65420776 nsn core complete integration
DESCRIPTION
iNTEGRATIONTRANSCRIPT
![Page 1: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/1.jpg)
Integration Activity
![Page 2: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/2.jpg)
CONTENTS
Mod 1- Integration Activity Basic review of Telecom Architecture
Integration activity
Briefing about Signaling link, Signaling link set, Route set, Trunk Group (CGR), GT Analysis, SCCP, Tree Analysis
Mod 2- MGW Integration Integration of MGW with MSS
Sigtran link configuration
Integration with BSC
Mod 3- MSS Integration Sigtran link creation in MSS
Signaling link & CGR creation towards BSC
TDM link creation with other NEs.
MOD 4- Configuration for First call in MSS & MGW Data base definition for Voice & Data call
Other system data base creation
Definition for Location update & SMS
![Page 3: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/3.jpg)
Network Architecture
![Page 4: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/4.jpg)
Integration activity
Integration of MSS with HLR a) Location Update.
b) Authentication & Ciphering
c) TDM connectivity
Integration of MSS with MSS/MSC a) For Traffic Handling.
b) For Handover
c) Enhanced Network Coverage in a PLMN.
d) TDM and IP connectivity.
Integration of MSS with GMSC/GCS a) For Traffic Handling.
b) For POI and Gateways Connectivity
c) Efficient Routing.
d) TDM and IP connectivity.
Integration of MSS with SMSC a) SMS services.
b) TDM connectivity
![Page 5: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/5.jpg)
Integration activity
Integration of MSS with MGW a) Connectivity to BSC‟s
b) Connectivity to other POIs.
c) Connectivityto other NE
Integration of MSS with CDS a) Data Call & Fax Call.
b) IP connectivity.
Integration of MSS with SRBT/CRBT a) Caller tune service
b) TDM connectivity
Integration of MSS with BSC via MGW a) BTS and BSC handling
b) TDM & IP connectivity.
![Page 6: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/6.jpg)
Signalling Link
Two Signalling nodes represented by their point
codes can be connected using Signalling Link.
In European Standard links between nodes are full-
duplex 64kbps within an E1 facility.
Signalling Link can be TDM or IP based.
ZNCC
ZNCC:36:258-1,64,1,1:CCSU,6:0:;
Signalling link no.
Term id and TSL
Speed in Bit rate
Time slot
MTP 2 req.
Signalling link parameter
set no.
![Page 7: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/7.jpg)
Signalling Link
Adding signalling link to Signalling Link Set
ZNSA:NA1,D‟191,X3H02:36,0;
signalling point code
signalling link set name
Signalling link no.
signalling link code
![Page 8: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/8.jpg)
Signalling Link Set
In SS7 one or more signaling links can be
connected to the same two endpoints that
together form a signaling link set
Signaling links are added to link sets to
increase the signaling capacity of the link set.
ZNSC ZNSC:NA1,D'191,X3H02:36,0:,:::;
![Page 9: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/9.jpg)
Signalling Link Set
Activation of Signalling link set
ZNLA:102:; ------- Activation Allowed
ZNLC:102,ACT:; ------- Changing Activation state
![Page 10: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/10.jpg)
Signalling Route Set
Signalling Route - Chain of signalling link sets and signalling transfer points which can be used as a path by the signalling point when routing a message towards a specific signalling point
Signalling Route Set - Combination of all permitted signalling routes that may be used to pass signalling messages from a signalling point to a specific destination
Each Signalling Route Set are associated with a Signalling Route Set Parameter set that defines its own signalling function.
In general, the predefined parameters are the most suitable ones to be used.
ZNRC
ZNRC:NA1,D„3022,MSS5,0,D,N:NA1,D'15006,M7GW2,7::::;
ZNRC:NA1,D'15006,M7GW2,6,D,N:NA1,D'15006,M7GW2,7::::;
![Page 11: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/11.jpg)
Signalling Route Set
Activation of Signalling Route Set
ZNVA:NA0,D‟333:NA0,2810:; ------------- Activation allowed
ZNVC:NA0,D‟333:NA0,2810:ACT; ------------- Change Activation status
![Page 12: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/12.jpg)
GT Analysis
GT Analysis - Analysis in which the numbering plan, nature of address, and translation type determine an analysis tree from which the analysis result is derived, based on the digit sequence included in the address or translation type
GT Translation - Analysis of the global title in order to find out the signalling connection control part (SCCP) routing address
ZNAC - Global Title Results
ZNAC:NET=NA1,DPC=D'192,RI=GT,::GTR=4,:;
![Page 13: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/13.jpg)
GT Analysis
ZNBC – Global Title Analysis
ZNBC:ITU=4,:NP=7,NAI=4:919732:2;
ZNBC:ITU=4,:NP=1,NAI=4:919839000013:4:;
![Page 14: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/14.jpg)
SCCP
The SCCP layer can use a Signalling Point Code
(SPC) as the destination SCCP address even when
the functional application and the MAP layer uses a
GT
That there must be a route set on the MTP level to
all Signalling Points (SP) known by the SCCP.
Applications that use SCCP services are defined as
subsystems which are identified by a Subsystem
Number (SSN).
![Page 15: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/15.jpg)
SCCP
The subsystems can be SCCP management
(SCMG), MSC MAP, VLR MAP, HLR MAP,
INAP, OMAP, and possibly some network-
specific subsystems, like Base Station
System Application Part (BSSAP).
ZNFD
ZNFD:NA1,D'192,0:6,MAPH,0,Y:8,MAPM,0,Y::::;
![Page 16: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/16.jpg)
SCCP
Activation of SCCP Signalling point
ZNGC:NA1,D'3030:ACT:;
Activation of SCCP Subsystem
ZNHC:NA1,D'3030:6:ACT;
ZNHC:NA1,D'3030:7:ACT;
![Page 17: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/17.jpg)
Trunk Group (CGR)
Circuits - Transmission channels permitting
bidirectional transmission of signals between
two points, to support a single
communication.
Circuit Group - Group of circuits that have the
same purpose and are traffic-engineered as a
unit.
![Page 18: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/18.jpg)
Trunk Group (CGR)
External circuit groups are created to connect
circuits between two exchanges.
These circuits are used for carrying speech
or data between these network elements.
The circuit group identifies the direction and
register signalling.
![Page 19: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/19.jpg)
Trunk Group (CGR)
ZRCC - Creating CGR
ZRCC:TYPE=ECCS,NCGR=S22G06,CGR=2001:DIR=BI,NET=
NA1,SPC=D'9395,LSI=IU5NI,IFAC=5,UPART=4:METHOD=1,IN
R=INIK4,TREE=80,NCCP=BASICINPSTNPBX,MGW=M2G2V17
:;
![Page 20: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/20.jpg)
Trunk Group (CGR)
ZRCA - Adding circuits to
CGR
ZRCA:NCGR=S22G06:TERMID=1287-1&&-
15,:CIC=1,CICDIR=0,:UNIT=ISU,:;
![Page 21: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/21.jpg)
Trunk Group (CGR)
ZCRM - Activation of CGR
ZCRM:NCGR=S22G06:WO;
![Page 22: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/22.jpg)
Trunk Group (CGR)
ZCEC – Activation Of
Circuits
ZCEC:NAT=NA1,SPC=D'9395,CIC=0&&254,:WO:;
![Page 23: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/23.jpg)
Tree Analysis
Digit analysis - It is the Analysis done in CM for Identifying dialed digits and routing it to respective Destinations.
Analysis tree - A chain of records in an analysis file, used for analysing different types of digits.
1. Circuit group (TOCs and PBX calls)
2. General Parameter file PRFILE (in MOCs)
3. End-of-Selection analysis (forwarding and roaming calls)
4. MSISDN digit analysis (some roaming calls)
5. CM (if the digit analysis is sent back for reanalysis)
![Page 24: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/24.jpg)
ANALYSIS TREE
ANALYSIS
RESULT
FILE
CHARGING ORIGIN
TYPE OF NUMBER
DIALLING (after preanalysis)
CM
ANALYSIS FILES
ANALYSIS RESULT FILES HLR INQUIRY
GSM-TERMINATING CALL
HANDOVER BETWEEN TWO EXCHANGES
CALL TO DDA
NUMBER MODIFICATION
IN CALL
OUTGOING CALL TO TRUNK CIRCUIT
ANNOUNCEMENT
1. OUTGOING ROUTE
2. SPECIAL ROUTE
To find the destination according to the dialled
number
Tree Analysis
![Page 25: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/25.jpg)
Tree Analysis
ZRDE – Creation of Destinations and Sub-
destinations (Assumed SPR or routes are already
created)
ZRDE:NSDEST=PREPCC:SPR=13,CT=SC,SP=3,MNL=0,:;
ZRDE:NDEST=PREPCC,ALT=0:NSDEST=PREPCC,:NCHA=CHARGE,:;
![Page 26: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/26.jpg)
Tree Analysis
ZRDC – Digit Analysis
ZRDC:DIG=1909,TREE=93,TON=SUB,:NDEST=PREPCC,:;
![Page 27: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/27.jpg)
Tree Analysis
`
2
50
48
30
20
70
Digit Analysis
MOC
Service number
Announcement number
Call forwarding
TOC / Inter MSC
MSRN (from HLRENQ)
/ HON (from HO_REQ)
![Page 28: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/28.jpg)
Tree analysis
List of commonly used trees
Call Case Number Tree TON Source
MOC B-number - national 2 NAT PRFILE
B-number - International 2 INT
B-number - Local 2 SUB
Call forwarding C-Nbr. – national 20 NAT EOS-analysis, cause code
C-Nbr.-International 20 INT 100E (CFU) and 100F (conditional CFW)
Service call Service Numbers 30 NAT area serv. numb.handling
Announcement Announcement number 48 UNK PRFILE
Automatic call redirection
Automatic call redirection number 49 NAT PRFILE
Roaming MSRN-National/Handover nbr. 50 NAT EOS, cause code 1009
MSRN-International 50 INT
TOC TOC-number - National 70 >> NAT circuit group (can be
TOC-number –International 70 >> INT changed easily)
![Page 29: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/29.jpg)
MGW Integration
Configuring IP connectivity for MSC Server
SIGTRAN
H.248 (or MEGACO)
Configuring TDM resources for integrated
MSS
![Page 30: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/30.jpg)
Configuring IP connectivity for MSC Server
Configuring IP version 4 interface ZQRN:ISU,1::EL0:10.48.32.40,L,:1500:UP:;
![Page 31: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/31.jpg)
Create default static route ZQKC:ISU,1:10.48.32.128,25:10.48.73.65:LOG;
Configuring IP connectivity for MSC
Server
![Page 32: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/32.jpg)
Configuring SCTP multihoming ZOYN:ISU,1:IPV4:"10.48.68.100","10.48.76.100";
Configuring IP connectivity for MSC
Server
![Page 33: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/33.jpg)
SIGTRAN
Configuration of SIGTRAN consists of an
SCTP part and an M3UA part.
![Page 34: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/34.jpg)
SIGTRAN
(SCTP)
SCTP is a reliable transport protocol
operating on top of a potentially unreliable
connectionless packet service such as IP.
It offers acknowledged error-free non-
duplicated transfer of messages
![Page 35: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/35.jpg)
SIGTRAN
(SCTP)
ZOYC - Creation of Association set
ZOYC:MSS1:C:M3UA:;
![Page 36: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/36.jpg)
ZOYA – Adding Association to
Association set
ZOYA:MSS1:ISU,1:SCTP:;
SIGTRAN
(SCTP)
![Page 37: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/37.jpg)
SIGTRAN
(SCTP)
ZOYP – Configuring
Association
ZOYP:M3UA:MSS1,0:"10.48.72.164","10.48.80.164",:"10.48.21.4",25,"1
0.48.25.4",25,:;
![Page 38: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/38.jpg)
SIGTRAN
(SCTP)
ZOYS – Activating Associations
ZOYS:M3UA:MSS1,0:ACT:;
![Page 39: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/39.jpg)
SIGTRAN
(M3UA)
The M3UA in SIGTRAN (SS7 MTP3-User
Adaptation Layer) provides the applications
with the same services as the MTP3
It routes the MTP layer 3 messages from the
applications to the correct SCTP
associations.
The M3UA Signalling channel acts as a link
to the logical SCTP association set which
leads to the next network element
![Page 40: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/40.jpg)
SIGTRAN
(M3UA)
ZNSP - Create the IP signalling
link together with the signalling link
set (used to exchange MTP signalling messages.)
ZNSP:NA1,D„9395,MSS01:0:MSS1:;
![Page 41: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/41.jpg)
SIGTRAN
(M3UA)
ZNRC – Creating Signalling
Route& attaching IP Signalling
Link to it.
ZNRC:NA1,D'9395,MSS01,0,D,N:NA1,D'9395,MSS01,7:;
![Page 42: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/42.jpg)
SIGTRAN
(M3UA)
Activate Signalling Link and
Signalling Route Set by ZNLA,
ZNLC , ZNVA & ZNVC
![Page 43: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/43.jpg)
H.248
H.248 or MEGACO is the interface between
MSS and MGW to control user - plane
resources.
This interface is implemented by establishing
control connection between signalling unit
(CCSU / SIGU) in MSS to signalling unit
(ISU) in MGW.
![Page 44: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/44.jpg)
In MSS, this is implemented by creating
MGW and in MGW it is implemented by
creating virtual MGW.
User plane resources for MSC server can be
created only after H.248 interface is created
between MSS and virtual MGW.
H.248
![Page 45: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/45.jpg)
To configure H.248 control interface for MSC Server
1. Add new MGW - Select the signalling unit at MSS side, which communicates with the MGW.
2. Configure MGW
a. Add MGW to MSS's MGW database.
b. Select the signalling unit in MSS side, which communicates with
the MGW.
c. Configure H.248 –specific data.
d. Configure E.164 address of the MGW.
e. Configure each virtual MGW 's domain name and IP address.
f. Configure peer MSS's IP addresses and domain names of each
virtual MGW.
3. Register MGW
a. Check that registration is enabled from the MGW at MSS side.
b. Activate registration process in the MGW.
H.248
![Page 46: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/46.jpg)
H.248
(Multimedia Gateway in MSS)
ZJGC - Create MGWs in MSS
ZJGC:MGWID=0,ADDR="172.23.71.36",PORT=8009,NAME=RNMG280,MGWTYP=GEN:
UTYP=SIGU,UINX=0,UADDR="172.23.6.132",AESA="E-919934129052",
LBCU=2800,REGA=Y,TTY=SCTP,NBR=3,:USEPARS=0,DEFPARS=0,:;
![Page 47: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/47.jpg)
H.248
(Multimedia Gateway in MSS)
ZJGR – Registering
MGWs in MSS
ZJGR:MGWID=17:METD=1,REGA=Y,:;
( Registration should be done at both
MGW and MSS side simultaneously)
![Page 48: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/48.jpg)
ZJVC – Create VMGW‟s in MGW
ZJVC:VMN=M5G1V11,UINX=11,:OIP="10.237.1.78",OPN=8009,:A2T=,::;
H.248 (Multimedia Gateway in MGW)
![Page 49: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/49.jpg)
ZJVA – Adding control data
in VMGW
ZJVA:VMN=M5G1V11,:CNT=0,:PIP="10.236.1.17",:SIP="10.236
.9.17",::;
H.248
(Multimedia Gateway in MGW)
![Page 50: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/50.jpg)
ZJVR – Registering VMGW‟s
in MGW
ZJVR:VID=10,:REGA=1,:;
H.248 (Multimedia Gateway in MGW)
![Page 51: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/51.jpg)
Check connected
functions of used ET with
ZWTI.
Configuring TDM resources for integrated MSS
![Page 52: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/52.jpg)
ZRCC - Create CGR
ZRCC:TYPE=ECCS,NCGR=S22G06,CGR=2001:DIR=BI,NET=N,SPC=D'9395,LSI=IU5NI,IFAC=5,UPART=4:METHOD=1,INR=INIK4,
TREE=80,NCCP=BASICINPSTNPBX,MGW=M2G2V17:;
`
ZRCC:TYPE=SPE,NCGR=S22G06,CGR=2001:USE=VMGW:;
MSS side
MGW side
Configuring TDM resources for integrated MSS
![Page 53: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/53.jpg)
ZRCA – Adding Circuits to CGR
ZRCA:NCGR=S22G06:TERMID=1287-1&&-
15,:CIC=1,CICDIR=0,:UNIT=SIGU,:;
ZRCA:NCGR=S22G06:CRCT=32-0&&-
10;
MSS side
MGW side
Configuring TDM resources for integrated MSS
![Page 54: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/54.jpg)
ZRRC – Creating Route
ZRRC:INT,ROU=2000,NCGR=S22G06,OUT
R=ONIK5,NCCP=BASICOUTPSTNPBX,,,:;
Configuring TDM resources for integrated MSS
![Page 55: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/55.jpg)
ZJVM – Attach CGR to VMGW
ZJVM:VMN=M5G1V11:NCGR=S22G06;
(VMGWs should be de-registered before attaching and should be registered after attaching CGR)
Configuring TDM resources for integrated MSS
![Page 56: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/56.jpg)
ZCEC – Change state of
Circuits in MSS ZCEC:CRCT=3-2&&-15:SE;
ZCEC:CRCT=3-2&&-15:WO;
Configuring TDM resources for integrated MSS
![Page 57: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/57.jpg)
ZCIM – Change state of
Circuits in MGW
ZCIM:CRCT=49-1&&-31:WO;
Configuring TDM resources for integrated MSS
![Page 58: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/58.jpg)
Change State of CGR , circuits in MSS
ZCRM:NCGR=TEST1:WO;
Configuring TDM resources for integrated MSS
![Page 59: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/59.jpg)
BSC Integration
MGW END
ATER INTERFACE CONFIGURATION: 1. ZR2S:ET=239:NBR=2:;
2. ZR2C:ET=239:TCPCM=1,CPOOL=23,APCM=11184,:;
3. ZR2C:ET=239:TCPCM=2,CPOOL=23,APCM=11185,:;
4. ZR2C:ET=239:TCPCM=3,CPOOL=23,APCM=11186,:;
5. ZR2C:ET=239:TCPCM=4,CPOOL=23,APCM=11187,:;
![Page 60: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/60.jpg)
CREATE SIGNALLING LINK 1. ZNCN:92:239-31,64:ISU,3:0:;
BSC Integration
![Page 61: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/61.jpg)
CREATE LINKSET & ADD LINKS TO
LINKSET: 1. ZNSC:NA1,D'304,Z3BN4:92,0:;
2. ZNSA:NA1,D'304,Z3BN4:93,1:;
BSC Integration
![Page 62: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/62.jpg)
CREATE ROUTESET AND ADD AOPC(MSS POINT CODE) 1. ZNRC:NA1,D'304,Z3BN4,1,D,N:,,,7:;
2. ZNRB:NA1,D'304:AOPC=D'7151:;
BSC Integration
![Page 63: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/63.jpg)
ACTIVATION 1. ZNLA:92&93;
2. ZNLC:92,ACT;
3. ZNVA:NA1,D'304::;
4. ZNVC:NA1,D'304::ACT:;
BSC Integration
![Page 64: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/64.jpg)
CIRCUIT GROUP AND CIRCUITS 1. ZRCC:TYPE=SPE,CGR=340,NCGR=BNI004:USE
=VMGW:;
2. ZRCA:CGR=340:CRCT=11184-1&&-31:;
3. ZRCA:CGR=340:CRCT=11185-1&&-31:;
BSC Integration
![Page 65: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/65.jpg)
ADD CIRCUIT GROUP TO VMGW 1. ZJVE:VMN=MG1SHLV08,:CGR=340,:;
BSC Integration
![Page 66: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/66.jpg)
STATE OF CIRCUIT GROUP AND
CIRCUITS 1. ZCIM:CGR=340:WO;
2. ZCIM:CRCT=11184-1&&-31:WO;
3. ZCIM:CRCT=11185-1&&-31:WO;
BSC Integration
![Page 67: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/67.jpg)
MSS END
CREATE ROUTE SET VIA
MGW:
ZNRC:NA1,D'306,Z3BN6,1,D,N:NA1,D'110
0,MG1SH,7:;
BSC Integration
![Page 68: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/68.jpg)
ACTIVATION OF ROUTE SET
ZNVA:NA1,D'306:NA1,D'1100:;
ZNVC:NA1,D'306:NA1,D'1100:ACT:;
BSC Integration
![Page 69: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/69.jpg)
CIRCUIT GROUP AND CIRCUITS
ZRCC:TYPE=ECCS,CGR=340,NCGR=BNI004:DIR=OUT,NET=NA1,SPC=D'304,LSI=AIF02,IFAC=25,UPART=5:MGW=MG1SHLV08:;
ZRCA:CGR=340:TERMID=11184-1&&31,: CIC=1,CICDIR=0,::UNIT=BSU,INDEX=1:;
ZRCA:CGR=340:TERMID=11186-1&&-31,:
CIC=65,CICDIR=0,::UNIT=BSU,INDEX=3:;
BSC Integration
![Page 70: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/70.jpg)
SCCP & SUBSYSTEMS : 1. ZNFD:NA1,D'304,1:FE,BSSAP,1,Y:;
2. ZNGC:NA1,D'306:ACT:
3. ZNHC:NA1,D'306:FE:ACT:;
BSC Integration
![Page 71: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/71.jpg)
CREATE ROUTE: 1. ZRRC:EXT:ROU=318,OUTR=OMCG0,NCCP
=BASICOUTPSTNPBX,STP=1,TON=UNK,N
CGR=BNI004,:;
BSC Integration
![Page 72: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/72.jpg)
CIRCUIT GROUP AND
CIRCUITS: 1. ZCRM:NCGR=BNI004:WO;
2. ZCEC:MGW=MG1SHLV08,TERMID=11184-
1&&-31,:BA; 3. ZCEC:MGW=MG1SHLV08,TERMID=11184-
1&&-31,:WO;
BSC Integration
![Page 73: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/73.jpg)
ZEDC – Create BSC
ZEDC:TYPE=BSC,NAME=DHARAM,NO=3:::;
BSC Integration
![Page 74: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/74.jpg)
ZELC - CREATE LAC AND ROUTES
ZELC:NAME=DHARAM,LAC=3000:RNAME=BHADDI;
ZEDL:NO=3:NA1,D'304:;
ZEDR:NO=7:23,318,:;
BSC Integration
![Page 75: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/75.jpg)
CREATE AND ADD BTS 1. ZEPC:NAME=JUDIKURDS1,NO=12011:LAC=3000,CI=12011,MCC=405,MNC=754:;
2. ZEPB:NO=12011:BSCNO=3:LAC=3000,:;
3. ZEPS:NO=12011,:U:;
BSC Integration
![Page 76: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/76.jpg)
MSS – MSS/GCS Integration
Configuring IP network in MSC Server
Configuring C7 Signalling in MSC Server
Configuring User Plane Routing and Topology
Creating circuit groups for control plane routing
Creation of digit analysis towards other MSSs
Creation of UPD analysis towards other MSSs
![Page 77: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/77.jpg)
Configuring IP version 4
interface
ZQRN:ISU,1::EL0:10.48.32.40,L,:1500:UP:;
MSS – MSS/GCS Integration
![Page 78: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/78.jpg)
Create default static route
ZQKC:ISU,1:10.48.32.128,25:10.48.73.65:LO
G;
MSS – MSS/GCS Integration
![Page 79: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/79.jpg)
Configuring SCTP
multihoming
ZOYN:ISU,1:IPV4:"10.48.68.100","10.48.76.100";
MSS – MSS/GCS Integration
![Page 80: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/80.jpg)
ZWOI - Check DSCP value in PR File
ZWOI: 53, 9,:;
MSS – MSS/GCS Integration
![Page 81: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/81.jpg)
ZNRP - Configure own signalling of
MSC Server.
MSS – MSS/GCS Integration
![Page 82: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/82.jpg)
ZNPI – Check if BICC service is
defined. Necessary Process Family of BICC is 5C9.
MSS – MSS/GCS Integration
![Page 83: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/83.jpg)
ZOYC - Creation of Association set ZOYC:MSS2:C:M3UA:;
MSS – MSS/GCS Integration
![Page 84: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/84.jpg)
ZOYA – Adding Association to
Association set
ZOYA:MSS2:SIGU,1:SCTP:;
MSS – MSS/GCS Integration
![Page 85: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/85.jpg)
ZOYP – Configuring Association
ZOYP:M3UA:MSS2,0:"10.48.72.164","10.48.80.164",:"10.48
.21.4",25,"10.48.25.4",25,:;
MSS – MSS/GCS Integration
![Page 86: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/86.jpg)
ZOYS – Activating Associations
ZOYS:M3UA:MSS2,0:ACT:;
MSS – MSS/GCS Integration
![Page 87: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/87.jpg)
ZNSP - Create the IP signalling link together
with the signalling link set (used to exchange MTP signalling messages.)
ZNSP:NA1,D„9395,MSS01:0:MSS1:;
MSS – MSS/GCS Integration
![Page 88: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/88.jpg)
ZNRC – Creating Signalling Route& attaching
IP Signalling Link to it.
ZNRC:NA1,D'9395,MSS01,0,D,N:NA1,D'9395,MSS01,7:;
MSS – MSS/GCS Integration
![Page 89: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/89.jpg)
Activate Signalling Link and Signalling Route
Set by ZNLA, ZNLC , ZNVA & ZNVC
MSS – MSS/GCS Integration
![Page 90: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/90.jpg)
Configuring User Plane Routing and Topology
Integrate SS7 configuration.
Create UPDs.
Attach MGWs to UPDs.
![Page 91: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/91.jpg)
SS7 configuration.
Create BICC user part and C7
signalling configuration.
Configuring User Plane Routing and Topology
![Page 92: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/92.jpg)
ZJGI – Interrogate created VMGWs
Configuring User Plane Routing and Topology
![Page 93: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/93.jpg)
UPD Analysis
ZJFC – Creation of UPD
ZJFC:NUPD=UPDIPBB:BNCC=IPV4:NORM=PREP,
EMERG=PREP:STOM=DC,TRUNK=Y,ACHM=0,:D
CODEC=EFR:;
ZJFC:NUPD=UPDAAL2:BNCC=AAL2:NORM=PRE
P,EMERG=PREP:STOM=DC,TRUNK=Y,ACHM=0,:
DCODEC=EFR:;
![Page 94: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/94.jpg)
UPD Analysis
ZJFA – Add VMGWs to UPD ZJFA:UPD=0:MGW=0&&28:LDSH=50:RACC=N,RORIG=Y:;
ZJFA:UPD=1:MGW=0&&28:LDSH=50:RACC=N,RORIG=Y:;
![Page 95: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/95.jpg)
Circuit groups for control plane routing
ZRCC - Create a BICC Circuit group ZRCC:TYPE=BICC,NCGR=BICC1,CGR=2000:DIR=BI,NET=NA1,SPC=3F9,LSI=BICC0
1:METHOD=1,INR=IBIC0,TREE=81,NCCP=INCCPARIMCG0;
![Page 96: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/96.jpg)
ZRCA – Adding CIC to BICC
CGR ZRCA:NCGR=BICC1:CIC=0&&254:UNIT=SIGU,IND
EX=1:;
Circuit groups for control plane
routing
![Page 97: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/97.jpg)
Route for control plane routing
ZRRC – Create Route for
CP routing ZRRC:EXT:ROU=1001,OUTR=OBIC0,STP=1,TON
=NAT,NCCP=BASICOUTPSTNPBX,NCGR=BICC1,
:;
![Page 98: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/98.jpg)
Digit Analysis Towards MSS
![Page 99: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/99.jpg)
PUPD - This phase is executed only if the
incoming signalling is BICC
SBNC - This phase is needed to figure out
bearer technology used towards the
succeeding MGW. This phase is executed
only if the outgoing signalling is BICC
Digit Analysis Towards MSS
![Page 100: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/100.jpg)
CMN - This phase is used to detect whether
an MSS should act as a CMN node. This
phase is executed only if both the incoming
and the outgoing signalling are the same.
SUPD - This phase is executed only if the
outgoing signalling is BICC
Digit Analysis Towards MSS
![Page 101: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/101.jpg)
SAI - This phase is executed only if the
outgoing signalling is BICC.It controls the
used BICC bearer establishment method.
ICBNC - This phase is executed when there
are two MGWs involved in the call in one
MSS area and an interconnection is needed
between the MGWs.
Digit Analysis Towards MSS
![Page 102: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/102.jpg)
ZJUR – Create Final Result ZJUR:PUPDMSS1,PUPD,CONT:PUPD=0;
ZJUR:PUPDDEF,PUPD,STOP:;
ZJUR:PUPDUNK,PUPD,STOP;
ZJUR:SBNCMSS1,SBNC,CONT:SBNC=IPV4;
ZJUR:SBNCDEF,SBNC,STOP:;
ZJUR:SBNCUNK,SBNC,STOP:;
ZJUR:CMNACT,CMN,CONT:CMNI=ACTIVE:;
ZJUR:CMNDEF,CMN,STOP:;
ZJUR:CMNUNK,CMN,STOP:;
Digit Analysis Towards MSS
![Page 103: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/103.jpg)
ZJUR
ZJUR:SUPDMSS1,SUPD,CONT:SUPD=0;
ZJUR:SUPDDEF,SUPD,STOP:;
ZJUR:SUPDUNK,SUPD,STOP;
ZJUR:SAIFORW,SAI,CONT:SAI=FORW;
ZJUR:SAIDEF,SAI,STOP:;
ZJUR:SAIUNK,SAI,STOP;
ZJUR:ICBNCIPB,ICBNC,CONT:ICBNC=IPV4;
ZJUR:ICBNCDEF,ICBNC,STOP:;
ZJUR:ICBNCUNK,ICBNC,STOP;
Digit Analysis Towards MSS
![Page 104: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/104.jpg)
ZJUC - CREATE SUB ANALYSIS
ZJUC:PUPDANA,START,PUPD:PUPDR=3001:RES=PUPDMSS1,DEFRES=PUPDDEF:UNKRES=PUPDUNK:;
ZJUC:SBNCANA,START,SBNC:SUPDR=3001:RES=SBNCMSS1,DEFRES=SBNCDEF:UNKRES=SBNCUNK:;
ZJUC:CMNANA,START,CMN:PUPDR=3001:RES=CMNACT,DEFRES=CMNDEF:UNKRES=CMNUNK:;
ZJUC:SUPDANA,START,SUPD:SUPDR=3001:RES=SUPDMSS1,DEFRES=SUPDDEF:UNKRES=SUPDUNK:;
ZJUC:SAIANA,START,SAI:SBNC=IPV4:RES=SAIFORW,DEFRES=SAIDEF:UNKRES=SAIUNK:;
ZJUC:ICBNCANA,CONT,ICBNC:PSIGT=TRUNK:RES=ICBNCIPB,DEFRES=ICBNDEF:UNKRES=ICBNUNK;
Digit Analysis Towards MSS
![Page 105: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/105.jpg)
ZJUN - Change State of Sub–Analysis
ZJUN:MTN,SAIANA:;
ZJUN:MTN,SUPDANA:;
ZJUN:MTN,CMNANA:;
ZJUN:MTN,SBNCANA:;
ZJUN:MTN,PUPDANA:;
ZJUN:MTN,ICBNCANA:;
Digit Analysis Towards MSS
![Page 106: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/106.jpg)
ZRRM - To bring the control plane direction
component to the user plane analysis.
ZRRM:ROU=1001,UPDR=3001:;
Route for control plane routing
![Page 107: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/107.jpg)
ZRCM – Modifying / Add UPDR data to circuit
group.
ZRCM:CGR=2000::UPDR=3001;
Circuit groups for control plane
routing
![Page 108: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/108.jpg)
ZCRM – Change state of the CGR.
ZCRM:NCGR=BICC1:WO;
Circuit groups for control plane
routing
![Page 109: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/109.jpg)
ZCEC – Change of state of CICs
ZCEC:NAT=NA1,SPC=3F9,CIC=0&&254,:WO:;
Circuit groups for control plane
routing
![Page 110: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/110.jpg)
Route for control plane routing
ZCRC – Change State of Route
ZCRC:ROU=1001:WO;
This Route can then be further used in the
existent sub-destination or a New sub-
destination for further digit analysis and tree
routing.
![Page 111: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/111.jpg)
TDM connectivity with HLR
ZYEF – Check if PCM is OK
ZYEF:ET,258;
![Page 112: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/112.jpg)
ZYEC – Change the frame alignment mode
of ET
ZYEC:ET,258:NORM, CRC4;
TDM connectivity with HLR
![Page 113: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/113.jpg)
ZNCC – Create TDM Signalling Link
ZNCC:36:258-1,64,1,1:CCSU,6:0:;
TDM connectivity with HLR
![Page 114: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/114.jpg)
ZNSC – Attach Signalling link to Signalling
Link Set
ZNSC:NA1,D'191,X3H02:36,0:,:::;
TDM connectivity with HLR
![Page 115: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/115.jpg)
TDM connectivity with HLR
ZNRC – Create Signalling Route Set
ZNRC:NA1,D'191,X3H02,0,D,N:NA1,D'191,X
3H02,7::::;
![Page 116: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/116.jpg)
TDM connectivity with HLR
ZNFD – Create SCCP Signalling point and
Subsystems
ZNFD:NA1,D'191,0:6,MAPH,0,Y:8,MAPM,0,
Y::::;
![Page 117: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/117.jpg)
TDM connectivity with HLR
ZNAC – Create GT translation Result
ZNAC:NET=NA1,DPC=D'191,RI=GT;
![Page 118: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/118.jpg)
TDM connectivity with HLR
ZNBC – Create GT Analysis
ZNBC:::919839000004:3:;
![Page 119: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/119.jpg)
Activation
ZNLA:36:;
ZNLC:36,ACT:;
![Page 120: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/120.jpg)
Activation
ZNVA:NA1,D'191::;
ZNVC:NA1,D'191::ACT:;
![Page 121: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/121.jpg)
Activation
ZNGC:NA1,D'191:ACT:;
ZNHC:NA1,D'191:6:ACT:;
ZNHC:NA1,D'191:8:ACT:;
![Page 122: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/122.jpg)
Configuration of POI
MGW END:
CHANGE ET MODE TO DBLF:
ZYEC:ET,227:NORM,DBLF:;
ZYEC:ET,261:NORM,DBLF:;
![Page 123: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/123.jpg)
Configuration of POI
CREATE LINK:
ZNCN:6:227-16,64:ISU,7:0:;
ZNCN:6:228-16,64:ISU,8:0:;
![Page 124: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/124.jpg)
Configuration of POI
CREATE LINKSET:
ZNSC:NA0,D'9544,ZCM00:6,0:7,1:::;
![Page 125: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/125.jpg)
Configuration of POI
CREATE ROUTESET:
ZNRC:NA0,D'9544,ZCM00,0,D,N:,,,7::::;
![Page 126: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/126.jpg)
Configuration of POI
ADD AOPC(MSS POINT CODE)
ZNRB:NA0,D'9544:AOPC=D'5244:;
![Page 127: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/127.jpg)
Configuration of POI
ALLOW LINK & ROUTESET,THEN
ACTIVATE:
ZNLA:6:;
ZNLC:6,ACT:;
ZNVA:NA0,D'9544:NA0,D'9544:;
ZNVC:NA0,D'9544:NA0,D'9544:ACT:;
![Page 128: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/128.jpg)
Configuration of POI
CRAETE CIRCUIT GROUP:
ZRCC:TYPE=SPE,CGR=1801,NCGR=ICCI0
0:USE=VMGW:;
![Page 129: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/129.jpg)
Configuration of POI
ADD CIRCUITS TO CIRCUIT GROUP:
ZRCA:CGR=1801:CRCT=227-1&&-15&-
17&&-31:;
ZRCA:CGR=1801:CRCT=261-1&&-15&-
17&&-31:;
![Page 130: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/130.jpg)
Configuration of POI
ADD CRICUIT GROUP TO VIRTUAL MGW:
ZJVE:VMN=MG1SHLV07,:CGR=1801,:;
![Page 131: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/131.jpg)
Configuration of POI
UNBLOCK CIRCUIT GROUP & CIRCUITS:
ZCIM:CGR=1801:WO;
ZCIM:CRCT=227-1&&-15&-17&&-31:WO;
ZCIM:CRCT=227-1&&-15&-17&&-31:WO;
![Page 132: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/132.jpg)
Configuration of POI
MSS END:
CREATE ROUTESET VIA MGW:
ZNRC:NA0,D'9544,ZCM00:NA0,D'1100,MG1
SH,7:;
![Page 133: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/133.jpg)
Configuration of POI
ALLOW & ACTIVATE ROUTESET:
ZNVA:NA0,D'9544:NA0,D'1100:;
ZNVC:NA0,D'9544:NA0,D'1100:ACT:;
![Page 134: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/134.jpg)
Configuration of POI
CREATE CIRCUIT GROUP:
ZRCC:TYPE=ECCS,NCGR=ICCI00,CGR=18
01:DIR=BI,NET=NA0,SPC=D'9544,LSI=IU4N
I,IFAC=5,
UPART=4:METHOD=1,INR=INIK4,TREE=70
,NCCP=BASICINPSTNPBX,MGW=MG1SHL
V07:;
![Page 135: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/135.jpg)
Configuration of POI
CHANGE STATE OF CIRCUIT GROUP:
ZCRM:NCGR=ICCI00:WO;
![Page 136: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/136.jpg)
Configuration of POI
ADD CIRCUITS TO CIRCUIT GROUP:
ZRCA:CGR=1801:TERMID=227-1&&-
15,:CIC=1,CICDIR=0,::UNIT=SIGU,INDEX=5:;
ZRCA:CGR=1801:TERMID=227-17&&-
31,:CIC=17,CICDIR=0,::UNIT=SIGU,INDEX=5:;
ZRCA:CGR=1801:TERMID=261-1&&-
15,:CIC=33,CICDIR=0,::UNIT=SIGU,INDEX=6:;
ZRCA:CGR=1801:TERMID=261-17&&-
31,:CIC=49,CICDIR=0,::UNIT=SIGU,INDEX=6:;
![Page 137: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/137.jpg)
Configuration of POI
CHANGE STATE OF CIRCUITS:
ZCEC:TERMID=227-1&&-15&-17&&-31,MGW=MG1SHLV07,:SE;
ZCEC:TERMID=227-1&&-15&-17&&-31,MGW=MG1SHLV07,:WO;
ZCEC:TERMID=261-1&&-15&-17&&-31,MGW=MG1SHLV07,:SE;
ZCEC:TERMID=261-1&&-15&-17&&-31,MGW=MG1SHLV07,:WO;
![Page 138: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/138.jpg)
Configuration of POI
CREATE ROUTE:
ZRRC:EXT:ROU=2002,OUTR=ONIK5,NCCP
=BASICOUTPSTNPBX,STP=1,TON=NOE,N
CGR=ICCI00,:;
![Page 139: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/139.jpg)
Configuration of POI
CREATE SUBDESTINATION AND
DESTINATION:
ZRDE:NSDEST=NSHARC00:ROU=2002,SP
=10,CT=NC,:;
ZRDE:NDEST=DAIRCSH0,:NSDEST=NSHA
RC00,:NCHA=CHARGE,:;
![Page 140: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/140.jpg)
Configuration of POI
NUMBER DEFINATION:
ZRDC:DIG=98570&&-4,TREE=2,
TON=NAT,:NDEST=DAIRCSH0,:;
![Page 141: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/141.jpg)
IP configuration
SCTP Multi-homing (not mandatory for 1st Call)
Own Signalling Point Data.
License Installation & Feature Activation
Default Parameters
PR File
FI File
Configuration for 1st Call
![Page 142: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/142.jpg)
Configuration for First Call
Signalling Parameters
SS7 Signalling Link Set Parameter
SS7 Signalling Route Set Parameters
SCCP Parameter Set
SS7 Level 3 Parameters
MAP Parameters
![Page 143: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/143.jpg)
Configuration for First Call
Network Element Specific Parameter
VLR Parameters
PLMN Parameters
MSC Number Range
Network & NE Specific Numbers
MSC Specific Numbers
![Page 144: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/144.jpg)
Configuration for First Call
SS7 services
SCTP Parameter set
Pre-analysis
Routing Attribute Sub-Analysis & Final Result
End of Selection
BSSAP Parameters
![Page 145: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/145.jpg)
Configuration for First Call
Call Control Parameters
SPRs
GSMEND
HLRENQ
HANDOVER (not mandatory for 1st Call)
IMSI analysis
![Page 146: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/146.jpg)
Configuration in MGW
IP configuration
Own Signalling Point Data.
Default Parameters
PR File
FI File
SS7 services
![Page 147: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/147.jpg)
Configuration in MGW
Signalling Parameters
SS7 Signalling Link Set Parameter
SS7 Signalling Route Set Parameters
SCCP Parameter Set
SS7 Level 3 Parameters
SCTP Parameters
![Page 148: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/148.jpg)
Configuration in MGW
License Installation & Feature activation
MGW Specific Default Parameter
DSP parameter & Capacity handling
![Page 149: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/149.jpg)
Integration of MGW with MSS.
Integration of HLR with MSS.
Integration of BSC with MSS & MGW.
![Page 150: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/150.jpg)
Digit Analysis
![Page 151: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/151.jpg)
IP Configuration
IP configuration – Configuring MSS for its connectivity with other IP based network elements.
ESB configuration : Define Ethernet interfaces.
ZQRN : Define IP addresses for all the required signalling units from which coonectivity is required
ZQRT : define TCP/IP parameters for signalling
![Page 152: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/152.jpg)
IP Configuration
ZQKC : Define Static Route. It is required for all
different networks in order to correctly route
outgoing IP packets to the configured destination.
![Page 153: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/153.jpg)
SCTP Multi-homing
ZOYN : The SCTP multi-homing should be used
to increase the redundancy of the M3UA and
H.248 protocols that use the SCTP.
![Page 154: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/154.jpg)
Defining Own specific Data
Own Signalling Point
The own signalling point has to be defined
before we can create the other objects of the
signalling network.
ZNRP:NA1,D‟11563,MSS81,STP:ITU-T::;
ZNRP:NA1,D‟9588,MSS80,STP:ITU-T::;
![Page 155: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/155.jpg)
PR FILE
PR File - General Parameter File
The parameters are organized into parameter
classes each of which represents a specific
functional area.
ZWOC:3,009,5E;
![Page 156: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/156.jpg)
FE FILE
FI file – Feature Information Control File
The featured parameter is not visible if
feature for respective parameter is not
activated for the customer.
ZWOA:1,98,A;
![Page 157: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/157.jpg)
MTP implementation
Signalling Link Parameters
SS7 Signalling Link Set Parameter
The parameters in the signalling link
parameter set define the function of the
signalling link. Each signalling link uses the
signalling link parameter set attached to it.
ZNOI;
![Page 158: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/158.jpg)
MTP implementation
Route set Parameters
SS7 Signalling Route Set Parameters
The parameters in the signalling route set
parameter set define the signalling route set
signalling functions. Each signalling route
set uses a signalling route set parameter
set attached to it.
ZNNI;
![Page 159: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/159.jpg)
Defining SCCP
SCCP Parameter Set
SCCP signalling point parameter set define the SCCP signalling parameters for certain timers that are used in monitoring the signalling connections, and for managing the subsystems of the own SCCP signalling point and the SCCP signalling functions towards remote SCCP signalling points.
ZOCI;
ZOCJ;
![Page 160: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/160.jpg)
Defining SS7 parameters
SS7 Level 3 Parameters
MTP level 3 signalling parameters define the
functions of the whole MTP of the network
element. Some of the parameter values are
related to monitoring the functions, while others
define various limits and timers.
ZNMI;
![Page 161: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/161.jpg)
Defining MAP parameters
MAP Parameters
It defines the SCCP return option, the
overload control, the standard of the TCAP,
SCCP address, object identifier and the
number of authentication sets used in
different MAP versions.
ZOPM:TCAP=ANSI,OBID=ANSI,ADDR=ANSI;
ZOPH:MODIFY:AC=5,AMWL=NO:VER=3;
![Page 162: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/162.jpg)
Defining VLR parameters
VLR Parameter - The VLR parameters are
used to control certain functionality in the
VLR like
General VLR operations (VLR cleaning, triplet/quintet record
and deregistration)
Security operations (The use of authentication and IMEI checking)
The use of TMSI paging and searching
![Page 163: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/163.jpg)
Defining VLR parameters
The support of supplementary services, teleservices, and bearer services
Network Identity & Time Zone parameters
Default access right reject cause codes
The VLR-specific parameters are general
parameters of the VLR, meaning that they do
not depend on the subscriber's HPLMN
![Page 164: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/164.jpg)
Defining PLMN parameters
The PLMN-specific parameters control VLR
functions which depend on the subscriber's HPLMN.
Roaming status
IMEI checking parameters
TMSI allocation parameters
Authentication and ciphering parameters
Advice of Charge parameters
![Page 165: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/165.jpg)
Defining PLMN parameters
Equal Access parameters
Intelligent Network parameters
NITZ parameters
Inter-PLMN handover agreement list
Equivalent PLMN list
Default access right reject cause codes
Access rights to GSM/UMTS radio network
![Page 166: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/166.jpg)
Defining MSRN & Handover Number
range (MSC specific)
MSC Number Range
We need to define number range for MSRN allocation and Inter MSC Handover.
These number ranges are unique for every MSS.
ZWVC:MSRN=919732898000&&919732898999:RNGP=0:;
ZWVC:HON=9733298400&&9733298599:TON=NAT;
![Page 167: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/167.jpg)
Network & NE Specific Numbers
Network & NE Specific Numbers –
Define numbers that specify a particular network or network element.
Own network code : numbering plan
International prefix : type of prefix
National prefix : type of prefix
ZWWS:CC=91:NP=E164;
ZWWS:NDC=9732:NP=E164;
ZWWS:IPRE=00;
![Page 168: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/168.jpg)
MSC Specific Numbers
MSC Specific Numbers – Define Network
and MSC specific numbers important for
proper identification globally.
ZWVS:MCC=405;
ZWVS:MNC=67;
ZWVS:MSC=919733000009:NP=E164,TON=NAT;
![Page 169: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/169.jpg)
Defining SS7 services
SS7 services – To create user parts for
MTP which uses services of MTP in SS7 for
example BICC , SCCP etc
ZNPC:NA0,03,SCCP:Y:Y,10E,10F:;
![Page 170: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/170.jpg)
Defining SCTP parameters
SCTP Parameter Sets –It control how the
SCTP association is working And should be
uniform at both ends of the SCTP
association. If the SCTP parameters are
different between peers, the value of the
SCTP parameters should be harmonized in
both ends
ZOYO;
![Page 171: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/171.jpg)
Digit Analysis - Preanalysis
Preanalysis –
To examine the numbers being dialled in order to establish the type of call being made.
To identify a service, service group or emergency call.
To send dialled digits modification instructions on how to remove or add dialled digits.
![Page 172: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/172.jpg)
Digit Analysis - Preanalysis
To analyse the nature of the dialled digits and change it to the “characteristics of number”.
Identify local calls (add local area code).
Recognise a certain dialling pattern (prefix) from the MS in order to proceed routing based on calling line identity (CLI).
Recognise prefixes for CLI presentation (whether the CLI is presented to Subscriber B or not)
![Page 173: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/173.jpg)
Number of removed digit
Characteristic of number
Numbering Plan
Call Characteristic
Result Identifier
Numbering Plan
Type Of Number
Dialled Digits
011 2345678
UNKNOWN
E.164 (ISDN/Telephony
Continue call setup
Normal call
E.164 (ISDN/Telephony)
National
1
Digit after pre-analysis = 11 2345678
Dialling Preanalysis
Number Dialled:
050 1234567
Example of Dialling Pre-analysis Input
and Output Parameters
![Page 174: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/174.jpg)
Routing Attribute Sub-Analysis & Final
Result
Routing attribute analysis –
Tree to be used for different calls depending
on the attributes associated with them.
Intermediate announcement to calling (or
redirecting) subscriber with a Chargeable /
free announcement indication.
![Page 175: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/175.jpg)
Routing Attribute Sub-Analysis & Final
Result
Routing attribute analyses are made before the CM
digit analysis at points where the called or redirected
number is brought to the digit analysis
They are not made for roaming or handover
numbers and after number modification has been
done.
The default result is that the analysis does not
change the digit analysis tree and There is no
announcement for the subscriber
![Page 176: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/176.jpg)
Routing Attribute Sub-Analysis & Final
Result
TypeUnitOrDepartmentHereTypeYourNameHere
Digit
analysis treeIntermediate
annoucement
Attributes
Digitanalysis
Routing Attributeanalysis
Destination
Hello
![Page 177: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/177.jpg)
End Of Selection (EOS)
End Of Analysis –
Examines the clear code, after which the call
may be disconnected, reanalysed, or lead to
an alternative destination, depending on the
incoming signalling and the given control
codes.
![Page 178: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/178.jpg)
End Of Selection (EOS)
It is used when the call attempt fails before
the conversation state is achieved.
The EOS analysis contains the control
information for giving the right response to
each individual clear code.
ZRXI:RESGR=0;
![Page 179: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/179.jpg)
BSSAP Parameter
BSSAP Parameter –
An MSC contains 50 pre-packaged BSSAP
service profile descriptions, which define the
data combinations of BSS functions and
values of A-interface timers and parameters.
![Page 180: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/180.jpg)
BSSAP Parameter
ZEDT – To modify BSSAP parameters
ZEDT:VER=9:F,3,1;
![Page 181: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/181.jpg)
Call Control Parameter
Call Control Parameters
We define circuit group and route-specific
data used by call control programs. One
outgoing parameter set and one incoming set
must be defined per each route/circuit group.
IN Call Parameters
OUT Call Parameters
![Page 182: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/182.jpg)
Call Control Parameter
Call Control Parameters Handling - Define
parameters concerning messages, call
forwarding, announcements, handling of free
calls, handling of CLI ,handling of PSTN
related calls ,Voice Processing System calls
,etc
![Page 183: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/183.jpg)
Call Control Parameter
To create a parameter set which is used for
routing administration on the incoming
circuits.
ZCPC:EXTIP:RESGR=3::ASKCLI=Y;
![Page 184: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/184.jpg)
Call Control Parameter
To create a parameter set which is used for
routing administration on the out going
circuits.
ZCPJ:HANDOVER:IIDCLI=Y;
![Page 185: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/185.jpg)
SPRs
SPR - SPR instructs the exchange to retain
the call in the MSC because some other
actions need to be done to the call before it
can be routed out
![Page 186: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/186.jpg)
SPRs
The SPRs used are:
· HLRENQ SPR
· GSMEND SPR
· SPR with inter-MSC handover
· Number modification SPR
· Announcement SPR
· SPR with data call; the call must pass through the modem pool before being routed out of the exchange
· SPR with an IN call
![Page 187: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/187.jpg)
SPR - HLRENQ
During every MTC, an HLRENQ must be
performed to find out the MSC where the
subscriber is located at the moment.
![Page 188: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/188.jpg)
SPR - HLRENQ
Signalling messages from the MSC to the
HLR can be routed using the two main
principles:
· routing on label
· routing on Global Title (SCCP routing).
![Page 189: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/189.jpg)
SPR - HLRENQ
HLRENQ routed on label
The definition for the SPR HLRENQ must
contain the signalling point code from the
HLR
HLRENQ routed on Global Title
It is the most flexible and elegant way of
routing HLRENQs to the HLRs. Only one
SPR for HLRENQ,
![Page 190: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/190.jpg)
SPR - HLRENQ
ZRPR:STP=1,SPR=3,DIG=919732000007,TON=INT,NP=E164,:;
ZRPR:STP=1,SPR=4,DIG=919733000007,TON=INT,NP=E164,:;
ZRPR:STP=1,SPR=5,DIG=919732000017,TON=INT,NP=E164,:;
![Page 191: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/191.jpg)
SPR - GSMEND
GSMEND SPR – Mobile Terminating Call
For a mobile-terminated call, the MSC
receives its own MSRN back from the Trunk /
HLR after HLRENQ which is then further
analyzed in respective tree and the call is
routed and terminated using GSMEND.
![Page 192: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/192.jpg)
SPR - GSMEND
ZRPE
ZRPE:OUTR=OMCG0,STP=1,SPR=1:;
![Page 193: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/193.jpg)
IMSI Analysis
IMSI Analysis –
It is defined in all VMSCs in the visited PLMN
area.
The MCC and MNC parts of IMSI are used to
derive the correct PLMN.
Usually the first two digits of the Mobile
Subscriber Identification Number (MSIN) are used
to indicate the HLR within the subscriber's PLMN.
![Page 194: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/194.jpg)
IMSI Analysis
ZCFC – Create IMSI Analysis
ZCFC:IMSI=405750,IMSIINDIC=120,PLMN=VODAFONE_JK,TOA=GT,
:TON=INT,NP=E214,SRD=1,NRD=5,SAD=1,DIA=919796;
![Page 195: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/195.jpg)
Configuration for DATA call
ZQKC - Create Static route for CDS
ZQKC:ISU,3:10.40.20.0,25:10.48.89.1:LOG:;
![Page 196: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/196.jpg)
Configuration for DATA call
ZQRX – After creation of static route do
check if used ISU is able to ping the network
IP of CDS.
Until and unless the units doesn‟t ping IWF
resources created won‟t get registered.
![Page 197: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/197.jpg)
Configuration for DATA call
ZRCC – Creation of CGR for CDS
ZRCC:TYPE=SPE,NCGR=MZWB71,CGR=810:USE=VMGW:;
![Page 198: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/198.jpg)
Configuration for DATA call
ZRCA – Adding circuits to CGR
ZRCA:CGR=810:CRCT=1774-1&&-31:;
![Page 199: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/199.jpg)
Configuration for DATA call
ZJCH – To define own ISU specific IP address for
TCP/IP and the current IWF/CDS resources
hunting method.
ZJCH:UINX=3,OIP="10.48.73.6",HUNT=1:;
MGW IPA2800 2009-09-15 15:50:25
UNIT DATA:
ISU UNIT ID : 3
OWN ADDRESS : 010.048.073.006
HUNTING METHOD : PRIORITY
=========================================
COMMAND EXECUTED
![Page 200: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/200.jpg)
Configuration for DATA call
ZJCA - To add an IWF priority entry.
ZJCA:UINX=3,PRIO=1:TTY=1:PIP="10.48.20.5",P
PORT=8014,NENAME=M7G1V05,:;
![Page 201: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/201.jpg)
Configuration for DATA call
ZJCI:UINX=3,;
MGW IPA2800 2009-09-15 16:53:44
IWF PRIORITY LIST:
ISU UNIT ID : 3
OWN ADDRESS : 010.048.073.006
HUNTING METHOD : PRIORITY
=========================================
PRIORITY : 1
NE NAME : M7G1V05
TRANSPORT TYPE : TCP
PRIM IWF ADDR : 010.048.020.005
PRIM IWF PORT : 8014
SEC IWF ADDR : -
SEC IWF PORT : -
PARAMETER SET : -
REG STATUS : REGISTERED
USED ADDR : 010.048.020.005
--------------------------------
AVAIL CONG USED IWF RESOURCES
------ ---- ------------------
YES NO 50
COMMAND EXECUTED
![Page 202: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/202.jpg)
Configuration for DATA call
ZJCM – To modify IWF connection status
ZJCM:UINX=3,PRIO=1,CONN=0:;
![Page 203: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/203.jpg)
Configuration for DATA call
ZJVE – Adding CGR to VMGW
ZJVE:VID=4,:CGR=810,:;
![Page 204: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/204.jpg)
Configuration for DATA call
ZCIM – Activating CGR
ZCIM:CGR=810:WO:;
![Page 205: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/205.jpg)
Configuration for DATA call
ZCIM – Activating Circuits towards CDS
ZCIM:CRCT=1774-1&&-31:WO:;
![Page 206: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/206.jpg)
Configuration for Location Update
The following configurations are required to be done in MSS for Location Update
SS7 services
IMSI analysis
MAP Parameters
Home PLMN Parameters
Integration with HLR
Integration with BSC/BTS.
![Page 207: 65420776 NSN Core Complete Integration](https://reader036.vdocument.in/reader036/viewer/2022082208/55cf9a63550346d033a17e71/html5/thumbnails/207.jpg)