50th anniversary catalogwesternwindowsales.com/images/wwsiwebstuff/oldstuff/web...1 cover design by...

COMBO ALUMINUM PRODUCTS EL CAJON, CALIFORNIA

50th Anniversary Catalog

Phone: (619) 447-9200 (800) 457-7500 Fax: (619) 442-4558

Energy Saving

Thresholds Weatherstrip

Door Seals For Doors

www.comboaluminum.com

PRODUCTS SHOWN as dimensioned cross-sectionsare full size profiles, unless noted, and are sufficiently accurate tobe used as templates. Perspective drawings are not to scale,but are included to indicate installation methods.Installation practices vary considerably among geographic areasand the final authority for installation rests with the constructionprofessional. Product information at the beginning of eachsection pertains to the products shown within that section unlessotherwise noted.

PRODUCTS ARE PROVIDED with required holesand fasteners included in the cost. In general, #10 size fastenersof popular length are provided with thresholds, sills and saddles.Number 6 size fasteners are provided for door bottoms andweatherstrips. Fasteners are color matched to the productfinish. Anchors and anchor fasteners for special applicationsare available (extra cost). See page 54.

PRODUCTS AND PRODUCT DESIGNS ARE SUBJECT TOCHANGE WITHOUT NOTICE.PRICES AND TERMS ARE SUBJECT TO CHANGE BYNOTIFICATION IN PUBLISHED PRICE LIST.

STEEL PRODUCTS are manufactured from cold-rolled lowcarbon steel and painted in a primer coat.SEALING - GASKETING MATERIALSVINYLS are provided in standard and/or low temperaturegrades, depending on application, compounded from B.F.Goodrich ‘Geon’ flexible homopolymer resin.SANTOPRENE ® is an advance thermoplastic elastomerfrom Monsanto having outstanding properties of UV stabilityand flame retardance.TPR Thermoplastic Rubber combines the versatility ofrubber with high durability properties.THERMAL BREAK MATERIALS for improved energyconservation may consist of wood, rigid PVC, ABS, or highdensity solid polyurethane integral to the aluminum.SPECIAL WEATHERSTRIP PRODUCTS manufacturedby others are supplied in materials proprietary to thosemanufacturers.

AVAILABILITY, STANDARDS and PRICINGMaterials and components for the manufacture of productsshown in this catalog are maintained in inventory andfabricated for prompt shipment.Specific information pertaining to the industry standardof over-cut and under-cut lengths are explained at thebeginning of each catalog section.Pricing, terms of sale, and shipping allowance informationis published in the Price List which is available upon request.

CERTIFICATIONProducts of aluminum are warranted for three years againstdefects in materials or workmanship, Non-metallic materialsare guaranteed for ninety days. Warranty applies only toproducts used in applications for which the product isintended, and installed in an accepted workmanship manner.Defective materials will be replaced or repaired at our option.No claims for damage incurred or work done thereon shall beallowed.

Printed 2008

MATERIALS

General Information & Index..................1. Door Bottoms and Seals.........................2. Combination Sill-Thresholds................3. Fabrication Options..................................4. Accessories...............................................5. Residential Thresholds.......................6. Insulated Sill-Thresholds....................7. "Outswing" Thresholds.......................8. Commercial Saddle Thresh.................9. Jamb Weatherstrip...............................10. Astragals and Meeting Stiles..............11. Miscellaneous...........................................12. Replacement Seal Inserts........................13. Security Door Components.....................14. Metal Mouldings & Floor Trim.............

S E C T I O N SS E C T I O N SCONTENTS

PAGES1-23-8

9-171819

20-2425-3435-3839-4344-4748-53

545556

57-58

Cover Design by [email protected]

Dear Valued Customer,

COMBO ALUMINUM PRODUCTS was founded in El Cajon, California in 1959 by Mr. Wally Miller, then known as the W.W. Miller Company. Mr. Miller designed and patented the original Combo Sill, from which we get our name today.

In 1970 the company was purchased by John Hartman. Under John Hartman's ownership through the 70's, 80's, and 90's Combo experienced muchgrowth and expansion.

In 2001, I purchased the company and have enjoyed the opportunity to continue to expand and develop Combo, keeping a majority of the long servingstaff in place. This is the primary reason that Combo has been one of the leaders in our industry in the area of product development and customer service.

Our staff, over our fifty year history, has taken a tremendous amount of pride in maintaining our claim and long time goal of Servicing, Innovating, andbeing Cutting Edge. Thank you for allowing us to be of service to you over the past fifty years.

Sincerely,

Bill CornthwaitePresident & CEO

ALUMINUM PRODUCTS are manufactured from 6063-T5extruded aluminum. Aluminum finishes are listed under"Ordering Information" on page 2.

When ordering please state

1) QUANTITY - number of pieces.2) PART NUMBER3) FINISH (A, B, BA, CH, G, PG, S, W) see below.4) PACKAGING (BK, PR, PS, PT) see below.5) SIZE / LENGTH (36”, 80”, 72”, etc.) see below.6) FABRICATION (Options page 7, 18, & 40).

FINISHESMost extruded aluminum products are available in the following finishes/coatings:

PACKAGING SYMBOLS BK BULK - No wrap or label. All fasteners in one bag. Individual packs of fasteners available at extra cost. PR POLY RETAIL - Clear poly (usually shrink wrap), with label & fasteners suitable for retail display. Bar coding on labels is available. If you have any bar code requirements, please inquire (UPC code A). PS POLY SLEEVE - Six-mil poly sleeve (open on each end). The poly sleeve should remain on the sill for protection during assembly and installation into the structure through the final phases of construction. All fasteners are in one bag. Individual packs of fasteners are available at extra cost.

PT PROTECTIVE TAPE - Tape applied to Hardwood for wood protection. also used on all aluminum adjustables.

SIZE - LENGTHIf special sizes are required, please specify at time of ordering. Standard sizes (ie, 30”, 32”, 36”, etc.) are cut over, under, or exact, as detailed in section headings for that specific product.

FABRICATIONAll products are cut to standard size, punched with required holes and provi-ded with seal (as illustrated). Additional fabrication may be ordered as follows:DOOR BOTTOMS - Stop cut, 3 degree bevel & weep holes. See page 7.SILLS-THRESHOLDS / COMMERCIAL SADDLES - Rout for nail-on applications, rout for metal / mortised frame, mullion rout, sill trim notch, tabs, or “no-holes” (pages 18 & 40).ASTRAGALS - Punch out for dead bolt, stop cut.

PLEASE TAKE NOTEAny variance from standard preparation procedures must be noted at the timeof ordering. Standard procedures, in addition to the above, are described atthe beginning of each product section. Fabrication Options are illustrated on page 7, 18, & 40.

A

BAB

CHGPGSW

ALUMINUM MILL FINISH - as extruded condition.

BRITE ALUMINUM - available on selected wallboard trims &edge facing.

BRONZE ANODIZE - bronze color anodizing process.

CHAMPAGNE - anodize to complement satin - nickle hardware.GOLD ANODIZE - gold color anodizing process (Floor Trim only).BRIGHT GOLD - a chemically brightened gold anodizing process.CLEAR SATIN ANODIZE - clear anodize with light etch.WHITE - a baked electrostatic coating or a powder coat according to product service requirement.Floor trim products come in hammered finishes only.

ORDERING INFORMATION PART NUMBER INDEX

COMBO ALUMINUM PRODUCTS, EL CAJON, CA1100 North Johnson Avenue, El Cajon, CA 92020

Tel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558 22

100 …. 3

423 …. 36 977 …. 32 5500 …. 52

101 …. 3424 …. 36 1000 …. 44 5600 …. 53

150 …. 3427 …. 36 1004 …. 44 5700 …. 53

151 …. 3428 …. 36 1050 …. 47 6100 …. 56

200 …. 3450 …. 37 1052 …. 47 6104 …. 56

201 …. 3451 …. 37 1053 …. 47 6116 …. 56

205 …. 6457 …. 37 1056 …. 47 6118 …. 56

206 …. 6458 …. 37 1120 …. 48 6134 …. 56

208 …. 8470 …. 38 1130 …. 48 6138 …. 56

209 …. 8471 …. 38 1143 …. 47 6144 …. 56

210 …. 8472 …. 38 1152 …. 48 7100 …. 57

211 …. 8520 …. 10 1160 …. 48 7130 …. 57

213 …. 6522 …. 10 1201 …. 48 7150 …. 57

214 …. 8525 …. 10 1430 …. 47 7160 …. 57

215 …. 8526 …. 10 1502 …. 39 7170 …. 57

217 …. 8535 …. 11 1503 …. 39 7200 …. 57

219 …. 8537 …. 11 1504 …. 39 7210 …. 57

220 …. 5542 …. 17 1505 …. 39 7220 …. 57

221 …. 5550 …. 11 1506 …. 39 7230 …. 57

222 …. 5551 …. 11 1507 …. 39 7300 …. 57

223 …. 5558 …. 19 1510 …. 43 7310 …. 57

224 …. 5559 …. 19 1511 …. 42 7320 …. 57

225 …. 5560 …. 12 1512 …. 42 7360 …. 57

226 …. 5561 …. 12 1514 …. 42 7400 …. 57

227 …. 5564 …. 12 1515 …. 42 7410 …. 57566 …. 12 1516 …. 40 7420 …. 57

232 …. 7 569 …. 13 1517 …. 40 7430 …. 57233 …. 7 580 …. 13 1518 …. 40 7600 …. 58234 …. 7 581 …. 13 1519 …. 41 7610 …. 58240 …. 7 585 …. 14 1520 …. 40 7620 …. 58241 …. 7 586 …. 14 1522 …. 42 7640 …. 58242 …. 7 650 …. 14

1544 …. 411529 …. 41 7650 …. 58

243 …. 7 651 …. 141545 …. 41

7660 …. 58244 …. 7 652 …. 15

1546 …. 417670 …. 58

245 …. 7 653 …. 151547 …. 41

7680 …. 58246 …. 7 660 …. 15

1550 …. 437690 …. 58

249 …. 6 661 …. 151552 …. 43

7700 …. 58250 …. 3 675 …. 16

1564 …. 437710 …. 58

251 …. 3 676 …. 161750 …. 45

7720 …. 58252 …. 4 680 …. 16

1751 …. 457730 …. 58

253 …. 4 681 …. 161783 …. 45

7790 …. 58255 …. 7 757 …. 31

1784 …. 457800 …. 58

256 …. 4 775 …. 171785 …. 45

7810 …. 58257 …. 4 776 …. 17

1786 …. 457820 …. 58

260 …. 4 777 …. 311787 …. 45

7830 …. 58261 …. 4 820 …. 25

1788 …. 457850 …. 58

263 …. 6 822 …. 251810 …. 46

7880 …. 58264 …. 6 823 …. 25

1811 …. 467900 …. 58

265 …. 6 825 …. 281820 …. 46

9007 …. 55266 …. 6 827 …. 30

1825 …. 479008 …. 55

267 …. 6 830 …. 281826 …. 47

9009 …. 55268 …. 6 831 …. 33

1830 …. 479010 …. 55

273 …. 6 834 …. 331835 …. 47

9011 …. 55280 …. 4 835 …. 29 9012 …. 55281 …. 4 836 …. 33 1950 …. 46 9017 …. 55300 …. 21 839 …. 29 1951 …. 46 9019 …. 55301 …. 21 840 …. 29 1952 …. 46 9020 …. 47304 …. 22 841 …. 26 3007 …. 20 9021 …. 47305 …. 22 842 …. 26 3008 …. 20 9022 …. 47322 …. 21 843 …. 26 3017 …. 20 9023 …. 47324 …. 21 844 …. 28 3019 …. 20 9024 …. 47332 …. 22 845 …. 29 3104 …. 19 9031 …. 55340 …. 22 846 …. 33 3109 …. 19 9032 …. 55341 …. 23 847 …. 30 3111 …. 38 9050 …. 55342 …. 23 849 …. 30 3116 …. 19 9060 …. 56345 …. 23 850 …. 27 3212 …. 44 9081 …. 55347 …. 23 852 …. 27 3218 …. 44 9082 …. 55355 …. 24 854 …. 27 3727 …. 34 9086 …. 55357 …. 24 855 …. 27 3747 …. 34 9088 …. 55360 …. 24 856 …. 30 3757 …. 34 9089 …. 55362 …. 24 857 …. 31 3777 …. 34 9100 …. 54378 …. 21 858 33 & 54 4010 …. 54 9101 …. 54410 …. 35 877 …. 31 5000 …. 49 9102 …. 54412 …. 35 927 …. 32 5100 …. 49 9103 …. 54415 …. 35 947 …. 32 5400 …. 50 9104 …. 54417 …. 36 948 …. 33 5450 …. 50

Replacement419 …. 36 957 …. 32 5475 …. 51Vinyl …. 55

Section 1 DOOR BOTTOMS & SEALS

For 1-3/4” Doors

Door Bottoms are extrudedaluminum with either doublevinyl seal or wide fingervinyl seal.

Standard Size are 30”, 32”,36”, 42” & 48” and are cut1/4” under unless noted.

Other lengths may beordered, and are cut exact.

Door Bottoms have slottedholes for close adjustment.SMS 6 x 5/8” phillips panheadstainless steel screws areincluded. Indicates location of standard fastener hole.

THERMAL BREAK doorbottoms are shown onpages 4 & 5.

Color of sealing material isblack. Made from virgin,flexible extruded vinyl.

Replacement sealingmaterials are available andsold by the foot (Page 55).

Custom fabrications - Stopcuts & 3 degree bevel - areavailable to assist installation.See page 7 for detail.

Typical clearance betweendoor and threshold is 3/8”.Check before installation.

Some Door Bottoms have adrip cap to direct rain waterrun-off. Weep holes are avail.

Threshold and DoorBottoms can be ordered inpackaged sets.

Closure strips with a reachup to 1-1/4” (page 8).

Automatic Door Bottomsare available in both SurfaceMount and Mortise types.

Part #255 is designed forhollow metal doors (page 7).

250A, B, CH, PG, W

3/8

3/4411/ 11/4

3/8

251

/43

11/41

3/8

151

11/4

3/8

1

150

11/43/4

3/8

201

11/43/4

3/8

200A, B

11/43/4

3/8

101A, B

11/43/4

3/8

100A, B

FOR 1-3/8” DOORS

A, B

A, B A, B

A, B, CH, PG, W

COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558PRODUCTS ARE SHOWN ACTUAL SIZE3

continued

253A, B

FOR 1 3/4 DOORS11/4

3/4

1/2

252

FOR 1 3/4 DOORS

A, B

11/43/4

1/2

2811/4115/16

3/8

A, B, CH, PG280

1/4115/16

3/8

A, B257

3/8

1/411/161

FOR 1 3/4” DOORS

A, B256

3/8

1/411/161

FOR 1 3/4” DOORS

261

11/4

3/8

11/4

A, B, CH, PG, W260

A, B, CH, PG, W

11/4

3/8

11/4

Indicates location of standard fastener hole.

UNIVERSAL DOOR BOTTOMS

FOR 2-1/4” DOORS

THERMAL BREAK DOOR BOTTOMS

Door Bottoms & Seals

A, B, CH, PG

COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558 PRODUCTS ARE SHOWN ACTUAL SIZE 4

Door Bottoms & Seals continued

A, B222

3/8

23/4

A, B223

3/8

23/4

23/4

3/8

A, B, W221

A, B, W220

23/4

3/8

Features:Combination DoorBottom & Kick Platewith a drip cap.

Thermal Break isrigid PVC.

Slotted holes onboth sides.

w/o Drip Cap w/ Drip Cap

3/8

23/4

FOR1 3/4”

DOORS

226A, B

3/8

23/4

FOR1 3/4”

DOORS

225A, B

3/8

23/4

224

FOR1 3/4”

DOORS

A, B

3/8

23/4A, B

227

THERMAL BREAK DOOR BOTTOMS

FOR1 3/4”

DOORS

FOR 1 3/4” DOORSFOR 1 3/4” DOORS

COMBINATION KICK PLATE AND DOOR BOTTOM

FOR 1 3/4” DOORSFOR 1 3/4” DOORS

Indicates location of standard fastener hole.COMBO ALUMINUM PRODUCTS, EL CAJON, CA

Tel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558PRODUCTS ARE SHOWN ACTUAL SIZE

(EXCEPT AS NOTED)5

THESE DRAWINGS NOT TO SCALE

continuedDoor Bottoms & Seals

265 265 32” Length, Brown266 36” Length, Brown

1/ 2

1/ 2

1 3/4

263 263 36- ” Length, Brown264 48- ” Length, Brown

1 3/4

9/16

PVC DOOR BOTTOM (Dual Durometer)

For 1-3/4” door - attaches with staples, nails, or screws. (Not furnished)


7 /16

2

267 267 31-3/4” Length, Brown268 35-3/4” Length, Brown

1 1/43/4

9/16

A, B (Cut Exact)206

7/16

Mortise installation shown.Seal is TPR Rubber.

9/16

3/4

213 (Cut Exact)A, BA, B (Cut Exact)205

1/2

1 3/8 1 3/8

CONCEALED DOOR BOTTOMS

249 A, B, CH, PG, W

Aluminum Door Bottom withdual-durometer PVC Seal

NEW

NEW NEW

PVC Seal will fit: Aluminum Door Bottom with dual-durometer PVC Seal

273 35-3/4” Length, White

For 1-3/4" Doors

For 1-3/4" Doors



3 DEGREE BEVEL STOP CUT

Self-drilling sheet metal screws are provided.

Order: Specify "inswing" or "outswing" door.Bevel door bottom to fit bevelof door.

Removes metal to preventinterference with door stop.

Order: Specify size of stop cut: 1/2”,5/8” or 3/4”.

Removes metal to preventinterference with door stop.

3 deg e ever e b l

255

For 1-3/4” HollowMetal Doors

11/4

3/4

5/16

A, B


DOOR BOTTOM FAB OPTIONS


AUTOMATIC DOOR BOTTOMS

240 24”241 28”242 30”243 32”244 36”245 42”246 48” Finish:

B Bronze AnodizeS Satin AnodizeFinish:

A Aluminum Mill Finish

Mortise type automaticdoor bottom, vinyl seal,3/4” max. drop.

Surface mount automaticdoor bottom, pliable seal,1/2” max. drop.

231 24” - 28”232 30” - 32”233 34” - 36”234 40” - 42”/81 3

9/16

13 /8

1/2



Rain Drip(above door)

11/8

11/2

219 B, S, W

13/8

1/2

Drip Cap

217 A, B

1/2

1 3 /8

5/16

215 A, B

1/2

1 3 /8

7/8

214 A, B


Closure Strips are cut 1/4” over. Slotted holes for close adjustment.SMS 6 x 5/8” phillips-panhead screws are provided.

A, B, W208

21/8

11/4Reach

CLOSURE STRIPS

2 3/16

A, B, CH, PG, W210

1 3/4

A, B, CH, PG, W211

111/16

3/4Reach

A, B, W209


11/4Reach

3/4Reach

Section 2 COMBINATION SILL-THRESHOLDS, the “COMBO SILL”

Standard Sizes: 30”, 32”, 36”, 42”,48”, 60”, 64”, 72” (cut exact).

Other lengths are available.(Extra cost over 73”)Drop In Sills are cut to exact lengthordered.

Center holes are countersunk, 1 perdoor for routed nail-on sill; or,approximately 1 per 12” for drop-in sill.Sills can be ordered without centerholes, if desired.

Special fabrications to easeinstallation with orderinginformation are described onpage 18: Rout for nail-on jambs (3/8” - 1-1/4”) Mullion rout (MR) Rout for metal/mortised frame (RMF) Sill trim notch (SN) Nail-on rabbet

#10 phillips flathead screws areincluded, length per industry standard.

All Combo Sills can be packagedwith any door bottom to create apackaged set.

Sill Covers and Sill Risers are onpage 19.

Special anchors for concrete areavailable at extra cost, see page54.

End Holes are provided with sillsrouted for nail-on jambs.

SILL-THRESHOLD SELECTION GUIDE

520522

535537

525550540542560600650660675

569775

580585652680

5-5/87-3/4

5-1/85-1/8

4-1/455-1/84-9/165-1/85-3/85-3/46-11/166-3/4

5-5/87-3/4

55-1/85-3/46-13/16

1-3/81-3/8

5/85/8

1-1/81-1/81-1/81-1/81-1/81-1/81-1/81-1/81-1/8

1-1/41-1/4

1-3/81-3/81-3/81-3/8

4-3/8 to 5-1/26 to 7-1/8

4-1/8 to 54-1/8 to 5

3-3/4 to 4-1/83-5/8 to 4-7/84-1/4 to 54-1/8 to 54 to 4-7/84 to 5-1/84-3/8 to 5-1/25-1/2 to 6-1/25 to 6-1/4

4-3/8 to 5-1/26 to 7-1/8

3-5/8 to 4-7/84 to 4-7/84-3/8 to 5-1/25-1/2 to 6-1/2

55

55

996669969

69

9999

NOTE: Each profile also available for continuous level floor.

PROD# WIDTH HEIGHT SLOPE JAMB

COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-45589

continuedCombination Sill-Thresholds

A, B

For jambs:3-3/4” to 4-1/8” wide.Continuous level floor.10 x 1-3/4” phillipsflathead screwsare included.

526

4 1/4

11/8

For jambs:3-3/4” to 4-1/8” wide.10 x 1-3/4” phillipsflathead screwsare included.

525 A, B

4 1/4

11/8

7 3/4

1/2

1 3/8

5 5/8

1/2

1 3/8

522 A

520 A NEW

NEW


o 9 slope

o 9 slope

o 5 slope

o 5 slope

Thermal-Break Threshold for Modular Homes (#520 & #522). Heavy wall thickness for strengthand rigidity. Screw-bosses for attaching to frame (fasteners not included). End Seals available.

THIS DRAWING NOT TO SCALE.


PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED) 10

5

1/81

551

For jambs:3-5/8” to 4-7/8” wide &continuous level floor.10 x 1-3/4 phillipsflathead screwsare included.

A, B, CH, PG, W

550

For jambs:3-5/8” to 4-7/8” wide.10 x 1-3/4” phillipsflathead screwsare included.

A, B, CH, PG, W1

5

The Original Combo-Sill


5 1/ 8

1/8

537 A, B

For jambs 4-1/8” to 5”wide & continuous levelfloor. For doors 1-3/4” andover. Screws boss isprovided for attachment tojambs. 10 x 1-1/4” phillipsflathead screws are included.

535 A, B5/ 8

5 / 8

5 1/ 8

For jambs:4-1/8” to 5” wide.For doors 1-3/4” andover. 10 x 1-1/4” phillipsflathead screwsare included.


o 9 slope

o 9 slope

o 5 slope

o 5 slope



For jambs:4” to 4-7/8” wideFor doors 1-3/4” and over. 10 x 1-3/4”phillips flatheadscrews are included.

560 A, B

1/81

5 1/8

561 A, B

5

1/81

1/8

For jambs:4” to 4-7/8” wide &continuous level floor.For doors 1-3/4” andover. 10 x 1-3/4”phillips flatheadscrews are included.

6 11/16

1 3/8

1 3/8

4 11/16

564 A

For jambs:4-1/8” to 5” wide.

566 A

For jambs:5-1/2” to 6-1/2” wide.

NEW

NEW


o 5 slope

o 5 slope

o 6 slope

o 6 slope



For jambs:3-5/8” to 4-7/8” wide &continuous level floor.10 x 2-1/2” phillipsflathead screwsare included.

5

3/81

580For jambs:3-5/8” to 4-7/8” wide.10 x 2-1/2” phillipsflathead screwsare included.

A, B

581 A, B

1 3 /8

5

1 1/4

5 5/ 8

569 B

For jambs:4-3/8” to 5-1/2” wide.


o 9 slope

o 9 slope

o 6 slope


Combination Sill-Thresholds

For jambs:4-3/8” to 5-1/2”wide. 10 X 1-3/4”phillips flatheadscrews areincluded.

5

1/81

3/4

5 3/4

continued

1/81For jambs:4-3/8” to 5-1/2” wide& continuous levelfloor. 10 X 1-3/4”phillips flatheadscrews are included.

585 A, B

3/81

1/85

For jambs:4” to 4-7/8” wide;For doors 1-3/4” andover. 10 x 2-1/2” phillipsflathead screwsare included.

586 A, B

650 A, B

651 A, B

3/81

1/85

For jambs:4” to 4-7/8” wide &continuous level floor.For doors 1-3/4” andover. 10 x 2-1/2” phillipsflathead screwsare included.


o 9 slope

o 9 slope

o 9 slope

o 9 slope


For jambs: 5 1/2" to 6-1/2" wide. 6 slope.For doors 1-3/4" and over. 10 X 1-3/4" phillipsflathead screws are included.


For jambs:4-3/8” to 5-1/2” wide.10 X 2-1/2” phillipsflathead screws areincluded.

652 A, B

1 3 /8

1 3 /8

5 3/4

For jambs:4-3/8” to 5-1/2” wide& continuous levelfloor. 10 X 2-1/2”phillips flatheadscrews are included.

653 A, B

660 A, B

5 3/4

6

1/81

11/16

o

For jambs: 5 1/2" to 6-1/2" wide. 6 slope.For doors 1-3/4" and over. 10 X 1-3/4" phillipsflathead screws are included.

o

6

1/81

11/16


o 9 slope

o 9 slope


661 A, B


6

1/81

3/4

675 A, B

o

6

1/81

3/4

6

3/81

13 /16


For jambs: 5" to 6-1/4" wide. 9 slope.10 X 1-3/4" phillips flathead screws areincluded.

oFor jambs: 5" to 6-1/4" wide & continuouslevel floor. 9 slope. 10 X 1-3/4" phillipsflathead screws are included.

oFor jambs: 5-1/2" to 6-1/2" wide. 9 slope.For doors 1-3/4" and over. 10 X 2-1/2" phillipsflathead screws are included.

oFor jambs: 5-1/2" to 6-1/2" wide & continuouslevel floor. 9 slope. For doors 1-3/4" and over.10 X 2-1/2" phillips flathead screws are included.

6

3/81

13 /16


676 A, B

680 A, B

681 A, B


542 A, B

Full length composite insert for glue down or nail-on applications

1 1/ 8

4 9/16

For jambs:4-1/8” to 5” wide.For doors 1-3/4” and over .Will accept extenders834, 836, & 846shown on page 31.

INSERT SILL-THRESHOLDCOMPOSITE & WOOD SUBSTRATE AVAILABLE


775

7

1/41

3/4

A, B

1/41

7 3/4

THIS DRAWING NOT TO SCALE


oFor jambs: 6" to 7-1/8" wide. 9 slope. For doors 1-3/4" and over. 10 X 1-3/4" phillips flathead screws included.

oFor jambs: 6" to 7-1/8" wide. 9 slope. For doors 1-3/4" and over. 10 X 1-3/4" phillips flathead screws included.

o6 slope


PRODUCTS ARE SHOWN ACTUAL SIZE(EXCEPT AS NOTED)17

776 A, B

Section 3 FABRICATION OPTIONS for “COMBO SILLS”

NAIL-ON ROUT NAIL-ON RABBET

SILL NOTCH (SN)

MULLION ROUT (MR)

ROUT FOR METAL FRAMES (RMF)

DROP IN STANDARD (NO FAB)

For wood doorframes, usingnails or staplesto attach doorjambs to theCombo Sills (nailholes provided).

For wood doorframes, usingnails or staplesto attach jambsto the ComboSills (nail holesprovided).

Installation:Jamb must be cut to matchslope of sill. (Eg. 6 degrees)Cut left and right jamb.

Order:Rout Sizes:

Holes:

SN is a millingoperation to fit the sillaround the frame or trimmolding.

Order: Dimensions of notch required (ie: ”A”, “B” and “C”).

Holes: Three (3) center holes per door.

RMF is a millingoperation to removealuminum, enablingthe threshold to be“dropped” intoplace.

Order: Exact length required. Specify stop size, and "inswing" or "outswing" door.Holes: Three (3) center holes per door.

Installation: Door stop on rabbet jambmust be cut to match slope of sill.(5, 6, or 9 degrees). Cut left and right jamb.

Order: Exact length required.Holes: One (1) center hole per door. Two (2) end holes. Specify location.

For shop assembly ofdoor, frame, andlites prior toinstallationon the job.Ensures morepositive attachmentbetween sill an jamb.

Order: Exact length required and placement of rout from the outside looking in.Holes: One (1) center hole per door.

Order: Exact Sill length.Holes: Three (3) center holes per door .

C

Door opening plus rout size.R3 = 3/8”, R4 = 1/2”, R6 = 3/4”,R7 = 7/8”, R8 = 1”, R9 = 1-1/8”,R10 = 1-1/4”One (1) center hole per door.Three (3) nail end holes.

B

A

The Combo Sill, a combination sill and threshold,and other threshold products can be customized fora variety of applications. The most commonly usedfabrications are illustrated below, and include the

appropriate ordering information. Center holes arecountersunk. Sills can be ordered without centerholes, if required. Illustrations are not to scale.See price list for fabrication cost.

COMBO ALUMINUM PRODUCTS, EL CAJON, CATel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558 18

Section 4 ACCESSORIES

Used to extend COMBO sills, in order to cover exterior foundation beyond threshold.

2

1/2

3 /4

13104

Narrow sill coverLevel sill cover

3116

A, B, CH, W559A, B, CH

3109A, B,

A, B, CH, W

A, B, CH, PG, W

35 /32

1/2

Wide sill cover.

4

3 / 4 1

1 / 2

10 x 1-1/2”Phillips flatheadscrews areincluded.

2

3/8

2

5/8

Sill Covers: Standard Sizes - 30”, 32”, 36”, 42”, 48” (cut 3/8” over); 60”, 64”, 72”(cut 1” over). Other lengths are available and are cut exact as ordered. (Extra cost over 73”)No holes or fasteners are provided.

Sill Risers: Sill risers are cut exact. Center holes are countersunk. #10 sheet metal screws areprovided.

SILL COVERS

Used to increase the height of Combo Sill-Thresholds, to accommodate a change infloor covering thickness. Will fit most Combo Sill-Thresholds, pages 10-17. Cut Exact.

SILL RISERS

10 x 1-1/4”Phillips flatheadscrews areincluded.

558

Indicates location of standard fastener hole.COMBO ALUMINUM PRODUCTS, EL CAJON, CA

Tel (619) 447-9200 (800) 457-7500 Fax (619) 442-4558PRODUCTS ARE SHOWN ACTUAL SIZE19

Section 5 RESIDENTIAL THRESHOLDS

3007A, B, PG

Low rug threshold with vinyl moisturebarrier. 10 x 1-1/2” phillips flatheadscrews are included.

3008

High rug threshold with vinyl moisturebarrier. 10 x 1-3/4” phillips flatheadscrews are included.

3017A, B

Extra high rug threshold with vinylmoisture barrier. 10 x 2” phillipsflathead screws are included.

3019A, B

Max high rug threshold with vinylmoisture barrier. 10 x 2-1/2”phillips flathead screws are included.

Indicates location ofstandard fastener hole.

1/23

5/8

4

1

4

1/41

4

11/161

A, B

Thresholds are extruded aluminum.

Standard Sizes (Product is cutoversize to allow “cutting in”):30”, 32”, 36”, 42”, 48” (cut 3/8”over); 60”, 64”, 72” (cut 1” over).

Other lengths are available andare cut exact. (Extra cost over73”)

Thresholds routed for metal framesare cut exact. Specify special

requirements at time of ordering.

Center holes are counter-sunk.#10 phillips flathead screws areincluded.

Special anchors may be requiredon concrete slab construction &are available at extra cost, seepage 54.

Above specifications do not applyto Hardwood Thresholds, page 24.

Sealing material, both moisturebarrier and door seal is madefrom virgin, flexible extruded vinyland exceeds requirementsspecified in commercial standardCS 230-60. Vinyl color is black.

All Combo Thresholds can bepackaged with any door bottomto create a packaged set. Seepages 3 - 8 for Door Bottomselection.



continuedResidential Thresholds

378A, B

Applicable for entry or rug to rug application.With vinyl moisture barrier. Floor coveringnot to exceed 1-1/2”. 10 x 2-1/2” phillipsflathead screws are included.

1/23

11/2

301A, B

High rug, contemporary design withwater dam and vinyl moisture barrier.Center leg for extra support. 10 x 1-1/2”phillips flathead screws are included.

1/161

4

Low rug, contemporary design with water damand vinyl moisture barrier. Center leg for extrasupport. 10 x 1-1/4” phillips flathead screwsare included.

300A, B 5/8

3 1/2

324A, B

High rug threshold with a smooth vinylinsert and vinyl moisture barrier. 10 x 1-3/4”phillips flathead screws are included.

3 3/4

1 1/8

322A, B

Low rug threshold with a smooth vinylinsert and vinyl moisture barrier. 10 x 1-1/2”phillips flathead screws are included. 3 3/8

5/8


WATER RETURN THRESHOLDS


Squareback threshold for butting up tofloor covering. Moisture barrier sealis made from virgin, flexible extruded vinyl.10 x 2” phillips flathead screws areincluded.

332A, B, CH

Designed specifically for 3/8” tile entry.Moisture barrier seals are made fromvirgin, flexible extruded vinyl. 10 x 2”phillips flathead screws are included.

305A, B

1/41

3/43

3/8"TILE

304A, B

Designed specifically for 5/8” tile entry.Moisture barrier seals are made fromvirgin, flexible extruded vinyl. 10 x 2”phillips flathead screws are included.

1/41

3/43

5/8"TILE

THRESHOLDS FOR TILE ENTRY

SQUAREBACK THRESHOLD

Indicates location ofstandard fastener hole.

5/32” weep holes1 9/16

4

340A, B, CH

Water return threshold - designed to catchrain water which may blow or run under thedoor and return it to the outside throughstaggered weep holes. 10 x 2-1/2” phillipsflathead screws are included.

4

1 1/4




6° slope

1 1/8

1 5/8

4 9/16

WEEP HOLES 3/16" DIA.

1 1/8

1 5/8

6 9/16

6° slope

WEEP HOLES 3/16" DIA.

1 5/8

1 1/8

5 5/8

1 1/8

1 5/8

7 11/16

3/16" DIA.WEEP HOLES

3/16" DIA.WEEP HOLES

NEW

NEW

NEW

NEW342 A, B

341 A, B

A, B, CH345

A, B, CH347

WATER-RETURN INSWING BUMPER thresholds designed to prevent water penetration. Residual water is returned outside through weep holes. Full length composite insert for glue-down or nail-on applications.End Seals included.





1/2

3/4

3

1

13 /16

3/41

3 /8

1/23

5/8

1/23

13 /16

3 /8

1/23

5/8

362 37” Length

High rug, Hardwood threshold.With vinyl seal.

357 37” Length

Low rug, Hardwood threshold.With vinyl seal.

360 37” Length

High rug, Hardwood threshold.Full 1-3/4” sealing surface.

355 37” Length

Low rug, Hardwood threshold.

HARDWOOD THRESHOLDS


Section 6 INSULATED SILL THRESHOLDS

THIS DRAWING NOT TO SCALE7 11 / 16

1/81

823A, B

4 9/ 16

1/81

820A, B, CH, PG

822A, B,

1/81

5 5/ 8

FIXED HARDWOOD THRESHOLDSCOMPOSITE OR WOOD SUBSTRATE AVAILABLE

o 5 slope

o 5 slope

o 5 slope



4 9/ 16

1 3/8

1 3/8

5 5/ 8

THIS DRAWING NOT TO SCALE.7 11 / 16

1 3/ 8

843A, B

continuedInsulated Sill-Thresholds

A, B842

841A, B, CH, PG o 5 slope

o 5 slope

o 5 slope




852A, B

2” Extender available. (See page 31)

1/41

5 5 / 8

850A, B

4 9 / 16

1/41

FIXED ABS CAP

3 / 8 1

5 5 / 8

THIS DRAWING NOT TO SCALE.

3 / 8 1

7 11 / 16

NEW

NEW

854A, B

855A, B

o 5 slope

o 5 slope

o 5 slope

o 5 slope




830A, B, CH, PG

844A, B

825A, B

4 9 /16

1/81

3 1/ 2

1 3/ 8

3 1/ 2

1/81

Components:HARDWOOD TRIM - Stapled, replaceable.HARDWOOD CAP - has maximum cross section (over 11/16”) to resist bending and deflection, Adjustable from 1-1/8” to 1-3/8” in height or 1-3/8” to 1-5/8”.

FASTENERS - color coated zinc plated steel fastener engages in zinc plated steel, rivet-type T-nut. T-nut is locked into substrate by a flaring operation.SANTOPRENE ® By Monsanto - dual durometer rubber seal retains memory for a better, longer lasting seal.LEG VINYL - provides additional moisture barrier.SUBSTRATE - Selected products use a dimensionally stable wood product or stable composite material product.SIZES - Up to 144” length (1-1/8” high only).

ADJUSTABLE HARDWOOD THRESHOLDSCOMPOSITE & WOOD SUBSTRATE AVAILABLE

o 5 slope

o 5 slope

o 5 slope



7 11 / 16

1/81

5 5/ 8

1 3/ 8

845A, B

5 5/ 8

1/81

835A, B

840A, B, CH. PG

4 9/ 16

1 3/ 8

839 A, B

o 5 slope

o 5 slope

o 5 slope

o 5 slope





849 A, B


1 3/8

7 11 / 16

Now wi th composi te subst ra te !

827B, S

847B, S

4 9/ 16

1 1/4

1 1/4

4 9/ 16

ADJUSTABLE ALL ALUMINUM THRESHOLDS

3 1/ 2

1 1/4

COMPOSITE OR WOOD SUBSTRATE AVAILABLEAdjustable from 1-1/4” to 1-1/2” in height.

5

856B, S

NEW

o 5 slope

o 5 slope

o 5 slope

o 5 slope



55/8

1 1/4

ADJUSTABLE FROM 1-3/8” TO 1-5/8”

1 1/4

7 11/16

1 3/8

5 5/8

1 3/8

7 11/16

757

777

NEW

NEW


857B, CH, S

877B, CH, S

A, B

A, B

o 5 slope

o 5 slope

o 5 slope

o 5 slope



COMPOSITE CAP / ALUMINUM BODY ADJUSTABLE thresholds designed as a thermal-break.Height adjusts from 1-3/8" to 1-5/8" (1/4").



927B, S

3 1/ 2

1 3/8

55/8

1 3/8

957B, CH, S

947B, S

4 9/ 16

1 3/8


THIS DRAWING NOT TO SCALE.7 11/16

1 3/8

977B, CH, S

o 5 slope

o 5 slope

o 5 slope

o 5 slope



Door Bottom / Cap Combinationto use with side lites for acontinuous look.(See page 54 for illustration.)

ALUMALUMINUMADJ. CAP827, 847,

856, 857, & 877

DOORBOTTOM

ADJ. CAP827, 847,857,877

1 1/4

836 2”B, S

846 3”B, S

B, S

948 B, S

4 9/ 164 9/ 16

1 3/4

Extender ONLY for use with parts # 820, 830, 840,& 841.

A, B, CH, PG

Adjusts from to 2”3/41

Extenders ONLY for use with parts # 542, 822,835, 842, 845, 847, 852, & 947.

834 1”

A, B858831 2”

Woodsubstrateonly.


o 5 slope


3727

3747

3757

3777

For 3-1/2”ThresholdsFor 3-1/2”Thresholds

For 4-9/16”Thresholds




RE-USABLE PVC PROTECTIVE COVERS




THIS DRAWING NOT TO SCALE7

1/41

7/16

Section 7 OUT-SWING DOOR THRESHOLDS

5

1/41

7/16

PLEASE NOTE:“Outswing” Astra-Bolt on page 52

HARDWOOD & ALUMINUM OUTSWING



o 4 slope

o 4 slope

5 7/16

1/41

415 A, B, CH

ALL ALUMINUM OUTSWING

Wood substrate only.o4 slope

412 A, B, CH

410 A, B, CH

and specified lengths are cut exact.Center holes are counter-sunk.#10 phillips flathead screws ofappropriate length are included. Indicates location of standard fastener hole.

Special anchors may be requiredon concrete slab constructionand are available at extra cost,(see page 54).Standard bumper seal isSantoprene (#9032T).Optional seals (see page 55).

Standard Sizes (Product is cutoversize to allow “cutting in”): 30”,32”, 36”, 42”, 48” (cut 3/8” over);60”, 64”, 72” (cut 1” over).Other lengths are available.(Extra cost over 73”)Routed thresholds (page 18)

THIS DRAWING NOT TO SCALE7 7/16

1/41

417 A, B, CH

9 /164

419 B

continuedOut-swing Door Thresholds

1/41

Wood orCompositesubstrate.

o4 slope



427 A, B High bumper threshold.10 x 1-3/4” phillips flathead screws are included.

2 7/16

7/8

428 A, B, Extra high bumper threshold.10 x 2” phillips flathead screws are included.

2 1/4

1/81

424 A, B, Wide bumper threshold with vinyl moisture barrier.10 x 1-3/4” phillips flathead screws are included.

3 7/16

3/4

423 A, B Low bumper threshold.10 x 1-1/2” phillips flathead screws are included.

2 1/4

5/8

OUTSWING BUMPER THRESHOLDS


451 A, BBumper threshold forcontinuous level floor.

10 x 1-1/2” phillips flatheadscrews are included.

5

5/8

450 A, BBumper threshold.


5

5/8





7

5/8

458 A, BBumper threshold forcontinuous level floor


7

5/8






3111 A, B,1/2” Elevator for increasingheight of saddle thresholds.

1/2

5

5/8

5/8

Floor coveringarea.

5

5/8

5/8

5

5/8

5/8

472 A, BBumper thresholdwill allow for floorcovering.

471 A, BBumper threshold forcontinuous level floor.

10 x 1-1/2” phillipsflathead screws areincluded.




ELEVATORS



Section 8 COMMERCIAL SADDLE THRESHOLDS

1503 A, B10 x 1” phillips flatheadscrews are included.

1502 A, B10 x 1” phillips flatheadscrews are included.

1504 A, B10 x 1-1/2” phillipsflathead screws areincluded 1504-1507.

A, B1505

1506 A, B

1507

6

1/2

7/ 8

6

1/2

2

1/4

1/2

3

5/16

4

1/2

5

1/2

A, B

Standard Sizes (Product is cutoversize to allow “cutting in”): 30”,32”, 36”, 42”, 48” (cut 3/8” over);60”, 64”, 72” (cut 1” over).Other lengths are available(Extra cost over 73”).

Routed thresholds (page 40) andspecified lengths are cut exact.Center holes are counter-sunk.#10 phillips flathead screws ofappropriate length are included.Nominal min. wall thickness 1/8”Tabs avail. for 1/2” saddles. (page 40)

Special anchors may be requiredon concrete slab construction &are available at extra cost, seepage 54.

Barrier free design meets ADA requirements.

½” COMMERCIAL SADDLE THRESHOLDS


continuedCommercial Saddle Thresholds

10 x 1-1/2” phillips flathead screws are included 1516-1520.

1/2

6

1516 A, B

1/2

1517 A, B

7


1518 A, B

1/2

8


10

2/1

1520 A, B

HEAVY DUTY COMMERCIAL SADDLE THRESHOLDS


Tabs can be attached to ½” commercial saddlethresholds to facilitate the connectionbetween thresholds and wood frame.

TABS(RMF) A milling operation to re-move aluminum, enablingthe threshold to be“dropped” into place.

ROUT FOR METAL/MORTISED FRAMES

Order: Exact length required. Specify stop size.Holes: Three (3) center holes per door.

Order: Exact length required.Holes: No center hole.



49/32

1/2

B1529 1/2

9 /164

1519 B

6

1/4

1546 A, B

1/4

4

1544 A, B

1/4

5

1545 A, B

1/4

7

1547 A, B

10 x 1” phillips flathead screws are included 1544-1547.

1/4” COMMERCIAL SADDLE THRESHOLDS

SADDLE THRESHOLDS WITH SCREW BOSS




NOTE: A popular application of the “Half-Saddle” is to meet interior tile flooring.

1514 1511 1514

8 11/16

5/8

DRAWING NOT TO SCALE

Sample Illustration ofThermal Break Thresholds:

10 x 1-1/2” phillips flathead screws are included 1512-1515.

THERMAL BREAK SADDLE THRESHOLDS


1512 A, B

2

1/2

7/16

4

1/2

5

1/2

Black rigid vinyl thermal breakconnector to join saddles.

1511 P

1515 A, B

1514 A, B

Optional sealslisted page 55.

5

1/2

1522 A, BPANIC exit bumperthreshold. Handicappedbarrier-free design.





1/4

1/2

5 7/8

Offset

6

5/8 Offset

6

5/8

1/4

1510 A, B10 x 1-1/4”phillips flatheadscrews areincluded.

1550A, B10 x 1-1/4”phillips flatheadscrews areincluded.

1552A, B10 x 1-1/4”phillips flatheadscrews areincluded.

Offset

Handicapped Ramp Threshold 1:12 Slope.10 x 1-1/4” Phillips flathead screws included.

1550 1552

THIS DRAWING NOT TO SCALE6 6

1/4

5/8

3/4

4

HALF SADDLE

1564 A, B NEW




Section 9 JAMB WEATHERSTRIP


Typical application of jamb type weatherstrip.(Part # 1004 shown.)

NOTE:Santoprene bulb seal (black) isavailable as an option for vinyl on parts1000 & 3212.Special requirements on the job may callfor this advanced seal.Some problems regarding a stickingreaction between certain paints andvinyl have been eliminated with the useof Santoprene .

Standard Sizes 30”, 32”, 36”, 60”72”, 80”, 84”. Aluminum weather-strip is cut 1/4” over.Other lengths are available andcut exact (Extra cost over 84”).

Standard Sets: 32” x 80”, 36” x 80”,72” x 80”, 32” x 84”, 36” x 84”,

Fasteners holes are slotted forclose adjustment in most styles.#6 phillips, stainless steel sheetmetal screws are provided withthese products.

Self drilling sheet metal screws areavailable at extra cost.

JAMB-TYPE WEATHERSTRIP

1000 A, B, W

1/4

3/4

Jamb-type weatherstrip, notchedcorners for continuous appearance.Extruded aluminum carrier withblack, gold, or white vinyl bulb seal.Slotted holes for ease in adjust-ment. #6 x 5/8” SMS provided.

1/4

7/8

A, B, CH, PG, W3212

Jamb-type weatherstrip, withblack, gold, or white vinyl bulbseal, slotted holes. #6 x 5/8”SMS provided.

3/4

3218A Painted Aluminum ColorB Painted BronzeW Painted White

Roll formed aluminum with vinylbulb seal, slotted holes for easein adjustment. #6 x 5/8” SMS areprovided. Only 36" x 80" setsavailable.

and 72” x 84”. Jamb-typeweatherstrip may be ordered inthree piece sets or individuallengths.

Above specifications do not applyto part # 3218. (Only 36" x 80" setsavailable).

1004 A, B, W

1/4

3/4

3/8

Part 1004 is identical to part1000 except for the design ofthe vinyl bulb (Black only).

California Energy CommissionApproved.


continuedJamb Weatherstrip

SCHLEGEL QEBD 650 Q-LON KERF TYPE DOOR SEAL.Fire rated by Underwriters Laboratory for 90 minutes.Inserts easily to seal the strike side, hinge side and header.A Q-LON Door seal made of an open-cell urethane foam core and cladin an embossed polyethylene, U.V. stabilized paint-resistant liner for kerfapplications.QEBD 650 contains no plasticizers to cause deterioration over time.Has 5/8” reach. Resilient reach characteristics conform seal to warpeddoors. Width of barb - 5/32” (.155”)Requires 1/8” x 7/16” kerf in stop. (If rabbeted jamb is used, allow fordepth of 2-1/8”. If applied stop is used, adjust for compression of seal.)Passed water penetration tests at 25 mph and 34 mph ASTM E-331 std. Test.

SCHLEGEL QDS 650 Q-LON KERF TYPE DOOR SEAL.Fire rated by Underwriters Laboratory for 90 minutes in accordance withUL QVWZ file #R14384.Cellular modified foam core, cladding is an embossed, non-vinyl, U.V.stabilized, paint-resistant liner. Has 5/8” reach. Will allow for as muchas 3/16” movement with no loss of sealing performance.Air infiltration tested within ASTM, NWWDA, ANSI and ISDSI standard.Requires 1/8” x 3/8” kerf in stop. (If rabbeted jamb is used, allow fordepth of 2-1/8”. If applied stop is used, adjust for compression of seal.)

5/8

17501750B 82” Brown1750W 82” White1751B 97” Brown1751W 97” White

C L A S S I F I E D

Tolerance +/- 1” (Sold by full box or by piece,broken box premium applies).

BoxQty.150150125125

R

R

C L A S S I F I E D

5/8

17831783B 82” Brown1783W 82” White1784B 97” Brown1784W 97” White1785B 120” Brown1785W 120” White1786D 500’ RL Black1786B 500’ RL Brown1786W 500’ RL WhiteTolerance +/- 1” (Sold by full box or by piece,broken box premium applies).

(Sold by full box or by piece,broken box premium applies).


BoxQty.150150125125125125

FOAM WEATHERSTRIP

SCHLEGEL QEBD 825 Q-LON KERF TYPE DOOR SEAL.EXTENDED REACH.Fire rated by Underwriters Laboratory for 90 minutes.Inserts easily to seal the strike side, hinge side and header.A Q-LON Door seal made of an open-cell urethane foam core and cladin an embossed polyethylene, U.V. stabilized paint-resistant liner for kerfapplications.QEBD 825 contains no plasticizers to cause deterioration over time.Has 13/16” reach. Resilient reach characteristics conform seal to warpeddoors. Width of barb - 5/32” (.155”)Requires 1/8” x 7/16” kerf in stop.

17871787B 97” Brown1787W 97” WhiteTolerance +/- 1”

BoxQty.100100 13/16

C L A S S I F I E D

R

SCHLEGEL QEBD 875 Q-LON KERF TYPE DOOR SEAL.EXTENDED REACH.Fire rated by Underwriters Laboratory for 20 minutes.Inserts easily to seal the strike side, hinge side and header.A Q-LON Door seal made of an open-cell urethane foam core and cladin an embossed polyethylene, U.V. stabilized paint-resistant liner for kerfapplications.QEBD 875 contains no plasticizers to cause deterioration over time.Has 7/8” reach. Resilient reach characteristics conform seal to warpeddoors. Width of barb - 5/32” (.155”)Requires 1/8” x 7/16” kerf in stop.

7/8

17881788B 97” Brown1788W 97” WhiteTolerance +/- 1”

BoxQty.100100

C L A S S I F I E D

R

NEW

NEW


* * * LIFETIME WARRANTY * * * offered by Schlegel & Loxcreen

SCHLEGEL QFS 375 Q-LON ADHESIVE BACKED DOOR SEAL.Fire rated by Underwriters Laboratory for 180 minutes. In accordance withUL QVWZ file #14384.Char foam core, clading is a tough paint-resistant polyethylene liner,UV stabilized.Has 3/8” reach. Will allow for as much as 1/4” movement with no loss ofsealing performance.Compression set less than 1% from 0 degrees F. To 78 degrees F.Stop width required: 1/2” (If rabbeted jamb is used, allow for depth of1-7/8” or 1-15/16”. If applied stop is used, adjust for compressionof seal.)

3/8

C L A S S I F I E D

R

Tolerance +/- 1”

18201820B 86” Brown1820W 86” White


BoxQty.150150

5/8

LOXCREEN 9650 LOXSEAL ® HIGH PERFORMANCE WEATHERSTRIPFire rated by Warnock Hersey, Inc. for 90 minutes (per ASTM E-152).Inserts easily to seal the strike side, hinge side, and header.LoxSeal ® weatherstrip made of polyethylene clad urethane foam.Requires 1/8" X 7/16" kerf in stop.Passed air infiltration test at 25 mph (per ASTM E-283).Passed water penetration resistance (per ASTM E-331).

19501950B 81” Brown1950W 81” White1951B 97” Brown1951W 97” White1952B 120” Brown1952W 120” WhiteTolerance +/- 1”

BoxQty.125125125125

7575


Tolerance +/- 1”

18101810B 82” Brown1810W 82” White1811B 96” Brown1811W 96” White

C L A S S I F I E D

R

1/2


BoxQty.125125125125

SCHLEGEL QEBD 500 Q-LON KERF TYPE DOOR SEAL.Fire rated by Underwriter Laboratory for 180 minutes in accordance withUL QVWZ file #R14384.Cellular modified foam core, cladding is an embossed, non-vinyl, U.V.stabilized, paint-resistant liner. Has 1/2” reach. Will allow for as much as3/16” movement with no loss of sealing performance.Cellular core stays soft at low temperatures. Contains no plasticizers tocause deterioration over time.Air infiltration certified by Pittsburgh Testing Laboratories to as low as .01cfm/fcp; well within ASTM, NWWDA, ANSI and ISDSI standards. Requires1/8” x 3/8” kerf in stop. (If rabbeted jamb is used, allow for depth of1-15/16”. If applied stop is used, adjust for compression of seal.)

Typical installation for:1750, 1783, 1787, 1788, 1810 and 1950.

NEW


* * * LIFETIME WARRANTY * * * offered by Schlegel & Loxcreen

Warnock Hersey


18351825D Black1825W White

B 1825

1826 B, W

1143B Black 84”1143 1830

515 ft. rolls:1830B Brown1830D Black1830W White

17 ft. packages:1430B Brown1430D Black1430W White

CompressionCorner Seal -by Schlegel for installation on strike jamband hinge jamb sill corners.

Corner seal -Adhesive backed, pilecorner seal with fin sealby Schlegel. Effectiveagainst water infiltration.

SCHLEGEL QDS 650 Q-LON DOORSEAL REPLACEMENT KIT (37” X 85”)The seal is original Q-Lon seal permanentlybonded to a metal carrier.

Self-Adjusting The seal is mounted to apre-painted and galvanized no-rust steelcarrier. The seal is soft and flexible with areach of 11/16” when installed.The Q-Lon replacement door seal will self-adjust up to 3/8” to accommodate doormovement or out-of square installations.In addition, it is manually adjustable, asslotted holes in the carrier allow up to 5/16”of additional adjustment.

SANTOPRENE RUBBERFor use with either ½” or ” stop.Adhesive backed, extruded Santoprenerubber, an advanced elastomeric productfrom Monsanto. Provides outstandingengineering properties in UV stability andflame retardance. Service temperaturefrom -81 to +275 degrees F.

Schlegel PF-109

Schlegel PF-114 “A minimumclearance seal” with pressuresensitive adhesive for use ascompression or wipe seal onmetal or wood frames.“Limited to stock on hand”Call for availability.

10501050K White 96” 1052K Tan 96” 1053K Tan 84”

1056K Clear 84”

1052 1053

NOT TO SCALE

Weatherflex seal for kerfapplication. Requires a1/16” x 5/16” kerf.

for kerfapplication. Requires a5/64” x 9/32” kerf.

Weatherflex seal forkerf application. Requiresa 1/8” x 5/16” kerf.

Installs into saw kerf in applied wood stops or center kerfed mortised jambs.

Vinyl bulb3/8” dia.500’ / rollColor: GrayKerf: 1/8” x 5/16”

Schlegel AP-412Aptus TPE

dual durometer withslipcoat bulb surface.1000’ / rollColor: BeigeKerf: 5/64” x 5/16”

Vinyl bulb1/4” dia.

bulb 5/16” dia. 600’ / rollColors: Black,Gray and WhiteKerf: 1/8” x 5/16”

Vinylthree finger1/2” wide500’ / rollColor: GrayKerf: 1/8” x 5/16”.

Vinylthree finger5/16” wide500’ / rollColor: GrayKerf: 1/8” x 5/16”.

9020 9021 9024 9022 9023

2

1 /4

3/8

1

7/16

7/16

3/16

7/16

111/16

ADHESIVE BACKED DOOR SEAL

WEATHERFLEX SEAL

WOODSTOP GASKETING AND SOUND SEALS

5 8



Section 10 ASTRAGALS & MEETING STILES

1/2

1/2

1120 A, B, W 1152 P (Primed) 96” Length only

1160 A, B, W

1130 P

1201 B, PG, S, W

DISCONTINUED - Available only while supplies last..Safety door stile for 1-3/8” or 1-3/4” doors. Vinyl closesapproximately a 1” gap between doors.SMS 6 X 5/8” phillips panhead screws are provided.

Steel meeting stile with countersunk holes.Primed finish. SMS 10 x 1” phillips flatheadscrews are provided.

Extruded aluminum T-Astragal.Screw nails provided.

Extruded aluminum T-Astragal.Screw nails provided.

Black rigid vinyl retainer. Mortised or surfacemounted for proper sealing pressure. Black pileseal (#9082) shown. Optional seals available.SMS 4 x 5/8” phillips panhead screws areprovided. 84” Length.

Optional seals:9032T Bulb9081 Pile (Gray)9082 Pile (Black)9086 Finned Pile (Gray)9088 Finned Pile (Black)(see seal profileson page 55)

13/16

Approx.

2 sets in illustration

13/16

1 3/16InactiveDoor


2

3/16

1

11/16InactiveDoor

All Astragals and Meeting Stiles are cut exact.Standard Sizes: 80” and 84” (Except as noted).

Other lengths are available and are cut exact asordered (Extra cost over 84”).

Steel Meeting Stiles are furnished with counter-sunk holes.

Vinyl seal is black; fasteners are provided.

*

*


continuedAstragals & Meeting Stiles

Standard Features for Astra-Bolts

Astra-Bolt is a registered trade name for Combo Aluminum Product's Double Door Astragals.

5000 B, S, W

ASTRA-BOLT 5100 ASTRA-BOLT “THE ORIGINAL”

This astragal has all of the standard featuresof other Combo Astra-Bolts, plus the C-index plate.This plate is an integral part of the lock mechanismwhich enables the bolt to function correctly whenthe astragal length has been field trimmed.

Specific Features:1) 22” bolt units with spring detent,2) Double seal at exterior and interior location,3) Requires 1/2” space between doors (plus clearance),4) Surface mount,5) Includes bottom seal and top escutcheon plate.

Options: 8” Dead bolt punch out Dead bolt trim pack (trim plate and spacers) Pile seals (#'s 9081, 9082, 9086, 9088)

This design, popular since 1976, is a unique combinationof an astragal, weatherstripping, strike plate, and lockbolt assembly in one unit. The Standard Features werefirst introduced with this model and continue to beoffered.

Specific Features:1) 9” bolt units with spring detent,2) Double seal exterior and interior location,3) Requires 5/8” space between doors (plus clearance),4) Surface mount,5) Includes bottom seal and top escutcheon plate.

Options: 8” Dead bolt punch out Dead bolt trim pack (trim plate and spacers) Pile seals (#'s 9081, 9082, 9086, 9088)

B, PG, S, W

Santoprene#9032T

Vinyl FinSeal

#9028

Santoprene#9032T

Vinyl FinSeal

#9028

1) Hardware pack includes steel strike plate, installation spacers, neoprene bottom seal, escutcheon plate for header, fasteners and full instructions.2) Seal materials of Santoprene , Q-Lon , vinyl, or pile as noted.3) Steel bolts 5/16” diameter.4) All astragals are field handed and can be field trimmed to size.5) Dead bolt punch out and trim plate with spacers are available or included, as noted.6) Trim strips, trim plates, strike plates and accessories in black color or black finish.7) Accommodates heavy reveal on newer doors.8) Special sizes available.

ASTRAGAL PRODUCTS FOR 1-3/4” IN-SWING DOORS



Features: 1) Accepts doors with heavy reveal, 2) Field handed, can be field trimmed, 3) Full strike plate & dead bolt trim plate, 4) Dead bolt punch out for ease of installation, 5) Escutcheon plate for head, 6) Thermoplastic bottom seal.For in-swing doors only

1/2” space between doors plus clearance.

5400 ASTRA-BOLT

5450 THERMAL-BREAK ASTRA-BOLT

B, CH, PG, S, W

SchlegelQ-Lon

BlackFinnedPile#9088

Black Pile#9082

SchlegelQ-Lon

Black Pile#9082

ThermalBreak

Black Pile#9089

TRIPLE WEATHERSTRIP SEALand

22” LOCKING BOLTS

PATENT 6457751(Bolt Assembly)

22 INCH SPRINGDETENT POSITIVEACTION BOLT UNITTOP & BOTTOM

QUARTER-TURNRED KNOB FORADDED SECURITY

SCHLEGELQ-LONDOOR SEAL

INCLUDES 8”PUNCH OUTS FORDEAD BOLT(TWO ON 96”+)

DEAD BOLT TRIMPLATE

FULL STRIKEPLATE

B, W

THIS

DR

AW

ING

NO

T TO S

CA

LE



Features: 1) 5/16” dia hardened steel pin, 2) 22” spring detent positive action bolt unit top & bottom (Patent #6457751), 3) 2 heavy duty escutcheon plates for top and bottom.

Additionally: Field handed, can be field trimmed, Thermoplastic bottom seal provided, Fasteners included.

For in-swing doors only 1/2” space between doors plus clearance.

5475HURRICANE-RATEDASTRA-BOLTB, CH, PG, S, W

NEW







5/16" DIAMETERHARDENEDSTEEL PIN


DEAD BOLT TRIMPLATE

FULL STRIKEPLATE

THIS

DR

AW

ING

NO

T TO S

CA

LE

SchlegelQ-Lon


Black Pile#9082


5500

Closed Door Interior

Exterior

This COMBO two piece astragal is for:1-3/4” OUT-SWING DOORS

Security Shield

Features:For The Active Door:

Extruded aluminum Security Shield (screw nails provided).

Option: Drill and countersink holes on shield with screws provided.

For The Inactive Door:Field handed, can be field trimmed,Full strike plate & dead bolt trim plate,Dead bolt punch out for ease of installation,Escutcheon plate for head,Spacing requirements: 1/2” for astragal and1/16” for security shield, plus clearance.

B, CH, PG, S, W

NOT TO SCALE

Black Pile#9082

SecurityShield

SchlegelQ-Lon

ASTRA-BOLT FOR OUT-SWING DOORS




22 INCH SPRINGDETENT POSITIVE

ACTION BOLT UNITTOP & BOTTOM

QUARTER-TURNRED KNOB FOR

ADDED SECURITY

SCHLEGELQ-LON

DOOR SEAL

INCLUDES 8”PUNCH OUTS

FOR DEAD BOLT(TWO ON 96"+)

DEAD BOLTTRIM PLATE

FULL STRIKEPLATE

THIS

DR

AW

ING

NO

T TO S

CA

LE


Features: 1) Accepts doors with heavy reveal, 2) Field handed, can be field trimmed, 3) Full strike plate & dead bolt trim plate, 4) Dead bolt punch out for ease of installation, 5) Escutcheon plate for head, 6) Thermoplastic bottom seal.For in-swing doors only 1/2” space between doors plus clearance.

5600B, CH, PG, S, W

5700B, W

ASTRA-BOLT FOR 2-1/4” IN-SWING DOORS

ASTRA-BOLT FOR 2-1/4” OUT-SWING DOORS







INCLUDES 8”PUNCH OUTS FORDEAD BOLT(TWO ON 96"+)

DEAD BOLT TRIMTRIM PLATE

FULL STRIKEPLATE


22 INCH SPRINGDETENT POSITIVE

ACTION BOLT UNITTOP & BOTTOM

QUARTER-TURNRED KNOB FOR

ADDED SECURITY

SCHLEGELQ-LON

DOOR SEAL

INCLUDES 8”PUNCH OUTS FOR

DEAD BOLT(TWO ON 96"+)

DEAD BOLT TRIMTRIM PLATE

FULL STRIKEPLATE


SecurityShield

Black Pile#9082

SecurityShield

SchlegelQ-Lon

SchlegelQ-Lon


Black Pile#9082

Section 11 MISCELLANEOUS

Machine screw with lead anchor.10-24 x 2”, 3/8” hole required.Zinc & bronze.

9100Lock anchor, zinc plated only.1/4” x 2”, 1/4” hole required.

9101

9104Plastic screw anchor. 1/4” x 1”,1/4” hole required.

9103Nylon drive anchor. 1/4” x 2”,1/4” hole required.

Nylon drive anchor. 1/4” x 1-1/2”, 1/4” hole required.

9102

Fasteners other than standard may be substituted at the time of ordering atadditional cost. Bulk fasteners are available per hundred or per pound.

SPECIAL ANCHORS

4010 Bronze tone paint - 12 oz spray canTOUCH-UP PAINT

858 A, BDOOR BOTTOM / CAP COMBINATIONfor use with side lites or atrium doorunits for a continuous look.

(NOT TO SCALE)

Side Lites

55/8

1 1/4

1 1/4

(NOT TO SCALE)



Section 12 REPLACEMENT SEAL INSERTS

ASTRA-BOLT seals are described on pages 49, 50, 51, 52, & 53.Replacement Seal for any product may be ordered by providing the product part number.

CONCEALED SEAL / VINYL INSERT 206 322 324

205

357 358 362 363

213

INSERT SEAL PART # PRODUCT USE / #

9019V- Smooth vinyl

9007V- Smooth Vinyl

9008V- Finger Vinyl

9050R- TPR

9010V- Double vinyl(2 pieces / door bottom)

9011V- Wide Finger vinyl9011VL- For Cold Climate

9012V- Leg Vinyl

DOOR BOTT

DOOR BOTTOMS

OMS / T-ASTRAGALS 100 150 200 220 222 224 226 250 252 255 256 260 280 1201

101 151 201 221 223 225 227 251 253 257 261 281

300 301 304 305 322 324 332 340 378 410 412 424 542 811 817 820 822 830 835 836 840 841 842 845 850 852 1516 1517 1518 1534 3007 3008 3017 3019 1520

THRESHOLDS

9032T- Bumper Seal(Santoprene ®) standard

Pile inserts:9081/82 .290 Hght. Gr / BI9086 Fin .290 Hght. Gray9088 Fin .360 Hght. Black9089 .200 Hght. Black

400 401 423 424 427 428 450 451 457 458 470 471 472 1522 1534

OUT-SWING DOOR THRESHOLDS

(Also #1130 & Astragals)(Only fits 5450)

9017VBulb Seal (also availablein Gold & White)9017TBulb Seal (Santoprene )

Jamb-type WEATHERSTRIP

1000 3212 3215

9031V- CA Approved 1004

All 1-3/4" Door Bottoms(except 255)

All 2-1/4" Door Bottoms2499009V- PVC Seal(Dual-Durometer)


NEW



IDENTIFICATION GUIDE

2 5/16

1

1

7/16

1 1/2

1

1 1/8 7/16

Section 13 SECURITY DOOR COMPONENTSALUMINUM COMPONENTS FOR STEEL SECURITY DOORS

Finish: ALODINEThis finish serves as an anti-corrosive and a primer for paint. All parts sold at specified lengths andin box quantites only, as indicated below. No mounting holes or fasteners provided.

ASTRAGALPART NO LENGTH BOX QTY

61006104

100”85”

1010

9060V(FOR EXPANDER)

Extruded VinylFin Seal,3/8” Reach,1000’/roll,Color: Black

NEW

NEW

NEW


PRODUCTS ARE SHOWN ACTUAL SIZE56

EXPANDERPART NO LENGTH BOX QTY

61166118

52”38”

2020

Z-BARPART NO LENGTH BOX QTY

61346138

100”85”

2525

6144 41” 25

Equal Angle 1/2” x 1/2” 6’, 8’, or 12’

7150 S

1/2

1/2

Angle 1/2” x 1” 6’ or 12’

7130 S

1

1/2

Angle 3/4” x 1/2” 6’ or 12’

7100 S1/2

3/4

3/64

Equal Angle 3/4” x 3/4”6’, 8’, or 12’

7160 BA, S

3/4

1/163/4

Equal Angle 1” x 1”6’, 8’, or 12’

7170 S

1

11/16

Chanel 7/16” x 1/4”6’ or 12’

7300 S

1/4

7/16

3/8

1/16

Square Tube 1” x 1”6’ or 12’

7360 S

1

1/161

Channel 9/16” x 1/2” 6’ or 12’

7310 S

1/29/16

5/8

Channel 23/32” x 5/8” 6’ or 12’

7320 S

5/823/32

25/32

Flatbar 1/2” x 1/8”6’ or 12’

7400 S

1/8

1/2

Flatbar 3/4” x 1/8”6’ or 12’

7410 S

1/8

3/4

Flatbar 1” x 1/8”6’ or 12’

7420 S

11/8

Flatbar 1-1/2” x 1/8”6’ or 12’

7430 S

1/8

1-1/2

Equal Angle 1” x 1”6’ or 12’

7210 S

1

1Equal Angle3/4” x 3/4”

6’ or 12’

7200 S

3/4

3/4

Equal Angle 1-1/2” x 1-1/2”6’ or 12’

7220 S

1-1/2

1-1/2

1/8

2

2

1/81/81/8

7230 S

Equal Angle 2” x 2”6’ or 12’

Section 14 METAL MOULDINGS & FLOOR TRIMFUTURA INDUSTRIESBy

METAL MOULDING



1/16

1/165/32

23/32

7790 A1/16 Flat Back

12’

Pinless Clampdown3’, 6’, or 12’

7650 A,G

1-1/4

1/2

Binder Bar3’, 6’, or 12’

7610 A, G

1-3/8

7/16


7600 A,G

1/4

1

Stair Nosing3’, 6’, or 12’

7690 A,G

1-1/8

1-5/32Seam Cover3’, 6’, or 12’

7670 A

Plain Facing 3/4”6’ or 12’

7710 BA

13/16

3/4

Punched and slottedon 2” centers

6’ or 12’

7800 A

11/16

1/43/32

Clampdown w/pins 3’, 6’, or 12’

7640 A,G

1 3/8

1/2


7620 A,G

2

1/2

Overlap Edging6’ or 12’

7680 A

5/32

3/4

Plain Facing6’ or 12’

7700 BA

9/16

1/4

1/2

Plain Facing 7/8”6’ or 12’

7720 BA

7/8

15/16

7730 BA

1-1/8

1-1/16

7900 S

1/4 1/4

1-1/8

1/2

1-1/8

1/2

1/4 1/4 1/4

1-1/4

1/81/8

3/4

Seam Cover3’, 6’, or 12’

7660 A,G

7810 APunched and slotted

on 2” centers6’ or 12’

3/4

1/4

1/8

1/8” Cap 5’, 8’ or 10’

7820 BA

1/4

25/32

3/8

1/8

1/4” Coving Cap 8’

7830 BA

7/8

11/32

5/16

1/4

1/8” Divider8’

7850 BA

1-7/32

1/4

1/2

continuedMetal Mouldings & Floor Trim

FLOOR TRIM

EDGE FACING & WALL BOARD TRIM

6’ SLIDING DOOR TRACK SET

Plain Facing 1-1/16”6’ or 12’

NEW

7/8

Inside Corner Cove 6’

7880 BA



50th anniversary catalogwesternwindowsales.com/images/wwsiwebstuff/oldstuff/web...1 cover design by...

Documents