4pld a/m cv - vamag.com · 4pld a/m cv max measured wheel load 20.000n measuring range 20.000n test...
TRANSCRIPT
vamag.com - [email protected]
4PLD A/M CVPLATFORM BRAKE TESTER
WITH CHANGEABLE WHEEL TRACK
ROLLER DISTANCE : da 0 a 590 mmUSEFUL WHEEL TRACK : da 200 a 2.400 mm
4PLD A/M CV
MAX MEASURED WHEEL LOAD 20.000NMEASURING RANGE 20.000N
TEST SPEED 7-15Km/hMEASURING RESOLUTION 1N
PLATFORM COVERING PROFILO “U1”POWER SUPPLY 220V 1PH 50Hz
POWER CONSUMPTION 500w
DIMENSIONSDIMENSION OF PIT INSTALLATION 4084x 2415 x 70mm
DIMENSION OF ON-FLOOR INST. 5417 x 2600 x 70mm USEFUL TRACK max 2400mm
WIDTH OF THE SHEET 900 mmWEIGHT OF THE INSTALLATION BIDIRECTIONAL DIGITAL SYSTEMS
USED SENSORS WITHOUT ANY MOVEMENTSSUITABLE FOR CARS, MO-
TESTABLE VEHICLES MOPEDS, 3-WHEELERS & QUAD
DATI TECNICI
An efficient workshop, costs less and makes more.
an Italian Service 4.0
L‘azienda si riserva il diritto di modificare in qualsiasi momento i prodotti. Le immagini possono scostarsi dal prodotto. Printing errors, mistakes and technical changes reserved. Illustrations can deviate from the products.
VAMAG srlVia G. Pascoli, 15 - 21012 Cassano Magnago Va - ItalyTel. +39.0331.205963 - fax +39.0331.200485
vamag.com - [email protected]
A full range of platforms brake testers, intro-duced by Vamag first in Italy. A combination of technology and reliability for modern service centers that need to carry out tests accurately yet with time and energy costs significantly lower than the use of conven-tional roller brake testers.
The current production includes models with both standard wheel track and wider whe-el track, with platforms in galvanized wire mesh or coated or new Profil U1.
A FULL RANGE OF PLATFORMS BRAKE TESTERS
New platform brake tester with changeable wheel track suitable for every vehicle under testing.This product was born thanks to Vamag experience and to the necessity to have in the inspection centre, one test bench that in one test only can cgeck 2,3,4 wheel vehicles. The bench is so flexible that can change its wheel track from a minimum of 0 mm to a maximum of 2.400 mm. Technical improvement paired with a nice look complement each other with a high technological layout. The new covering guarantees an adherence coefficient never seen before on a platform.It reacts with high accuracy in every testing condition, with nothing to compare with every other product in use untile now.
4PLD A/M CVWith Changeable Wheel
VERSION U1Platforms with new Profils U1
HIGH ADERENCE COEFFICIENT WITH NO TYRE DAMAGE.