Paper template

Kambohwell-Temple Paper-TittleInternational Journal of Engineering Works Kambohwell Publisher EnterprisesISSN: 2409-2770 Vol. 1, Issue 1, PP. 1-4, Jan 2015 www.kwpublisher.com

International Journal of Engineering Works Vol. 1, Issue 1, PP. 1-4, Jan 2015 ISSN: 2409-2770

First Author Name, Second Author Name, Third Author Name

AbstractThe instructions are given in this temple as guidelines for papers preparation of kambohwell publishers journals. Utilize these documents as a template if you have a Microsoft Word in your computer or laptop. Otherwise, you can use this document as an instruction set for target papers. The electronic file of your paper will be initialized further at Kambohwell publisher enterprises journals. All symbols should be determined and do not cite references in the abstract. Making good format, do not try to delete the blank line instantly above the abstract; it sets the footnote at the bottom of this column. The page margins should be fixed at 1.18" top and down; 1.34" left and right is 0.51". Each paper column width is 8.27" & height is 11.69"and the separation should be between the columns is 0,51 cm. First page header from top should be fixed 0.4" and page footer from bottom should be 0.6". Keywords The most referred 5 keywords or phrases are written simultaneously with separated by commas

Introduction (Heading 1)This template, modified in MS Word 2003 and saved as Word 97-2003 & 6.0/95 RTF for the PC, provides authors with most of the formatting specifications needed for preparing electronic versions of their papers. All standard paper components have been specified for three reasons: (1) ease of use when formatting individual papers and (2) automatic compliance to electronic requirements that facilitate the concurrent or later production of electronic products. Margins, column widths, line spacing, and type styles are built-in; examples of the type styles are provided throughout this document and are identified in italic type, within parentheses, following the example. Some components, such as multi-leveled equations, graphics, and tables are not prescribed, although the various table text styles are provided. The formatter will need to create these components, incorporating the applicable criteria that follow. Ease of UseSelecting a Template (Heading 2)First, confirm that you have the correct template for your paper size. This template has been tailored for output on the A4 (21x 29.7") paper size. Maintaining the Integrity of the SpecificationsThe template is used to format your paper and style the text. All margins, column widths, line spaces, and text fonts are prescribed; please do not alter them. You may note peculiarities. For example, the head margin in this template measures proportionately more than is customary. This measurement and others are deliberate, using specifications that anticipate your paper as one part of the entire proceedings, and not as an independent document. Please do not revise any of the current designations.

Prepare Your Paper Before StylingBefore you begin to format your paper, first write and save the content as a separate text file. Keep your text and graphic files separate until after the text has been formatted and styled. Do not use hard tabs, and limit use of hard returns to only one return at the end of a paragraph. Do not add any kind of pagination anywhere in the paper. Do not number text heads-the template will do that for you.Finally, complete content and organizational editing before formatting. Please take note of the following items when proofreading spelling and grammar:Abbreviations and AcronymsDefine abbreviations and acronyms the first time they are used in the text, even after they have been defined in the abstract. Abbreviations such as IEEE, SI, MKS, CGS, sc, dc, and rms do not have to be defined. Do not use abbreviations in the title or heads unless they are unavoidable.UnitsIn this section, you should write a project detail, if applicable otherwise "empty (for example: This Research work is funded by kambohwell publisher enterprise (Dept. of publications) Grant No. is 2011A77882B1 National High-Technologies Research & Development) Program (21-958 projects) of World Trade Organization.

First Author: affiliation, email, address, phone Second Author: affiliation, email, address, phone Third Author: affiliation, email, address, phone Fourth Author: affiliation, email, address, phone

Use either SI (MKS) or CGS as primary units. (SI units are encouraged.) English units may be used as secondary units (in parentheses). An exception would be the use of English units as identifiers in trade, such as 3.5-inch disk drive.Avoid combining SI and CGS units, such as current in amperes and magnetic field in oersteds. This often leads to confusion because equations do not balance dimensionally. If you must use mixed units, clearly state the units for each quantity that you use in an equation.Do not mix complete spellings and abbreviations of units: Wb/m2 or webers per square meter, not webers/m2. Spell out units when they appear in text: . . . a few henries, not . . . a few H.Use a zero before decimal points: 0.25, not .25. Use cm3, not cc. (bullet list)EquationsThe equations are an exception to the prescribed specifications of this template. You will need to determine whether or not your equation should be typed using either the Times New Roman or the Symbol font (please no other font). To create multileveled equations, it may be necessary to treat the equation as a graphic and insert it into the text after your paper is styled.Number equations consecutively. Equation numbers, within parentheses, are to position flush right, as in (1), using a right tab stop. To make your equations more compact, you may use the solidus ( / ), the exp function, or appropriate exponents. Italicize Roman symbols for quantities and variables, but not Greek symbols. Use a long dash rather than a hyphen for a minus sign. Punctuate equations with commas or periods when they are part of a sentence, as in

(1)Note that the equation is centered using a center tab stop. Be sure that the symbols in your equation have been defined before or immediately following the equation. Use (1), not Eq. (1) or equation (1), except at the beginning of a sentence: Equation (1) is . . .Some Common MistakesThe word data is plural, not singular.The subscript for the permeability of vacuum 0, and other common scientific constants, is zero with subscript formatting, not a lowercase letter o.In American English, commas, semi-/colons, periods, question and exclamation marks are located within quotation marks only when a complete thought or name is cited, such as a title or full quotation. When quotation marks are used, instead of a bold or italic typeface, to highlight a word or phrase, punctuation should appear outside of the quotation marks. A parenthetical phrase or statement at the end of a sentence is punctuated outside of the closing parenthesis (like this). (A parenthetical sentence is punctuated within the parentheses.)A graph within a graph is an inset, not an insert. The word alternatively is preferred to the word alternately (unless you really mean something that alternates).Do not use the word essentially to mean approximately or effectively.In your paper title, if the words that uses can accurately replace the word using, capitalize the u; if not, keep using lower-cased.Be aware of the different meanings of the homophones affect and effect, complement and compliment, discreet and discrete, principal and principle.Do not confuse imply and infer.The prefix non is not a word; it should be joined to the word it modifies, usually without a hyphen.There is no period after the et in the Latin abbreviation et al..The abbreviation i.e. means that is, and the abbreviation e.g. means for example.An excellent style manual for science writers is [7].

Using the TemplateAfter the text edit has been completed, the paper is ready for the template. Duplicate the template file by using the Save As command, and use the naming convention prescribed by IJSEI for the name of your paper. In this newly created file, highlight all of the contents and import your prepared text file. You are now ready to style your paper; use the scroll down window on the left of the MS Word Formatting toolbar.Authors and AffiliationsThe template is designed so that author affiliations are not repeated each time for multiple authors of the same affiliation. Please keep your affiliations as succinct as possible (for example, do not differentiate among departments of the same organization). This template was designed for three or more affiliations.Identify the HeadingsHeadings, or heads, are organizational devices that guide the reader through your paper. There are two types: component heads and text heads.Component heads identify the different components of your paper and are not topically subordinate to each other. Examples include Acknowledgments and References and, for these, the correct style to use is Heading 5. Use figure caption for your Figure captions, and table head for your table title. Run-in heads, such as Abstract, will require you to apply a style (in this case, italic) in addition to the style provided by the drop down menu to differentiate the head from the text.Text heads organize the topics on a relational, hierarchical basis. For example, the paper title is the primary text head because all subsequent material relates and elaborates on this one topic. If there are two or more sub-topics, the next level head (uppercase Roman numerals) should be used and, conversely, if there are not at least two sub-topics, then no subheads should be introduced. Styles named Heading 1, Heading 2, Heading 3, and Heading 4 are prescribed.Figures and TablesPositioning Figures and Tables: Place figures and tables at the top and bottom of columns. Avoid placing them in the middle of columns. Large figures and tables may span across both columns. Figure captions should be below the figures; table heads should appear above the tables. Insert figures and tables after they are cited in the text. Use the abbreviation Fig. 1, even at the beginning of a sentence.

Table Type StylesTable HeadTable Column Head

Table column subheadSubheadSubhead

copyMore table copya

a. Sample of a Table footnote. (Table footnote)

Example of a figure caption. (figure caption)We suggest that you use a text box to insert a graphic (which is ideally a 300 dpi TIFF or EPS file, with all fonts embedded) because, in an MSW document, this method is somewhat more stable than directly inserting a picture.To have non-visible rules on your frame, use the MSWord Format pull-down menu, select Text Box > Colors and Lines to choose No Fill and No Line.

Figure Labels: Use 8 point Times New Roman for Figure labels. Use words rather than symbols or abbreviations when writing Figure axis labels to avoid confusing the reader. As an example, write the quantity Magnetization, or Magnetization, M, not just M. If including units in the label, present them within parentheses. Do not label axes only with units. In the example, write Magnetization (A/m) or Magnetization {A[m(1)]}, not just A/m. Do not label axes with a ratio of quantities and units. For example, write Temperature (K), not Temperature/K.

Acknowledgment (Heading 5)The preferred spelling of the word acknowledgment in America is without an e after the g. Avoid the stilted expression, One of us (R. B. G.) thanks . . . Instead, try R. B. G. thanks.

ReferencesThe template will number citations consecutively within brackets [1]. The sentence punctuation follows the bracket [2]. Refer simply to the reference number, as in [3]do not use Ref. [3] or reference [3] except at the beginning of a sentence: Reference [3] was the first . . .Number footnotes separately in superscripts. Place the actual footnote at the bottom of the column in which it was cited. Do not put footnotes in the reference list. Use letters for table footnotes.Unless there are six authors or more give all authors' names; do not use et al.. Papers that have not been published, even if they have been submitted for publication, should be cited as unpublished [4]. Papers that have been accepted for publication should be cited as in press [5]. Capitalize only the first word in a paper title, except for proper nouns and element symbols.For papers published in translation journals, please give the English citation first, followed by the original foreign-language citation [6].

G. Eason, B. Noble, and I. N. Sneddon, On certain integrals of Lipschitz-Hankel type involving products of Bessel functions, Phil. Trans. Roy. Soc. London, vol. A247, pp. 529551, April 1955. (references)J. Clerk Maxwell, A Treatise on Electricity and Magnetism, 3rd ed., vol. 2. Oxford: Clarendon, 1892, pp.6873.I. S. Jacobs and C. P. Bean, Fine particles, thin films and exchange anisotropy, in Magnetism, vol. III, G. T. Rado and H. Suhl, Eds. New York: Academic, 1963, pp. 271350.K. Elissa, Title of paper if known, unpublished.R. Nicole, Title of paper with only first word capitalized, J. Name Stand. Abbrev., in press.Y. Yorozu, M. Hirano, K. Oka, and Y. Tagawa, Electron spectroscopy studies on magneto-optical media and plastic substrate interface, IEEE Transl. J. Magn. Japan, vol. 2, pp. 740741, August 1987 [Digests 9th Annual Conf. Magnetics Japan, p. 301, 1982].M. Young, The Technical Writer's Handbook. Mill Valley, CA: University Science, 1989.

First A. Author and the other authors may include biographies at the end of regular papers. The first paragraph may contain a place and/or date of birth (list place, then date). Next, the authors educational background is listed. The degrees should be listed with type of degree in what field, which institution, city, state or country, and year degree was earned. The authors major field of study should be lower-cased.Photo

The second paragraph uses the pronoun of the person (he or she) and not the authors last name. It lists military and work experience, including summer and fellowship jobs. Job titles are capitalized. The current job must have a location; previous positions may be listed without one. Information concerning previous publications may be included. Try not to list more than three books or published articles. The format for listing publishers of a book within the biography is: title of book (city, state: publisher name, year) similar to a reference. Current and previous research interests ends the paragraph.The third paragraph begins with the authors title and last name (e.g., Dr. Smith, Prof. Jones, Mr. Kajor, Ms. Hunter). List any memberships in professional societies like the IEEE. Finally, list any awards and work for professional committees and publications. Personal hobbies should not be included in the biography.