50303906a hdgi-n31npv2s9d nobrandeng.hitron.co.kr/wp-content/uploads/2016/07/hdgi-n31npv2... ·...
TRANSCRIPT
2.MATERIAL:
3.COLOR: BLACK
14
8+
/-5
)mm
Full HD Dome Camera
3-AXIS INFRARED-LEDPLASTIC DOME CAMERA
HDGI-N31NPV2S9D/NoBrand
PRODUCTION RELEASE & REVISION
REV DESCRIPT’N/BUYER DWG No PARTS No. BY CHK DATE
TITLE
SIZE REV.
SCALE
MATERIAL
UNLESS OTHERWISE SPECIFIEDALL DIMENSIONS ARE IN MM.- TOLERANCE LABEL +/- 3 MANUAL +/- 5 GUIDE +/- 5
COLOR
DATE
DRAWN
CHKED
APPROVALS
PARTS LIST
DESCRIPTION/MATERIALITEM QTY
A4DO NOT SCALE
2
2
3
전자
105(+/-5)mm
J.Y.LIU
M.J.KWON
50303906
A
강영구
M.J.KWON 15-04-15
15-04-15 15-04-15
K.H.JUNG
Instruction Manual
15-04-15
15-04-15
50303906
Full HDDome Camera
Instruction Manual
2
FCC COMPLIANCE STATEMENT
CE COMPLIANCE STATEMENT
CAUTION : Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
WARNING : This is a Class A product. In a domestic environment this product may cause
radio interference in which case the user may be required to take adequate measures.
FCC INFORMATION : This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions.
5.. Do not block any ventilat ion openings. Install in accord ance with the manufacturer`s
instructions. 6. Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat. 7. Only use attachments/accessories specified by the manufacturer. 8. Use only with the ca rt, stand, tripod, bracket, or table specified by
the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid
injury from tip-over.
9. CAUTION - THESE SERVICING IN STRUCTIONS ARE FOR USE BY QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO.
10. Use satisfy clause 2.5 of IEC60950-1/UL 60950-1 or Certified/Listed Class 2 power source only.
11. Indoor use only.
EXPLANATION OF GRAPHICAL SYMBOLS
IMPORTANT SAFETY INSTRUCTIONS
3
4
5
6
7
8
10
21
20
VIDEO OUT CHECK
CONTENTS & PACKAGE 6
BASE INSTALLATION
8
8
LENS ADJUSTMENT
DC AUTO IRIS LENS
5
The 1/2.8" 2.4M HD CMOS camera, especially for closed circuit televisionCCTV and security surveillance application.
1/2.8"
30 EA, 850nm IR LED
Auto and manual white balance modes (ATW/AWC/Manual/AWB)
3
HSBLC
DWDR
4
BLC (Back-light compensation)
25/30 fps @ 1080p
30
6
(IR Model 5 Watts)
Switch Cable : -Green & Black : open -> AHD signal BNC output
-Green & Black : short -> CVBS signal BNC output
BNC connector used to connect the camera to a DVR, etc.
7
8
9
1/2.8" CMOS
2.8 - 12mm
2.8mm : 109˚12mm : 37.8˚
WHITE BALBACKLIGHT
SENS-UP
D-WDR
<WHITE BAL>
OFFBLCHSBLC
<BACKLIGHT>
ATWAWC->SETINDOOROUTDOORMANUALAWB
<DAY&NIGHT>
SHARPNESSLSCD-EFFECTRETURN
CAM TITLEMONITORVIDEO OUTLANGUAGECOMETRETURN
<EXIT>
SAVE& ENDRESET
DEFECT DETNOT SAVE
10
11
MAIN MANU
LENSEXPOSUREBACK LIGHTWHITE BALDAY&NIGHTIMAGEFUNCTIONSYSTEMEXIT
DC
OFFATWAUTO
SAVE&END
MAIN MANU
LENSEXPOSUREBACK LIGHTWHITE BALDAY&NIGHTIMAGEFUNCTIONSYSTEMEXIT
MANUAL
OFFATWAUTO
SAVE&END
1)
2)
< EXPOSURE > MODE
1/50000, x2 ~ x30
Adjust the Auto Gain Control level. ▶ 0 - 15AGC
3) SENS-UP Select the Digital Slow Shutter level. ▶ OFF, AUTO (x2 ~ x30)
BRIGHTNESS Adjust the BRIGHTNESS level. ▶ 0 - 100
D-WDR
DEFOG
Select the Digital WDR.▶ AUTO, ON(level 0~8), OFF
AUTO, OFF
POS/SIZEGRADATION
DEFAULT
Adjust the window position & size▶ 0~2
Initialize the setting values
SHUTTERAGCSENS-UPBRIGHTNESSD-WDRDEFOGRETURN
AUTO|▪▪▪l▪| 11AUTO|▪▪l▪▪| 48OFFOFFRET
MAIN MANU
LENSEXPOSUREBACK LIGHTWHITE BALDAY&NIGHTIMAGEFUNCTIONSYSTEMEXIT
DC
OFFATWAUTO
SAVE&END
The EXPOSURE menu is used to set the automatic light control method for the camera. It provides the ability to adjust the SHUTTER speed, AGC, SENS-UP, BRIGHTNESS, D-WDR,and DEFOG functions of the camera.
Select the DC iris speed ▶ 0~15
▶ INDOOR, OUTDOOR
12
BACKLIGHT
The BACKLIGHT menu is used to the ability to prevent back lighting from the image.
1)BLC Prevents such a back light effect to secure a clear image under All illuminationenvironments.Adjust the size of Back Light Compensation area.
2)HSBLC Mask the high light zone with specific color & level.
Adjust the window position & sizeAREA
Initialize the setting valuesDEFAULT
Select the HSBLC area ▶ AREA1 - AREA4SELECT
Adjust the HSBLC area window position & sizeDISPLAY
Select the HSBLC level 0 ~ 100▶ LEVEL
All Day, NightMODE
Initialize the setting values.DEFAULT
HLBLC
SELECTDISPLAYBLACK MASKLEVELMODEDEFAULTRETURN
AREAONON|▪▪l▪▪| 30ALL DAY
RET
< BACKLIGHT >
BLC
LEVELAREADEFAULTRETURN
MIDDLE
RET
Select the BLC gain ▶ Low, Middle, HighLEVEL
Select the BLACK MASK ON, OFF▶ BLACK MASK
MAIN MANU
LENSEXPOSUREBACK LIGHTWHITE BALDAY&NIGHTIMAGEFUNCTIONSYSTEMEXIT
DC
OFFATWAUTO
SAVE&END
13
WHITE BALANCE
The screen color can be adjusted by using the Auto White Balance function.It compensates for deviations in the white color caused by changes in the color temperature of the light source so that the colors are reproduced correctly.
1)ATW
2)AWC->SET
3)INDOOR
4)OUTDOOR
5)MANUAL
Automatically adjust color temperature.
Automatically readjust only by pressing AWC→SET.
Set the color temperature to 3200°K
Set the color temperature to 6300°K
Manual mode. User can change Red and Blue gain value manually.
BLUE
RED
0 ~ 100
0 ~ 100
6)AWB Automatically extended range of color temperature adjustment.
MANUAL
BLUEREDRETURN
| I | 50|▪▪I▪▪| 50RET
▪▪ ▪▪
< WHITE BALANCE > MODE
MAIN MANU
LENSEXPOSUREBACK LIGHTWHITE BALDAY&NIGHTIMAGEFUNCTIONSYSTEMEXIT
DC
OFFATWAUTO
SAVE&END
14
.
CDS
IR SMART LEVEL 1~15 AREA Adjust the window position & size.
DAY&NIGHT mode are changed according to the brightness of the image.Use only when the camera is installed in a dark place but the camera is viewing a bright place. When used in a normal installation, hunting may occur.
< DAY&NIGHT > MODE
D&N AUTO
D N (CDS)D N (DELAY)N D (CDS)N D (DELAY)RETURN
| | 206|▪I▪▪▪| 3|▪▪▪I▪| 180|▪I▪▪▪| 3RET
▪▪▪I▪
B&W
IR SMARTRETURN
ONRET
MAIN MANU
LENSEXPOSUREBACK LIGHTWHITE BALDAY&NIGHTIMAGEFUNCTIONSYSTEMEXIT
DC
OFFATWAUTO
SAVE&END
The DAY&NIGHT menu is used to configue the day and night related setting for the camera.
15
The IMAGE menu provides the ability to adjust the SHARPNESS, LSC and D-EFFECT functionsof the camera.
1) SHARPNESS Adjust the SHARPNESS level. ▶ OFF, AUTO (0 - 10)2) LSC Select the lens Lens Shading Compensation. ▶ ON, OFF3) D-EFFECT FREEZE Select real or still mode ▶ ON, OFF
MIRROR Select OFF, MIRROR, V-FLIP, ROTATE NEG. IMAGE Select Negative image mode ▶ ON, OFF
IMAGE
SHARPNESSLSCD-EFFECTRETURN
AUTOOFF
RET
MAIN MANU
LENSEXPOSUREBACK LIGHTWHITE BALDAY&NIGHTIMAGEFUNCTIONSYSTEMEXIT
DC
OFFATWAUTO
SAVE&END
< SHARPNESS >
IMAGE
SHARPNESSLSCD-EFFECTRETURN
AUTOOFF
RET
SHARPNESS
LEVELSMART AGCEND AGCRETURN
|▪▪I▪▪| 5|▪▪▪I▪| 128|▪▪▪I▪| 160RET
< D-EFFECT >
IMAGE
SHARPNESSLSCD-EFFECTRETURN
AUTOOFF
RET
D-EFFECT
FREEZEMIRRORNEG. IMAGERETURN
OFFOFFOFFRET
16
1) DNR 2D3D
Select Digital Noise Reduction.▶ OFF, LOW, MIDDLE, HIGH▶ OFF, LOW, MIDDLE, HIGH
2) MOTIONSELECTDISPLAYSENSITIVITY
Detects the Motioned Object in the image. ▶ ON, OFF
ALARM
DEFAULT
Select the Motion area ▶ AREA1 - AREA4Adjust the Motion area window position & sizeAdjust the Motion sensitivity level ▶ 0 - 100
Select the Motion alarm
Initialize the setting values
3) PRIVACYSELECTDISPLAY
COLOR
Hide an area you want to hide on the screen.
TRANSDEFAULT
Select the privacy zone ▶ AREA1 - AREA4Adjust the Privacy window type, position & size▶ OFF, INV., MOSAIC, COLORSelect the privacy zone color ▶ WHITE - USER
Initialize the setting values
4) DEFECT DETLIVE DPC
WHITE DPC
START
Compensates for bad pixels.
LEVELAGC
Select the Live DPC mode ▶OFF, ON
Select the White DPC mode ▶ OFF, ON
Start the white pixels correction
Select the White DPC level ▶ 0 - 60Select the AGC Level ▶ 0 - 14
SENS-UP Select the Sens-up level ▶ x2 - x30
< >FUNCTION
DPC VIEW ▶ OFF, ON
POS/SIZE Adjust the White DPC area window position & size
BLACK DPC Select the Black DPC mode ▶ OFF, ON
START
LEVEL
Start the Black pixels correction
Select the Black DPC level ▶ 0 - 100DPC VIEW ▶ OFF, ON
POS/SIZE Adjust the Black DPC area window position & size
COLOR Select the motion area color ▶WHITE - Red, Green, BlueTRANS Select the motion area transparency.▶1.0, 0.75, 0.5, 0.25
and
VIEW TYPE Select view type of the Motion area ▶ OFF, BLOCK, OUTLINE, ALLOSD VIEW Select the Motion OSD view ▶ OFF, ONTIME Select the Motion Alarm time ▶ 1 - 15
Select the privacy zone transparency ▶ 1.0, 0.75, 0.5, 0.25
AGC LEVEL Select the AGC level ▶ 0 - 255LEVEL Select the Live DPC level ▶ 0 - 100
FUNCTION
DNRMOTIONPRIVACYDEFECT DETRETURN
OFFOFF
MAIN MANU
LENSEXPOSUREBACK LIGHTWHITE BALDAY&NIGHTIMAGEFUNCTIONSYSTEMEXIT
DC
OFFATWAUTO
SAVE&END
17
<DNR>
<MOTION>
DNR
2D3DRETURN
MIDDLEMIDDLEOFF
FUNCTION
DNRMOTIONPRIVACYDEFECT DETRETURN
OFFOFF
RET
FUNCTION
DNRMOTIONPRIVACYDEFECT DETRETURN
OFFOFF
RET
< >PRIVACY
PRIVACY
SELECTDISPLAYCOLORTRANSDEFAULTRETURN
AREA1COLORWHITE1.0 RET
FUNCTION
DNRMOTIONPRIVACYDEFECT DETRETURN
OFFOFF
RET
< >DEFECT DET
DEFECT DET
LIVE DPCWHITE DPCBLACK DPCRETURN
ONONOFF RET
FUNCTION
DNRMOTIONPRIVACYDEFECT DETRETURN
OFFOFF
RET
MOTION
SELECTDISPLAYSENSITIVITYCOLORTRANSALARMDEFAULTRETURN
AREA1ON |▪I▪▪▪| 10WHITE1.0
RET
DEFECT DET
LIVE DPCWHITE DPCBLACK DPCRETURN
ONONOFF RET
LIVE DPC
AGC LEVELLEVELRETURN
|▪I▪▪▪| 4|▪I▪▪▪| 2RET
WHITE DPC
POS/SIZESTARTDPC VIEWLEVELAGCSENS-UPRETURN
OFF|▪▪▪▪| 4|▪▪▪▪| 14X2RET
DEFECT DET
LIVE DPCWHITE DPCBLACK DPCRETURN
ONONON RET
BLACK DPC
POS/SIZESTARTDPC VIEWLEVELRETURN
OFF|▪▪▪▪| 100RET
CLOSE THE IRISTHEN
PRESS ENTERWAITING...
18
SYSTEM
The IMAGE menu provides the ability to adjust the CAM TITLE, RS485, MONITOR, CVBS CROP, VIDEO OUT, LANGUAGE and VERSION functions of the camera.
1) CAM TITLE Maximum of 15 characters are allowed.
2) MONITORLCD
BLUE GAIN
Select the Monitor type ▶ LCD, CRT
RED GAINGAMMA
Adjust the Blue gain level ▶ 0 - 100Adjust the Red gain level ▶ 0 - 100Select the gamma level ▶ USER, 0.45 - 1.0
CRTBLUE GAINRED GAINGAMMA
Adjust the Blue gain level ▶ 0 - 100Adjust the Red gain level ▶ 0 - 100Select the gamma level ▶ USER, 0.45 - 1.0
4) VIDEO OUT Select the video out type ▶ NTSC, PAL
5) LANGUAGE OSD menu LANGUAGE (16ea) ▶ ENGLISH etc.
6) COMET Select the COMET function ▶ OFF, ON
< >SYSTEM
< >CAM TITLE
CAM TITLE
0 1 2 3 4 5 6 7 8 9A B C D E F G H I J KL M N O P Q R S T U VWXYZ▶ → ← ↑ ↓ ()¯ - _■ /=& : ~ , .
← → CLR POS END_ _ _ _ _ _ _ _ _ _
SYSTEM
CAM TITLEMONITORVIDEO OUTLANGUAGECOMETRETURN
OFFLCD NTSCENGLISHOFFRET
MAIN MANU
LENSEXPOSUREBACK LIGHTWHITE BALDAY&NIGHTIMAGEFUNCTIONSYSTEMEXIT
DC
OFFATWAUTO
SAVE&END
SYSTEM
CAM TITLEMONITORVIDEO OUTLANGUAGECOMETRETURN
OFFLCD NTSCENGLISHOFFRET
19
< >MONITER
LCD
GAMMARED GAINBLUE GAINRETURN
USER|▪▪|▪▪| 69|▪▪|▪▪| 60RET
EXIT
The EXIT menu provides the ability to adjust the RESET, SAVE & END and NOT SAVE functionsof the camera.
1) EXITRESET Factory initialization of camera settings
SYSTEM
CAM TITLEMONITORVIDEO OUTLANGUAGECOMETRETURN
OFFLCD NTSCENGLISHOFFRET
SAVE & END Save and exit menuNOT SAVE Exiting the menu without saving
20
760g146x 106mm(H)
f=2.8 ~ 12mm F1.2 ~ 360 Varifocal Lens, ICR (D&N)
Fixed mount
BNC Connector - AHD, CVBS
LIVE DPC / WHITE DPC / BLACK DPC
CRT / LCD
NTSC / PAL
Video out
Monitor
D-Effect OFF / FREEZE / MIRROR / NEG.IMAGE
Privacy MaskingMotion Detection OFF / ON (4 zone)
LSC (Shading) OFF / ON
Camera Title OFF / ON
OFF / LOW / MIDDLE / HIGH
D-WDR OFF / ON / AUTO
SENS-UP1 ~ 15
1 ~ 100
MAX 4.8 Watts (400mA)
1/2.8" 2.4M Sony CMOS
2000(H) x 1121(V)
1920(H) x 1080(V)
1000 TVL
BNC(AHD high definition video output /CVBS(srarted definition video output)
AUTO, 1/60, FLK ~ 1/50,000 sec
OFF / AUTO (x2, x4, x6, x8, x10, x15, x20, x25, x30)
DC 12V ± 10%
DC Jack
Full HD CAMERA
OSD (Joystick Switch, coaxial communication)
1920x1080@25fps ; 1920x1080@30fpsVideo Frame Rate
Exposure
OFF / BLC / HSBLCOFF / AUTO
BacklightATW / AWC / INDOOR / OUTDOOR / AWBWhite Balance
DNR 2DNR3DNR OFF / LOW / MIDDLE / HIGH
OFF / ON (4 zone)ENG / CHN1 / CHN2 / GER / FRA / ITA / SPA / POL / RUS / POR / NED / TUR / KOR / JPN / HEB / ARB
OFF / AUTO (0 ~ 10)
COMET OFF / ONSave & Exit SAVE & EXIT / NO SAVE / RESET
Over 500m via 75-3 coaxial cableTransmission Distance
CVBS Resolution
Sync. System
Scanning system
Active Pixels
Total Pixels
Image sensor
Power Consumption
Power Source
MODEL
Power
General
Min. illumination
Video Output
1.0 lux(COLOR), 0 lux(BW, IR LED ON)
30 IR LED(850nm)30M
More than 50dB (AGC off)
Distance
IR LEDIR
S/N Ratio
Camera Control
Shutter
AGC
Lens
Function
Brightness
Day & Night
Defog
Language
Video mode
SharpnessDefect Detection
Power input
Lens mountLensOperating temperatureOperating humidity
WeightExternal dimension
Connector&
etc.
DC / MANUAL
AUTO / COLOR / B&W
0 ~ 96% (non-condensing)
IP66Ingress Protection
50303906A
2.5
1.67lb. (760g)
2.20lb. (1.0kg)