44ccp closed circuit cone plant - invercas · 44ccp closed circuit cone plant telsmith has long...
TRANSCRIPT
44CCP CLOSED CIRCUIT CONE PLANT
Telsmith has long been known for high quality,
technology-driven products that yield consistent
performance. Our revolutionary 44CCP closed circuit
plant builds further on that reputation. It is the first
high production, closed circuit design that expands
the use of hydraulic systems to create rapid mobility
and superior maintenance access, no disassembly
required.
This achievement is accomplished with the use of
two unique hydraulically powered systems. First,
hydraulically folding the plant feed conveyor reduces
travel height and allows vertical access into the cone
crusher. With the conveyor out of the way, replacing
cone liners is much easier. Second, Telsmith has
combined the fines conveyor and triple deck screen
into one common module that lowers into the chassis
for travel. These two hydraulic systems combine to
yield a travel height of 13 ft. 6 in. and yet unfold into
an operating mode in under five minutes.
The production heart of this revolutionary plant is the
300 HP, model 44SBS cone crusher. Built rugged
and equipped with digital CSS display and “adjust
under load” capabilities, the 44SBS is reliable, easy to
operate and provides consistent top performance in
varying conditions.
The 44CCP closed circuit plant is unique in the
aggregate industry combining mobility, unequaled
maintenance access and consistent performance
— an outstanding value for portable plant owners.www.telsmith.com
65780_04-TEL-004_Fnl.indd 1 03/08/2005 2:02:19 PM
simple maintenanceUninhibited access to cone liner changes.
Operating mode
Maintenance and travel mode
Telsmith’s hydraulic systems fold the feed conveyor and lower
the screen module for maintenance access like never before.
In less than 5 minutes your maintenance crew has uninhibited
access to the cone for necessary maintenance.
Equipped with a digital CSS display, adjusting the 44SBS is simple. Push-button controls for adjustment, clearing and even “high speed” rotate mode make operations and maintenance quick and easy.
features
The screen feed conveyor is offset to one side, allowing extra room to change wire cloth.
Screen motor slides in and out for travel with ratcheting jack.Fines conveyor tail section is easily accessed for maintenance.
Run-on hydraulic leveling system makes for quick and simple setup.
Telsmith’s exclusive blending gate arrangement offers flexibility in producing quality products.
Hydraulics lower the screen module into the chasis for travel.
65780_04-TEL-004_Fnl.indd 2 03/07/2005 6:33:54 AM
The rugged model 44SBS is powered by a 300 Hp electric motor for optimum production. Adjust under load capability and the patented hyd. anti-spin system allows consistent production performance.
Equipped with a digital CSS display, adjusting the 44SBS is simple. Push-button controls for adjustment, clearing and even “high speed” rotate mode make operations and maintenance quick and easy.
By rotating the crusher V-belt drive to the side of the plant, Telsmith makes room for a discharge conveyor with no vertical curve, simplifying conveyor operation and maintenance.
Productiv
ity w
here yo
u n
eed it
Screen motor slides in and out for travel with ratcheting jack.Fines conveyor tail section is easily accessed for maintenance.
Telsmith’s exclusive blending gate arrangement offers flexibility in producing quality products.
Hydraulic controls level the plant, raise the screen and unfold the conveyor for operation in just minutes.
The conveyor folds to allow uninhibited access to the cone crusher for maintenance.
65780_04-TEL-004_Fnl.indd 3 03/07/2005 6:34:13 AM
P.O. Box 539 Mequon, WI 53092-0539
Phone: 800-765-6601 262-242-6600
Fax: 262-242-5812
Standard Plant Specifications:
• Heavy duty quad axle chassis with equalized air ride suspension
• 44SBS cone crusher with Dynamic Adjust and 300 HP motor
• 6’ X 20’ three deck horizontal screen with triple shaft drive
• Plant conveyors:
o 36” x 34’ folding plant feed conveyor with motorized head pulley drive, backstop and belt scraper
o 36” X 23’ screen feed conveyor with motorized head pulley drive and belt scraper
o 36” X 31’ closed circuit conveyor with motorized head pulley drive, backstop and belt scraper
o 48” X 16’ fines conveyor with motorized head pulley drive and belt scraper
• Optional: 44SBS anti-spin system
• Optional: 6 point “run-on” hydraulic leveling system
• Optional: plant controls mounted on independent support stand that travels “on plant” and lifts off for operation
Model
44 SBS
Closed Circuit Crusher Throughput Capacity:
3/8” 1/2” 5/8” 3/4” 1” 1-1/4” 10 mm 13 mm 16 mm 19 mm 25 mm 32 mm
stph 150 - 195 170 - 220 200 - 260 220 - 285 270 - 350 305 - 390
mtph 135 - 176 153 - 198 180 - 234 198 - 257 243 - 315 275 - 351
• See SBS crusher brochure for chamber selection notes
• Capacities are approximate total throughput based on average material bulk density of 100 lbs./ft3
• Throughput capacity will vary depending on the type of material, feed gradation, moisture content, chamber selection,
feed method and other site specific operating conditions
© 2005 Telsmith, Inc. Telsmith 44CCP 03/05
On-Plant Electrical Requirements:
44SBS 300 HP
Oil lube motor 10 HP
2 ea. immersion heaters 3 Kw ea.
Hydraulic system motor 10 HP
Air – Oil cooler 5 HP
Triple deck screen 6’ x 20’ 40 HP
36” X 34’ conveyor 15 HP
36” X 23’ conveyor 7.5 HP
36” X 31’ conveyor 15 HP
48” X 16’ conveyor 7.5 HP
Travel Weights Fully Assembled:
King pin 55,000 lbs.
Axles 69,000 lbs.
Total weight 124,000 lbs.
Dimensions are in the travel mode
62’ - 91/2”
11’-10”
13’ - 6”
10’-1/2”16’ - 51/2”9’-4” 19’ - 3” 5’-2”2’-61/2”
65780_04-TEL-004_Fnl.indd 4 03/07/2005 6:34:15 AM