4.ipaso ethernet function setting
TRANSCRIPT
-
7/21/2019 4.IPaso Ethernet Function Setting
1/32
NEC Confidential
iPASOLINK ETH FUNCTION SETTING
- Ethernet Port Setting
- Vlan Setting
- Ethernet OAM Setting- Quality Of Service
-
7/21/2019 4.IPaso Ethernet Function Setting
2/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 2
ETHER FUNCTION SETTINGETHER FUNCTION SETTING
-
7/21/2019 4.IPaso Ethernet Function Setting
3/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 3
ETH Function SettingETH Function Setting ETH Port Setting (1 of 2)ETH Port Setting (1 of 2)
Expand Provisioning from LCT menu.Expand ETH Function Setting from Provisioning sub menu.
Select ETH Port Setting from ETH Function Setting sub menu
Current ETH Port setting and port link status are displayed.
Click the main Board Port # to open its ETH Port Setting window
Select the Port Usage enable radio button to use the selected port
Set the other settings accordingly and click the OK button
-
7/21/2019 4.IPaso Ethernet Function Setting
4/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 4
ETH Function SettingETH Function Setting ETH Port Setting (2 of 2)ETH Port Setting (2 of 2)
MDI ports connect to MDIX ports via straight-through twisted pair cabling; bothMDI-to-MDI and MDIX-to-MDIX connections use crossover twisted paircabling, Auto MDI / MDIX removes these restriction on choosing cable type
When sending station transmits data faster than the receiving station can
accept it. The overwhelmed network element will send a PAUSE frame, whichhalts the transmission of the sender for a specified period of time
Port Usage Enable or disable the port (by default it is enabled)
Port Name Any user friendly port name can be used (maximum 32characters)
Media Type Electrical (RJ 45) or Optical (SFP) (by default it is electrical)
Speed Choose among 10 Mbps, 100 Mbps, 1000 Mbps, Auto
Negotiation (by default it is Auto Negotiation)When speed is chosen to be auto negotiated, duplex mode as well asMDI/MDIX will also be auto negotiated
Duplex Mode Full Duplex or Half Duplex (by default it is Full)
MDI or MDIX Medium Dependent Interface or Medium Dependent InterfaceCrossover (by default it is MDI)
Flow Control Enable or Disable Ethernet Flow Control (by default it is disabled)
-
7/21/2019 4.IPaso Ethernet Function Setting
5/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 5
ETH Function SettingETH Function Setting VLAN Setting (1 of 4)VLAN Setting (1 of 4)
Expand Provisioning from LCT menu.
Expand ETH Function Setting from Provisioning sub menu.
Select VLAN Setting from ETH Function Setting sub menu
Current VLAN settings are displayed.
Click on VLAN Setting tab to see the current VLAN setting
Click on VLAN List tab to see the current VLAN List
-
7/21/2019 4.IPaso Ethernet Function Setting
6/32 PT. NEC Indonesia 2010 NEC ConfidentialPage 6
ETH Function SettingETH Function Setting VLAN Setting (2 of 4)VLAN Setting (2 of 4)
ClickAdd VLAN ID to open theAddVLAN ID window
Item Parameter Description
VLAN ID 1 to 4094 SpecifyVLAN ID
VALN
ServiceName
1 to 32
Character
Specify the
servicename of theVLAN
Enter the VLAN ID
Enter a VLAN Service Name for theVLAN ID
Click OK button to close the window
Click Delete VLAN ID to open the DeleteVLAN ID window
Enter the VLAN ID or its VLAN ServiceName to be deleted from the VLAN List
Click OK button to close the delete VLAN
ID window
Confirm the VLAN ID is deleted from thelist
Click the VLAN Service Name to bemodified from the VLAN List
Modify the VLAN Service Name
Click OK button to close the Modify VLANService Name window
Confirm the VLAN Service Name is changedin the VLAN List
-
7/21/2019 4.IPaso Ethernet Function Setting
7/32 PT. NEC Indonesia 2010 NEC ConfidentialPage 7
ETH Function SettingETH Function Setting VLAN Setting (3 of 4)VLAN Setting (3 of 4)
Port Type Access / Truck / Tunnel
Item Parameter Description
Port Type Access Only Allow untagged frame pass through
Tunnel Allow tagged and untagged frame pass through
Trunk Only allow tagged frame pass through
Enable check box Check Check the box to assign the port to the specified
VLAN.Uncheck
Untag Frame Assignment (Access
Port)
Check
Uncheck
Click the Port to which the VLAN ID is tobe assigned.
Port /VLAN Configuration is displayed
Select the Port Type under VLAN Assignment
Modem Port is always Trunk Port type
Select the VLAN ID (s) for the Selected Port
and Port Type by selecting the enable checkboxes
Main Board Ports can beAccess, Tunnel andTrunk Port types
-
7/21/2019 4.IPaso Ethernet Function Setting
8/32 PT. NEC Indonesia 2010 NEC ConfidentialPage 8
ETH Function SettingETH Function Setting VLAN Setting (4 of 4)VLAN Setting (4 of 4)
-
7/21/2019 4.IPaso Ethernet Function Setting
9/32 PT. NEC Indonesia 2010 NEC ConfidentialPage 9
Example of Modem PortExample of Modem Port
Modem port is always Trunk
(tagged frames only)
Modem port transports the VLAN IDs enabled
here. In this example, only tagged frames
belonging to VLAN ID =, 10, 20 , 30, 40 qnd 50are processed on this Modem1 port.
-
7/21/2019 4.IPaso Ethernet Function Setting
10/32 PT. NEC Indonesia 2010 NEC ConfidentialPage 10
Example of Access Port (Untagged Frames only)Example of Access Port (Untagged Frames only)
Only Untagged frames are
processed on Port 3, andthese frames are assumedto belong to VLAN ID = 30
P1 (FE)
FmA
toC
MSGVLANx
Fm
A
to
B
MSGVLAN
30
FmA
toB
MSG
-
7/21/2019 4.IPaso Ethernet Function Setting
11/32 PT. NEC Indonesia 2010 NEC ConfidentialPage 11
Example of Trunk Port (tag/Example of Trunk Port (tag/untaguntag Frames)Frames)
Untagged frames on
Port 1 are assumed tobelong to VLAN ID = 20
Tagged frames on
Port 1 must haveVLAN ID = 10 & 30
P2 (FE)
FmA
toB
MSG
Fm
Ato
CMSGVLAN
30
Fm
Ato
CMSGVLAN
30
FmA
toB
MSGVLAN20
FmA
toC
MSGVLANother
-
7/21/2019 4.IPaso Ethernet Function Setting
12/32 PT. NEC Indonesia 2010 NEC ConfidentialPage 12
Example of Tunnel Port (Any Frame Forwarding)Example of Tunnel Port (Any Frame Forwarding)
Any frame type on Port 3, ei ther
untagged or tagged with any VLAN
ID, wil l be unconditionally tagged
(Outer Tag) with VLAN ID = 30 andthen processed.
P3 (FE)
Fm
A
to
BMSG
Fm
A
to
C MSG1
VLAN
any
FmA
toB
MSGVLAN30
FmA
toC
MSG1VLAN30
VLANany
-
7/21/2019 4.IPaso Ethernet Function Setting
13/32 PT. NEC Indonesia 2010 NEC ConfidentialPage 13
ETH Function SettingETH Function Setting ETH OAM (1 of 4)ETH OAM (1 of 4)Ethernet OAM (Operations, Administration, and Maintenance)
Expand Provisioning from LCT menu.
Expand ETH Function Setting from Provisioning sub menu.
Select ETH OAM Setting from ETH Function Setting sub menu
Select OAM MEP tab to see the current MEP Index entries
Select OAM MIP tab to see the current MIP entries
Select OAM MEG tab to see the current MEG entries
Maintenance End Point
Maintenance Intermediate Point
Maintenance Entity Group
-
7/21/2019 4.IPaso Ethernet Function Setting
14/32 PT. NEC Indonesia 2010 NEC ConfidentialPage 14
ETH Function SettingETH Function Setting ETH OAM (2 of 4)ETH OAM (2 of 4)
MEP Index Index (Serial) No. of the MEP1 to 192
MEP ID Unique ID of MEP 1 to 8191
CCM Transmit / Receive Enable ordisable CCM (Continuity Check Messages)transmit and/or receive
CCM Priority - Set priority for CCM 0 to 7
VLAN Untag Choose if VLAN tag to beused with Ethernet OAM messages or not
Item Choose among Main Board /Modem1 / 2
Port Choose the port number
ETH OAM Source MAC Address Specify
the MAC address to be used as source MACaddress of Ethernet OAM messages
-
7/21/2019 4.IPaso Ethernet Function Setting
15/32 PT. NEC Indonesia 2010 NEC ConfidentialPage 15
ETH Function SettingETH Function Setting ETH OAM (3 of 4)ETH OAM (3 of 4)
MEG Configuration - Maintenance Entity Group (Add / Delete)
Enable enables an MEG
MEG Index Serial Number of MEG (1 to 5)MEG ID Unique ID for MEG
MEG Level hierarchy level of MEG (0 to 7)
ETH-CC Period Ethernet Continuity Check Message Period in ms or s
Peer MEP Configuration
Enable
Peer MEP ID (1 to 8191)
Peer List Check Status Enabled
-
7/21/2019 4.IPaso Ethernet Function Setting
16/32 PT. NEC Indonesia 2010 NEC ConfidentialPage 16
ETH Function SettingETH Function Setting ETH OAM (4 of 4)ETH OAM (4 of 4)
MIP (Maintenance Intermediate Point)Settings Add / Modify / Delete
MIP Index 1 to 32
MEG Level 0 to 7
Item Main Board / Model 1 / 2
Port Port No.
Enable Enable or disable
VLAN ID VLAN ID to be used
Service Name VLAN Service Name
-
7/21/2019 4.IPaso Ethernet Function Setting
17/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 17
ETH Function SettingETH Function Setting RSTP Setting (1 of 2)RSTP Setting (1 of 2)
Item Parameter Description
STP Mode RSTP Enable RSTP (Rapid Spanning Tree
Protocol)Disable Disable RSTP
Enable Check Enable RSTP on the port.
Uncheck Disable RSTP on the port.
Item Main Board
MODEM 1
MODEM 2
Select the object from drop-down list
Port - Select the port from drop-down list
Port Name 1 to 32Character
Specify the port name
Path Cost Auto Enable equipment calculate the pathcost automatically.
Manual Enter the path cost manually.
Path CostValue
1 to200000000
Enter the cost of path when PathCost is set to Manual
PortPriority
0 to 240 Specify the RSTP priority of the port
Edge Enable Set the Port as Edge port
Disable Remove Edge port feature
P-to-P Force true Enable Point-to-pointForce False Disable Point-to-point
Auto Set Point-to-point automatically
-
7/21/2019 4.IPaso Ethernet Function Setting
18/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 18
ETH Function SettingETH Function Setting RSTP Setting (2 of 2)RSTP Setting (2 of 2)
Item Parameter
Description
STP Bridge Priority 0 to61440
Set STP priority of the bridge
STP Bridge MAXAge
6 to 40 s Set the expiration of the Configuration
BPDU stored, Bridge will. notice that a
topology change has occurred after the
Max Age time elapses and the BPDU isaged out
STP Bridge HelloTime
1 s Set the period of sending ConfigurationBPDUs from Root Bridge.2 s
STP BridgeForward Delay
4 to 30 s Set the delay when the port is going tochange the state from Listening toLearning.
STP TX Hold 1 to 10 Set the number of BPDU which can be
-
7/21/2019 4.IPaso Ethernet Function Setting
19/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 19
QUALITY OF SERVICE SETTINGQUALITY OF SERVICE SETTING
ETH Function SettingETH Function etting QoS/Classification (1o / lassification (1
-
7/21/2019 4.IPaso Ethernet Function Setting
20/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 20
ETH Function SettingETH Function etting QoS/Classification (1o / lassification (1of 7)of 7)
Classify Field Type
VLAN CoS 802.1 q / p
IPv4 Precedence
Classify Priority used to classify
Classify Internal Priority
ETH Function SettingETH Function etting QoS/Classification (2o / lassification (2
-
7/21/2019 4.IPaso Ethernet Function Setting
21/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 21
ETH Function SettingETH Function etting QoS/Classification (2o / lassification (2of 7)of 7)
ETH Function SettingETH Function etting QoS/Classification (3o / lassification (3
-
7/21/2019 4.IPaso Ethernet Function Setting
22/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 22
ETH Function SettingETH Function etting QoS/Classification (3o / lassification (3of 7)of 7)
Classify Setting tab
iPASOLINK supports QoS based on MEF10 and REC4115 which classify the traffic into eight classes with the properInternal Priority according to the predetermined Policer. Except the default Policer, user can configure up to three
additional Policer which provide user the capability of realizing the user-orientation QoS strategy flexibly. The
Internal Priority is used for following purpose:
1) Identify Ingress traffic properly according to the predetermined Policer.
2) Mapping the eight classes of ingress traffic to four classes when queuing the Egress traffic
3) Copy the original internal priority to the capsulated frame to prevent the traffic priority from changing unexpectedly. (VLAN c-tagCoS/VLAN s-tag CoS)
Ingress
At the Ingress of the traffic, assign the internal priority and then perform flow control according to the predetermined policer,
coloring the frame with Yellow or Green which decide the QoS queue at the egress, discarding the frames of the traffic thatexceed the designated bandwidth (EIR, Excess Information Rate).
Egress
Queuing the frame according to the internal priority and the color assigned at ingress, determine forwarding or discardingthe frame.
ETH Function SettingETH Function etting QoS/Classification (4o / lassification (4
-
7/21/2019 4.IPaso Ethernet Function Setting
23/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 23
ETH Function SettingETH Function etting QoS/Classification (4o / lassification (4of 7)of 7)
Item Parameter Description
QoS Port Setting Information
Scheduling Mode 2xSP Specify the queuing mode.
SP: Strict-Priority
DWRR: Deficit Weighted Round Robin
4xSP
1xSP+3xDWRR
4xDWRR
Port Drop Mode WTD Specify the port discard all packets at the tail end of the
queue when queue exceeded the pre set threshold. WTD
(Weighted tail drop).WRED Specify the port randomly discard the packets of lower
priority traffic before higher priority traffic when queue
exceeded the preset threshold. WRED (weighted randomearly detection).
Egress Shaper Rate 0 to 1000 Mbps Specify the maximum sending rate of the egress queue.
Internal Priority Queuing Policy per Ingress PortInternal Priority 0 to 7Class
0 to 7 Set the priority of Ingress port
Egress Class Setting Information
Class Shaper Rate 0 to 1000 Mbps Specify the maximum sending rate of the class.
Class DWRR Weight 1 to 127 Specify the weight of the queue.
Class Queue Length 16 to 128 Kbyte Specify the length for each Queue.
Queue 6 and 7 is fixed at 16Kbyte.
Wtd Yellow FrameThreshold
10 to 100 % Set the Threshold of Yellow Frame
ETH Function SettingETH Function etting QoS/Classification (5o / lassification (5
-
7/21/2019 4.IPaso Ethernet Function Setting
24/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 24
ETH Function SettingETH Function etting QoS/Classification (5o / lassification (5of 7)of 7)
ETH Function SettingETH Function etting QoS/Classification (6o / lassification (6
-
7/21/2019 4.IPaso Ethernet Function Setting
25/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 25
ETH Function SettingETH Function etting QoS/Classification (6o / lassification (6of 7)of 7)
ETH Function SettingETH Function etting QoS/Classification (7o / lassification (7
-
7/21/2019 4.IPaso Ethernet Function Setting
26/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 26
ETH Function SettingETH Function etting QoS/Classification (7o / lassification (7of 7)of 7)
ETH Function SettingETH Function etting QoS/Classification (7o / lassification (7
-
7/21/2019 4.IPaso Ethernet Function Setting
27/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 27
ETH Function SettingETH Function etting QoS/Classification (7o / lassification (7of 7)of 7)
ETH Function SettingETH Function etting QoS/Classification (7o / lassification (7
-
7/21/2019 4.IPaso Ethernet Function Setting
28/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 28
ETH Function SettingETH Function etting QoS/Classification (7o / lassification (7of 7)of 7)
ETH Function SettingETH Function etting QoS/Classification (7o / lassification (7
-
7/21/2019 4.IPaso Ethernet Function Setting
29/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 29
ETH Function SettingETH Function etting QoS/Classification (7o / lassification (7of 7)of 7)
-
7/21/2019 4.IPaso Ethernet Function Setting
30/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 30
ProvisioningProvisioning LLF SettingLLF Setting
-
7/21/2019 4.IPaso Ethernet Function Setting
31/32
PT. NEC Indonesia 2010 NEC ConfidentialPage 31
Thank youThank you
This training document describes the current version of the equipment.
The specifications or configuration contained in this document are subject to changewithout notice.
-
7/21/2019 4.IPaso Ethernet Function Setting
32/32