4012 kelly tillage system
TRANSCRIPT
4012 Kelly Tillage System
Kelly EngineeringPO Box 100
Booleroo Centre SA 5482
www.kellytillage.com
To find your local dealer contact Kelly Engineering at [email protected]
Kelly Model 4012 SpecificationsDimensionsTransport Length 14.6 m (47.9 ft)
Transport Width 3m (9.8 ft)
Transport Height 4m (13.1 ft)
Maxiumum width (unfolded)
12.9 m (42.4f t)
Cut Width 11.9 m (39 ft)
WeightTotal Weight (without discs )
5800 kg (12787 lbs)
Total Axle Load 10500 kg (23148 lbs)
Average Perfomanceat 10km/hr 9.52 ha/hr
at 15km/hr 14.28 ha/hr
Operating InformationSpeed 10-15 km/hr
Fuel Consumption* approximately 2.5-4 l/ha
*(Fuel Consumption - typical for 10-15km/hr)*(Fuel Consumption - average conditions)
AxleMain Axle Monroc 908XFR track 2570 mm
(hydraulic/pneumatic brake options)
Wing Stubs Monroc 808X
Jockey Wheel Monroc 606XR
TyresMain and Wing 400/55-22.5 BKT
Floatation
Jockey Wheel 10.0/75-15.3 BKT 702
List of features on the 4012Kelly Tillage System
• New Drawbar for easier and tighter turning
• Extensive use of high strength steel for lower frame weight
• Full range of Kelly ground tools provides versatile shallow tillage
capabilities
• Front wing cylinders moved inboard for
better protection from damage
• New distinctive livery and decals
• New pull is designed for high horsepower
• Advanced aluminium hydraulic hose grips, colour coded and user friendly
• Wing float provides contour
following for best perfomance in
undulating terrain
• Improved centre chain overlap,
reducing ridging and furrowing
Greasable forged pivots
Increased centre chain overlap
New pull for high horsepower
• Greasable forged pivots on all joints for improved strength and reduced wear
• Multiple hitch options using ISO mounting plates including Cat 3 & 4 two point hitches
• Same wheels on centreframe and wings (400/55-22.5), allowing for interchangeability
• Fully sealed bearing enclosure on the jockey wheel for lower maintenance
Versatile shallow tillage capabilities
Tapered Chain End positions are circled in red
Tapered Chain Ends through the centre of the machine for optimised cut width