4 Drawer dresser (5522) - Assembly and Operation Manual

Congratulations on purchasing an MDB Family product. This product will provide many years of service if you adhere to the following guidelines for assembly, maintenance and operation. This product is for residential use only. Any institutional use is strictly prohibited.

Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assembling the product in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers. All of our products are made from natural woods. Please understand that natural woods have color variations which are the result of nature and not defects in workmanship.

DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARD-WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLIS-TIC VARIATIONS.

page 1revised 17OCT2012

(D)Back Panel x 2

(Q)Back Support Bar x 1

HARDWARE

Tools Needed(not included)

Phillipsscrewdriver

H8. Right Panel Glide (4) H10. Right Drawer Glide (4)

H11. Left Drawer Glide (4)H9. Left Panel Glide (4)

H2. Cam Lock Bolt (8) H3. Cam Lock (8) H4.Knob (8)

B. LeftEnd

Panel

H1. 1-1/8” MachineBolt (22)

H12. Leg WoodScrew (8)

H7. Large WoodScrew (16)

H6. Small Wood Screw (100)

H5. Knob Bolt (8)

H13. Support BarFastener (8)

A. RightEnd

Panel E. Dresser Top

J. Right Drawer Panel (4)

K. Left Drawer Panel (4)

M. Front Drawer Panel (4)

O. Back Drawer Panel (4)

D. Back Panel (2)N. Base Panel

C. DrawerBottom

Board (4)

P1. Leftleg (2)

P2. Rightleg (2)

G. Top Support Frame

F. Bottom Support Frame

PARTS

H. Support Bar (3)

Q. Back Support Bar

page 2

(Q)

(H)(Q)to the Ieft and right

Step 1: Installing the Rail Glides

Step 2: Assemble Dresser End Panels, Support Frames and Support Bars

Step 1:Installing the panel glides.

B. Left End PanelA. Right End Panel

Install the panel glides (H8) and (H9) onto the end panels (A) and (B). Use 3 wood screws (H6) for each glide.

DO NOT OVER TIGHTEN.

Step 2:Assemble dresser end panels, support frames and support bars.

Make sure top support frame (G) is placed with counter-sunk holes facing down.

Use screws (H6) and support bar fastener (H13) to mount support bars (H) and (Q) to the left and right end panels (A) and (B).

Place bottom frame support frame (F) with counter-sunk holes facing up.

DO NOT OVER TIGHTEN.

page 3

(H6)(H6)

(H6) (H6)

(H6)(H6)

(H6) (H6)

(H6)(H6)

Step 3:Assemble Dresser Top Step 4: Back Panel Assembly

Step 5: Assemble Base and Legs.Use 8 (H12) wood screws to install legs (P).

Step 3: Assemble dresser top.

Use 8 bolts (H1) to install the dresser top (E).

DO NOT OVER TIGHTEN.

Use 12 screws (H6) for back panel.

There are no pre-drilled holes on base panel for H12. Align carefully and secure legs. Then attach base panel assembly to the dresser assembly using 6 (H1) machine bolts as shown in the picture.

Drawer AssemblyStep 1

page 4

This item has a manufacturer’s limited one year warranty. Visit our web site at www.themdbfamily.com for more information.

Drawer AssemblyStep 2 Drawer Assembly

Step 3

Drawer AssemblyStep 4

Drawer AssemblyStep 5

Drawer AssemblyStep 6

Insert the assembled drawers.

page 5

!!! IMPORTANT !!! Furniture Anti-Tipping Kit InstallationChildren may be injured by tipping furniture and the use of the anti-tipping kit is highly recommended. This device, when properly installed, could provide protection against unexpected tipping of furniture due to improper use.

!!WARNING!! THIS DEVICE IS NOT A SUBSTITUTE FOR ADULT SUPERVISION.

Safety Notes:• Do not allow your children to climb or jump on the furniture or in the drawer. Climbing on the furniture could make it top-heavy and cause the furniture to damage or tip over.• Never move or push heavy furniture by yourself as it can cause the furniture to tip over.• This furniture is not intended to support TV or other heavy items.• Do not overload the drawers.

HARDWARE

ASSEMBLY INSTRUCTIONS

(not included)

Phillipsscrewdriver

Tools Needed

D. Plastic anchor

E. Strap

B. Longer screwA. Shorter screw

C. Washer (2)

1 23/16”

2”2.1 2.2

D

revised 280912

3 4

AC

E

CB

E

page 6