474673
TRANSCRIPT
-
7/23/2019 474673
1/6
DRAFT NORM
EN 16582-3
Edition: 2013-06-01
Domestic swimming pools
Part 3: Specific requirements including safety and testmethods for aboveground pools
Schwimmbder fr private Nutzung Teil 3: Spezielle BesondereAnforderungen einschlielich sicherheitstechnischer Anforderungen und
Prfverfahren fr auf dem Boden aufgestellte Schwimmbder
Piscines prives usage familial Partie 3: Exigences spcifiques, exigencesde scurit et mthodes d'essai pour piscines hors sol
ICS 97.220.10
Identical (IDT) with prEN 16582-3:2013-04
responsible Committee 245Spa engineering
Publisher and printingAustrian Standards Institute/sterreichisches Normungsinstitut (ON)Heinestrae 38, 1020 Wien
Copyright Austrian Standards Institute 2013.All rights reserved. No part of this publication may bereproduced or utilized in any form or by any means electronic, mechanical and photocopying or any otherdata carrier without prior permission!E-Mail: [email protected]: www.as-plus.at/nutzungsrechte
Sale and distribution of national and foreign
standards and technical regulations viaAustrian Standards plus GmbHHeinestrae 38, 1020 WienE-Mail: [email protected]: www.as-plus.atWebshop: www.as-plus.at/shopTel.: +43 1 213 00-444Fax: +43 1 213 00-818
Note:Because of possible comments, the final version of this NORM candiffer from the present Draft.
Please send your comments (in writing) by 2013-07-15to AustrianStandards Institute.
AS+
Shop
04.09.2015
-
7/23/2019 474673
2/6
DRAFT NORM EN 16582-3:2013
2
Explanations concerning Draft
The present Draft European Standard EN 16582-3has been submitted to CEN members for voting. In case ofa positive result of the voting as required by CEN/CENELEC regulations, this Draft will be published as EN.
Like all member organizations of CEN, Austrian Standards Institute is basically obliged to implement Europe-an Standards in Austria and to withdraw conflicting standards.
Austrian Standards Institute herewith submits this Draft of a European Standard as Draft NORM topublic enquiry and information.
Comments on this Draft
Please find below some practical instructions intended to offer you and the responsible committee assistancefor the processing of comments and proposals for modification:
Form For your comments/proposals for change, please use the relevant formavailable from Internet. Download underhttp://www.as-institute.at/en/standards/developing-standards/offer-solutions/comments/or use the Draft Standard Portalhttp://www.as-institute.at/en/standards/draft-standard-portal/
Structure Please use a new line for each comment. This facilitates the attributionof the comments received to the different clauses and chapters of the re-spective Draft.
Language Please formulate technicalcomments on European Standards if possi-
ble inEnglish, since English is the common working language ofthe most European standardizing bodies.Editorial and/or linguistic proposals for change/improvement of Ger-man versionsof European Standards shall (certainly) be submitted inGerman.
Script/Format Please use the script Arialwith 9 pt font size.Please do not changethe formats.
Dispatch Please send your comments by E-Mail to the responsible CommitteeManager ([email protected])
Aspects concerning patent law The recipients of this Draft NORM are requested to add information on
any patent rights known to their comments and to provide supportingdocumentation, if available.
AS+
Shop
04.09.2015
-
7/23/2019 474673
3/6
EUROPEAN STANDARD
NORME EUROPENNE
EUROPISCHE NORM
DRAFT
prEN 16582-3
April 2013
ICS 97.220.10
English Version
Domestic swimming pools - Part 3: Specific requirementsincluding safety and test methods for aboveground pools
Piscines prives usage familial - Partie 3: Exigencesspcifiques, exigences de scurit et mthodes d'essai
pour piscines hors sol
Schwimmbder fr private Nutzung - Teil 3: SpezielleBesondere Anforderungen einschlielich
sicherheitstechnischer Anforderungen und Prfverfahrenfr auf dem Boden aufgestellte Schwimmbder
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 402.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations whichstipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other languagemade by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC ManagementCentre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and UnitedKingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and toprovide supporting documentation.
Warning: This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice andshall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COM IT E UROP E N DE NORM AL ISAT ION
EUROPISCHES KOMITEE FR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
2013 CEN All rights of exploitation in any form and by any means reservedworldwide for CEN national Members.
Ref. No. prEN 16582-3:2013: EAS+
Shop
04.09.2015
-
7/23/2019 474673
4/6
prEN 16582-3:2013 (E)
2
Contents Page
Foreword ..............................................................................................................................................................3
1 Scope ......................................................................................................................................................4
2 Normative references ............................................................................................................................4
3 Terms and definitions ...........................................................................................................................4
4 Requirements and test methods specific to above-ground swimming pool ..................................74.1 Above-ground swimming pool with frame-supporting walls ............................................................7
4.1.1 Resistance to horizontal deformation .................................................................................................74.1.2 Resistance to vertical deformation ......................................................................................................84.1.3 Bursting strength ...................................................................................................................................8
4.2 Aboveground swimming pool with self-stabilising walls ............................................................... 10
4.2.1 Capacity to stop an overflow ............................................................................................................. 104.2.2 Inflatable compartment ...................................................................................................................... 104.2.3 Stability in the event of deflation of the upper tube ........................................................................ 10
4.2.4 Bursting strength ................................................................................................................................ 114.3 Mechanical strength of the membrane of a swimming pool with tubular frame and/or
flexible structure ................................................................................................................................. 114.4 Specific requirements for secured access points to the pool ....................................................... 12
4.4.1 General ................................................................................................................................................. 124.4.2 Ladders with lifting access ................................................................................................................ 124.4.3 Ladders with retractable access ....................................................................................................... 12
4.4.4 Means of access to the deck (ladder or stairs) ................................................................................ 134.5 Other requirements............................................................................................................................. 13
Bibliography ..................................................................................................................................................... 14
NORM DRAFT
AS+
Shop
04.09.2015
-
7/23/2019 474673
5/6
prEN 16582-3:2013 (E)
3
Foreword
This document (prEN 16582-3:2013) has been prepared by Technical Committee CEN/TC 402 Domesticpools and spas, the secretariat of which is held by AFNOR.
This document is currently submitted to the CEN Enquiry.
This document is part of a series of standards dealing with domestic swimming pools which consist of:
Part 1: general requirements including safety and test methods;
Part 2: specific requirements including safety and test methods for inground pools;
Part 3: specific requirements including safety and test methods for aboveground pools.
NORM DRAFT
AS+
Shop
04.09.2015
-
7/23/2019 474673
6/6
prEN 16582-3:2013 (E)
4
1 Scope
This part of EN 16582-3 specifies the specific safety and quality requirements and test methods for domesticaboveground swimming pools in addition to the general requirements of EN 16582-1 and shall be read in
conjunction with it. The requirements of this specific standard take priority over those in EN 16582-1.
These requirements and test methods are applicable to aboveground pool structure, including their means ofaccess.
This document applies to pools with a minimum water depth more than 400 mm.
This standard does not apply to:
pools of public use covered by EN 15288-1;
paddling pools according to EN 71-8;
domestic spas.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and areindispensable for its application. For dated references, only the edition cited applies. For undated references,the latest edition of the referenced document (including any amendments) applies.
EN 14843, Precast concrete products Stairs.
EN 1875-3, Rubber- or plastics-coated fabrics Determination of tear strength Part 3: Trapezoidal
method.
EN ISO 4674-2, Rubber- or plastics-coated fabrics Determination of tear resistance Part 2: Ballisticpendulum method. (ISO 4674-2)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 16582-1 and the following apply.
3.1frame
all of the resistant parts that support and/or reinforce the wall in view of forming the peripheral structure (seeFigure 1)
3.2wallseparating surface forming the walls of a closed enclosure with a more or less vertical appearance anddelimiting the pool
3.3frame-supported wallwall whose stability is ensured solely by the constitutive elements supplied and which does not requireadditional reinforcement for its resistance to internal pressure (see Figure 1)
Note 1 to entry: Foundation or ground-anchoring elements are not considered as reinforcements.
NORM DRAFT
AS+
Shop
04.09.2015