3uhplhu +rph 6hulhv o [ n 6l]h · felt paper : to cover double headers and sills floor joists :...

6

Upload: others

Post on 16-May-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: 3UHPLHU +RPH 6HULHV o [ n 6L]H · Felt paper : To cover double headers and sills Floor joists : 2x10 spruce 16”O.C. (On Center) Hardware : Floor joist hangers; metal cross bridging
Page 2: 3UHPLHU +RPH 6HULHV o [ n 6L]H · Felt paper : To cover double headers and sills Floor joists : 2x10 spruce 16”O.C. (On Center) Hardware : Floor joist hangers; metal cross bridging

Optional Design Ideas:

With built-in shelving, the right side of the laundry area can be utilized as a fantastic walk-in kitchen pantry

----------The double closets in the first floor master The double closets in the first floor master bedroom can be combined into a single

large closet----------

Enlarge the area between the dining area and living room for a more open floorplan

----------Move the stove and remove the wall at Move the stove and remove the wall at the right of the kitchen to allow for a breakfast bar/peninsula design

----------Make bath #1 a 1/2 bath for guests Make bath #1 a 1/2 bath for guests accessible from the hall. Now, both

closets just under the ref. area can grow in size AND you can now create a massive first floor master bedroom suite!

Premier Home Series-----

28’ x 40‘ Size-----

2,108 Square Feet-----

Three Bedrooms Three Bedrooms -----

Two and a Half Baths-----

2018 Material package price $132,010

Page 3: 3UHPLHU +RPH 6HULHV o [ n 6L]H · Felt paper : To cover double headers and sills Floor joists : 2x10 spruce 16”O.C. (On Center) Hardware : Floor joist hangers; metal cross bridging
Page 4: 3UHPLHU +RPH 6HULHV o [ n 6L]H · Felt paper : To cover double headers and sills Floor joists : 2x10 spruce 16”O.C. (On Center) Hardware : Floor joist hangers; metal cross bridging
Page 5: 3UHPLHU +RPH 6HULHV o [ n 6L]H · Felt paper : To cover double headers and sills Floor joists : 2x10 spruce 16”O.C. (On Center) Hardware : Floor joist hangers; metal cross bridging

1 & 2 Bedroom 6”x 8” D

Carbondale w/o daylight basement $129,665

Davenport $81,405

Eagle’s Nest $59,205

Lucerne $67,475

Retreat $62,930

Rockwood $71,470

Summit $76,745

3 Bedroom 6”x 8” D

A-Frame $95,585

Belmont $183,815

Berkshire $87,605

Brookfield w/o daylight basement $124,695

Burlington $98,855

Cambridge $133,995 w/o garage $117,295

Concord $122,625 w/o breezeway & garage $90,575

Crestmont $146,150

Hancock $108,770

Premier Price List 4 & 5 Bedroom 6”x 8” D

Aspen $161,255

Bedford $112,935

Bingham $159,375

Bristol $192,985

Greenville $119,870

New Bedford $125,745

The Garages 6”x 8” D

Gambrel Garage 26’x32’ Solid Log w/Log Siding Gables $43,665 Log Siding $32,930

Standard Garage 24’x24’ Solid Log w/Solid Log Gables $28,795 Log Siding $19,695

Standard Garage 34’x24’ Solid Log w/Solid Log Gables $32,810 Log Siding $22,220

www.northeasternlog.com

3 Bedroom (continued) 6”x 8” D

Harborside $125,140

Kentuckian $119,320

Kineo $84,710

Kingston $89,505

Lexington $238,745

Nantucket $89,575

Newport $100,165

Oakridge $132,010

Rangeley $98,375

Regal $106,595

Sherwood $126,945

Springfield $100,635

Tennessean $161,785

Trenton $109,480

Westfield $167,250 w/o garage & mudroom $133,995

Winthrop $125,525

Yarmouth $147,950

Northeastern Log Homes, Kenduskeag, Maine 1-800-624-2797 All Prices F.O.B. Kenduskeag, Maine Effective January 1, 2018 ©NLH 2018

*Pricing available

upon request

Page 6: 3UHPLHU +RPH 6HULHV o [ n 6L]H · Felt paper : To cover double headers and sills Floor joists : 2x10 spruce 16”O.C. (On Center) Hardware : Floor joist hangers; metal cross bridging

PREMIER SERIES MATERIALS PACKAGEPREMIER SERIES MATERIALS PACKAGEPREMIER SERIES MATERIALS PACKAGEPREMIER SERIES MATERIALS PACKAGE

FLOOR SYSTEM

Sills: 2x6 PTSYP (graded #1 Pressure Treated South-ern Yellow Pine)

Girders: 2x10 or LVL (Laminated Veneer Lumber) built up on site

Double headers: 2x8 or 2x10 spruce as required

Felt paper: To cover double headers and sills

Floor joists: 2x10 spruce 16”O.C. (On Center)

Hardware: Floor joist hangers; metal cross bridging

Subfloor: 3/4” T&G (Tongue & Groove) AdvanTech®

Porch and deck floor framing: Floor joist, sills and headers 2x6, 2x8, 0r 2x10 PTSYP

Porch and deck flooring: 5/4x6 radius edge PTSYP

Porch posts

EXTERIOR WALLS

Wall and gable logs: Eastern White Pine, Premier grade, milled 6x8 “D” shaped tongue and groove pre-cut and numbered logs, kiln dried.

Log Sealants: Log caulking; foam gaskets; pre-compressed corner pads; 11” LogHog® Screws

Window and door jambs: Specially-milled pine with 9” screws

Log siding: Milled ship-lap log siding as needed for floor frame skirting. Eastern White Pine, kiln dried

Wall braces: 6x6, 6x8, 6x10, or 6x12 pine or spruce as required with hardware

Splined posts: Specially milled 6x6 as required with hardware

2 sets of construction documents

Construction manual

INTERIOR PARTITIONS

Framing: 2x4 or 2x6 shoe double plate, studs, block-ing, headers, and fillers as necessary

Pilaster stud with hardware

1” knotty pine v-match boards for sheathing first and second floor partitions on both sides

Posts and beams: Pine, spruce, or LVL as required with hardware

CEILING

Ceiling joists: Graded 4x8 spruce beam ceiling joists (hangers supplied when required). NOTE: 1” knotty pine v-match boards supplied for ceiling when not used for loft area

Floor: 2” v-match flooring for all loft areas (loft floor-ing & ceiling sheathing applied on top of 4x8 beams)

ROOF

Pre-cut trusses: 6x6 and 6x8 spruce, pre-drilled and complete with gusset plates and fasteners

Pre-built truss rafters: NOTE: We do not supply tem-porary or permanent bracing.

Roof purlins: Graded 4x8 spruce, pre-cut

4x6 Ledgers with hardware

4x8 blocking with fasteners

First roof boards: 1” knotty pine v-match

Ridge nailers

Gable insulation stops

Fly rafter material: (2) 2x8

Ladder rafter material: 2x8 filler at eaves

Roof strapping: 2x3 spruce 24” O.C.

Roof strapping screws

Exterior roof sheathing: 5/8” T&G AdvanTech®

Fascia: 1” pine boards

Soffits: 1” knotty pine v-match boards

Vents: Ridge and soffit

Shed roof porches: Made up of 1” knotty pine v-match boards and T&G AdvanTech®

Porch roof sheathing: 5/8” T&G AdvanTech®

Porch rafters: 4x8 spruce for shed roof porches as required

WINDOWS AND EXTERIOR DOORS

Windows: Andersen® 400 Series Low-E4 glass Tilt-Wash double-hung and Casement windows with full screens. Flexi frames.

Hinged and Gliding Patio Doors: Andersen 400 Se-ries Low-E4 Frenchwood® with screens, hardware and locksets

Exterior doors: Therma-Tru® Classic-Craft® CC48 fiberglass door system pre-hung and weather stripped with tempered glass

Pre-hung Premium 6 panel interior solid pine doors

Locksets for all interior and exterior swinging doors; hardware for all sliding closet doors and pocket doors

Exterior window and door trim: Random length pine specially milled 2x4 radius edges

Interior window trim: From 1” knotty pine v-match boards, if purchase of roof boards

Roof windows: Velux® VS Series with screens; pole with adaptor as required

MISCELLANEOUS MATERIALS PER PLAN

Basement stairs: 2x12 stringers and treads with 1” pine ris-ers and guard railings

Loft stairs: 2x12 stringers, SYP (Southern Yellow Pine) treads with 1” pine risers , guard railings as necessary

Interior railings: 4x4 posts, 2x4 rails, vertical slats from 1” knotty pine v-match boards

Exterior framed walls: partition frame, 1/2” AdvanTech®, log siding

Exterior railings: 2x2, 2x4 and 5/4x6 premium grade PTSYP supplied for porches, decks, and exterior balconies

House sill tie-downs from banding

Specially milled 4x6 and 6x6 splined post as required

Andersen® window products: optional HeatLock glazing

LOG SIDING GARAGE MATERIALS SPECIFICATIONS

Sills: 2x4 PTSYP

Wall framing: 24” O.C. with window and door headers as required

Wall sheathing: 7/16” OSB (Oriented Strand Board)

Siding: Milled shiplap log siding for walls and gables, East-ern White Pine, kiln dried

Roof framing: Pre-built truss rafters with ladder and fly rafter material and hardware. NOTE: We do not supply temporary or permanent bracing.

Roof sheathing: 5/8” T&G AdvanTech®

Fascia and soffit materials

Service door : Therma-Tru® Smooth Star® fiberglass door system

Windows: Andersen® 400 Series Low-E4 glass Tilt-Wash double-hung with screens

WWW.NORTHEASTERNLOG.COMWWW.NORTHEASTERNLOG.COMWWW.NORTHEASTERNLOG.COMWWW.NORTHEASTERNLOG.COM

Like us on facebook ©NLH 2018