7 3inch full screen display rearview mirror standard version

10
Designed in Grand Rapids MI, USA Assembled in China Car Rear View Mirror Monitor with 7.3 Inch Wide LCD Display Screen User manual FK-073A ECE R 10 Approval No.: 10R-03 12762 ECE R 46 Approval No.: 46R-04 0019

Upload: nearhi-liu

Post on 23-Jul-2016

222 views

Category:

Documents


1 download

DESCRIPTION

 

TRANSCRIPT

Page 1: 7 3inch full screen display rearview mirror standard version

Designed in Grand Rapids MI, USA Assembled in China

Car Rear View Mirror Monitor with 7.3 Inch Wide LCD Display Screen

User manualFK-073A

ECE�R�10Approval No.: 10R-03 12762

ECE�R�46Approval No.: 46R-04 0019

Page 2: 7 3inch full screen display rearview mirror standard version

Welcome to use our Car Rear view mirror monitor with 7.3 inch wide LCD display

screen.

●We reserve the final explanation right on this User's Manual.

●Specifications are subject to change without notice. Sorry for any inconvenience

caused!

●Please make a copy of the important data. We assume no responsibility for the

data loss.

●This manual has been carefully checked. Please contact our service center when

any typing mistake is found.

●Please read the operating instruction carefully and use the accessories only

provided by the original factory to avoid any unexpected damage. No warranty

will be executed if you are not following the instruction or connecting with the

incompatible accessories, we assume no responsibility for any loss and damage

caused hereby.

●Any discrepancy between the pictures with real products hereinafter, the real

one prevails.

●The working voltage of this model is 10V to 30V, and it can be installed in the

truck if its voltage is 24V. Please refer to the camera manual for the camera power

supply, since it's not from the car rear view mirror. The 24V camera is advisable if

installed to truck or purchase the power adapter to convert the voltage.

User's Manual

Chapter one: Product Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 Package. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.3 Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.4 Operating panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Chapter two: Installation and Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.1 How to install . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.2 Special bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2.3 How to wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.4 How to display the rear view mirror screen . . . . . . . . . . . . . . . . . . . . 8

Chapter three: Adjustable Guideline. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3.1 About guide line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.2 What is the regular guide line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.3 How to adjust the guide line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Chapter f : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .our 11Menu Setting

4.1 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

4.2 Menu setting guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Page 3: 7 3inch full screen display rearview mirror standard version

Chapter one: Product Introduction

1.3 Specification

The packing box contains the following accessories, please confirm: Car rear view mirror monitor with 7.3 inch wide LCD display screen wire harness User's manual wire cover Remote controlFor the items listed above, please check with your package box. If any damage,

Please contact with the distributor or the agent as soon as possible.

1.1 Package

●●

●●

7.3 inch wide LCD display screens

3-way video input

Back up camera display

Automatic brightness adjustment

4.0 mm glass and 21 mm car factory OEM bracket

Adjustable guide line

Mode switch between wide screen and dual screens LCD display separately

1.2 Features●

φ●

Screen size: 7.3 inch

Display screen: TFT-LCD

Aspect resolution: 1280(H)*390(V)

Working voltage: 12V

Working temperature: -20℃~+65℃

Signal system: PAL/Auto/NSTC

1.4 Operating panel

7.3 inch ultra high brightness display screen

1

Turn on/off the display screen

Indicator

1

2

3

4

5

6

7

2 3 4

7

6

5

Front light sensor

Shortcut key to back up camera Short press any key in the left until the indicator light is on.Short press “R” to Back Up Camera. But it doesn't work when it's in reversing mode.

Switch between different video channelsShort press it to make the video channels switch among DOUBLE, VIDEO1, VIDEO2, BACK UP CAMERA. No guide line display on the monitor no matter how many times when you press “CH”. When the reversing line is connected to the 12V, it would change to BACK UP CAMERA automatically, and guide line is on the monitor, which can be adjusted by the remote.

Color mode adjustmentShort press it can adjust the color mode of the image. Four modes are available, that is STANDARD, BRIGHT, BEAUTIFUL, and SOFT. Please be noted that these modes only are accessible when it's not in reversing mode.

Page 4: 7 3inch full screen display rearview mirror standard version

2 3

8

9

10

11

12

14

15

13

16

17

18

Horn

Special bracket

8

9

10

11

12

13

14

15

16

17

18

19

Red to ACC+

Black to GND

Turn left signal (option)

Turn right signal (option)

Back up signal

Video input

Video input

Camera

Connector

20

Connector cover

19

8

20

Cable cover

Page 5: 7 3inch full screen display rearview mirror standard version

2.1 How to install

Remove the original rear view mirror and remain the metal base on the windscreenOriginal car rear view mirror

Along this directionto install rear view mirror

Along this directionto install rear view mirror

Along this directionto install rear view mirror

contrarotate the fixed rear view mirror

1

We have many kinds of brackets. one of them must suit for your car, and we are not going to go through anymore examples, because the space is limited.If you don’t find the same bracket here as your car, please contact us.

2.2 Special bracket

4 5

Chapter two: Installation and Wiring

Different cars have different brackets. It depends on your vehicle maker and manufacturer.There are many methods to remove the original rear view mirror, however, please don’t force the mirror off the bracket. The manufacturer will not be responsible for any damage caused to your car by wrong installation of the mirror.

Remove the original mirror

Install mirror monitor on the base

Page 6: 7 3inch full screen display rearview mirror standard version

2.3 How to wire

3M

6 7

power harness

PUSE BOX

Black to GND

Red to ACC +12V

Black to GNDRed to ACC +12V

Black to GNDRed to ACC +12V

Black to GNDRed to ACC +12V

Back up video

Left video

Right video

Turn right signal(option)

The advisable installationposition for camera

Back up video

Right video

By connecting the green line, the reversing signal is input to the rear view mirror and reversing video can automatically display on the wide 7.3 inch LCD monitor.

Turn left signal (option)

Left

vid

eo

CTR1(Green)it's advisable to connect the reversing line

Page 7: 7 3inch full screen display rearview mirror standard version

2.4 How to display the rear view mirror screen.

8

Status B:Wide screen would display the rear image when it's in parking mode.

Status A: In normal driving, the car monitor can display left and right video, to facilitate drivers to observe the condition of the two sides (There will be different video displayed on mirror according to the different location of camera ).

Status C : When the car is turning to left, the left light is on, and (option)turning left signal would trigger automatically the left camera to get the full screen. After it closes for 3S, the screen would get back.

Status D (option): When the car is turning to right, the right light is on, and turning right signal would trigger automatically the right camera to get the full screen. After it closes for 3S, the screen would get back.

Status E (option): When the front two turning lights are on, the signal would trigger automatically the left and right cameras. After it closes for 3S, the screen would get back.

9

Page 8: 7 3inch full screen display rearview mirror standard version

12 13

Chapter Four: Menu Setting

Enter picture menu

Guide line clockwise

Menu parameter decrease

Menu parameter increase

Guide line up

Guide line left

Enter guide line adjustment

Guide line anti-clockwise

Guide line right

Guide line down

Press to reset all menu and parameters

4.1 Remote control

The menu only can be set by remote control, and kindly check its definition as below.

4.2 Menu setting guidance

Short press “MENU”to enter “PICTURE”, then you can switch among “BRIGHTNESS”, “COLOR”, “CONTRAST”, “SCALE”, “START LOGO”, “PRESET”, or enter out. When it switches to “PRESET”, re-press shortly the MENU, and you would close the menu. UP and DOWN are to change the figure of each setting.

4.2.1 BRIGHTNESS ADJUSTMENT

The defaulted setting is 50, ranging from 0 to 100, and only CVBS signal can work.

4.2.2 COLOR ADJUSTMENT

The defaulted setting is 50, ranging from 0 to 100, and only CVBS signal can work.

4.2.3 CONTRAST ADJUSTMENT

The defaulted setting is 50, ranging from 0 to 100, and only CVBS signal can work.

Page 9: 7 3inch full screen display rearview mirror standard version

UP Clockwise

Down

Right

left

Move the guide line Rotate the guide line

anticlockwise

Press the button to choose the L or R adjustable guideline

Remote control

RL

Wrong�positionRight position

10 11

According to the site of standard reference line, we can put reference objects such

as desks in the back area of car. Compared with the marked reference objects, we

can adjust the sites and angle of two guide lines displayed on the monitor. You will

get the accurate and safety guide lines once they coincide with the reference

objects.Press setting button is to enter into “guide line adjustment” mode. The system is

defaulted to adjust left guide line firstly. Press the button again will switch to adjust

the right guide line. The up , down left and right buttons are to adjust the correspondent location of guide lines. The clockwise rotation and

contra rotation buttons are to adjust the angle of guide lines. It is easy to operate and calibrate. After finishing calibration, switch the reverse gear to save

the information.

Caution: keep the remote control 0.5m-1.0m from rearview mirror when you use the remote to adjust the parking lines.

3.3 How to adjust the guide line

Display�on�the�monitor

Generally, to help drivers estimate the distance from obstacles, there are three lines for reference -red, yellow and green. Those three lines are displayed on the monitor when car is reversing. The green line is 3m from the back of car and the yellow line is 2m. The distant red line is 1m from the backside of car while the closed red line is 0.4m. Both reference lines on the left and right should leave 0.2m space from the car.

20CM20CM

3.1 About guide line

Regular guide line is fixed. But installation sites of cameras are different as well as car size. The fixed guide line is not accurate enough for drivers. There will be a great difference between regular and fixed guide lines and car's real guide lines, especially when camera is mounted on the left or right side of car backside. It may cause accidents.

3.2 What the regular guide line is

Chapter three: Adjustable Guideline

Page 10: 7 3inch full screen display rearview mirror standard version

4.2.4 SCALE ADJUSTMENT

4.2.6 PRESET ADJUSTMENT

It's only for the model with guide lines, and no such setting for those without such function. ON is defaulted setting, and you can manually set it to OFF.

4.2.5 START LOGO ADJUSTMENT

It's defaulted as OFF, and ON is to preset the menu, then it switches to OFF automatically.

It's is defaulted as “ON”, you can set it to “OFF” manually.

The reversing mode is the top priority, then all touch panel is ineffective. The video cannot be switched until the parking mode is ended. But the manual button is accessible. Short press is to adjust the brightness of the monitor, long press to turn off the screen.

14