4. exposure scenario 4: use at industrial site ... · 4.2.1. control of environmental exposure:...
TRANSCRIPT
4. Exposure scenario 4: Use at industrial site - electroplating Sn-source:electroplating and galvanic; PC 14; Pc 15; PC 19; PC 21; SU 0:
EXPOSURE SCENARIO ADDENDUM
Short description of all exposure scenarios
Table . Overview of all exposure scenarios and contributing scenarios
Identifiers Market
Sector
Titles of exposure scenarios and the related contributing
scenarios
ES1 - M1 Manufacture - Manufacture of tin sulphate in the EU
- Manufacture of tin dichloride in the EU (ERC 1)
- Laboratory use, reasearch and development, quality
control (PROC 15)
- Synthesis in closed process (scc) (PROC 1)
- synthesisprocess in continous closed system (PROC 2)
- synthesis process in batch closed system (PROC 3)
- synthesis in opens systems (PROC 4)
- General Transfer operations including filling and/or
repacking, decicated (PROC 8b)
ES2 - F1 Formulation - Formulation of mixtures (liquid and solid)
- Formulation of solutions (ERC 2)
- Mixing process under strictly controled conditions (PROC
1)
EC Number: 231-302-2CAS Number: 7488-55-3Date of Generation/Revision: 13/05/2014 / Revision 8
ANODAL COLOR T LIQ.
Identifiers Market
Sector
Titles of exposure scenarios and the related contributing
scenarios
- mixing process in continous closed system (PROC 2)
- mixing process in batch closed system (PROC 3)
- Mixing in opens systems (PROC 4)
- GGeneral Transfer operations including filling and/or
repacking, decicated (PROC 8b)
- Laboratory use, reasearch and development, quality
control (PROC 15)
- Mixing operations in batch processes with multistage
contact (PROC 5)
- General Transfer operations including filling and/or
repacking, non-decicated (PROC 8a)
- Transfer operations, special filling system (PROC 9)
- Production of preparations* or articles by tabletting,
compression, extrusion, pelletisation (PROC 14)
ES3 - F2 PC 14;
PC 15;
PC 19;
PC 21
Formulation - Formulation of solutions
- Formulation of solutions (ERC 2)
- Mixing process under strictly controled conditions (PROC
1)
- mixing process in continous closed system (PROC 2)
- mixing process in batch closed system (PROC 3)
- Mixing in opens systems (PROC 4)
- GGeneral Transfer operations including filling and/or
repacking, decicated (PROC 8b)
- Laboratory use, reasearch and development, quality
control (PROC 15)
- Mixing operations in batch processes with multistage
Safety Data Sheet
ANODAL COLOR T LIQ.
Safety Data Sheet
ANODAL COLOR T LIQ.
Identifiers Market
Sector
Titles of exposure scenarios and the related contributing
scenarios
contact (PROC 5)
- General Transfer operations including filling and/or
repacking, non-decicated (PROC 8a)
ES4 - IW1 PC 14;
PC 15;
PC 19;
PC 21
Use at industrial site - electroplating Sn-source
- Electroplating Sn-Source (ERC 6a)
- Mixing process under strictly controled conditions (PROC
1)
- mixing process in continous closed system (PROC 2)
- mixing process in batch closed system (PROC 3)
- Mixing in opens systems (PROC 4)
- electroplating operation (PROC 13)
- Laboratory use, reasearch and development, quality
control (PROC 15)
- Mixing operations in batch processes with multistage
contact (PROC 5)
- General Transfer operations including filling and/or
repacking, non-decicated (PROC 8a)
- Transfer operations, special filling system (PROC 9)
- General Transfer operations including filling and/or
repacking, decicated (PROC 8b)
ES5 - IW2 PC 14;
PC 15;
PC 19;
PC 21
Use at industrial site - electroplating Sn-source
- Electroplating Sn-Source (ERC 5)
- Mixing process under strictly controled conditions (PROC
1)
- mixing process in continous closed system (PROC 2)
Safety Data Sheet
ANODAL COLOR T LIQ.
Identifiers Market
Sector
Titles of exposure scenarios and the related contributing
scenarios
- mixing process in batch closed system (PROC 3)
- Mixing in opens systems (PROC 4)
- electroplating operation (PROC 13)
- Laboratory use, reasearch and development, quality
control (PROC 15)
- Mixing operations in batch processes with multistage
contact (PROC 5)
- General Transfer operations including filling and/or
repacking, non-decicated (PROC 8a)
- Transfer operations, special filling systems (PROC 9)
- General Transfer operations including filling and/or
repacking, decicated (PROC 8b)
ES6 - IW3 PC 14;
PC 15;
PC 19;
PC 21
Use at industrial site - electroplating Sn-source
- Electroplating Sn-Source (ERC 4)
- Mixing process under strictly controled conditions (PROC
1)
- mixing process in continous closed system (PROC 2)
- mixing process in batch closed system (PROC 3)
- Mixing in opens systems (PROC 4)
- electroplating operation (PROC 13)
- Laboratory use, reasearch and development, quality
control (PROC 15)
ES7 - SL-PW1 PC 14;
PC 15;
PC 19;
PC 21
Service life (professional worker) - Service life (professional
worker)
- Service life (professional worker) (ERC 11a)
Safety Data Sheet
ANODAL COLOR T LIQ.
Identifiers Market
Sector
Titles of exposure scenarios and the related contributing
scenarios
ES8 - SL-C1 PC 14;
PC 15;
PC 19;
PC 21
Service life (consumers) - Service life (consumers)
- Service life (consumers) (ERC 11a)
ES9 - IW4 PC 1; PC
19; PC
21; PC
32; PC 0
Use at industrial site - reduction agent
- reduction agent (ERC 6a)
- Mixing process under strictly controled conditions (PROC
1)
- mixing process in continous closed system (PROC 2)
- mixing process in batch closed system (PROC 3)
- Mixing in opens systems (PROC 4)
- General Transfer operations including filling and/or
repacking, dedicated (PROC 8b)
- Laboratory use, reasearch and development, quality
control (PROC 15)
- Mixing operations in batch processes with multistage
contact (PROC 5)
- General Transfer operations including filling and/or
repacking, non-decicated (PROC 8a)
- Transfer operations, special filling system (PROC 9)
- Production of preparations* or articles by tabletting,
compression, extrusion, pelletisation (PROC 14)
- Manual cutting, cold rolling or assembly/disassembly of
material/article (PROC 21)
ES10 - IW5 PC 1; PC
19; PC
21; PC
32; PC 0
Use at industrial site - general catalyst use (incl. reactive
catalyst
- general catalyst use (incl. reactive catalyst (ERC 5)
Safety Data Sheet
ANODAL COLOR T LIQ.
Identifiers Market
Sector
Titles of exposure scenarios and the related contributing
scenarios
- Mixing process under strictly controled conditions (PROC
1)
- mixing process in continous closed system (PROC 2)
- mixing process in batch closed system (PROC 3)
- Mixing in opens systems (PROC 4)
- General Transfer operations including filling and/or
repacking, dedicated (PROC 8b)
- Laboratory use, reasearch and development, quality
control (PROC 15)
- Mixing operations in batch processes with multistage
contact (PROC 5)
- General Transfer operations including filling and/or
repacking, non-decicated (PROC 8a)
- Transfer operations, special filling system (PROC 9)
- Production of preparations* or articles by tabletting,
compression, extrusion, pelletisation (PROC 14)
- Manual cutting, cold rolling or assembly/disassembly of
material/article (PROC 21)
ES11 - IW6 PC 1; PC
19; PC
21; PC
32; PC 0
Use at industrial site - Sn Source in chemical industry /
intermediate use
- Sn Source in chemical industry / intermediate use (ERC
6d)
- Mixing process under strictly controled conditions (PROC
1)
- mixing process in continous closed system (PROC 2)
- mixing process in batch closed system (PROC 3)
- Mixing in opens systems (PROC 4)
Safety Data Sheet
ANODAL COLOR T LIQ.
Identifiers Market
Sector
Titles of exposure scenarios and the related contributing
scenarios
- General Transfer operations including filling and/or
repacking, dedicated (PROC 8b)
- Laboratory use, reasearch and development, quality
control (PROC 15)
- Mixing operations in batch processes with multistage
contact (PROC 5)
- General Transfer operations including filling and/or
repacking, non-decicated (PROC 8a)
- Transfer operations, special filling system (PROC 9)
- Production of preparations* or articles by tabletting,
compression, extrusion, pelletisation (PROC 14)
- Manual cutting, cold rolling or assembly/disassembly of
material/article (PROC 21)
ES12 - SL-PW2 PC 1; PC
19; PC
21; PC
32; PC 0
Service life (professional worker) - Service life (professional
worker)
- Service life (professional worker) (ERC 11a)
ES13 - SL-C2 PC 1; PC
19; PC
21; PC
32; PC 0
Service life (consumers) - Service life (consumers)
- Service life (consumers) (ERC 11a)
ES14 - F3 PC 9b;
PC 19;
PC 21;
PC 0
Formulation - Formulation of solutions
- Formulation of cement mixtures (reduction of Cr VI into
Cr III in later contact with humidity and or water (substance
reacts in the mixture) (ERC 2)
- Mixing process under strictly controled conditions (PROC
1)
- mixing process in continous closed system (PROC 2)
Safety Data Sheet
ANODAL COLOR T LIQ.
Identifiers Market
Sector
Titles of exposure scenarios and the related contributing
scenarios
- mixing process in batch closed system (PROC 3)
- Mixing in opens systems (PROC 4)
- General Transfer operations including filling and/or
repacking, dedicated (PROC 8b)
- Laboratory use, reasearch and development, quality
control (PROC 15)
- Mixing operations in batch processes with multistage
contact (PROC 5)
- General Transfer operations including filling and/or
repacking, non-decicated (PROC 8a)
ES15 - SL-PW3 PC 9b;
PC 19;
PC 21;
PC 0
Service life (professional worker) - Service life (professional
worker)
- Service life (professional worker) (ERC 11a)
- Stone, plaster, cement, glass and ceramic articles (PROC
21)
ES16 - SL-C3 PC 9b;
PC 19;
PC 21;
PC 0
Service life (consumers) - Service life (consumers)
- Service life (consumers) (ERC 11a)
- Stone, plaster, cement, glass and ceramic articles (AC 4)
STANNOUS SULPHATE 225 GR/L SCENARIO ESPOSITIVO 4 bozza 06 08 2014
Safety Data Sheet
ANODAL COLOR T LIQ.
4. Exposure scenario 4: Use at industrial site - electroplating Sn-source:electroplating and galvanic; PC 14; Pc 15; PC 19; PC 21; SU 0:
4.1. Title section
4.2. Condition of use affetcting exposure
4.3. Exposure estimation and reference to ist source
4.4. Guidance to DU to evaluate whether he works inside the boundaries set by theES
4.1. Title section
Metal surface treatment products, including galvanic and electroplating products (PC 14)
Non-metal-surface treatment products (CPC 15);
Intermediate (PC 19);
Laboratory Chemicals (PC 21);
Other (electroplating and galvanic) (SU 0)
Environment contributing scenario(s):
CS 1 Electroplating Sn-Source ERC 6a
Worker contributing scenario(s):
CS 2Mixing process under strictly controled conditions PROC 1
CS 3mixing process in continous closed system PROC 2
CS 4mixing process in batch closed system PROC 3
CS 5Mixing in opens systems PROC 4
Safety Data Sheet
ANODAL COLOR T LIQ.
CS 6 electroplating operation PROC 13
CS 7 Laboratory use, reasearch and development, quality control PROC 15
CS 8 Mixing operations in batch processes with multistage contact PROC 5
CS 9 General Transfer operations including filling and/or repacking,
non-decicated
PROC 8a
CS 10 Transfer operations, special filling system PROC 9
CS 11 General Transfer operations including filling and/or repacking, decicated PROC 8b
4.2. Condition of use affetcting exposure
4.2.1. Control of environmental exposure: Electroplating Sn-Source (ERC 6a)
Amount used, frequency and duration of use (or from service life)
• Daily use at site: <= 14.5 tonnes/day
• Annual use at a site: <= 290 tonnes/year
• Percentage of tonnage used at regional scale: = 100 %
Conditions and measures related to sewage treatment plant
• Municipal STP: Yes [Effectiveness Water: 43.95%]
• Discharge rate of STP: >= 2E3 m3/d
• Application of the STP sludge on agricultural soil: Yes
Conditions and measures related to treatment of waste (including article waste)
• Particular considerations on the waste treatment operations: No (low risk) (ERC based assessment
demonstrating control of risk with default conditions. Low risk assumed for waste life stage. Waste
disposal according to national/local legislation is sufficient.)
Safety Data Sheet
ANODAL COLOR T LIQ.
Other conditions affecting environmental exposure
• Receiving surface water flow rate: >= 1.8E4 m3/d
4.2.2 Control of worker exposure: Mixing process under strictly controled conditions (PROC 1)
Product (article) characteristics
• Dustiness of material: Low
• Concentration of substance in mixture: Substance as such
Amount used (or contained in articles), frequency and duration of use/exposure
• Duration of activity: < 8 hours
Technical and organisational conditions and measures
• General ventilation: Basic general ventilation (1-3 air changes per hour)
• Containment: Closed system (minimal contact during routine operations)
• Occupational Health and Safety Management System: Advanced
Conditions and measures related to personal protection, hygiene and health evaluation
• Dermal Protection: No [Effectiveness Dermal: 0%]
• Respiratory Protection: No [Effectiveness Inhal: 0%] ))))))))))))))))))))))))))))))))))))))))))))))))))
Other conditions affecting workers exposure
• Place of use: Indoor
• Process temperature (for solid): Ambient
4.2.3. Control of worker exposure: mixing process in continous closed system (PROC 2)
Product (article) characteristics
Safety Data Sheet
ANODAL COLOR T LIQ.
• Dustiness of material: Low
• Concentration of substance in mixture: Substance as suc
Amount used (or contained in articles), frequency and duration of use/exposure
• Duration of activity: < 8 hours
Technical and organisational conditions and measures
• General ventilation: Basic general ventilation (1-3 air changes per hour)
• Containment: Closed continuous process with occasional controlled exposure
• Local exhaust ventilation: yes [Effectiveness Inhal: 90%]
• Local exhaust ventilation (for dermal): yes [Effectiveness Dermal: 90%]
• Occupational Health and Safety Management System: Advanced
Conditions and measures related to personal protection, hygiene and health evaluation
• Dermal Protection: Yes (chemically resistant gloves conforming to EN374 with basic employee
training) [Effectiveness Dermal: 90%]
Other conditions affecting workers exposure
• Place of use: Indoor
• Process temperature (for solid): Ambient
4.2.4. Control of worker exposure: mixing process in batch closed system (PROC 3)
Product (article) characteristics
• Dustiness of material: Low
• Concentration of substance in mixture: Substance as such
Amount used (or contained in articles), frequency and duration of use/exposure
• Duration of activity: < 8 hours
Safety Data Sheet
ANODAL COLOR T LIQ.
Technical and organisational conditions and measures
• General ventilation: Basic general ventilation (1-3 air changes per hour)
• Containment: Closed batch process with occasional controlled exposure
• Occupational Health and Safety Management System: Advanced
Conditions and measures related to personal protection, hygiene and health evaluation
• Dermal Protection: Yes (chemically resistant gloves conforming to EN374 with basic employee
training) [Effectiveness Dermal: 90%]
Other conditions affecting workers exposure
• Place of use: Indoor
• Process temperature (for solid): Ambient
4.2.4. Control of worker exposure: Mixing in opens systems (PROC 4)
Product (article) characteristics
• Dustiness of material: Low
• Concentration of substance in mixture: Substance as such
Amount used (or contained in articles), frequency and duration of use/exposure
• Duration of activity: < 8 hours
Technical and organisational conditions and measures
• General ventilation: Basic general ventilation (1-3 air changes per hour)
• Containment: Semi-closed process with occasional controlled exposure
• Local exhaust ventilation: yes [Effectiveness Inhal: 90%]
• Occupational Health and Safety Management System: Advanced
Conditions and measures related to personal protection, hygiene and health evaluation
Safety Data Sheet
ANODAL COLOR T LIQ.
• Dermal Protection: Yes (chemically resistant gloves conforming to EN374 with basic employee
training) [Effectiveness Dermal: 90%]
Other conditions affecting workers exposure
• Place of use: Indoor
• Process temperature (for solid): Ambient
4.2.6. Control of worker exposure: electroplating operation (PROC 13)
Product (article) characteristics
• Dustiness of material: Low
• Concentration of substance in mixture: Substance as such
Amount used (or contained in articles), frequency and duration of use/exposure
• Duration of activity: < 4 hours
Technical and organisational conditions and measures
• General ventilation: Basic general ventilation (1-3 air changes per hour)
(((((((((((((((((((((((((((((• Containment: No TRA Worker
v3)))))))))))))))))))))))))))))
)))))))
• Local exhaust ventilation: yes [Effectiveness Inhal: 90%]
• Occupational Health and Safety Management System: Advanced
Conditions and measures related to personal protection, hygiene and health evaluation
• Dermal Protection: Yes (chemically resistant gloves conforming to EN374 with basic employee
training) [Effectiveness Dermal: 90%]
Other conditions affecting workers exposure
• Place of use: Indoor
Safety Data Sheet
ANODAL COLOR T LIQ.
• Process temperature (for solid): Ambient
4.2.7. Control of worker exposure: Laboratory use, reasearch and development, quality control(PROC 15)
Product (article) characteristics
• Dustiness of material: Low
• Concentration of substance in mixture: Substance as such
Amount used (or contained in articles), frequency and duration of use/exposure
• Duration of activity: < 8 hours
Technical and organisational conditions and measures
• General ventilation: Basic general ventilation (1-3 air changes per hour)
• Occupational Health and Safety Management System: Advanced
Conditions and measures related to personal protection, hygiene and health evaluation
• Dermal Protection: Yes (chemically resistant gloves conforming to EN374 with basic employee
training) [Effectiveness Dermal: 90%]
Other conditions affecting workers exposure
• Place of use: Indoor
• Process temperature (for solid): Ambient
4.2.8. Worker contributing scenario 7: Mixing operations in batch processes with multistagecontact (PROC 5)
Product (article) characteristics
• Dustiness of material: Low
Safety Data Sheet
ANODAL COLOR T LIQ.
• Concentration of substance in mixture: Substance as such
Amount used (or contained in articles), frequency and duration of use/exposure
• Duration of activity: < 4 hours
Technical and organisational conditions and measures
• General ventilation: Basic general ventilation (1-3 air changes per hour)
• Local exhaust ventilation: yes [Effectiveness Inhal: 90%]
• Occupational Health and Safety Management System: Advanced
Conditions and measures related to personal protection, hygiene and health evaluation
• Dermal Protection: Yes (chemically resistant gloves conforming to EN374 with basic employee
training) [Effectiveness Dermal: 90%]
Other conditions affecting workers exposure
• Place of use: Indoor
• Process temperature (for solid): Ambient
4.2.9. Control of worker exposure: General Transfer operations including filling and/orrepacking, non-decicated (PROC 8a)
Product (article) characteristics
• Dustiness of material: Low
• Concentration of substance in mixture: Substance as such
Amount used (or contained in articles), frequency and duration of use/exposure
• Duration of activity: < 4 hours
Technical and organisational conditions and measures
Safety Data Sheet
ANODAL COLOR T LIQ.
• General ventilation: Basic general ventilation (1-3 air changes per hour)
• Local exhaust ventilation: yes [Effectiveness Inhal: 90%]
• Occupational Health and Safety Management System: Advanced
Conditions and measures related to personal protection, hygiene and health evaluation
• Dermal Protection: Yes (chemically resistant gloves conforming to EN374 with basic employee
training) [Effectiveness Dermal: 90%]
Other conditions affecting workers exposure
• Place of use: Indoor
• Process temperature (for solid): Ambient
4.2.10. Control of worker exposure: Transfer operations, special filling system (PROC 9)
Product (article) characteristics
• Dustiness of material: Low
• Concentration of substance in mixture: Substance as such
Amount used (or contained in articles), frequency and duration of use/exposure
• Duration of activity: < 8 hours
Technical and organisational conditions and measures
• General ventilation: Basic general ventilation (1-3 air changes per hour)
• Containment: Semi-closed process with occasional controlled exposure
• Local exhaust ventilation: yes [Effectiveness Inhal: 90%]
• Occupational Health and Safety Management System: Advanced
Conditions and measures related to personal protection, hygiene and health evaluation
Safety Data Sheet
ANODAL COLOR T LIQ.
• Dermal Protection: Yes (chemically resistant gloves conforming to EN374 with basic employee
training) [Effectiveness Dermal: 90%]
Other conditions affecting workers exposure
• Place of use: Indoor
• Process temperature (for solid): Ambient
4.2.11. Control of worker exposure: General Transfer operations including filling and/orrepacking, decicated (PROC 8b)
Product (article) characteristics
• Dustiness of material: Low
• Concentration of substance in mixture: Substance as such
Amount used (or contained in articles), frequency and duration of use/exposure
• Duration of activity: < 8 hours
Technical and organisational conditions and measures
• General ventilation: Basic general ventilation (1-3 air changes per hour)
• Containment: Semi-closed process with occasional controlled exposure
• Local exhaust ventilation: yes [Effectiveness Inhal: 95%]
• Occupational Health and Safety Management System: Advanced
Conditions and measures related to personal protection, hygiene and health evaluation
• Dermal Protection: Yes (chemically resistant gloves conforming to EN374 with basic employee
training) [Effectiveness Dermal: 90%]
• Respiratory Protection: No [Effectiveness Inhal: 0%]
Other conditions affecting workers exposure
• Place of use: Indoor
Safety Data Sheet
ANODAL COLOR T LIQ.
• Process temperature (for solid): Ambient
4.3. Exposure estimation and reference to ist source
4.3.1. Environmental release and exposure: Electroplating Sn-Source (ERC 6a)
Release
route
Release rate Release estimation
method
Water 0.014 Kg/day Release factor
Air 0.145 Kg/day Release factor
Soil o.145 Kg/day Release factor
Protection target Exposure estimate (based on EUSES
2.1.2)
Risk characterisation
Freshwater Local PEC: 4.064E-4 mg/L RCR = 0.136
Sediment (freshwater) Local PEC: 0.004 mg/kg dw RCR < 0.01
Marine water Local PEC: 4.064E-5 mg/L RCR < 0.01
Sediment (marine water) Local PEC: 3.727E-4 mg/kg dw RCR < 0.01
Sewage treatment plant Local PEC: 0.004 mg/L RCR < 0.01
Agricultural soil Local PEC: 0.003 mg/kg dw RCR = 0.037
Man via Environment -
Inhalation
Qualitative risk
characterisation (see below)
Man via Environment - Oral Exposure via food consumption:
4.49E-4 mg/kg bw/day
RCR = 0.073
Safety Data Sheet
ANODAL COLOR T LIQ.
Protection target Exposure estimate (based on EUSES
2.1.2)
Risk characterisation
Man via environment -
combined routes
RCR = 0.073
4.3.2 Worker exposure: Mixing process under strictly controled conditions (PROC 1)
Route of exposure and type
of effects
Exposure estimate Risk characterisation
Inhalation, systemic,
long-term
0.01 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, systemic, acute 0.04 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, local, long-term 0.01 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, local, acute 0.04 mg/m³ (TRA Worker v3) RCR < 0.01
Dermal, systemic, long-term 0.034 mg/kg bw/day (TRA Worker v3) RCR = 0.309
Dermal, local, long-term 0.01 mg/cm² (TRA Worker v3) RCR < 0.01
Combined routes, systemic,
long-term
RCR = 0.31
Combined routes, systemic,
acute
RCR < 0.01
4.3.3. Worker exposure: mixing process in continous closed system (PROC 2)
Route of exposure and type
of effects
Exposure estimate Risk characterisation
Inhalation, systemic,
long-term
0.001 mg/m³ (TRA Worker v3) RCR < 0.01
Safety Data Sheet
ANODAL COLOR T LIQ.
Route of exposure and type
of effects
Exposure estimate Risk characterisation
Inhalation, systemic, acute 0.004 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, local, long-term 0.001 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, local, acute 0.004 mg/m³ (TRA Worker v3) RCR < 0.01
Dermal, systemic, long-term 0.014 mg/kg bw/day (TRA Worker v3) RCR = 0.124
Dermal, local, long-term 0.002 mg/cm² (TRA Worker v3) RCR < 0.01
Combined routes, systemic,
long-term
RCR = 0.125
Combined routes, systemic,
acute
RCR < 0.01
4.3.4. Worker exposure: mixing process in batch closed system (PROC 3)
Route of exposure and type
of effects
Exposure estimante Risk characterisation
Inhalation, systemic,
long-term
0.1 mg/m³ (TRA Worker v3) RCR = 0.012
Inhalation, systemic, acute 0.4 mg/m³ (TRA Worker v3) RCR = 0.05
Inhalation, local, long-term 0.1 mg/m³ (TRA Worker v3) RCR = 0.012
Inhalation, local, acute 0.4 mg/m³ (TRA Worker v3) RCR = 0.05
Dermal, systemic, long-term 0.069 mg/kg bw/day (TRA Worker v3) RCR = 0.627
Dermal, local, long-term 0.02 mg/cm² (TRA Worker v3) RCR < 0.01
Combined routes, systemic,
long-term
RCR = 0.64
Safety Data Sheet
ANODAL COLOR T LIQ.
Route of exposure and type
of effects
Exposure estimante Risk characterisation
Combined routes, systemic,
acute
RCR = 0.05
4.3.5. Worker exposure: Mixing in opens systems (PROC 4)
Route of exposure and type
of effects
Exposure estimate Risk characterisation
Inhalation, systemic,
long-term
0.05 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, systemic, acute 0.2 mg/m³ (TRA Worker v3) RCR = 0.025
Inhalation, local, long-term 0.05 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, local, acute 0.2 mg/m³ (TRA Worker v3) RCR = 0.025
Dermal, systemic, long-term 0.069 mg/kg bw/day (TRA Worker v3) RCR = 0.624
Dermal, local, long-term 0.01 mg/cm² (TRA Worker v3) RCR < 0.01
Combined routes, systemic,
long-term
RCR = 0.63
Combined routes, systemic,
acute
RCR = 0.025
4.3.6. Worker exposure: electroplating operation (PROC 13)
Route of exposure and type
of effects
Exposure estimate Risk characterisation
Inhalation, systemic,
long-term
0.006 mg/m³ (TRA Worker v3) RCR < 0.01
Safety Data Sheet
ANODAL COLOR T LIQ.
Route of exposure and type
of effects
Exposure estimate Risk characterisation
Inhalation, systemic, acute 0.04 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, local, long-term 0.006 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, local, acute 0.04 mg/m³ (TRA Worker v3) RCR < 0.01
Dermal, systemic, long-term 0.082 mg/kg bw/day (TRA Worker v3) RCR = 0.748
Dermal, local, long-term 0.012 mg/cm² (TRA Worker v3) RCR < 0.01
Combined routes, systemic,
long-term
RCR = 0.749
Combined routes, systemic,
acute
RCR < 0.01
4.3.7. Worker exposure: Laboratory use, reasearch and development, quality control (PROC 15)
Route of exposure and type
of effects
Exposure estimate Risk characterisation
Inhalation, systemic,
long-term
0.1 mg/m³ (TRA Worker v3) RCR = 0.012
Inhalation, systemic, acute 0.4 mg/m³ (TRA Worker v3) RCR = 0.05
Inhalation, local, long-term 0.1 mg/m³ (TRA Worker v3) RCR = 0.012
Inhalation, local, acute 0.4 mg/m³ (TRA Worker v3) RCR = 0.05
Dermal, systemic, long-term 0.034 mg/kg bw/day (TRA Worker v3) RCR = 0.309
Dermal, local, long-term 0.01 mg/cm² (TRA Worker v3) RCR < 0.01
Combined routes, systemic,
long-term
RCR = 0.322
Safety Data Sheet
ANODAL COLOR T LIQ.
Route of exposure and type
of effects
Exposure estimate Risk characterisation
Combined routes, systemic,
acute
RCR = 0.05
4.3.8. Worker exposure: Mixing operations in batch processes with multistage contact (PROC 5)
Route of exposure and type
of effects
Exposure estimate Risk characterisation
Inhalation, systemic,
long-term
0.03 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, systemic, acute 0.2 mg/m³ (TRA Worker v3) RCR = 0.025
Inhalation, local, long-term 0.03 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, local, acute 0.2 mg/m³ (TRA Worker v3) RCR = 0.025
Dermal, systemic, long-term 0.082 mg/kg bw/day (TRA Worker v3) RCR = 0.748
Dermal, local, long-term 0.012 mg/cm² (TRA Worker v3) RCR < 0.01
Combined routes, systemic,
long-term
RCR = 0.752
Combined routes, systemic,
acute
RCR = 0.025
4.3.9. Worker exposure: General Transfer operations including filling and/or repacking,non-decicated (PROC 8a)
Route of exposure and type
of effects
Exposure estimate Risk characterisation
Inhalation, systemic, 0.03 mg/m³ (TRA Worker v3) RCR < 0.01
Safety Data Sheet
ANODAL COLOR T LIQ.
Route of exposure and type
of effects
Exposure estimate Risk characterisation
long-term
Inhalation, systemic, acute 0.2 mg/m³ (TRA Worker v3) RCR = 0.025
Inhalation, local, long-term 0.03 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, local, acute 0.2 mg/m³ (TRA Worker v3) RCR = 0.025
Dermal, systemic, long-term 0.082 mg/kg bw/day (TRA Worker v3) RCR = 0.748
Dermal, local, long-term 0.006 mg/cm² (TRA Worker v3) RCR < 0.01
Combined routes, systemic,
long-term
RCR = 0.752
Combined routes, systemic,
acute
RCR = 0.025
4.3.10. Worker exposure: Transfer operations, special filling system (PROC 9)
Route of exposure and type
of effects
Exposure estimate Risk characterisation
Inhalation, systemic,
long-term
0.01 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, systemic, acute 0.04 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, local, long-term 0.01 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, local, acute 0.04 mg/m³ (TRA Worker v3) RCR < 0.01
Dermal, systemic, long-term 0.069 mg/kg bw/day (TRA Worker v3) RCR = 0.624
Dermal, local, long-term 0.01 mg/cm² (TRA Worker v3) RCR < 0.01
Safety Data Sheet
ANODAL COLOR T LIQ.
Route of exposure and type
of effects
Exposure estimate Risk characterisation
Combined routes, systemic,
long-term
RCR = 0.625
Combined routes, systemic,
acute
RCR < 0.01
4.3.11. Worker exposure: General Transfer operations including filling and/or repacking,decicated (PROC 8b)
Route of exposure and type
of effects
Exposure estimate Risk characterisation
Inhalation, systemic,
long-term
0.005 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, systemic, acute 0.02 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, local, long-term 0.005 mg/m³ (TRA Worker v3) RCR < 0.01
Inhalation, local, acute 0.02 mg/m³ (TRA Worker v3) RCR < 0.01
Dermal, systemic, long-term 0.069 mg/kg bw/day (TRA Worker v3) RCR = 0.623
Dermal, local, long-term 0.005 mg/cm² (TRA Worker v3) RCR < 0.01
Combined routes, systemic,
long-term
RCR = 0.624
Combined routes, systemic,
acute
RCR < 0.01
Safety Data Sheet
ANODAL COLOR T LIQ.
4.4. Guidance to DU to evaluate whether he works inside the boundaries set by theES
The downstream user (DU) works inside the boundaries set by the ES if either the proposed risk
management measures as described above are met or the DU can demonstrate on his own that his
operational conditions and implemented risk management measures are adequate. This has to be
done by showing that they limit the inhalation and dermal exposure to a level below the respective
DNEL (given that the processes and activities in question are covered by the PROCs listed above) as
given below. If measured data are not available, the DU may make use of an appropriate scaling tool
such as ECETOC to estimate the associated exposure