6th june 2010 (sunday) - sps utm2.00 pm state of the environment and policies in malaysia – dr....

PROGRAM TENTATIVE

6th

June 2010 (Sunday)

TIME AGENDA VENUE/ REPRESENTATIVE

08.00 pm Briefing for DTU Students Venue : Perdana College (opposite Scholar’s Inn) (Seminar Room, Perdana College) (see Page 20) By Dr M. Al-Muz-zammil Yasin (School of Graduate Studies, UTM)

Notes:

1. Refreshments will be provided.

7th

June 2010 (Monday)


08.30 am Registration Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG)

09.00 am Opening Ceremony Emcee : Dr.Zainura/ Dr. Sharifah (Faculty of Chemical & Natural Resources Engineering, UTM)

10.00 am Morning break Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG)

10.30 am Global product chains, growth and development – Arne Wangel (DTU)

Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG) By Assoc. Prof. Arne Wangel (Denmark Technical Univesity)

11.30 am Presentation of course program, case studies, companies, staff and participants – Problem – oriented project based learning (POPBL): Why and how? – Arne Wangel (DTU)

12.30 pm Lunch break Venue : Centre Point Café & Meranti Food Court (see Page 20)

2.00 pm State of the environment and policies in Malaysia – Dr. Zulkifli Abd Rahman (DOE)

Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG) By Dr. Zulkifli Abd Rahman (DOE) (Director of Environmental Department, Johor)

3.00 pm Roundtable Discussion on Joint Research and Education for Sustainable Production Panel: Prof. Dr. Rahmalan Ahmad, Dr. Zulkifli Abd Rahman (DOE), Prof Dr Ir. Wahid Omar, Dr. Ralph Rosenbaum (DTU)

Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG)

5.00 pm Tea break ( for VIP only) Venue : C04, Level 2, Fotogrammetri Lab, FKSG Notes :

1. Only Morning Break will be provided for participants

2. Transport will be provided for DTU participants at 8:00 am (in front of Scholar’s Inn Guesthouse) and

6:00 pm (at C04, FKSG).

3. FKSG (Faculty of Geoinformation Science and Engineering).

8th

June 2010 (Tuesday)


09.00 am The concept of sustainability Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG) By Dr Ralph Rosenbaum (Faculty of Chemical & Natural Resources Engineering, UTM)

10.00 am Morning break Venue : Centre Point Café & Meranti Food Court (see 0)

10.15 am Environmental impacts, causes, effects, and consequences – What do we know, what do we fear, what do we do Dr. Ralph Rosenbaum, DTU

Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG) By Dr. Ralph Rosenbaum (Denmark Technical Univesity)

12.30 pm Lunch Venue : Centre Point Café & Meranti Food Court (see Page 20)

2.00 pm Tools for sustainable consumption: Eco-labels, green procurement, incentive policies, etc


3.00 pm Tea break Venue : Centre Point Café & Meranti Food Court (see Page 20)

3.15 pm Eco-efficiency – Responsibility and tasks of the environmental engineer.


Notes :

1. Meals are not provided.


6:00 pm (at C04, FKSG).


Page 2

9th

June 2010 (Wednesday)


09.00 am Management of chemicals, finding data, technical and organizational constrains, case studies from Malaysia

Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG) By Prof. Dr. Wan Azelee bin Wan Abu Bakar (Faculty of Science, UTM)

10.00 am Morning break Venue : Centre Point Café & Meranti Food Court (see Page 20)

10.15 am Managing waste in industry: Zero emission concepts – Assoc. Prof. Dr. Mohd Rozainee Taib (UTM)

Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG) By Assoc. Prof. Dr. Mohd. Rozainee Taib (Faculty of Chemical & Natural Resources Engineering, UTM)

11.15 am Experience in improving environmental performance in Malaysian industry – Assoc. Prof. Dr. Mohd Rozainee Taib (UTM)

Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG) By Assoc. Prof. Dr. Mohd. Rozainee Taib (Faculty of Chemical & Natural Resources Engineering, UTM)

12.30 pm Lunch Venue : Centre Point Café & Meranti Food Court (see Page 20)

2.00 pm Tools for sustainable production: Life Cycle Assessment, Ecodesign. Environmental Management, etc


3.00 pm Introduction:

Life Cycle thinking and concepts

LCA as an environmental assessment tool

Principle of LCA

LCA process

Applications of LCA Limits of LCA



4.15 pm Tools in Malaysian industry for managing water and energy consumption, and waste and waste water effluent at levels of production, process, and input/output/from nature – Dr. Haslenda Hashim (UTM)

Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG) By Dr. Haslenda Hashim (Faculty of Chemical & Natural Resources Engineering, UTM)

Notes :



6:00 pm (at C04, FKSG).


10th

June 2010 (Thursday)


09.00 am Assessment of chemicals – Legal regulation, risk perception, precautionary principle – Prof. Dr. Arshad Ahmad (UTM)

Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG) By Prof. Dr. Arshad Ahmad (Faculty of Chemical & Natural Resources Engineering, UTM)


10.15 am Goal and scope definition

Goal

Function, functional unit, and reference flow + exercise

Product system boundaries Inventory data requirements

Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG) By (to be confirmed)

12.30 am Lunch Venue : Centre Point Café & Meranti Food Court (see Page 20)

2.00 pm Life cycle inventory:

Exercise: Carbon budget of a light bulb Life cycle impact assessment

Introduction

Principles, concepts, and definitions

Example of how to establish a characterization method

LCIA in practice



4.15 pm Interpreting the life circle

Results for the light bulbs

Completeness, sensitivity, and consistency checks

Critical review Simplified LCA tools


Notes :



6:00 pm (at C04, FKSG).


11th

June 2010 (Friday)


09.00 am Goal and scope definition

Aspects to consider when defining the boundaries of a system

Attributional and consequential approaches

Life cycle inventory

Multifunctional processes



10.15 am Life cycle impact assessment (LCIA)

LCIA framework

LCIA steps: classification, characterization, normalization, and weighting

Key points and limitations

LCIA methods


12.30 am Lunch break Venue : Centre Point Café & Meranti Food Court (see Page 20)

2.00 pm Workshop: Resolving an LCA (group work)

Function, functional unit, system boundaries



4.00 pm Workshop: Resolving an LCA (group work)

Presenting the results LCA Software tools (commercial and open access) Summary of key points of LCA


4.15 pm Group planning Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG)

Notes :



6:00 pm (at C04, FKSG).


12th

June 2010 (Saturday)

(Trip to Endau Rompin)

TIME AGENDA VENUE

08.00 am Off to Endau-Rompin (Peta) Johor National Park

Venue : Taman Negara Johor Endau-

Rompin (Peta),

Endau-Rompin (Peta) Johor National

Park

Tkt Bawah, No.11,

Jalan Bawal 1, Taman Kahang Baru

86700 Kahang

Kluang, Johor

11.00 am Arrival in Endau-Rompin (Peta) Johor National Park

Notes :

1. Transport will be provided for UTM-DTU participants at 7:00 am (in front of Scholar’s Inn Guesthouse).

13th

June 2010 (Sunday)

(Trip to Endau Rompin)

TIME AGENDA VENUE

07.00 pm Off to UTM Johor Bahru

Venue : Sholar’s Inn, Guesthouse U9,

UTM Johor Bahru

10.00 pm Arrival in Scholar’s Inn (Guesthouse U9), UTM Johor Bahru

14th

– 17th

June 2010 (Monday - Thursday)


09.00 am Group work on selected case studies, supervised by Malaysian and European faculty Malaysia Faculty Supervisors:

Prof Dr Nor Aishah Saidina Amin, FKKKSA

Assoc. Prof Dr Ariffin Abu Hassan, FKKKSA

Dr. Zainura Zainon Noor, IPASSA

Dr. Sharifah Rafidah Wan Alwi FKKKSA,

Dr. Mohd Fadhil FKKKSA

Dr. Khalida Muda, FKA European Faculty Supervisors:

Dr. Ralph K. Rosenbaum, DTU

Dr. Arne Wangel, DTU

Venue : Selected Site (will be informed later)

10.00 am Morning break

10.15 am Group work on selected case studies continued Venue : Selected Site (will be informed later)

12.30 pm Lunch Notes :


3. Transport will be provided on 14th

June only.

14th

June (Monday)

(Industrial Visit 1 & 2)

TIME AGENDA VENUE

07.00 am Off to Steelcase LEED, Kuala Lumpur

Venue : Steelcase LEED

Suite 26.01 & 27.01, Level 26 & 27,

The Gardens South Tower, Mid Valley City, Lingkaran Syed Putra, 59200

Kuala Lumpur

11.00 am Arrival in Garden Shared Service Centre at Mid Valley City, Kuala Lumpur

11.10 am – 12.30 noon

Steelcase LEED office space tour

12.30 noon – 1.30 pm

Lunch

1.45 pm

Off to Steelcase Manufacturing (M) (SMM) at Puchong.

Venue : Steelcase Manufacturing (Malaysia)

Sdn Bhd (SMM)

17, Jalan Puchong 22Km,

47100 Puchong 2.20 pm Arrival in Steelcase Manufacturing (M) (SMM) at Puchong.

2.30 pm – 3.00 pm

Introduction of both SMM and UTM/DTU team. SMM to present sustainablility effort on the manufacturing floor.

3.00 pm – 4.00 pm

Manufacturing floor tour lead by SMM team.

4.00 pm – 5.30 pm

Presentation on 3 small research project by UTM/DTU student to SMM engiinering/sourcing and PD&L Engineering

5.30 pm – 6.00 pm

Q&A

6.00 pm Off to Johor Bahru Scholar’s Inn (Guesthouse U9), UTM Johor Bahru

Notes :


5. Transport for site visit will be provided on 14th

- 15June only.

15th

June (Tuesday)

(Industrial Visit 3 & 4)

TIME AGENDA VENUE

08.00 am Off to Felda Oil Products, Pasir Gudang

Venue : Felda Oil Products Sdn. Bhd.

Lot 82, Jalan Besi 2,

81700 Pasir Gudang

9.00 am Arrival in Felda Oil Products, Pasir Gudang

Introduction of Felda Oil Products Co.

Floor Tour

Q&A

12.00 noon – 1.30 pm

Lunch

1.45 pm

Off to Mensilin Holdings (Main Plant), Pasir Gudang

Venue : Mensilin Holdings Sdn. Bhd,

(Main Plant),

PLO 481, Jalan Besi,

Kawasan Perindustrian Pasir Gudang,

81700 Pasir Gudang

1.55 pm Arrival in Mensilin Holdings (Main Plant), Pasir Gudang

Intorduction of Mensilin Holdings Co.

Floor tour

Q&A

6.00 pm Off to UTM Johor Bahru Scholar’s Inn (Guesthouse U9), UTM Johor Bahru

Notes :



- 15June only.

15th

June (Tuesday)

(Industrial Visit 5)

TIME AGENDA VENUE

08.00 am Off to PPNJ Kahang Palm Oil Mil, Kluang

Venue : PPNJ Kahang Palm Oil Mil

Kilang Kelapa Sawit Kahang,

Peti Surat 26, 86700 Kahang,

Kluang

10.00 am Arrival in PPNJ Kahang Palm Oil Mil, Kluang

Introduction of Felda Oil Products Co.

Floor Tour

Q&A

12:00 noon – 1:30 pm

Lunch

1.45 pm Site visit in PPNJ Kahang Palm Oil Mil, Kluang (continued)

Venue : PPNJ Kahang Palm Oil Mil

Kilang Kelapa Sawit Kahang,

Peti Surat 26,

86700 Kahang, Kluang

6:00 pm Off to UTM Johor Bahru Scholar’s Inn (Guesthouse U9), UTM Johor Bahru

Notes :

1. Transport will be provided for UTM-DTU participants at 7:00 am (in front of Scholar’s Inn Guesthouse)


- 15June only.

17th



09.00 am Potential for improving sustainability in the palm oil industry and key issues in the discussion on bio-diesel,

- Mr. Sune Balle Hansen, DTU/UTM



10.15 am The experience of Clean Development Mechanism (CDM) projects in the palm oil industry,

- Mr. Ulrish Elmer Hansen, Risoe DTU


11.00 am Presentation of synopsis of case study report by each group



2.00 pm Presentation of synopsis of case study report by each group continued


3.00 pm Feedback from the supervisors Groupwork


Notes :



6:00 pm (at C04, FKSG).


18th

– 23rd

June 2010 (Friday - Wednesday)


Group work on selected case studies, supervised by Malaysian and European faculty - continued

Venue : Selected Site (to be confirmed)

Notes :


24th



09.00 am Group submit their project reports to opponent groups and supervisors.


09.45 am Guidelines for critical review projects reports – Arne Wangel & Ralph Rosenbaum (DTU)

Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG) By Arne Wangel & Dr. Ralp Rosenbaum (Denmark Technical Univesity)

10.45 am Preparation for presentation of group reports and opponent intervention for other group report


4.00 pm Tea break & End of program Venue : Centre Point Café & Meranti Food Court

Notes :



6:00 pm (at C04, FKSG).


25th

June 2010 (Friday)


09.00 am Evaluation seminar Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG)

10.00 am Morning break Venue : C04, Fotogrammetri Lab,FKSG

10.15 am Evaluation seminar – continued Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG)


2.45 pm Evaluation seminar – continued Venue : C04-210-01-BK6 (Lecture Room 6, Block C04, Level 2, FKSG)

3.45 pm Closing ceremony – handing over souvenir)


8:00 pm Dinner at UTM Tropical Lake (* Food & Beverages will be provided by International Student Centre and Office of International Affairs UTM)

Venue: UTM Tropical Lake * Transport : UTM Bus

Notes :

1. Meals for morning break and lunch are not provided.

2. Transport will be provided for DTU participants at 8:00 am (in front of Scholar’s Inn

Guesthouse) and

6:00 pm (at C04, FKSG).

3. Transport will also be provided for Dinner at 7:30 pm – 8:00 pm (in front of Scholar’s

Inn Guesthouse) and 11:30 pm at UTM Tropika Lake.

FKSG (Faculty of Geoinformation Science and Engineering)

6th june 2010 (sunday) - sps utm2.00 pm state of the environment and policies in malaysia – dr....

Documents