4 case corrections in 2 planes+ demo of triad gel application
DESCRIPTION
The Guide Right Surgical Guide System is a system of components for the fabrication and correction of diagnostic and surgical dental implant guides in 1 or 2 dimensions.TRANSCRIPT
![Page 1: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/1.jpg)
Case Corrections in 2 Planes mesio▪distal & bucco▪lingual
ANAN 2.2013
Featuring
#18 ▪ #19
DIAGNOSTIC Guide SURGICAL Guide
![Page 2: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/2.jpg)
Fabrication of DIAGNOSTIC Guide
3 mm Guide Posts
3 mm Ceramic Guide Sleeves
Generation ll Bending Tool
![Page 3: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/3.jpg)
An impression was taken and a cast was made.
Two holes are drilled in the cast with a
3/32” drill.
Two 3 mm guide posts are placed in
the holes.
![Page 4: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/4.jpg)
The DIAGNOSTIC guide is ready to be securely seated in the patient for the cone
beam X-ray so that the long axis of the proposed osteotomies can be evaluated.
Triad® Gel was used to capture the
cleat on the ceramic guide sleeve
and adjacent teeth to fabricate the
DIAGNOSTIC guide.
Ceramic guide sleeves are placed on the
3 mm guide post.
![Page 5: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/5.jpg)
GALAXIS
Pre-op Software Evaluation
with DIAGNOSTIC Guide securely seated in patient
![Page 6: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/6.jpg)
A better position appears to be angled mesially from the
existing axis of the ceramic guide sleeve in the DIAGNOSTIC guide.
#18 panoramic view GALAXIS
![Page 7: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/7.jpg)
11° bend to the mesial
tangential view cross sectional view GALAXIS
B L
14° bend to the lingual
# 18
![Page 8: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/8.jpg)
11°
#18
FIRST BEND 11°.
The stylus is placed over the straight 3 mm guide post.
The set screw is tightened and the guide post is bent 11°
WHY to the LEFT? Easier to follow when bending to the mesial as in slide above.
![Page 9: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/9.jpg)
Guide post in bending tool block with 11° bend.
11°
#18
![Page 10: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/10.jpg)
With the stylus still on the guide post, the set screw is loosened
and the stylus on the guide post is rotated 90° back to the 0° mark.
This causes the stylus to raise up off the bending plate.
NOTE the shadows on both sides of the stylus
#18
PREPARATION for 2nd BEND
![Page 11: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/11.jpg)
stylus support bar
wing
screw
The sliding support bar is positioned beneath the stylus
to maintain the 11° angle of the 1st bend.
#18
![Page 12: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/12.jpg)
SECOND BEND
The wing screws are tightened to secure the stylus for the 2nd bend of 14°
toward the lingual (left) to avoid hitting the root of the distal tooth.
#18
14°
![Page 13: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/13.jpg)
A better position appears to be angled toward the mesial from the
existing axis of the ceramic guide sleeve in the DIAGNOSTIC guide.
#19 panoramic view GALAXIS
![Page 14: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/14.jpg)
9° bend to the mesial
tangential view cross sectional view GALAXIS
L B
# 19
15° bend to the lingual
![Page 15: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/15.jpg)
1st BEND 9°.
9°
#19
![Page 16: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/16.jpg)
With the stylus still on the guide sleeve it is rotated back to the 0° mark.
![Page 17: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/17.jpg)
The SECOND bend for #19 guide post is 15°.
![Page 18: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/18.jpg)
Review of Pre-op Corrections
# 18
ANGULAR CORRECTIONS
1st bend: 11° bend to the mesial
2nd bend: 14° bend to the lingual
Cosine is applied to determine correction data.
* see Pythagorean Theorem - COSINE CALCULATION slideshow
#19
ANGULAR CORRECTION
9° bend to the mesial
15° bend to the lingual
![Page 19: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/19.jpg)
Fabrication of SURGICAL Guide
4 mm Magnetic Guide Posts
4 mm Open Guide Sleeves
Adding Triad® Gel in Layers
![Page 20: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/20.jpg)
Wax added to buccal surface to stabilize position of 4 mm open guide sleeves
and guide posts prior to adding gel to the cleats on lingual surface.
![Page 21: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/21.jpg)
Occlusal view of 4 mm magnetic guide sleeves stabilized with red wax.
Then 4 mm open guide posts are removed.
![Page 22: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/22.jpg)
First layer of clear Triad® Gel added to adjacent tooth on lingual surface.
![Page 23: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/23.jpg)
Second layer of Triad® Gel extended to adjacent teeth in arch for
greater stability and cured to form the SURGICAL guide.
![Page 24: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/24.jpg)
Last layer of clear Triad® Gel added to capture
occlusal surface of teeth and cured
![Page 25: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/25.jpg)
Completed SURGICAL guide
ready for cold sterilization and placement.
![Page 26: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/26.jpg)
Guide Right™
Products shown in this case presentation
2 - 3 mm Stainless Guide Posts
2 - 3 mm Ceramic Guide Sleeves
2 - 4 mm Magnetic Guide Posts
2 - 4 mm Open Guide Sleeves
1 - 3/32” drill
Generation ll ▪ Bending Tool
Triad® Gel
Not shown but used: 2 mm pilot drill / 4mm stop shaft
NOTE: either stainless or ceramic guide sleeves could be used
1.800.314.0065 • www.deplaque.com
![Page 27: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/27.jpg)
Step 2 Locate 3/32” hole in the center of the v-cut and place the bottom half of the
guide post into the hole. Tighten the set screw.
Step 1 Place bending tool plate on a secure flat surface with the degree increments
at the top & the stainless steel bar with the v-cut at the bottom.
Step 3 Locate the hole in the bottom of the stylus that you will use that will fit over
the top half of the guide post (3.0 mm, 4.0 mm or 5.0 mm).
Step 5 Using the stylus as a lever, bend the guide post to the degree of angle of
correction. You may need to ease the point of the stylus beyond the
point of the desired degree.
Step 6 Loosen screw and remove guide post and the stylus to find the guide post
bent to the desired angle.
Step 4 Fit the stylus over the guide post securely with the point directed at
zero degrees and the bottom of the stylus in contact with the V block.
Guide Right™
GENERATION II ▪ GUIDE POST BENDING TOOL
SINGLE BEND review
![Page 28: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/28.jpg)
COMPOUND BEND overview
Step 1 Position a straight or offset guide post in the bending plate, tightening the set
screw against one of the flat surfaces on the lower half of the guide post.
Step 4 The 2nd bend in the second plane is made after rotating the guide post up away
from the surface of the bending plate to register the stylus point back at 0 degrees.
Step 5 Slide the stylus support bar down under the stylus until it supports the stylus.
Tighten the side screws before making the second bend.
Step 7 Remove the stylus and place the guide post back in the cast with the
appropriate side indicated by a mark facing the buccal or lingual surface.
Be sure the post is in the correct position.
If the post needs to be corrected by a linear movement an offset guide post can be used.
Off sets available in the 3 mm guide post: 0.5,1,1.5, 2.0 ,or 3.0 mm.
Step 3 The set screw is loosened and the guide post is rotated 90 ° next flat surface.
Step 2 The 1st bend can be made to the right or left direction.
Step 6 The second bend can be made in either direction according to the x-ray.
Guide Right™
GENERATION II ▪ GUIDE POST BENDING TOOL
![Page 29: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/29.jpg)
In-office or lab fabrication
Evaluate with 2D & 3D imaging
Allows linear and angular correction
Enables precision implant placement
Cost effective
A System of Components
for the fabrication and correction of DIAGNOSTIC & SURGICAL guides
in one or two dimensions
1.800.314.0065 • www.deplaque.com
![Page 30: 4 case corrections in 2 planes+ demo of triad gel application](https://reader033.vdocument.in/reader033/viewer/2022060110/55617910d8b42a72118b509a/html5/thumbnails/30.jpg)
Guide Right™ Surgical Guide System
Start With Precision. Place With Confidence.™
1.800.314.0065 • www.deplaque.com
fabricate ▪ evaluate ▪ correct ▪ verify ▪ place
DéPlaque