48 volt dc charge controller – 2000 watt -...

1
48 Volt DC Charge Controller – 2000 watt Off-Grid This item is used when charging and maintaining off-grid systems with a battery voltage of 48V DC. This model is very easy to install. All you need to do is connect the 3 wires coming from your Wind Turbine to the 3 green wires attached to the Charge Controller in any order. Next connect your batteries to the Red (positive) and Black (negative) wires. At full rated charging capacity this Wind Charge Controller will put out 41.6 Amps at 48V DC. It has an automatic internal braking system. This unit is designed to work with the 1800 watt max. Wind Turbine. Technical Specifications: Rated Output: 2000W Maximum Output: 2400W System Voltage: 48V DC Output DC Amps: Minimum of 0.1 to 50 Amps max. Brake Start Voltage: 60 V Brake Recovery Voltage: 54 V Weight: 3.6 lbs Type: 3 phase AC input 48V nominal Unit is Waterproof Warranty: 1 year unconditional

Upload: others

Post on 29-Mar-2020

9 views

Category:

Documents


1 download

TRANSCRIPT

48VoltDCChargeController–2000wattOff-Grid

Thisitemisusedwhenchargingandmaintainingoff-gridsystemswithabatteryvoltageof48VDC.Thismodelisveryeasytoinstall.Allyouneedtodoisconnectthe3wirescomingfromyourWindTurbinetothe3greenwiresattachedtotheChargeControllerinanyorder.NextconnectyourbatteriestotheRed(positive)andBlack(negative)wires.AtfullratedchargingcapacitythisWindChargeControllerwillputout41.6Ampsat48VDC.Ithasanautomaticinternalbrakingsystem.Thisunitisdesignedtoworkwiththe1800wattmax.WindTurbine.

TechnicalSpecifications:

RatedOutput: 2000W MaximumOutput: 2400WSystemVoltage: 48VDC OutputDCAmps: Minimumof0.1to50Ampsmax.BrakeStartVoltage: 60V BrakeRecovery Voltage:54VWeight: 3.6lbs Type:3phase ACinput48VnominalUnitisWaterproof Warranty: 1yearunconditional