49550-e

3
Page 1 of 3 Copyright ©2005 Rolls-Royce plc The information in this document is the property of Rolls-Royce plc and may not be copied or communicated to a third party, or used for any purpose other than that for which it is supplied without the express written consent of Rolls-Royce plc. This information is given in good faith based upon the latest information available to Rolls-Royce plc, no warranty or representation is given con- cerning such information, which must not be taken as establishing any contractual or other commitment binding upon Rolls-Royce plc or any of its subsidiary or associated companies. Produced by: Approved by: Creation date: Revision: Sign: Revision date: Introduction User Manual Purpose The purpose of the User Manual is to provide the necessary information for handling, operating, preserving, and maintaining the product. This manual shall also provide information that allows easy and straightforward ordering of spare parts from Rolls-Royce. Target Groups The target groups for this User Manual is the following: • Captain • Chief engineer/engineers • Helmsman • Equipment operator Reading this User Manual The information structure of this user manual is divided into parts for respective subjects, for example, part Maintenance, which contains several sections, for example, Preventative Maintenance and Corrective Maintenance. To complement the general information in this manual a few selected application specific drawings are appended in a part for drawings. The operating instructions are intended for equipment operators. If the personnel operating the vessel are uncertain on any operating task, please consult Rolls-Royce Marine Global Support Network (GSN). The service and maintenance instructions are intended for personnel on board the vessel which have experience of maintenance work of a propulsion system. The maintenance chapter is not meant as a guide for inexperienced personnel. If the personnel performing the maintenance are uncertain of how to perform a maintenance task, please consult Rolls-Royce Marine Global Support Network (GSN) before proceeding. Please note that all illustrations in this manual are schematically correct but they may not be an exact copy of the corresponding equipment on your vessel. For detailed information see part Design Drawings. Writing Conventions When referring to information within a part, the word “section” is used. When referring Nna 2005-10-13 2005-05-31 a Introduction User Manual 49550-E Nna SS

Upload: nicanor-aliaga

Post on 20-Jul-2016

19 views

Category:

Documents


2 download

TRANSCRIPT

Page 1: 49550-E

Produced by: Approved by: Creation date:

Revision: Sign: Revision date:

Nna2005-10-132005-05-31

a

Introduction User Manual 49550-E

NnaSS

Introduction User Manual

PurposeThe purpose of the User Manual is to provide the necessary information for handling, operating, preserving, and maintaining the product.

This manual shall also provide information that allows easy and straightforward ordering of spare parts from Rolls-Royce.

Target GroupsThe target groups for this User Manual is the following:

• Captain

• Chief engineer/engineers

• Helmsman

• Equipment operator

Reading this User ManualThe information structure of this user manual is divided into parts for respective subjects, for example, part Maintenance, which contains several sections, for example, Preventative Maintenance and Corrective Maintenance. To complement the general information in this manual a few selected application specific drawings are appended in a part for drawings.

The operating instructions are intended for equipment operators. If the personnel operating the vessel are uncertain on any operating task, please consult Rolls-Royce Marine Global Support Network (GSN).

The service and maintenance instructions are intended for personnel on board the vessel which have experience of maintenance work of a propulsion system. The maintenance chapter is not meant as a guide for inexperienced personnel. If the personnel performing the maintenance are uncertain of how to perform a maintenance task, please consult Rolls-Royce Marine Global Support Network (GSN) before proceeding.

Please note that all illustrations in this manual are schematically correct but they may not be an exact copy of the corresponding equipment on your vessel. For detailed information see part Design Drawings.

Writing ConventionsWhen referring to information within a part, the word “section” is used. When referring

Page 1 of 3

Copyright ©2005 Rolls-Royce plcThe information in this document is the property of Rolls-Royce plc and may not be copied or communicated to a third party, or used for anypurpose other than that for which it is supplied without the express written consent of Rolls-Royce plc.This information is given in good faith based upon the latest information available to Rolls-Royce plc, no warranty or representation is given con-cerning such information, which must not be taken as establishing any contractual or other commitment binding upon Rolls-Royce plc or any ofits subsidiary or associated companies.

Page 2: 49550-E

49550-E

to information found in another part, the word “part” is used.

All cross references regarding parts, sections, and figures are shown without page numbers. See the table of contents for page numbers to parts and sections.

The titles of any referred drawings are spelled with capital letters, for example, the Hydraulic Diagram drawing.

Acronyms and AbbreviationsThe following acronyms and abbreviations are used in the manual:

• As Req. - As required

• CAN - Controller area network

• CanMan - Controller area network MANoeuvering system platform

• CCN unit - CanMan control node circuit board

• DP - Dynamic positioning

• Drw - Drawing

• ECR - Engine control room

• EMI - Electro magnetic interference

• ESD - Electrostatic discharges

• FPS - Fuel pump setting

• GSN - Global Support Network

• HPP - Hydraulic power pack

• I/I - Current in put/ current out put

• I/O - In/Out

• I/U - Current in put/ voltage out put

• LED - Light emitting diode

• LIC - Load increase control

• LLS - Load limit settings

• O.D. - Oil distribution

• OD-box (M0) - Oil distribution box type M0

• OD-box (F0) - Oil distribution box type F0

• OD-box (F) - Oil distribution box type F

• PC - Printed circuit

• PC Board - Printed circuit board

• Cross Ref. No. - Cross reference number

• RPM - Revolutions per minute

Page 2 of 3 Rolls-Royce Proprietary DataUse of this documentation is to be in line with the limitations on Page 1 in this document.

Page 3: 49550-E

49550-E

• SLIO unit - Seral linked input/output circuit board

• VDR - Voyage data recorder

• Qty - Quantity

Rolls-Royce Proprietary Data Page 3 of 3Use of this documentation is to be in line with the limitations on Page 1 in this document.