701 - ceragon - ip10-licensing - pdf v1.0

FibeAir IP-10

License Management

Guide

Part ID: BM-0139-0 Doc ID: DOC-00019183 Rev a.00

November 2008

Notice This document contains information that is proprietary to Ceragon Networks Ltd.

No part of this publication may be reproduced, modified, or distributed without prior written authorization of Ceragon Networks Ltd.

This document is provided as is, without warranty of any kind.

Registered TradeMarks Ceragon Networks is a registered trademark of Ceragon Networks Ltd.

FibeAir is a registered trademark of Ceragon Networks Ltd.

CeraView is a registered trademark of Ceragon Networks Ltd.

Other names mentioned in this publication are owned by their respective holders.

TradeMarks CeraMapTM, PolyViewTM, EncryptAirTM, ConfigAirTM, CeraMonTM, EtherAirTM, and MicroWave FiberTM, are trademarks of Ceragon Networks Ltd.

Other names mentioned in this publication are owned by their respective holders.

Statement of Conditions The information contained in this document is subject to change without notice.

Ceragon Networks Ltd. shall not be liable for errors contained herein or for incidental or consequential damage in connection with the furnishing, performance, or use of this document or equipment supplied with it.

Information to User Any changes or modifications of equipment not expressly approved by the manufacturer could void the users authority to operate the equipment and the warranty for such equipment.

Copyright 2008 by Ceragon Networks Ltd. All rights reserved.

Corporate Headquarters: Ceragon Networks Ltd. 24 Raoul Wallenberg St. Tel Aviv 69719, Israel Tel: 972-3-645-5733 Fax: 972-3-645-5499 Email: [email protected] www.ceragon.com

European Headquarters: Ceragon Networks (UK) Ltd. 4 Oak Tree Park, Burnt Meadow Road North Moons Moat, Redditch, Worcestershire B98 9NZ, UK Tel: 44-(0)-1527-591900 Fax: 44-(0)-1527-591903 Email: [email protected]

North American Headquarters: Ceragon Networks Inc. 10 Forest Avenue, Paramus, NJ 07652, USA Tel: 1-201-845-6955 Toll Free: 1-877-FIBEAIR Fax: 1-201-845-5665 Email: [email protected]

APAC Headquarters Ceragon Networks (HK) Ltd. Singapore RO Level 34 Centennial Tower 3 Temasek Avenue Singapore 039190 Tel - + 65 6549 7886 Fax: +65 6549 7011

Contents

General .......................................................................................................... 1

Getting Started.............................................................................................. 1

How to use the System................................................................................. 5

Managing the License .................................................................................. 6

Working with Devices .......................................................................................... 6

Working with Licenses....................................................................................... 16

Settings ............................................................................................................... 23

Generating Reports ............................................................................................ 25

FibeAir IP-10 License Management System 1

General This guide explains how to work with the FibeAir IP-10 web based License Management System.

The system enables authorised users to obtain license-related information and perform license-related operations.

Getting Started To start the management application:

1. In your web browser, go to the address http://80.74.99.83/LMManage/login.aspx

2. To log in to the system, enter your user name and password, and then click Login.

Note the following user name rules:


For Demo OEM, the first five digits must be 00001. The next four digits after the first five should be numbered starting with 0001 for end users. For example, the number 000010001 would mean that Demo OEM end user 0001 is entering the system.

For users other than Demo OEM, the user name must start with 00000. For example, the number 000000001 would mean that non-Demo OEM user 0001 is entering the system.

For OEM Users

3a. If you enter as an OEM user, the following web page appears:

One of two modes can be selected:

Administrator (Demo OEM option) - The administrator can assign licenses and devices to customers, who can be either another OEM customer or Demo OEM. In this mode of operation, the OEM admin can assign licenses/devices to end users (including themself) and can generate license keys for the devices.

End User (Customer option) - The OEM end user, or the OEM itself can generate keys for self use. In this mode, the user can only generate licenses based on the available device database. The user can only view his/her own devices (that were assigned to that user) and licenses.

CeraView User Guide 3

End users that belong to that channel cannot see devices or licenses that belong to the OEM or other customers.

After you select the operating mode, the following web page appears:


For Non-OEM Users

3b. If you enter as a non-OEM user the following web page appears:

Note that a channel or OEM user can also enter as one of their customers. In this case, the system identifies the user as a channel/OEM user and will display a drop-down list to enable entry under the user's name. This will be done to allow operations for devices that the user sent to his/her customers.


How to Use the System The menus that you can select from are grouped according to their functions. Simply click the item you want within a menu group (such as the Devices or Settings group).

When you select an item within a group, the relevant web page will open with the details concerning that item.

At the top of the web page for the item, a line appears with buttons that you can click to perform a particular operation.

From within an item web page, you do not have to return to the main web page. Instead, use the tabs at the top (Devices, Licenses, etc.) to obtain a list of items for the particluar group.

Note that in any web page, you can click Print to send the contents of the page to the printer.


Managing the License The following sections describe the system menus and options that you can select to obtain information concerning your licenses and to perform license-related operations.

Working with Devices

The Devices group includes items that can be selected to perform device-related operations, such as to obtain information about the devices included in your license, or import a device list from another source.

Device List

To obtain a list of devices:

In the Devices group, select All Devices, or click the Devices tab at the top of the web page (if it appears).

The following web page appears:


Note that for OEM users, the Generate Keys button is replaced with Assign to Customer

.

The list includes all the devices you purchased from Ceragon.

Click Device ID for a more deatiled description of the device.

In this page, you can assign the current ID to an end user, using the drop-down list in the Assign to Customer field.


Search for Devices

In the main device list web page, you can click Search to locate a particular device that is registered in the system.

Select the criteria (filters) you want for the search, and then click Search.

To clear the criteria you selected, click Clear.


Import Devices

In the toolbar, click Import to import a list of devices from an external source.

You will be prompted to locate the file with the device list. Once you locate and select the file, click Import.

The device list file must be a text file with the following columns:

Device ID Customer Country Region / Network Link Side

In the Device ID column, use only upper case letters.

Adding and Deleting Devices

To add a new device, in the toolbar, click New .


Enter a valid device ID in the field and click Save.

The device will be added to your device list.

To delete a device, select the device in the list, and click Delete .

Exporting a Device List

To export a device list to a file, click Export .

The list will be saved in an Excel file with the extension csv (Comma Separated Values).

Generating Keys

To generate license keys for one or more devices, select the devices in the main list by marking the

checkboxes beside them, and click Generate Keys .


In this web page, only the devices you selected will appear.


The All Relevant Licenses area shows only the licenses that are common to all devices you selected (meaning their lowest common denominator).

The current license types include the following:

1 = ACM

2 = Networking

3 = Capacity Upgrade

The following tables list the current license possibilities:

Capacity Upgrade License

Type Value Description Name in License Management Site

3 0 IP10-CAP-010 Feature disabled 3 1 IP10-CAP-025 Radio Cap. Upgrade 10->25 Mbps 3 2 IP10-CAP-050 Radio Cap. Upgrade 10->50 Mbps 3 3 IP10-CAP-100 Radio Cap. Upgrade 10->100 Mbps 3 4 IP10-CAP-150 Radio Cap. Upgrade 10->150 Mbps 3 5 IP10-CAP-200 Radio Cap Upgrade 10->200 Mbps 3 6 IP10-CAP-300 Radio Cap Upgrade 10->300 Mbps 3 7 IP10-CAP-400 Radio Cap Upgrade 10->400 Mbps 3 8 IP10-UPG-025-050 Radio Cap. Upgrade 25->50 Mbps 3 9 IP10-UPG-025-100 Radio Cap. Upgrade 25->100 Mbps 3 10 IP10-UPG-025-150 Radio Cap. Upgrade 25->150 Mbps 3 11 IP10-UPG-025-200 Radio Cap. Upgrade 25->200 Mbps 3 12 IP10-UPG-025-300 Radio Cap Upgrade 25->300 Mbps 3 13 IP10-UPG-025-400 Radio Cap Upgrade 25->400 Mbps 3 14 IP10-UPG-050-100 Radio Cap. Upgrade 50->100 Mbps 3 15 IP10-UPG-050-150 Radio Cap. Upgrade 50->150 Mbps 3 16 IP10-UPG-050-200 Radio Cap. Upgrade 50->200 Mbps 3 17 IP10-UPG-050-300 Radio Cap Upgrade 50->300 Mbps 3 18 IP10-UPG-050-400 Radio Cap Upgrade 50->400 Mbps 3 19 IP10-UPG-100-150 Radio Cap. Upgrade 100->150 Mbps 3 20 IP10-UPG-100-200 Radio Cap. Upgrade 100->200 Mbps 3 21 IP10-UPG-100-300 Radio Cap Upgrade 100->300 Mbps 3 22 IP10-UPG-100-400 Radio Cap Upgrade 100->400 Mbps 3 23 IP10-UPG-150-200 Radio Cap. Upgrade 150->200 Mbps 3 24 IP10-UPG-150-300 Radio Cap Upgrade 150->300 Mbps 3 25 IP10-UPG-150-400 Radio Cap Upgrade 150->400 Mbps 3 26 IP10-UPG-200-300 Radio Cap Upgrade 200->300 Mbps 3 27 IP10-UPG-200-400 Radio Cap Upgrade 200->400 Mbps 3 28 IP10-UPG-300-400 Radio Cap Upgrade 300->400 Mbps


ACM

License Type Value Description

Name in License Managament Site

1 0 Feature disabled 1 1 IP10-ACM ACM

Networking (Metro Switch Enabled)

License Type Value Description

Name in License Management Site

2 0 Feature disabled 2 1 IP10-Metro Metro Switch

To add a license for which you want to generate a key, select the license in the All Relevant Licenses area and click Add to add it to the Selected Licenses area.

Important! You can only select one license from each category (ACM, Networking, Capacity Upgrade). If you select a capacity upgrade license and want to add a different capacity upgrade license, you must first remove the first capacity upgrade license and then add the other one.

Once you select the licenses you want, click Generate Keys.

After you confirm your selection, the following example web page appears.


Assigning Devices to a Customer

For OEM users, you can assign devices to other users by selecting Assign Devices to a Customer in the main web page Devices group. Or, you can click Assign to Customer at the top of the page.

In the Select Customer field, use the drop-down list to choose the customer you want to assign the devices to.

Click Show Available Devices for a list of devices you can choose from.

In the available list of devices, click Filter & Sort to customize the device list, as shown in the following example page.


You can specify the ID of the device you want to include in the list, and select the list sort order (ascending or descending).

After you click Go to generate the list, in the Available Devices list, select the devices you want to assign to the user, and click Add to add them to the Assigned Devices list.

When you complete the operation, click Save.

In the confirmation page, click Confirm.

The following example page appears:


Click Continue to go back to the device list page.

The device list page will appear with the updated information.


Working with Licenses

In the Licenses group, select All Licenses, or click the Licenses tab at the top of the web page (if it appears).


The web page displays all the licenses you currently own.

To search for a particular license, click Search, specify the criteria you want, and click Search again.

Click the number in the Qty Assigned column for a list of licenses assigned to customers.


Click the number in the Qty Generated column for a list of licenses used to generate keys.


To generate license keys, select Generate Keys in the Licenses group in the main web page, or click Generate Keys in the web page that appears when you click the Licenses tab.

To add a license for which you want to generate a key, select the license in the All Available Licenses area and click Add to add it to the Selected Licenses area.

Click Show Relevant Devices for a list of devices associated with the licenses you chose.


To add a device for which you want to generate a key, select the device in the All Available Devices area and click Add to add it to the Selected Devices area.

Once you select the devices you want, click Generate Keys.

The keys will be generated, as shown in the following example page, and the database will be updated.


Assigning Licenses to a Customer

For OEM users, you can assign licences to other users by selecting Assign Licenses to a Customer. Or, you

can click the Assign to Customer button at the top of the page.

In the Select Customer field, use the drop-down list to choose the customer you want to assign the licenses to.

Click Show Available Licenses for a list of licenses you can choose from.


In the Filter by Type field, click the drop-down list and choose the license type (Capacity, ACM, Networking).

For License Code, click the drop-down list and choose the license specifications.

For Quantity to Assign, enter the amount of licenses you want to assign to that customer. The maximum quantity is limited to the available quantity for the license you choose.

After you complete the filter options, click Add to add the licenses to the Assigned Licenses list. You can repeat this procedure more than once to add other license types.

For Quantity to Return, enter the amount of unused licenses you would like to return (if relevant).

Click Save to save the license assigment information in the database.

In the page that appears, click Confirm to confirm the assignment.

A page will appear informing you that the operation was successful, and the main license list will be updated with the information.


Settings

In the main web page, the Settings group includes items you can select for system information and configuration.

Managing Users

Select the Manage Users item to define users and modify their properties. You can also access this item by clicking the Settings tab at the top of the page (if it appears).

Use the Search button at the top to locate a particular user.

To define a new user, click New . The following page appears:


In this page, enter the information in the fields, and then click Save.

To delete one or more users, in the user list, mark the checkboxes beside the users you want to delete, and

click Delete . Confirm your choice(s) in the page that appears and the users will be deleted.

Modifying your Profile

In the main Settings page, select the My Profile item to modify your personal information.

The same page appears as that for a new user. Modify the information as desired and click Save.


Generating Reports

In the main web page, you can select a report to generate: an Orders report, or a Devices and Activations report.

To generate a report, select Orders Report or Devices & Activations Report in the main web page, or click the Reports tab at the top of the page (if it appears).

For an Orders Report:

For Order No., you can select All or Between. If you select Between, specify the range of order numbers you want to include in the report.

For Order Date, you can select All or Between. If you select Between, you will need to specify the range of dates you want to include in the report.

In the Include field, you can select All for all types of orders, Closed orders only, or Open orders only.

When you are done selecting the report criteria, click Create Report.


For a Devices & Activations Report:

For Devices, you can select All or Between. If you select Between, specify the range of device IDs you want to include in the report.

For Activation Date, you can select All or Between. If you select Between, specify the range of activation dates you want to include in the report.

When you are done selecting the report criteria, click Create Report.

701 - ceragon - ip10-licensing - pdf v1.0

Documents

trademarks of ceragon

ceragon networks uk

fibeair fax

uk tel

tel aviv

israel tel

usa tel

fibeair ip