3s-1191 user guide - 3sixt · true wireless earbuds by pushing and holding down the on/off buttons...
TRANSCRIPT
FUSION STUDIO TRUE WIRELESS EARBUDS3S-1191 (For models from June 2019)
USER GUIDE
IMPORTANT SAFETY INFORMATION• Read all instructions and warnings before using the 3SIXT
Fusion Studio True Wireless Earbuds. Improper use of this product may result in product damage, excessive heat, toxic fumes, fire or explosion, for which damages you (“Purchaser”) and not 3SIXT (“Manufacturer”) are responsible.
• Do not store the accessory in a high-temperature environment, including heat caused by intense sunlight or other forms of heat (heaters etc.).
• Do not place any parts of the device in fire or other extremely hot environments.
• Do not disassemble or modify the accessory in any manner. • Do not attempt to power this device using any other method
than as instructed explicitly in this user guide. • Use caution and follow applicable laws regarding mobile
phones and the 3SIXT Fusion Studio True Wireless Earbuds use, if using the device for phone calls while driving.
• Be aware of your surrounds while using your 3SIXT Fusion Studio True Wireless Earbuds, not doing so could lead to damage to property, others of yourself.
• Do not use the 3SIXT Fusion Studio True Wireless Earbuds at high volume for an extended period. Use your earbuds at a comfortable, moderate volume level to avoid potential hearing damage. Turn the volume down on your device before placing the earbuds into your ears, then turn the volume up gradually until you reach a comfortable listening level.
• This accessory is intended for adults, not minors or pets. 3SIXT Fusion Studio True Wireless Earbuds contain a lithium-ion battery and may be hazardous if swallowed. If ingested, seek immediate medical attention by calling your relevant emergency service.
• Do not submerge or expose the earbuds to water.
3
WelcomeThank you for purchasing the 3SIXT Fusion Studio True Wireless Earbuds. The 3SIXT Fusion Studio True Wireless Earbuds come full of great features, and this guide will allow you understanding around how to operate them safely.
For more information and support, visit www.3sixtgear.com
4
PACKAGE CONTENTS
2 X TWS Earbuds
USB-A to Micro USB cable – Black
Wireless Induction Charging Case
3 X Pairs Assorted Sized Earbuds
User Guide
5
THE BASICS
Buttons, Ports & Lights1. Charging Case
2. TWS Earbud
3. Charging Port
4. Wireless Induction Charging Base
5. Built-in Mic
6. LED Light Indicators
7. LED Ring Indicator
8. Left Power On/Off/Pair /Skip/Pause/Voice Assistant
9. Right Power On/Off/Pair /Skip/Voice Assistant
1
5 9
3 4
382
7
6
6
Turning on the device
1. Remove the 3SIXT Fusion Studio True Wireless Earbuds from the charging case (1).
2. Push and hold down the on/off buttons (8 & 9) simultaneously for 2 seconds.
3. An audio confirmation via the earbuds will play when the 3SIXT Fusion Studio True Wireless Earbuds are turned on.
Turning off the device
Push and hold down the on/off buttons (8 & 9) for 4 seconds simultaneously on your 3SIXT Fusion Studio True Wireless Earbuds.
OPERATION INSTRUCTIONS
8
8
9
9
2 x sec
4 x sec
7
New Device Pairing
1. If not already paired to a device, the 3SIXT Fusion Studio True Wireless Earbuds automatically set themselves into pairing mode.
2. Within your device’s Bluetooth settings, enable Bluetooth and look for the device name, ‘3S-1191‘.
3. If prompted to enter a code use, ‘0000’ and accept the 3SIXT Fusion Studio True Wireless Earbuds/device access approval notification.
4. In the event of a successful pairing, an audio confirmation via the earbuds will play.
OPERATION INSTRUCTIONS
3S-1191
0000
8
Additional Device PairingThe 3SIXT Fusion Studio True Wireless Earbuds can pair with up to 8 devices.
1. Turn on the 3SIXT Fusion Studio True Wireless Earbuds by pushing and holding down the on/off buttons (8 & 9) simultaneously for 2 seconds.
2. Ensure that the initially paired device is off or out of range of the 3SIXT Fusion Studio True Wireless Earbuds.
3. If no connection is detected, the 3SIXT Fusion Studio True Wireless Earbuds automatically set themselves into pairing mode.
OPERATION INSTRUCTIONS
8 9
off on
device 2device 1
2 x sec
9
4. Within your additional device’s Bluetooth settings enable Bluetooth and look for the device name, ‘3S-1191‘.
5. If prompted to enter a code use, ‘0000’ and accept the 3SIXT Fusion Studio True Wireless Earbuds/device access approval notification.
6. In the event of a successful pairing, an audio confirmation via the earbuds will play.
Note: Randomised device pairing, can occur when turning on the 3SIXT Fusion Studio True Wireless Earbuds in the proximity of several paired devices. The 3SIXT Fusion Studio True Wireless Earbuds will randomly try to prioritise a single device. Ensure all devices you do not wish to pair, have the Bluetooth setting in the off position or are out of range.
OPERATION INSTRUCTIONS
3S-1191
0000
10
Skipping Track Forward & Back
While on and playing music with your 3SIXT Fusion Studio True Wireless Earbuds, double press either on/off buttons (8 or 9) to skip forward.
Volume Up & Down
Press either on/off buttons (8 or 9) double press and hold to scale volume up and down accordingly to suit your preference.
Pausing
1. While on and playing music with your 3SIXT Fusion Studio True Wireless Earbuds, press either on/off buttons (8 or 9) once to pause play.
2. To resume playing music press either on/off buttons (8 or 9) once to play.
OPERATION INSTRUCTIONS
press twice to skip
press twice & hold to volume adjust
press once to pause
press once to play
11
OPERATION INSTRUCTIONSDevice Smart Assistant
1. While turned on press either on/off buttons (8 or 9) three times to initiate your smart device voice assistant through your 3SIXT Fusion Studio True Wireless Earbuds.
2. Press either on/off buttons three times to cancel voice assistant.
Answer Call
When your device rings through the 3SIXT Fusion TWS Earbuds, press either on/off (8 or 9) button once to pick up.
Hangup a Call
When your call is finished press either on/off (8 or 9) button once to hangup.
Reject a Call
When your device rings through the 3SIXT Fusion TWS Earbuds and you would like to reject the call, double press either on/off (8 or 9) button.
8 9press 3 times
press once to answer
press once to hangup
press twice to reject
12
Apply Selected EarbudsThe 3SIXT Fusion Studio True Wireless Earbuds come with 3 pairs of silicone earbud tips in different sizes to fit depending on the size of your inner ear. Applying is easy.
1. Select the silicone earbud tips to match your inner ear best.
2. Line up one of the silicone earbud tips and the 3SIXT Fusion Studio True Wireless Earbuds. Push the silicone earbud tip into place until the silicone bud is just past the lip of the 3SIXT Fusion Studio True Wireless Earbuds.
3. Repeat on the other earbud.
Note: Store the extra pairs away in a safe place, so you can use them if you ever misplace your chosen set.
OPERATION INSTRUCTIONS
SML MED LRG
13
LED INDICATORS3SIXT Fusion Studio True Wireless Earbud LED’sEach Earbud has an LED Ring
Pairing Status
Blue/White LED flashing Pairing mode
Connecting Status
Blue LED flashing (every 7 sec) Connecting mode
Turning Off Status
White LED flashes once then turns off
Earbuds Charging Status
White LED solid when inserted into charging case and charging
3SIXT Fusion Charging CaseWhen the earbuds are inserted magnets guide them into place and automatically trigger charging
Charging Case Status
LED light flashing x 1 1% - 25% battery
LED light flashing x 2 25% - 50% battery
LED light flashing x 3 50% - 75% battery
LED light flashing x 4 75% - 100% battery
LED light solid Battery Charged 100%
LED Ring
4 x LED Lights
14
CHARGING METHODS
1. The Charge Case uses wireless technology (4). All you need to do is place the charge case on any wireless charge pad for charging to commence immediately. Ensure the earbuds are inserted into the case.
2. The Charge Case has a Micro USB input (3) for standard cable charging. Use a USB-A to Micro USB cable (included) by plugging the Micro USB connector into the charge case and the USB-A Connector into any wall charger, car charger or computer to charge immediately. Ensure the earbuds are inserted into the case.
15
Power input Micro USB 5V 1.0A | Wireless 5WIngress Rating IPX4 Splash Proof (Earbuds only)
Battery Charge Case: Polymer Lithium 3.7v/500mAh Earbuds: 50mAh
Wireless Protocol BT v5.0Distance Up to 10mAudio Output 5mWUnit 10 mm x 2Playback Time Play: 2-3 hours | Talk: 2 hoursStandby Time 50 hours
Charge Time
Charge Case: 1-2 hours Earbuds: 45-60 mins*The earbuds and charging case battery can be recharged more than 500 times; after that time the battery will only charge around 70% of initial capacity.
Earbuds charging in Charge Case
3-4 times (4th time only 60-70% battery charge)
Frequency Range 20Hz-20KHzDistortionTHD ~1%Operating Temperature -10°C - 55°C / Humidity: 0% -85%
Storage Temperature -20°C - 60° C / Humidity: 0% -90%
Microphone / Speaker Built-In
Dimensions Charge Case: 105 x 47 x 30 mm
Weight 2 X Earbuds: 15.6g | Charge Case: 33g Total: 48.6g
TECH SPECS
16
LIABILITY NOTICELIABILITY NOTICEWe reserve the right to printing errors and changes to product, packaging or product documentation.• See our terms of the warranty. These are available in their
current form by the importer of record in each region where the item is sold.
DISPOSALParts of this unit contain materials that are recyclable. Certain waste companies specialise in recycling these parts. Dispose of the components in compliance with all applicable regions regulations. Contact your local waste management authority for more detailed information about recycling this product.
DISPOSAL (Applicable for EU countries)This symbol on the product, or in the operating instructions, or on the packaging indicates that the product must not be included as general household waste.
According to the European WEEE directive, electrical and electronic equipment must not be disposed of with consumers waste. Its components must be recycled or disposed separately of general household waste. Otherwise, contaminative and hazardous substances can pollute the environment and adversely affect human health.As a consumer, you are committed by law to dispose of electrical and electronic devices to the producer, the dealer, or public collecting points at the end of the devices lifetime. This kind of waste separation, application, and recycling of materials help with conserving natural resources critical to environmental protection. WEEE No: 82898622
EU DECLARATION OF CONFORMITYWith the CE sign, 3SIXT, an imported brand of Wentronic GmbH ensures, that the product is conformed to the basic European standards and directives.
17
WARRANTY
AUSTRALIA & NEW ZEALAND TWO YEAR WARRANTY3SIXT will replace the faulty product at no cost to the consumer. The warranty does not extend to any consequential damages or costs that may be incurred and is valid for TWO YEARS from date of purchase. The consumer must return the faulty product to the retail store it was purchased from together with proof of purchase. The benefits to the consumer under this warranty are in addition to other rights and remedies of the consumer under Australian and New Zealand laws in relation to the goods to which the warranty relates. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The warranty is provided by: Cellnet Limited (in Australia): 59-61 Qantas Drive, Eagle Farm, Queensland 4009. Ph: 1300 CELLNET (1300 235 563). Email: [email protected]. Cellnet Limited (in New Zealand): 10a Orbit Drive, Rosedale, Auckland 0632. Ph: 0800 CELLNET (0800 235 563), Email: [email protected] more detailed warranty information, please visit:www.3sixtgear.com/warranty-policy
18
WARRANTY
EUROPE WARRANTYThis warranty is by Wentronic GmbH. Wentronic GmbH offer the manufacturer’s warranty in addition to the legal guarantee of this 3SIXT product. This warranty applies to products in the following countries: Germany, France, Ireland, Italy, Luxembourg, Austria, Switzerland, or United Kingdom. The warranty does not extend to any consequential damages or costs that may be incurred. Defects and damages resulting from misuse, wear parts and consumables are excluded from the warranty. Damage which is not caused to the product itself, is also not covered under the warranty. Claims due to the neglect of duties, misuse on manipulations and claims for reimbursement of expenses are excluded against us or our agents under the warranty; This also applies to claims for compensation of consequential damages. The restrictions, mentioned above, do not apply to statutory rights of the consumer of a purchase of consumer goods or claims of damages resulting from injury to life, body or health, intentionally or by gross negligence, or under the Product Liability Act (ProdHaftG Germany). The warranty is void for improper use of the product. The warranty does not extend the guarantee period or initiate a new guarantee. The statutory guarantee rights are not affected by this warranty but are available fully unchanged to the buyer in addition. The warranty is provided by: Wentronic GmbH: Pillmannstraße 12, 38112 Braunschweig, Hotline: +49 (0531) 210 58-0 (0.14€ per minute within Germany. Max 0.42€ per minute from mobiles), Email: [email protected], Web: www.wentronic.deFor more detailed warranty information, please visit:www.3sixtgear.com/warranty-policy-eu
EN
DE
FR
ES
IT
EU PRODUCT SUPPORT
3SIXT PRODUCT SUPPORT For more information, visit www.3sixtgear.com/support
3SIXT PRODUKT-SUPPORT Bitte besuchen Sie www.3sixtgear.com/support
ASSISTANCE PRODUIT 3SIXT Veuillez consulter www.3sixtgear.com/support
ASISTENCIA TÉCNICA DEL PRODUCTO 3SIXT Visite www.3sixtgear.com/support
ASSISTENZA TECNICA 3SIXT Si prega di visitare www.3sixtgear.com/support
Copyright © 2018.3SIXT and its logo are trademarks of Cellnet Group Limited
in Australia & New Zealand. All Rights Reserved.CELLNET GROUP LIMITED
59-61 Qantas Drive, Eagle Farm, QLD 4009 Australia. MADE IN CHINA.
3SIXTgear.com
For more information, visit www.3sixtgear.comor visit www.3sixtgear.com/support
3SIXTgear
3S-1191