4211 hallacy dr. • holland, mi 49424 • ph 616.786.9200...
TRANSCRIPT
-
4211
Hal
lacy
Dr.
• H
oll
and
, MI 4
9424
• p
h 6
16.7
86.9
200
• f
x 61
6.78
6.93
90
www.autotek-systems.com
i2mfg +
Autotek Systems LLC, A Division of Agritek Industries, Inc.
AT Autotek
-
Both the Autotek nut feeding system and the Autotek stud feeding system were created on one premise. That premise was “simple innovation”. Both systems were designed under one concept; to contain the part and deliver it to the work piece. The patented dual action cylinder is what makes all of this possible.
integration program
The i2 program is designed to
integrate the patented gripper cyinder to the custom
ers existing system
. The program can w
ork on m
any levels from a sim
ple integration of our cylinder to your system
. Or it can go as far as to
replace everything but the bowl.
next door manufacturing
The single largest complaint w
e have heard, is that the custom
er can’t get service or spare parts in a tim
ely m
anner. Manufacturing plus is our
response. With locations already in
Grand Rapids, and D
etroit Michigan,
Autotek has added two m
ore locations. O
ne in Burlington Ontario, and one in
Tennessee. Regardless of where the
systems are m
anufactured, they will
still look and function the same.
i2mfg
+
the “gripper” cylinderThe patented “Gripper” cylinder is a double action cylinder. The first action brings the nut to the weld piece. The second strips the nut onto the weld piece. What makes this cylinder unique is the use of a spring loaded “Gripper”. The “Gripper” physically holds on to the inside of the nut, and carries it down to the weld piece. It was designed to work in an environment, where magnetism or vaccuum is less than ideal.
the “stud” cylinderThe stud cylinder works very much the same as the “Gripper” cylinder. It is also a double action cylinder. The first action brings the stud to the weld piece. The second brings a “hammer” forward, which pushes the stud out of the “jaws”, and into the welding position.
gc
Sc
nfsnut feeding system