5 axis vise
DESCRIPTION
5 axis vise systemTRANSCRIPT
2
Vischer & Bolli
The optimal solution for the followingkey requirements
unrestricted all-around access to the work-piece aoptimum clamping height above the tablehigh clamping force 3400 kg / 7700 lb b, secure clamping with grip jaws clow clamping depth csuitability for raw or premachined, cubical, round or odd shaped parts dun-parallel parts are easily clamped evariable clamping range, 1 - > 1000 mm (0,1” - > 40”)minimum weighteasy loadingflexibilityoperational from two sides
Obstruction free5-side machining
With a clamping depth of just 4 or 8 mm [.157” or .315”] and a freely selectable clamping height of 100, 125, 150 and 175 mm [3.93”, 4.92”, 5.90” , 6.89”] (page 4) above the table, machining is done in the best possible position for machine tool and work-piece. This creates the possibility of working with the shortest and most stable tools.Cube, round and odd shaped work-pieces can be clamped to fit their shape easily with the SERRATED grip jaws with no need for previous embossing! Additionally pre-machined work-pieces can be clamped accurately using machinable soft jaws and support-plates . The clamping range is limited only by the size of the machine table.
More and more companies are investing in 5 axis machining centres to enable increasingly challenging require-ments for more complex work-pieces, shorter run times and smaller batch sizes to be satisfied.
Growing importance therefore attaches to the workholding method for which new solutions must be found.
8 m
m (0
,315
“)4
mm
(0,1
57“)4
1
4
5
3
3
for full specifications & ordering information visit the web site
www.5axisvise.com
3
Vischer & Bolli
conventional
The clamping force is generated right below the clamping surface. This completely prevents spreading of the clamping jaws, as can happen if conventional high clamping jaws are used on bed rails with a low mounted spindle.
Clamping force
parallel clamping
no flare out under tension
Clamping force
opens under working strain
2 2
The vise can be mounted directly on T-slot (page 6) or grid machine tables (page 7), grid-plates, pallets or on a base plate (page 5). This base plate includes a number of holes that permit a link to most T-slot or grid machine tables.
for full specifications & ordering information visit the web site
www.5axisvise.com
4
Vischer & Bolli
Clamping capacity
Spindle setup
Locking slot
Locking slot
Secure spindle nut part no. 742008 withset screws part no. 742 SM5x6 on locking slots
Spindle nutpart. no. 742008
Spindle
Locking nutspart no. 742009
Mount locking nuts part no. 742009 with play,secure with locking screwpart no. 742 M6x30
Locking screwpart no. 742 M6x30
Locking screwpart no. 742 M6x30
Locking screwpart no. 742 M6x30
Mounting adapter part no. 742000Mounting aid for driving sleeve orlocking nut
Mounting adapterpart no. 742000Mounting aid for drivingsleeve or locking nut
minimumthread reach in todriving sleeve
Driving sleevepart no. 742011,secure with lockingscrewpart no. 742 M6x30
Spindlemax. tightening 120 Nm / 90 ft-lbclamping force 3400 kg / 7700 lb
Part no. Spindle length Clamping range max. tighteningclamping force
742010-120 120 mm (4.724“) 0 – 120 mm (4.724“)120 Nm / 90 ft-lb3400 kg / 7700 lb
742010-220 220 mm (8.661“) 0 – 220 mm (8.661“)742010-320 320 mm (12.598“) 0 – 320 mm (12.598“)
Spindle
Clamping range
heig
ht10
0 / 1
25 /
150
/ 175
(3.9
37“/
4.9
21“/
5.9
06“/
6.8
90“)
100(3.937“)
Clamping of larger parts is easily done by joining 2 or more spindles together with the coupling nut.
for full specifications & ordering information visit the web site
www.5axisvise.com
5
Vischer & Bolli
Vise with mounting blocksfixed jaw side part no. 742001-63
moving jaw side part no. 742002-63T-slot baseplate 742...-T126
vb 5
ax
100
- 100
vb 5
ax
100
- 12
5
vb 5
ax
100
- 15
0
vb 5
ax
100
- 17
5
L =
400
mm
(15
.748
”)
Par
t no
. 742
400-
T126
L =
500
mm
(19
.685
”)
Par
t no
. 742
500-
T126
L =
600
mm
(23
,622
”)
Par
t no
. 742
600-
T126
Order no.742 Set 01 x x
742 Set 02 x x
742 Set 03 x x
742 Set 04 x x
742 Set 05 x x
742 Set 06 x x
742 Set 07 x x
742 Set 08 x x
742 Set 09 x x
742 Set 10 x x
742 Set 11 x x
742 Set 12 x x
Set to fit T-slot baseplate
250
(9.8
43“)
L
Set consisting of:Vise with mounting blocks and T-slot baseplate– 1 x spindle 120 mm (4.724“) (Item. 15) part no. 742010-120 clamping range 0-120 mm– 2 x grip jaw 8 mm (0,315“) (Item. 22 ) part no. 742006-8
ready to use on most machine tables
22
2
1
10
15
- 100widthmm
heightmm
heig
ht10
0/12
5/15
0
(3.9
37“/
4.9
21“/
5.9
06“)
heig
ht17
5(6
.890
“)10
0(3
.937
“)
for full specifications & ordering information visit the web site
www.5axisvise.com
6
Vischer & Bolli
Vise
Mounting blocks to fitT-slot machine table (see page 11)
Item. 1 (fixed jaw side)Item. 2 (moving jaw side)
vb 5
ax -
100
- 1
00
vb 5
ax -
100
- 1
25
vb 5
ax -
100
- 1
50
vb 5
ax -
100
- 1
75
fixed
jaw
sid
ePa
rt no
. 742
001-
63
mov
ing
jaw
sid
ePa
rt no
. 742
002-
63
fixed
jaw
sid
ePa
rt no
. 742
001-
50
mov
ing
jaw
sid
ePa
rt no
. 74
2002
-50
fixed
jaw
sid
e Pa
rt no
. 742
001-
40
mov
ing
jaw
sid
ePa
rt no
. 742
002-
40
fixed
jaw
sid
e Ar
t. N
r. 74
2001
-1
mov
ing
jaw
sid
ePa
rt no
. 742
002-
1
Order no.742 Set 30 x x
742 Set 31 x x
742 Set 32 x x
742 Set 33 x x
742 Set 34 x x
742 Set 35 x x
742 Set 36 x x
742 Set 37 x x
742 Set 38 x x
742 Set 39 x x
742 Set 40 x x
742 Set 41 x x
742 Set 42 x x
742 Set 43 x x
742 Set 44 x x
742 Set 45 x x
Set to fit T-slot machine table
Set consisting of:Vise with mounting blocks Item. 1 + Item. 2
– 2 x key way nut T18-T14 (Item. 8) part no. 742001-1814– 8 x shoulder bush Ø16 -Ø12 (Item. 9) part no. 742001-1612– 8 x screw M12x45 (Item. 10) part no. 742 M12x45– 8 x T-nut (Item. 11) part no. 775-PT06-1412– 1 x spindle 120 mm (4.724“) (Item. 15) part no. 742010-120 clamping range 0-120 mm– 2 x grip jaw 8 mm (0,315“) (Item. 22) part no. 742006-8
8
1111
10
9
1
2
22
15
key way nut
T-nut
shoulder bush
screw M12x45
Mounting blocks assembly
mounting block
14+0,-0,0
12+0,-0,0
10+0,-0,0
Ø
Ø
Ø
Item. 9 shoulder bush
Item. 11 T-nut
Item. 8 key way nut
to fit T-slot
T-slot
ø16
18 H7
12 g7
14 g7
16 g7
18 g7
2
2
2
for full specifications & ordering information visit the web site
www.5axisvise.com
- 100widthmm
heightmm
7
Vischer & Bolli
Set to fit grid machine table
Set consisting of: Vise with mounting blocks (Item. 1 + Item. 2) mounted to off-center-position-grid spacing 50 or 40 by brackets.– 1 x spindle 120 mm (4.724“) (Item. 15) part no. 742010-120 clamping range 0-120 mm– 2 x grip jaw 8 mm (0,315“) (Item. 22) part no. 742006-8– 4 x bracket to grid 50 Ø16 (Item. 29) part no. 742015-50– 8 x shoulder bolt M16 for grid 50 (Item. 30) part no. PT31-1665 or– 4 x bracket to grid 40 Ø12 (Item. 29) part no. 742015-40– 8 x shoulder bolt M12 for grid 40 (Item. 30) part no. 742 M12-36-55
2930
30
2
1
22
15
VisesMounting blocks to fit grid, spacing 50 or 40 (see page 11)
Item. 1 (fixed jaw side)Item. 2 (moving jaw side)
vb 5
ax 1
00 -
100
vb 5
ax 1
00 -
125
vb 5
ax 1
00 -
150
vb 5
ax 1
00 -
175
grid spacing 50 Ø16M16
mounting blocks to fit onoff-center-position-grid bybrackets part no. 742015-50
fixed jaw sidepart no. 742001-50
moving jaw sidepart no. 742002-50
(set fits 630 pallets)
grid spacing 40 Ø12M12
mounting blocks to fit onoff-center-position-grid bybrackets part no. 742015-40
fixed jaw sidepart no. 742001-40
moving jaw sidepart no. 742002-40
Order no.742 Set 50 x x
742 Set 51 x x
742 Set 52 x x
742 Set 53 x x
742 Set 54 x x
742 Set 55 x x
742 Set 56 x x
742 Set 57 x x
Blank mounting blockspart no. 742002-1 / 742001-1 tofit on center-position-grid 50Ø16M16 mounted with bracketspart no. 742015-50(set fits 500 pallets)Blank mounting blocks can bemachined to fit any custom size
Mounting blockspart no. 742001-63 / 742002-63 tofit on center-position-grid 40Ø12M12 mounted with bracketspart no. 742015-40
742 Set 60 x x
742 Set 61 x x
742 Set 62 x x
742 Set 63 x x
742 Set 64 x x
742 Set 65 x x
742 Set 66 x x
742 Set 67 x x
for full specifications & ordering information visit the web site
www.5axisvise.com
- 100widthmm
heightmm
Examples of applications
Vischer & Bolli AG
Machining and workholding
Im Schossacher 17
CH-8600 Dübendorf / Switzerland
for full specifications & ordering information visit the web site www.5axisvise.com
TOMBSTONECITY3901 SE Saint Lucie Blvd Stuart FL 34997Ph (631) 385 - 9452Fax (631) 424 - [email protected]