63b33e01multimeter and pro-link 9000

7/27/2019 63b33e01Multimeter and Pro-Link 9000

1/22

TMDE

Test Measurement Diagnostic Equipment


2/22

TESTMEASUREMENT

DIAGNOSTIC

EQUIPMENT


3/22

AN/PSM 45

Digital Multimeter


4/22

AN/PSM 45 multimeter

Measures resistance, ac and dc voltage andcurrent.

Can measure up to 5,000 v AC or DC withhigh voltage probe.

Has a current shunt that extends range of

multimeter to 10 amps AC or DC. Pushbutton power, function, and rangeswitches simplify operation.


5/22

AN/PSM 45A or FLUKE 27

Digital Multimeter


6/22

AN/PSM 45A or FLUKE 27 MULTIMETER

Takes basic voltage, current, and resistance

measurements.

Can measure up to 6,000 v with the high voltage probe.

11 position rotary selector switch.


7/22

Range - select voltage desired voltage range.

Meter is auto-ranging at all times.

Can be changed to manual ranging with thisswitch.

Relative mode - shows difference between two

readings Minimum/maximum - shows minimum and

maximum readings during test

ROTARY SWITCH


8/22

Hold - holds current measurement.

Volt, Ohms, Diode test terminal:1. Connects red test lead for volt and

ohms testing.

2. This terminal is also used for diode

testing.

ROTARY SWITCH CONT


9/22

mA and A input - connects red test lead for

ac and dc current measurements. 1. mA scale - up to 320 mA.

2. A scale - up to 10 A (20A for 30seconds).

SYMBOLS


10/22

Com. input - connects black lead for all

measurements.

Buzzer - sounds tone for pulse detection and

continuity functions when this function is

selected on the rotary switch. .

ROTARY SWITCH CONT


11/22

Pro-Link 9000

Diagnostic Reader


12/22

Pro-Link 9000

The (DDR) diagnostic data reader receives

information from the vehicle on board

computer, or ECM, through a connector

called the (DDL) display data line.

Power source - from vehicle being tested.

Protector circuit - internal 2 amp fuse.


13/22

Pro-Link 9000

Powered by the vehicle J1708 port or

cigarette lighter adapter.

Gathers vehicle data.

Used with vehicle that have (DDEC) or

(ATEC) systems.


14/22

Pro-Link 9000

Removal cartridges

DDEC

ABS

ATEC


15/22

Pro-Link 9000

DDEC - Detroit Diesel Electronic Control

ABS- Anti-Locking Braking System

ATEC - Allison Transmission Electronic

Controls


16/22

Pro-Link 9000

Pushbutton - cylinder cutout test manual

Data Readout - Identifies from ECM what

system DDEC II or DDEC III.

The Pro-Link has to function selection

menu: [ENGINE] or [PRO-LINK].


17/22

Engine Functions

Diagnostic Codes

View Calibration

Fuel Injector Information Engine / Trip Data

Calibration Change

Switch / Light Stats

Activate Outputs

MIDs Received

Reset Components

Sub-Menus:


18/22

Diagnostic Codes

Active Codes

Inactive Codes

Clear Codes

Diagnostic Code Description Option


19/22

View Calibration

Engine Configuration

VSG Configuration

Engine Protection

Idle Shutdown

Cruise Control

ECM Ins/Outs

Progress Shift


20/22

Fuel Injector Information

Cylinder Cutout

Response Times

Calibration Update

Change Date


21/22

Sub-menus that follow:

Engine Trip Data

Calibration Change

Switch/Light Statistics

Activate Outputs

MIDs Received

Reset Components


22/22

CONDUCT A CHECK ON LEARNING

63b33e01multimeter and pro-link 9000

Documents