6-airhandling units
TRANSCRIPT
-
7/23/2019 6-AirHandling Units
1/37
-
7/23/2019 6-AirHandling Units
2/37
-
7/23/2019 6-AirHandling Units
3/37
-
7/23/2019 6-AirHandling Units
4/37
-
7/23/2019 6-AirHandling Units
5/37
-
7/23/2019 6-AirHandling Units
6/37
-
7/23/2019 6-AirHandling Units
7/37
-
7/23/2019 6-AirHandling Units
8/37
-
7/23/2019 6-AirHandling Units
9/37
-
7/23/2019 6-AirHandling Units
10/37
-
7/23/2019 6-AirHandling Units
11/37
-
7/23/2019 6-AirHandling Units
12/37
-
7/23/2019 6-AirHandling Units
13/37
-
7/23/2019 6-AirHandling Units
14/37
-
7/23/2019 6-AirHandling Units
15/37
-
7/23/2019 6-AirHandling Units
16/37
-
7/23/2019 6-AirHandling Units
17/37
-
7/23/2019 6-AirHandling Units
18/37
-
7/23/2019 6-AirHandling Units
19/37
-
7/23/2019 6-AirHandling Units
20/37
-
7/23/2019 6-AirHandling Units
21/37
-
7/23/2019 6-AirHandling Units
22/37
-
7/23/2019 6-AirHandling Units
23/37
-
7/23/2019 6-AirHandling Units
24/37
-
7/23/2019 6-AirHandling Units
25/37
-
7/23/2019 6-AirHandling Units
26/37
-
7/23/2019 6-AirHandling Units
27/37
-
7/23/2019 6-AirHandling Units
28/37
-
7/23/2019 6-AirHandling Units
29/37
-
7/23/2019 6-AirHandling Units
30/37
ec ons
MIXING BOX
DOUBLE MIXING BOXPRE FILTER
BAG FILTER
HEATERHUMIDIFIER (WASHER)
HEPA FILTER
MULTI-ZONESOUND ATTENUATOR
SUPPLY PLENUM
-
7/23/2019 6-AirHandling Units
31/37
Selectionequ re r an ng un w a
capacity of 3200 c.f.m.
3200 c.f.m. = 5440 m3
/Hr -(2.78m/s)CS-60: lower velocity but with higher
.
-
7/23/2019 6-AirHandling Units
32/37
Fan selection
Flow rate
Static pressure
FindDynamic pressure
Using flow rate and total pressure:
RPM
Sound level
-
7/23/2019 6-AirHandling Units
33/37
SILENCERS
Silencer reduces the sound power level of a fan to a required level.
Inside the rectangular casing are a number of flat splitters , depending on the widthof the silencer.
These splitters direct the airflow into small sound-attenuating passages.
The splitter is made from an envelope containing sound-attenuating material ,such as fiberglass or mineral wool, with protected non eroding facing.
p ers o en ave aroun ns ea o a a nose , o re uce e r a r ow res s ance.
-
7/23/2019 6-AirHandling Units
34/37
Split Dampers.
- .
It is a piece of movable sheet metalIt is usually installed at the Y connection of arectangular duct system
-
7/23/2019 6-AirHandling Units
35/37
Opposed-Blade Damper
It is a type of multi-blades damperthat is often rectan ular.
The damper blades may be made of , ,
stainless-steel sheets.
Rubber or spring seals can be provided at the ully closed position tocontrol the air leakage rating
The bearing used for supporting the blade axle should be made of acorrosion-resistant material such as copper alloy.
Lever linkages are used to open and close the damper blades.
-
7/23/2019 6-AirHandling Units
36/37
Gril les and Registers
A grille or grill is an outlet for supply air or aninlet for return air or exhaust air.
A register is a grille with a volume controldamper (to adjust the volume flow).
A single-deflection grille consists of a frameand one set of adjustable vanes (either verticalor horizontal vanes) to deflect the airstream.
A double-deflection register is able to deflectthe airstream both horizontally and vertically.
Extruded aluminum vanes, steel frames, steel
dampers with a baked enamel finish.
-
7/23/2019 6-AirHandling Units
37/37
Air Washers
Fans
Filters AHU and FCU modules Controls