55435064 usmc technical data sheet for less than lethal munitions demolition associated items usa...

01 November 2007

UNITED STATES MARINE CORPS TECHNICAL DATA SHEET FOR LESS THAN LEHTAL MUNITIONS, DEMOLITION AND

ASSOCIATED ITEMS

TABLE OF CONTENTS DODIC NOMENCLATURE A023 Ctg., 12 Ga. Slug, 1 oz. A024 Ctg., 12 Ga. Door Breaching AA02 Ctg., 5.56mm, M995, Armor Piercing, Linked AA03 Ctg., 7.62mm, M993, Armor Piercing AA11 Ctg., 7.62 mm Special Ball, M118 Long Range AA12 Ctg., 9mm FX Marking (Red) AA21 Ctg., 9mm FX Marking (Blue) AA29 Ctg., 12 Ga. Bean Bag Non-Lethal AA30 Ctg., 12 Ga. Launching Round Non-Lethal AA31 Ctg., 12 Ga. Rubber Fin Stabilized Non-Lethal AA40 Ctg., 5.56mm Jacketed Frangible AA53 Ctg., 5.56mm Special Match MK 262 MOD 0 AA53 Ctg., 5.56mm Special Match MK 262 MOD 1 AA55 Ctg., Shotgun, 12 Ga. Dummy MK 242 MOD 0 AA67 Ctg., 5.56mm Special Match, Moly Coated AX14 Primer, Percussion W209 BA07 Ctg., 40mm Foam Rubber Baton Non-Lethal BA08 Ctg., 40mm Rubber Ball Non-Lethal BA09 Ctg., 40mm Wooden Baton Non-Lethal BA18 Ctg., 40mm Low Velocity Practice BA21 Ctg., 40mm Practice MK 281 MOD 1 C484 Cgt., 81mm Illuminating, (IR), M816, W/Fuze MTSQ M772 DWBS Diversionary Charge, MK 141 G874 Fuze, Grenade, Practice Non-Lethal M201A1-1 G982 Grenade, Hand, Practice TA Smoke M83 GG04 Grenade, Rubber Ball Non-Lethal GG05 Grenade, Practice Body Non-Lethal GG13 Grenade, Practice Body Non-Lethal GG14 Fuze, Grenade, Practice MK 439 MOD 0 HA34 Rocket, Encased, (SMAW), 83mm, Mk 80 Mod 0 HX05 Rocket, Encased, (SMAW), 83mm, Mk 3 Mod 0 HX06 Rocket, Encased, (SMAW), 83mm, Mk 6 Mod 0 HX07 Rocket, Encased, (SMAW), 83mm, Mk 7 Mod 0 J143 Rocket Motor, 5 Inch M487 Container, Demolition Charge, MK 8 MOD 1 M913 Linear Demolition Charge M58A4 M980 Charge, Demolition, Explosive Sheet Flexible 2 Grams M981 Charge, Demolition, Explosive Sheet Flexible 3 Grams M982 Charge, Demolition, Explosive Sheet Flexible 4 Grams ML25 Linear Demolition Charge M59A1 ML47 Cap, Blasting, Non-Electric, M11, 30ft Shock Tube, (MDI) ML82 Fuze, Electric M1134A3E1

MM30 Charge, Demolition Flexible 20 Grams MM41 Charge, Demolition Shaped, Linear, Flexible 30 Grains MM42 Charge, Demolition Shaped, Linear, Flexible 40 Grains MM43 Charge, Demolition Shaped, Linear, Flexible 60 Grains MM44 Charge, Demolition Shaped, Linear, Flexible 75 Grains MM45 Charge, Demolition Shaped, Linear, Flexible 125 Grains MM46 Charge, Demolition Shaped, Linear, Flexible 225 Grains MM47 Charge, Demolition Shaped, Linear, Flexible 400 Grains MM48 Charge, Demolition Shaped, Linear, Flexible 600 Grains MM51 Charge, Demolition Linear, Flexible Low Hazard 600 Grains MM52 Charge, Demolition Linear, Flexible Low Hazard 1200 Grains MM53 Charge, Demolition Linear, Flexible Low Hazard 2400 Grains MM54 Charge, Demolition Linear, Flexible Low Hazard 5400 Grains MM56 Detonator, Non-Electric MK123 MN01 Canine Scent Kit MN02 Cap, Blasting, Non-Electric, M12, 500ft Shock Tube, (MDI) MN03 Cap, Blasting, Non-Electric, M13, 1000ft Shock Tube, (MDI) MN08 Igniter, Time Blasting Fuse, M81, w/Shock Tube Capabilit

CARTRIDGE, 12 GAUGE, SHOTGUN, SLUG

Type Classification: Std Use: Mossberg 500 and Remington 870 shotguns. The cartridge is intended for use against personnel. Description: 12 Gauge 2 ¾”, slug cartridge, foster type. The cartridge case consists of a plastic shell body with high brass base. The cartridge contains primex propellent . The projectile consists of one rifled slug. The slug is composed of lead or lead antimony and of the foster type. The nominal weight of the slug is 1 ounce. Tabulated Data: Weight----------------------700 grains Length--------------------2.75 in Primer--------------------Percussion Propellant: Type----------------------Primex Weight-------------------34 grains Performance: Chamber pressure--------11,500 psi Velocity-------------------- 1,590 ft/sec

Federal Supply Code: NSN-------------------------1305-01-386-5604 DODIC--------------------A023 Unit of Issue: Each Packed-----------------------120 per M2A1 Metal Can 240 Per Wirebound Box Packing Data: Wirebound Box: Weight (w/Contents)-----45.90 lbs Dimensions----------------14.44 in. x 12.53 in. x 8.12 in. Shipping and Storage Data: Hazard Class/Division And SCSG-----------------1.4S UN Serial Number----------0012 UN Proper Shipping Name CARTRIDGES FOR SMALL ARMS, INERT PROJECTILE Drawings: Assembly------------------6552019 Packing (inner)-----------6665097 Packing (outer)-----------6665096

Reference: MIL-STD-129M MIL-STD-636 MIL-STD-644A MIL-STD-1167C MIL-STD-1168A MIL-STD-1322-54 DOD-STD-2101

CARTRIDGE, 12 GAUGE, DOOR BREACHING

Type Classification: Std Use: Mossberg 500 and Remington 870 shotguns. The cartridge is intended for lock busting and door breaching Description: The cartridge case consists of a polyethylene shell with high brass base. The cartridge contains Alliant 353 propellant . The projectile consists of a balloon filled with iron powder. The nominal weight of the projectile is no less than 300 grains and no more than 800 grains. Tabulated Data: Weight----------------------807.5 grains (plus or minus 250 grains) Length--------------------2.45 in Primer--------------------Percussion Propellant: Type----------------------Alliant 353 Weight-------------------29.9 grains Performance: Chamber pressure--------13,000 psi Energy--------------------- 1,400 ft lbs

Federal Supply Code: NSN-------------------------1305-01-431-5624 DODIC--------------------A024 Unit of Issue: Each Packed-----------------------160 per M2A1 Metal Can 320 Per Wirebound Box Packing Data: Wirebound Box: Weight (w/Contents)-----45.90 lbs Dimensions----------------14.44 in. x 12.53 in. x 8.12 in. Shipping and Storage Data: Hazard Class/Division And SCSG-----------------1.4S UN Serial Number----------0012 UN Proper Shipping Name: CARTRIDGES FOR WEAPONS, INERT PROJECTILE Drawings: Assembly------------------7232080 Packing (inner)-----------6665105 Packing (outer)-----------6665104

Reference: MIL-STD-129M MIL-STD-636 MIL-STD-644A MIL-STD-1167C MIL-STD-1168A MIL-STD-1322-54 DOD-STD-2101

CARTRIDGE, 5.56MM, ARMOR PIERCING (AP), M995

Type Classification:

Std - 29 Mar 96.

Use:

Rifle, 5.56MM, M16A2 Rifle, 5.56MM, M249 SquadAutomatic Weapon.

Description:

Armor Piercing Cartridge. This cartridge is identified byblack bullet tip identification paint.

Purpose:

This cartridge provides improved penetrationperformance against various targets as compared tostandard ball ammunition.

Tabulated Data:

DODAC........................ 1305-AA01,1305-AA02Weight ......................... 180 grLength.......................... 2.25 in.Tracer .......................... N/APrimer.......................... 4.5mm BerdanFuze............................. N/AExplosive:

Type ......................... N/AWeight ...................... N/A

Incendiary:Type ......................................N/AWeight ...................................N/A

Propellant:Type ......................................WCR845Weight ...................................27.5 gr

Projectile:Weight ...................................52 gr

Performance:

Chamber pressure.....................50,250 psiVelocity .....................................3324 fps at 78 ft

from muzzle

Shipping and Storage Data:

Linked AP cartridge...................1305-01-393-7050,AA01Linked AP cartridge with tracer..1305-01-393-7052,

AA02Quantity-distance class/SCG.....1.4SStorage code.............................Class CDOT shipping class ...................CDOT designation .......................SMALL ARMSAMMUNITIONDrawing number........................12956131

References:

TM 9-1005-201-10TM 9-1005-319-10TM 9-1305-201-20&PTM 9-1305-201-34&P

CARTRIDGE, 7.62 MM, ARMOR PIERCING (AP), M993


Std - 16 Feb 96.

Use:

Rifle, 7.62 MM, M24 Sniper Weapon SystemMachine Guns, 7.62 mm: M60 and M240.

Description:

7.62 mm Armor Piercing Cartridge. The cartridgeis identified by a black stripe circling the tip of theprojectile. This item will be linked with M62 Tracer.

Purpose:

The 7.62 mm cartridge provides an enhancedarmor penetrating capability for use in standard 7.62mm weapons.

Tabulated Data:

DODAC.............................................1305-01-398-1450,AA03;1305-01-398-1449,AA04

Weight .............................................362.6 grLength...............................................2.80 in.Tracer ...............................................N/APrimer ..............................................PercussionFuze..................................................N/AExplosive:

Type .............................................N/AWeight ...........................................N/A

Incendiary:Type .............................................N/AWeight ...........................................N/A

Propellant:Type .............................................Bofors NC1290Weight ...........................................45 gr

Projectile:Weight ...........................................126.6 gr

Performance:

Average chamber pressureat 70°F...........................................55,115 psi

Average velocity at 70°F...................2985 fps at 78 ftfrom muzzle


M993 AP, carton packed ..................1305-01-398-1450,DODAC AA03

M993 AP and M62 tracer,linked in 24:1 ratio..........................1305-01-398-1449,

DODAC AA04Quantity-distance class/SCG ............1.4CStorage code.....................................Class CDOT shipping class ..........................CDOT designation ...............................SMALL ARMS

AMMUNITIONDrawing number................................12956134

References:

TM 9-1005-224-10TM 9-1005-306-10TM 9-1005-313-10TM 9-1305-201-20&PTM 9-1305-201-34&P

CARTRIDGE, 7.62MM SPECIAL BALL M118 LONG RANGE

Type Classification: Std Use: The Cartridge, 7.62 mm Special Ball M118 Long Range is intended and specifically manufactured for use in high accuracy weapons with extended range capability. Description: The 7.62mm Special Ball M118 Long Range projectile has an open tip. The cartridge is manufactured in accordance with industry standards and with commercial color finish. Tabulated Data: DODAC-------------------1305-AA11 UNO serial number------0012 UNO proper shipping Name--------------------Cartridge, Small Arms Weight----------------------392 grains Length--------------------2.83 in Primer--------------------Percussion Propellant: Type----------------------Flash suppressed, Double Based Ball Powder Weight-------------------44 grains Projectile: Weight-------------------175 grains Jacketed Open Tip Boattailed Performance: Chamber Pressure---------50,000 psi Velocity---------------------2580 ft/sec

Federal Supply Code: NSN-------------------------1305-01-419-8202 DODIC----------------------AA11 Unit of Issue: Each Packed-----------------------460 per Metal Can/ 920 Per Wooden Box Packing Data: Wooden Box: Weight (w/Contents)-----73.5 lbs Dimensions----------------14.44 in. x 12.125 in. x 7.675 in. Shipping and Storage Data: Hazard Class/Division And SCSG-----------------1.4S UN Serial Number----------0012 UN Proper Shipping Name: Cartridge, Small Arms Drawings: Assembly------------------8597555 Packing (inner)-----------9390515 Packing (outer)-----------9362607 References: MIL-A-2550 ANSI Y14.5M-1982

CARTRIDGE, 9MM FX MARKING (RED)

Type Classification: Std Use: The Cartridge, 9mm FX Marking, Red is designed to be utilized with the M4A1 Carbine, M16, MEUSOC .45 and M9 Special Effects Small Arms Marking System (SESAMS) Adapter Kits. Use of the Cartridge, 9mm FX Marking round provides an effective close-range, force-on-force training system. Description: The Cartridge, 9mm FX Marking complete round is made up of a 9mm Brass Case, a Plastic Sabot and a 7.62mm Plastic Projectile. The Plastic Projectile contains a red colored marking compound. When fired from the M4A1 Carbine Adapter Kit, they have a muzzle velocity of about 550 fps at 70 degrees Fahrenheit with accuracy of a 10-round group having a mean radius of no greater than 3 inches at a distance of 30 ft. Tabulated Data: Weight---------------0.030 lbs Length---------------1.12 in. Diameter-------------0.39 in. Federal Supply Code: NSN------------------------1305-01-439-9717 DODIC--------------------AA12

Unit of Issue: Each Packed-------------------50 per Fiber Container/ 3,800 Per Metal Box Packing Data: Metal Box: Weight (w/Contents)-----72.80 lbs Dimensions----------------18.59 in. x 14.59 in. x 8.30 in. Shipping and Storage Data: Hazard Class/Division And SCSG-----------------1.4S DOT Class--------------------Class C Explosives DOT Marking----------------SMALL ARMS AMMUNITION Drawings: Assembly------------------5303620 Packing (inner)-----------5303630-3 Packing (outer)-----------5303630-2

CARTRIDGE, 9MM FX MARKING (BLUE)

Type Classification: Std Use: The Cartridge, 9mm FX Marking, Blue is designed to be utilized with the M4A1 Carbine, M16, MEUSOC .45 and M9 Special Effects Small Arms Marking System (SESAMS) Adapter Kits. Use of the Cartridge, 9mm FX Marking round provides an effective close-range, force-on-force training system. Description: The Cartridge, 9mm FX Marking complete round is made up of a 9mm Brass Case, a Plastic Sabot and a 7.62mm Plastic Projectile. The Plastic Projectile contains a blue colored marking compound. When fired from the M4A1 Carbine Adapter Kit, they have a muzzle velocity of about 550 fps at 70 degrees Fahrenheit with accuracy of a 10-round group having a mean radius of no greater than 3 inches at a distance of 30 ft. Tabulated Data: Weight---------------0.030 lbs Length---------------1.12 in. Diameter-------------0.39 in. Federal Supply Code: NSN-------------------------1305-01-449-3208 DODIC----------------------AA21

Unit of Issue: Each Packed-------------------50 per Fiber Container/ 3,800 Per Metal Box Packing Data: Metal Box: Weight (w/Contents)-----72.80 lbs Dimensions----------------18.59 in. x 14.59 in. x 8.30 in. Shipping and Storage Data: Hazard Class/Division And SCSG-----------------1.4S DOT Class--------------------Class C Explosives DOT Marking----------------SMALL ARMS AMMUNITION Drawings: Assembly------------------5305560 Packing (inner)-----------5305570 Packing (outer)-----------5305590

CARTRIDGE, 12 GAGE, BEAN BAG, NON-LETHAL

Type Classification: Std Use: The Cartridge, 12 Gage, Bean Bag Round is intended for use in crowd control situations where the use of Non-Lethal force is desired. Description: The 12 Gage Bean Bag Round is manufactured in accordance with industry standards and with commercial color finish. The cartridge contains smokeless propellent and does not contain black powder. The projectile consist of one lead shot filled fabric bag. The projectile weighs between 585 grains and 685 grains. Tabulated Data: DODAC-------------------1305-AA29 UNO serial number------0012 UNO proper shipping Name

Cartridge, Small Arms Weight----------------------770 grains Length--------------------2.45 in Primer--------------------Percussion Propellant: Type----------------------Smokeless Weight-------------------3.4 grains Chamber Pressure………13,000 PSI Velocity………………..300 FPS (approx) Maximum Range……...150 Ft Max Effective Range…..50 Ft

Federal Supply Code: NSN-------------------------1305-01-454-0191 DODIC----------------------AA29 Unit of Issue: Each Packed-----------------------160 per Metal Can/ 320 Per Wooden Box Packing Data: Wooden Box: Weight (w/Contents)-----55.5 lbs Dimensions----------------14-50 in. x 12.75 in. x 8.38 in. Shipping and Storage Data: Hazard Class/Division And SCSG-----------------1.4S UNO serial number----------0012 DOT class---------------------Class C Explosives DOT marking-----------------SMALL ARMS AMMUNITION Drawings: Assembly------------------HS/4083/C97/1127 (item mfg to performance specification above) Packing (intermediate)...9396197-3 Packing (inner)-----------9396196-3 Packing (outer)-----------9396206

References: MIL-STD-129M MIL-STD-636 MIL-STD-644A MIL-STD-1167C MIL-STD-1168A MIL-STD-1322 DOD-STD-2101

CARTRIDGE, 12 GAGE, LAUNCHING, FOR GRENADE, NON-LETHAL

Type Classification: Std Use: The Cartridge, 12 Gage, Launching Round is intended for use in conjunction with the Grenade, Rubber Ball, Non-Lethal and the Grenade, Practice Non-Lethal. The 12 Gauge Launching Round is intended for use in crowd control situations where the use of Non-Lethal force is desired. Description: The 12 Gage Launching Round is manufactured in accordance with industry standards and with commercial color finish. The Propellent contained within the cartridge, is a mixture of smokeless powder and black powder in a ratio of approximately 3:1. The Cartridge is assembled with a roll crimp with end wad. Tabulated Data: DODAC-------------------1305-AA30 UNO serial number------0014 UNO proper shipping Name Cartridge, Small Arms, Blank Weight----------------------210 grains Length--------------------2.00 in Primer--------------------Percussion

Propellant: Type----------------------Smokeless/Black Weight-------------------37.6 grains Federal Supply Code: NSN-------------------------1305-01-454-0187 DODIC----------------------AA30 Unit of Issue: Each Packed--------------------5 per Fiberboard Box

160 per Metal Can/ 320 Per Wooden Box Packing Data: Wooden Box: Weight (w/Contents)-----29.9 lbs Dimensions----------------14-50 in. x 12.75 in. x 8.38 in. Shipping and Storage Data: Hazard Class/Division And SCSG-----------------1.4S UNO serial number----------0014 DOT class---------------------Class C Explosives DOT marking-----------------SMALL ARMS AMMUNITION

Reference: MIL-STD-129M MIL-STD-636 MIL-STD-644A MIL-STD-1167C MIL-STD-1168A MIL-STD-1322 DOD-STD-2101

CARTRIDGE, 12 GAGE, RUBBER, FIN STABILIZED, NON-LETHAL

Type Classification: Std Use: The Cartridge, 12 Gage Rubber Fin Stabilized Round is intended for use in crowd control situations where the use of Non-Lethal force is desired. Description: The 12 Gage Rubber Fin Stabilied Round is manufactured in accordance with industry standards and with commercial color finish. The cartridge contains smokeless propellent and does not contain black powder. The projectile consist of one rubber projectile that weighs between 110 grains and 120 grains. The projectile is constructed with fins for stabilization and has a hardness of 70 to 80 Durometer “A” scale. Tabulated Data: DODAC-------------------1305-AA31 UNO serial number------0012 UNO proper shipping Name:

Cartridge, Small Arms Weight----------------------140 grains Length--------------------2.45 in Primer--------------------Percussion

Propellant: Type----------------------Smokeless Weight-------------------7.7 grains Chamber Pressure………13,000 PSI Velocity………………..500 FPS (approx) Maximum Range……...250 Ft Max Effective Range….100 Ft Federal Supply Code: NSN-------------------------1305-01-454-0189 DODIC----------------------AA31 Unit of Issue: Each Packed--------------------5 per Fiberboard Box

160 per Metal Can/ 320 Per Wooden Box Packing Data: Wooden Box: Weight (w/Contents)-----26.7 lbs Dimensions----------------14-50 in. x 12.75 in. x 8.38 in. Shipping and Storage Data: Hazard Class/Division And SCSG-----------------1.4S UNO serial number----------0012 DOT class---------------------Class C Explosives DOT marking-----------------SMALL ARMS AMMUNITION

Drawings: Assembly------------------HS/4083/C97/1135 (item mfg to performance specification above) Packing (intermediate)...9396197-4 Packing (inner)-----------9396196-4 Packing (outer)-----------9396206 Reference: MIL-STD-129M MIL-STD-636 MIL-STD-644A MIL-STD-1167C MIL-STD-1168A MIL-STD-1322 DOD-STD-2101

CARTRIDGE, 5.56MM JACKETED FRANGIBLE

Type Classification: Std Use: The Cartridge, 5.56mm Jacketed Frangible is intended for use against personnel without collateral damage. The 5.56mm Jacketed Frangible is intended to penetrate soft targets with the projectile breaking up on impact with hard targets. Description: The 5.56mm Jacketed Frangible is manufactured in accordance with industry standards and with commercial color finish. Function: The 5.56mm Jacketed Frangible round has a 100% Lead Free Surgical grade tungsten, copper and nylon composite, copper jacketed projectile intended to penetrate soft targets and break up on impact with hard targets to reduce the effects of collateral damage. Tabulated Data: Weight----------------------170 grains Length--------------------2.205 in Primer--------------------Percussion Propellant: Type----------------------Flash suppressed, Double Based Ball Powder Weight-------------------27 grains Projectile: Weight-------------------45 grains Jaketed Frangible

Performance: Chanber Pressure---------52,000 psi Velocity--------------------3390 ft/sec Federal Supply Code: NSN-------------------------1305-01-463-8232 DODIC----------------------AA40 Unit of Issue: Each Packed-----------------------820 per Metal Can/ 1640 Per Wooden Box Packing Data: Wooden Box: Weight (w/Contents)-----29.9 lbs Dimensions----------------14-50 in. x 12.75 in. x 8.38 in. Shipping and Storage Data: UN serial number---------0012 UN proper shipping Name--------------------Cartridge, Small Arms Hazard Class/Division And SCSG-----------------1.4S Drawings: Assembly------------------P02147 Packing (inner)-----------K7001 Packing (outer)-----------K7002 References: MIL-STD-636 MIL-STD-1168

CARTRIDGE, 5.56MM Special Match, MK 262 MOD 0

Type Classification: Std Use: The Cartridge, 5.56mm Special Match is intended for Match Shooting with the M16A2 Service Rifle. Description: The 5.56mm Special Match is manufactured in accordance with industry standards and with commercial color finish. Function: The 5.56mm Special Match round has a copper jacketed projectile intended for match shooting as well as for tactical purposes. Tabulated Data: Weight----------------------190 grains Length--------------------2.26 in Primer--------------------Percussion Propellant: Type----------------------Flash suppressed, Double Based Ball Powder Weight-------------------23 grains Projectile: Weight-------------------77 grains Performance: Chamber Pressure---------58,300 psi Velocity--------------------2720 ft/sec

Federal Supply Code: NSN-------------------------1305-01-474-3856 NSN-------------------------1305-01-497-9996 DODIC----------------------AA53 Unit of Issue: Each Packed For NSN 1305-01-474-3856-----------50 per Fiberboard, Box/500 Per Fiberboard Box For NSN 1305-01-497-9996--------20 per carton/820 per M2A1 Metal Can/1640 per Wirebound Box Packing Data: For NSN 1305-01-474-3856 Fiberboard Box: Weight (w/Contents)-----16.2 lbs Dimensions----------------13.63 in. x 5.19 in. x 5.38 in. For NSN 1305-01-497-9996 M2A1 Metal Can: Weight (w/Contents)-----33.5 lbs Dimensions----------------12.03 in. x 6.09 in. x 7.50 in. Wirebound Box: Weight (w/contents)------74.5 lbs. Dimensions----------------14.44 in x 12.53 in X 8.13 in. Shipping and Storage Data: Hazard Class/Division And SCSG-----------------1.4S UN Serial Number------0012 UN Proper Shipping Name:

Cartridge, Small Arms

Drawings: Assembly-------------------53711-7379740 Packing (inner)------------53711-7379728 Packing (outer)------------53711-7379728 References: MIL-STD-636 MIL-STD-1168

CARTRIDGE, 5.56MM Special Match, MK 262 MOD 1

Type Classification: Std Use: The Cartridge, 5.56mm Special Match is intended for Long Range Match Shooting with the M16A2 Service Rifle. Description: The 5.56mm Special Match is manufactured in accordance with industry standards and with commercial color finish. Function: The 5.56mm Special Match round has a copper jacketed cannelured projectile intended for match shooting as well as for long range tactical purposes. Tabulated Data: Weight----------------------190 grains Length--------------------2.26 in Primer--------------------Percussion Propellant: Type----------------------Flash suppressed, Double Based Ball Powder Weight-------------------25 grains Projectile: Weight-------------------77 grains Performance: Chamber Pressure---------58,300 psi Velocity--------------------2720 ft/sec

Federal Supply Code: NSN-------------------------1305-01-01-507-7511 DODIC----------------------AA53 Unit of Issue: Each Packed-----------------------20 per Fiberboard Box/820 Per M2A1 Metal Can/1640 per Wirebound Box Packing Data: M2A1 Metal Can: Weight (w/Contents)-----33.5 lbs Dimensions----------------12.03 in. x 6.09 in. x 7.50 in. Wirebound Box: Weight (w/Contents)-----74.5 lbs Dimensions----------------14.44 in. x 12.53 in. x 8.13 in. Shipping and Storage Data: Hazard Class/Division And SCSG-----------------1.4S UN Serial Number------0012 UN Proper Shipping Name:

Cartridge, Small Arms

Drawings: Assembly-------------------53711-7379740 Packing (inner)------------53711-7379728 Packing (outer)------------53711-7379728 References: MIL-STD-636 MIL-STD-1168

DUMMY CARTRIDGE, 12 GAUGE SHOTGUN, MK 242 MOD 0

Type Classification: Std Use: For use in all 12 gauge shotguns. The cartridge is used for practice in loading for simulated firing and testing the mechanism of the weapon. Description: The 12 gauge Dummy cartridge is identified by a recessed primer. Tabulated Data: Weight---------------------------770 grains Length----------------------------2.50 in Primer--------------------------------N/A Propellant: N/A-----------------------------------N/A Federal Supply Code: NSN-------------------------1305-01-380-3255 DODIC-------------------------------------AA55 Also see Navy NALC------------------CWDC

Unit of Issue: Each Inner Pack----------------25 per Fiberboard Box Outer Pack--------------250 per Fiberboard Box Packing Data: Wooden Box: Weight (w/Contents)-----28.52 lbs Dimensions----------------21.0 in.x 5 in x 4.50 in. Shipping and Storage Data: Hazard Class/Division And SCSG----------------Inert UN Serial Number----------N/A UN Proper Shipping Name: NONEXPLOSIVE AMMUNITION Drawings: Assembly------------------P04085OC Packing (inner)-----------Commercial Packing (outer)-----------Commercial References: MIL-STD-636 MIL-STD-1168

CARTRIDGE, 5.56MM Special Match, Molybdenum Coated

Type Classification: Std Use: The Cartridge, 5.56mm Special Match is intended for Match Shooting with the M16A2 Service Rifle. Description: The 5.56mm Special Match is manufactured in accordance with industry standards and with commercial color finish. The projectile has a Molybdenum (moly) coating, which acts as a lubricant. Note: The molybdenum coating leaves deposits throughout the barrel of the weapon which requires special solvents for removal. Function: The 5.56mm Special Match round has molybdenum coated copper jacketed projectile intended for match shooting. The cartridge can be used for tactical purposes however, because of the special cleaning solvent requirements, it is not recommended. Tabulated Data: Weight----------------------190 grains Length--------------------2.26 in Primer--------------------Percussion Propellant: Type----------------------Flash suppressed, Double Based Ball Powder Weight-------------------25 grains Projectile: Weight-------------------77 grains Jacketed

Performance: Chamber Pressure---------58,300 psi Velocity--------------------2720 ft/sec Federal Supply Code: NSN-------------------------1305-01-492-7605 DODAC--------------------1305-AA67 Unit of Issue: Each Packed-----------------------50 per Fiberboard Box/500 Per Fiberboard Box Packing Data: Fiberboard Box: Weight (w/Contents)-----16.2 lbs Dimensions----------------13.63 in. x 5.19 in. x 5.38 in. Shipping and Storage Data: Hazard Class/Division And SCSG-----------------1.4S DODAC-------------------1305-AA67 UN Serial Number------0012 UN Proper Shipping Name:

Cartridge, Small Arms Drawings: Assembly-------------------53711-7546726 Packing (inner)------------53711-7379728 Packing (outer)------------53711-7379728 References: MIL-STD-636 MIL-STD-1168

PRIMER, PERCUSSION W209

Type Classification: Std Use: The Percussion Cap Primer is used to initiate a Blasting Cap/Detonator or igniter charge. It is issued separately for repriming firing devices used with regular practice mines, improvised practice mines or booby traps as well as demolition firing devices. Description: The No. 209 Percussion Primer consists of a rimmed battery cup approximately .24 inches in diameter and .30 inches in length. It has an inverted primer cup loaded with .88 grains of lead styphinate pressed into one end and a flash hole approximately .095 inches in diameter at the opposite end. Functional Description: After the primer is loaded into the firing device, a firing pin strikes the primer cup. This impact ignites the lead styphinate charge which will emit a small but intense flame through the flash hole which will initiate the blasting cap/detonator or igniter charge. Tabulated Data: Weight----------------------.0022 lbs Length--------------------0.30 in Diameter-----------------0.32 in. Explosive: Type---------------------Lead Styphinate Tetracene Type, Mixture No. 955 Weight-------------------------0.88 grains

Federal Supply Code: NSN (Military Pack) ------1390-01-466-9197 (Commercial Pack)------1390-01-283-8242 DODIC-----------------------AX14 Unit of Issue: Each Packed (Military Pack)--3000 per Metal Can/ 6000 per Wooden Box (Commercial Pack)---5000 per Fiberboard Box Packing Data: Military Pack: M2A1 Metal box: Weight (w/Contents)-----14.62 lbs Dimensions----------------12.03 in. x 6.09in. x 7.50 in Wooden Box: Weight (w/Contents)-----36.74 lbs Dimensions----------------14-44 in. x 12.53in. x 8.12 in. Commercial Pack: Fiberboard Box: Weight (w/Contents)-----15.50 lbs Dimensions----------------15.0 in. x 7.0 in. x 7.0 in. Shipping and Storage Data: Hazard Class/Division And SCSG--------Military Pack-------------1.4S Commercial Pack--------1.4C UN Serial Nnumber---------------------------0044 DOT class---------------------Class C Explosives DOT marking-----------------Primers, Cap Type Drawings: Assembly----------------------1371AS106 Inner Pack---------------------7402312 Outer Pack---------------------7402313

CARTRIDGE, 40MM, FOAM RUBBER BATON, NON-LETHAL


Std Use:

The 40mm Foam Rubber Baton cartridge is intended for use in scenarios where the use of lethal incapacitating force is not warranted because of various operational considerations. The cartridges are intended for use in the M203 Grenade Launcher. Description:

The cartridge contains three foam rubber batons in an aluminum cartridge case. The foam rubber batons have a nominal velocity of 325 ft/sec at a distance of 3 feet from the muzzle of the M203 grenade launcher. The cartridge contains a standard 209 shotgun primer and approximately 13.0 grains of double base smokeless propellant. Each foam rubber baton weighs 250 grains minimum and 280 grains maximum. The hardness of each foam rubber baton is 25∀10 in Durometer A scale. Three foam rubber batons are separated from the propellant by an over powder wad and a gas check plastic, and enclosed in the cartridge case by a felt washer and an

Functioning:

The primer is initiated by the firing pin of the weapon and the propellant is ignited. The burning propellant causes a build up of gas pressure where the frictional force holding the projectile in place are overcome and the projectile is propelled from the cartridge case, through the bore of the weapon towards the intended target. Tabulated Data: Dimensions:

Weight . . . . . . . . . . . . . . . . 0.443 lbs. Length . . . . . . . . . . . . . . . . 4.789 in. Case Diameter . . . . . . . . . . 1.59 in. Rim Diameter . . . . . . . . . . .1.721 in.

Propellant:

Smokeless, Double Base . . . 13.0 grains Primer:

Model 209 shotshell primer Federal Supply Code: NSN . . . . . . . . . . . . . . . . . . . 1310-01-453-9168 DODIC . . . . . . . . . . . . . . . . . . . . . . . . . . . BA07

end wad. The cartridge is sealed with polyurethane. The end wad is marked with low light identification.

Unit of Issue: Each Cartridge Packed . . . . . 22 per Metal Can/ 44 per Wooden Box

Packing Data: Wooden Box:

Weight (w/Contents) . . . . . . . . . 36 lbs Dimensions . . . . . . . . 14.50 in. x 12.75

x 8.38 in. Shipping and Storage Data: Hazard Class/Division And SCSG----------------------------------1.4C UN Serial Number . . . . . . . . . . . . . . UN0339 DOT class . . . . . . . . . . . . . . . Class C Explosive DOT marking . . . . CARTRIDGE FOR WEAPONS, INERT PROJECTILE Drawings: Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . B-8789 Packing (Wirebound Box) . . . . . . . . . . 7232152 Packing (M2A1 Can) . . . . . . . . . . . . . 7232153 References: MIL-STD-109 MIL-STD-129M MIL-STD-644A MIL-STD-1167C MIL-STD-1168A MIL-STD-1322 DOD-STD-2101

CARTRIDGE, 40MM, RUBBER BALL, NON-LETHAL


Std Use:

The 40mm Rubber Ball cartridge is intended for use in scenarios where the use of lethal incapacitating force is not warranted because of various operational considerations. The cartridges are intended for use in the M203 Grenade Launcher. Description:

The cartridge contains twenty two each .60 cal. rubber balls in an aluminum cartridge case. The rubber balls have a nominal velocity of 325 ft/sec at a distance of 3 feet from the muzzle of the M203 grenade launcher. The cartridge contains a Model 209 shotshell primer and approximately 7.3 grains of double base smokeless propellant. Each rubber ball weights nominally 34∀5 grains. The hardness of each rubber ball is 60∀10 in Durometer A scale. The rubber balls are separated from the propellant by an over powder wad and a gas check plastic, and enclosed in the cartridge case by a felt washer and an end wad. The cartridge is sealed with polyurethane. The end wad is marked with low light identification. Functioning:

The primer is initiated by the firing pin of the weapon and the propellant is ignited.

The burning of the propellant caused a build up of gas pressure. The gas pressure reaches a point where the frictional forces holding the projectile in place are overcome and the projectile is propelled through the cartridge case, the bore of the weapon and through the air to the target. Tabulated Data: Dimensions:


Propellant:

Smokeless, Double Base . . . . 7.3 grains Primer:

Model 209 shotshell primer Federal Supply Code: NSN . . . . . . . . . . . . . . . . . . . 1310-01-453-9154 DODIC . . . . . . . . . . . . . . . . . . . . . . . . . . . BA08 Unit of Issue: Each Cartridge Packed . . . . . 22 per Metal Can/ 44 per Wooden Box

Packing Data: Wooden Box: Weight (w/Contents) . . . . . . . . . 36 lbs Dimensions . . . . . . . 14.50 in. x 12.75 x 8.38 in. Shipping and Storage Data: Hazard Class/Division And SCSG----------------------------------1.4C UN Serial Number . . . . . . . . . . . . . . UN0339 DOT class . . . . . . . . . . . . . . . Class C Explosive DOT marking . . . . CARTRIDGE FOR WEAPONS, INERT PROJECTILE References: MIL-STD-109 MIL-STD-129M MIL-STD-644A MIL-STD-1167C MIL-STD-1168A MIL-STD-1322 DOD-STD-2101

Drawings: Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . B-8790 Packing (Wirebound Box) . . . . . . . . . . 7232152 Packing (M2A1 Can) . . . . . . . . . . . . . 7232153

CARTRIDGE, 40MM, WOODEN BATON, NON-LETHAL


Std Use:

The 40mm Wooden Baton cartridge is intended for use in crowd control situations where the use of Non-Lethal force is desired. Description:

The cartridge contains three wooden batons in an aluminum cartridge case. The wooden batons have a nominal velocity of 260 ft/sec at a distance of 3 feet from the muzzle of the M203 grenade launcher. The cartridge contains a Model 209 shotshell primer and approximately 36.3 grains of double base smokeless propellant. Each wooden baton weighs 335 grains minimum. Wooden batons are made of hardwood which is classified as Group IV in MIL-STD-731A. The density of the wood is 40 pounds a cubic foot minimum and 50 pounds a cubic foot maximum at 12 percent moisture content. Three wooden batons are separated from the propellant by an over powder wad and enclosed in the cartridge case by an end wad. The cartridge is sealed with polyurethane. The end wad is marked with low light identification.

Functioning:

The primer is initiated by the firing pin of the weapon and the propellant is ignited. The burning of the propellant caused a build up of gas pressure. The gas pressure reaches a point where the frictional forces holding the projectile in place are overcome and the projectile is propelled through the cartridge case, the bore of the weapon and through the air to the target. Tabulated Data: Dimensions:


Propellant:

Smokeless, Double Base . . . 36.3 grains Primer:

Model 209 shot shell primer

Federal Supply Code: NSN . . . . . . . . . . . . . . . . . . . 1310-01-454-0192 DODIC . . . . . . . . . . . . . . . . . . . . . . . . . . . BA09 Unit of Issue: Each Cartridge Packed . . . . . 22 per Metal Can/ 44 per Wooden Box Packing Data: Wooden Box:


x 8.38 in. Shipping and Storage Data: Hazard Class/Division And SCSG----------------------------------1.4C UN Serial Number . . . . . . . . . . . . . . UN0339 DOT class . . . . . . . . . . . . . . . Class C Explosive DOT marking . . . . CARTRIDGE FOR WEAPONS, INERT PROJECTILE References: MIL-STD-109 MIL-STD-129M MIL-STD-644A MIL-STD-731A MIL-STD-1167C MIL-STD-1168A MIL-STD-1322 DOD-STD-2101 MIL-HDBK-7B

Drawings: Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . B-8788 Packing (Wirebound Box) . . . . . . . . . . 7232152 Packing (M2A1 Can) . . . . . . . . . . . . . 7232153

CARTRIDGE, 40MM, LOW VELOCITY PRACTICE


Std Use:

This cartridge is a fixed practice type ammunition item designed for training use with the M203 Grenade Launcher. Description: This cartridge is a fixed round of ammunition consisting of a metal projectile body with a rotating band and a metal cartridge case. The plastic ogive is filled with 5 grams of a highly visible orange dye. Functioning:

The primer is initiated by the firing pin of the weapon and the propellant is ignited. The burning of the propellant caused a build up of gas pressure. The gas pressure reaches a point where the frictional forces holding the projectile in place are overcome and the projectile is propelled from the cartridge case, through the tube of the weapon at a velocity of 78 meters per second. Upon impact with the target, the plastic ogive fractures and releases the orange dye, simulating an explosive impact . Tabulated Data: Dimensions:

Weight . . . . . . . . . . . . . . . . 0.520 lbs. Length . . . . . . . . . . . . . . . . 3.90 in. Case Diameter . . . . . . . . . . 1.602 in.

Propellant:

Smokeless, Double Base . . . 0.00088 lbs. Primer:

Model DN 4078 shot shell primer

Federal Supply Code: NSN . . . . . . . . . . . . . . . . . . . 1310-01-500-3228 DODIC . . . . . . . . . . . . . . . . . . . . . . . . . . . BA18 Unit of Issue: Each Cartridge Packed . . . . . 50 per Metal Can Packing Data: Metal Can:


x 10.39 in. Shipping and Storage Data: Quantity-Distance Class . . . . . . . . . . . . . . . . 1.4 Storage compatibility group . . . . . . . . . . . . . . S UN Serial Number . . . . . . . . . . . . . . UN0012 DOT class . . . . . . . . . . . . . . . Class C Explosive DOT marking . . . . CARTRIDGE FOR WEAPONS, INERT PROJECTILE

Drawings:

Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . B-8788 Packing (Wirebound Box) . . . . . . . . . . 7232152 Packing (M2A1 Can) . . . . . . . . . . . . . 7232153 References: MIL-STD-109 MIL-STD-129M MIL-STD-644A MIL-STD-731A MIL-STD-1167C MIL-STD-1168A MIL-STD-1322 DOD-STD-2101 MIL-HDBK-7B

CARTRIDGE, 40MM, PRACTICE MK 281 MOD 1 WITH DAY/NIGHT MARKING


Std Use:

This cartridge is a fixed practice type ammunition item designed for training use with the MK19 Grenade Launcher Machine Gun. Description: This cartridge is a fixed round of ammunition consisting of a metal projectile body with a rotating band and a metal cartridge case. The plastic ogive is filled with 5 grams of a highly visible orange dye. Functioning:

The primer is initiated by the firing pin of the weapon and the propellant is ignited. The burning of the propellant caused a build up of gas pressure. The gas pressure reaches a point where the frictional forces holding the projectile in place are overcome and the projectile is propelled from the cartridge case, through the tube of the weapon at a velocity of 78 meters per second. Upon impact with the target, the plastic ogive fractures and releases the orange dye, simulating an explosive impact .

Tabulated Data: Dimensions:

Weight . . . . . . . . . . . . . . . . 0.520 lbs. Length . . . . . . . . . . . . . . . . 3.90 in. Case Diameter . . . . . . . . . . 1.602 in.

Propellant:

Smokeless, Double Base . . . 0.00088 lbs. Primer:

Model DN 4078 shot shell primer

Federal Supply Code: NSN . . . . . . . . . . . . . . . . . . . 1310-01-530-8878 DODIC . . . . . . . . . . . . . . . . . . . . . . . . . . . BA21 Unit of Issue: Each Cartridge Packed . . . . . 32 per PA120 Metal Can Packing Data: PA 120 Metal Can:


x 10.39 in. Shipping and Storage Data: Quantity-Distance Class . . . . . . . . . . . . . . . . 1.4 Storage compatibility group . . . . . . . . . . . . . . S UN Serial Number . . . . . . . . . . . . . . UN0012 DOT class . . . . . . . . . . . . . . . Class C Explosive DOT marking . . . . CARTRIDGE FOR WEAPONS, INERT PROJECTILE

Drawings:

Cartridge . . . . . . . . . . . . . . . . . . . . 53711-8215531 Packing (PA120 Mtl Cn) . . . . . . . .19200-12928042 References: MIL-STD-109 MIL-STD-129M MIL-STD-644A MIL-STD-731A MIL-STD-1167C MIL-STD-1168A MIL-STD-1322 DOD-STD-2101 MIL-HDBK-7B

CARTRIDGE, 81 MILLIMETER: ILLUMINATING, INFRARED (IR), MS16 W/FUZE, MECHANICAL TIME SUPERQUICK, M776


(To be assigned). Use:

This cartridge is an Infrared (IR) Illuminating round developed for use in the I-81MM M252 Mortar System to take advantage of the night vision device and reduce friendly forces exposure to the enemy. Description: The complete round consists of an MTSQ fuze with an expulsion charge, a body tube and tail cone assembly containing an Infrared (IR) illuminant charge and a parachute assembly. The ignitions cartridge with integral percussion primer is assembled to the end of the fin assembly. The propellant charge is contained in four horse-shoe type propellant increments which are assembled around the fin assembly shaft. Functioning: When the cartridge is loaded, it slides down the mortar tube until the percussion primer in the ignition cartridge strikes the firing pin at the bottom of the tube. The percussion primer initiates the charge in the ignitions cartridge. The charge in the ignition

flashes through the holes in the shaft of the fin assembly and ignites the propelling charge. The gases from the burning propellant expand and propel the cartridge out of the mortar tube. The projectile is fin-stabilized in flight. Functioning of the time fuze detonates the expelling charge and the expelling charge separates the cone from the tube allowing the illuminant candle and parachute to fall freely. The parachute deploys to support the burning candle. Tabulated Data: Dimensions:

Weight………. . . . . . . . . . . . . . . . . 9.25 lbs. Length………. . . . . . . . . . . . . . . . . 25.49 in. Case Diameter.……… . . . . . . . . . . 1.602 in.

Projectile:

Body material...………….. . . . Steel, (Tube) Color…………White w/black markings and one orange band. Filler and weight……..……Infrared/2.99 Kg Illumination burn time….……..60 Sec. min.

Components: Ignition cartridge….………………M752A1 Propellant charge……………………..M219 Fin assembly………………………..….M29 Fuze…Mechanical Time Super Quick M772

Limitation: Cartridge cannot be fired at charge 0 (ignition cartridge only). Cartridge cannot be fired in the M1 and the M29 Series Mortar. Temperature Limits: Firing: Lower limit………………….………..-50`F Upper limit………………………….+145`F Storage: Lower limit………………….………..-60`F Upper limit………………………….+160`F Federal Supply Code: NSN . . . . . . . . . . . . . . . . … . ……1315-01-379-1026 DODIC . . . . . . . . . . . . . . . . . . . . . . . . . . ……...C484 Unit of Issue:

Each Cartridge Packed . . . . . .One round per fiber container and three fiber container per metal can.

Shipping and Storage Data: Quantity-Distance Class . . . . . . . . . . . . . . . ……. 1.2 Storage compatibility group . . . .. . . . . . . . . ………G UN Serial Number . . . . . . . . . . . . …..……..UN0171 DOT class . . . . . . . . . . . . . ... ……Class A Explosive DOT marking . . . . …….......Ammunition for cannon w/illuminating projectile

Cartridge . . . . . . . .. . . . . . . . . . . . ………...12953389 Fiber container (PA114)…………………….9354333 Metal Can (PA157 Mtl Cn) . . . . . . . ……..12944510

DIVERSIONARY CHARGE, MK 141, MOD 0

Type Classification: Security Risk Code (3) 1.2 G Use: The MK 141-0 Charge is deployed as depicted upon each illustrated instructions sheet which is enclosed in each packaged M191A1 Ammunition Box. Summarizing the deployment procedure, upon removal of the charge from the ammunition box, the individually sealed barrier bag and visually inspected, the charge is grasped such to retain security of the lever against the body of the charge. Removal of the safety cotter pins achieved by pulling upon the pull ring attached to the cotter pin. The MK 141 charge should be tossed a minimum of ten (10) feet from the zone of deployment., the main charge output should not viewed directly by personnel deploying the charge and (185) decibel rated hearing protection should be employed to preclude hearing damage. Description: The MK 141 Mod 0 Diversionary Charge is a manually deployed, non-fragmenting hand grenade intended to be used to produce an intense light and sound display for the purpose of disorienting personnel in a myriad of riot, crowd dispersal or hostage rescue applications. Th MK 141-0 Charge consists of two (2) primary components. The base is manufactured from a molded and machined polyurethane foam material enveloped in an aluminum foil wrap for electrostatic discharge (ESD) purposes and contains the photo flash main charge.

The fuze comprised of a 10% glass fiber filled high density polyethylene compound molded and assemble in a comparable configuration to that of a conventional M42/M46 Hand Grenade Fuze. Mating of the two (2) primary components is achieved by torquing the interfacing threads and assembly security is maintained by the application of both a cyanoacrylate adhesive and RTV based sealant. The MK 141-0 Charge explosive train consists of an initiating source, energized by the spring loaded contact of a striker assembly onto the percussion primer. Upon removal of the cotter pin and subsequent release of the lever, two (2) independent pyrotechnic delay trains each followed by a respective output charge and the main charge which produces the audio and visual display of the item. The intent of the initial pyrotechnic delay and output charge is to propel the fuze from the body within a nominal 1.4 seconds duration following release of the lever so that the frangible body will not be consumed in the energy release of the main charge and to ignite the secondary pyrotechnic delay remaining in the body. Upon ignition, the secondary pyrotechnic delay train within the body burns for eighty (80) millisecond minimum duration to assure adequate fuze ejection and, via the secondary output charge, ignites the main charge contained within the body. A summary of the ambient MK 141-0 Charge burn time performance criteria, as determined from the time the striker contacts the percussion primer, is as follows: Fuze Time Delay - 1.260 seconds minimum, Body Time Delay - 0.0080 seconds minimum, MK141-0 Time Delay - 1.340 - 1.840 seconds.

Output of (1) diversionary device measured 5 feet from unit at same height, maximum pressure 5.000 pounds per square inch (DB of 185). Minimum

pressure 2.800 pounds per square inch (DB of 176). Light output is approximately 2 million candlepower for 4 milli-seconds

Tabulated Data: NEW............................................0.039240 lb per unit Propellant................................................0.0000005 lb Length.................................................................5.214 Diameter .............................................................1.770 Unit Weight ......................................................0.22 lb Federal Supply Code: NSN ............................................... 1375-01-387-5748 DODIC ............................................................ DWBS Unit of Issue: Each .............................................. 3 per container Packing Data: Shipping container ......................................... M19A1 Weight gross wt ...................................... 5.18 lbs each Cube..................................................... 0.18 cu ft each Wire bound box contains 4 M19A1 Metal Containers Shipping and Storage Data: Hazard Class/Division ......................................... 1.2G UN Serial number .......................................... UN0429 UN Proper Shipping Name ........ Articles, Pyrotechnic Drawings: Assembly: ...........................................53711-6570654 Packing: ..............................................53711-6990372

FUZE, GRENADE, PRACTICE, NON-LETHAL M201A1-1

Type Classification: Std Use: The Grenade Fuze, M201A1-1 is intended for use with Grenade, Practice Body, Non-Lethal. Description: The grenade fuze is a M201A1-1 delay-detonating fuze. The fuze assembled contains a striker, striker spring, safety lever, safety pin with pull ring, and a detonator assembly. Functioning: Removal of the safety pin permits release of the safety lever. When the safety lever is released, a striker acting under the force of a striker spring forces it away from the grenade body. The striker rotates on its own axis and strikes the percussion primer. The primer initiates the first fire mixture, the fuze delay element and ignition mixture.

Tabulated Data: Fuze: Model(s)-----------------M201A1-1 Type----------------------Pyrotechnic delay- Igniting Ignition Mixture--------Ironoxide, titanium Zirconium Delay time---------------1.7-3.5 sec Weight-------------------1.8 oz Length--------------------3.9 in Color (safety lever)-----Black Safety device---------Pull ring and safety pin Federal Supply Code: NSN-------------------------1330-01-456-5059 DODIC---------------------G874 Unit of Issue: Each Fuze Packed-----------------------70 per Fiberboard Box Packed………………….280 per Packing Data: Wooden Box: Weight (w/Contents)-----25.0 lbs Dimensions----------------14-50 in. x 12.75 in. x 8.38 in.

Shipping and Storage Data: Hazard Class/Division And SCSG-----------------1.4G UN Serial Number-----------0317 DOT class---------------------Class C Explosives DOT marking-----------------Grenade, Practice References: MIL-STD-129 MIL-STD-331 MIL-STD-1167 MIL-STD-1168 DOD-STD-2101 MIL-HDBK-143 Drawings: Assembly------------------201030 Packing………-----------PAK201

GRENADE, HAND, PRACTICE TA SMOKE M83

Type Classification: Security Risk Code (4) 1.4 G Use: The Practice TA Smoke Hand Grenade M83 is a burning type grenade used in training to produce white smoke for screening activities of individuals and small units. It is also used for signaling. Additionally, the Practice TA Smoke Hand Grenade is used in training in lieu of HC Smoke. Troops protection is required when training with smoke producing items. Personnel will mask before entering smoke plume. Description: The M83 Practice TA Smoke Grenade consists of a metal body and a M201A1 fuze. When initiated, the fuze will ignite a 6 gram starting mixture which then ignites the TA smoke mixture. The fuze has a delay of approximately 2 seconds. The grenade will produce white smoke for approximately 45 seconds. Tabulated Data: Grenade with fuze Model……………………………………………M83 Body……………………………………...sheet metal Diameter……………………………………...2.48 in.

Length………………………………………...5.81 in. Unit Weight ......................................................1.44 lb Color………………… Forrest Green with Blue band and light green markings Filler: Type……………………...Terephtalic Acid (TA) Weight…………………………………...80 Lbs. Starter Mixture: Type…………….Nitrocellulose base propellant Weight………………………………….6 grams Fuze: Model…………………………………M201A1 Type………………..Pyrotechnic delay igniting Primer………………………………….M39A1 Ignition Mixture………..Iron Oxide, Titanium, Zirconium Delay Time……………………0.7-2.0 Seconds Weight…………………………………..1.5 oz. Length……………………………………3.9 in. Color…………...Olive Drab w/Black Markings Packing………………….Not Separately Issued Safety Device………..Pull Ring and Safety Pin Federal Supply Code: NSN ............................................... 1330-01-380-0287 DODIC ............................................................... G982

Unit of Issue: Each ....................................1 per Fiber Container …………………………………16 per Wood Box Packing Data: Shipping container .....................................Wood Box Weight gross wt ................................................ 34 lbs Dimensions ...................................... 15” x 13.3” x 7.5 Cube............................................................0.837 cu ft Wire bound box contains 16 Fiber Containers Shipping and Storage Data: Hazard Class/Division ......................................... 1.4G UNO Serial number ....................................... UN0197 UNO Proper Shipping Name ............. Signals, Smoke Drawings: Assembly: ........................................ 81361-13-19-700 Packing (inner)……………………..81361-13-9-120 Packing (outer)……………………..81361-13-19-83

GRENADE, RUBBER BALL NON-LETHAL

Grenade with Twist Locking Grenade without Twist Locking Safety Clip Safety Clip Type Classification: Std Use: The Rubber Ball Non-Lethal Grenade is intended for use in crowd control situations where the use of Non-Lethal force is desired. Description: The grenade body is a rubber sphere that contains a fuze well liner and is filled with a minimum of 100 rubber ball fragments having a minimum diameter of 0.25 inches and have a hardness of 70 to 80 Durometer “A” scale. The grenade fuze is a M201A1-1 delay-detonating fuze. The fuze assembled contains a striker, striker spring, safety lever, safety pin with pull ring, and a detonator assembly. Functioning: Removal of the safety pin permits release of the safety lever. When the safety lever is released, it

is forced away from the grenade body by a striker acting under the force of a striker spring. The striker rotates on its own axis and strikes the percussion primer. The primer initiates the first fire mixture. The fuze delay element, ignition mixture, and grenade starter mixture and output charge are initiated in turn by the preceding component. The grenade body will separate dispelling the rubber ball fragments. The differences in the two grenades pictured above include the addition on the new NSN grenade with a twist locking safety clip for the pull ring and an extended lever. The twist lock safety clip requires the pull ring to be rotated 90 degrees before the ring can be released from the lock. The ring and arming pin can then be pulled from the fuze allowing the lever to be released. The extension to the lever allows the lever to better conform to the shape of the grenade body and reduce the risk of the lever not being inserted into the shotgun mounted launch cup. The inclusion of a pull ring safety clip enables a closer tolerance to be held on the pull pin force. Note: All other technical data remains the same.

Tabulated Data: Grenade (with fuze) Model(s)---------------9590 Body--------------------Rubber Weight-----------------.584 lbs Length-----------------5.25 in Diameter--------------3.125 in Color------------------Black w/white lettering Charge Assembly: Filler----------------------Magnesium, Alum, Potassium Perchlorate Weight-------------------8 grams Fuze: Model(s)-----------------M201A1-1 Type----------------------Pyrotechnic delay- Igniting Ignition Mixture--------Iron oxide, titanium Zirconium Delay time---------------1.7-3.5 sec Weight-------------------1.8 oz Length--------------------3.9 in Color (safety lever)-----Black Packing-------------------Not separately issued Safety device------------Pull ring and safety pin Federal Supply Code: DODIC----------------------GG04 NSN-------------------------1330-01-454-0132 (without Twist Locking Safety Clip) NSN-------------------------1330-01-503-1036 (with Twist Locking Safety Clip) Unit of Issue: Each Grenade Packed-----------------------6 per Metal Can/ 12 Per Wooden Box Packing Data: Wooden Box: Weight (w/Contents)-----25.0 lbs Dimensions----------------14-50 in. x 12.75 in. x 8.38 in.

Shipping and Storage Data: Hazard Class/Division And SCSG-----------------1.4G UN Serial Number-----------0452 DOT class---------------------Class C Explosives DOT marking-----------------Grenade, Practice References: MIL-STD-129 MIL-STD-331 MIL-STD-1167 MIL-STD-1168 DOD-STD-2101 MIL-HDBK-143 Drawings: Assembly------------------925011 Fuze------------------------201030 Packing (inner)-----------9396205 Packing (outer)-----------9396206

GRENADE, PRACTICE, BODY, NON-LETHAL

Type Classification: Std Use: The Grenade. Practice, Body, Non-Lethal is the practice version of the GG04, Rubber Ball, Non-Lethal Grenade. Description: The grenade body is a rubber sphere that contains a fuze well liner and is filled with .50 CAL Rubber Pellets. The rubber ball pellets remain within the body. Note: The GG04 Practice Grenade Body will be phased out and replaced by the GG13 Practice Grenade Body, which is scheduled to enter the inventory during Fiscal Year 2004.

Tabulated Data: Grenade (without fuze) Body--------------------Rubber Weight-----------------.584 lbs Length-----------------5.25 in Diameter--------------3.125 in Color------------------Blue w/white lettering Federal Supply Code: NSN-------------------------1330-01-454-0099 DODIC----------------------GG05 Unit of Issue: Grenades Packed-----------------------35 per Barrier Bag in Cardboard Box

Packing Data: Wooden Box: Weight (w/Contents)-----25.0 lbs Dimensions----------------14-50 in. x 12.75 in. x 8.38 in. Shipping and Storage Data: Hazard Class/Division And SCSG-----------------Not Required UNO serial number----------Not Required DOT class---------------------Not Required DOT marking-----------------Grenade, Practice, Body, Inert References: MIL-STD-129 MIL-STD-331 MIL-STD-1167 MIL-STD-1168 DOD-STD-2101 MIL-HDBK-143 Drawings: Assembly------------------920014 Packing (inner)-----------Commercial Packing (outer)-----------Commercial

GRENADE, PRACTICE, BODY, NON-LETHAL

Type Classification: Std Use: The Grenade. Practice, Body, Non-Lethal is the practice version of the GG04, Rubber Ball, Non-Lethal Grenade. Description: The GG13 practice grenade body is designed for use with the GG14 practice grenade fuze to provide a reusable training device that will replicate the flight and function of the GG04 rubber ball grenade. It is specifically designed to be launched from a 12Ga. Mossberg 500A2 shotgun equipped with an aluminum launch cup. The fuze block is designed to remain with the practice grenade body and to enhance the visible signature produced by the GG14 practice grenade fuze when the fuze is initiated. The practice grenade body will accept only the GG14 practice grenade fuze because of its left-hand thread design. Design flight distance when used

with the launch cup and 12Ga. launch round (DODIC AA30) is 200 feet + 25 feet. The grenade body is designed to be reused up to 25 times. Tabulated Data: Grenade (without fuze) Body--------------------Rubber Weight-----------------.584 lbs Length-----------------5.25 in Diameter--------------3.125 in Color------------------Blue w/white lettering Federal Supply Code: NSN-------------------------1330-01-504-2866 DODIC----------------------GG13 Unit of Issue: Grenades Packed-----------------------6 Grenade Bodies per

M2A1 Metal Can/12 per Wirebound Box

Packing Data: Wooden Box: Weight (w/Contents)-----28.8 lbs Dimensions----------------14-50 in. x 12.75 in. x 8.38 in. Shipping and Storage Data: Hazard Class/Division And SCSG-----------------Not Required UNO serial number----------Not Required DOT class---------------------Not Required DOT marking-----------------Grenade, Practice, Body, Inert References: MIL-STD-129 MIL-STD-331 MIL-STD-1167 MIL-STD-1168 DOD-STD-2101 MIL-HDBK-143 Drawings: Assembly-----------53711-7624792 Packing (inner)----53711-7308221 Packing (outer)----53711-7308222

Shipping and Storage Data: Hazard Class/Division And SCSG-----------------1.4G UN Serial Number-----------0317 DOT class---------------------Class C Explosives DOT marking-----------------Grenade, Practice References: MIL-STD-129 MIL-STD-331 MIL-STD-1167 MIL-STD-1168 DOD-STD-2101 MIL-HDBK-143 Drawings: Assembly------------------53711-7624785 Packing-------------------- 53711-7546862

FUZE, GRENADE, PRACTICE, NON-LETHAL MK 439 MOD 0

Type Classification: Std Use: The new GG14 practice grenade fuze is specifically designed to replicate the action of the rubber ball grenade (DODIC GG04) when the fuze (issued separately) is mated with the new practice grenade body (DODIC GG13). Description: The fuze and body are produced with left-hand threads to prevent the GG14 from being used with any other grenade. Total time delay for the GG14 is 3.0 seconds + 0.5 seconds. The GG14 has the same physical characteristics as the fuze contained in the rubber ball grenade GG04 but it does not separate from the body after fuze activation. The GG14 produces an audible and visible indication of final initiation following the 3 second time delay. Functioning: Removal of the safety pin permits release of the safety lever. When the safety lever is released, a striker acting under the force of a striker spring forces it away from the grenade body. The striker rotates on its own axis and strikes the percussion primer. The primer initiates the first fire mixture, the fuze delay element and ignition mixture.

Tabulated Data: Fuze: Model(s)-----------------MK 439, MOD 0 Type----------------------Pyrotechnic delay- Igniting Ignition Mixture--------Ironoxide, titanium Zirconium Delay time---------------1.7-3.5 sec Weight-------------------1.8 oz Length--------------------3.9 in Color (safety lever)-----Blue with Brown Band Safety device------------Pull ring and Twist locking safety clip Federal Supply Code: NSN-------------------------1330-01-504-2991 DODIC---------------------GG14 Unit of Issue: Each Fuze Packed-----------------------40 per M2A1 Metal Can Packed…………………..80 per Wirebound Box Packing Data: Wooden Box: Weight (w/Contents)-----25.0 lbs Dimensions----------------14-50 in. x 12.75 in. x 8.38 in.

ROCKET, ENCASED, SHOULDER LAUNCHED MULTI-PURPOSE ASSAULT WEAPON, NOVEL EXPLOSIVE (SMAW NE), 83MM, MK 80 MOD 0


Std Use:

The Rocket, 83mm Novel Explosive (NE) MK 80 Mod 0 (SMAW) is designed for use against earth and timber bunkers and solid concrete/triple brick walls, it also has the capability to penetrate solid brick, brick faced hollow block, and other light clad walls to detonate on the back side. Description:

The rocket is an unguided, enhanced blast explosive rocket contained in a disposable one-shot rocket container. The container protects the rocket during storage, transportation, and field handling. It also functions as an integral part of the launcher in the weapon configuration. Functioning:

The encased rocket is mated to the Mk 153 Mod 0 Launcher both mechanically and electrically with one simple twist locking motion. The six 9mm spotting rounds, located in a magazine stored on the front-end cap, are used to enhance the first round hit probability of the rocket. After firing the rocket, the encasement is removed and discarded.

. Tabulated Data: Dimensions:

Weight . . . . . . . . . . . . . . . …... 18.9 lbs. Length . . . . . . . . . . . . . . . . ... 31.943 in. Case Diameter . . . . . . . . . . …… 6.4 in.

Federal Supply Code: NSN . . . . . . . . . . . . . . . . . . … 1340-010-503-0809 DODIC . . . . . . . . . . . . . . . . . . . . . . . . . . … HA34 Unit of Issue: Each Cartridge Packed . . . . . 2 per Fiberboard box/ 2 Fiberboard boxes per Wirebound Box/ 4 Wirebound boxes per pallet Packing Data: Fiberboard Box: Weight (w/Contents)………………30 lbs Dimensions………………36 in. x 18.5 in. x 6.75 in. Wirebound Box:

Weight (w/Contents) . . . . . . . . . 121.6 lbs Dimensions . . . . . . . . 38.75 in. x 13.25 in.

x 15.25 in. Pallet Load: 4 containers per pallet Weight (w/Contents)……………..544 lbs Dimensions…………..38.75 in. x 38.50 in. X 36.00 in. Shipping and Storage Data: Quantity-Distance Class . . . . . . . . . …….. . . . .. . 1.2 Storage compatibility group . . . . . . . . . .. ……. . . . E UN Serial Number . . . . . . . . . . . . . ………. UN0182 TRANS NEW (LBS) .. . . . . . . . . . . ……….4.975120 STORAGE NEW (LBS) . . . .. . . . . ……….4.975120 EX . . . . . . . . . . . . …….………………..2003080126 DOT marking . . .………………………...ROCKETS

Drawings:

Cartridge . . . . .. . . . . . . . . .. . . . . . . . 82A5027A2375 Packing (Fiberbaord Box) . . . . . . . . 82A5027A2371 Packing (Wirebound Box). . . . . . . . . 82A5027A2370 Pallet (Wood)………………………..82A5027A2365

References:

NWSC/CR/RDTR-96, Revision “Y” NAVSEA OP 5 Volume 1, Seventh Revision, Chg. 3 Packaging Digest for Marine Corps Ammunition and Explosive Ashore Safety Regulations for Handling, Storing Production and Shipping Prime Item Product Fabrication Specification for Rockets, Encased SMAW-NE MK 80 Mod 0 WS-33735, Code Indent 01365

ROCKET, ENCASED, SHOULDER LAUNCHED MULTI-PURPOSE ASSAULT WEAPON, (SMAW), 83MM, MK 3 MOD 0


Std Use:

The Rocket, 83mm Assault MK3 Mod 0 (SMAW) is designed especially for use against reinforced concrete, sandbag and timber bunkers, brick and block walls, and lightly armored vehicles.

Description:

The SMAW is an unguided, dual mode, high explosive rocket contained in a disposable one-shot rocket container. The container protects the rocket during storage, transportation, and field handling. It also functions as an integral part of the launcher in the weapon configuration. Functioning:

The encased rocket is mated to the Mk 153 Mod 0 Launcher both mechanically and electrically with one simple twist locking motion. The six 9mm spotting rounds, located in a magazine stored inside the front-end cap, are used to enhance the first round struck probability of the rocket. The spotting rounds and the rocket are ballistically matched. After firing the rocket, the encasement is removed and discarded.

Tabulated Data: Dimensions:

Weight . . . . . . . . . . . . . . . …....... 13 lbs. Length . . . . . . . . . . . . . . . . ....... 29.37 in. Case Diameter . . . . . . . . . . …… 5.32 in.

Federal Supply Code: NSN . . . . . . . . . . . . . . . . …….. . . 1340-01-158-0577 DODIC . . . . . . . . . . …………………………..HX05 Unit of Issue: Each Cartridge Packed . . . . . 3 per fiberboard box/ 2 Fiberboard boxes per Wirebound Box/ 4 Wirebound boxes per pallet Packing Data: Fiberboard Box: Weight (w/Contents)………….........61 lbs Dimensions……………..36.5 in. x 18.5 in. x 6.75 in. Wirebound Box:

Weight (w/Contents) . . . . . . . . . 142 lbs Dimensions . . . . . . . . 39.38 in. x 20.12 in.

x 16 in. Pallet Load: 4 containers per pallet Weight (w/Contents)……………..630 lbs Dimensions…………..39.38 in. x 40.25 in. X 37.50 in. Shipping and Storage Data: Quantity-Distance Class . . . . . . . . . …….. . . . .. . 1.1 Storage compatibility group . . . . . . . . . .. ……. . . . E UN Serial Number . . . . . . . . . . . . . ………. UN0181 TRANS NEW (LBS) . . . . . . . . . . . ….…...3.323160 STORAGE NEW (LBS) . . . .. . . .. ……….3.323160 EX . . . . . . . . . . . . ……. ……………... 1987110633 DOT marking . . .………………………...ROCKETS

Drawings:

Cartridge . . . . .. . . . . . . . . . . . . . .. . . 82A5027A0220 Packing (Fiberboard Box) . . . . . .. . . 82A5027A0201 Packing (Wirebound Box) . . . . .. . . . 82A5027A0201 Pallet (Wood)………………………..82A5027A0200

References:

NWSC/CR/RDTR-96, Revision “Y” NAVSEA OP 5 Volume 1, Sixth Revision, Chg. 4 Packaging Digest for Marine Corps Ammunition and Explosive Ashore Safety Regulations for Handling, Storing Production and Shipping Prime Item Product Fabrication Specification for Rockets, Encased SMAW-NE MK 80 Mod 0 WS-33735, Code Indent 01365



Std Use:

The Rocket, 83mm High-Explosive Anti-Armor (HEAA) MK6 Mod 0 (SMAW) is designed especially for use against main battle tanks and other armored vehicles.

Description:

The rocket is an unguided, high explosive anti-armor rocket contained in a disposable one-shot rocket container. The container protects the rocket during storage, transportation, and field handling. It also functions as an integral part of the launcher in the weapon configuration. Functioning:

The encased rocket is mated to the Mk 153 Mod 0 Launcher both mechanically and electrically with one simple twist locking motion. The six 9mm spotting rounds, located in a magazine stored on the front-end cap, are used to enhance the first round struck probability of the rocket. The spotting rounds and the rocket are ballistically matched. After firing the rocket, the encasement is removed and discarded. Tabulated Data: Dimensions:

Weight . . . . . . . . . .. . . . . …........13.991 lbs. Length . . . . . . . . . . . . . . . ....... …..32.22 in. Case Diameter . . .. . . . . . . ……....…5.99 in.

Federal Supply Code: NSN . . . . . . . . . . . . . . . .…………1340-01-227-8870 DODIC . . . . . . . . . . . . . . . . . … .... . . . . . . … HX06 Unit of Issue: Each Cartridge Packed . . . . . 3 per fiberboard box/ 2 Fiberboard boxes per Wirebound Box/ 4 Wirebound boxes per pallet Packing Data: Fiberboard Box: Weight (w/Contents)…………...53.72 lbs Dimensions……………36.29 in. x 18.5 in. x 6.75 in. Wirebound Box:

Weight (w/Contents) . . . . . . . . ..131.9 lbs Dimensions . . . . . . . . 38.54 in. x 19.25 in.

x 14.25 in. Pallet Load: 4 containers per pallet Weight (w/Contents)……………..528 lbs Dimensions…………..39.69 in. x 36.69 in. X 31.43 in. Shipping and Storage Data: Quantity-Distance Class . . . . . . . . . …….. . . . .. . 1.1 Storage compatibility group . . . . . . . . . .. ……. . . . E UN Serial Number . . . . . . . . . . . . . ………. UN0181 TRANS NEW (LBS) . . .. . . . . . . . . ….…...2.760000 STORAGE NEW (LBS) . . . .. . . . . ……….2.760000 EX . . . . . . . . . . . . ……. ………………. 1987110641 DOT marking . . . ……………………... ..ROCKETS

Drawings:

Cartridge . . . . .. . . . . . . . . . . . . . . . . 82A5027A0220 Packing (Fiberboard Box). . . . . . . . . 82A5027A0271 Packing (Wirebound Box) . . . . . . . . 82A5027A0271 Pallet (Wood)………………………..82A5027A0270

References:

NWSC/CR/RDTR-96, Revision “P” WS-22467H, Code Ident 01365, Chg. 2 NAVSEA OP 5 VOLUME 1, Sixth Revision, Chg. 4 Packaging Digest for Marine Corps Prime Item Product Fabrication Specification for Rocket, Assault, Encased, 83mm, (SMAW), Mk 6 Mod 0, of 1 December 1993 Ammunition and Explosive Ashore Safety Regulations for Handling, Storing, Production, Renovation and Shipping



Std Use:

The Rocket, 83mm High-Explosive Anti-Armor (HEAA) Practice MK7 Mod 0 (SMAW) Rocket is designed as a practice round for DODICs HX05 and HX06 SMAW rockets.

Description:

The rocket is an unguided, practice rocket contained in a disposable one-shot rocket container. The container protects the rocket during storage, transportation, and field handling. It also functions as an integral part of the launcher in the weapon configuration. Functioning:

The encased rocket is mated to the Mk 153 Mod 0 Launcher both mechanically and electrically with one simple twist locking motion. The six 9mm spotting rounds, located in a magazine stored on the front-end cap, are used to enhance the first round struck probability of the rocket. The spotting rounds and the rocket are ballistically matched Tabulated Data: Dimensions:

Weight . . . . . .. . . . . . . . . …....... 13.991 lbs. Length . . . . . . . . . . . . . . . ..............32.33 in. Case Diameter .. . . . . . . . . ……....…5.99 in.

Federal Supply Code: NSN . . . . . . . . . . . . . . . . ……. . . 1340-01-227-8871 DODIC . . . . . . . . . . . . . . . . . … .... . . . . . . … HX07

Unit of Issue: Each Cartridge Packed . . . . . 3 per fiberboard box/ 2 Fiberboard boxes per Wirebound Box/ 4 Wirebound boxes per pallet Packing Data: Fiberboard Box: Weight (w/Contents)…………...53.72 lbs Dimensions…………….36.5 in. x 18.5 in. x 6.75 in. Wirebound Box:

Weight (w/Contents) . . . . . . . . . 131.9 lbs Dimensions . . . . . . . . 38.54 in. x 19.25 in.

x 14.25 in. Pallet Load: 4 containers per pallet Weight (w/Contents)……………..528 lbs Dimensions…………..39.69 in. x 39.69 in. X 37.29 in. Shipping and Storage Data: Quantity-Distance Class . . . . . . . . . …….. . . . .. . 1.1 Storage compatibility group . . . . . . . . . .. ……. . . . C UN Serial Number . . . . . . . . . . . . . ………. UN0180 TRANS NEW (LBS) . . . . . .. . . . . . ….…...0.907000 STORAGE NEW (LBS) . .. .. . . . . ……….0.907000 EX . . . . . . . . . . . . …….. ……………….1987110642 DOT marking . . . .…………….………... ROCKETS

Drawings:

Cartridge . . . . .. . . . . .. . . . . . . . . . . . 82A5027A0220 Packing (Fiberboard Box) .. . . . . . . . 82A5027A3401 Packing (Wirebound Box) . . . . . . . . 82A5027A3401 Pallet (Wood)………………………..82A5027A3400

References:

NWSC/CR/RDTR-96, Revision “Y” NAVSEA OP 5 Volume 1, Seventh Revision, Chg. 3 Packaging Digest for Marine Corps Ammunition and Explosive Ashore Safety Regulations for Handling, Storing Production and Shipping Prime Item Product Fabrication Specification for Rockets, Encased SMAW-NE MK Mod 0 WS-33735, Code Indent 01365

ROCKET MOTOR, 5 INCH

Type Classification: Std Use: The MK 22 MOD 4 rocket motor used with the MK 2 MOD 0 and MK 1 MOD 0 mine clearance systems has been specifically designed to tow M58HE, M59HE, M68 inert and M69 inert linear demolition charges from the container across the breaching point of a minefield. Description: The MOD 4 rocket motor has forward mounted nozzles. The forward end of the rocket motor has a thrust neutralization plug and quick release pin. The thrust neutralization plug will blow out from the rocket motor if not secured with the quick release pin thus resulting in the rocket burning on the launch rail after ignition. The rocket motor burns at 1,450 psi and provides 3,000 lbs of thrust for 2.7 seconds. The button lug bands located on the rocket motor tube are used to attach the rocket motor to the launch rails of both systems. At the rear end of the rocket motor are the rocket motor electrical lead and the rocket bridle cable. The electrical lead connects to the linear demolition charge electrical receptacle on the MK 2 junction box and the system connector on the MK 1. The rocket

bridle cable connects to the linear demolition charge rocket harness connector. Tabulated Data: NEW .................................... 42 lbs per unit Propellant.............................................. N-5 Length............................................ 76.81 in Diameter .......................................... 5.20 in Igniter .............................................Electric Weight .............................................130 lbs Federal Supply Code: NSN .................................. 1340-01-118-2838 DODIC.....................................................J143 Unit of Issue: Each ....................................1 per wooden box Packing Data: Wooden Container: MK 757 MOD 0 Weight (w/contents) .....................238 lbs Dimensions…….88.63 in x 14 in x 20 in MK 697 MOD 0 Weight (w/Contents).....................270 lbs Dimensions…………..92.50 in x 14 in x 21.75 in

Shipping and Storage Data: Hazard Class/Division………………1.3C

UN Serial number…………………..0186 UN proper Shipping name:

ROCKET MOTOR Drawings: Assembly ............................ 525-174-0129 Packing: MK 757 MOD 0

Wooden box .......................6212986 Markings.................... 525-174-0180

MK 697 MOD 0 Wooden box .......................5167151 Markings.................... 525-174-0167

CONTAINER, DEMOLITION CHARGE, MK 8 MOD 1

Type Classification: Std Use: The Mark 8 Demolition Charge Container when loaded with plastic explosive and properly installed produces a straight linear cut. In priming, a blasting cap/detonator is secured in the detonator holder with the end pressed against the explosive filler. Additionally, the Mark 8 Demolition Charge Container is also used underwater to open cases of explosive filled ordnance such as mines and projectiles. Description: The Mark 8 Demolition Charge Container consists of a linear aluminum rectangular shaped body approximately 6 inches long, 2.25 inches wide and 2.75 inches high. The wedge shaped linear has an apex angle of 80 degrees. A detonator holder is provided to secure a detonator to the plastic explosive charge. Adjustable screw type legs are mounted at each corner to provide stabilization and leveling of the container on irregular surfaces. Tabulated Data: Weight------------------0.64 lbs Length---------------6.00 in. Width----------------2.25 in. Heigth---------------2.75 in.

Federal Supply Code: NSN-------------------------1375-01-187-1082 DODIC----------------------M487 Unit of Issue: Each Packed-------------------4 per M2A1 Metal box 2 M2A1 Metal Box (8 containers) per Wirebound Box Packing Data: Metal Box: Weight (w/Contents)-----8.61 lbs Dimensions----------------12.0 in. x 6.09 in. x 7.50 in. Wirebound Box--------------24.72 lbs Dimensions-------------------14.44 in x 12.53 in x 8.12 in Shipping and Storage Data: Hazard Class/Division And SCSG-----------------Inert DOT Class--------------------N/A DOT Marking----------------CONTAINER, DEMOLITION CHARGE Drawings: Assembly-----------------1350965 Packing (inner)-----------6120572 Packing (outer)-----------6120573

M58A4 LINEAR DEMOLITION CHARGE

Type Classification: Std Use: The MK 2 MOD 0 single shot mine clearance system is capable of clearing a path up to 15 yards wide and 109 yards long through a minefield. Effective against single-impulse, pressure-type, non-blast hardened antitank mines and mechanically actuated antipersonnel mines. The line charge creates an over-pressure which causes pressure-type fuzes to function. Mines that have not detonated will usually be uncovered or blown from the ground after detonation. Major components include: linear demolition charge, rocket motor, launcher and trailer. Description: Packed in a steel container that serves as both a storage and transportation container. At the rear of the container is the electrical receptacle junction box which facilitates the connection of the launcher safety switch, linear demolition charge electrical lead and the rocket motor connector. The fuze holder is located at the rear corner of the container. The fuze connector rear-half is located in the fuze holder and is attached to the arresting cable. The arresting cable (205 ft. of 3/4 nylon rope) lies under the explosive linear charge. The linear charge consists of three 100 ft sections and one 50 foot section (350 ft. of 3/4 nylon rope), with, 16 relay cups and 2-3 strands of detonation cord running along side, to

which 700 blocks of C-4 (1,400 pellets) are attached. The fuze and bungee strap kit are packed in the center, on top of the charge. The spare parts kit, consisting of male and female shorting plugs, and is used to perform system continuity checks before launch, is taped to the rear interior wall of the container. All charges containing 1996 lot dates and later have been modified to the preferred configuration. This configuration has approximately 95% reliability. Tabulated Data: Explosive C-4 Weight .................................................1,750 lbs Charge Length .......................................... 350 ft Relay Cups:

Weight ......................6 grains PETN each Federal Supply Code: NSN ................ 1375-01-326-9642

Arming wire weave, M1134A4 fuze, Contains Taggant C-4

NSN ................ 1375-01-287-0719

Arming wire weave, M1134A3 fuze NSN ................ 1375-01-326-7215

Arming wire weave, M1134A1E1 fuze DODIC .........................................................M913 Unit of Issue: Each ............................................1 per metal pallet

Packing Data: Dimensions .............................83.25 in. x 53.75 in. x 24.00 in.

Metal Container: Weight (w/Contents) ........................... 2,850 lbs Shipping and Storage Data: Hazard Class/Division .................................. 1.1D UN Serial Number ........................................0048 UN Proper Shipping Name

CHARGE, DEMOLITION Drawings: Assembly .................................10001-2128451

CHARGE, DEMOLITION, EXPLOSIVE SHEET, FLEXIBLE

2 grams/sq in

Type Classification: Security Risk Code (2) CG-CL IX-B Use: This flexible explosive sheet is used in general demolition as a cutting or breaching charge. It permits pin point metal cutting with minimum explosive loading. Because sheet is completely waterproof without the addition of protective coverings, it can be used in underwater demolition operations. The sheet can be cut to provide the length of charge required for the job at hand. Description: Sheet is olive-drab in color and is supplied in a roll 10 inches wide, 38 feet long, thickness is 0.083 inches and weighing 20 lbs. The explosive contained in this charge is 2 grams per square inch of PETN. Sheet is odorless and can be made to conform to practically any shape. It retains flexibility between temperatures of -60 degrees F and 160 degrees F and is not affected by repeated flexing. Sheet has been stored at ambient temperatures for over four years with no change in performance or flexibility. Tabulated Data: NEW…………………...0.526316 lbs per foot Length………………..12 inches/38 ft per roll

Width ............................................................. 10 in Thickness .............................................. 0.083 in Weight…….0.526316 per foot, 20.0 lbs per roll Federal Supply Code: NSN ................ 1375-01-036-0443 DODIC ........... …………….M980 Unit of Issue: Feet…38 feet per 20 lb. Roll, 76 feet (2 rolls) per wooden box Packing Data: Fiberboard & wood container: Weight (w/Contents).......................59.525 lbs Cube...................................................1.927 ft3 Shipping and Storage Data: Hazard Class/Division ....................................1.1D UN Serial Number ..........................................0048 UN Proper Shipping Name

CHARGES, DEMOLITION Drawings: Assembly: .............................................2114203 Packing: ................................................3139754


3 grams/sq in

Type Classification: Security Risk Code (2) CG-CL IX-B Use: This flexible explosive sheet is used in general demolition as a cutting or breaching charge. It permits pin point metal cutting with minimum explosive loading. Because sheet is completely waterproof without the addition of protective coverings, it can be used in underwater demolition operations. The sheet can be cut to provide the length of charge required for the job at hand. Description: Sheet is olive-drab in color and is supplied in a roll 10 inches wide, 25 feet long, thickness is 0.125 inches and weighing 20 lbs. The explosive contained in this charge is 3 grams per square inch of PETN. Sheet is odorless and can be made to conform to practically any shape. It retains flexibility between temperatures of -60 degrees F and 160 degrees F and is not affected by repeated flexing. Sheet has been stored at ambient temperatures for over four years with no change in performance or flexibility. Tabulated Data: NEW………………………0.8 lbs lbs per foot Length………………...12 inches/25 ft per roll Width…………………………………….10 in Thickness…………………………….0.125 in Weight….0.8 lbs lbs per foot, 20.0 lbs per roll

Federal Supply Code: NSN ..........................................1375-01-036-0444 DODIC .........................................................M981 Unit of Issue: Feet…….25 Feet per roll, 2 rolls, 50 feet per wooden box Packing Data: Fiberboard & wood container: Weight (w/Contents).......................59.525 lbs Cube...................................................1.927 ft3 Shipping and Storage Data: Hazard Class/Division ....................................1.1D UN Serial Number ..........................................0048 UN Proper Shipping Name:



4 grams sq/in

Type Classification: Security Risk Code (2) CG-CL IX-B Use: This flexible explosive sheet is used in general demolition as a cutting or breaching charge. It permits pin point metal cutting with minimum explosive loading. Because it is completely waterproof without the addition of protective coverings, it can be used in underwater demolition operations. The sheet can be cut to provide the length of charge required for the job at hand. Description: Sheet is olive-drab in color and is supplied in a roll 10 inches wide, 19 feet long, thickness is 0.166 inches and weighing 20 lbs. The explosive contained in this charge is 4 grams per square inch of PETN. Sheet is odorless and can be made to conform to practically any shape. It retains flexibility between temperatures of -60 degrees F and 160 degrees F and is not affected by repeated flexing. Sheet has been stored at ambient temperatures for over four years with no change in performance or flexibility. Tabulated Data: NEW…………………1.052632 lbs per foot Length………………12 inches/19 ft per roll Width…………………………….……10 in Thickness…………………………..0.166 in Weight……………….1.052632 lbs per foot, 20 lbs. Per roll

Federal Supply Code: NSN ..........................................1375-01-036-0445 1375-01-444-1562 DODIC .........................................................M982 Unit of Issue: Feet ........................................ 19 feet per 20 lb roll For NSN 1375-01-036-0445, 19 feet (1 roll) per wood box For NSN 1375-01-444-1562, 38 feet (2 rolls) per box Packing Data: Fiberboard & wood container: Weight (w/Contents).......................59.525 lbs Cube...................................................1.927 ft3 Shipping and Storage Data: Hazard Class/Division ....................................1.1D UN Serial Number ..........................................0048 UN Proper Shipping Name


M59A1 LINEAR DEMOLITION CHARGE

Type Classification: Std Use: The MK 1 MOD 0 three shot mine clearance system is an AAV mounted, self contained system which operates on vehicle slave electrical power and is capable of clearing a path up to 15 yards wide and 109 yards long through a minefield. Effective against single-impulse, pressure-type, non-blast hardened antitank mines and mechanically actuated antipersonnel mines. The line charge creates an over-pressure which causes pressure-type fuzes to function. Mines that have not detonated will usually be uncovered or blown from the ground after detonation. Major components include: linear demolition charge, rocket motor, launcher, capstan, support rails and ramps. Description: Packed in a steel container that serves as both a storage and transportation container. The fuze holder is located at the rear corner of the container. The fuze connector rear-half is located in the fuze holder and is attached to the arresting cable. The arresting cable (205 ft. of 3/4 nylon rope) lies under the explosive linear charge. The linear charge consists of three 100 ft

sections and one 50 foot section (350 ft. of 3/4 nylon rope), with, 16 relay cups and 2-3 strands of detonation cord running along side, to which 700 blocks of C-4 (1,400 pellets) are attached. The fuze and bungee strap kit are packed in the center, on top of the charge. All charges containing 1996 lot dates and later have been modified to the preferred configuration. This configuration has approximately 95% reliability. Tabulated Data: Explosive C-4 Weight ....................................1,750 lbs per unit Charge Length .......................................... 350 ft Relay Cups:

Weight ................. 6 grains PETN per cup Federal Supply Code: NSN ................ 1375-01-291-5194

Arming wire weave, M1134A4 fuze, Contains Taggant C-4

NSN ................ 1375-01-316-7905 Arming wire weave, M1134A3 fuze NSN 1375-01-326-7214

Arming wire weave, M1134A1E1 fuze DODIC .......................................................ML25

Unit of Issue: Each.......................................... 1 per metal pallet Packing Data: Metal Container: Weight (w/Contents) ......................... 2,520 lbs Dimensions .......................43.75 in. x 35.17 in. x 55.25 in. Shipping and Storage Data: Hazard Class/Division .................................. 1.1D UN Serial Number ..........................................048 UN Proper Shipping Name

CHARGE, DEMOLITION Drawings: Assembly .................................53711-6120618


Std A MSR 05963001.

Use:

Nonelectric Blasting Cap M11 is used to deto-nate all standard military explosives or initiate shocktube blasting caps.

Description:

The M11 is a small aluminum tube filled withexplosives (detonator) factory-crimped to a 30-footlength of shock tube. Shock tube is a thin plastic tubewith a thin layer of special explosive material depos-ited on its interior surface. A special plastic connec-tor (called a "J" hook) is attached to the sealed end ofthe shock tube which is sealed with a small cover.The "J" hook facilitates quick and easy attachmentonto a detonating cord (e.g., a ring main). Since theM11 is commercially used in boreholes, two brightlycolored plastic flags are attached to the shock tubenear the detonator end. A red flag is attached 1 meterfrom the detonator and a yellow flag is attached 2meters from the detonator as a safety precaution.These flags indicate that caps are nearby.

Functioning:

The M11 functions by transmitting an initiatingshock (or small detonation) through its shock tubeinto its detonator. The shock wave coming throughthe shock tube initiates a small amount of a fairly sen-sitive explosive in the aluminum tube detonator. Thisexplosive then initiates a larger amount of a less sen-sitive, more powerful explosive which actuates theexternal charge or device to which the cap is attached.The shock tube itself must be initiated by an M81igniter or a blasting cap.

.

NOTE

The explosion of the shock tube istotally contained within the plastictubing, but the explosion of the det-onator is just like any other militarystrength blasting cap.

Tabulated Data:

Aluminum Tube:Length...................................... 2.35 in.Diameter .................................. 0.241 in.

CAP, BLASTING: NONELECTRIC, 30 FOOT SHOCK TUBE, M11

Shock Tube:Material....................................Various plasticsLength......................................30 ftDiameter. .................................0.118 in.

Filler:Aluminum tube ........................ lead azide, molyben-

dum chromate, RDX or PETN

Shock tube ...............................HMX/AluminumMethod of actuation.................Shock from detona-

tion of a blasting cap or initiation of M81 igniter


DOD hazard class QD/DIV/SCG .........................................1.4 S

DOT hazard class: ........................1.4 SDOT label: ....................................EXPLOSIVE: 1.4 SDOT Container Marking:

Proper shipping name ..............Detonator assem-blies, nonelectric for blasting

UN serial number.....................0349, 0500NSN .........................................1375-01-415-1232

DODAC................................... 1375-ML47CAGE Code ............................ 19200

P/N ............................................ 112972627Net explosive weight (per cap) .... 1.33 g

(0.0029 lb)Specification ................................ QAA-1423Packaging..................................... 60 units/fiber-

board box/wood crate; 16 crates/pallet

Packing Box:Dimensions.............................. 20.5 in. x 13 in. x

25.75 in.Cube ........................................ 2.8 cu ft

Net explosive weight.................... 0.16 lbGross weight ................................ 57 lb

References:

FM 5-250TM 9-1375-213-12TM 9-1375-213-34&PDOD Consolidated Ammunition Supply Catalog

DEMOLITION FUZE ELECTRIC M1134A4

Type Classification: Security Risk Code: TBD Use: Utilize with the M58 and M59 Series Linear Demolition Charges. Description: The M1134A4Fuze is designed to detonate the M58 and M59 series Linear Demolition Charges. The fuze is connected between the fuze connector front half on the charge and the fuze connector rear half on the arresting cable. The fuze is placed in the fuze holder container after connections are made. The rocket motor is initiated and pulls the charge out of the container and fuze from the fuze holder. The extraction of the arming pin occurs when the forward motion of the charge and rocket motor is halted by the arresting cable. The tension on the arming wire, which is woven into the arresting cable, provides the force necessary to break the fuze shear pin and extract the arming pin. Extracting the arming pin enables the fuze rotor to rotate, opening two micro switches completing an electrical circuit to the fuze circuit board. When the charge has been deployed, the fuze is command initiated. Using a blast machine or other DC current power supply, an electrical charge is

applied to the selector switch/assembly control box, which will continue through the arresting cable to the fuze connector. The electrical charge will enter the fuze passing through the open micron switches, into the circuit board timer. The circuit board timer will send controlled electrical pulse to the bellows, which will initiate and rotate the rotor, aligning the firing leads with the detonators. The circuit board timer electrical pulses will then initiate the firing leads, which will initiate the fuze detonators which will blow through the base of the fuze, initiating relay cups crimped to detonating cord which will initiate the C-4 blocks on the Linear Demolition Charge. Note: There is a 5.5 second delay between the time the electrical charge is applied and the detonation of the charge. Tabulated Data: NEW......................... 1,945 mg Detonators (2):

Semi-Conductor Bridge 70 mg ZPPV each 70 mg LA each 140 mg PETN each

Bellows:

70 mg ZPPV 15 mg SP

Firing Leads (2):

650 mg A-5 each

Item Unit Dimensions: Diameter .................3.485 inches Length.....................4.528 inches Weight ........................4.00 lbs Federal Supply Code: DODIC ............... …………..ML82 NSN ................... 1375-01-468-2763 NSN ................... 1375-01-481-4894 Unit of Issue: Each ...... Two per PA108 Metal Container for NSN 1375-01-468-2763 Each……Ten per Fiberboard Box for NSN 1375-01-481-4894 Packing Data: For NSN 1375-01-468-2763 Weight: Container (empty)........7.5 lbs Packing ........................0.5 lbs M1134A4 Fuze (2) ......8.0 lbs Cube..........................0.44 Cu Ft For NSN 1375-01-481-4894 Container (empty)……3.0 lbs. Packing………………0.5 lbs. M1134A4 Fuze (2)…..8.0 lbs. Cube………………….0.9528 Cu. Ft. Shipping and Storege Data: Hazard Class/Division: For NSN 1375-01-468-2763…1.4 S For NSN 1375-01-481-4894…1.2 B UN Serial Number: For NSN 1375 01-468-2763…0367 For NSN 1375-01-481-4894…0107 UN Proper Shipping Name:

Fuzes, Detonating Drawings: Assembly ............. 53711-7095635 Packing: For NSN 1375-01-468-2763..53711-7096000 For NSN 1375-01-481-4894..53711-7379683

CHARGE, FLEXIBLE, MK 140 Mod 0

20 grams per unit

Type Classification: Security Risk Code (2) CG-CL 1X-B Use: This flexible charge is intended to, be used as an individual charge or as a booster for other demolition charges. This charge can be used in all demolition applications when such an explosive is required. This charge or segments of it can be attached, as required to build a larger charge. This charge can be attached to another demolition charge and used as a booster. This charge is especially effective as a booster with the Low Hazard Flexible Shape Charges and Explosive Data Sheet when primed with non electric detonators. Description: This charge is constructed from MIL-E46676 (PETN) plastic bonded explosives which can be cut shape and approximately 3.00 inches long and 0.65 into smaller segments. The charge is cylindrical inch in diameter. A 0.27 inch diameter center hole Through the charge facilitates priming with Blasting Caps, nonelectric detonators or detonating cord. Safety Precautions The following special Safety Precautions apply to the demolition Charge and shall be observed. (1) Although the explosive compositions in this charge are relatively insensitive to shock and fairly safe to handle, it is a high explosive that shall be

protected from high temperatures and from drops and jolts. (2) The explosives in the charge produce toxic gases when exploded. Do not inhale the fumes created by an explosive charge. (3) Cutting this charge with a tool, such as the common scissors, is not recommended. This charge can be cut into segments easily with a fixed or locked blade knife on a non sparking surface. Tabulated Data: NEW..................................................20 gram per unit Length ...................................................................3 in Diameter .............................................................0.650 Hole Diameter.................................................0.270 in Unit Weight ....................................................20 gram Federal Supply Code: NSN ............................................... 1375-01-281-8696 DODIC .............................................................MM30 Unit of Issue: Each .......................................... 240 per container Packing Data: Shipping Container .......................................... M2A1 Weight gross wt ................................................17.637 Cube..................................................0.317 cu ft (calc)

Shipping and Storage Data: Hazard Class/Division ......................................... 1.1D UN Serial number .......................................... UN0048 UN Proper Shipping Name ..................... CHARGES, DEMOLITION Drawings: Assembly: 53711-6545554 Packing: 192000-7553596

CHARGE, DEMOLITION, SHAPED, LINEAR, FLEXIBLE

30 grains/ft

Type Classification: Security Risk Code (2) CG-CL IX-B Use: The Flexible Charge is used by Explosive Ordnance Disposal personnel to remotely low order initiate (blow apart rather than detonate) or cut open explosive ordnance devices in order to render them safe to handle or transport. The Flexible Charge can be cut to provide the length of charge required for the job at hand. Description: The Flexible Charge is a long, thin lead-sheathed rod of explosive with a special cross-section shape (see illustration) that concentrates the explosives energy in a line to provide a cutting edge. The lead alloy sheath provides a great deal of flexibility so the charge can be bent around a round target item as small as two inches in diameter. The ends of the charge are capped with a soft rubbery elastomer flexible epoxy to provide a moisture seal until the charge sheath is cut to size for use. Cutting is done by scoring the sheath with a knife and breaking it along the score. The different charges all come in six foot lengths and differ in cross section dimensions and the amount of explosive load. They are designated by the amount of explosive per foot contained. After the proper charge is cut to the size specified in the appropriate Render Safe Procedure (RSP), it is primed with a military blasting cap and secured to (or adjacent to) the spot specified in the RSP. Initiation of the blasting cap detonated the Flexible Charges explosive load. The V-shaped notch in the metal sheath and the Flexible Charge itself concentrates a large proportion of the detonations energy into an intense Acutting edge@ detonation wave. This concentrated detonation wave allows application of a large amount of a large amount of energy to a small area of the target.

Tabulated Data: NEW..............................................0.0257 lbs Per unit Length..................................................................72 in Width ..............................................................0.220 in Height .............................................................0.190 in Weight ........................................................ 0.3266 lbs Federal Supply Code: NSN ............................................... 1375-01-318-8571 DODIC .............................................................MM41 Unit of Issue: Each ..................................................... 6 per container Packing Data: Wood, Natural color: Weight (w/contents)...................................... 16.33 lbs Cube....................................................0.48 cu ft (calc) Shipping and Storage Data: Hazard Class/Division ......................................... 1.1D UN Serial Number ......................................... UN0288 UN Proper Shipping Name CHARGES, DEMOLITION Drawings: Assembly: ....................................... 12255-7001621-2 Packing: .......................................... 53711-6665108-1


40 grains/ft

Type Classification: Security Risk Code (2) CG-CL IX-B Use: The Flexible Charge is used by Explosive Ordnance Disposal personnel to remotely low order initiate (blow apart rather than detonate) or cut open explosive ordnance devices in order to render them safe to handle or transport. The Flexible Charge can be cut to provide the length of charge required for the job at hand. Description: The Flexible Charge is a long, thin lead-sheathed rod of explosive with a special cross-section shape (see illustration) that concentrates the explosives energy in a line to provide a cutting edge. The lead alloy sheath provides a great deal of flexibility so the charge can be bent around a round target item as small as two inches in diameter. The ends of the charge are capped with a soft rubbery elastomer flexible epoxy to provide a moisture seal until the charge sheath is cut to size for use. Cutting is done by scoring the sheath with a knife and breaking it along the score. The different charges all come in six foot lengths and differ in cross section dimensions and the amount of explosive load. They are designated by the amount of explosive per foot contained. After the proper charge is cut to the size specified in the appropriate Render Safe Procedure (RSP), it is primed with a military blasting cap and secured to (or adjacent to) the spot specified in the RSP. Initiation of the blasting cap detonated the

Flexible Charges explosive load. The This concentrated detonation wave allows application of a large amount of energy to a small area of the target. Tabulated Data: NEW..............................................0.0342 lbs Per unit Length..................................................................72 in Width ..............................................................0.255 in Height .............................................................0.185 in Weight ........................................................ 0.4183 lbs Federal Supply Code: NSN ............................................... 1375-01-318-9821 DODIC .............................................................MM42 Unit of Issue: Each ..................................................... 6 per container Packing Data: Wood, Natural color: Weight (w/contents)..................................... 16.88 lbs. Cube....................................................0.48 cu ft (calc) Shipping and Storage Data: Hazard Class/Division ......................................... 1.1D UN Serial Number ......................................... UN0288 UN Proper Shipping Name CHARGES, DEMOLITION Drawings:

Charge itself concentrates a large proportion of the detonations energy into an intense Acutting edge@ V-shaped notch in the metal sheath and the Flexible detonation wave.

Assembly: ....................................... 12255-7001621-3 Packing: .......................................... 53711-6665108-2


60 grains/ft

Type Classification: Security Risk Code (2) CG-CL IX-B Use: The Flexible Charge is used by Explosive Ordnance Disposal personnel to remotely low order initiate (blow apart rather than detonate) or cut open explosive ordnance devices in order to render them safe to handle or transport. The Flexible Charge can be cut to provide the length of charge required for the job at hand. Description: The Flexible Charge is a long, thin lead-sheathed rod of explosive with a special cross-section shape (see illustration) that concentrates the explosives energy in a line to provide a cutting edge. The lead alloy sheath provides a great deal of flexibility so the charge can be bent around a round target item as small as two inches in diameter. The ends of the charge are capped with a soft rubbery elastomer flexible epoxy to provide a moisture seal until the charge sheath is cut to size for use. Cutting is done by scoring the sheath with a knife and breaking it along the score. The different charges all come in six foot lengths and differ in cross section dimensions and the amount of explosive load. They are designated by the amount of explosive per foot contained. After the proper charge is cut to the size specified in the appropriate Render Safe Procedure (RSP), it is primed with a military blasting cap and secured to (or adjacent to) the spot specified in the RSP. Initiation of the blasting cap detonated the Flexible Charges explosive load. The V-shaped notch in the metal sheath and the Flexible Charge itself concentrates a large proportion of the detonations energy into an intense Acutting edge@ detonation wave. This concentrated detonation wave

allows application of a large amount of energy to a small area of the target. Tabulated Data: NEW............................................0.05142 lbs Per unit Length..................................................................72 in Width ..............................................................0.300 in Height .............................................................0.240 in Weight ........................................................ 0.5633 lbs Federal Supply Code: NSN ............................................... 1375-01-319-0940 DODIC .............................................................MM43 Unit of Issue: Each ..................................................... 6 per container Packing Data: Wood, Natural color: Weight (w/contents)..................................... 17.75 lbs. Cube....................................................0.48 cu ft (calc) Shipping and Storage Data: Hazard Class/Division ......................................... 1.1D UN Serial Number ......................................... UN0288 UN Proper Shipping Name CHARGES, DEMOLITION Drawings: Assembly: ....................................... 12255-7001621-4 Packing:……………………………53711-6665108-3


75 grains/ft

Type Classification: Security Risk Code (2) CG-CL IX-B Use: The Flexible Charge is used by Explosive Ordnance Disposal personnel to remotely low order initiate (blow apart rather than detonate) or cut open explosive ordnance devices in order to render them safe to handle or transport. The Flexible Charge can be cut to provide the length of charge required for the job at hand. Description: The Flexible Charge is a long, thin lead-sheathed rod of explosive with a special cross-section shape (see illustration) that concentrates the explosives energy in a line to provide a cutting edge. The lead alloy sheath provides a great deal of flexibility so the charge can be bent around a round target item as small as two inches in diameter. The ends of the charge are capped with a soft rubbery elastomer flexible epoxy to provide a moisture seal until the charge sheath is cut to size for use. Cutting is done by scoring the sheath with a knife and breaking it along the score. The different charges all come in six foot lengths and differ in cross section dimensions and the amount of explosive load. They are designated by the amount of explosive per foot contained. After the proper charge is cut to the size specified in the appropriate Render Safe Procedure (RSP), it is primed with a military blasting cap and secured to (or adjacent to) the spot specified in the RSP.

Initiation of the blasting cap detonated the Flexible Charges explosive load. The V-shaped notch in the metal sheath and the Flexible Charge itself concentrates a large proportion of the detonations energy into an intense Acutting edge@ detonation wave. This concentrated detonation wave allows application of a large amount of a large amount of energy to a small area of the target. Tabulated Data: NEW ...................................... 0.0642 lbs Per unit Length.......................................................... 72 in Width ...................................................... 0.350 in Height ..................................................... 0.260 in Weight ..................................................0.8016lbs Federal Supply Code: NSN ....................................... 1375-01-318-9822 DODIC...................................................... MM44 Unit of Issue: Each ............................................. 6 per container Packing Data: Wood, Natural color: Weight (w/contents) .............................19.18 lbs. Cube............................................0.48 cu ft (calc)


Hazard Class/Division…………………1.1D UN Serial Number……………..….UN0288 UN Proper Shipping Name CHARGES, DEMOLITION Drawings: Assembly: ............................... 12255-7001621-5 Packing: .................................. 53711-6665108-4


125 grains/ft

Type Classification: Security Risk Code (2) CG-CL IX-B Use: The Flexible Charge is used by Explosive Ordnance Disposal personnel to remotely low order initiate (blow apart rather than detonate) or cut open explosive ordnance devices in order to render them safe to handle or transport. The Flexible Charge can be cut to provide the length of charge required for the job at hand. Description: The Flexible Charge is a long, thin lead-sheathed rod of explosive with a special cross-section shape (see illustration) that concentrates the explosive=s energy in a line to provide a cutting edge. The lead alloy sheath provides a great deal of flexibility so the charge can be bent around a round target item as small as two inches in diameter. The ends of the charge are capped with a soft rubbery elastomer flexible epoxy to provide a moisture seal until the charge sheath is cut to size for use. Cutting is done by scoring the sheath with a knife and breaking it along the score. The different charges all come in six foot lengths and differ in cross section dimensions and the amount of explosive load. They are designated by the amount of explosive per foot contained. After the proper charge is cut to the size specified in the appropriate Render Safe Procedure (RSP), it is primed with a military blasting cap and secured to (or adjacent to) the spot specified in the RSP. Initiation of the blasting cap detonated the Flexible Charges explosive load. The V-shaped notch in the metal sheath and the Flexible Charge itself concentrates a large proportion of the

detonations energy into an intense Acutting edge@ detonation wave. This concentrated detonation wave allows application of a large amount of a large amount of energy to a small area of the target. Tabulated Data: NEW..............................................0.1071 lbs Per unit Length..................................................................72 in Width ..............................................................0.410 in Height .............................................................0.280 in Weight ........................................................ 0.9316 lbs Federal Supply Code: NSN ............................................... 1375-01-319-0941 DODIC .............................................................MM45 Unit of Issue: Each. .................................................... 6 per container Packing Data: Wood, Natural color: Weight (w/contents)..................................... 19.96 lbs. Cube....................................................0.48 cu ft (calc) Shipping and Storage Data: Hazard Class/Division ......................................... 1.1D UN Serial Number ......................................... UN0288 UN Proper Shipping Name ........................................CHARGES, DEMOLITION Drawings: Assembly: ....................................... 12255-7001622-1 Packing: .......................................... 53711-6665108-5


225 grains/ft


detonations energy into an intense Acutting edge@ detonation wave. This concentrated detonation wave allows application of a large amount of a large amount of energy to a small area of the target. Tabulated Data: NEW.............................................. 0.1928 lbs per unit Length..................................................................72 in Width ..............................................................0.450 in Height .............................................................0.480 in Weight .......................................................... 2.503 lbs Federal Supply Code: NSN ............................................... 1375-01-318-0754 DODIC .............................................................MM46 Unit of Issue: Each.. ................................................... 6 per container Packing Data: Wood, Natural color: Weight (w/contents)..................................... 21.88 lbs. Cube....................................................0.48 cu ft (calc) Shipping and Storage Data: Hazard Class/Division ......................................... 1.1D UN Serial Number ......................................... UN0288 UN Proper Shipping Name .......................................... .......................................CHARGES, DEMOLITION Drawings: Assembly: ....................................... 12255-7001622-2 Packing: .......................................... 53711-6665108-6


400 grains/ft


detonations energy into an intense Acutting edge@ detonation wave. This concentrated detonation wave allows application of a large amount of a large amount of energy to a small area of the target. Tabulated Data: NEW............................................0.34285 lbs Per unit Length..................................................................72 in Width ..............................................................0.600 in Height .............................................................0.540 in Weight ............................................................ 2.89 lbs Federal Supply Code: NSN ............................................... 1375-01-318-0753 DODIC .............................................................MM47 Unit of Issue: Each. .................................................... 3 per container Packing Data: Wood, Natural color: Weight (w/contents)..................................... 23.04 lbs. Cube....................................................0.48 cu ft (calc) Shipping and Storage Data: Hazard Class/Division ......................................... 1.1D UN Serial Number ......................................... UN0288 UN Proper Shipping Name

CHARGES, DEMOLITION Drawings: Assembly: ....................................... 12255-7001622-4 Packing: .......................................... 53711-6665108-7


600 grains/ft

Type Classification: Security Risk Code (2) CG-CL IX-B Use: The Flexible Charge is used by Explosive Ordnance Disposal personnel to remotely low order initiate (blow apart rather than detonate) or cut open explosive ordnance devices in order to render them safe to handle or transport. The Flexible Charge can be cut to provide the length of charge required for the job at hand. Description: The Flexible Charge is a long, thin lead-sheathed rod of explosive with a special cross-section shape (see illustration) that concentrates the explosives energy in a line to provide a cutting edge. The lead alloy sheath provides a great deal of flexibility so the charge can be bent around a round target item as small as two inches in diameter. The ends of the charge are capped with a soft rubbery elastomer flexible epoxy to provide a moisture seal until the charge sheath is cut to size for use. Cutting is done by scoring the sheath with a knife and breaking it along the score. The different charges all come in six foot lengths and differ in cross section dimensions and the amount of explosive load. They are designated by the amount of explosive per foot contained. After the proper charge is cut to the size specified in the appropriate Render Safe Procedure (RSP), it is primed with a military blasting cap and secured to (or adjacent to) the spot specified in the RSP. Initiation of the blasting cap detonated the Flexible Charges explosive load.

The V-shaped notch in the metal sheath and the Flexible Charge itself concentrates a large proportion of the detonations energy into an intense Acutting edge @ detonation wave. This concentrated detonation wave allows application of a large amount of a large amount of energy to a small area of the target. Tabulated Data: NEW..............................................0.5142 lbs Per unit Length..................................................................72 in Width ..............................................................0.670 in Height .............................................................0.665 in Weight .......................................................... 3.863 lbs Federal Supply Code: NSN ............................................... 1375-01-319-9184 DODIC .............................................................MM48 Unit of Issue: Each.. ................................................... 3 per container Packing Data: Wood, Natural color: Weight (w/contents)...................................... 25.96 lbs Cube....................................................0.48 cu ft (calc)

Shipping and Storage Data: Hazard Class/Division ......................................... 1.1D UN Serial Number ......................................... UN0288 UN Proper Shipping Name

CHARGES, DEMOLITION Drawings: Assembly: ....................................... 12255-7001622-6 Packing: .......................................... 53711-6665108-8

CHARGE, SHAPED, LINEAR, FLEXIBLE, LOW HAZARD, MK 143

600 grains/ft

Type Classification: Security Risk Code (2) CG-CL IX-B Use: This family of �Flex linear� shaped charges (FLSCs) is used by Explosive Ordnance Disposal (EOD) personnel to remotely low order initiate (blow apart rather than detonate) or cut open explosive ordnance devices in order to render them safe to handle or transport. The FLSC can be cut to provide the length of charge required for the job at hand. Description: The Low Hazard Flexible Linear Shaped Charge (Explosive Cutting Tape ECT) is designed to produce a linear cutting action in various applications where remote, fast, and reliable cutting of obstacles and other targets is required. When initiated, the charge produces on shrapnel or lead contaminants, unlike conventional lead sheathed flexible linear shape charges. Cutting is done by using a fixed or locked blade knife only on a non-sparking surface. Different charges all come in twenty foot lengths and differ in cross-section dimensions and the amount of explosive load. They are designated by the amount of explosive per foot contained.

Tabulated Data: NEW.....................................1.710 lbs per unit Length......................................................... 20 ft Width ...................................................... 0.91 in Height ..................................................... 0.62 in Weight ...................................................2.40 lbs Federal Supply Code: NSN ..........................................1375-01-328-5796 DODIC ....................................................... MM51 Unit of Issue: Each ............................................ 8 per metal drum Packing Data: Metal drum: ............................................MS27683 Weight (w/Contents) 54.10 lbs Cube....................................................4.98 ft3 Shipping and Storage Data: Hazard Class/Division ....................................1.2D UN Serial number ...........................................0443 UN Proper Shipping Name CHARGE, SHAPED LINEAR FLEXIBLE, LOW HAZARD Drawings: Assembly ..............................................6736479 Packing .................................................6736483


1,200 grains/ft


Tabulated Data: NEW.......................................3.43 lbs per unit Length......................................................... 20 ft Width ...................................................... 1.25 in Height ..................................................... 1.30 in Weight ...................................................4.96 lbs Federal Supply Code: NSN ..........................................1375-01-328-5797 DODIC ....................................................... MM52 Unit of Issue: Each ........................................... 4 per metal drum Packing Data: Metal drum: ............................................MS27683 Weight (w/Contents).......................52.911 lbs Cube....................................................4.98 ft3 Shipping and Storage Data: Hazard Class/Division ....................................1.2D UNO serial number.........................................0443 UNO proper Shipping name ......................CHARGE, SHAPED LINEAR FLEXIBLE, LOW HAZARD Drawings: Assembly ..............................................6736480 Packing .................................................6736483


2,400 grains/ft


Tabulated Data: NEW.......................................6.86 lbs per unit Length......................................................... 20 ft Width ...................................................... 2.70 in Height ..................................................... 2.25 in Weight .................................................24.98 lbs Federal Supply Code: NSN ..........................................1375-01-328-8048 DODIC ....................................................... MM53 Unit of Issue: Each ........................................... 2 per metal drum Packing Data: Metal drum: ............................................MS27683 Weight (w/Contents).......................52.911 lbs Cube..................................................3.796 ft3 Shipping and Storage Data: Hazard Class/Division ....................................1.2D UN Serial Number ..........................................0443 UN Proper Shipping Name CHARGE, SHAPED LINEAR FLEXIBLE, LOW HAZARD Drawings: Assembly ..............................................6736481 Packing .................................................6736487


5,400 grains/ft

Type Classification: Security Risk Code (2) CG-CL IX-B Use: This family of Flex linear shaped charges (FLSCs) is used by Explosive Ordnance Disposal (EOD) personnel to remotely low order initiate (blow apart rather than detonate) or cut open explosive ordnance devices in order to render them safe to handle or transport. The FLSC can be cut to provide the length of charge required for the job at hand. Description: The Low Hazard Flexible Linear Shaped Charge (Explosive Cutting Tape ECT) is designed to produce a linear cutting action in various applications where remote, fast, and reliable cutting of obstacles and other targets is required. When initiated, the charge produces on shrapnel or lead contaminants, unlike conventional lead sheathed flexible linear shape charges. Cutting is done by using a fixed or locked blade knife only on a non-sparking surface. Different charges all come in twenty foot lengths and differ in cross-section

dimensions and the amount of explosive load. They are designated by the amount of explosive per foot contained.

Tabulated Data: NEW ..............................15.43 lbs per unit Length..................................................20 ft Width ............................................... 2.70 in Height .............................................. 2.25 in Weight ..........................................24.98 lbs Federal Supply Code: NSN .................................. 1375-01-328-8049 DODIC................................................. MM54 Unit of Issue: Each ..................................... 1 per metal drum Packing Data: Metal drum: Weight (w/Contents)..................54.10 lbs Cube.............................................4.92 ft3 Shipping and Storage Data: Hazard Class/Division ............................ 1.2D UN Serial Number .................................. 0443

Shipping and Storage Data: UN Proper Shipping Name: CHARGE, SHAPED LINEAR FLEXIBLE, LOW HAZARD Drawings: Assembly ...................................... 6736482 Packing ......................................... 6736483

DETONATOR, NON-ELECTRIC, MK 123 MOD 0

Type Classification: Security Risk Code (3) CG-CL IX-B Use: The MK 123 Nonelectric Detonator with pyrotechnic leads (Shock Tubes -ST) are used as initiating agents. The nonelectric detonator is used in place of the M7 Nonelectric Blasting Cap in a variety of blasting applications: such as EOD, SEALS weapons systems, and general purpose demolitions in which a lightweight, low explosive weight, nonfragmenting (pyrotechnic lead only) and waterproof system is desired. Nonelectric detonators are operable to a depth of 200 feet in sea water. The unit is a dual version that provides for redundant and/or multiple set ups required for the job at hand. Description: The MK 123 Nonelectric Detonator Fig 1 consist of a double strand nonfragmenting, co-extruded plastic polyethylene-surlyn pyrotechnic lead (shock tube) containing less than 0.1 grains per foot of HMX explosive with a factory crimped and sealed M7 equivalent detonator at one end. The other end (bitter or initiating end) is also sealed. The nonelectric

detonator has the equivalent blasting cap output of 13.5 grains of RDX explosive. The detonator is approximately 2.34 inches long and 0.24 inch in diameter. The pyrotechnic lead is approximately 0.150 inch in diameter and fully contains the shock tube reaction. When initiated the pyrotechnic lead propagates at approximately 6500 feet per second. Knots, bends kinks, and stretching will not affect propagation. The pyrotechnic lead contains such a small quantity of explosive material the athe outer surface of the pyrotechnic lead remains intact during and after functioning. The pyrothechnic leads are olive drab in color and the olive drab pigment is sufficient to conceal the fash during functioning. The dual extruded pyrotechnic leads are assembled together in a single plastic sheath with two M7 equivalent detonators sealed on the output end. One cap has a protective sleeve to prevent the caps from damaging each other during shipment. Functioning: The nonelectric detonator can be initiated by detonation or by shock from a primer or other igniter into the center core.

NOTE: The non-electric detonator pyrotechnic lead cannot be initated by radio frequency energy nor by electro-static spark, stray electrial energy, nor flame, nor friction, nor impact found in normal conditions. But can be initiated by BULLET IMPACT. NEW ....................................0.00335 lbs per unit Length (Shock Tube) ................................. 100 ft Length (Detonator)....................................2.34 in Diameter..................................................0.240 in Unit Weight............................................. 2.16 lbs Federal Supply Code: NSN .......................................1375-01-327-9205 DODIC......................................................MM56 Unit of Issue: Each .............................................8 per container Packing Data: Shipping Container ..........................CNU-405/E Weight gross wt .................................... 54.10 lbs Cube ......................................................4.92 cu ft Shipping and Storage Data: Hazard Class/Division .................................1.4 S UN Serial number .................................. UN0455 UN Proper Shipping Name DETONATORS, NON-ELECTRIC Drawings: Assembly: ............................... 53711-6570661-1 Packing: .....................................30003-986A106

CANINE SCENT KIT 1375-01-192-7411

8 1375-00-096-3095 M587 Dynamite, 40% Nitroglycerin 8 EA 7 MIL-F-45144 M670 Fuse, Blasting Time 5 FT, 6 EA 6 MIL-DTL-17124 M456 Detonating Cord PETN Filled 5 FT, 6 EA 5 MIL-T-248 - Charge Demolition Block TNT 3 Blocks 4 Empty Container - - - 3 MIL-C-50523 M023 Comp C-4 M112 Block 3 EA 2 1375-00-772-1370 MY57 Propellant, Smokeless Powder 2 EA 1 1375-01-180-5779 MY77 Explosive Water Gel 6 EA

Container Number

NSN DODIC Nomenclature Quanitity

CANINE SCENT KIT

1375-01-522-6564

12 N/A N/A LATEX GLOVES, POWDER FREE AND ANTI-STATIC

BAGS

11 8140-00-828-2938 N/A EMPTY M19A1 5.5 LBS 10 8140-00-828-2938 N/A EMPTY M19A1 5.5 LBS 9 1375-01-480-1343 ANFO AMMONIUM NITRATE FUEL

OIL 2 LBS

8 1375-00-096-3095 M587 DYNAMITE, 40% NITROGLYCERINE

6 PIECES

7 MIL-F-45144 M670 FUSE, BLASTING, TIME (BLACK POWDER)

2 PIECES

6 MIL-DTL-17124 M456 CORD DETONATING, PETN 6 PIECES 5 MIL-T-248 M030 CHARGE DEMOLITION,

BLOCK TNT 3 PIECES

4 MIL-C-50523 M023 CHARGE, DEMOLITION, BLOCKCOMPOSTITION C4

3 EA

3 N/A N/A SYMTEX 2 EA 2 1375-00-772-1370 MY57 SMOKLESS POWDER 2 PIECES 1 1375-01-180-5779 MY77 WATER GEL, EXPLOSIVE 6 PIECES

CONTAINER NUMBER

NSN/SPECIFICATION DODIC NOMENCLATURE SIZE & QTY

CANINE SCENT KIT 1375-01-542-1650

Type Classification: Std Use: The MN01 Canine Explosive Scent Kit is comprised of the most commonly used military and civilian explosives and is required in the training and certification of explosive scent dogs. Description: There are currently three kits cataloged for Marine Corps use. Canine Explosive Scent Kit contains TNT, Composition C-4, Dynamite with a 40% Nitroglycerin content, Dynamite with a 40% Ammonium Nitrate, Time Fuse, Detonating Cord, Explosive Water Gel (TOVEX) and Smokeless Powder. There is also one empty M19A1 Metal Can, except in NSN 1375-01-542-1650. All components are packed separately in M19A1 Metal Cans and are over packed in a Wood Shipping and Storage Container. The M670 Time Fuse and M456 Detonating Cord have been cut into 5 foot lengths. There are 6 5 foot lengths (30 feet each) in the appropriate M19A1 Metal Cans. Federal Supply Code: NSN.................1375-01-192-7411 Tabulated Data: A Wood Shipping and storage container consisting of: 8 M19A1 Metal cans 8140-00-828-2938 packaged as follows: Explosive Water Gel 1375-01-180-5779/MY77 6 EA; Propellant, Smokeless Powder 1375-00-772-1370/MY57 2 EA; Comp C-4 M112 Block MIL-C-50523 (M023) 3 EA; Charge Demolition Block TNT MIL-T-248 3 blocks; Detonating Cord, PETN Filled MIL-DTL-17124 ((M456) 5 FT Lengths, 6 EA; Fuse, Blasting Time MIL-F-45144 (M670) 5 FT Lengths, 6 EA; Dynamite, 40% Nitroglycerin 1375-00-096-3095/M587 8 EA; One Can containing Nitrile Latex Gloves,

Powder Free and Anti-Static Bags. Two Empty Cans Federal Supply Code: NSN ................ 1375-01-522-6564 Tabulated Data: A Wood Shipping and storage container consisting of: 12 M19A1 Metal cans 8140-00-828-2938 packaged as follows: Explosive Water Gel 1375-01-180-5779/MY77 6 EA; Propellant, Smokeless Powder 1375-00-772-1370/MY57 2 EA; Symtex A, 3 ½ lb. Blocks; 1375-01-480-1331 (Status 9, Pending ESD) Comp C-4 M112 Block MIL-C-50523 (M023) 3 EA; Charge Demolition Block TNT MIL-T-248 3 blocks; Detonating Cord, PETN Filled MIL-DTL-17124 ((M456) 5 FT Lengths, 6 EA; Fuse, Blasting Time MIL-F-45144 (M670) 5 FT Lengths, 6 EA; Dynamite, 40% Nitroglycerin 1375-00-096-3095/M587 8 EA; Ammonium Nitrate Fuel Oil (ANFO) 2 lbs.; 1375-01-480-1343 (Status 9, Pending ESD) One Can containing Nitrile Latex Gloves, Powder Free and Anti-Static Bags. Federal Supply Code: NSN ................ 1375-01-542-1650 Tabulated Data: A Wood Shipping and storage container consisting of: 8 M19A1 Metal cans 8140-00-828-2938 packaged with velostat bags and scent material packaged as follows: Explosive Water Gel 1375-01-180-5779/MY77 6 EA; Propellant, Smokeless Powder 1375-00-772-1370/MY57 2 EA; Fuse, Blasting Time MIL-F-45144 (M670) 5 FT Lengths, 6 EA; Comp C-4 M112 Block MIL-C-50523 (M023) 3 EA; Charge Demolition Block TNT MIL-T-248 3 Blocks;

Detonating Cord, PETN Filled MIL-DTL-17124 (M456) 5 FT Lengths, 6 EA; Dynamite, 40% Ammonium Nitrate 1375-00-096-3098/M585 6 EA; Dynamite, 40% Nitroglycerin 1375-00-096-3095/M587 6 EA. Packing Data: For NSN 1375-01-192-7411 Dimensions ..................................35 in. x 12.75 in. x 10.50 in. Wood Container: Weight (w/Contents) ................................ 80 lbs For NSN 1375-01-522-6564 Dimensions ..................................51 in. x 12.75 in. x 10.50 in. Wood Container: Weight (w/Contents) ........................... 102.8 lbs For NSN 1375-01-542-1650 Dimensions ..................................35 in. x 12.75 in. x 10.50 in. Wood Container:

Weight (w/ Contents)………………...…73 lbs Drawings: For NSN 1375-01-192-7411 Assembly .................................... 98747-84241 For NSN 1375-01-522-6564 Assembly .................................53711-7624815 Unit of Issue: Each Shipping and Storage Data: Hazard Class/Division ..................................1.1D UNO serial number.......................................0048 UNO proper Shipping Name………CHARGES, DEMOLITION PG II

For NSN 1375-01-542-1650 Assembly .................................53711-8215682


Std A MSR 05963001.

Use:

Nonelectric Blasting Cap M12 is used to relay ashock tube detonation impulse from an M81 initiator(or another relay cap) to another relay cap or to a highstrength shock tube blasting cap (e.g., the M11)which initiates standard military explosives. TheM12 is used only as a relay device. It does not havesufficient output to initiate most military explosives.

Description:

The M12 is a small aluminum tube filled withexplosives (detonator) factory-crimped to a 500-footlength of shock tube. Shock tube is a thin plastic tubewith a thin layer of special explosive material depos-ited on its interior surface. Splicing material is sup-plied with the spool to make at least five splices. Aspecial plastic clamp is attached to the detonator tofacilitate quick and easy attachment to the shock tubeof up to five other blasting cap components.

Functioning:

The M12 functions in transmitting an initiatingshock (or small detonation) through its shock tube

into its detonator. The shock wave coming throughthe shock tube initiates a small amount of sensitiveexplosive in the detonator. This explosive then ini-tiates a small amount of a less sensitive, more power-ful explosive which actuates up to five shock tubesheld by the plastic connector. The M12’s shock tubemust be initiated by a blasting cap or by a specialTime Blasting Fuse Igniter, the M81.

NOTE

The older model igniter, the M60will NOT secure or reliably initiateshock tube.

Tabulated Data:

Aluminum Tube Detonator:Length ..................................... 2.7 in.Diameter.................................. .0.296 in.

Shock Tube:Material ................................... Various plasticsLength ..................................... 500 ftDiameter.................................. 0.118 in.

Filler:Detonator................................. Lead azide, PETNShock tube............................... HMX/AluminumMethod of actuation ................ Shock from deto-

nation of blasting cap or the primer in an M81 Igniter



DOD hazard class (QD/DIV/SC ............................................1.4S

DOT hazard class: ........................1.4SDOT label: .................................... EXPLOSIVE: 1.4SDOT Container Marking:

Proper shipping name ..............Detonators, assem-blies, nonelectric

UN serial no.............................0349, 0500NSN .........................................1375-01-415-1230DODAC ...................................1375-MN02

CAGE Code..................................19200Net explosive weight (per cap) .....2.71 g

(0.00596 lb)Drawing ........................................12972628Specification .................................QAA-1459

Packaging..................................... 8 fiberboard box; 6 box (48)/wooden crate; 2 wood crates/pallet

Packing Box:Dimensions.............................. 40 in. x 20 in.

x 37 in.Cube ........................................ 17.13 cu ft

Net explosive weight.................... 0.286 lbGross weight ................................ 1.1 lb

References:



Std A MSR 05963001.

Use:

Nonelectric Blasting Cap M13 is used to relay ashock tube detonation impulse from an M81 initiator(or another relay cap) to another relay cap or to a highstrength shock tube blasting cap (e.g., the M11)which initiates standard military explosives. TheM13 is used only as a relay device. It does not havesufficient output to initiate most military explosives.

Description:

The M13 is a small aluminum tube filled withexplosives (detonator) factory-crimped to a 1000-footlength of shock tube. Shock tube is a thin plastic tubewith a thin layer of special explosive material depos-ited on its interior surface. Splicing material is sup-plied with the spool to make at least five splices. Aspecial plastic clamp is attached to the detonator tofacilitate quick and easy attachment to the shock tubeof up to five other blasting caps.

Functioning:

The M13 functions in transmitting an initiatingshock (or small detonation) through its shock tube

into its detonator. The shock wave coming throughthe shock tube initiates a small amount of sensitiveexplosive in the detonator. This explosive, in turn,initiates a small amount of a less sensitive, more pow-erful explosive which actuates up to five shock tubesheld by the plastic connector. The M13’s shock tubemust itself be initiated by a blasting cap or by a spe-cial Time Blasting Fuse Igniter, the M81.

NOTE

The M60. the older model igniter,will NOT secure or reliably initiateshock tube.

Tabulated Data:

Aluminum Tube Detonator:Length ..................................... 2.7 in.Diameter.................................. 0.296 in.

Shock Tube:Material ................................... Various plasticsLength ..................................... 1000 ftDiameter.................................. 0.118 in.

Filler:Detonator................................. Lead azide, PETNShock tube............................... HMX/Aluminum


Method of actuation.................Shock from deto-nation of blasting cap or the primer in an M81 Igniter


DOD Hazard class QD/DIV/SCG .........................................1.4S

DOT Hazard class:........................1.4SDOT Label: ...................................EXPLOSIVE:

1.4SDOT Container Marking:

Proper Shipping Name.............Detonators, assem-blies, nonelectric

UN serial no.............................0455, 0500NSN .........................................1375-01-415-1231DODAC ...................................1375-MN03Net explosive weight (per

cap ....................................... 5.06g

Drawing........................................ 12972629Specification ................................ QAA-1459Packaging..................................... 4 units/fiberboard

box; 6 fiberboard boxes/wood crate; 2 wood crates/pal-let

Packing Box:Dimensions.............................. 40 in. x 20 in.

x 37 in.Cube ............................................ 17.13 cu ftNet explosive weight.................... 0.245lb/crateGross weight ................................ 198.64 kg

palletizedReference:



Std A MSR 05963001.

Use:

The M81 Igniter is used to ignite time blastingfuse or to initiate the shock tube of the new shocktube nonelectric blasting caps.

Description:

The M81 is a small plastic tube with a pull ringon a thin rod projecting from one end, a safety (cot-ter) pin that goes laterally through the tube and ascrew cap that secures a holding mechanism for thefuse or shock tube on the other end. A two-pieceplastic plug comes secured into the hole in the screwend cap that will be used to accommodate the shocktube or time blasting fuse. The two-piece design ofthe shipping plug allows proper securing of shocktube (with just inner piece removed) or time blastingfuse (with both pieces removed). To further differen-tiate the M81 from the almost identical M60 Igniter,the plug and the screw end cap are colored black onthe M81 while the similar parts are olive drab on theM60. The bodies and upper screw caps of both ignit-ers are olive drab and the nomenclature on both itemsis stenciled in yellow.

NOTE

Shock tube is a thin plastic tubewith a thin layer of special explo-sive material deposited on its inte-rior surface.

Functioning:

The M81 is manually actuated by the operator.The sequence is as follows: The operator loosens thescrew cap and removes just the inner piece of theshipping if shock tube is to be used. If time blastingfuse is to be used, both pieces of the shipping plug areremoved. The freshly cut off end of the shock tube ortime blasting fuse is inserted in the hole from whichthe plug was removed. The screw cap is tightened tosecure the fuse or shock tube; the safety (cotter) pin isremoved; the operator pulls the pull ring; the rod onthe pull ring pulls the firing pin against the force of aspring. When the limit of travel is reached, the pullring rod releases the firing pin which is forced by thespring into the M42 primer which fires with a flameand an explosive shock which ignites the fuse or ini-tiates the shock tube.

IGNITER, TIME BLASTING FUSE: M81, W/SHOCK TUBE CAPABILIT

NOTE

The standard M60 Igniter (whichhas an almost identical appearanceto the M81) will NOT secure or reli-ably initiate shock tube.

Tabulated Data:

Length...........................................4.0 in.Diameter: Pull ring ...................................1.2 in.

Body.........................................0.75 in.Filler:

M42 primer ..............................Primer mixNet explosive weight (per

igniter) .....................................0.0001 lb (0.05 gr)Method of actuation......................Impact of spring-

loaded firing pin on primer effected by operator pull-ing pull ring


DOD Hazard class QD/DIV/SCG .........................................1.4S

DOT Hazard class.........................1.4SDot Label: .................................... EXPLOSIVE:

1.4S

DOT Container Marking:Proper shipping name.............. Lighters, fuseUN serial no. ........................... 0131, 0500NSN......................................... 1375-01-415-1235DODAC................................... 1375-MN08CAGE Code ............................ 19200

Drawing........................................ 12977193Specification ................................ QAA-1442Packaging..................................... 5 igniters /paper-

board box, one box to barrier bag, 60 bags (300 ignit-ers)/wooden box

Packing box:Dimensions.............................. 21.5 in. x 12 in. x

14.5 in.Cube ........................................ 2.16 cu ftNet explosive weight............... 0.03 lbGross Weight (w/contents)...... 65lb

References:


55435064 usmc technical data sheet for less than lethal munitions demolition associated items usa...

Documents

grains charge

demolition flexible

demolition linear

grams charge

grains length

grains detonator

grains performance

practice mk