62 compression latch - southco · 2017. 10. 18. · southco® 62 compression latch lift & turn...

96

Other options available. For complete details on variety, part numbers, installation and specification, go to

Dimensions in millimeters (inch) unless otherwise statedwww.southco.com/62

ACTUAL SIZE

21 (.83)

Do not alter this factory pre-set nut

Cup

Compression lever

Mounting bracket

**Screw and lockwasherassembly M4

27 (1.06)

45 (1.78)

1 (.06)

2 (.08) Compression

35 (1.38)21 (.83)

LIFTAND

TURN

PUSH

Deep offset cam, reversed

Shallow offset cam, reversedOffset cam, reversed

LockwasherCam retaining clip

*Cup gasket

M5 ThreadJam nut

Door thicknessMaximum 3 (.13)

Gasket

Frame

Door

41±0.3(1.63 ±.01)

17±0.3(.69 ±.01)

Frame for top latching

Frame for side latching

Door

8.6 (.34)

R 0.5 (.02) Max.

+

Latch pivot point

7(.28 )

+2- 1

+.08- .04

7(.28 )

+2- 1

+.08- .04

62 - 7 S - G F

• Low profile • Easy grip adjustment • Intuitive operation

Material and FinishZinc alloy, powder coated or chrome plated and steel, zinc plated

Performance DetailsMaximum static load: 220N (50 lbf)

Sealing Notes* Sealing the mounting screw threads required.

Installation Notes**Screw and lockwasher assembly M4 x 10. For door thickness greater than 3 (.11) calculate screw length using the following formula: Door thickness + 7 (.28)

***Add 0.4 (.02) to door thickness when using cup gasket

62 Compression LatchLift & turn series · Flush style · Adjustable grip

Part Number Selection _______________________________________________________________________________See table

S Sealing option0 No Gasket4 Gasket Included see *sealing and ***installation notes

F Finish1 Polished chrome2 Brushed chrome5 Black powder coated

G Grip Minimum Maximum Cam Type

14.5 (.17) 10.5 (.41)

Deep offset cam, forward

34.5 (1.35) 40.5 (1.59)Deep offset cam,

reversed

210.5 (.41) 16.5 (.65) Offset cam forward

28.5 (1.12) 34.5 (1.35) Offset cam reverse

316.5 (.65) 22.5 (.88)

Shallow offset cam, forward

22.5 (.88) 28.5 (1.12)Shallow offset cam,

reversed

97

ACTUAL SIZE

60 (2.4)

Flared mountingbracket

85 (3.35)

40 (1.58)

Housing

Key-locking

Lever

56 (2.20)

3 (.12) Compression

4 (.16)

ShaftM8 Thread

Jam nut

Cup gasket **(optional) 34 (1.34)

*Screw & lockwasher assembly M5

Cam retaining clipLockwasher

Tool-secured(No. 2 Phillips)

Do not alter this factory pre-set nut



Door thickness6 (.25) Maximum

Gasket FrameDoor

73±0.5(2.88±.02)

8 (.34 )Frame for top latching


Door or panel

R 3 (.13) Max. (recommended for most effective sealing)

30±0.5(1.19±.02)

8 (.34 )

14.5 (.57 )

+1- 0

+.08- .04

+.08- .04

+.04- 0

+2 -1

+2 -1

Dimensions in millimeters (inch) unless otherwise stated

62 - 4 L - G F 1 - P

• Low profile• Intuitive operation


Performance DetailsMaximum static load: 440 N (100 lbf)

Sealing NotesEnvironmental sealing is achieved by using a cup gasket and sealing the mounting screw threads.

Installation Notes*Screw and lockwasher assembly M5 x 16. For door thickness greater than 6 (.25) calculate screw length using the following formula: Door thickness + 10 (.39)

**Add 0.4 (.02) to door thickness when using cup gasket

AccessoriesCup gasket: Part number: 62-973-431

KeysPK-10-01 See page 90

NotesFor lock core selection and a complete overview of the SOUTHCO® Key-Choice System see page 158


P Packaging option3 Layer packed 2 Individually packed

www.southco.com/62

L Lock style0 Non-locking2 Key-locking without dust

shutter keyed alike CH751 3 Tool secured No. 2 Phillips20 4 mm Hex Recess21 Locking without lock core (order separately see page 158)

F Finish0 Textured chrome1 Polished chrome5 Black powder coated


16 (.23) 16 (.63) Deep offset cam, forward

56 (2.20) 66 (2.59) Deep offset cam, reversed

216 (.63) 26 (1.02) Offset cam forward

46 (1.81) 56 (2.20) Offset cam reverse

326 (1.02) 36 (1.41) Shallow offset cam, forward

36 (1.41) 46 (1.81) Shallow offset cam, reversed

___________________________________________________________________________ Part Number Selection See table

98

ACTUAL SIZE


LockwasherBracket

LIFT AND TURN

PUSH

57 (2.25)

141(5.56)

Compression lever

Lock assembly(optional, see part

number table)

Cup

*5/16-18 Mounting screw

DO NOT ALTER this factory pre-set nut

NOTE: Omit this jam nut and lockwasher for Minimum (or near-Minimum) applications for each grip range.

Lockwasher (2)Jam nut (2)

108 (4.34)

4 (.17)

65 (2.56)

5.5 (.22) Compression

CamReversed cam

Grip range (Cam as shown) 17.5 (.69) Minimum to 57 (2.25) Maximum

(Cam reversed) 70 (2.75) Minimum to 111 (4.38) Maximum

Door

Frame

Shaft, 9/16-18 thread


Gasket

25 (.98) Minimum36.5 (1.44) Maximum

132.5(5.22)

49(1.94)

Frame for top latching


25 (.98) Minimum36.5 (1.44) Maximum

Door

23.8(.94)

+



62 - 10 - 8 H 1 - 20

• Low profile when latched• Easy grip adjustment• Intuitive operation

Material and FinishZinc alloy, chrome brushed and steel, zinc plated


Installation Notes*Screw and lockwasher assembly 5/16-18UNC x 3/4. For door thickness greater than 6 (.25) calculate screw length using the following formula: Door thickness + 7 (.28)

AccessoriesActuator for three point locking assembly (order separately) Part number: 62-19-501-15

KeysSee page 90

www.southco.com/62


H Head style0 Non-locking1 Key-locking keyed alike CH751 (two flat keys supplied)

99

ACTUALSIZE


21 (.81)

3 (.11) Compression

27 (1.06)17 (.66)

13 (.50)

11 (.44)

9(.34)

32 (1.25)34 (1.34)

LockwasherJam nut

Cam retaining clip

Mounting lockwasherMounting nut

Handle

Long pin

Sleeve 3/8-24 thread

LIFTAND

TURN

ShaftM5 thread




Gasket


Ø 9.5 (.37 )

Frame fortop latching

16 (.63 )

Door

+2-1

+2-1+.08-.04

+.08-.04

16 (.63 )

8.1 (.32 )

+0.1-0.0

+.04-.0

+0.1-0.0

+.04-0




10 (0) 4 (.16)


28 (1.10) 34 (1.34)Deep offset cam,

reversed

24 (.16) 10 (.39) Offset cam, forward

22 (.87) 28 (1.10) Offset cam, reverse

310 (.39) 16 (.63)


16 (.63) 22 (.87)Shallow offset cam,

reversed

• Easy grip adjustment • Intuitive operation



62 Compression LatchLift & turn series · Handle style · Adjustable grip

www.southco.com/62

62 - 20 - G F

F Finish1 Polished chrome5 Black powder coated

100

ACTUAL SIZE


19 (.75)

16 (.63)

13 (.50) 39 (1.53)32 (1.25)

57(2.25)

5˚

55(2.15)

Handle

Long pinSleeve5/8-24thread

LockwasherJam nut

Cam retaining clip5 (.19) Compression

ShaftM8 thread

Lockwasher

Mounting nut

34 (1.34)

LIFTAND

TURN




Gasket


Ø 16.3 (.64 )Frame for

top latching

Door

Cam forward 23 (.93 )+2-1

Cam reverse 28 (1.10 )+2-1

Cam forward 23 (.93 )+2

-1Cam reverse

28 (1.10 )+2-1

13.7 (.54 )

+0.1-0.0

+.004-.0

+0.1-0.0

+.08-.04

+.08-.04

+.08-.04+.08-.04

+.004-0



• Easy grip adjustment• Intuitive operation



www.southco.com/62


62 - 10 - G F

F Finish1 Polished chrome 2 Brushed chrome 3 Natural with chemical protective film5 Black powder coated


1 42 (1.66) 52 (2.05)Deep offset cam,

reversed


32 (1.25) 42 (1.66)Offset cam,

reversed

312 (.47) 22 (.87)


22 (.87) 32 (1.25)Shallow offset cam,

reversed

101

ACTUAL SIZE




Sleeve5/8-24thread

LIFTAND

TURN

13 (.50)

19.5 (.77)

32 (1.25) 42 (1.65)

5 (.19) Compression

79 (3.13)

80 (3.16)

Gasket

34 (1.34)ShaftM8 thread

LockwasherJam nut

Cam retaining clip

Lockwasher

Mounting nut

Handle

Long pin


Gasket


Ø 16.3 (.64 )Frame for

top latching

Door

Cam forward 23 (.93 )+2-1

Cam reverse 28 (1.10 )+2-1

Cam forward 23 (.93 )+2

-1Cam reverse

28 (1.10 )+2-1

13.7 (.54 )

+0.1-0.0

+.004-.0

+0.1-0.0

+.08-.04

+.08-.04

+.08-.04+.08-.04

+.004-0



62 - 30 - G F

• Easy grip adjustment

• Intuitive operation



NotesLarger sizes available, visit www.southco.com/62


F Finish1 Polished chrome2 Brushed chrome5 Black powder coated

www.southco.com/62


10 (0) 5 (.20)


45 (1.77) 55 (2.16)Deep offset cam,

reversed


35 (1.37) 45 (1.77)Offset cam,

reversed

315 (.59) 25 (.98) Shallow forward

25 (.98) 35 (1.37) Shallow reversed

21Refer to our Southco 2003 Handbook or visit www.southco.com for expanded product listings.

Co

mp

ression

Latches

Southco® 62 Compression LatchLift & Turn

Part Number 62-424-700Grip Range

(mm)Cam Off set

(mm)Cam PartNumber

10.5 to 12.4 -14 E5-600312.5 to 14.4 -12 E5-600414.5 to 16.4 -10 E5-600516.5 to 19.4 -8 E5-600620.5 to 21.4 -4 E5-600821.5 to 23.4 -2 E5-600923.5 to 25.4 Flat E5-601025.5 to 27.4 2 E5-601127.5 to 29.4 4 E5-601229.5 to 30.4 6 E5-601331.5 to 33.4 8 E5-601433.5 to 35.4 10 E5-601535.5 to 37.4 12 E5-601637.5 to 39.4 14 E5-601739.5 to 40.4 16 E5-601841.5 to 43.4 18 E5-601943.5 to 45.4 20 E5-602045.5 to 47.4 22 E5-602147.5 to 49.4 24 E5-6022

19.2

21.1

84

39

45

428.8

15

57

25 REF

20

35

5

30.6 CLOSED35.6 OPEN

R8

5

28

8.4

GRIP

The composite Lift & Turn latch is a light- to medium-duty latch, utilizing engineering plastic in its major components to reduce weight yet maintain excellent strength. When the lever is in the upright position, it rotates 360° to move the cam behind the support in any one of three 90° positions. Once in place, the lever closes fl ush with the housing, providing 5 mm of axial pull, locking the device with an over-center action.

The latch is secured into a panel by a mounting bracket that adjusts to various thicknesses. Snap-in installation is provided for 5 mm thick panels. By using cams of various off sets, diff erent grip ranges are easily accommodated.

Features• Broad Application Range Latch can be fi tted to panel range 0.5 mm

– 9.0 mm and has a grip range of between 10.5 mm – 49.4 mm

• Double Action Latching & Compression Allows secure fastening of doors and

panels which contain gaskets and seals

• No Adjustments Required When Fitted Fixed cam design prevents incorrect grip

setting

• 4 Cam Orientation Settings Cam may be fi tted at 90° / 180° / 270° /

360° to the latch body center line, allowing for a wide variety of mounting positions

• Robust Polyamide Construction High strength nylon is used in the main

components to ensure a durable product. The material has a V2 fl ammability rating to UL94

Typical Applications• Telecoms base station doors & side access

panels• Electrical switchgear cabinets• Computer server racks & enclosures• Games machine doors & panels• HVAC control equipment enclosures• Storage lockers on stations/building sites• Cupboards/lockers on trains/boats/

commercial vehicles

Parts SelectionLatch bodies and cams are ordered separately. Choose cam based on grip range required for your application.

Latch Body

Notes:1. Panel hole dimensions: 73 mm x 30 mm for panel thickness 0.5 mm to 5.0 mm;

75 mm x 30 mm for panel thickness 5.1 mm to 9.0 mm.2. Latch shown in closed position.

Cam

All dimensions on this page are in millimeters.

54 • Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility.

Com

pre

ssio

n L

atc

hes

Fix

ed

65.5(2.57)

51(1.97)

MOUNTING NUT

LOCKWASHER

PAWL

ACTUATOR

38(1.51)

JAM NUT

LOCKWASHERGASKET31(1.21)

133.4(5.25)

20(.78)

PIN

REVERSED PAWL

SHAFT,7/16-20Thread

NOTE: Omit this jam nut and lockwasher for minimum (or near-minimum) applicationsfor each grip range.

PAWL-POSITIONING PIN

SLEEVE7/8-20 Thread

5.5 (.22) PULL-UP

GRIP (pawl reversed)35 (1.375) MIN. to 67 (2.625) MAX.GRIP RANGE (pawl forward)

5 (.187) MIN. to 36.5 (1.437) MAX.

MAX. OUTER PANELTHICKNESS = 9.5 (.375)

FRAME

ACTUATOR2 holes,Ø 6.5 (.257)

25(1.00)

44.5 (1.75)

60 (2.37)

HANDLE

LIFTAND

TURN

PART NUMBER62-10-603-10 •62-10-603-20 •

Polished chromeBrushed chrome

Southco® Compression LatchesLift and Turn Series, Handle Style• Medium and Large sizes• Use actuator with Large size for 3-point latching (See pages 160 to 164)

Large

PAWL REVERSEDPAWL FORWARD

LOCKWASHER

JAM NUT

PAWL RETAINING CLIP

MTG. LOCKWASHER

SLEEVE5/8-24Thread

HANDLE

LONG PIN

LIFTAND

TURN

13 (.50)

19.5(.77)

32 (1.25) 42 (1.65)

5 (.19) PULL-UP

MAX. OUTER PANELTHICKNESS = 6 (.234)

GRIP (SEE TABLE)

79(3.13)

80(3.16)

MOUNTING NUT

GASKET

34(1.34)

SHAFTM8 Thread

62-30-21 •45 (1.77)35 (1.37)62-30-31 •35 (1.37)25 (.98)62-30-31 •25 (.98)15 (.59)62-30-21 •15 (.59)5 (.20)

0 (0) 5 (.20) 62-30-11 •

MIN POLISHEDCHROME

PART NUMBER GRIP

MAX

62-30-11 •55 (2.16)45 (1.77)62-30-22 •62-30-32 •62-30-32 •62-30-22 •62-30-12 •

62-30-12 •

BRUSHEDCHROME

BLACKPOWDERCOATED

62-30-25 •62-30-35 •62-30-35 •62-30-25 •62-30-15 •

62-30-15 •

Medium

millimeter (inch)

millimeter(inch)

Dimensions without tolerances are for reference only.

55• Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility.

Com

pre

ssion L

atch

es

Fix

ed

Installation

1. Locate and orient hole with respect to handle in latched position as shown in next step. This hole orientation is preferred for all latching positions.

3. Pawl should be adjusted to GRIP measurement with the door open and the handle in the LATCHED position. Use two wrenches to tighten.

LIFTAND TURN

2. Assemble as shown.

AB

C

A

FRAMEfor sidelatching

FRAME for top latching

DOOR

DIMEN-SIONS

A

B

C

SERIESMEDIUM LARGE

16.5(.640

+0.1-0.0+.005-.000 )

Ø 22(.875

+0.2-0.0+.010-.000 )Ø

13.7(.540

+0.1-0.0+.005-.000 )

19(.750

+0.2-0.0+.010-.000 )

23(.93 ±.06)

+2-1 41

(1.623)

47.5(1.875)

PAWLFORWARD

28(1.10 ±.06)

+2-1 PAWL

REVERSED

MIN.

MAX.

Material and FinishHANDLE and SLEEVE: Die-cast zinc (see table). WASHER and SPRING: 302 Stainless steel, passivated. O-RING: Buna-N rubber, natural. LONG PIN and SHAFT: 303 Stainless steel, passivated or passivated with black oxide. GASKET: Fibre, natural. PAWL POSITIONING PIN: 303 Stainless steel, natural or with black oxide.

For medium style BUSHING: Aluminum, natural or with black organic coating. NUTS: Low carbon steel, zinc plate, chromate plus sealer. PAWL and PAWL RETAINING CLIP: 1010 Steel, zinc plate,chromate plus sealer.

For large style PAWL and ACTUATOR: 1010 Steel, zinc alloy plate, bright chromate plus sealer. WASHER: 303 Stainless steel, passivated. BUSHING: Aluminum, natural. MOUNTING NUT: Brass, zinc plate, chromate plus sealer. LOCKWASHERS: Spring steel, zinc alloy plate, bright chromate plus sealer. JAM NUTS: Low carbon steel, zinc alloy plate, bright chromate plus sealer.

Note: Contact Southco for informa-tion on handles without lettering.

Product Strength Guidelines

Medium style Maximum static load: 670 N (150 lbs.) Average ultimate load: 1100 N (250 lbs.) Large style Maximum static load: 890 N (200 lbs.) Average ultimate load: 1550 N (350 lbs.)

2 or 3-pointlatching systemsavailable!

See pages 160 to 164for details.

(To assist in your product selection; samples are available for your evaluation.)

56 • Products identified with this symbol are stocked subject to prior sale in one or more of our global locations. If unavailable from our facility nearest you, allow for shipping time from another facility.

Com

pre

ssio

n L

atc

hes

Fix

ed

NOTE: Rotate pawl to desired latching position.

LIFTANDTURN

2. Assemble as shown. 3. Pawl should be adjusted to GRIP measurement with the door open and the handle in the LATCHED position. Use two wrenches to tighten.

Material and FinishHANDLE and SLEEVE: Die-cast zinc, chrome plated. MOUNTING NUT and PAWL: Die-cast zinc with chemical protective film. GASKET: Fibre, natural. SPRING and WASHER: 302 Stainless steel, passivated. O-RING: Buna-N Rubber, natural. LONG PIN: 303 Stainless steel, natural. PAWL POSITIONING PIN: 1213 Steel, zinc alloy plate, bright chromate plus sealer. SHAFT and BUSHING: Low carbon steel, zinc alloy plate, bright chromate plus sealer. JAM NUTS: Low carbon steel, zinc plated plus chromate dip. LOCKWASHER: Spring steel, zinc plated plus chromate dip. PAWL LOCKWASHERS: Spring steel, zinc plated plus bright chromate dip.

OPTIONAL PADLOCK BRACKET: 302 Stainless steel, passivated.

FOR 3-POINT LATCHING SYSTEMS ACTUATOR: 1010 Steel, zinc alloy plate, bright chromate plus sealer.

Product Strength Guidelines

Maximum static load: 1250 N (280 lbs.) Average ultimate load: 2200 N (500 lbs.)

Southco® Compression LatchesLift and Turn Series, Handle Style• Heavy-duty • Optional padlock bracket• Use with actuator for 3-point latching (See pages 160 to 164)

65(2.56)

183(7.19)

JAM NUTLOCKWASHER

LOCKWASHER

MOUNTING NUT

HANDLE

GASKET

NOTE: Omit this jamnut and lockwasher for minimum (or near-minimum) applicationsfor each grip range.

38(1.50)

45(1.78)

PIN

PANEL

19(.75)

8(.313)

16 (.625)

Two mounting holes, Ø 7 (.281)

OPTIONAL PADLOCK BRACKETOrder Separately (see below).

PAWL-POSITIONING PIN

81.4(3.20)

6.4 (.25) PULL-UP

SHAFT, 9/16-18 Thread

143(5.63)

FRAME

SLEEVE 1"-20 Thread

PAWL

REVERSEDPAWL

GRIP (pawl reversed)57 (2.250) MIN. to 89 (3.500) MAX.

GRIP (pawl forward)3 (.125) MIN. to 35 (1.375) MAX.

MAX. OUTERPANEL THICKNESS= 16 (.625)

Ø 16 (.63)hole for padlock

PART NUMBER

62-10-503-10 •62-36-501-24 •62-19-501-15 •

Handle Assembly

Padlock Bracket

Actuator

LIFTAND

TURN

(To assist in your product selection; samples are available for your evaluation.)

FRAMEfor sidelatching

FRAME for top latching

DOOR

47.5 (1.875) MIN.57 (2.250) MAX.

25(1.000

+0.2-0.0+0.10.000 )

47.5 (1.875) MIN.57 (2.250) MAX.

22+0.2-0.0

(.875 +0.10.000 )

Installation1. Locate and orient hole with respect to handle in latched position as shown in next step. This hole orientation is preferred for all latching positions.

millimeter (inch)

millimeter(inch)

Dimensions without tolerances are for reference only.

25 (1.00) widerods MAX.

83 (3.25)

Two holes,Ø 6.5 (.257)

PAWL

SHAFTJAM NUT

3(.13)

31.7(1.25)

31.7(1.25)

LOCKWASHER25

(1.00)

ACTUATOR

9.5 (.38)

PAWL

2 or 3-point latching systems available!See pages 160 to 164 for details.

ACTUATOR for 3-point latching.

62 compression latch - southco · 2017. 10. 18. · southco® 62 compression latch lift & turn...

Documents