50-point performace indicators (core/desirable) self ... point performance... · 50-point...

1

50-Point Performace Indicators (Core/desirable)

Self Assessment

Submitted to National Assessment and Accreditation Council

Bangalore

Thapar Institute of Engineering and Technology University,

Patiala (Punjab) – India

November 2015

2

NNaattiioonnaall AAsssseessssmmeenntt aanndd AAccccrreeddiittaattiioonn CCoouunncciill ((NNAAAACC))

A. Core Indicators

1. Percentage of courses where major syllabus restructuring was carried out

during last 3 years.

All undergraduate and postgraduate programs went through a major

restructuring of syllabus and course scheme during the last three years.

2. Temporal Plan in more than 50% programmes (CBCS/Semester/Annual)

Thapar Institute of Engineering and Technology University uses the Choice

Based Credit System (CBCS) programme in which the students study the

prescribed courses, which are referred as core and professional and have a

choice to chose an elective or minor or soft skill courses and the entire

assessment is graded-based on a credit system. There are three main course

types: Core, Professional and Elective. All the three main courses types are

evaluated and accessed to provide for an effective and balanced result.

The assessment is done semester wise. A student progresses on the basis of

the courses taken. Each semester has 18 weeks of academic work which is

equal to 90 teaching days. There is flexibility in creating the curriculum and

assigning credits based on the course content and hours of teaching. Each

course is assigned a certain credit which is based on 1 credit for every lecture

per week and ½ credit for tutorial or laboratory hour per week. When the

student passes that course, he/she earns the credits which are based on that

course. If a student passes a single course in a semester, he/she does not have

to repeat that course later. If for some unforeseen reasons, he/she cannot cope

with the study load or falls sick, the student has the freedom to study fewer

courses and earn fewer credits and can compensate this in the next semester.

There is a continuous evaluation of the student.

Thapar uses a 10-point grading system for the past 21 years. One credit per

semester is equal to one hour of lecturing (L) or two hours of practical

work/field work or tutorial (P or T) per week. A study course can have only L

component or only T or P component or combination of any two or all the

three components. The total credits earned by a student for each semester is

L+T+P.

3. Percentage of teachers with Ph.D. qualification General Courses. Profession

courses (for. MD/DM for Medicine and ME.MS for Engineering)

3

As on date 215 members of academic staff have PhD out of a total strength of

309, which is approx 70%.

4. Student computer ratio

In each lab class, every student is provided with an individual PC to work on.

The University has over 1500 computers for 6000 full time UG/PG students

which is 4 : 1.

5. The number of department with UGC/SAP/CAS/DST/FIST etc, in

university.

All the University departments and schools have UGC/SAP/CAS/DST/FIST

etc, sponsored projects. The details of number of ongoing projects and

amount sanctioned is provided in the Table below:

6. Number of Post Doctoral fellows/Research associated working a) Locals b)

outsiders.

The University funds 108 research scholars every year through its own

resources locally and there are several others who have been appointed as

research associates in the 127 sponsored projects.

7. Number of ongoing research projects/per teacher.

127/309= 1 : 0.44

Dept/School Number of Projects

Amount Sanctioned

(Lakhs)

CED 11 272.91

CHED 12 189

CSED 7 83.31

DBTES 19 371.17

ECED 5 142.62

MED 5 101.64

SHSS 3 16.8

SCBC 26 510.24

SEE 4 66.22

SMCA 6 134.42

SPMS 28 537.8

EIED 1 26.62

127 2452.75

4

8. Number of completed research projects /per teacher (Funded by

National/International agencies)

18/309=0.05

The list of Sponsored Projects(Infrastructure and Research) completed as on

31.3.2015 is appended at Annexure 1 to this document.

9. Coordinated/collaborative projects (National and International)

There are 127 ongoing research projects ongoing in the University as on date.

The list of these projects is provided in Annexure 2 to this document.

10. National recognitions for faculty for teaching/ Research/ consultancy/

extension (reputed/recognised bodies)

Recognitions for Faculty:

Sr. No Year Awards/Recognition received at national/international level by

faculty

Name of

Faculty

Awards/Recognition National/International

1. 2009-10 Dr.

Dwarikanath

Ratha

Best paper award in

Journal of Hazardous,

Toxic, Radioactive

Waste, ASCE

International

2. 2010-11 Dr. Maneek

Kumar

Was nominated and

continued to be a

member of the State

Expert Appraisal

Committee of MoEF for

Punjab

National

3. 2011-12 Dr. Vikas

Pratap Singh

Best paper award in

Indian Geotechnical

Journal

National

4. 2012-13 Dr.

Dwarikanath

Ratha

Best paper award in

Journal of Hazardous,

Toxic, Radioactive

Waste, ASCE

International

5. 2012-13 Dr. Naveen Kwatra

Best M E Thesis guide award from Indian Society of Wind

National

5

Engineering

6.

2013-14 Dr. Maneek Kumar

Nominated as Member, Board of Studies of Civil Engineering of Kurukshetra University and MM Engineering College, Mullana, Ambala

National

7. 2013-14 Dr. Naveen Kwatra

Nominated as Member, Board of Studies of Civil Engineering of HPTU, Hamirpur and Bahara University, Solan

National

1. 2013-14 M S Reddy Agnihothrudu Memorial

award

Mycological Society of

India

National

2. 2013-14 Dr. Sanjai

Saxena

Eminent Microbiologist

Award

Association of

Advancement of

Biodiversity Science,

Dharwad, Karnataka

National

3. 2013-14 Dr. Sanjai

Saxena

Fellow Fellow ABS

Association of

Advancement of

Biodiversity Science,

Dharwad, Karnataka

National

4. 2013-14 Vikas Handa Member of Jury,

Evaluated projects /

models in INNOTECH-

2014

Pushpa Gujral Science

City, Kapurthala in

collaboration with

Punjab Technical

University, Kapurthala

National

5. 2013-14 Dr. Maneek

Kumar

Member, Board of

Studies of Civil

Engineering

Kurukshetra University,

Kurukshetra

National

6

6. 2013-14 Dr. Maneek

Kumar

Member, Board of

Studies of Civil

Engineering

MM Engineering

College, Mullana,

Ambala

National

7. 2013-14 Dr. Naveen

Kwatra

Member, Board of

Studies of Civil

Engineering

HPTU, Hamirpur

National

8. 2013-14 Dr. Naveen

Kwatra

Member, Board of

Studies of Civil

Engineering

Bahara University, Solan

National

9. 2013-14 Dr. Deepak

Garg

Session Chair

IEEE 4th International

Conference on Advance

Computing (IACC-14) at

ITM University,

Gurgaon

International

10. 2013-14 Dr. Deepak

Garg

Keynote Address at

IEEE International

Conference on MOOC,

Innovationa and

Technology in Education

Poornima Group of

Colleges, Jaipur

International

11. 2013-14 Dr. Deepak

Garg

Keynote Address:

MOOCs in the current

context

CII Conference on e-

learning and e-

publishing, Hotel park

Sheraton, Chennai

National

12. 2013-14 Dr. Deepak

Garg

Chair at IEEE

International Conference

on MOOC, Innovation

and Technology in

International

7

Education MITE

Poornima Group of

Colleges, Jaipur

13. 2013-14 Dr. Deepak

Garg

Keynote address on

Various Aspects of

MOOCs , IEEE

International Conference

on Management of

Knowledge Economy

(IMKE-2013)

Chitkara University,

Punjab

International

14. 2013-14 Dr. Deepak

Garg

Keynote Address at

IEEE International

Conference on MOOC,

Innovationa and

Technology in Education

(MITE 2013) Conference

Poornima Group of

Colleges, Jaipur

International

15. 2013-14 Dr. Deepak

Garg

Invited Jury Member

5th DSCI best practices

meet by DSCI (Data

Security Council of

India, A Nasscom

Initiative)

National

16. 2013-14 Dr. Maninder

Singh

Instructor Excellence

Award: Expert Level

CISCO Networking

Academy

National


Singh

Instructor Years of

Service

CISCO Networking

Academy

National


Singh

Science Direct TOP25:

Jan-March 2013

Science Direct

National


Singh

Certified Ethical Hacker

EC_Council, USA

International

8

20. 2013-14 Dr. Parteek

Bhatia

Gold Medal in 3rd UNL

Olympiad

UNDL Organization,

Switzerland

International

21. 2013-14 Karamjit Kaur DST Complete Financial

Assistance to attend

EDBT Summer School

held in France.

DST

National

22. 2013-14 Karamjit Kaur Google Global

Scholarship for

attending GHC held in

USA.

Google

International

23. 2013-14 Dr. Ravinder

Agarwal

Best paper award

Admet - 2014

National

24. 2013-14 Ms. Manbir

Kaur

Member Fellowship

IET London

International

25. 2013-14 Ms. Manbir

Kaur

First Prize in an event

CVC-2013,

Sri Lanka

International

26. 2013-14 Ms. Suman

Bhullar

Best Paper Award

7th Int. Conf.on

Advanced Computing

and Communication

Technologies, APIIT,

Panipat

International

27. 2013-14 S.P. Nigam

Chairman, Recruitment

and Assessment Board

DRDO, Govt. of India

National

28. 2013-14 Dr. S. K

Mahla

ISTE Best Teacher

Award for year 2013

National

29. 2013-14 Dr. A.S

Reddy

Member State Expert

Appraisal Committee –

SEAC Pb

Punjab state

National

30. 2013-14 Dr. Deepak

Gumber

UGC Research Award

UGC

National

31. 2014-15 Dr. Rajeev

Mehta,

Joint Runner-up for 5th

National Award for

National

9

Professor,

CHED,

Technology Innovation

in Petrochemicals &

Downstream Plastics

Processing Industry in

the category of Research

in the Field of Polymer

Science & Technology

for the Innovation in

“Chemical Fixation of

Carbon dioxide and

Propylene Oxide to Poly

(Propylene Carbonate)

and Cyclic Carbonate”

held at The Lalit Ashok,

Bangalore

11. Number of Patents

There are at the moment 20 patents filed or awarded. The status is provided in

the Table below:

Dr. M.S. Reddy 1. A novel additive for building materials, and methods of preparation and application thereof. Applied in September 2013. Application number: 2191/DEL/2013

Dr. Dinesh Goyal 2. 1. A process for chromium VI removal from industrial effluents by waste biomass

Indian Patent No. 244750; Date of publication 24.12.2010; Journal No. 52/2010 Inventor: Ahluwalia AS and Goyal Dinesh

3. Improved bio-mechanical organic waste converter

and its method of use thereof Patent Filing No. 3413/DEL/2015 Inventor: Akhtar Nadeem and Goyal Dinesh

Dr.Sanjay Sexena 4. Process of Preparation of Herbicides from Fungus

Alternaria alternate, Indian Patent No. 192946. (Granted)

5. Process of Preparation of Herbicides from Fungus Alternaria alternate, United States Patent No. 7.585,661 B2, dated 9 September 2013 . (Granted)

6. A process of preparation of an antimicrobial extract

10

from the leaves of the plant Callistemon rigidus, Indian Patent No. 233621, Jointly in the name of innovator, Thapar Institute of Engineering and Technology University and Department of Biotechnology, Ministry of Science and Technology , Govt. of India . (Granted)

PATENTS IN NATIONAL PHASE IN DIFFERENT

COUNTRIES

7. A process of producing herbicides from the fungus Alternaria alternata, Australian Patent Application No. 2002337607

8. A process of producing herbicides from the fungus Alternaria alternata, European Patent Application No. 02 772 800.5

9. A process for the preparation of an anti-microbial extract from leaves of the plant Callistemon rigidus, US application. # 11/995,412.

10. A process for the preparation of an anti-microbial extract from leaves of the plant Callistemon rigidus, Australian Patent Application # 2006267813

11. A process for the preparation of an anti-microbial extract from leaves of the plant Callistemon rigidus, German Patent Application #112006 001833.7

Dr. Moushumi Ghosh

12. A process for removal of phosphorous from waste water; 2008, IP:177753

13. A novel method to capture heavy metals and phosphorous from potable water; 2009, IP(NF/327/2009)

14. Development of antimicrobial polyquacs for potable water treatment; 2009,IP(NF/2013)

Dr. A.K. Chatterjee 15. Government of India, Patent No. 216795, Application No. 2123/DEL/1998 on “Digital Fulltime Measurement Circuit.”(This patent has lived its life and has been withdrawn two years ago.)

Dr. Shweta 16. Patent Filed: An improved Technique for prestressing with FRP Sheets 2013

Kumar Gyanendra, Surolia Avadhesha, Kumar Sanjay, Chhibber

Manmohan, Surolia Namita, Sharma

17. 2-Thixothiazolidin-4-one compounds and composition as antimicrobial and antimalarial agents targeting enoyl-aco reductase of type II fatty acid synthesis pathway and other cell growth pathway. Patent No: 2007201027 (04.02.2013)

11

Shailendra k, Sharma Shilpi, Parasuraman Prasanna

Australia

Kumar Gyanendra, Surolia Avadhesha, Kumar Sanjay, Chhibber

Manmohan, Surolia Namita, Sharma Shailendra k, Sharma Shilpi, Parasuraman Prasanna

18. 2-Thixothiazolidin-4-one compounds and composition as antimicrobial and antimalarial agents targeting enoyl-aco reductase of type II fatty acid synthesis pathway and other cell growth pathway Patent No: 136059 (31.03.2013) Singapore

Ravinder Kumar Duvedi 19. Drop and Tilt Method of Tool Positioning for 5-Axis Machining of Triangulated Surfaces (Filled)

Rajeev Mehta 20. POLYLACTIC ACID AND A PROCESS FOR PREPARATION THEREOF (Published)

12. Output of MPhil & Ph.D per faculty

Year No. of Students Awarded Degree

No. of Faculty

Output per faculty

M.Tech/MSC PhD M.Tech/MSc PHD

2013 384 46 257 1.49 0.18

2014 492 88 284 1.73 0.31

2015 472 56 309 1.53 0.18

13. Revenue generated from consultancy per year

2014-2015:

S.no. Name of the Project Amount

Generated

(Lacs)

1. Geotechnical Investigation for various projects 1.50

2. Road Safety Consultancy Services for four Laning of

Kiratpur Sahib – Nerchowk section of NH-21 from km

73.200 to km 186.500 in the state of Himachal Pradesh for

development, Construction and Post COD operation and

Maintenance phase.

50.00

12

S.no. Name of the Project Amount

Generated

(Lacs)

3. Road Safety Consultancy Services for four Laning of

Jammu-Udhampur Section of NH-1A from km 15.000 to

km 67.000 in the state of Jammu and Kashmir for

development, Construction and Post COD operation and

Maintenance phase.

35.00

4. Design and Vetting of various structures 25.75

5. Structural material testing 4.63

6. Fly ash characteristics testing for BGR Energy Systems Ltd 1.07

7. Investigation into the Fly Ash Conveying System using Pneumatic Handling for Yamunanagar Thermal Power Plant

1.00

8. Design of Effluent Treatment plant, Gillanders-Arbertas, a

kothari group industry, ahmedgaarh

1.00

9. Design analysis and modification of the ETP, Sudson Woolen Ltd., Ludhiana

0.70

10. Development of Kinetics based model for FCC unit 5.5

11. Material balance calculations and ETP Equipment sizing

for M/S ChemCad Laboratories Limited, District- SAS

Nagar, Punjab

1.0

12. Information Security @ Desidoc 9.43

Total 136.58

2013-14

S. No. Name of the Project Amount Generated

(Lacs)

1. Inspection of roads under jurisdiction of Construction Division, Sirhind

0.65

2. Design of Concrete Road from Back Side of Rajindra

Hospital to 23 No Railway Crossing, Patiala.

0.37

3. Design Vetting: -Output and performance based road

contract for improvement, rehabilitation and resurfacing &

routine maintenance works of roads of Sangrur-Mansa-

Bathinda Area. (S1 to S5 World bank Funded Project)

1.60

4. CBR testing of Subgrade & other layers of various Road 1.85

13


(Lacs)

Projects

5. Road Safety Consultant for Four Laning of Kiratpur Sahib – Nerchowk section of NH-21 from km 73.200 to km 186.500 in the state of Himachal Pradesh for development, Construction and Post COD operation and Maintenance phase.

50.00 (for 3 years project)

6. Geotechnical field and laboratory testing 2.80

7. Design and Vetting of various structures 27.63

8. Structural material testing 5.61

Total 90.51

2012-13


(Lacs)

1. Kinetics based FCC Unit Model 5.5

2. Yog Raj Builders (P) Ltd. 0.73

3. Dr.Neelam Bansal # 10-D Gobind Colony, Rajpura

1.27

4. Water and wastewater management studies for Amar Industries Ltd

1.50

5. Water and wastewater management studies for Sanya Fabrics

1.50

6. Water and wastewater management studies for Maharaja Processor

1.25

7. Environmental Feasibility and ETP and APCDs design 1.25

8. Environmental Feasibility and ETP and APCDs design 1.25

9. Appropriateness assessment of the modified guidelines for the management and handling of rice husk in the rice shelling units

0.50

Total 14.75

14. Number of MoUs with international recognized bodies

S.

No Name Activity

1. Secure Net Technologies Set up "centre of excellence " , running various courses on security such as security-5, network-5, ECSS & CEH

2. Wipro Technologies

WIPRO is running various courses to upgrade the overall skills of teachers of engineering institutions as well as the students through two programs named as Wipro mission 10X technology Learning Center (MTLC) and Unified Technology Learning Platform (UTLP). Department has conducted one training program under this relationship.-2013

14

S. No

Name Activity

3. Crompton Greaves Ltd.

One ongoing project -"PREPARATION AND CHARACTERIZATION OF POLYMER/CERAMIC FIBRE AND CELLULOSE COMPOSITE PAPER FOR ELECTRICAL INSULATION“ by Dr Rajeev Mehta One more projects has been started. Project was initiated by Dr. Gangacharyulu. Each year ME/Mtech students are sent to CG for one year project training. This year Six MTech Students are sent for one year project training-June 2013.

4. ISA Group Lille, FRANCE Student Exchange and Faculty Exchange with Biotechnology Department. The activity will co-ordinated by Dr. Abhijit Ganguli. Scholarship for more than 100 students from Indian and French Govt. One faculty had gone Group Lille, France during the summer vacation to deliver a lecture on academic and research exchange programmes at TU Attended two meeting/discussion sessions on environmental Food Biotechnology with Prof. Bertrand, Head Environmental Group. Initiatives on Joint Research Projects in the area of Bio-Process and Green Polymer Application for Remediating Environment. One TU student Mr. Jatin Sharma BTech BT (4th Year) has been selected for Masters in Food Science and Management at ISA. Scholarship will be offered to the student.

5. University of Wollongong Australia

Student Exchange and Faculty Exchange, Joint research

6. TCS PhD Research MoU

TCS is sponsoring selected PhD Candidates for a Maximum of 4 years. Department currently have 3 TCS Research Scholars. A Stipend of Rs. 23,000 per month is given for the First 2 Years and Rs. 25,000 per month for next 2 years by TCS. TCS supports participation of TCS Research Scholar and respective guide in 1 International Refereed Conference, held outside India, and 2 National Conferences in India. TCS awards One-time Rs 1 Lakh Contingency Amount to the Institute for every TCS Research Scholar to meet any incidental expenses. TCS also has a detailed plan for continuing interaction between TCS Research Scholars and TCS Innovation Labs.

7. CISCO Net Academy

A global education initiative from Cisco Systems, offers networking programs, like the (Cisco Certified Network Associate) CCNA and (Cisco Certified Network Professional) CCNP courses, which prepare students for the certification exams

15

S. No

Name Activity

of the same name, and other computer-related courses. 150 students got their modules cleared and attained discounts to appear in CCNA industrial exam.

8. EC-Council, USA

EC-Council Academia is an innovative education initiative that delivers information and security skills to improve career and economic opportunities around the world. It provides online courses, assessment exams, CBT videos and lab activities via iPrep, iVideo, iExam, iLearn and iLabs platform. It also prepares candidates for industry leading EC-Council certifications exams such as CEH, CHFI, ECSA/LPT. 5 students successfully completed C|EH exam and have attained Certified Ethical Hacker Certification from EC-Council USA

9. Microsoft Edvantage Program

Under Microsoft Edvantage program, all Faculty and staff members can use latest legal software provided by Microsoft. The faculty members have the benefit of using all Microsoft products and keys from this website.

10. Oracle Academy

Under this program CSED, received licensing to Oracle Database products on huge discount, also learning material is freely downloadable. Students can appear for Oracle certification at discounted price

11. Apple University Program

CSED started with Course on Mobile Application development which emphasizes app development under android and iOS platform. CSED received free SDK (Software Development Kit) and are part of AUP for uploading apps developed by students after testing done by Appstore.

12. IBM University Program

CSED is part of this program since 2005 and faculty, students have gained knowhow into IBM technologies by attaining certifications and training from IBM free of cost, 10 faculty members and students were trained under this program for Rational Software Architecture (RSA)

13. Infosys Campus Connect Launched by Infosys in May 2004, CC is a unique academia-industry initiative to “architect the education experience”. Goal is to build a sustainable partnership with engineering education institutions in India and abroad for mutual benefit; producing “industry ready” recruits.

• Around 800 students got professional benefits from such training.

• CSED has got critical inputs on Curriculum changes

16

S. No

Name Activity

• Planning to Set up of Centre excellence in thrust areas of CS (initial proposal is being prepared)

14. Naveen Jindal School of

Management, the University of Texas at Dallas, U.S.A and LM Thapar school of management -2013

Faculty and Student exchange, Joint research

15. Association of chartered certified accountants (ACCA)-2013

The purpose of MoU is to have the international certifications from ACCA in finance and management programmes. With these certifications the profile of the students will be enhanced and they will get more acceptability in the market

16. INTEL Intel® Embedded University Program (IEUP) caters to Enhance the Presence Of Intel® Embedded-based Systems Curriculum and to Enable Technology Leaders of Tomorrow an Understanding of Embedded Systems and Provide a Solid Foundation for Designing And Developing new Technologies. This Program supports in Curriculum Development, Student Contests, and Research. It holds an Annual Research and Education Summit giving Professors opportunities to interact with Peers, Intel Architects and Engineers. Following Equipment's were Funded by Intel under this program IXP1200 NP (2), IXP2400 NP (2), IXP425 (2) Kits.

17. University of Twente, Netherlands

To initiate a pilot bachelor student exchange program, establishing a joint research center on Entrepreneurship and Innovation between the Netherlands Institute of Knowledge Intensive Entrepreneurship (Nikos) of the University of Twente and the LM Thapar School of Management of TU.

18. Ritsumeikan University, Japan

Exchange information on research and educational programmes, to jointly organize short-term continuing education programmes, seminars, conferences, or workshops to exchange, on a reciprocal basis, faculty and students for limited periods of time for the purpose of education and /or research.

19. University of Missouri-Kansas City

Joint Research Proposals, • Joint Research Guidance at PG and PhD level, • Joint conduct of workshops on upcoming areas of technology Hybrid International Master of Science in Computer Science Program . Dr Kevin Truman, Dean of the University visited TU in 11th Sept 2013. Visit to University of Missouri-Kansas City is being

17

S. No

Name Activity

planned to further look into the courses.

20. Engg. School of Information and Digital Technology, Paris, (EFREI ) FRANCE.

Student and faculty exchange as well as scholarships and waivers for the students for the Master programme at EFREI.

21. Royal Melbourne Institute of Technology

Mapping of Bachelor Information Technology and Bachelor of Technology (computing Studies) with TU program as 3+1 and 3+2 arrangement * Mapping of MCA programs and development of an agreement in BIT and BT Computing studies) and MCS

22. NVIDIA for CUDA teaching center(CTC) as well as CUDA Research Center (CRC).

NVIDIA is a pioneer in parallel computing architecture using CUDA programming.

- Hardware infrastructure required for the task procured

- - CUDA teaching centre approved for TU

23. University of Florida

Twining Degree programs Joint Research Proposals, • Joint Research Guidance at PG and PhD level, • Faculty Exchange

24. Spoken Tutorial IIT-Bombay and MHRD

Workshops, certifications and training on upcoming technologies

25. ICICI

Trinity is an initiative by ICICI Bank that promotes and furthers the cause of innovation and entrepreneurship amongst the youth community in India.

26. Trinity College Dublin-Ireland

Thapar Institute of Engineering & Technology University Patiala (TUP) and Trinity College Dublin (TCD) have collaborated in areas of mutual interest of both the institutions. The broad scope of this collaboration, would jointly develop a contemporisation program for Thapar Institute of Engineering and Technology University covering broadly the following areas. Academic curriculum review and

development Research Orientation including supporting

lab infrastructure. Pedagogy (including teaching-learning

center) Governance Structure Physical Infrastructure Faculty training and development Develop programs in Humanities and Liberal

Arts etc

15. (a) - Publication per faculty: 553/284=1.95 (2014)

18

(b) -Total Number of publications of the university: 3048 (Source: Scopus

data – See screen shot below)

16. Average impact factor of Publications.

The average Impact factor of Publication for year 2015 is 2.07

19

17. Number of paper with more than 10 citations

A total of 418 publications with Thapar Institute of Engineering and

Technology University affiliation has more than 10 citations as per the data

available on Scopus website. The list will be larger for Google scholar. The list

of these publications is attached at Annexure 3.

18. Number of book titles per student (in the central Library) excluding book

bank.

112049/6500=18.46

Print Books e-Books Total

Total Number of

Titles 53375 2184 55559

Total Number of

Copies 93503 18546 112049

(e-books{(562

X 3*)+(802 X

20*)+(820 X

1*)} *=seat

license ; 20 is

for ‘n’ no. of

licenses.

19. Percentage of annual allocation for library spent on purchase of journals

(national & international) and other library resources (CDs, Cassettes, etc).

Library budget for academic year (2014-15) is Rs 161 Lakhs, which is 2% of

total expenditure, Books= Rs. 75 Lakhs, Journals (Print + Electronic) = Rs. 86

Lakhs.

20. Number of national/international conferences/workshops organized per

department per year and names of experts participated.

Thapar Institute of Engineering and Technology University organized 60

national/international conferences/workshops organized during the last two

years which means on an average more than 2 programs were organized by

each department every year. The list of these events is appended at Annexure

4. The names of the experts participated in the above events will be made

available at the time of site visit.

20

21. Student performance in national/international level examinations

(e.g. ET/SLET/GATE/GMAT/CAT/GRE/TOFEL,CIVIL SERVICES)

Most of our undergraduate get a good placement offer before graduating and

thus sit in such national/international examinations after two to three years of

work experience. The data provided is thus very limited as we are not in

contact with many such students. However, those students who competed in

these examinations immediately after graduation or during their final year of

study in 2014-15 is as under:

EXAM NUMBER OF QUALIFIED STUDEDNTS

NET 2

GATE 45

JRF 2

GRE 21

CAT 4

22. Student teacher ratio (Average across all disciplines)

18:1

23. University has the following i) IQAC ii) Accreditation by national body iii)

international accreditation/ISO certification iv) AAA

YES

(i) IQAC (NAAC Executive Committee No. & Date):- EC_50_RAR_15-

dated30_12_2014_thaparuniversity

(ii) 1st NBA Accreditation-1996, Re-accreditations in 2202, 2008, 2012 and

2014. Has applied for accreditations for many UG/PG programs in

2014 and are awaiting the team visit.

(iii) ISO 9000:2008 certification since year 2000.

(iv) Applied for ABET accreditation of Mechanical Engineering Program

and the visit is scheduled from December 9-11, 2015.

24. Outstanding achievements/ Recognition by faculty/alumni both at national

and international level

The outstanding achievement of faculty and alumni both at national and

international level is provided in Annexure 5.

21

B. Desirable Indicators

25. Outstanding performance of students in sports/cultural activities at national

level.

Our university teams participated and performed admirably at the various

All India tournaments. Some of the participations are as under:

SPORTS ACHIEVEMENT 2014-2015

Our Cricket Men team participated in the Inter University cricket

Tournament held at University of Delhi from 27-31 Oct. 2014.

Our Football Team participated in the Inter University Football

Tournament held at Panjab University Chandigarh from 2-8 Dec. 2014.

Our Lawn Tennis Men Team participated in the Inter University

Tournament held at DCRUST Murthal from 24-29 Oct. 2014.

Our Basketball Men team Participated in the Inter University Tournament

held at PTU Jalandhar from 21-25 Dec. 2014.

Our Table Tennis Men team participated in Inter University Tournament

held at UTU Dehradun from 18-21 Dec. 2014.

Our Shooting Men Team participated in All India Inter University Shooting

Championship held at Punjabi University Patiala from 2-5 January 2015.

SPORTS ACHIEVEMENT 2013-2014

Thapar Institute of Engineering and Technology University Basketball

team (Men) has won the First RannNeeti ‟13 Basketball tournament held

at IIT Mandi (HP) from September 21 to September 22, 2013.

A total of eleven teams from different IIT‟s, NIT‟s and TU had

participated in the competition. Our University team won by beating

the hosts IIT, Mandi.

Thapar Institute of Engineering and Technology University teams of

Chess and Badminton (both men and women) also participated in

Inter-Engineering tournaments held from 4th to 5th October, 2013.All

the teams won as runners up. Organized by the Inter Technology

Universities Sports Association (ITUSA) the badminton tournament

was held at NIT Hamirpur

The Chess, men's team won the gold medal and the women's team

finished runners up. Chess championship was held at PEC

Chandigarh.

The Basketball (Girls) team of Thapar Institute of Engineering and

Technology University created history by winning the First Invitational

22

Basketball Tournament held at Jaypee University, Solan HP. In fact,

this is for the first time that a girls‟ basketball team from our university

has participated in any competition.

Our Lawn Tennis (boys and girls) and TT (boys) teams also won Gold

medals, and TT (girls) and Football (boys) Team returned with Bronze

Medals in the Inter-Engineering tournaments organized by the Inter

technology Universities Sports Association (ITUSA).

The lawn Tennis tournament was organized at Thapar Institute of

Engineering and Technology University Patiala, the Table tennis

tournament was held at NIT Kurkshetra and NIT Jalandhar hosted the

Football competition, from 30th to 31st Oct, 2013.

Our Cricket (Men) team got 2nd position in the Inter Engineering

Cricket Tournament held at PEC Chandigarh from 25-27 April 2014.

26. Feedback received from different stakeholders on syllabi etc

(i) Students

(ii) Alumni

(iii) Parents

(iv) Employers

(v) Peers

Input from all of these stake holders is taken periodically to review and

improve the various dimensions of the program and the syllabi.

Student feedback: Student Response Survey is completed for every course in

each semester to get a formal feedback from students for the courses offered

in a semester and provide objective information to the faculty for self-

appraisal, self-improvement & development. Formal student feedback is

obtained online through semester-by-semester mandatory course evaluation

using course outcome survey form and also through discussions with

individual students as well as student representatives on the Student

Consultative Committee (SCC) and also through meetings with student

societies. The student reaction survey results are used for revision of syllabi.

Faculty feedback: The department faculty members are members of various

academic bodies such as Department Academic Affairs Committee, Board of

Studies, Senate Undergraduate Committee and the Senate. The faculty

provides feedback on academic and curriculum matters as members of these

committees. Faculty members also routinely provide feedback and suggest

improvements to the academic program and suggest changes in syllabi at

23

formally scheduled faculty meetings as well as other discussions forums with

the department head and other meetings convened by the Dean/Director.

Alumni Feedback: Alumni input is solicited through formal and informal

meetings and also during the visits of the faculty to their respective

organizations for assessment of work term students. The Alumni are invited

to the campus for a formal gathering with their families after 15, 25 and 50

years of their graduation. The alumni has previously served on the Board of

the University which is the highest decision making body of the University.

The alumni are invited to participate in various curricular, co-curricular and

extra-curricular activities on the campus and the forum is used as an

opportunity to solicit their feedback. Often, alumni provide inputs for

improvements in the program when they visit the campus for recruitment of

final year students and are keen to contribute back to the place of their

graduation. Such inputs are valued and welcomed.

Industry feedback: The University is backed by a major business group

“Avantha Group” which has diverse businesses covering every discipline of

engineering. Also, several industry representatives serve on the Board of the

University, a group that is the highest decision making body. On many

occasions, feedback flows back to the department regarding the program

especially when the course scheme and syllabi are reported to the Board. The

University has a strong department named „Centre for Industrial Liaison and

Placement‟ that invites several large organizations (over 150 every year) for

student placement and industrial training during the project semester. The

Centre solicits formal feedback from the representatives of these

organizations and passes this information to the department for improvement

in the program.

Besides this, industry representative serve on the Department Board of

Studies (BOS) that frames the scheme of courses and the syllabus for the

courses offered. Also, all faculty members are required to visit organizations

at least twice in each year to one or two organizations for evaluation of

students placed for their work term in these organizations and are required to

collect formal feedback from these organizations. Feedback is reviewed and

used as required during the process of curriculum review or design of new

courses.

Statutory Studies: The External members of the statutory bodies of the

department provides a continuing mechanism for review of our program‟s

directions, weaknesses and accomplishments.

24

27. Percentage of recommendations of the stakeholders implemented

All recommendations from stake holders are formally reviewed and

deliberated upon by the Departmental Academic Affairs Committee(s), the

Board of Studies, Senate UG/PG committee and the Senate. The

recommendations are accepted based on wider discussions amongst these

statutory bodies.

28. Number of interdisciplinary courses combinations introduced during last 5

years as percentage of total programmes.

The interdisciplinary programs started during the last 5 years are as under:

B.E. Mechatronics Engg (Mechanical and Electronics Engineering)

B.E. Electronics & Computers Engg (Electronics Communications &

Computer Science)

B.Tech Bio-Chemical Engineering (Chemical Engg & Bio-technology)

M.Tech Computer Applications (Computer Science & Maths)

M.Tech Environmental Science & Technology (School of Environment

& Civil Engg)

The above five new interdisciplinary programs were started during the last

five years which is 17% of the total number of programs.

29. Percentage of departments conducting tutorial classes

100%, all the departments conduct tutorial classes.

30. Number of courses where continuous assessment of student performance is

structured into the system

100% of the courses has continuous assessment of student performance is

structured into the system.

31. Percentage of faculty availing international fellowship for advance studies.

Ans:

S. No Name of Faculty

Award /Recognition Year

1. M.S. Reddy

Fellow of Biotech Research India 2014

2. Sanjai FABSc (Fellow of Association of 2013

25

Saxena Advancement in Biodiversity Science)

3. Dr. Shekhar Agnihotri

International travel award from Department of Biotechnology (DBT) Govt. of India funding agency

2013

4. Sanjai Saxena

Bharat Jyoti Award, instituted by Indian International Friendship Society (IIFS), 3. on 4th May 2012 by Dr. Bhisham narain Singh, Ex-Governor Tamil Nadu/ Assam; Dr. GVG Krishnamurthy, Ex-Chief Election Commissioner and Maj Ved Pal, Secretary AICC at the Constitution Club of India, Rafi Marg, New Delhi 110001

2012

5. Manju Anand

Was awarded best paper award in International conference on Biotechnology and Food Engineering (ICBFE-2012), ‟ held at Dubai

2012

6. Dinesh Goyal

Awarded Fellowship (FABAP) by Association of Biotechnology and Pharmacy (ABAP) For Achieve- ments in November, 2010.

2010

7. Dinesh Goyal

Elected as the Fellow of International Congress of Chemistry and Environment (FICCE), India in April, 2009

2009

8. A S Jawanda

Commonwealth scholarship for research at University of Waterloo

2010

9. R K Duvedi

Commonwealth scholarship for research at University of Waterloo

2010

32. Percentage of courses/programmes that formally integrate e-learning

resources from National programmed teaching enhanced learning (NPTEL)

digital library retrieval.

Thapar Institute of Engineering and Technology University is amongst top

100 Technology Institutes in Quality Enhancement in Engineering Education

(QEEE) Pilot Programme.

The list of QEEE-Phase-IV live lecture delivered in 1516 ODDSEM (July-Oct

2015)

26

Sr. No. Topic

1 Algebra

2 Space Time Codes, MIMO and Massive MIMO Part 1 - Wireless Communication

3 Electromagnetic Wave

4 Chemical Reaction Engineering

5 Solar DC

6 Compiler Design

7 Program Testing

8 Basics of Design of Machine Elements

9 Engineering Drawing - Machine Drawing

The list of QEEE-Phase-III live lecture delivery in 1415 EVESEM (Jan-May

2015)

Sr. No. Topic

1 Design of shallow foundations - Geotechnical Engineering

2 Shear Strength of Sand and Clays - Soil Mechanics/Geotechnical Engineering

3 Computer Networks

4 ARM Architecture in Embedded Systems

5 Wireless Medium Access - Computer Networks

6 Circuit Analysis Techniques

7 High performance communication networks

8 Frequency domain analysis

9 Convective Heat Transfer - Heat Transfer

The list of QEEE-Phase-II live lecture delivery in 1415ODDSEM (July-NOV

2015)

Sr. No. Courses

1 Mathematics I

2 Physics

3 Digital Signal Processing

4 Machine Design

5 Data Structures & Algorithms

6 Fiber Optic Communications

7 Physics –LAB

Bridge Course Name

1 Spoken English

33. Percentage of annual budget allocated for augmentation of infrastructure

facilities (average of last 3 years)

Ans: Average of last three years: 40.17%

27

2014-15 Rs 1588.09 lac being 13.30%

2013-14 Rs 8516.07 lac being 50.31%

2012-13 Rs 5108.92 lac being 56.92%

34. Total number of class rooms, seminar halls with LCD/OHP etc.

Ans: The class rooms with their seating capacity are as under:

Room description

Usage Shared/ Exclusive

Capacity Rooms Equipped with PC, Internet, Book rack, meeting space etc

E101-E108 Lecture Shared 80 each room

Board, LCD Projector, internet connection

E201, E203 –E207 E209--E212

Lecture shared 60 each Board, internet connection

F101 Lecture shared 80 Board, , internet connection

F102 & F108 Lecture shared 120 each Board, LCD Projector, internet connection

F103 –F106 Lecture shared 80 each Board, LCD Projector, internet connection

F107 Lecture shared 80 each Board, , internet connection

F201 –F205 Lecture shared 80 each Board, LCD Projector, , internet connection

F 206-208 Drawing Hall

shared 36 each Board, LCD Projector

B106 Drawing Hall

shared 60 each Board, LCD Projector, internet connection

B107 Lecture shared 84 each Board, LCD Projector, internet connection







B304 Drawing hall

shared 55 each Board, internet connection

28

Room description

Usage Shared/ Exclusive

Capacity Rooms Equipped with PC, Internet, Book rack, meeting space etc




D115 & D116

lecture shared 100 each Board, LCD Projector, internet connection

D 201-207 lecture shared 100 each Board, LCD Projector, internet connection

T101-104 lecture shared 80 each Board, LCD Projector, internet connection

T105-106 lecture shared 80 each Board


T205 lecture shared 80 each Board


T304 lecture shared 80 each Board

Seminar rooms

C Hall, CILP Hall

shared - Board, LCD Projector, internet connection

Faculty rooms (18 No.)

Department faculty

Exclusive-12 Shared-06

02 in each Internet/ Wi-Fi connection

35. Declaration of results within

The semester results are declared typically within 15 days of the completion

of the end semester examinations.

36. Average pass percentage of students:

95%

37. Student placement percentage average per year

2015 2014 2013

UG 86% 91% 94%

PG 62% 57% 70.4%

38. Percentage of student progression to higher education

29

The data for UG students is not available directly as most of the students do

another degree as a UG degree is not a viable terminal degree anymore.

However, students pursue the higher degree after some years of completing

the UG program and we don‟t have data. In our considered opinion 90%

undergo higher education after UG but after 3 to 5 years of graduating.

Approx 10% of PG students progress for a higher qualification.

39. Average drop-out percentage of students

Academic Year DROP-OUT

1314 8.10%

1415 8.90%

1516 1.30%

40. Unit cost of education (excluding salary)

The unit cost of education (excluding salary) is Rs 0.99 lakh per student in

2014-15

41. Aggregate percentage of seats filled against seats reserved for various

categories as per applicable reservation policy.

Academic Year SEATS FILLED

1314 34.07%

1415 33.27%

1516 26.62%

42. Number of differently abled persons on roll: Teaching/Non

teaching/Students.

The details of the differently abled persons on roll are:-

YEAR TEACHING NON-TEACHING STUDENTS

2013 3 1 Nil

2014 3 1 2

2015 3 1 2

43. Percentage representation of staff (teaching/non teaching) in decision making

bodies.

30

Statutory Bodies Thapar Institute of

Engineering and

Technology University

Staff

Total Members

Percentage

Board of Governors 8 25 32.00%

Building and Works Committee 12 16 75.00%

Finance Committee 5 8 62.50%

Planning and monitoring board 38 43 88.37%

Senate 60 65 92.31%

State Affairs Committee 8 11 72.73%

Total 131 168 77.98%

44. Percentage of autonomous colleges to the total number of colleges.

Not Applicable

45. Percentage of Teacher from other states.

Year Faculty from Punjab Faculty from Outside Total % age

2013 137 120 257 46.69

2014 146 138 284 48.59

2015 159 150 309 48.54

46. Donations received for institution of chairs, endowments, seminars and

lectures.

The grant received/sanctioned under the TEQIP has been used for these

activities. The details are as under:

TEQIP-II

Funds Received

Project amount sanctioned Rs. 12.50 Cr

Amount received in Dec 2012 Rs. 2.00 Cr.

31

Amount received in March 2015 Rs. 0.50 Cr.

TU share to Punjab Govt. in 2012-13 Rs. 0.50 Cr.

TU share to Punjab Govt. in 2013-14 Rs. 0.50 Cr.

Expenditure till date Rs. 8.92 cr.

Details of expenditure:

Activities Category of

expenditure

Expenditure

(INR)

Procurement of goods (equipment, furniture,

books, LRs, software and minor items) and civil

works for improvement in teaching, training and

learning facilities

Procurement

(45%)

Rs.

3,48,58,673

Assistantships Assistantships

(20%)

Rs.

2,48,90,708

Enhancement of R&D and institutional

consultancy activities

R&D (5%) Rs. 37,03,662

Faculty and staff development for improved

competence

FSD (10%) Rs.95,22,420

Enhanced interaction with industry I-I-I Cells (5%) Rs. 13,68,224

Institutional Management Capacity

enhancement

Capacity

development

(2%)

Rs.7,96,047

Implementation of Institutional academic

reforms

Reforms (1%) Rs. 25,06,702

Academic support for weak students Student

support (2%)

Rs. 9,70,439

Incremental operating cost IOC (10%) Rs.

1,06,52,564

TOTAL EXPENDITURE Rs.

32

8,92,69,439

47. Contribution of alumni /parents (average of last 5 years) for development of

university in lakhs.

Year

Total number of

members in the

alumni

association

Financial

Assistance

provided by

total alumni

No. of

placements

through

alumni

Other types

of

Assistance

2015 22000+

merit cum

means

scholarships,

fresher

guides,

sponsorship

in student

festivals,

special

prizes on

convocation

2014 20000+ Rs. 17 Lacs 20-25

2013 18000 +

Rs. 50 lacs (

including Rs. 10

lakhs by 1984-88

batch for

Scholarship)

68

2012

16430

23.84 lacs- by

1983-87 batch

for scholarship

55

2011

15485

15.34 lacs by

1961-65 batch

for scholarship

26

48. Percentage of female students.

Academic Year FEMALE STUDENTS

1314 31.48%

1415 31.00%

1516 31.36%

49. Programme for professional development of staff per year.

Academic Staff Development Programmes

(2013-2014)

Number of Faculty

Refresher Courses 51

HRD Programmes 04

33

Orientation Programmes 21

Staff Training conducted by the university 53

Staff Training conducted by other university 41

Summer/Winter School, workshops, etc. 32

50. Projection of successful innovative practices.

Aspiring to become a globally acclaimed university, we have signed a

comprehensive institutional agreement to CONTEMPORIZE THAPAR

INSTITUTE OF ENGINEERING AND TECHNOLOGY UNIVERSITY with

Trinity College, the University of Dublin. Trinity as it is popularly called is

one of the world‟s oldest universities - over 422 years old and its

cutting‐ edge research, technology and innovation places it at the forefront of

higher education and is consistently ranked amongst the top 100 universities

in the world. The collaboration is a central component of a major

contemporisation programme that Thapar Institute of Engineering and

Technology University has undertaken.

The CONTEMPORARIZATION PROGRAM is envisaged to deliver a

research inspired, outcome based educational experience to the students. The

partnership covers all the major academic and research activities of the

University and will help address and bolster Thapar Institute of Engineering

and Technology University‟s position as a leading centre for higher education

in India and in the region. As a first step, we invited Trinity in November

2014 to conduct an academic review of our programs and governance

procedures. The findings of the review set out a path to achieve a closing of

the performance gap. An overall plan for change was then prepared for

implementing the findings of the academic review. As a first step the

harmonization of curriculum with Trinity was taken up to bring it up to date

with global standards. We have adopted the learning outcomes approach for

teaching with greater reliance on self-directed learning, projects and research-

led teaching.

The agreement will also give students admitted to undergraduate engineering

programs at Thapar Institute of Engineering and Technology University the

opportunity to study at Trinity. Eligible students will pursue the first two

years of their course at Thapar before transferring to Ireland in years 3 and 4

of their program. A cohort of 8 students has been nominated to Trinity on a

scholarship program earlier this year to complete their year 3 and 4. Another

batch of 8 students will also go in 2016 before a larger group of 40 undertakes

this credit transfer program from 2017.

34

To give a major fillip to research, we have sponsored two research

professorships at Trinity. The Professors would spend time both at Thapar

and Trinity and would lead a major research effort which will culminate into

setting up of a State of the Art research centre at Thapar in the next five years.

As part of the contemporisation program, we are also setting up a Centre for

Academic Practice and Student Learning under mentorship of Trinity to

support and help the faculty hone their skills and teaching pedagogy. This

centre will support a whole-institutional approach to teaching and learning

and facilitate a broad adoption of this new learning paradigm. The training

and on-going professional development will be instrumental in establishing

the culture necessary for this initiative to grow and contribute meaningfully

to the contemporisation programme.

We have envisioned improving the laboratory and physical infrastructure on

the campus. A modernization plan for the important teaching and research

laboratories in consultation with Trinity has been developed. We have hired

world class foreign architects to develop key academic infrastructure that

would include new Computer Science block, Library, Lecture hall complex,

student residences and other academic blocks. Face lifting and modernization

of older buildings has also been planned in a major way. Thapar Institute of

Engineering and Technology University has also planned to implement an

international ERP system to manage and govern the academic, financial and

administrative functions.

We have undertaken major examination reforms during the year. In the new

procedure, the question papers are now being reviewed by Trinity. The

examination results will be discussed by an Examination Board which will be

convened to review sample answer scripts, projects and the marks obtained

by the students.

The partnership is now being expanded to collaborate in other areas of

academia and research which includes the programs offered by TU Schools of

Mathematics, Physics, Chemistry and the postgraduate and PhD programs.

Additional academic areas in Arts, Humanities and Social Sciences are also

being scoped.

An Innovation Centre/Venture Lab would be set up at TU to run accelerator

program open to teams of students with an early-stage business idea. The

program will support students in developing investor-ready ventures.

35

Place: Patiala Date: November 28, 2015

For Thapar Institute of Engineering and Technology University, Patiala

(Prof Prakash Gopalan)

DIRECTOR

36

Annexures

37

Annexure 1

List of Sponsored Projects(Infrastructure and Research) completed as on 31.3.2015.

Sr.No. Title of the Project Name of the

Coordinators

Funding

Agency

Sanctioned

Amount (In

Lakhs)

Deptt.

1 Chemical Fixation of carbon

dioxide to polycarbonates and

cyclic carbonates.

Rajeev Mehta AICTE 14.10 CHED

2 Multiresponse optimization of

process parameters for the

improved part accuracy in

fused deposition doeling

process.

Ajay Batish AICTE 9.75 MED

3 Studies on selenium and its

specification in environmental

and biological samples from

seleniferous regional of Punjab.

N.Tejo

Prakash

BRNS 14.09 DBTES

4 Utilization of Fungal treated

waste foundry sand in

concrete.

R.Siddique CSIR 12.26 CED

5 Calcifying bacteria mediated

cementation for energy

efficient building materials.

M.S.Reddy CSIR 15.42 DBTES

6 Preparation and

characterization of

polylectide(PLA)-polyethylene

blends and its degradability

studies.

H.Bhunia CSIR 16.92 CHED

7 Study of size-dependent

multiferroic properties of

doped-BiFeo3 nanostructures

N.K.Verma DAE 22.45 SPMS

8 Rehabilitation of RC bridge

girders with externally pre-

stressed fiber composits vide

No. SR/S3/ MERC- O30/ 2009

Prem Pal

Bansal

DST 29.00 CED

38

9 Development of Indradhanush:

an Intergrated WordNet for

Bengali, Gujrati, Kashmiri,

Konkani, Oriya, Punjabi and

Urdu.

R.K.Sharma MOCIT 17.55 SMCA

10 Satluj Monitering Project A.S.Reddy NRRDA

/ SMP

52.03 DBTES

11 Algorithms fo solving some

fuzzy network flow problems.

Amit Kumar UGC 7.43 SMCA

12 Synthesis and characterization

of multiferroci A Fe2O4-

BiFeO3(A=Co, Ni,Zn)

nanocomposite films

Puneet

Sharma

UGC 7.27 SPMS

13 Performance analysis of dense

wavelenght division

multiplexed systems.

R.S.Kaler UGC 8.09 ECED

14 Synthesis and characterization

of multiferroci A Fe2O4-

BiFeO3(A=Co, Ni,Zn)

nanocomposite films

Puneet

Sharma

UGC 7.27 SPMS

15 Study of erosin wear for the

flow of ash-water slurry.

Satish Kumar UGC 7.49 MED

16 Experimental Investigation for

surface improvement of die

steels during electric discharge

machining with tungsten and

titnium powder mixed

dielectric.

Anirban

Bhattacharya.

UGC 0.90 MED

17 Experimental investigation of

EDM machined surface of Ai-

Sic and AI-Sic-B4C Metal

matrix Composites.

Ajay Batish UGC 10.82 MED

18 Energy Aware Resource

Sheduling for Utility

Computing.

Inderveer

Chana

UGC 11.63 CSED

39

Annexure 2

List of Sponsored Projects(Infrastructure and Research) ongoing as on 31.3.2015

Sr.No. Title of the Project Name of the Coordinators

Funding Agency

Sanctioned Amount ( In

Lakhs )

Deptt.

1 Optimization techniques for design of ultra high performance concrete mixes.

Maneek Kr. AICTE 7.50 CIVIL

2 Application software development to evaluate thermal performance of tube type, air to air heat exchange for CADA high rated electrical motors.

D Gangacharyulu

CGL 13.82 CHED

3 Zirconia supported solic catalyst for simulatneous transesterrication and esterification of high free fatty acid containing triglycerides.

Amjad Ali CSIR 13.53 SCBC

4 Genetic Transformation of selected clones of populus deltoides FOR CELLULOSE ENHANCEMENT IN WOOD.

Anil Kumar CSIR 19.77 DBTES

5 Magnetic Fluid based collant to enhance thermal and dielectric properties of transformer oil.

B.K.Chudasama CSIR 20.25 SPMS

6 Study of surface charge and zeta potential of coinage metal nanoparticles for their optimum stability and catalytic activity.

Bonamali Pal CSIR 15.42 SCBC

7 Heterocyclic Subsituted quinazoline and pyrazolo[3,4-d] pyrimidine derivatives: Scaffold for aurora kinase inhibitors.

Kamaldeep Paul

CSIR 21.92 SCBC

8 OSDD Projec under the CDRI of CSIR

Kamaldeep Paul

CSIR 5.50 SCBC

9 Cluster Decay and Fusion Fission Dynamics at low energies.

Manoj Kr. Sharma

CSIR 9.96 SPMS

10 Development of treatment and regeneration technology for phytoesterogens from wastewater streams.

Moushumi Ghosh.

CSIR 14.92 DBTES/ SEE

11 Design and development of integrated nanophotonic platform based on hybrid photonic plasmonic waveguide for

Mukesh Kumar CSIR 14.92 ECED

40

communication and bio-sensing.

12 Studies on anti-inflammatory responses as function of bioactive selection from selenium-rich cereal grains.

N.Tejo Prakash CSIR 19.92 DBTES

13 Development fo barium hexaferrite (BaFe12019) Thick films for micro/ millimeter wave device applications.

Puneet Sharma CSIR 14.42 SPMS

14 Kinetic and thermodynamics studies on the effect of chaotropiv and kosmotropic cosolvents on horse ferrocytochromec.

Rajesh Kumar CSIR 18.92 SCBC

15 Fungus mediated biodiesel generation from wasted edible oils.

Ranjana Prakash

CSIR 17.02 SCBC

16 Effect of magnetic anisotropy and particle size distribution on the magnetization of antiferromagnetic nio nanoparticles

S.D.Tiwari CSIR 15.92 spms

17 Developing validated scale-up procedure for densephase pneumatic transport of fine powders using two-layer dune-flow model.

S.S.Mallick CSIR 19.47 MED

18 Size and shape dependent photocatalytic activity of TiO2 Nanostructures for selective reduction of nitroaromatics.

Satnam Singh CSIR 10.92 SCBC

19 Size and shape dependent photocatalytic activity of TiO2 Nanostructures for selective reduction of nitroaromatics.

Satnam Singh CSIR 10.92 SCBC

20 Isolation purification and characterization of new fibrinolytic molecules from endophytic fungi for their use as anti-thrombotic agents.

Sanjai Saxena CSIR 14.67 DBTES

21 Influence of isospin degree of freedom on disapperance of directed and elliptical flow in intermediate energy heavy-ion collisions.

Suneel Kumar CSIR 11.82 SPMS

22 Investigation of hydrodynamics and RTD of pulp digester using radiotracer technique.

Avinash Chandra

DAE/ BRNS

21.38 CHED

41

23 Development of non-eco toxic polyolefins with controlled environmental degradation by using high energy radiation and pro-oxidants.

Haripada Bhunia

DAE/ BRNS

19.89 CHED

24 Study of size-dependent multiferroic properties of doped-BiFeo3 nanostructures

N.K.Verma DAE/ BRNS

22.45 SPMS

25 Strain improvement of Aspergillus sp.( RBD01) for enhanced transesterification of waste-cooking and non-edible oils using induced mutation by y irradiation.

Ranjana Prakash

DAE/ BRNS

21.22 SCBC

26 Theoretical study of heavy ion dynamics at superconducting cyclotron(k500scc)energies at VECC

Suneel Kumar DAE/ BRNS

14.58 SPMS

27 Design and Development of Diphenylether based supramolecules for electroanalytical probes.

Susheel Mittal DAE/ BRNS

22.89 SCBC

28 Non-inner and class preserving automorphisms of finite p- groups

Dr.Deepak Kumar

DAE/ NBHM

10.12 SMCA

29 Mechanism and applications fo ionizing radiation in AOP based degradation of persistant pollutants from aqueous streams

Amit Dhir DAE/BRNS 24.83 SEE

30 Cloning and characterization of genes of glutathione biosynthesis in ectomycorrhizal fungi and their role in metal detoxification

M.S.Reddy DBT 12.74 DBTES

31 Immunomodulatory agents from endophytic fungi for breast cancer therapy.

Manoj Baranwal

DBT 16.02 DBTES

32 Neuroprotective properties of selenoergothioneine sourced from selenium-rich mushrooms against oxidative stress and nitrosative damage in neuronal cells.

N.Tejo Prakash DBT 11.86 DBTES

33 Biofortification of selenium in edible mushrooms from se-rich crop residues.

N.Tejo Prakash DBT/ NDB 17.13 DBTES/ SEE

42

34 Alkali metal supported transition metal oxides as catalyst for the transesterification of jatropha and karanja oils.

Amjad Ali DRDO 14.82 SCBC

35 Study of alkaline earth metals substitution in bismuth based mixed ion conductors for solid oxide fuel cells applications.

Kulvir Singh DRDO 14.42 SPMS

36 Development of porous aluminum foam materials for blast mitigation.

O.P.Pandey DRDO 17.24 SPMS

37 Studies on STF- nanoclay based composites for personal armour systems

Rajeev Mehta DRDO 29.71 CHED

38 Nanoengineering of Magnetic carries for drug delivery of anticancer therapeutics.

B.K.Chudasama DST 27.01 SPMS

39 Lateral and longitudinal hydrodynamic dispersion through rigid and flexible vegetation

Dwarikanath Ratha

DST 14.34 CIVIL

40 Synthesis and characterization of high capacity adsorbents for CO2 capture.

Haripada Bhunia

DST 25.34 CHED

41 Structural and electro-optical investigations on lyotropic liquid crysalline materials and their uses as soft template.

K.K.Raina DST 33.06 SPMS

42 Novel scaffolds of Pglycoprotein modulators to overcome multidrug resistance in cancer cells.

Kamaldeep Paul

DST 19.98 SCBC

43 Study of lanthanum doped mixed conductors for solid electrolytes

Kulvir Singh DST 34.50 SPMS

44 Floating wick type vertical multiple effect diffusion solar still waste heat recovery.

Madhup Kumar Mittal

DST 11.22 MED

45 In silico and in vitro approach to identify immunogenic peptides of HINI virus as a target for vaccine design.

Manoj Baranwal

DST 23.60 DBTES

46 Nuclear reaction dynamics and related aspects at low energies(E<15Me V/A)

Manoj Kr. Sharma

DST 12.50 SPMS

47 Green polymers for waterborne pathogen detection and treatment.(DST-International Div.)

Moushumi Ghosh with British counterpart Dr.

DST 23.58 DBTES/ SEE

43

Helen Bridle.

48 Tungsten Carbide Powder from Wolframite Ore.

O.P.Pandey DST 32.73 SPMS

49 Development of photonic crystal biosensor of detection of foodborne pathogens.

R.S.Kaler DST 30.89 ECED

50 Study and development of above elbow prosthetic arm.

Ravinder Agarwal

DST 26.62 USIC

51 Effect of laser photoetching of Au nanostructures of different shapes on the electrokinetic, optical and catalytic properties.

Rupinder Kaur DST 14.28 SCBC

52 The total synthesis fo the antimalarial natural products, flinderoles.

Satyendra K Pandey

DST 22.00 SCBC

53 Medelling Solids Friction and Transport Boundary for fluidised densa-phase pneumatic conveying systems.

S.S.Mallick DST 21.95 MED

54 Transalkylation of di-isopropylbenzene (DIPB) with benzene over modified nano zeolite catalyst: A kinetic study.

Sanghamitra Barman

DST 23.60 CHED

55 The total synthesis fo the antimalarial natural products, flinderoles.

Satyendra K Pandey

DST 22.00 SCBC

56 Detection of corrosion by ultrasonic and acoustic emission techniques.

Shruti Sharma DST 42.00 CIVIL

57 Synthesis of transition metal incorporated mesoporous meterials and their catalytic application for some industrial reactions.

Shweta Sareen DST 16.08 SCBC

58 The quest for the nuclear equation of state in intermediate energy heavy-ion collisions.

Suneel Kumar DST 14.25 SPMS

59 Studies on combustion, performance and emissions characteristics of diesel engine fuelled with biodiesel and biogas.

Sunil Kumar Mahla

DST 19.20 SEE

60 Sequential biological photocatalytic degradation of neonicotenoids in soil.

Teena Sharma DST 21.10 SEE

44

61 Heterocycles based FRET-dyads for chemionic and bioionics.

Vijay Laxmi DST 26.37 SCBC

62 ESIPT based Chromophores Application for sensing and white light emitting devices.

Vijay Laxmi DST 83.00 SCBC

63 Utilization of cement klin dust in concrete after removal of alkalinity and metal toxicity with microbes

R.Siddique DST 27.00 CIVIL

64 FRP stay in place structural formwork for concrete floors under women scientist scheme.

Reema Goyal DST 24.60 CIVIL

65 Durability enhancement and prevention damage in RC structure using bacteria

M.S.Reddy DST/SERB 53.70 DBTES

66 Synthesis of clay supported TiO2 nanoparicles for photocatalytic oxidation of volatile organic compounds (VOCs)

Soumen Basu DST/SERB 24.98 DBTES

67 DST- FIST Program Head MED DST-FIST 43.00 MED

68 FIST Programe on 50:50 Basis (43 lac-DST & 43 lac TU.)

Head SCBC DST-FIST 43.00 SCBC

69 DST- FIST Program Head SPMS DST-FIST 81.50 SPMS

70 Low energy properties of baryon JP=1/2+ Decuplets in phenomenological model

Alka Upadhyay DST-SERB 17.39 SPMS

71 Development of M-type Hexaferrete films for microwave device Application.

Puneet Sharma DST-SERB 47.46 SPMS

72 Association of Single Nucleotide polymorphimsms and Methylation starus in the Wnt and AhR signaling pathways with risk for occurance of Lung cancer in North Indian Population.

Siddhartha Sharma

ICMR 18.93 DBTES

73 Particular matter dose relationship with long function efficiency of children during agriculture crop residue burning episodes.

Susheel Mittal ICMR 21.37 SCBC

74 A Strategic framework for enhancing technology adoption and management strategies for women entrepreneurs in food and beverage sector.

Ravi Kiran ICSSR 5.00 SBSBS

45

75 A Strategic framework for enhancing technology adoption and management strategies for women enterpreneurs in food and beverage sector.

Santha Kumari ICSSR 7.00 SBSBS

76 Fluidized bed catalytic reactor for the degradation of PAH.

Anoop Verma IEI 1.00 DBTES

77 Modelling Atmospheric Pollution and Networking (MAPAN)

Susheel Mittal IITM 20.32 SCBC

78 Gene resources from polluted soils. M.S.Reddy Indo French 33.17 DBTES

79 Projects from Industries Amit Dhir INDS 1.09 SEE

80 Development of prosodically guided phonetic engine for searching speech databases in Indian Languages.

R.K.Sharma MOCIT 30.02 SMCA

81 Development of online handwriting recoginition system for Indian Language ( OHWR).

R.K.Sharma MOCIT-2 60.23 SMCA

82 Processing and characterization of fiber reinforced polymer nanocomposites and their degradation in marine environments.

R.Mehta NRB 21.54 CHED

83 Investigation of corrosion and its progression in ship hulls.

Shruti Sharma NRB 24.64 CIVIL

84 Study regarding qualitative analysis of the sludge accumulated along the bed of Budha Nallah at various locations along with thickness of the sludge above the permeable surface.

P.K.Bajpai PPCB 4.50 CHED

85 Adsorption process for removal of emerging pollutants from drinking water.(Sanctioned in Canada)

P.K.Bajpai as CO PI

Shastri Indo-

Canadian Institute

5.50 CHED

86 TCS Research Scheme Maninder Singh

TCS 13.12 CSED

87 TCS Research Scheme Neeraj Kumar TCS 15.52 CSED

88 TCS Research Scheme Shalini Batra TCS 15.52 CSED

89 Study of heavy-light D and B meson using HQET

Alka Upadhyay UGC 9.91 SPMS

90 Design and development of stacked patch micrstrip antennas for wlan applications.

Amanpreet Kaur

UGC 15.81 ECED

46

91 Influence of bacteria oncompressive strengh and permeability of fly ash concrete.

Anita Rajor UGC 7.58 DBTES

92 Green cloud computing framework for efficient and robust management of resources.

Anju Sharma UGC 12.93 CSED

93 Studies on antimicrobial properties of metal and metal oxide nanostrucut.res

B.K.Chudasama UGC 13.75 SPMS

94 Size and shape dependent photocatalytic activity of silica-coated metal (M)-zinc sulfide (ZnS) nanocomposites for nitroaroatcs reduction.

Bonamali Pal UGC 14.11 SCBC

95 Salary & Research Grant Deepak Kumar UGC 16.76 SMCA

96 Evaluation of resistance properties of coal water slurry flowing through local piping fittings.

Dwarikanath Ratha

UGC 6.44 CIVIL

97 Special Assistance Programme Head CED UGC 36.50 CED

98 Special Assistance Programme- DRS-III

Head CED UGC 73.50 CED

99 PG Diploma under innovative programme- Teaching & Research in interdisciplinary & Emerging Areas during XI plan.

Head DBTES/ M.S.Reddy

UGC 44.00 DBTES

100 Energy Aware Resource Sheduling for Utility Computing.

Inderveer Chana

UGC 11.63 CSED

101 On L1-Convergence of trignomatric series with special coeffcients

Jatinderdeep Kaur

UGC 9.73 SMCA

102 Electrical and opto-electronic investigations of polymer-low molar mass liquid crystal composits for display applications.

K.K.Raina UGC 11.78 SPMS

103 Coupling of substituted quinarzoline/ Xanthine and purine/Pyrimidine/Benzimidazole: A novel scaffold for kinase inhabitors.

Kamaldeep Paul

UGC 11.01 SCBC

104 Synthesis and characterization of diphenyl/ analogues for their antibacterial activity

Manmohan Chhiber

UGC 6.22 SCBC

105 Formation and decay of exotic nuclear systems using energy density formalism

Manoj Kr. Sharma

UGC 12.67 SPMS

47

106 Technological development of biopolymer overproducing variants of acinetobacter implicated in phosphate enrichment in water

Moushumi Ghosh

UGC 7.60 DBTES

107 Algorithms for solving some single and multicriteria decision making prbolems in fuzzy environment.

Mahesh Sharma UGC 7.56 SMCA

108 UGC-BSR Resarch Start-up-Grant for newly recruited faculty at Assistant Professor level in science department.

Neeraj Kumar UGC 6.00 CSED

109 Corrosion resistance behaviour of glass-steel interface.

O.P.Pandey UGC 9.02 SPMS

110 Synthesis of fBiFe03 thin films for device applications.

Poonam Uniyal UGC 13.92 SPMS

111 Synthesis and characterization of multiferroci A Fe2O4-BiFeO3(A=Co, Ni,Zn) nanocomposite films

Puneet Sharma UGC 7.27 SPMS

112 UGC Special Assistance Programme

HECEDRajesh Khanna

UGC 61.00 ECED

113 UGC-BSR to improve basic scientific research in University.

Head Eced/ R.Khanna

UGC 20.00 ECED

114 Ph-Dependent stability and microsecond folding kinetics of horse ferrocytochrome c.

Rajesh Kumar UGC 11.42 SCBC

115 A Strategic Framework for consumer prefernces towards emerging retail formats.

Ravi Kiran UGC 4.80 SOMSS

116 Frame for enabling data portability between heterogeneous cloud storae planforms.

Rinkle Rani UGC 8.59 CSED

117 Application of nanozeolie for the removal of novel contaminants from waste water.

Sanghamitra Barman

UGC 11.72 CHED

118 Ultrasonic guided wave approach for monitoring setting and hardening of concrete.

Shruti Sharma UGC 5.22 CIVIL

119 Service life prediction of RC structures

Shweta Goel UGC 11.17 CED


Soumendu Jana UGC 6.00 SPMS

48


Sudipata Sarkar UGC 6.00 DBTES


Tarun K Bera UGC 6.00 MED

123 Synthesis and characterisation of vanadium carbide nanoparticles.UGC-DAE

O.P.Pandey UGC/DAE 6.02 SPMS

124 Fluid Flow and Heat Transfer, Essential Oil Production and characterization.

Avinash Chandra

UGC-BSR 6.00 CHED

125 Research Start-Up Grant Bhaskar C Mohanty

UGC-BSR 6.00 SPMS

126 Research Start-Up Grant S.K.Pandey UGC-BSR 6.00 SCBC

127 Nanoscience and molecular modelling

Sudhir K Singh UGC-BSR 6.00 CHED

Total 2452.75

49

Annexure 3 – List of publications with more than 10 citations

Sr No Authors Title Year Source title Vol Issue

Page start

Page end

Cited by

1 Ahluwalia, S.S., Goyal, D.

Microbial and plant derived biomass for removal of heavy metals from wastewater 2007 Bioresource Technology 98 12 2243 2257 499

2 Dhillon, J.S., Parti, S.C., Kothari, D.P. Stochastic economic emission load dispatch 1993

Electric Power Systems Research 26 3 179 186 204

3 Jala, S., Goyal, D. Fly ash as a soil ameliorant for improving crop production - A review 2006 Bioresource Technology 97 9 1136 1146 168

4

Mehta, R., Kumar, V., Bhunia, H., Upadhyay, S.N. Synthesis of poly(lactic acid): A review 2005

Journal of Macromolecular Science - Polymer Reviews 45 4 325 349 162

5 Siddique, R., Khatib, J., Kaur, I. Use of recycled plastic in concrete: A review 2008 Waste Management 28 10 1835 1852 150

6 Siddique, R., Klaus, J.

Influence of metakaolin on the properties of mortar and concrete: A review 2009 Applied Clay Science 43

392 400 149

7

Rai, H.S., Bhattacharyya, M.S., Singh, J., Bansal, T.K., Vats, P., Banerjee, U.C.

Removal of dyes from the effluent of textile and dyestuff manufacturing industry: A review of emerging techniques with reference to biological treatment 2005

Critical Reviews in Environmental Science and Technology 35 3 219 238 147

8 Ahluwalia, S.S., Goyal, D.

Removal of heavy metals by waste tea leaves from aqueous solution 2005 Engineering in Life Sciences 5 2 158 162 133

9

Kaur, K., Saini, R., Kumar, A., Luxami, V., Kaur, N., Singh, P., Kumar, S.

Chemodosimeters: An approach for detection and estimation of biologically and medically relevant metal ions, anions and thiols 2012

Coordination Chemistry Reviews 256 17-18 1992 2028 113

10

Singh, V., Kaur, S., Sapehiyia, V., Singh, J., Kad, G.L.

Microwave accelerated preparation of [bmim][HSO4] ionic liquid: An acid catalyst for improved synthesis of coumarins 2005 Catalysis Communications 6 1 57 60 106

11 Kumar, S., Singh, R., Singh, T.P., Sethi,

Surface modification by electrical discharge machining: A review 2009

Journal of Materials Processing Technology 209 8 3675 3687 103

50

B.L.

12 Kaur, S., Singh, V.

Visible light induced sonophotocatalytic degradation of Reactive Red dye 198 using dye sensitized TiO2 2007 Ultrasonics Sonochemistry 14 5 531 537 96

13 Siddique, R. Performance characteristics of high-volume Class F fly ash concrete 2004

Cement and Concrete Research 34 3 487 493 93

14 Mittal, S.K., Kumar, S.K.A., Sharma, H.K.

PVC-based dicyclohexano-18-crown-6 sensor for La(III) ions 2004 Talanta 62 4 801 805 90

15 Singh, R., Kasana, H.S.

Computational aspects of effective thermal conductivity of highly porous metal foams 2004 Applied Thermal Engineering 24 13 1841 1849 80

16 Kumar, S., Kumar, S., Puri, R.K.

Effect of the symmetry energy on nuclear stopping and its relation to the production of light charged fragments 2010

Physical Review C - Nuclear Physics 81 1

74


Elliptical flow and isospin effects in heavy-ion collisions at intermediate energies 2010


73

18 Mehna, A., Bajpai, P., Bajpai, P.K.

Studies on decolorization of effluent from a small pulp mill utilizing agriresidues with Trametes versicolor 1995

Enzyme and Microbial Technology 17 1 18 22 69

19 Kaur, S., Singh, V. TiO2 mediated photocatalytic degradation studies of Reactive Red 198 by UV irradiation 2007

Journal of Hazardous Materials 141 1 230 236 64

20 Siddique, R. Effect of fine aggregate replacement with Class F fly ash on the mechanical properties of concrete 2003

Cement and Concrete Research 33 4 539 547 62

21 Kumar, A., Kaur, J., Singh, P.

A new method for solving fully fuzzy linear programming problems 2011

Applied Mathematical Modelling 35 2 817 823 60

22 Malik, P., Raina, K.K.

Droplet orientation and optical properties of polymer dispersed liquid crystal composite films 2004 Optical Materials 27 3 613 617 59

23 Garg, M.L., Ahson, S.I., Gupta, P.V.

A Fuzzy Petri Net for knowledge representation and reasoning 1991 Information Processing Letters 39 3 165 171 58

24

Lee, M.-H., Singh, H., Lu, G., Bagherzadeh, N., Kurdahi, F.J., Filho,

Design and implementation of the MorphoSys reconfigurable computing processor 2000

Journal of VLSI Signal Processing Systems for Signal, Image, and Video Technology 24 2 147 164 57

51

E.M.C., Alves, V.C.

25

Achal, V., Mukherjee, A., Basu, P.C., Reddy, M.S.

Strain improvement of Sporosarcina pasteurii for enhanced urease and calcite production 2009

Journal of Industrial Microbiology and Biotechnology 36 7 981 988 57

26 Siddique, R. Properties of self-compacting concrete containing class F fly ash 2011 Materials and Design 32 3 1501 1507 57

27

Luthra, S., Kumar, V., Kumar, S., Haleem, A.

Barriers to implement green supply chain management in automobile industry using interpretive structural modeling technique-an Indian perspective 2011

Journal of Industrial Engineering and Management 4 2 231 257 56

28 Puri, M., Marwaha, S.S., Kothari, R.M.

Studies on the applicability of alginate-entrapped naringinase for the debittering of kinnow juice 1996


29

Mittal, S.K., Kumar S.K., A., Gupta, N., Kaur, S., Kumar, S.

8-Hydroxyquinoline based neutral tripodal ionophore as a copper (II) selective electrode and the effect of remote substitutents on electrode properties 2007 Analytica Chimica Acta 585 1 161 170 55

30 Tony, B.D., Goyal, D., Khanna, S.

Decolorization of textile azo dyes by aerobic bacterial consortium 2009

International Biodeterioration and Biodegradation 63 4 462 469 54

31

Sharma, P., Verma, A., Sidhu, R.K., Pandey, O.P.

Process parameter selection for strontium ferrite sintered magnets using Taguchi L9 orthogonal design 2005

Journal of Materials Processing Technology 168 1 147 151 52

32 Saxena, R., Singh, K. Fractional Fourier transform: A novel tool for signal processing 2005

Journal of the Indian Institute of Science 85 1 11 26 49

33 Singh, B., Sharma, M.K., Gupta, R.K.

Decay of Bk246* formed in similar entrance channel reactions of B11+U235 and N14+Th232 at low energies using the dynamical cluster-decay model 2008


48

34 Bhatti, M.S., Reddy, A.S., Thukral, A.K.

Electrocoagulation removal of Cr(VI) from simulated wastewater using response surface methodology 2009

Journal of Hazardous Materials 172 ##### 839 846 48

35 Banerjee, G., Gupta, N., Kapoor,

UV induced bystander signaling leading to apoptosis 2005 Cancer Letters 223 2 275 284 47

52

A., Raman, G.

36

Chudasama, B., Vala, A.K., Andhariya, N., Mehta, R.V., Upadhyay, R.V.

Highly bacterial resistant silver nanoparticles: Synthesis and antibacterial activities 2010

Journal of Nanoparticle Research 12 5 1677 1685 47

37 Tyagi, S., Kumar, N.

A systematic review on clustering and routing techniques based upon LEACH protocol for wireless sensor networks 2013

Journal of Network and Computer Applications 36 2 623 645 47

38

Achal, V., Mukherjee, A., Basu, P.C., Reddy, M.S.

Lactose mother liquor as an alternative nutrient source for microbial concrete production by Sporosarcina pasteurii 2009



Medium mass fragment production due to momentum dependent interactions 2008


44

40

Siddique, R., Schutter, G.d., Noumowe, A.

Effect of used-foundry sand on the mechanical properties of concrete 2009

Construction and Building Materials 23 2 976 980 44

41

Sarkar, S., Guibal, E., Quignard, F., SenGupta, A.K.

Polymer-supported metals and metal oxide nanoparticles: Synthesis, characterization, and applications 2012

Journal of Nanoparticle Research 14 2

43

42

Noumowe, A.N., Siddique, R., Debicki, G.

Permeability of high-performance concrete subjected to elevated temperature (600 °C) 2009


43

Gandhi, N., Singh, K., Ohlan, A., Singh, D.P., Dhawan, S.K.

Thermal, dielectric and microwave absorption properties of polyaniline-CoFe2O4 nanocomposites 2011

Composites Science and Technology 71 15 1754 1760 42

44

Bhatti, M.S., Kapoor, D., Kalia, R.K., Reddy, A.S., Thukral, A.K.

RSM and ANN modeling for electrocoagulation of copper from simulated wastewater: Multi objective optimization using genetic algorithm approach 2011 Desalination 274 ##### 74 80 42

45 Lotey, G.S., Verma, N.K.

Structural, magnetic, and electrical properties of Gd-doped BiFeO 3 nanoparticles with reduced 2012


42

53

particle size

46 Nagarathnamma, R., Bajpai, P.

Decolorization and detoxification of extraction-stage effluent from chlorine bleaching of kraft pulp by Rhizopus oryzae 1999

Applied and Environmental Microbiology 65 3 1078 1082 41

47 Gupta, R.K., Kumar, V., Srivastava, V.K.

A new generic approach for the modeling of fluid catalytic cracking (FCC) riser reactor 2007 Chemical Engineering Science 62 17 4510 4528 41

48 Siddique, R., Noumowe, A.

Utilization of spent foundry sand in controlled low-strength materials and concrete 2008

Resources, Conservation and Recycling 53 ##### 27 35 40

49

Kumar, V., Arora, A., Pandey, O.P., Singh, K.

Studies on thermal and structural properties of glasses as sealants for solid oxide fuel cells 2008

International Journal of Hydrogen Energy 33 1 434 438 40

50

Putzki, N., Baranwal, M.K., Tettenborn, B., Limmroth, V., Kreuzfelder, E.

Effects of natalizumab on circulating B cells, T regulatory cells and natural killer cells 2010 European Neurology 63 5 311 317 39

51 Singh, S., Kaler, R.S.

Flat-gain L-band raman-EDFA hybrid optical amplifier for dense wavelength division multiplexed system 2013

IEEE Photonics Technology Letters 25 3 250 252 39

52 Ahuja, J.K., Raina, K.K.

Polarization switching and dielectric relaxations in ferroelectric liquid crystals 2000

Japanese Journal of Applied Physics, Part 1: Regular Papers and Short Notes and Review Papers 39 ##### 4076 4081 38

53

Pandey, A.K., Reddy, M.S., Suryanarayanan, T.S.

ITS-RFLP and ITS sequence analysis of a foliar endophytic Phyllosticta from different tropical trees 2003 Mycological Research 107 4 439 444 38

54

Achal, V., Mukherjee, A., Reddy, M.S.

Microbial concrete: Way to enhance the durability of building structures 2011

Journal of Materials in Civil Engineering 23 6 730 734 38

55 Singh, V., Sapehiyia, V., Kad, G.L.

Ultrasonically activated oxidation of hydroquinones to quinones catalysed by ceric ammonium nitrate doped on metal exchanged K- 2003 Synthesis

2 198 200 37

54

10 clay

56 Kant, R., Singh, K., Pandey, O.P.

Synthesis and characterization of bismuth vanadate electrolyte material with aluminium doping for SOFC application 2008


57

Bhattacharya, A., Das, S., Majumder, P., Batish, A.

Estimating the effect of cutting parameters on surface finish and power consumption during high speed machining of AISI 1045 steel using Taguchi design and ANOVA 2009 Production Engineering 3 1 31 40 37

58 Chauhan, Y.K., Jain, S.K., Singh, B.

A prospective on voltage regulation of self-excited induction generators for industry applications 2010

IEEE Transactions on Industry Applications 46 2 720 730 36

59

Vidya Lakshmi, C., Kumar, M., Khanna, S.

Biotransformation of chlorpyrifos and bioremediation of contaminated soil 2008


60 Kaur, R., Pal, B.

Size and shape dependent attachments of Au nanostructures to TiO 2 for optimum reactivity of Au-TiO 2 photocatalysis 2012

Journal of Molecular Catalysis A: Chemical 355

39 43 34

61

Singh, B., Sharma, M.K., Gupta, R.K., Greiner, W.

Entrance-channel effects in the dynamical cluster-decay model for the decay of hot and rotating compound nucleus48Cr at eCN* ≈ 60 MeV 2006

International Journal of Modern Physics E 15 3 699 717 33

62 Achal, V., Savant, V.V., Reddy, M.S.

Phosphate solubilization by a wild type strain and UV-induced mutants of Aspergillus tubingensis 2007 Soil Biology and Biochemistry 39 2 695 699 33

63

Cubadda, F., Aureli, F., Ciardullo, S., D'Amato, M., Raggi, A., Acharya, R., Reddy, R.A.V., Prakash, N.T.

Changes in selenium speciation associated with increasing tissue concentrations of selenium in wheat grain 2010

Journal of Agricultural and Food Chemistry 58 4 2295 2301 33

64

Naik, T.R., Chun, Y.-M., Kraus, R.N., Ramme, B.W., Siddique, R.

Precast concrete products using industrial by-products 2004 ACI Materials Journal 101 3 199 206 32

55

65

Kumar, M., Lakshmi, C.V., Khanna, S.

Biodegradation and bioremediation of endosulfan contaminated soil 2008 Bioresource Technology 99 8 3116 3122 32

66

Tarangini, K., Kumar, A., Satpathy, G.R., Sangal, V.K.

Statistical optimization of process parameters for Cr (VI) biosorption onto mixed cultures of Pseudomonas aeruginosa and Bacillus subtilis 2009 Clean - Soil, Air, Water 37 ##### 319 327 32

67 Aggarwal, D., Barna, K.S.

Tissue Culture Propagation of Elite Plant of Aloe vera Linn 2004

Journal of Plant Biochemistry and Biotechnology 13 1 77 79 31

68

Khan, Mohd.K., Kumar, R., Sahoo, P.K.

Flow characteristics of refrigerants flowing through capillary tubes - A review 2009 Applied Thermal Engineering 29 ##### 1426 1439 31

69 Kumar, A., Singh, P., Kaur, P., Kaur, A.

A new approach for ranking of L-R type generalized fuzzy numbers 2011

Expert Systems with Applications 38 9 10906 10910 31

70 Kaur, V., Kumar, S., Puri, R.K.

On the elliptical flow and mass asymmetry of the colliding nuclei 2011

Physics Letters, Section B: Nuclear, Elementary Particle and High-Energy Physics 697 5 512 516 31

71

Kaur, G., Kumar, M., Arora, A., Pandey, O.P., Singh, K.

Influence of Y2O3 on structural and optical properties of SiO2-BaO-ZnO-xB2O3-(10-x) Y 2O3 glasses and glass ceramics 2011

Journal of Non-Crystalline Solids 357 3 858 863 31

72

Sharma, S.C., Kumar, V., Jain, S.C., Nagaraju, T.

Study of hole-entry hybrid journal bearing system considering combined influence of thermal and elastic effects 2003 Tribology International 36 12 903 920 30

73


Influence of Nd3+ and Sm3+ substitution on the magnetic properties of strontium ferrite sintered magnets 2003

Journal of Alloys and Compounds 361 ##### 257 264 30

74

Mehta, R., Anderson, D.P., Hager, J.W.

Graphitic open-celled carbon foams: Processing and characterization 2003 Carbon 41 11 2174 2176 30

75

Mittal, S.K., Sharma, H.K., Kumar, A.S.K.

Samarium (III) selective membrane sensor based on tin (IV) boratophosphate 2004 Sensors 4 8 125 135 30

56

76

Vidya Lakshmi, C., Kumar, M., Khanna, S.

Biodegradation of chlorpyrifos in soil by enriched cultures 2009 Current Microbiology 58 1 35 38 30

77

Gadve, S., Mukherjee, A., Malhotra, S.N.

Corrosion of steel reinforcements embedded in FRP wrapped concrete 2009


78 Singh, D., Vinod, K., Saxena, S.C.

Sampling frequency of the RR interval time series for spectral analysis of heart rate variability 2004

Journal of Medical Engineering and Technology 28 6 263 272 29

79 Sharma, A., Sharda, H.B., Nath, Y.

Stability and vibration of thick laminated composite sector plates 2005

Journal of Sound and Vibration 287 ##### 1 23 29

80 Khurana, H.K., Kanawjia, S.K. Recent trends in development of fermented milks 2007

Current Nutrition and Food Science 3 1 91 108 29

81

Arora, A., Shaaban, E.R., Singh, K., Pandey, O.P.

Non-isothermal crystallization kinetics of ZnO-BaO-B2O3-SiO2 glass 2008

Journal of Non-Crystalline Solids 354 33 3944 3951 29

82 Mutreja, V., Singh, S., Ali, A.

Biodiesel from mutton fat using KOH impregnated MgO as heterogeneous catalysts 2011 Renewable Energy 36 8 2253 2258 29

83 Kaur, M., Kumar, R., Sharma, M.K.

Systematic study of the decay of 118 122Ba * formed in 78 ,82Kr-induced reactions at E lab = 5.5 MeV/nucleon 2012


29

84 Ram, B., Bajpai, P.K., Parwana, H.K.

Kinetics of chrome-tannery effluent treatment by the activated-sludge system 1999 Process Biochemistry 35 ##### 255 265 28


Transmission performance of 20 × 10 Gb/s WDM signals using cascaded optimized SOAs with OOK and DPSK modulation formats 2006 Optics Communications 266 1 100 110 28

86 Jindal, Z., Verma, N.K.

Photoluminescent properties of ZnS:Mn nanoparticles with in-built surfactant 2008 Journal of Materials Science 43 19 6539 6545 28

87 Cai, L., Li, X., Ghosh, M., Guo, B.

Stability analysis of an HIV/AIDS epidemic model with treatment 2009

Journal of Computational and Applied Mathematics 229 1 313 323 28

88 Kumar, S., Singh, K., Gupta, R.K.

Coupled Higgs field equation and Hamiltonian amplitude equation: Lie classical approach and (G'/G)-expansion method 2012 Pramana - Journal of Physics 79 1 41 60 28

57

89 Sandhu, K., Sharma, M.K., Gupta, R.K.

Fusion-evaporation residue as a dynamical decay process in the 48Ca + 249Bk → 297117 * reaction 2012


28

90 Luxami, V., Kumar, S.

ESIPT based dual fluorescent sensor and concentration dependent reconfigurable boolean operators 2012 RSC Advances 2 23 8734 8740 28

91

Ebadi, G., Yousefzadeh Fard, N., Bhrawy, A.H., Kumar, S., Triki, H., Yildirim, A., Biswas, A.

Solitons and other solutions to the (3+1)-dimensional extended kadomtsev-petviashvili equation with power law nonlinearity 2013 Romanian Reports in Physics 65 1 27 62 28

92 Banwait, S.S., Chandrawat, H.N.

Study of thermal boundary conditions for a plain journal bearing 1998 Tribology International 31 6 289 296 27

93 Singh, V., Sapehiyia, V., Kad, G.L.

Ultrasound and microwave activated preparation of ZrO2-pillared clay composite: Catalytic activity for selective, solventless acylation of 1,n-diols 2004

Journal of Molecular Catalysis A: Chemical 210 ##### 119 124 27

94 Siddique, R. Utilization of cement kiln dust (CKD) in cement mortar and concrete-an overview 2006

Resources, Conservation and Recycling 48 4 315 338 27

95 Singh, H., Reddy, M.S.

Effect of inoculation with phosphate solubilizing fungus on growth and nutrient uptake of wheat and maize plants fertilized with rock phosphate in alkaline soils 2011

European Journal of Soil Biology 47 1 30 34 27

96

Jain, D., Kumar, R., Sharma, M.K., Gupta, R.K.

Skyrme forces and the fusion-fission dynamics of the 132Sn+64Ni→ 196Pt * reaction 2012


27

97 Grover, I.S., Singh, S., Pal, B.

The preparation, surface structure, zeta potential, surface charge density and photocatalytic activity of TiO2 nanostructures of different shapes 2013 Applied Surface Science 280

366 372 27

98

Gupta, P., Lal, A.K., Sharma, R.K., Singh, J.

Numerical analysis of reliability and availability of the serial processes in butter-oil processing plant 2005

International Journal of Quality and Reliability Management 22 3 303 316 26

99 Kaur, M., Ali, A. Lithium ion impregnated calcium oxide as nano catalyst for the biodiesel production from karanja 2011 Renewable Energy 36 11 2866 2871 26

58

and jatropha oils

100

Sharma, M.K., Sawhney, G., Gupta, R.K., Greiner, W.

The decay of the compound nucleus 215Fr* formed in the 11B+204Pb and 18O+197Au reaction channels using the dynamical cluster-decay model 2011

Journal of Physics G: Nuclear and Particle Physics 38 10

26

101

Sharma, M.K., Kanwar, S., Sawhney, G., Gupta, R.K., Greiner, W.

Fusion excitation functions of 64Ni+112-132Sn reactions studied on the dynamical cluster-decay model 2011

Journal of Physics G: Nuclear and Particle Physics 38 5

26

102

Sharma, M., Jain, T., Singh, S., Pandey, O.P.

Photocatalytic degradation of organic dyes under UV-Visible light using capped ZnS nanoparticles 2012 Solar Energy 86 1 626 633 26

103 Paul, K., Bindal, S., Luxami, V.

Synthesis of new conjugated coumarin-benzimidazole hybrids and their anticancer activity 2013

Bioorganic and Medicinal Chemistry Letters 23 12 3667 3672 26

104 Singh, S.B., Ray, S.

Steady-state creep behavior in an isotropic functionally graded material rotating disc of Al-SiC composite 2001

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 32 7 1679 1685 25

105

Bhatti, H.S., Sharma, R., Verma, N.K., Kumar, N., Vadera, S.R., Manzoor, K. Lifetime shortening in doped ZnS nanophosphors 2006

Journal of Physics D: Applied Physics 39 9 1754 1760 25

106 Yüksel, S., Siddique, R., Özkan, O.

Influence of high temperature on the properties of concretes made with industrial by-products as fine aggregate replacement 2011


107

Kaur, G., Pandey, O.P., Singh, K., Homa, D., Scott, B., Pickrell, G.

A review of bioactive glasses: Their structure, properties, fabrication and apatite formation 2014

Journal of Biomedical Materials Research - Part A 102 1 254 274 25

59

108

Raina, K.K., Gathania, A.K., Singh, B.

Effects of dichroic dye on the dielectric properties of ferroelectric liquid crystal mixture 1999

Journal of Physics Condensed Matter 11 37 7061 7069 24

109 Singh, S., Prakash, V.

Toxic environmental releases from medical waste incineration: a review. 2007

Environmental monitoring and assessment 132 ##### 67 81 24

110 Singh, K., Gupta, N., Pandey, O.P.

Effect of Y2O3 on the crystallization behavior of SiO2-MgO-B2O3-Al2O3 glasses 2007 Journal of Materials Science 42 15 6426 6432 24

111

Ghosh, M., Wahi, S., Kumar, M., Ganguli, A.

Prevalence of enterotoxigenic Staphylococcus aureus and Shigella spp. in some raw street vended Indian foods 2007

International Journal of Environmental Health Research 17 2 151 156 24

112

Rudra Shalini, G., Shivhare, U.S., Basu, S.

Thermal inactivation kinetics of peroxidase in mint leaves 2008 Journal of Food Engineering 85 1 147 153 24

113

Mittal, S.K., Singh, N., Agarwal, R., Awasthi, A., Gupta, P.K.

Ambient air quality during wheat and rice crop stubble burning episodes in Patiala 2009 Atmospheric Environment 43 2 238 244 24

114

Kumar, V., Sharma, S., Pandey, O.P., Singh, K.

Thermal and physical properties of 30SrO-40SiO2-20B2O3-10A2 O3 (A = La, Y, Al) glasses and their chemical reaction with bismuth vanadate for SOFC 2010 Solid State Ionics 181 ##### 79 85 24

115

Awasthi, A., Agarwal, R., Mittal, S.K., Singh, N., Singh, K., Gupta, P.K.

Study of size and mass distribution of particulate matter due to crop residue burning with seasonal variation in rural area of Punjab, India 2011

Journal of Environmental Monitoring 13 4 1073 1081 24

116

Luxami, V., Verma, M., Rani, R., Paul, K., Kumar, S.

FRET-based ratiometric detection of Hg2+ and biothiols using naphthalimide-rhodamine dyads 2012

Organic and Biomolecular Chemistry 10 40 8076 8081 24

117 Gulati, T.R., Ahmad, I.

Second order symmetric duality for nonlinear minimax mixed integer programs 1997

European Journal of Operational Research 101 1 122 129 23

118 Singh, D., Vinod, K., Saxena, S.C.,

Effects of RR segment duration on HRV spectrum estimation 2004 Physiological Measurement 25 3 721 735 23

60

Deepak, K.K.


Simulation of DWDM signals using optimum span scheme with cascaded optimized semiconductor optical amplifiers 2007 Optik 118 2 74 82 23

120 Cai, L., Guo, S., Li, X., Ghosh, M.

Global dynamics of a dengue epidemic mathematical model 2009 Chaos, Solitons and Fractals 42 4 2297 2304 23

121

Kanwar, S., Sharma, M.K., Singh, B., Gupta, R.K., Greiner, W.

Decay of 202Pb* formed in 48Ca+ 154Sm reaction using the dynamical cluster-decay model 2009

International Journal of Modern Physics E 18 7 1453 1467 23

122 Sandhu, A.K., Singh, S., Pandey, O.P.

Neutron irradiation effects on optical and structural properties of silicate glasses 2009

Materials Chemistry and Physics 115 ##### 783 788 23

123 Kumar, A., Singh, K., Pandey, O.P.

Reduction of WO3 to nano-WC by thermo-chemical reaction route 2009

Physica E: Low-Dimensional Systems and Nanostructures 41 4 677 684 23

124 Sharma, M., Kumar, S., Pandey, O.P.

Study of energy transfer from capping agents to intrinsic vacancies/defects in passivated ZnS nanoparticles 2010


125 Kumar, D., Ali, A.

Nanocrystalline lithium ion impregnated calcium oxide as heterogeneous catalyst for transesterification of high moisture containing cotton seed oil 2010 Energy and Fuels 24 3 2091 2097 23

126 Singh, K., Gupta, R.K., Kumar, S.

Benjamin-Bona-Mahony (BBM) equation with variable coefficients: Similarity reductions and Painlevé analysis 2011

Applied Mathematics and Computation 217 16 7021 7027 23


Nanocrystalline K-CaO for the transesterification of a variety of feedstocks: Structure, kinetics and catalytic properties 2012 Biomass and Bioenergy 46

459 468 23

128

Krishnan, E.V., Kumar, S., Biswas, A.

Solitons and other nonlinear waves of the Boussinesq equation 2012 Nonlinear Dynamics 70 2 1213 1221 23

129 Kaur, A., Kumar, A.

A new approach for solving fuzzy transportation problems using generalized trapezoidal fuzzy numbers 2012

Applied Soft Computing Journal 12 3 1201 1213 23

61

130

Kumar, N., Chilamkurti, N., Rodrigues, J.J.P.C.

Learning Automata-based Opportunistic Data Aggregation and Forwarding scheme for alert generation in Vehicular Ad Hoc Networks 2014 Computer Communications 39

22 32 23

131

Gathania, A.K., Singh, B., Raina, K.K.

Dielectric relaxations in a room temperature ferroelectric liquid crystal mixture 1999

Journal of Physics Condensed Matter 11 19 3813 3822 22

132 Krishna, P., Reddy, M.S., Patnaik, S.K.

Aspergillus tubingensis reduces the pH of the bauxite residue (red mud) amended soils 2005 Water, Air, and Soil Pollution 167 ##### 201 209 22

133 Garg, A.K., Kaler, R.S.

Novel optical burst switching architecture for high speed networks 2008 Chinese Optics Letters 6 11 807 811 22

134 Siddique, R. Utilization of waste materials and by-products in producing controlled low-strength materials 2009


135

Arun, S.K., Gupta, R.K., Kanwar, S., Singh, B., Sharma, M.K.

Cluster radioactivity with effects of deformations and orientations of nuclei included 2009


22

136 Siddiquea, R., Kaur, G., Rajor, A.

Waste foundry sand and its leachate characteristics 2010


137


Biocalcification by Sporosarcina pasteurii using corn steep liquor as the nutrient source 2010 Industrial Biotechnology 6 3 170 174 22

138

Bera, R.K., Sahoo, S.K., Mittal, S.K., Ashok Kumar, K.S.

An imidazol based novel potentiometric PVC membrane sensor for aluminium(III) determination 2010

International Journal of Electrochemical Science 5 1 29 38 22

139

Bhatti, M.S., Reddy, A.S., Kalia, R.K., Thukral, A.K.

Modeling and optimization of voltage and treatment time for electrocoagulation removal of hexavalent chromium 2011 Desalination 269 ##### 157 162 22

140

Ragit, S.S., Mohapatra, S.K., Kundu, K., Gill, P.

Optimization of neem methyl ester from transesterification process and fuel characterization as a diesel substitute 2011 Biomass and Bioenergy 35 3 1138 1144 22

141 Gupta, S., Chauhan, R.C., Saxena, S.C.

Robust non-homomorphic approach for speckle reduction in medical ultrasound images 2005

Medical and Biological Engineering and Computing 43 2 189 195 21

62

142

Singh, D., Vinod, K., Saxena, S.C., Deepak, K.K.

Spectral evaluation of aging effects on blood pressure and heart rate variations in healthy subjects 2006


143

Reddy, S.M., Hitchin, S., Melayah, D., Pandey, A.K., Raffier, C., Henderson, J., Marmeisse, R., Gay, G.

The auxin-inducible GH3 homologue Pp-GH3.16 is downregulated in Pinus pinaster root systems on ectomycorrhizal symbiosis establishment 2006 New Phytologist 170 2 391 400 21

144

Arun, S.K., Gupta, R.K., Singh, B., Kanwar, S., Sharma, M.K.

Pb208-daughter cluster radioactivity and the deformations and orientations of nuclei 2009


21

145 Ghosh, M., Pathak, S., Ganguli, A.

Effective removal of Cryptosporidium by a novel bioflocculant 2009 Water Environment Research 81 2 160 164 21

146 Sharma, S., Mukherjee, A.

Longitudinal guided waves for monitoring chloride corrosion in reinforcing bars in concrete 2010 Structural Health Monitoring 9 6 555 567 21

147

Sheetal, A., Sharma, A.K., Kaler, R.S.

Simulation of high capacity 40 Gb/s long haul DWDM system using different modulation formats and dispersion compensation schemes in the presence of Kerr's effect 2010 Optik 121 8 739 749 21

148 Kaur, A., Kumar, A. A new method for solving fuzzy transportation problems using ranking function 2011


149 Siddique, R. Utilization of silica fume in concrete: Review of hardened properties 2011


150


Effect of calcifying bacteria on permeation properties of concrete structures 2011


151

Siddique, R., Aggarwal, P., Aggarwal, Y.

Influence of water/powder ratio on strength properties of self-compacting concrete containing coal fly ash and bottom ash 2012

Construction and Building Materials 29

73 81 21

63

152 Kumar, S., Singh, K., Gupta, R.K.

Painlevé analysis, Lie symmetries and exact solutions for (2+1)-dimensional variable coefficients Broer-Kaup equations 2012

Communications in Nonlinear Science and Numerical Simulation 17 4 1529 1541 21

153 Kumar, A., Kumar, V., Kumar, J.

Multi-response optimization of process parameters based on response surface methodology for pure titanium using WEDM process 2013

International Journal of Advanced Manufacturing Technology 68 ##### 2645 2668 21

154 Dua, A., Kumar, N., Bawa, S.

A systematic review on routing protocols for Vehicular Ad Hoc Networks 2014 Vehicular Communications 1 1 33 52 21

155 Agarwall, B.D., Giare, G.S.

Fracture toughness of short fibre composites in modes II and III 1981

Engineering Fracture Mechanics 15 ##### 219

225,227-230 20

156 Singh, S.P., Jain, S.K., Sharma, J.

Voltage regulation optimization of compensated self-excited induction generator with dynamic load 2004

IEEE Transactions on Energy Conversion 19 4 724 732 20

157

Kumar, V., Saxena, S.C., Giri, V.K., Singh, D.

Improved modified AZTEC technique for ECG data compression: Effect of length of parabolic filter on reconstructed signal 2005

Computers and Electrical Engineering 31 ##### 334 344 20

158

Randhawa, R., Singh, S., Sohal, J.S., Kaler, R.S.

Wavelength converter using semiconductor optical amplifier Mach-Zehnder interferometer based on XPM at 40 Gb/s for future transport networks 2009 Fiber and Integrated Optics 28 2 154 169 20

159

Singh, G., Bhunia, H., Rajor, A., Jana, R.N., Choudhary, V.

Mechanical properties and morphology of polylactide, linear low-density polyethylene, and their blends 2010

Journal of Applied Polymer Science 118 1 496 502 20

160 Neeraj, Raina, K.K.

Influence of silica nanoparticles on dielectric spectroscopy and polarization switching responses of novel ferroelectric liquid crystals 2010 Phase Transitions 83 8 615 626 20

161 Singh, S., Prakash, C., Raina, K.K.

Microstructure and electron properties of Sm modified lead calcium titanate ceramics 2010


162

Siddique, R., Aggarwal, Y., Aggarwal, P., Kadri, E.-H., Bennacer, R.

Strength, durability, and micro-structural properties of concrete made with used-foundry sand (UFS) 2011


64

163 Ahmad, Z., Kothyari, U.C.

Time-line cubic spline interpolation scheme for solution of advection equation 2001 Computers and Fluids 30 6 737 752 19

164 Kumar, A., Mittal, S.K.

PVC based dibenzo-18-crown-6 electrode for Ca(II) ions 2004

Sensors and Actuators, B: Chemical 99 ##### 340 343 19

165

Yadav, V., Sharma, N., Prakash, R., Raina, K.K., Bharadwaj, L.M., Prakash, N.T.

Generation of selenium containing nano-structures by soil bacterium, Pseudomonas aeruginosa 2008 Biotechnology 7 2 299 304 19

166 Singh, K., Bala, I., Kumar, V.

Structural, optical and bioactive properties of calcium borosilicate glasses 2009 Ceramics International 35 8 3401 3406 19

167 Ghosh, M., Ganguli, A., Pathak, S.

Application of a novel biopolymer for removal of Salmonella from poultry wastewater 2009 Environmental Technology 30 4 337 344 19

168 Ryait, H.S., Arora, A.S., Agarwal, R.

Interpretations of wrist/grip operations from SEMG signals at different locations on arm 2010

IEEE Transactions on Biomedical Circuits and Systems 4 2 101 111 19

169

Kumar, P., Singh, S., Spah, M., Juneja, J.K., Prakash, C., Raina, K.K.

Synthesis and dielectric properties of substituted barium titanate ceramics 2010

Journal of Alloys and Compounds 489 1 59 63 19

170 Babu, A.G., Reddy, M.S.

Dual inoculation of arbuscular mycorrhizal and phosphate solubilizing fungi contributes in sustainable maintenance of plant health in fly ash ponds 2011 Water, Air, and Soil Pollution 219 ##### 3 10 19

171

Andhariya, N., Chudasama, B., Mehta, R.V., Upadhyay, R.V.

Biodegradable thermoresponsive polymeric magnetic nanoparticles: A new drug delivery platform for doxorubicin 2011


172

Singh, G., Kumar, N., Kumar Verma, A. Ant colony algorithms in MANETs: A review 2012

Journal of Network and Computer Applications 35 6 1964 1972 19

173 Kaur, G., Pandey, O.P., Singh, K.

Interfacial study between high temperature SiO2-B 2O3-AO-La2O3 (A = Sr, Ba) glass seals and 2012


65

Crofer 22APU for solid oxide fuel cell applications

174 Dhami, N.K., Reddy, M.S., Mukherjee, A.

Improvement in strength properties of ash bricks by bacterial calcite 2012 Ecological Engineering 39

31 35 19

175 Singh, H., Paul, D.K., Sastry, V.V.

Inelastic dynamic response of reinforced concrete infilled frames 1998 Computers and Structures 69 6 685 693 18


Minimization of cross-gain saturation in wavelength division multiplexing by optimizing differential gain in semiconductor optical amplifiers 2006 Fiber and Integrated Optics 25 4 287 303 18

177 Singh, S., Kaler, R.S. All optical wavelength converters based on cross phase modulation in SOA-MZI configuration 2007 Optik 118 8 390 394 18

178

Gupta, N.R., Mittal, S., Kumar, S., Ashok Kumar, S.K.

Potentiometric studies of N,N′ -Bis(2-dimethylaminoethyl)-N,N′ -dimethyl-9,10 anthracenedimethanamine as a chemical sensing material for Zn(II) ions 2008

Materials Science and Engineering C 28 7 1025 1030 18

179 Garg, A.K., Kaler, R.S.

Performance analysis of an integrated scheme in optical burst switching high-speed networks 2008 Chinese Optics Letters 6 4 244 247 18

180

Sharma, N., Prakash, R., Srivastava, A., Sadana, U.S., Acharya, R., Prakash, N.T., Reddy, A.V.R.

Profile of selenium in soil and crops in seleniferous area of Punjab, India by neutron activation analysis 2009

Journal of Radioanalytical and Nuclear Chemistry 281 1 59 62 18

181

Ramesh, G., Podila, G.K., Gay, G., Marmeisse, R., Reddy, M.S.

Different patterns of regulation for the copper and cadmium Metallothioneins of the ectomycorrhizal fungus Hebeloma cylindrosporum 2009

Applied and Environmental Microbiology 75 8 2266 2274 18

182 Pareek, N., Sharma, M.L., Arora, M.K.

Impact of seismic factors on landslide susceptibility zonation: A case study in part of Indian Himalayas 2010 Landslides 7 2 191 201 18

183 Siddique, R., Khatib, J.M.

Abrasion resistance and mechanical properties of high-volume fly ash concrete 2010

Materials and Structures/Materiaux et 43 5 709 718 18

66

Constructions

184 Bhatia, K.S., Kamal, T.S., Kaler, R.S.

An adaptive compensation scheme-based coded direct detection optical-orthogonal frequency division multiplex (OFDM) system 2012

Computers and Electrical Engineering 38 6 1573 1578 18


Effect of modifiers field strength on optical, structural and mechanical properties of lanthanum borosilicate glasses 2012

Journal of Non-Crystalline Solids 358 18-19 2589 2596 18


Investigation of hybrid optical amplifiers for dense wavelength division multiplexed system with reduced spacings at higher bit rates 2012 Fiber and Integrated Optics 31 3 208 220 18

187 Jiwari, R., Pandit, S., Mittal, R.C.

Numerical simulation of two-dimensional sine-Gordon solitons by differential quadrature method 2012

Computer Physics Communications 183 3 600 616 18

188

Chahal, N., Siddique, R., Rajor, A.

Influence of bacteria on the compressive strength, water absorption and rapid chloride permeability of fly ash concrete 2012


189

Bhatia, K.S., Kaler, R.S., Kamal, T.S., Randhawa, R.

Simulative analysis of integrated DWDM and MIMO-OFDM system with OADM 2013 Optik 124 2 117 121 18

190 Singh, S., Kaler, R.S. Novel optical flat-gain hybrid amplifier for dense wavelength division multiplexed system 2014

IEEE Photonics Technology Letters 26 2 173 176 18

191

Charyulu, D.G., Singh, G., Sharma, J.K.

Performance evaluation of a radiator in a diesel engine - a case study 1999 Applied Thermal Engineering 19 6 625 639 17

192

Gupta, V.K., Singh, S.B., Chandrawat, H.N., Ray, S.

Creep behavior of a rotating functionally graded composite disc operating under thermal gradient 2004

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 35 A 4 1381 1391 17

193 Gupta, S., Chauhan, R.C., Saxena, S.C.

Homomorphic wavelet thresholding technique for denoising medical ultrasound images 2005


194


Effect of processing parameters on the magnetic properties of strontium ferrite sintered magnets using Taguchi orthogonal array design 2006

Journal of Magnetism and Magnetic Materials 307 1 157 164 17

67

195

Pandey, H., Nandi, S.K., Kumar, A., Palni, U.T., Palni, L.M.S.

Podophyllotoxin content in Podophyllum hexandrum Royle plants of known age of seed origin and grown at a lower altitude 2007 Acta Physiologiae Plantarum 29 2 121 126 17

196

Relwani, L., Krishna, P., Sudhakara Reddy, M.

Effect of carbon and nitrogen sources on phosphate solubilization by a wild-type strain and UV-induced mutants of Aspergillus tubingensis 2008 Current Microbiology 57 5 401 406 17

197 Dey, S., Sarkar, A. Characteristics of submerged jets in evolving scour hole downstream of an Apron 2008

Journal of Engineering Mechanics 134 11 927 936 17

198

Arora, A., Goel, A., Shaaban, E.R., Singh, K., Pandey, O.P., Ferreira, J.M.F.

Crystallization kinetics of BaO-ZnO-Al2O3-B2O3-SiO2 glass 2008 Physica B: Condensed Matter 403 ##### 1738 1746 17

199 Li, X.-Z., Li, W.-S., Ghosh, M.

Stability and bifurcation of an SIR epidemic model with nonlinear incidence and treatment 2009


200

Karn, S.K., Chakrabarty, S.K., Sudhakara Reddy, M.

Characterization of pentachlorophenol degrading Bacillus strains from secondary pulp-and-paper-industry sludge 2010


201 Siddique, R. Utilization of coal combustion by-products in sustainable construction materials 2010


202

Aggarwal, D., Kumar, A., Reddy, M.S.

Shoot organogenesis in elite clones of Eucalyptus tereticornis 2010

Plant Cell, Tissue and Organ Culture 102 1 45 52 17

203 Li, X.-Z., Wang, J., Ghosh, M.

Stability and bifurcation of an SIVS epidemic model with treatment and age of vaccination 2010


204 Sharma, S., Mukherjee, A.

Monitoring corrosion in oxide and chloride environments using ultrasonic guided waves 2011

Journal of Materials in Civil Engineering 23 2 207 211 17

205

Khorasaninejad, M., Abedzadeh, N., Singh Jawanda, A., Nixon, O.,

Bunching characteristics of silicon nanowire arrays 2012 Journal of Applied Physics 111 4

17

68

Anantram, M.P., Singh Saini, S.

206

Marwaha, S.S., Puri, M., Bhullar, M.K., Kothari, R.M.

Optimization of parameters for hydrolysis of limonin for debittering of kinnow mandarin juice by Rhodococcus fascians 1994


207

Manupriya, Thind, K.S., Sharma, G., Rajendran, V., Singh, K., Devi, A.V.G., Aravindan, S.

Structural and acoustic investigations of calcium borate glasses 2006

Physica Status Solidi (A) Applications and Materials Science 203 10 2356 2364 16


Wide-band optical wavelength converter based on four-wave mixing using optimized semiconductor optical amplifier 2006 Fiber and Integrated Optics 25 3 213 230 16

209 Jain, A., Saxena, R., Saxena, S.C.

An improved and simplified design of cosine-modulated pseudo-QMF filterbanks 2006

Digital Signal Processing: A Review Journal 16 3 225 232 16

210

Kumar, R., Singh, S.P., Chandrawat, H.N.

MIMO adaptive vibration control of smart structures with quickly varying parameters: Neural networks vs classical control approach 2007

Journal of Sound and Vibration 307 ##### 639 661 16

211 Kanwar, V., Kwatra, N., Aggarwal, P.

Damage detection for framed RCC buildings using ANN modeling 2007

International Journal of Damage Mechanics 16 4 457 472 16

212 Gulati, T.R., Gupta, S.K., Ahmad, I.

Second-order symmetric duality with cone constraints 2008

Journal of Computational and Applied Mathematics 220 ##### 347 354 16

213 Sandhu, A.K., Singh, S., Pandey, O.P.

Gamma ray induced modifications of quaternary silicate glasses 2008

Journal of Physics D: Applied Physics 41 16

16

214 Pandey, A., Verma, P., Pandey, O.P.

Comparison of properties of silver-tin oxide electrical contact materials through different processing routes 2008

Indian Journal of Engineering and Materials Sciences 15 3 236 240 16

215

Manupriya, Thind, K.S., Singh, K., Kumar, V., Sharma, G., Singh, D.P., Singh, D.

Compositional dependence of in-vitro bioactivity in sodium calcium borate glasses 2009

Journal of Physics and Chemistry of Solids 70 8 1137 1141 16

69

216

Kumar, S., Singh, R., Singh, T.P., Sethi, B.L.

Comparison of material transfer in electrical discharge machining of AISI H13 die steel 2009

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 223 7 1733 1740 16

217

Mittal, S.K., Kumar, P., Ashok Kumar, S.K., Lindoy, L.F.

A comparative study of linked 2, 2'-dipyridylamine ligand system as an ion selective electrode for Ag (I) ions 2010

International Journal of Electrochemical Science 5 12 1984 1995 16


Optimization of processing parameters for the synthesis of tungsten carbide (WC) nanoparticles through solvo thermal route 2010


219 Sharma, M., Singh, S., Pandey, O.P.

Excitation induced tunable emission in biocompatible chitosan capped ZnS nanophosphors 2010 Journal of Applied Physics 107 10

16

220

Deka, D., Bhargavi, P., Sharma, A., Goyal, D., Jawed, M., Goyal, A.

Enhancement of cellulase activity from a new strain of bacillus subtilis by medium optimization and analysis with various cellulosic substrates 2011 Enzyme Research 2011 1

16

221

Kumar, S., Jindal, Z., Kumari, N., Verma, N.K.

Solvothermally synthesized europium-doped CdS nanorods: Applications as phosphors 2011


222

Singh Bhatia, E.K., Kamal, T.S., Kaler, R.S.

Peak-to-average power ratio reduction using coded signal in optical-orthogonal frequency division multiplexing systems 2012 IET Optoelectronics 6 5 250 254 16

223 Jiwari, R. A Haar wavelet quasilinearization approach for numerical simulation of Burgers' equation 2012

Computer Physics Communications 183 11 2413 2423 16

224 Sangal, V.K., Kumar, V., Mishra, I.M.

Optimization of structural and operational variables for the energy efficiency of a divided wall distillation column 2012

Computers and Chemical Engineering 40

33 40 16

225

Rameshraja, D., Srivastava, V.C., Kushwaha, J.P., Mall, I.D.

Quinoline adsorption onto granular activated carbon and bagasse fly ash 2012 Chemical Engineering Journal

181-182

343 351 16

226 Rattan, D., Bhatia, Software clone detection: A systematic review 2013 Information and Software 55 7 1165 1199 16

70

R., Singh, M. Technology


Multiferroic properties of Tb-doped BiFeO3 nanowires 2013


16

228

Mallick, S.S., Mishra, A., Kundan, L.

An investigation into modelling thermal conductivity for alumina-water nanofluids 2013 Powder Technology 233

234 244 16

229 Kaur, P.D., Chana, I. Cloud based intelligent system for delivering health care as a service 2014

Computer Methods and Programs in Biomedicine 113 1 346 359 16

230

Bali, R.S., Kumar, N., Rodrigues, J.J.P.C.

Clustering in vehicular ad hoc networks: Taxonomy, challenges and solutions 2014 Vehicular Communications 1 3 134 152 16

231 Dhillon, J.S., Parti, S.C., Kothari, D.P. Multiobjective optimal thermal power dispatch 1994

International Journal of Electrical Power and Energy Systems 16 6 383 389 15

232 Raina, K.K., Ahuja, J.K.

Dielectric relaxations in a short pitch ferroelectric liquid crystal 1998

Molecular Crystals and Liquid Crystals Science and Technology Section A: Molecular Crystals and Liquid Crystals 325

157 171 15

233 Krishna, P., Arora, A., Reddy, M.S.

An alkaliphilic and xylanolytic strain of actinomycetes Kocuria sp. RM1 isolated from extremely alkaline bauxite residue sites 2008

World Journal of Microbiology and Biotechnology 24 12 3079 3085 15

234

Oberoi, J.S., Khamba, J.S., Sushil, Kiran, R.

An empirical examination of advanced manufacturing technology and sourcing practices in developing manufacturing flexibilities 2008

International Journal of Services and Operations Management 4 6 652 671 15

235

Bhondekar, A.P., Dhiman, M., Sharma, A., Bhakta, A., Ganguli, A., Bari, S.S., Vig, R., Kapur, P., Singla, M.L.

A novel iTongue for Indian black tea discrimination 2010

Sensors and Actuators, B: Chemical 148 2 601 609 15

236 Kaur, K., Pandey, O.P.

Dry sliding wear behavior of zircon sand reinforced Al-Si alloy 2010 Tribology Letters 38 3 377 387 15

71

237

Shukla, R.K., Raina, K.K., Hamplová, V., Kašpar, M., Bubnov, A.

Dielectric behaviour of the composite system: Multiwall carbon nanotubes dispersed in ferroelectric liquid crystal 2011 Phase Transitions 84 09-Oct 850 857 15

238 Singla, R., Ganguli, A., Ghosh, M.

An effective combined treatment using malic acid and ozone inhibits Shigella spp. on sprouts 2011 Food Control 22 7 1032 1039 15

239

Chudasama, B., Vala, A.K., Andhariya, N., Upadhyay, R.V., Mehta, R.V.

Antifungal activity of multifunctional Fe3O4Ag nanocolloids 2011

Journal of Magnetism and Magnetic Materials 323 10 1233 1237 15

240

Karn, S.K., Chakrabarti, S.K., Reddy, M.S.

Degradation of pentachlorophenol by Kocuria sp. CL2 isolated from secondary sludge of pulp and paper mill 2011 Biodegradation 22 1 63 69 15

241 Kaur, R., Singh, S., Pandey, O.P.

FTIR structural investigation of gamma irradiated BaO-Na 2O-B 2O 3-SiO 2 glasses 2012 Physica B: Condensed Matter 407 24 4765 4769 15

242 Singh, G., Siddique, R.

Abrasion resistance and strength properties of concrete containing waste foundry sand (WFS) 2012


243 Gupta, N., Pal, B.

The synthesis, structure, optical and photocatalytic properties of silica-coated cadmium sulfide nanocomposites of different shapes 2012

Journal of Colloid and Interface Science 368 1 250 256 15

244

Bhatia, P., Aureli, F., D'Amato, M., Prakash, R., Cameotra, S.S., Nagaraja, T.P., Cubadda, F.

Selenium bioaccessibility and speciation in biofortified Pleurotus mushrooms grown on selenium-rich agricultural residues 2013 Food Chemistry 140 ##### 225 230 15


Phase-dependent multiferroism in Dy-doped BiFeO3 nanowires 2013

Superlattices and Microstructures 53 1 184 194 15

246 Bansal, P.K., Joshi, R.C., Singh, K.

On a fault-tolerant multistage interconnection network 1994


247 Sharma, A., Sharda, Stability and vibration of mindlin sector plates: An 2005 AIAA Journal 43 5 1109 1116 14

72

H.B., Nath, Y. analytical approach

248

Toor, A.P., Verma, A., Jotshi, C.K., Bajpai, P.K., Singh, V.

Photocatalytic degradation of 3,4-dichlorophenol using TiO2 in a shallow pond slurry reactor 2005

Indian Journal of Chemical Technology 12 1 75 81 14

249 Saxena, S., Gomber, C. Antimicrobial potential of Callistemon rigidus 2006 Pharmaceutical Biology 44 3 194 201 14

250

Nadeem, M., Palni, L.M.S., Kumar, A., Nandi, S.K.

Podophyllotoxin content, above- and belowground biomass in relation to altitude in Podophyllum hexandrum populations from Kumaun region of the Indian Central Himalaya 2007 Planta Medica 73 4 388 391 14

251

Prakash, N.T., Sharma, N., Prakash, R., Raina, K.K., Fellowes, J., Pearce, C.I., Lloyd, J.R., Pattrick, R.A.D.

Aerobic microbial manufacture of nanoscale selenium: Exploiting nature's bio-nanomineralization potential 2009 Biotechnology Letters 31 12 1857 1862 14

252

Kumar, P., Singh, S., Juneja, J.K., Prakash, C., Raina, K.K.

Ferroelectric properties of substituted barium titanate ceramics 2009 Physica B: Condensed Matter 404 ##### 1752 1756 14

253 Siddique, R. Use of municipal solid waste ash in concrete 2010 Resources, Conservation and Recycling 55 2 83 91 14

254

Karn, S.K., Chakrabarty, S.K., Reddy, M.S.

Pentachlorophenol degradation by Pseudomonas stutzeri CL7 in the secondary sludge of pulp and paper mill 2010

Journal of Environmental Sciences 22 10 1608 1612 14

255 Kumar, S., Kumar, S.

Systematic study on system size dependence of global stopping: Role of momentum-dependent interactions and symmetry energy 2010 Chinese Physics Letters 27 6

14

256 Bajpai, P.K. Solving the problems of recycled fiber processing with enzymes 2010 BioResources 5 2 1311 1325 14

257 Ahmad, I., Gupta, S.K., Kailey, N.,

Duality in nondifferentiable minimax fractional programming with B-(p, r)-invexity 2011

Journal of Inequalities and Applications 2011

14

73

Agarwal, R.P.

258 Kumar, R., Sharma, M.K., Gupta, R.K.

Fusion reaction cross-sections using the Wong model within Skyrme energy density based semiclassical extended Thomas Fermi approach 2011 Nuclear Physics A

870-871 1 42 57 14

259 Gupta, R.K., Singh, K.

Symmetry analysis and some exact solutions of cylindrically symmetric null fields in general relativity 2011


260 Siddique, R., Chahal, N.K. Effect of ureolytic bacteria on concrete properties 2011



Fabrication and characterization of Cu-CdSe-Cu nanowire heterojunctions 2011


262 Siddique, R., Singh, G.

Utilization of waste foundry sand (WFS) in concrete manufacturing 2011


263

Singla, M.L., Sehrawat, R., Rana, N., Singh, K.

Dielectric behaviour of emeraldine base polymer-ZnO nanocomposite film in the low to medium frequency 2011


264

Singh, G., Bhunia, H., Rajor, A., Choudhary, V.

Thermal properties and degradation characteristics of polylactide, linear low density polyethylene, and their blends 2011 Polymer Bulletin 66 7 939 953 14

265 Bhatia, K.S., Kaler, R.S., Kamal, T.S. Design and simulation of optical-OFDM systems 2012

Journal of Russian Laser Research 33 5 483 489 14

266 Siddique, R. Utilization of wood ash in concrete manufacturing 2012

Resources, Conservation and Recycling 67

27 33 14

267 Kaur, G., Sharma, M.K.

Compound and non-compound nucleus contributions in the evaporation residue cross-sections of 20Ne + 181Ta → 201Bi * reaction at E c.m.=135MeV and 162 MeV 2012 Nuclear Physics A

884-885

36 50 14

268 Kumar, S., Verma, N.K., Singla, M.L.

Size dependent reflective properties of TiO2 nanoparticles and reflectors made thereof 2012

Digest Journal of Nanomaterials and Biostructures 7 2 607 619 14

269 Pathak, N., Siddique, R.

Properties of self-compacting-concrete containing fly ash subjected to elevated 2012


274 280 14

74

temperatures

270 Kunal, P., Siddique, R., Rajor, A.

Use of cement kiln dust in cement concrete and its leachate characteristics 2012


59 68 14

271

Batish, A., Bhattacharya, A., Singla, V.K., Singh, G.

Study of material transfer mechanism in die steels using powder mixed electric discharge machining 2012

Materials and Manufacturing Processes 27 4 449 456 14

272 Uniyal, P., Yadav, K.L.

Enhanced magnetoelectric properties in Bi0.95Ho 0.05FeO3 polycrystalline ceramics 2012

Journal of Alloys and Compounds 511 1 149 153 14

273

Malik, P., Chaudhary, A., Mehra, R., Raina, K.K.

Electro-optic, thermo-optic and dielectric responses of multiwalled carbon nanotube doped ferroelectric liquid crystal thin films 2012 Journal of Molecular Liquids 165

7 11 14

274 Kumar, N., Kim, J. ELACCA: Efficient learning automata based cell clustering algorithm for wireless sensor networks 2013

Wireless Personal Communications 73 4 1495 1512 14

275 Singh, M., Siddique, R.

Effect of coal bottom ash as partial replacement of sand on properties of concrete 2013


20 32 14

276

Mahata, P., Draznieks, C.-M., Roy, P., Natarajan, S.

Solid state and solution mediated multistep sequential transformations in metal-organic coordination networks 2013 Crystal Growth and Design 13 1 155 168 14

277

He, D., Kumar, N., Chilamkurti, N., Lee, J.-H.

Lightweight ECC Based RFID Authentication Integrated with an ID Verifier Transfer Protocol 2014 Journal of Medical Systems 38 10

14

278

He, D., Kumar, N., Lee, J.-H., Sherratt, R.

Enhanced three-factor security protocol for consumer USB mass storage devices 2014

IEEE Transactions on Consumer Electronics 60 1 30 37 14

279 Trivedi, A., Sud, V.K. Grain characteristics and engineering properties of coal ash 2002 Granular Matter 4 3 93 101 13

280 Saxena, S.C., Kumar, V., Giri, V.K. Telecardiology for effective healthcare services 2003


281 Jain, A., Saxena, R., A simple alias-free QMF system with near-perfect 2005 Journal of the Indian Institute 85 1 1 10 13

75

Saxena, S.C. reconstruction of Science

282

Rana, V., Babita, K., Goyal, D., Tiwary, A.K.

Sodium citrate cross-linked chitosan films: Optimization as substitute for human/rat/rabbit epidermal sheets 2005

Journal of Pharmacy and Pharmaceutical Sciences 8 1 10 17 13

283 Sharma, A., Nath, Y., Sharda, H.B.

Nonlinear transient analysis of moderately thick laminated composite sector plates 2007


284

Kumar, J., Khamba, J.S., Mohapatra, S.K.

An investigation into the machining characteristics of titanium using ultrasonic machining 2008

International Journal of Machining and Machinability of Materials 3 ##### 143 161 13

285

Aggarwal, P., Siddique, R., Aggarwal, Y., Gupta, S.M.

Self-compacting concrete - Procedure for mix design 2008

Leonardo Electronic Journal of Practices and Technologies 7 12 15 24 13

286 Ryait, H.S., Arora, A.S., Agarwal, R.

Study of issues in the development of surface EMG controlled human hand 2009

Journal of Materials Science: Materials in Medicine 20

SUPPL. 1 S107 S114 13

287 Gulati, T.R., Gupta, S.K.

Higher-order symmetric duality with cone constraints 2009 Applied Mathematics Letters 22 5 776 781 13

288 Kant, R., Singh, K., Pandey, O.P.

Structural and ionic conductive properties of Bi4V2-xTixO11-δ (0 ≤ x ≤ 0.4) compound 2009

Materials Science and Engineering B: Solid-State Materials for Advanced Technology 158 ##### 63 68 13

289

Malhotra, J., Sharma, A.K., Kaler, R.S.

On the performance analysis of wireless receiver using generalized-gamma fading model 2009

Annales des Telecommunications/Annals of Telecommunications 64 ##### 147 153 13

290 Malik, P., Raina, K.K., Gathania, A.K.

Effects of polymer viscosity on the polymerization switching and electro-optical properties of unaligned liquid crystal/UV curable polymer composites 2010 Thin Solid Films 519 3 1047 1051 13

291 Siddique, R. Utilization of municipal solid waste (MSW) ash in cement and mortar 2010


292 Khan, M.I., Siddique, R.

Utilization of silica fume in concrete: Review of durability properties 2011


30 35 13

76

293

Kadri, E.-H., Kenai, S., Ezziane, K., Siddique, R., De Schutter, G.

Influence of metakaolin and silica fume on the heat of hydration and compressive strength development of mortar 2011 Applied Clay Science 53 4 704 708 13

294

Sawhney, G., Sharma, M.K., Gupta, R.K.

Role of higher-multipole deformations in exotic C14 cluster radioactivity 2011


13

295 Kanwal, H.K., Reddy, M.S.

Effect of carbon, nitrogen sources and inducers on ligninolytic enzyme production by Morchella crassipes 2011

World Journal of Microbiology and Biotechnology 27 3 687 691 13

296

Sharma, S.K., Bhunia, H., Bajpai, P.K.

Photocatalytic Decolorization Kinetics and Mineralization of Reactive Black 5 Aqueous Solution by UV/TiO2 Nanoparticles 2012 Clean - Soil, Air, Water 40 11 1290 1296 13

297 Singh, J., Verma, N.K.

Synthesis and characterization of fe-doped CdSe nanoparticles as dilute magnetic semiconductor 2012

Journal of Superconductivity and Novel Magnetism 25 7 2425 2430 13

298

Aureli, F., Ouerdane, L., Bierla, K., Szpunar, J., Prakash, N.T., Cubadda, F.

Identification of selenosugars and other low-molecular weight selenium metabolites in high-selenium cereal crops 2012 Metallomics 4 9 968 978 13

299

Sharma, M.K., Kanwar, S., Sawhney, G., Gupta, R.K.

Decay of the 213 ,217Fr * systems formed in 19F + 194 ,198Pt reactions at E c.m.=80-94 MeV 2012


13

300 Jiwari, R., Pandit, S., Mittal, R.C.

A differential quadrature algorithm to solve the two dimensional linear hyperbolic telegraph equation with Dirichlet and Neumann boundary conditions 2012


301

Chaudhary, A., Malik, P., Mehra, R., Raina, K.K.

Electro-optic and dielectric studies of silica nanoparticle doped ferroelectric liquid crystal in SmC* phase 2012 Phase Transitions 85 3 244 254 13

302 Kaur, G., Kumar, V., Pandey, O.P., Singh,

Thermodynamic stability of yttrium alkaline earth borosilicate glasses and their compatibility with 2012

Journal of the Electrochemical Society 159 3 B277 B284 13

77

K. Crofer for SOFC


Chemical interaction study between lanthanum based different alkaline earth glass sealants with Crofer 22 APU for solid oxide fuel cell applications 2012


304

Kumar, N., Chilamkurti, N., Park, J.H.

ALCA: Agent learning-based clustering algorithm in vehicular ad hoc networks 2013

Personal and Ubiquitous Computing 17 8 1683 1692 13

305

He, D., Kumar, N., Khan, M.K., Lee, J.-H.

Anonymous two-factor authentication for consumer roaming service in global mobility networks 2013

IEEE Transactions on Consumer Electronics 59 4 811 817 13

306 Kumar, S., Panwar, R.S., Pandey, O.P.

Effect of dual reinforced ceramic particles on high temperature tribological properties of aluminum composites 2013 Ceramics International 39 6 6333 6342 13


Transesterification of low-quality triglycerides over a Zn/CaO heterogeneous catalyst: Kinetics and reusability studies 2013 Energy and Fuels 27 7 3758 3768 13

308

Salas, A., Kumar, S., Yildirim, A., Biswas, A.

Cnoidal waves, solitary waves and painleve analysis of the 5th order KDV equation with dual-power law nonlinearity 2013

Proceedings of the Romanian Academy Series A - Mathematics Physics Technical Sciences Information Science 14 1 28 34 13

309 Siddique, R., Mehta, A.

Effect of carbon nanotubes on properties of cement mortars 2014


116 129 13

310 Kumar, N., Chilamkurti, N.

Collaborative trust aware intelligent intrusion detection in VANETs 2014


311 Giare, G.S. Fracture toughness of unidirectional fibre reinforced composites in MODE II 1984

Engineering Fracture Mechanics 20 1 11 21 12

312

Singh, G., Kothari, R.M., Sharma, R.K., Ramamurthy, V.

Enhancement of Spirulina biomass productivity by a protein hydrolysate 1995

Applied Biochemistry and Biotechnology 50 3 285 290 12

313

Reddy, S.M., Pandey, A.K., Melayah, D., Marmeisse, R., Gay,

The auxin responsive gene Pp-C61 is up-regulated in Pinus pinaster roots following inoculation with ectomycorrhizal fungi 2003 Plant, Cell and Environment 26 5 681 691 12

78

G.

314 Khosla, S., Raina, K.K.

Dielectric relaxation spectroscopy of guest-host ferroelectric liquid crystals: Influence of anthraquinone dye 2004

Journal of Physics and Chemistry of Solids 65 6 1165 1175 12

315

Singh, D., Vinod, K., Saxena, S.C., Deepak, K.K.

An improved windowing technique for heart rate variability power spectrum estimation 2005


316

Kumar, R., Singh, S.P., Chandrawat, H.N.

Adaptive vibration control of smart structures: A comparative study 2006

Smart Materials and Structures 15 5 1358 1369 12

317

Kaur, R., Verma, N.K., Kumar, S., Chakarvarti, S.K.

Fabrication of copper microcylinders in polycarbonate membranes and their characterization 2006 Journal of Materials Science 41 12 3723 3728 12

318 Kumar, V., Sharma, S.C., Jain, S.C.

On the restrictor design parameter of hybrid journal bearing for optimum rotordynamic coefficients 2006 Tribology International 39 4 356 368 12

319 Gupta, K., Raina, K.K., Sinha, S.K.

Influence of process parameters and alloy composition on structural, magnetic and electrical characteristics of Ni-Fe permalloys 2007


320

Mittal, S.K., Kumar, A.S.K., Kaur, S., Kumar, S.

Potentiometric performance of 2-aminothiophenol based dipodal ionophore as a silver sensing material 2007

Sensors and Actuators, B: Chemical 121 2 386 395 12

321 Sharma, A., Bawa, S.

Comparative analysis of resource discovery approaches in grid computing 2008 Journal of Computers 3 5 60 64 12

322 Sharma, I., Goyal, D.

Kinetic modeling: Chromium(III) removal from aqueous solution by microbial waste biomass 2009

Journal of Scientific and Industrial Research 68 7 640 646 12

323

Kumar, J., Khamba, J.S., Mohapatra, S.K.

Investigating and modeling tool-wear rate in the ultrasonic machining of titanium 2009


324 Parkash, D., Khanna, R.

Design and development of CPW-fed microstrip antenna for WLAN/WiMAX applications 2010

Progress In Electromagnetics Research C 17

17 27 12

325 Aneja, R.K., Biosorption of Pb 2+ and Zn 2+ by Non-Living 2010 Indian Journal of Microbiology 50 4 438 442 12

79

Chaudhary, G., Ahluwalia, S.S., Goyal, D.

Biomass of Spirulina sp.

326 Kumar, S., Rajni, Kumar, S.

Experimental balance energies and isospin-dependent nucleon-nucleon cross-sections 2010


12

327

Ragit, S.S., Mohapatra, S.K., Kundu, K.

Performance and emission evaluation of a diesel engine fueled with methyl ester of neem oil and filtered neem oil 2010

Journal of Scientific and Industrial Research 69 1 62 66 12

328

Kumar, P., Neeraj, Kang, S.-W., Lee, S.H., Raina, K.K.

Analysis of dichroic dye-doped polymer-dispersed liquid crystal materials for display devices 2011 Thin Solid Films 520 1 457 463 12

329

Sivamaruthi, B.S., Ganguli, A., Kumar, M., Bhaviya, S., Pandian, S.K., Balamurugan, K.

Caenorhabditis elegans as a model for studying Cronobacter sakazakii ATCC BAA-894 pathogenesis 2011 Journal of Basic Microbiology 51 5 540 549 12

330

Aggarwal, D., Kumar, A., Reddy, M.S.

Agrobacterium tumefaciens mediated genetic transformation of selected elite clone(s) of Eucalyptus tereticornis 2011 Acta Physiologiae Plantarum 33 5 1603 1611 12

331 Kaur, V., Kumar, S., Puri, R.K.

On nuclear stopping in asymmetric colliding nuclei 2011 Nuclear Physics A 861 1 37 46 12

332 Sharma, N., Dhir, R., Verma, R.C.

Decays of bottom mesons emitting tensor mesons in the final state using the Isgur-Scora-Grinstein-Wise II model 2011

Physical Review D - Particles, Fields, Gravitation and Cosmology 83 1

12

333 Ali, A., Kaur, M., Mehra, U.

Use of immobilized Pseudomonas sp. as whole cell catalyst for the transesterification of used cotton seed oil 2011 Journal of Oleo Science 60 1 7 10 12

334 Narang, N., Dhillon, J.S., Kothari, D.P.

Multiobjective fixed head hydrothermal scheduling using integrated predator-prey optimization and Powell search method 2012 Energy 47 1 237 252 12

335

Kumar, S., Sharma, V., Panwar, R.S., Pandey, O.P.

Wear behavior of dual particle size (DPS) zircon sand reinforced aluminum alloy 2012 Tribology Letters 47 2 231 251 12

80

336

Bhattacharya, A., Batish, A., Singh, G., Singla, V.K.

Optimal parameter settings for rough and finish machining of die steels in powder-mixed EDM 2012


337 Singla, R., Mehta, R.

Preparation and Characterization of Polylactic Acid-Based Biodegradable Blends Processed Under Microwave Radiation 2012

Polymer - Plastics Technology and Engineering 51 10 1014 1017 12

338

Das, S.P., Ravindran, R., Ahmed, S., Das, D., Goyal, D., Fontes, C.M.G.A., Goyal, A.

Bioethanol production involving recombinant C. thermocellum hydrolytic hemicellulase and fermentative microbes 2012

Applied Biochemistry and Biotechnology 167 6 1475 1488 12

339 Jain, A., Kumar, S., Puri, R.K.

Influence of charge asymmetry and isospin-dependent cross section on elliptical flow 2012


12

340 Bhattacharya, A., Batish, A., Singh, G.

Optimization of powder mixed electric discharge machining using dummy treated experimental design with analytic hierarchy process 2012

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 226 1 103 116 12

341 Singh, G., Siddique, R.

Effect of waste foundry sand (WFS) as partial replacement of sand on the strength, ultrasonic pulse velocity and permeability of concrete 2012


342 Siddique, R., Kaur, D.

Properties of concrete containing ground granulated blast furnace slag (GGBFS) at elevated temperatures 2012 Journal of Advanced Research 3 1 45 51 12

343 Bansal, P.K., Singh, K., Joshi, R.C.

Routing and path length algorithm for a cost-effective four-tree multistage interconnection network 1992

International Journal of Electronics 73 1 107 115 11

344

Raina, K.K., Gathania, A.K., Singh, B.

Observation of relaxation modes in room temperature ferroelectric liquid crystal mixtures 1999 Pramana - Journal of Physics 52 4 443 451 11

345 Rajor, A., Singh, R., Mathur, R.P.

Colour removal of distillery waste by saccharomyces 2002

Indian Journal of Environmental Protection 22 11 1241 1252 11

346 Rana, V., Babita, K., Goyal, D., Gorea, R.,

Optimization of chitosan films as a substitute for animal and human epidermal sheets for in vitro 2004 Acta Pharmaceutica 54 4 287 299 11

81

Tiwary, A. permeation of polar and non polar drugs

347

Bhatti, H.S., Sharma, R., Verma, N.K., Kumar, S.

Laser-induced phosphorescence studies of doubly-doped CaS phosphors 2004

Indian Journal of Engineering and Materials Sciences 11 2 121 124 11

348

Singh, S., Thakur, O.P., Prakash, C., Raina, K.K.

Dielectric, ferroelectric and piezoelectric properties of La-modified PCT ceramics 2005 Physica B: Condensed Matter 369 ##### 64 71 11

349

Mehta, S.K., Malik, A.K., Singh, B., Rao, A.L.J.

Development of new adsorbent chitin for column preconcentration and spectrophotometric trace determination of Ziram and Zineb in synthetic, commercial samples and food-stuffs 2005 Talanta 67 4 725 729 11

350

Singh, S., Thakur, O.P., Prakash, C., Raina, K.K.

Structural and electrical properties of lanthanum-substituted lead titanate ceramics 2005 Phase Transitions 78 ##### 655 667 11

351

Singh, S., Thakur, O.P., Rawal, D.S., Prakash, C., Raina, K.K.

Improved properties of Sm substituted PCT ceramics using microwave sintering 2005 Materials Letters 59 7 768 772 11

352

Chakraverty, S., Singh, V.P., Sharma, R.K.

Regression based weight generation algorithm in neural network for estimation of frequencies of vibrating plates 2006

Computer Methods in Applied Mechanics and Engineering 195 33-36 4194 4202 11

353

Sharma, A.K., Sharma, R.K., Kasana, H.S.

Empirical comparisons of feed-forward connectionist and conventional regression models for prediction of first lactation 305-day milk yield in Karan Fries dairy cows 2006

Neural Computing and Applications 15 ##### 359 365 11

354 Sharma, V., Goyal, S.

Comparative study of performance of natural fibres and crumb rubber modified stone matrix asphalt mixtures 2006

Canadian Journal of Civil Engineering 33 2 134 139 11

355 Sharma, A., Kumar, R., Sharma, R.K.

Online handwritten Gurmukhi character recognition using elastic matching 2008

Proceedings - 1st International Congress on Image and Signal Processing, CISP 2008 2

391 396 11

356 Tiwari, S.D., Rajeev, K.P.

Paramagnetic to ferromagnetic transition and superparamagnetic blocking in Ni (OH) 2 2008

Physical Review B - Condensed Matter and Materials Physics 77 22

11

82

nanoparticles

357 Singh, S., Kaler, R.S. Placement of optimized semiconductor optical amplifier in fiber optical communication systems 2008 Optik 119 6 296 302 11

358

Singh, K., Kumar, S., Verma, N.K., Bhatti, H.S.

Photoluminescence properties of Eu3+-doped Cd1-x Zn x S quantum dots 2009


359

Noumowé, A., Siddique, R., Ranc, G.

Thermo-mechanical characteristics of concrete at elevated temperatures up to 310 °C 2009

Nuclear Engineering and Design 239 3 470 476 11

360 Garg, H.C., Kumar, V., Sharda, H.B.

Thermohydrostatic analysis of capillary compensated symmetric hole-entry hybrid journal bearing operating with non-Newtonian lubricant 2009

Industrial Lubrication and Tribology 61 1 11 21 11

361 Ratan, R., Sharma, S., Sharma, S.K.

Multiparameter segmentation and quantization of brain tumor from MRI images 2009

Indian Journal of Science and Technology 2 2 11 15 11

362

Malik, P., Raina, K.K., Bubnov, A., Chaudhary, A., Singh, R.

Electro-optic switching and dielectric spectroscopy studies of ferroelectric liquid crystals with low and high spontaneous polarization 2010 Thin Solid Films 519 3 1052 1055 11

363 Singla, R., Ganguli, A., Ghosh, M.

Antioxidant activities and polyphenolic properties of raw and osmotically dehydrated dried mushroom (Agaricus bisporous) snack food 2010

International Journal of Food Properties 13 6 1290 1299 11

364 Kaur, V., Kumar, S. Systematic study of multifragmentation in asymmetric colliding nuclei 2010


11

365

Kumar, S., Saini, D., Lotey, G.S., Verma, N.K.

Electrochemical synthesis of copper nanowires in anodic alumina membrane and their impedance analysis 2011

Superlattices and Microstructures 50 6 698 702 11

366

Sekhon, K.K., Khanna, S., Cameotra, S.S.

Enhanced biosurfactant production through cloning of three genes and role of esterase in biosurfactant release 2011 Microbial Cell Factories 10

11

367 Wason, A., Kaler, R.S.

Wavelength assignment algorithms for WDM optical networks 2011 Optik 122 10 877 880 11

83

368 Jindal, Z., Verma, N.K.

Structural and optical properties of CdS nanorods and CdS/ZnS nanoslabs 2011


369 Aron, R., Chana, I. Formal QoS policy based Grid resource provisioning framework 2012 Journal of Grid Computing 10 2 249 264 11

370 Kaler, R., Kaler, R.S. Investigation of four wave mixing effect at different channel spacing 2012 Optik 123 4 352 356 11

371 Kaur, K., Lotey, G.S., Verma, N.K.

Structural, optical and magnetic properties of cobalt-doped CdS dilute magnetic semiconducting nanorods 2013

Materials Chemistry and Physics 143 1 41 46 11

372 Kaur, R., Singh, S., Pandey, O.P.

Influence of CdO and gamma irradiation on the infrared absorption spectra of borosilicate glass 2013 Journal of Molecular Structure 1049

409 413 11


Influence of the word length and input power on nonlinear crosstalk induced by hybrid optical amplifiers 2013 Optical Fiber Technology 19 5 428 431 11


Investigation of hybrid optical amplifiers with different modulation formats for DWDM optical communication system 2013 Optik 124 15 2131 2134 11

375

Kaur, G., Singh, K., Pandey, O.P., Homa, D., Scott, B., Pickrell, G.

Structural and thermal properties of glass composite seals and their chemical compatibility with Crofer 22APU for solid oxide fuel cells applications 2013 Journal of Power Sources 240

458 470 11

376

Mondal, B., Srivastava, V.C., Kushwaha, J.P., Bhatnagar, R., Singh, S., Mall, I.D.

Parametric and multiple response optimization for the electrochemical treatment of textile printing dye-bath effluent 2013

Separation and Purification Technology 109

135 143 11

377 Singh, S., Singh, A., Kaler, R.S.

Performance evaluation of EDFA, RAMAN and SOA optical amplifier for WDM systems 2013 Optik 124 2 95 101 11

378

He, D., Kumar, N., Chen, J., Lee, C.-C., Chilamkurti, N., Yeo, S.-S.

Robust anonymous authentication protocol for health-care applications using wireless medical sensor networks 2013 Multimedia Systems 21 1 49 60 11

379 Kundu, P.P., Verma, Influence of different polyesters and their 2002 Journal of Applied Polymer 87 2 284 289 10

84

G., Raina, K.K. molecular weight on the textural and electrooptical behavior of polymer-dispersed liquid crystals

Science

380

Kumar, V., Sharma, S.C., Jain, S.C., Nagaraju, T.

Comparative performance of hole-entry journal bearing operating with different restrictors 2002

Journal of the Institution of Engineers (India): Mechanical Engineering Division 83 OCT. 116 123 10

381 Kohli, A., Saini, B.C.

Microclimate modification and response of wheat planted under trees in a fan design in northern India 2003 Agroforestry Systems 58 2 109 117 10

382 Joshi, A., Kumar, S. Variation of dielectric strength of a insulation paper with thermal aging 2005 NDT and E International 38 6 459 461 10

383

Bhatti, H.S., Sharma, R., Verma, N.K.

Enhanced photoluminescence decay processes of doped CaS phosphors at low temperature 2006 Journal of Modern Optics 53 14 2021 2031 10

384

Bhatti, H.S., Gupta, A., Verma, N.K., Kumar, S. Optical characterization of ZnO nanobelts 2006

Journal of Materials Science: Materials in Electronics 17 4 281 285 10

385

Bhatti, H.S., Sharma, R., Verma, N.K.

Fast photoluminescence decay processes of doped CaS Phosphors 2006

Radiation Effects and Defects in Solids 161 2 113 119 10

386 Kumar, V., Saxena, S.C., Giri, V.K.

Direct data compression of ECG signal for telemedicine 2006

International Journal of Systems Science 37 1 45 63 10

387

Kumar, M., Agarwal, D., Ghosh, M., Ganguli, A.

Microbiological safety of street vended fruit chats in Patiala City [1] 2006

Indian Journal of Medical Microbiology 24 1 75 76 10

388

Toor, A.P., Singh, V., Jotshi, C.K., Bajpai, P.K., Verma, A.

Treatment of bleaching effluent from the pulp and paper industry by photocatalytic oxidation 2007 Tappi Journal 6 6 9 13 10

389 Gomber, C., Saxena, S.

Anti-staphylococcal potential of Callistemon rigidus 2007

Central European Journal of Medicine 2 1 79 88 10

390 Singh, R.I., Mohapatra, S.K.,

Studies in an atmospheric bubbling fluidized-bed combustor of 10 MW power plant based on rice 2008

Energy Conversion and Management 49 11 3086 3103 10

85

Gangacharyulu, D. husk

391 Kaur, B., Verma, R. Use and impact of electronic journals in the Indian institute of technology, Delhi, India 2009 Electronic Library 27 4 611 622 10

392

Randhawa, R., Sohal, J.S., Kaler, R.S.

Optimum algorithm for WDM channel allocation for reducing four-wave mixing effects 2009 Optik 120 17 898 904 10

393 Sharma, A., Das, S.

Study of age hardening behavior of Al-4.5 wt%Cu/zircon sand composite in different quenching media - A comparative study 2009 Materials and Design 30 9 3900 3903 10

394

Gupta, S., Chakrabarti, S.K., Singh, S.

Effect of ozonation on activated sludge from pulp and paper industry 2010 Water Science and Technology 62 7 1676 1681 10

395

Awasthi, A., Singh, N., Mittal, S., Gupta, P.K., Agarwal, R.

Effects of agriculture crop residue burning on children and young on PFTs in North West India 2010

Science of the Total Environment 408 20 4440 4445 10

396

Singh, A., Narang, S.B., Singh, K., Pandey, O.P., Kotnala, R.K.

Electrical and magnetic properties of rare earth substituted strontium hexaferrites 2010

Journal of Ceramic Processing Research 11 2 241 249 10

397 Gupta, S.K., Kailey, N.

A note on multiobjective second-order symmetric duality 2010

European Journal of Operational Research 201 2 649 651 10

398 Jain, A., Kumar, S., Puri, R.K.

Influence of charge asymmetry and isospin-dependent cross section on nuclear stopping 2011


10

399 Gill, J.K., Pandey, O.P., Singh, K.

Ionic conductivity, structural and thermal properties of pure and Sr 2+ doped Y2Ti2O7 pyrochlores for SOFC 2011 Solid State Sciences 13 11 1960 1966 10

400 Kumar, R.

Effect of isospin on the fusion reaction cross section using various nuclear proximity potentials within the Wong model 2011


10

401 Chahal, N., Rajor, A., Siddique, R.

Calcium carbonate precipitation by different bacterial strains 2011

African Journal of Biotechnology 10 42 8359 8372 10

86

402 Kumar, A., Singh, P., Kaur, P., Kaur, A.

RM approach for ranking of L-R type generalized fuzzy numbers 2011 Soft Computing 15 7 1373 1381 10

403 Mishra, T., Garg, D., Gore, M.M.

A publish/subscribe communication infrastructure for VANET applications 2011

Proceedings - 25th IEEE International Conference on Advanced Information Networking and Applications Workshops, WAINA 2011 442 446 10

404 Gill, G.S., Kumar, A., Agarwal, R.

Monitoring and grading of tea by computer vision - A review 2011

Journal of Food Engineering 106 1 13 19 10


Sintering behavior of nanostructured WC-Co composite 2011

Ceramics International 37 4 1415 1422 10

406 Jain, A., Mehta, R., Mittal, S.K.

Modeling impact of solar radiation on site selection for solar PV power plants in India 2011

International Journal of Green Energy 8 4 486 498 10

407 Kumar, S., Singh, K., Saxena, R.

Analysis of Dirichlet and Generalized "hamming" window functions in the fractional Fourier transform domains 2011

Signal Processing 91 3 600 606 10

408 Banga, V.K., Kumar, R., Singh, Y. Fuzzy-genetic optimal control for robotic systems 2011

International Journal of Physical Sciences 6 2 204 212 10


Optical, structural, and mechanical properties of different valence-cation-doped bismuth vanadate oxides 2012

Physica Status Solidi (A) Applications and Materials Science 209 7 1231 1238 10

410

Siddique, R., Kapoor, K., Kadri, E.-H., Bennacer, R.

Effect of polyester fibres on the compressive strength and abrasion resistance of HVFA concrete 2012


270 278 10

411

Bhatia, K.S., Kaler, R.S., Kamal, T.S., Randhawa, R.

Monitoring and compensation of optical telecommunication channels by using optical add drop multiplexers for optical OFDM system 2012

Journal of Optical Communications 33 1 9 13 10

412 Kumar, M., Ghosh, M., Ganguli, A.

Mitogenic response and probiotic characteristics of lactic acid bacteria isolated from indigenously 2012

World Journal of Microbiology 28 2 703 711 10

87

pickled vegetables and fermented beverages and Biotechnology

413 Dhir, A., Prakash, N.T., Sud, D.

Comparative studies on TiO2/ZnO photocatalyzed degradation of 4-chlorocatechol and bleach mill effluents 2012

Desalination and Water Treatment 46 ##### 196 204 10

414 Rajni, Chana, I. Bacterial foraging based hyper-heuristic for resource scheduling in grid computing 2013

Future Generation Computer Systems 29 3 751 762 10

415

Supreet, Kumar, S., Raina, K.K., Pratibha, R.

Enhanced stability of the columnar matrix in a discotic liquid crystal by insertion of ZnO nanoparticles 2013 Liquid Crystals 40 2 228 236 10

416

Rani, R., Juneja, J.K., Singh, S., Raina, K.K., Prakash, C.

Study of 0.1Ni 0.8Zn 0.2Fe 2O 4-0.9Pb 1-3x/2La xZr 0.65Ti 0.35O 3 magnetoelectric composites 2013

Journal of Magnetism and Magnetic Materials 325

47 51 10

417

Garg, H., Rani, M., Sharma, S.P., Vishwakarma, Y.

Intuitionistic fuzzy optimization technique for solving multi-objective reliability optimization problems in interval environment 2014

Expert Systems with Applications 41 7 3157 3167 10

418 Kaur, N., Ali, A.

Kinetics and reusability of Zr/CaO as heterogeneous catalyst for the ethanolysis and methanolysis of Jatropha crucas oil 2014

Fuel Processing Technology 119 173 184 10

88

Annexure 4 – List of Conferences, Workshops, Seminars organized

2014-15

S. NO Title of the Programme with sponsoring agency

Name of the Coordinators

Dates and Venue

1. Art of Science Communication American Society of Microbiology, USA

Dinesh Goyal 25.4.2015 Thapar Institute of Engineering and Technology University

2. IGS Workshop on Forensic Geotechnical Engineering

Rajesh Pathak GNEDC Ludhiana. Oct 10-12 October,2014

3. IGS Workshop on Forensic Geotechnical Engineering

Tanuj Chopra GNEDC Ludhiana. Oct 10-12 October,2014

4. 7th National Conference on Wind Engineering (Sponsored by TEQIP, BMTPC, Esscom India Ltd)

Dr. Naveen Kwatra, Dr. Shruti Sharma and Dr. Dwarikanath Ratha

21-22 Nov 2014 at Thapar Institute of Engineering and Technology University

5. Road Safety Audit Workshop for NH-1A sponsored by NHAI

Mr. Tanuj Chopra May 23, 2015 Thapar Institute of Engineering and Technology University

6. Hands-on workshop on SAP-ABAP Dr Singara Singh, Mr Khushneet Jindal

01 June 2015 to 26 June 2015

7. Six Week summer Training Programme on “Java, Oracle”, Self-Sponsored

Karun Verma, Varinder Pal Singh

June 01-July 10, 2015, Thapar Institute of Engineering and Technology University, Patiala

8. 6 days workshop on "Mobile Application Development using Android"

June 2nd to 7th, 2014

9. One day workshop on PLC , SCADA Systems

Ms. Manbir Kaur Nov. 16, 2014 Thapar Iniversity, Patiala

10. One day workshop on “Improvement in Personal Traits for career building” IET Delhi Network (UK)

Ms. Manbir kaur Oct. 21, 2014 Venue: C-Hall

11. Two days Workshop on LabView 2013 by National Instruments, Bangalore

Dr.RavinderAgarwal Mr. Mooninder Singh Dr.JainySachdeva

30th June, 2014 and 1st July 2014

89



Dates and Venue

Dr.GagandeepKaur Venue : VI Lab 12. One day workshop on Engineering &

Science Innovation Summit in Collaboration with ADCC and National Instruments

Dr. Gyan Ranjan Biswal Dr. Ravinder Agarwal

16th January, 2015 Venue: Auditorium

13. Two day workshop on “Hands on Labview” AmanpreetKaur, Sukhwinder Kumar

Thapar Institute of Engineering and Technology University, Patiala. NOV 22 – NOV 23, 2014

14. FPGA Design using XILINX

Dr Alpana Agarwal, Manu Bansal

9th - 10th Oct and 11th Oct, 2014 at Thapar Institute of Engineering and Technology University, Patiala.

15. Awareness session on VLSI-Semiconductor Industry Opportunity & Challenges by DKOP Labs

Dr Alpana Agarwal, Manu Bansal

March 26th, 2015 at Thapar Institute of Engineering and Technology University, Patiala.

16. Embedded Systems by HCL

March 30th, 2015 at 5 PM. at Thapar Institute of Engineering and Technology University, Patiala.

17. Designing and troubleshooting pneumatic conveying of bulk solids for fly ash handling in thermal power plants

Dr. S.S.Mallick, Mr. Atul Sharma and Mr. Gautam Setia

10-11th April, 2015

18. Expert lecture on “INNOVATION AND ENTREPRENEURSHIP” by Dr. Sanjeev Bedi, Professor Univ. of Waterloo, Canada.

Ajayinder Singh Jawanda

3rd July 2014, MED TU, Patiala Venue: D203.

19. Expert lecture on “PERSPECTIVE ON RESEARCH” by Dr. Sanjeev Bedi, Professor Univ. of Waterloo, Canada.


4th July 2014, MED TU, Patiala Venue: D203.

20. One Day workshop on Art of Loving. Dr Santa Kumari November 8, 2014

21. Two day workshop on Research Methodology.

Dr Ravi Kiran March,20-21, 2015

2013-14

90



Dates and Venue

22. Workshop on Basics and Applications of Aspen Plus

Dr. Raj Kumar Gupta & Dr. Vikas Kumar Sangal

13-14 September 2013 C-Hall & D-201

23. Faculty development programme on Advance Topics in Fluid Flow and Heat Transfer

Dr. Avinash Chandra & Dr. Dwarikanath Ratha

17–18 September 2013 CED Seminar room

24. Workshop on “Simulation of Engineering Systems”

Dwarika Nath Rath and Satish Kumar

19 August, 2013, Thapar Institute of Engineering & Technology University Patiala

25. Faculty development program on “Emerging Trends in Civil Engineering”

Tanuj Chopra, Rajesh Pathak and Naveen Kwatra

23 August, 2013, Thapar Institute of Engineering & Technology University Patiala

26. Faculty development program on “Advanced Topics in Fluid Flow and Heat Transfer”

Dwarika Nath Rath and Avinash Chandra

17-18 September, 2013, Thapar Institute of Engineering & Technology University Patiala

27. Workshop on “Health Monitoring of Infrastructures”

Shruti Sharma 25 October, 2013, Thapar Institute of Engineering & Technology University Patiala

28. Workshop on “Application of Remote Sensing and GIS in Civil Engineering”

Dwarika Nath Rath, Richa Babbar and Tapas Karmaker

6-7 March, 2014, Thapar Institute of Engineering & Technology University Patiala

29. Workshop on “Road Safety Audit sponsored by NHAI”

Road Safety Audit Team

10th & 11th April, 2014, Thapar Institute of Engineering & Technology University

30. International Workshop on Machine Learning Algorithms and Data Analytics from sponsored by ACM India Council, IEEE

3rd June-13th June at Thapar Institute of Engineering & Technology University, Patiala

91



Dates and Venue

Computer Society IC, IEEE Education Society IC, Infosys Ltd.

31. 3-Day workshop on wireless network simulation using NS2 at CSED, Thapar Institute of Engineering & Technology University, Patiala

Dr. Neeraj Kumar and Dr. Anil Kumar Verma

13-15th March,2014

32. Six Week summer Training Programme on “Java, Oracle”, Self-Sponsored

Karun Verma, Varinder Pal Singh

June 02-July 12, 2014, TU, Patiala

33. Workshop on LATEX, Spoken Tutorial Project IIT Bombay

Mr. Jinendra, IIT Bombay, Mr. Vinay Arora and Mr. Raj Kumar Tekchandani, Thapar Institute of Engineering & Technology University

22nd April 2014, Thapar Institute of Engineering & Technology University

34. Ethical hacking workshop Mr. Sahil Baghla from EH1 INFOTECH, Chandigarh, Mr. Vinay Arora and Mr. Raj Kumar Tekchandani, Thapar Institute of Engineering & Technology University

26th – 27th April 2014, Thapar Institute of Engineering & Technology University

35. Hands –on workshop on Python Sponsored by CCS (Creative Computing Society)

Shubhanshu, Sanyam

26-27 October, 2013, TU, Patiala

36. One day Workshop on Graduate Advantage Programme (GAP) IET Services India Ltd. (UK)

Ms. Manbir Kaur 22nd April, 2014 Thapar Institute of Engineering & Technology University, Patiala

37. One day Workshop on “Improvement in Personal Traits for career building”IET Delhi Network (UK)

Ms. Manbir Kaur 21st Oct., 2013 Thapar Institute of Engineering & Technology University, Patiala

92



Dates and Venue

38. Technical Paper Presentation “Present around The World” PATW 2014, level-I competition for undergraduate and post graduate students

Ms. Manbir Kaur 19th March,2014 & 29th March, 2014 Thapar Institute of Engineering & Technology University, Patiala

39. Workshop on Latest and specialized “Domains of Embedded System –8051”.

Dr. Sangeeta Kamboj 19th April 2014, Free Scale lab, TU, Patiala

40. Two days Professor Summit on Atmel XMEGA and ARM based SAM4L Microcontrollers sponsored by ATMEL

Ankush Kansal Karmjit Singh

15-16 July, 2013

41. A Two Day Workshop on “Applications of MATLAB in Engineering”

Dr. Hardeep Singh & Dr. Ajay Kakkar

24-25 August 2013, Thapar Institute of Engineering & Technology University, Patiala

42. Two Day Hands on workshop on “ Antenna Design using CSTMWS 10”

Amanpreet Kaur Jawsinder Kaur

June 17-18 2013, DSP Research Lab

43. One Day Workshop ON “Data Communication and Computer Networking , DCCN-2 014

Manu Bansal and Ajay Kakkar

20th April, 2014 TU, Patiala

44. TEQIP Sponsored FDP on "VLSI system Engineering & Verification”

Sakshi & Arun Kr. Chatterjee

14-18 October 2013, ECED, TU, Patiala

45. TEQIP-II sponsored one week short term training program on structural analysis using ANSYS “SAA-2013”

Mr. S K Sharma (Coordinator) Mr. R K Duvedi (Co-coordinator)

16th – 20th December, 2013, MED, TU, Patiala

46. EXPERT LECTURES AND TRAININGS on the area of CAD CAM. by Dr. SANJEEV BEDI, Professor Mechanical and Mechatronics Engineering Department, University of Waterloo, ONT, CANADA Sponsored by:TEQIP-Phase II


10 days – 1 to 14 August 2013 State Initiated Design Centre (SIDC LAB), MED, TU Patiala.

47. WORKSHOP ON CURRENT Ajayinder Singh 2-3 August 2013

http://www.thapar.edu/news-eventDet.asp?id=341







93



Dates and Venue

R&D IN MECHANICAL ENGINEERING. Sponsored by: TEQIP-Phase II

Jawanda State Initiated Design Centre (SIDC LAB), MED, TU Patiala.

48. EXPERT LECTURES AND TRAININGS on the area of CAD CAM. by Dr. SANJEEV BEDI, Professor Mechanical and Mechatronics Engineering Department, University of Waterloo, ONT, CANADA Sponsored by:TEQIP-Phase II


10 days – 1 to 14 August 2013 STATE INITIATED DESIGN CENTRE (SIDC LAB), MED, TU Patiala.

49. Expert lecture by Dr. Simarjeet Singh Saini,Associate Professor, Department of Electrical and Computer Engineering, Univ. of Waterloo. OnAdvances In Nano Photonic Sensors.


11 April 2014 MED TU, Patiala, in Convention Hall

50. Exposition to Research areas in Vibration & Noise , TEQIP

Dr. S.P. Nigam 16-17 August 2013, Thapar Institute of Engineering & Technology University

51. One day training programme on Automatic transmission gear box with representatives from Allison transmission, India Pvt. Ltd.

Mr. Sumeet Sharma Mr. Devender Kumar

Nov18 2013, Automobile laboratory

52. Material Tailoring in Functionally Graded Structures” (MTFGS-13)

Mr. Devender Kumar and Dr. H.L. Bhowmik

MED, Thapar Institute of Engineering & Technology University, 12th December, 2013 to 6th January, 2014

53. TEQIP sponsored Seminar on Role and Relevance of Ethics and IPRS in Changing business

Dr Rajesh Khanna & Dr Ravi Kiran

August 26, 2013

54. II National Conference on Innovative Molecules for

Dr. B. Pal Dr. A. Ali

October 24th -26th, 2013,School of

94



Dates and Venue

Sustainable Future (NCIMSF-2013)

Dr. K. Paul Chemistry and Biochemistry, TU, Patiala

55. Organized one day workshop on “Basics and Applications in catalysis”

Dr. A. Ali

held on 24th February 2014 at TU, Patiala

56. Fermenter design, operation and control, CORE Thapar Institute of Engineering & Technology University, Patiala

Anoop Verma

June 09, 2014 – June 17, 2014, at CORE, TU, Patiala

57. Workshop on MAD (Mobile Application Development) using Android

Dr. Rajesh Kumar Ms. Sanmeet Kaur

02-07, June 2014

58. Two-Day "SAP HANA & APAP for HANA" workshop sponsored by SAP India Pvt. Ltd.

Dr. Rajesh Kumar Dr. Singara Singh Mr. Khushneet Jindal

09-10, June 2014

59. DAE- Solid State Physics Symposium, DAE

Dr.K.K.Raina, Dr. S.C. Gadkari

17-21 Dec., 2013, TU, Patiala

60. Workshop under BARC outreach programme.

Dr. Manoj Kumar Sharma

March 3-5, 2014. TU, Patiala

95

Annexure 5 Outstanding achievements of faculty

S.NO. Name of the faculty Award / Fellowship/

Nominations

University/ Organization

Month and Year

1. Dr. Rajeev Mehta National award for Technology Innovation in Petrochemicals & Downstream Plastics Processing Industry

Ministry of Chemicals & Fertilizers, Government of India

Feb, 2015

2. Dr. Avinash Chandra Foreign Travel Grant for Participating in, CHT-15, USA

SERB, DST May, 2015

3. Dr. Avinash Chandra Foreign Travel Grant for Participating in CHT-15, USA

CICS May, 2015

4. Naveen Kwatra E P Nicolaides Prize for paper titled “ Finite Element Modeling of Reinforced Concrete Corners under Opening Bending Moment”

The Institute of Engineers (India)

2014

5. Dr. Maneek Kumar Member, Board of Studies of Civil Engineering

Kurukshetra University, Kurukshetra

July 2013 for two years


MM Engineering College, Mullana, Ambala

April 2013 for two years

7. Dr. Naveen Kwatra Member, Board of Studies of Civil Engineering

HPTU, Hamirpur

8. Maninder Singh Certified Ethical Hacker v8

EC-Council Oct 2014

9. Dr. Deepak Garg Member, Advisory Committee, International Conference on

Sri Ramakrishna Engineering College,

July 10-12, 2014

96


Nominations


Month and Year

Recent Advancements in Information Technology (ICRAIT‟14)

Coimbatore, Tamilnadu

10. Dr. Deepak Garg Member, Scientific Advisory Committee of International conference on Soft Computing Techniques for Engineering & Technology (ICSCTET2014)

Graphic Era Hill University, Dehradun, Uttrakhand

August 7-8, 2014

11. Dr. Deepak Garg Member, Steering Committee 3rd International Conference on Advances in Computing, Communications and Informatics (ICACCI)

Galgotia University, Greater Noida, Uttar Pradesh

September 24-27, 2014

12. Dr. Deepak Garg Member, Advisory Committee, REDSET 2014, a National Conference on Recent Developments of Science, Engineering and Technology

GD Goenka University, Gurgaon, Haryana

October 17-18, 2014

13. Dr. Deepak Garg Member, Technical program Committee, International Conference on Computational Intelligence and Communication Networks (CICN

Rajsthan Vidyapeeth University, Udaipur, Rajsthan

November 14-16, 2014

97


Nominations


Month and Year

2014)

14. Dr. Deepak Garg Member, Advisory Committee, National Workshop on Network, Network Simulation & Information Security (NWNSIS-2014)

Institute of Science & Technology for Advanced Studies & Research ISTAR, Anand, Gujarat

November 24-29, 2014

15. Dr. Deepak Garg Member, Technical Program Committee of International Conference on Contemporary Computing and Informatics (IC3I)

SJCE, Mysore November 27-29, 2014

16. Dr. Deepak Garg Member, Steering Committee, 3rd International Conference on Eco-friendly Computing and Communication Systems (ICECCS2014)

NIT Surathkal, Mangalore, Karnataka

December 18-21, 2014

17. Dr. Deepak Garg Member, Advisory Board, International Conference on High Performance Computing and Applications (ICHPCA)

CV Raman College of Engineering, Bhubaneswar, Orissa

December 22-24, 2014

18. Dr. Deepak Garg Member, Advisory Committee, International Conference on Advances in Computing, Communication and Control ICAC3 biennial conference

Fr. Conceicao Rodrigues College of Engineering, Bandra, Mumbai, Maharashtra

January 23-24, 2015

19. Dr. Deepak Garg Member, Advisory Committee, Future

IIS University, Jaipur, Rajsthan

January 30-31, 2015

98


Nominations


Month and Year

Directions in Multidisciplinary Perspective of Computer Science and Information Technology: Scope & Challenges

20. Dr. Deepak Garg Member, Program Committee, 5th Student Research Symposium held with 11th International Conference on Distributed Computing and Internet Technology (ICDCIT 2015)

KIIT University, Bhubaneswar, Odisha

February 5-8 2015

21. Dr. Deepak Garg Member, Technical Program Committee, first International Conference on Cognitive Computing and Information Processing (CCIP-15)

JSS Academy of Technical Education, Noida, Uttar Pradesh

March 3-4, 2015

22. Dr. Deepak Garg Member, Advisory Board, International Conference on Information, Computation and Communications (ICIC2-2015)

Kalaignar Karunanidhi Institute of Technology, Coimbatore, Tamilnadu

March 6-7, 2015

23. Dr. Deepak Garg Member, Technical Advisory Committee at IEEE International Conference on Computing, Communication & Automation

Galgotias University, Greater Noida, Uttar Pradesh

May 15-16, 2015

99


Nominations


Month and Year

24. Dr. Deepak Garg Member, Technical Program Committee, The Second International Conference on Advances in Computing and Communication (ICACCE- 2015)

Tula‟s Institute of Engineering and Management College, Dehradun, Uttrakhand

April 17-18, 2015

25. Parteek Bhatia Parteek Bhatia

Winner of Gold medalist for UNL Olympiad-IV for development of EUGENE module for Punjabi Language and Hindi Language conducted by. Winner of Gold medalist for UNL Olympiad-IV for development of IAN module for Punjabi Language and Hindi Language conducted by Switzerland in year 2014.

UNDL Foundation, Geneva Switzerland UNDL Foundation, Geneva

2014 2014

26. Karamjit Kaur Google Global Scholarship for attending Conference held in USA

Google October 2014

27. Ms. Manbir Kaur Member Fellowship IET London 2014-15

28. Ravi Kiran Best Paper of Session

Int.Conference on Mgmt Sciences and Innovation ICMSI, Genewa,

Oct, 10-11, 2014

100


Nominations


Month and Year

Switzerland

29. Dr. Rajeev Mehta National award for Technology Innovation in Petrochemicals & Downstream Plastics Processing Industry

Ministry of Chemicals & Fertilizers, Government of India

Feb 21, 2015

30. Dr. Avinash Chandra Foreign Travel Grant for Participating in, CHT-15, USA

SERB, DST May, 2015

31. Dr. Avinash Chandra Foreign Travel Grant for Participating in CHT-15, USA

CICS May, 2015

32. M S Reddy Agnihothrudu Memorial award

Mycological Society of India

February 2014

33. Dr. Sanjai Saxena Eminent Microbiologist Award

Association of Advancement of Biodiversity Science, Dharwad, Karnataka

December 2013

34. Dr. Sanjai Saxena Fellow Fellow ABS

Association of Advancement of Biodiversity Science, Dharwad, Karnataka

January 2014

35. Vikas Handa Member of Board of Studies for Biotechnology Engineering and Sciences

Punjab Technical University, Kapurthala

June 2014 for two years

36. Vikas Handa Member of Jury, Evaluated projects / models in INNOTECH-2014

Pushpa Gujral Science City, Kapurthala in collaboration with Punjab Technical University, Kapurthala

(March 2014)

101


Nominations


Month and Year


Kurukshetra University, Kurukshetra

July 2013 for two years


MM Engineering College, Mullana, Ambala

April 2013 for two years


HPTU, Hamirpur

July 2013


Bahara University, Solan

July 2013

41. Dr. Deepak Garg Session Chair IEEE 4th International Conference on Advance Computing (IACC-14) at ITM University, Gurgaon

February 21-22, 2014

42. Dr. Deepak Garg

Keynote Address at IEEE International Conference on MOOC, Innovationa and Technology in Education

Poornima Group of Colleges, Jaipur

21 Dec 2013

43. Dr. Deepak Garg Keynote Address: MOOCs in the current context

CII Conference on e-learning and e-publishing, Hotel park Sheraton, Chennai

16 Dec 2013

44. Dr. Deepak Garg Chair at IEEE International Conference on MOOC, Innovation and Technology in Education MITE


21 Dec 2013

45. Dr. Deepak Garg Keynote address on Chitkara 19th Dec

102


Nominations


Month and Year

Various Aspects of MOOCs , IEEE International Conference on Management of Knowledge Economy (IMKE-2013)

University, Punjab

2013

46. Dr. Deepak Garg Keynote Address at IEEE International Conference on MOOC, Innovationa and Technology in Education (MITE 2013) Conference


21 Dec 2013

47. Dr. Deepak Garg Invited Jury Member

5th DSCI best practices meet by DSCI (Data Security Council of India, A Nasscom Initiative)

Grand Hyatt, Chennai on July 13 2013

48. Dr. Maninder Singh Instructor Excellence Award: Expert Level

CISCO Networking Academy

2013

49. Dr. Maninder Singh Instructor Years of Service

CISCO Networking Academy

2013

50. Dr. Maninder Singh Science Direct TOP25: Jan-March 2013

Science Direct 2013

51. Dr. Maninder Singh Certified Ethical Hacker

EC_Council, USA

2014

52. Dr. Parteek Bhatia Gold Medal in 3rd UNL Olympiad

UNDL Organization, Switzerland

May 2014

53. Mr. Vinay Arora Letter of appreciation from Head of department for successful and

Thapar Institute of Engineering and Technology University

2014

103


Nominations


Month and Year

timely automation of IAP activities

54. Karamjit Kaur DST Complete Financial Assistance to attend EDBT Summer School held in France.

DST September 2013.

55. Karamjit Kaur Google Global Scholarship for attending GHC held in USA.

Google October 2013.

56. Dr. Ravinder Agarwal

Best paper award Admet - 2014 February 2014

57. Ms. Manbir Kaur Member Fellowship

IET London 2013-14

58. Ms. Suman Bhullar Best Paper Award 7th Int. Conf.on Advanced Computing and Communication Technologies, APIIT, Panipat

November 2013

59. Dr. S. K Mahla ISTE Best Teacher Award for year 2013

60. Dr. A.S Reddy Member State Expert Appraisal Committee – SEAC Pb

Punjab state June,2014

61. Dr. Deepak Gumber UGC Research Award

UGC Dec. 2013

104

Outstanding Achievements of Thapar Alumni:

1. Tarlochan S. Sidhu, Ph.D., P.Eng., CEng. BE-174/75 (EE), Chair, Department of Electrical and Computer Engineering Professor and Hydro One Chair in Power Systems Engineering The University of Western Ontario London, Ontario, CANADA, N6A 5B9

Adjunct Professor, Department of Electrical and Computer Engineering University of Waterloo Waterloo, ON, CANADA Telephone: 519-661-3758 Fax: (519) 850-2436 Email: [email protected]

2. Mr. Mohan Das Saini heads the global operations as Managing Director & CEO of Shapoorji Pallonji International, based at SPs International Headquarters in Dubai, Mr.Saini closely overlooks the operations and strategic Planning both in India and abroad. He continues to establish new benchmarks for the company which has also won several awards in Safety, Environment and Human Resources apart from excellence in Design and Construction. Mr. Mohandass Saini joined Continental Constructions, New Delhi after

graduating from Thapar Institute of Engineering and Technology in Civil

Engineering in 1976. He gained valuable experience in Projects in India and Iraq

where he worked for 5 years and in 1985, he joined Shapoorji Pallonji and

Company Ltd. In 1993, he was the Head for SPCL‟s first major industrial project

in South India-the MRPL Refinery near Mangalore. The terrain and local

conditions were challenging but Mr. Saini was successful in completing the

project.

In 1996, he moved to Bangalore where he set up the company‟s first Regional

division outside Maharashtra. His skills in execution and Project Management

and his commitment to meet deadlines and customer‟s requirements helped the

company bag several prestigious projects and in his 5 year tenure, he took

Bangalore Region to the top position in the company in turnover and profits and

established the company‟s brand in South. His efforts resulted in the

establishment of two further Regional Offices in Chennai and Hyderabad.

In 2001, Mr. Saini was elevated to the post of Director, Operations at the Head

Office in Mumbai. Here, he oversaw a period of very high growth in the

company‟s operations. This was achieved by expanding the company‟s

operations to new geographies like Gujarat, Kerala, Punjab, Rajasthan and the

mailto:[email protected]

105

North East and by setting up two new divisions-Design and Build and EPC -

thereby enhancing the company‟s capabilities. He set up a Design Center in India

and a Design Studio in Dubai.

The consistent efforts and leadership skills helped him rise to the position of

Chief Executive Officer of Shapoorji Pallonji in 2004. Moving ahead with the

internationalisation strategies, in 2006, he set up the Dubai Office and executed

major Projects in Africa (Mauritius, West Africa, Algeria, Libya), the mid-East (

UAE, Qatar, Saudi Arabia, Kuwait, Iraq), Guyana and Sri Lanka.

3. Vijay Kanwar, a Co-Founder and President of KMH Cardiology and Diagnostic Centres Inc., Chairman, Board of Directors, Greater Toronto Airports Authority (GTAA) displays outstanding management capabilities and business leadership skills. Mr. Kanwar has been a member of the Board of Directors, GTAA since May 2006. Mr. Kanwar holds a Bachelor of Engineering in Mechanical Engineering from

Thapar Institute of Engineering and Technology University, Patiala, India,

Masters of Business Administration from the Rotman School of Management,

University of Toronto. He has to his credit Masters of Laws LLM (Business Law)

from Osgoode Hall Law School.

Mr. Vijay Kanwar, a Co-Founder and President of KMH Cardiology and

Diagnostic Centres Inc., Chairman, Board of Directors, Greater Toronto Airports

Authority (GTAA) displays outstanding management capabilities and business

leadership skills. Mr. Kanwar has been a member of the Board of Directors,

GTAA since May 2006.

Mr. Kanwar holds a Bachelor of Engineering in Mechanical Engineering from

Thapar Institute of Engineering and Technology University, Patiala, India,

Masters of Business Administration from the Rotman School of Management,

University of Toronto. He has to his credit Masters of Laws LLM (Business Law)

from Osgoode Hall Law School.

Presently he is also serving as Chairman, Treasury Board of Canada‟s Advisory

Council; Board of directors, York University Board of Governors, Schulich School

of Business; Advisory Board for the Health Industry Management Program, the

Maple Leaf Sports and Entertainment Team Up Foundation, and Mount Sinai

Hospital.

An innovative corporate leader, he has won a number of awards. Mr. Kanwar

received the Ernst & Young Entrepreneur of The Year award in 2006 in Science

and Technology. He was named recipient of the 2009 New Pioneers

106

Entrepreneurship Award, and in 2012, he received the Queen‟s Diamond Jubilee

Medal.

In addition to his extensive business experience, Mr. Kanwar has a strong

commitment to community development, actively supporting several

foundations. He serves on the Board of Directors of the MLSE Team Up

Foundation, the Royal Ontario Museum Foundation, the Sunnybrook Foundation

and the Natural Sciences and Engineering Research Council of Canada. He

epitomizes strong financial management, exceptional governance and a

commitment to improving both his own community and other around the world

in the global market.

4. Ashok Khosla 21/73. Electrical, passed out in 1977. CEO Om Associates Pte Ltd., Singapore (2004). This company with virtually no capital but galloped to a turnover of S$ 270 million in year 2010 – 2011, with offices in 6 countries and a state of art 24000 sq ft manufacturing facility, in NSEZ, Noida. Today, globally well recognized in our field. Our wholly owned subsidiary in India is first of it‟s kind. Using highly advanced technology, it could not only withstand Chinese competition but also export to 21 countries. It has won exports awards every year from Govt. of India.

5. Robin Raina BE -168/85 (IE) (born July 31, 1967) is chairman and CEO of Ebix Inc. and founder of the Robin Raina Foundation. The Ebix group of companies trades on the NASDAQ Global Select Market under the ticker symbol EBIX. Raina joined Delphi Information Systems, Inc. in 1997 as Vice President of Professional Service In August 1999 he was promoted to the added title of President, having previously been named COO. In 1999 Delphi changed its name to Ebix.com and then in 2003 changed its name to Ebix Inc Raina's charity, the self-named 'Robin Raina Foundation', supports children in

education, food, shelter and medical needs. The foundation is presently carrying

out the largest private charity home building initiative in the Indian sub-

continent, in terms of building 6000 homes, free of cost, for the slum dwellers of

Delhi.

He has been featured and interviewed for numerous stories in business

magazines ranging from PC Magazine, PC world, Industry Standard, Computer

World, CIO,CFO, Reuters etc.

Robin Raina has been featured in many stories and articles in the world wide

press on him ranging from Reuters, Atlanta Journal Constitution, CIO

Magazine, CFO Magazine,San Francisco Chronicle, Crain‟s Weekly, India

Today, Times of India, Indian Express, Business World, The Economic

Times, Hindu, Dataquest, PC Quest, Khabar, India West etc.

http://www.pcworld.com/

http://www.computerworld.com/



http://www.cio.com/

http://www.cfo.com/

http://en.wikipedia.org/wiki/Reuters

http://en.wikipedia.org/wiki/Reuters

http://en.wikipedia.org/wiki/Atlanta_Journal_Constitution

http://www.cio.com/

http://www.cio.com/

http://www.cio.com/

http://en.wikipedia.org/wiki/CFO_Magazine

http://en.wikipedia.org/wiki/San_Francisco_Chronicle

http://www.crain.com/

http://en.wikipedia.org/wiki/India_Today



http://en.wikipedia.org/wiki/Times_of_India

http://en.wikipedia.org/wiki/Indian_Express

http://www.businessworld.in/

http://en.wikipedia.org/wiki/The_Economic_Times



http://www.thehindu.com/

http://en.wikipedia.org/wiki/Dataquest

http://en.wikipedia.org/wiki/PCQuest_(magazine)

http://www.khabar.com/

107

6. Dr. Nirmaljeet Singh Kalsi, a 1984 Batch Officer of the Indian Administrative Service (IAS), is a professional with wide ranging skills & competencies in administration, technology management, reforms and project management. Presently he is working as Additional Chief Secretary to Government of Punjab,

Principal Resident Commissioner, Punjab Bhawan, New Delhi & Department of

Public Works (B&R) and Department of Removal of Grievances & Welfare of

Pensioners after working for 7 years in the Ministry of Home Affairs,

Government of India on deputation.

Earlier he worked as Advisor & Additional Secretary to Government of India,

Inter State Council Secretariat (ISCS), Ministry of Home Affairs since October,

2014. He also looks after the work of 5 Zonal Councils. Before taking up this

assignment he worked as Joint Secretary police, Government of India, Ministry of

Home Affairs, North Block, New Delhi looking after the end to end management

and utilization of 9.54 Lac strong Central Armed Police Forces, including Border

Security Force (BSF), Central Industrial Security Force (CISF), Central Reserve

Police Force (CRPF), Indo Tibetan Border Police (ITBP), Shasastra Seema Bal

(SSB), Assam Rifles (AR) and National Security Guard (NSG). Earlier he handled

the Centre-State Division of MHA as Joint Secretary (CS).

He was also responsible for Cyber Security and Information Security as Chief

Information Security Officer of MHA and various projects related to Information

& Communication Technology in the Ministry of Home Affairs. Dr. Kalsi has

worked hard on bringing the National Information Security Policy and

Guidelines 2014 which have been issued by Ministry of Home Affairs,

Government of India for implementation in the all the Government of India

Ministries, Departments and PSUs.

Previously he headed the Department of Employment Generation and Training,

Government of Punjab, the Department of Information Technology, including

Administrative Reforms, Government of Punjab as Director-cum-Secretary and

also spearheading the IT Industry initiative of Government of Punjab as

Managing Director, Punjab Information and Communication Technology

Corporation Limited and Chairman of Punjab Venture Capital Fund Ltd.

7. Neeraj Kansal, I.R.S. (C&CE) Additional Commissioner of Central Excise, Delhi-I, May17, 2013 till date.

Awarded the Chairman‟s Gold Medal for being the Best Probationer in the 46th

batch (1993) of IRS (C&CE).

- Customs & Central Excise Division, Muzaffarnagar was declared as the

Best Division of the Meerut Commissionerate under my charge for the year 1996.

108

8. Prem Kumar Kapoor B.E. (Mech.), Hons. (1977, Thapar Institute of Engineering and Technology

University). He is Managing Director, Shivpra Cranes Private Limited. Started

career as apprentice Engineer in Star Steel Limited in 1977 and left the job in 1984

as Superintendent Engineer.

Started own business to market high-tech engineering products such as Belzona

Molecular metals from UK, Graphite packing from US, EOT Cranes, etc. in the

year 1985, at the age of 28 years.

Organized several Technical Seminars and trained engineers to use new high-

tech engineering products in several Public Sector organizations such as BHEL,

Thermal Power Plants, Paper Mills, Cement Plants, Sugar Plants, Steel Plants,

Defence organizations, etc. Started an Insulating Slab manufacturing unit named

Cold Lining Industry in the year 1988. Started the crane manufacturing company

named Shivpra Cranes Private Limited in the year 1989.Started Unit-2 and Unit-3

of Shivpra Cranes Private Limited eventually.

Shivpra Cranes that was started with a workforce of 5-6 workers with an

installed capacity of manufacturing 4 cranes per annum now employees over 50

engineers and 150 workers manufacturing over 120 cranes per annum. Shivpra

Cranes has successfully manufactured over 3000 cranes till date. All mechanical

equipment including gearboxes, gear couplings, wheel assemblies, Rope drum

assemblies, etc. are designed and manufactured in house.

Designed, manufactured & commissioned import substitute Gantry Crane with

overhang for Granite Plants for the first time in the year 1991. Supplied and

installed cranes in various 100% Export Oriented Granite Processing Units.

Designed, manufactured & commissioned Sugar Cane unloaders for Sugar

Plants in A.P. Previously Sugar Plants required 50 workers per shift for cane

unloading, which was reduced to 4 workers per shift using Shivpra

Cranesunloaders.

Designed, manufactured & commissioned various Steel Plant Cranes.

Designed, manufactured & commissioned a 35-meter span Gantry Crane with an

overhang of 10 meters on each side i.e. a55 meter girder crane.

Designed, manufactured & commissioned 130 Ton Gantry Cranes for Bangalore

Metro.

Shivpra Cranes Private Limited is now the largest crane manufacturer in entire

South India and is among the leading Crane manufacturers in the entire country.

Cranes manufactured by Shivpra Cranes are supplied all over India, Iran, UAE

and several African countries.

109

110 Cranes in BHEL Hyderabad are being maintained exclusively by Shivpra

Cranes Private Limited since last 6 years and order for next two years is awarded

for 4thconsecutive time.

9. Anoop Kumar Mittal is a Civil Engineer by profession and is the Chairman-cum-Managing Director of National Buildings Construction Corporation Limited] a Navratna Central Public Sector Enterprise (CPSE). NBCC has built an admirable track record under his dynamic leadership and is poised to achieve greater heights in the days ahead. A Civil Engineering Enterprise of the Government of India, NBCC operates in three main segments: i) Project Management & Consultancy (PMC), ii) Real Estate Development, and iii) EPC Contract.The Company was listed on BSE/NSE in April 2012 with a total market capitalisation of approximately Rs1,270 crore. Today, its market cap has reached approx. Rs12,000 crore – an increase of almost ten times within a span of just three years. NBCC has been consistently rated “Excellent” by the Govt. of India for its remarkable performance during the past decade. Under Mittal‟s proactive leadership, NBCC recently established another business model – redevelopment of old Government properties of PSUs such as AIR INDIA, NAWADCO, and HUDCO as well as Government Departments such as the Ministry of Urban Development, including the state Govt. of Odisha and Govt. of Rajasthan, into new modern residential and commercial complexes all over the country as per a self-sustaining model. NBCC has a presence in almost all states within India and also executes projects abroad.

Year of Award

or Honor Name of Award or Honor

Awarding

Organization

2015 Best PSU CMD of the year, BT-Star

PSU Awards 2015[ Bureaucracy Today

2014 PSE Persona of the Year, IPSE

Awards 2014 Enertia Foundation

2014 PMA Honorary Fellowship Award

2014, CEPM[

International Project

Management

Association

2014 Infra Person of the Year, Real Estate

Awards 2014

Worldwide Achievers

Pvt. Ltd.

2014 Achievement Award for Public

Officer (Code-C),CIDC Vishwakarma

Construction Industry

Development Council

110

Awards-2014

2014 Udyog Rattan Award Indian Economic

Society

50-point performace indicators (core/desirable) self ... point performance... · 50-point...

Documents