the display unit options and press Ok.
Viewing and Updating 3DMC To view information about 3DMC, press Topcon Logo View About 3DMC.
3DMC Quick Reference Guide4-54
![Page 373: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/373.jpg)
2D Setup and Usage
Options1. To view the enabled options, press Options on the
about 3DMC dialog box.
2. To modify 3DMC options, press Modify on the Options dialog box.
1
2
P/N 7010-0911 4-55
![Page 374: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/374.jpg)
2D
3. Record the Device identification number to give to your Topcon representative. Contact your Topcon representative to obtain new authorization codes for the necessary applications.
4. When you have received the new authorization codes, enter the codes in the ControlBox dialog box.
5. Press Ok to apply the new codes and options. Press Ok on each screen to return to the main screen.
6. Turn off the display, wait a couple seconds, and then turn on the display to activate the new passwords.
3DMC Quick Reference Guide4-56
![Page 375: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/375.jpg)
TroubleshootingBefore contacting TPS Customer support about any problems, try the following and see the following sections:
• Check that the various components for your Topcon 3D Machine Control system (radio, MC-R3 Controller, GX-60 Display, Base Station receiver) have power and are powered up.
• Check that all cables are securely and properly connected to the various components of system.
• Disconnect cables and inspect them for damage or contamination. Clean all connections with an electrical contact cleaner.
Base StationThis section lists possible Base Station problems you may encounter (also refer to the Base Station’s documentation) for 3D Machine Control. If you still have problems after trying the solutions listed here, contact TPS customer support.
Problem
Receiver does not power on.
Causes Solutions
P/N 7010-0911 a-1
![Page 376: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/376.jpg)
Troubleshooting
The PWR button was pressed too quickly.
Make sure you hold the PWR button down for at least one second. A quick press will not activate the receiver.
The power cable is incorrectly connected or damaged.
Check that the power cable is correctly connected to the battery—RED to positive and BLACK to negative—and that the battery is charged.
Check that the RED dots on the power cable connector and the socket on the receiver are aligned, and the cable is pushed in as far as it can go.
If the power cable is damaged, contact your dealer to replace it.
Problem
Radio modem does not power on.
Causes Solutions
The power cable is incorrectly connected or damaged.
Check that the power cable is correctly connected to the battery—RED to positive and BLACK to negative—and that the battery is charged.
If the power cable is damaged, contact your dealer to purchase a new cable.
Product Type of Manuala-2
![Page 377: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/377.jpg)
The radio receives power through the receiver.
Some radios do not require a separate power supply, but are supplied power through the port on the receiver. For these radios, check that the receiver is also switched on.
Problem
Pocket-3D does not connect to receiver.
Causes Solutions
The receiver may be off.
Check that the receiver is switched on.
The cable may be incorrectly connected.
Check that the cable is connected to the COM port on the computer and Port A on the receiver.
If still no connection, try to reset the computer and repeat.
Problem
Pocket-3D is waiting for satellites.
Causes Solutions
The cable is incorrectly connected or damaged.
Check that the antenna cable is not cross-threaded and is screwed in all the way.
If the cable is damaged, contact your dealer to purchase a new cable.
P/N 7010-0911 a-3
![Page 378: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/378.jpg)
Troubleshooting
The antenna has poor PDOP.
Check that the antenna has a clear view of the sky.
The receiver is collecting an almanac.
If this is the first time connecting to the receiver, or if an internal reset has recently been performed, this message may persist for several minutes while the receiver obtains a new almanac.
Problem
Radio modem light is not flashing
Causes Solutions
The cable is incorrectly connected or damaged.
Check that the cable from the receiver is properly connected to the radio.
If the cable is damaged, contact your dealer to purchase a new cable.
The radio does not have a TX LED.
Some radios may not have a TX (Transmit) LED so the radio may in fact be functioning.
Product Type of Manuala-4
![Page 379: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/379.jpg)
The radio has a TX LED, but it is not yet flashing.
All radio types specifically listed for the Base Station kit have a TX light and should flash every second. It may take several seconds after connection for this flashing to commence.
P/N 7010-0911 a-5
![Page 380: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/380.jpg)
Troubleshooting
GX-60 DisplayThis section lists possible display problems you may encounter. If you still have problems after trying the solutions listed here, contact TPS customer support.
Problem
Display does not power on.
Causes Solutions
The cable is the wrong cable, incorrectly connected, or damaged.
Check that the power cable supplies 12 to 24 VDC and is negative conductive.
• A socket (positive) = 12 to 24 VDC
• E socket = Ground
Check that the power cable is connected to the correct port and the ends are securely fastened.
If the cable is damaged, contact your dealer to purchase a new cable.
Problem
Screen display turns off by itself.
Causes Solutions
Product Type of Manuala-6
![Page 381: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/381.jpg)
The fan may be damaged, causing the display to overheat.
Check that the fan is rotating.
If the fan is not rotating, it may be damaged and needs to be replaced with a new one. Contact your dealer.
Contact your dealer for information on replacing the fan.
Problem
Screen display goes dim by itself
Causes Solutions
The fan may not be rotating.
Check that the fan is rotating.
If the fan is not rotating, it may be damaged and needs to be replaced with a new one. Contact your dealer for information on replacing the fan.
The display has the self-adjusting ability of screen brightness.
Brightness may be dimmed when the display gets over-heated with high temperature around the cab, as well as when the ambient light becomes dim.
The backlight also reduces when the ambient light becomes dim.
Problem
Screen has transferred to operating system.
Causes Solutions
P/N 7010-0911 a-7
![Page 382: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/382.jpg)
Troubleshooting
“Exit 3DMC” function may have been pressed unexpectedly or incorrectly.
If the screen displays the desktop, the “My Computer” folder should be visible.
1. Double-tap “My Computer” folder.
2. Look for the folder named “Disk C”, and double-tap on it.
3. Look for the “Control Box” icon and double-tap. The application program opens and returns to the Main Screen.
Problem
“Control file has no GPS localization” message.
Causes Solutions
No GPS localization has been performed for the project.
Plan to implement the GPS localization.
An LPS application is the current job
Create or select the correct LPS Machine Configuration file so the Control Points file will require no GPS localization.
Problem
“Loading….” or “Building….” message.
Causes Solutions
Product Type of Manuala-8
![Page 383: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/383.jpg)
The program in the display is in the middle of loading files or making graphics.
If the pointer on the Main Screen moves, when you press in different places, the display is computing.
When the system is busy, the pointer becomes an hourglass.
Wait for a few more minutes to let it complete the process.
Remember, computing will take longer when a larger file is selected.
If the pointer does not move, the display may have a computing problem.
Switching off the display can fix the computing problem.
Problem
Elevation/Slope Control pad displays: “GPS receiver not connected!”
Causes Solutions
P/N 7010-0911 a-9
![Page 384: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/384.jpg)
Troubleshooting
Either the GPS+ signal or radio signal is invalid.
The graphic may indicate what causes the problem.
For GPS+ signal, check cable connections along the GPS antenna cable from the GPS Antenna port on the MC-R3 Controller to the Rover Antenna.
Check cable connections at the MC-R3 Controller and at the display.
Problem
Elevation Control key displays:
“Waiting for radio link”
Causes Solutions
Radio transmission, radio antenna, lights status on the receiver, and/or power may have a problem.
Check that the Base Station is working correctly.
Also check that the Rover Radio Antenna on the machine and its cable connections are properly connected.
Make sure that the radio channel is identical between the Base Station and the Machine Rover, and that the radio is correctly configured on the display.
Problem
Product Type of Manuala-10
![Page 385: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/385.jpg)
Elevation Control key displays:
“Waiting for Initialization”
Causes Solutions
The GPS+ receiver has not been successful tracking enough valid satellites.
Check that the Rover Antenna has a clear view of the sky.
Check for obstructions, such as trees, buildings, and vehicles, that can block or reflect satellite signals.
The system is still in the process of determining a solid position.
If this is the very first time operation, this message may persist for several minutes while the receiver obtains a new almanac.
Problem
Elevation Control key displays:
“Out of design area”
Causes Solutions
The machine is out of the Design Surface area.
Make sure that the correct Control Point File and Design Surface file is selected.
Move into the Design Surface area so the operator can start grading.
Problem
P/N 7010-0911 a-11
![Page 386: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/386.jpg)
Troubleshooting
Elevation Control key displays :
“No GPS localization”
Causes Solutions
The Control Points file currently selected has not been localized properly.
Make sure that the correct Control Point file currently is selected.
You are in a process of building a Control Point file or just starting the process.
Disregard the message until the localization is complete.
Problem
Slope Control key displays:
“Slope sensor not connected!”
Causes Solutions
Cross slope system is not connected properly.
Check cable connections display, the Mainfall Sensor, the Rotation Sensor and to the Blade Sensor.
Problem
Product Type of Manuala-12
![Page 387: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/387.jpg)
Elevation Control key displays:
“Waiting on data from GRT”
Causes Solutions
Problem
Elevation Control key displays:
“ELEV sensor not connected!”
Causes Solutions
Wrong control mode selected.
If in 3D GPS+, deactivate 2D Control Mode: select Topcon Logo Control 2D Control.
P/N 7010-0911 a-13
![Page 388: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/388.jpg)
Troubleshooting
MC-R3 Controller LED Status Chart
The CAN, Sensor, Control, and Auto LED’s in the chart below have a heartbeat to indicate proper operation of the processor.
Product Type of Manuala-14
![Page 389: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/389.jpg)
P/N 7010-0911 a-15
![Page 390: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/390.jpg)
Troubleshooting
This section lists possible MC-R3 Controller problems you may encounter. If you still have problems after trying the solutions listed here, contact TPS customer support.
Problem
All LEDs off.
Causes Solutions
The power cable may be incorrectly connected.
Power is supplied through the cable connected on the power port. Check that the cable is properly connected
The Display does not have power.
The MC-R3 Controller turns on only when the Display is also powered on.
Problem
Product Type of Manuala-16
![Page 391: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/391.jpg)
Satellite Status indicator does not flash green.
Causes Solutions
The cable is incorrectly connected or damaged.
Check that the antenna cable is not cross-threaded at the antenna and is connected to the intermediate cable installed on the machine.
Check the connection at the GPS Antenna port on the MC-R3 Controller.
If the cable is damaged, contact your dealer to purchase a new cable.
The antenna has poor PDOP.
Check that the Machine Antenna has a clear view of the sky.
The receiver is collecting an almanac.
If this is the first time connecting to the MC-R3 Controller, the LED may not flash for several minutes while the GPS receiver obtains a new almanac.
Problem
Radio Status indicator does not flash green.
Causes Solutions
The Base Station and/or Base Station radio has a problem.
Check that the Base Station is running correctly and the TX light on the radio modem flashes on.
P/N 7010-0911 a-17
![Page 392: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/392.jpg)
Troubleshooting
GPS LocalizationThis section lists possible GPS localization problems you may encounter. If you still have problems after
Different channels are used between the Base Station and the machine.
Check that the Base Station and Machine use the same radio channel.
• For the Base Station, use the button on the radio modem or use the “GPS Radio Configuration” program with the Pocket-3D connected. For the machine, use the Control Box function.
The antenna at the Rover or Base may be too low, incorrectly placed, or too far away.
If the green LED flashes when near the Base Station, but not when farther away, check that the Machine Radio Antenna mast is mounted vertically at the highest point on the machine.
If the machine gets too far from the Base Station, elevate the radio antenna at the Base Station or move it to a closer Control Point.
Product Type of Manuala-18
![Page 393: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/393.jpg)
trying the solutions listed here, contact TPS customer support.
Problem
Measurement takes too long.
Causes Solutions
The machine may be blocking satellite signals to the range-pole or tripod-mounted antenna.
Watch the status of the measurement screen. If the status indicates “waiting for satellites” move the machine away from the antenna.
The Control Point may be located too close to obstructions.
Move to an alternative Control Point or have the surveyor place a new Control Point away form the obstructions.
The MC-R3 Controller has not yet initialized; the system may be tracking many satellites.
The MC-R3 Controller may take several minutes to initialize.
The range-pole was unsteady.
Make sure that the pole is held steady while measurement is taking place. Any movement will make for a lengthy initialization and/or measurement.
Problem
P/N 7010-0911 a-19
![Page 394: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/394.jpg)
Troubleshooting
Localization produces large errors.
Causes Solutions
A typographical error occurred.
If errors are 10s or 100s of feet or meters, it is likely that a typographical error has occurred.
If coordinates are manually entered, check that longitudes are correctly prefixed with a minus sign if working in the western hemisphere (e.g., USA).
Re-enter the coordinates.
The range-pole was unsteady.
If the errors are decimeter level in magnitude, it may point to either inaccurately measured local site coordinates or not holding the range-pole vertical when measuring the GPS coordinates.
Inaccurate local site coordinates or erroneous GPS measurement.
If error values of the first few points are reasonable but increase when a new point is measured, the point just measured must have either inaccurate local site coordinates or erroneous GPS measurement.
Product Type of Manuala-20
![Page 395: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/395.jpg)
To isolate the error, disable horizontal and/or vertical localization for each Control Point in turn and observe the set of errors.
When the errors become acceptable due to certain isolation, the point isolated is most likely to detract from the quality of the localization.
Also, as a general rule, if error values of the first few points are reasonable but increase when a new point is measured, the point just measured must have either inaccurate local site coordinates or erroneous GPS measurement.
Once a problematic Control Point is discovered, try to re-measure the point again to see any improvement. If it is still suspect and affects the acceptable tolerance, the horizontal and/or vertical localization for this point may be disabled.
Problem
There are no H.Error and V.Error values.
P/N 7010-0911 a-21
![Page 396: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/396.jpg)
Troubleshooting
Blade ResponseThis section lists possible Blade Response problems you may encounter. If you still have problems after trying the solutions listed here, contact TPS customer support.
Causes Solutions
“Use for horizontal GPS localization” and/or “Use for vertical GPS localization” check boxes may not have been selected.
These check boxes need to be selected for a minimum of three points. Note that the error value will be calculated once three Control Points are measured and used for the GPS localization. This troubleshooting is useful when the Pocket-3D is being used to perform GPS localization as well as the display.
Problem
Blade is moving too slowly. The blade seems to move too slowly in Control Mode. The Grade Indicator takes too long to reach grade.
Causes Solutions
Product Type of Manuala-22
![Page 397: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/397.jpg)
The Valve Gain setting is too low.
Increase the Valve Gain setting, which will cause the hydraulics to respond quicker.
Check which control is slow before adjusting the Valve Gain. Remember that the larger number setting speeds up the response.
Problem
Blade is moving too fast. The blade seems to move too fast in Control Mode. The Grade Indicator skips through on-grade.
Causes Solutions
The Valve Gain setting is too high.
Decrease the Valve Gain setting, which will cause the hydraulics to respond slower.
Check which side control is fast before adjusting the Valve Gain. Remember that the lower number setting slows down the response.
Problem
Blade reacts, but does not reach On Grade
Causes Solutions
Valve Offsets are too small.
Assume that Valve Offsets are too small, and perform a Valve Offsets Calibration.
P/N 7010-0911 a-23
![Page 398: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/398.jpg)
Troubleshooting
Problem
Blade reacts, but overshoots around On Grade
Causes Solutions
Valve offsets are too large.
Assume that Valve Offsets are too large, and perform a Valve Offsets Calibration.
Product Type of Manuala-24
![Page 399: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/399.jpg)
General Precautions
Safety InformationIt is your responsibility to be completely familiar with the cautions described in this manual. These messages advise against the use of specific methods or procedures which can result in personal injury, damage to the equipment, or unsafe operating conditions. Remember, most accidents are caused by failure to observe basic safety precautions.
General Precautions1. Read and become familiar with the machine
manufacturer’s operating instructions, including safety information, before installing or using your Topcon equipment.
2. Use extreme caution on the job site. Working around heavy construction equipment can be dangerous.
3. DO NOT attach Topcon 3D Machine Control brackets or hose connections while the machine is running.
4. DO NOT allow any 3D Machine Control component to limit the visibility of the operator.
P/N 7010-0911 b-1
![Page 400: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/400.jpg)
Safety Information
5. Use Ty-wraps, supplied with 3D Machine Control, to keep hoses and wires secured and away from possible wear or pinch points.
6. Use eye protection whenever welding, cutting, or grinding is being done on the machine.
7. Protect yourself at all times, and wear protective clothing, when working on or near hydraulic lines. Hydraulic lines can be under extreme pressure, even when the machine is turned off.
WARNINGWarning: Relieve all pressure in the hydraulic lines before disconnecting or removing any lines, fittings or related components. If injury does occur, seek medical assistance immediately.
CAUTION
Caution: Avoid direct exposure to your eyes when using laser control. DO NOT stare into the laser beam or view the beam directly with optical equipment.
8. Use appropriate welding precautions and practices when welding. After welding, all paint all affected areas with a rust inhibitor
9. To prevent vandalism or theft, do not leave removable Topcon components on the machine at
Product Type of Manualb-2
![Page 401: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/401.jpg)
Radio Usage Information
night. Remove the components each evening and store appropriately in the Carrying Case.
10.Keep the Carrying Case dry at all times.If moisture does gent inside of the Carrying Case, leave it open and allow it to thoroughly dry before storing any components.
Radio Usage InformationDepending on the type of radio, users may need to obtain an FCC (Federal Communications Commission) license before operating a Topcon system (GPS RTK (Real-Time Kinematic) or simultaneous calculation of Global Positioning System and Global Navigation Satellite System). Check the sites listed below to determine if a license is needed before operating a Topcon system.
• The Federal Communications Commission is at:http://www.fcc.gov/
• The rules are at:http://www.access.gpo.gov/nara/cfr/waisidx_00/47cfr90_00.html
There have been many problems in the past with RTK base radio modems interfering with voice users. The issue finally culminated with the FCC refusing to grant licenses until something was done to ensure that surveyors did not interfere with voice users. The solution was to stop using frequencies in the 469MHz
P/N 7010-0911 b-3
![Page 402: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/402.jpg)
Safety Information
range, to add an identifier to the broadcast message, and other measures designed to minimize interference with voice users. The user and his employer are subject to fines of up to $82,500, confiscation of surveying equipment and legal action, if the rules are ignored.
Topcon cannot obtain the license for the user. There are companies to assist with licensing. Two are listed here:
• Professional Licensing Consultants Inc.P.O. Box 1714Rockville, MD 20849-1714
• Atlas License Company and Data Services1725-A North Shadeland AvenueIndianapolis, IN 46219
http://www.alcds.com/
General Usage Warnings
CAUTION
Caution: If any Topcon 3D Machine Control component has been dropped, altered, transported or shipped without proper packaging, or otherwise treated without care, erroneous measurements, calculations, or display may occur. Periodically test 3D Machine Control components to ensure accurate measurements and operation.
Product Type of Manualb-4
![Page 403: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/403.jpg)
Base Station Precautions
Inform TPS immediately if any product does not function properly.
WARNINGWarning: The LCD display can be damaged if struck with sufficient force.
Base Station Precautions
CAUTION
Caution: TPS receivers are designed for machine control, survey, and survey related uses (i.e., surveying coordinates, distances, angles and depths, and recording such measurements). This product should never be used:
Without the user thoroughly understanding this manual.
After disabling safety systems or altering the product.
With unauthorized accessories.
Without proper safeguards at the survey site.
Contrary to applicable laws, rules, and regulations.
P/N 7010-0911 b-5
![Page 404: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/404.jpg)
Safety Information
WARNINGWarning: TPS receivers should never be used in dangerous environments. Use in rain or snow for a limited period is permitted.
Internal Battery Pack Warnings
WARNINGWarning: Tampering with the internal batteries by end users or non-factory authorized technicians will void the receiver’s warranty.
Do not attempt to open the battery pack or replace it.
Do not disassemble the battery pack.
Do not charge in conditions different than specified.
Do not use other than the specified battery charger.
Do not short circuit.
Do not crush or modify
Product Type of Manualb-6
![Page 405: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/405.jpg)
Internal Battery Pack Warnings
WARNINGWarning: Never attempt to open the receiver’s casing or replace the batteries! Lithium-Ion batteries can be dangerous if mishandled!
WARNINGWarning: Do not incinerate or heat battery pack above 212 degrees fahrenheit (100 degrees celsius). Excessive heat can cause serious damage and possible explosion.
Mercury WarningThe LCD display in the GX-60 Topcon display contains mercury. The display should not be disposed of or placed in a waste stream destined for disposal until the mercury is removed and reused, recycled, or otherwise managed to ensure that the mercury in the product does not become mixed with other solid waste or wastewater.
P/N 7010-0911 b-7
![Page 406: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/406.jpg)
Safety Information
EU-Member Warning
Product Type of Manualb-8
![Page 407: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/407.jpg)
![Page 408: 3DMC Quick Reference Guide - topconcare.com€¦ · Topcon Logo Menu Elevation Control Key Zoom Out Press Topcon Logo Key to view menus. P/N 7010-0911 1-7 Set-Points Pop-Up Menu The](https://reader030.vdocument.in/reader030/viewer/2022012905/5f75bdb3db7d4171a86375d4/html5/thumbnails/408.jpg)
Topcon Positioning Systems, Inc.7400 National Drive, Livermore, CA 94550
800∙443∙4567 www.topconpositioning.com
ISO 9001:2000FM 68448
3DMC Quick Reference Guide
P/N: 7010-0911 Rev A 10/08
©2008 Topcon Corporation All rights reserved. No unauthorized duplication.