710 hc-l - liebherr...net making inspection and maintenance easier than ever. easy going – from...
TRANSCRIPT
710 HC-LSets new ma rks i n l i f t i n g we i gh t s
710 HC-L
LBC 710 HC-L_4seiter_342x240_enUS_2016_12.indd 1 13.12.16 16:42
Which side are you on? With the 710 HC-L: on both.New tower: 7.9 ft external dimension; internal or external climbing
There’s power in itIn order to reach fast hoist speeds, the 710 HC-L uses two hoist drives simultaneously. Luffing speeds are increased by using powerful drives in combination with a new software logic. This crane is available in four versions.
Easy handlingOperate with ease using a powerful PLC combining features likehorizontal load movement and the fine positioning mode MICROMOVE.All electronic components have been incorporated into one switch cabi-net making inspection and maintenance easier than ever.
Easy going – from place to placeDespite its great performance the 710 HC-L can be transported in contai-ners and disassembled by a Liebherr Derrick crane. Each crane part has been minimized to 22,000 lbs maximum.
High tower – all newWith the new tower system the 710 HC-L climbs inside or outside the building. The redesigned tower comes with the established measure-ments of 7.9 ft external dimension.
Hoist gears (hp)
710 HC-L 25/50
2 x 87
2 x 148
710 HC-L 32/64
2 x 87
2 x 148
Luffing drive (hp)
148
215
Free standing tower heights
External climbing; C25
jib length (ft) 98‘ 131‘ 164‘ 197‘
tower height (ft) 245‘ 227‘ 208‘ 171‘
Turn and liftThe 710HC-L can be optionally equipped with an additional hook, the „Fly-Jib“, for lifting loads of up to 28.880 lbs and turning large compo-nents.
Modular conceptWith the new platform design the decision on which side you want the cabin is up to you. According to the requirements of your construction site you place it either left or right.
LBC 710 HC-L_4seiter_342x240_enUS_2016_12.indd 2 13.12.16 16:42
The new 710 HC-LSets new marks in lifting weights
Up to 141,100 lbs maximum load
Maximum 213 ft jib length
Single parts minimized to 22,000 lbs for easy Derrick disassembly
Up to 3,500 ft hook height
Optional Fly-Jib
Developing the new 710 HC-L luffing jib crane, we did not simply want to increase our smaller luffing jib cranes but to fulfill our customers‘ special requirements. The result is a completely redesigned crane which sets new marks in performance, efficiency and flexibility.
LBC 710 HC-L_4seiter_342x240_enUS_2016_12.indd 3 13.12.16 16:42
Radius and capacity 710 HC-L 25/50 Radius and capacity 710 HC-L 32/64 jib length (ft) working radius (ft) 98‘-4“ 114‘-8“ 131‘-2“ 147‘-6“ 164‘-0“ 180‘-4“ 196‘-9“ 213‘-3“
213‘-3“ 13‘-1“ - 78‘-9“ 70550 54260 44710 37370 31510 26700 22670 19210 16100
196‘-9“ 13‘-1“ - 85‘-3“ 70550 59600 49190 41170 34790 29550 25120 21260 -
13‘-1“ - 55‘-9“ 105830 54150 43880 35920 29570 24320 19910 16540 -
180‘-4“ 13‘-1“ - 90‘-9“ 70550 64180 53030 44430 37550 31880 27010 - -
13‘-1“ - 53‘-6“ 119050 58490 47490 38980 32170 26530 22270 - -
164‘-0“ 13‘-1“ - 96-3“ 70550 68570 56600 47360 39930 33650 - - -
13‘-1“ - 51‘-3“ 132280 62180 50530 41520 34260 28890 - - -
147‘-6“ 13‘-1“ - 100‘-9“ 70550 70550 59680 49650 41410 - - - -
13‘-1“ - 50‘-6“ 141100 65370 53090 43500 36600 - - - -
131‘-2“ 13‘-1“ - 104‘-3“ 70550 70550 61980 50730 - - - - -
13‘-1“ - 52‘-3“ 141100 67640 54830 45860 - - - - -
114‘-8“ 13‘-1“ - 107‘-3“ 70550 70550 62550 - - - - - -
13‘-1“ - 53‘-9“ 141100 68330 56000 - - - - - -
98‘-4“ 13‘-1“ - 98‘-6“ 70550 70550 - - - - - - -
13‘-1“ - 53‘-9“ 141100 67030 - - - - - - -
Weights in lbs
Hoist speeds 710 HC-L 32/64
120000
100000
80000
60000
40000
20000
00 50 100 150 200 300250 400350 450 500 550 600 650 ft/min
140000
2-line, 2 x 148 hp
1-line, 2 x 148 hp
2-line, 2 x 87 hp
1-line, 2 x 87 hp
lbsHoist speeds 710 HC-L 25/50
120000
100000
80000
60000
40000
20000
00 50 100 150 200 300250 350 400 450 500 550 600 650 700 750 800
2-line, 2 x 148 hp
1-line, 2 x 148 hp
2-line, 2 x 87 hp
1-line, 2 x 87 hp
ft/min
lbs
jib length (ft) working radius (ft) 98‘-4“ 114‘-8“ 131‘-2“ 147‘-6“ 164‘-0“ 180‘-4“ 196‘-9“ 213‘-3“
213‘-3“
13‘-1“ - 100‘-0“ 55120 55120 46410 38850 32830 27890 23750 20220 17050
13‘-1“ - 80‘-3“ 66140 51570 41980 34570 28640 23770 19670 16160 13450
196‘-9“
13‘-1“ - 108‘-3“ 55120 55120 51150 42840 36180 30760 26150 22140 -
13‘-1“ - 56‘-9“ 105830 56130 45860 37920 31550 26330 21900 18520 -
180‘-4“ 13‘-1“ - 115‘-9“ 55120 55120 55120 46480 39050 32940 27700 - -
13‘-1“ - 58‘-6“ 110240 60500 49500 40990 34150 28510 24260 - -
164‘-0“
13‘-1“ - 122‘-3“ 55120 55120 55120 49790 41410 34330 - - -
13‘-1“ - 61‘-9“ 110240 64270 52590 43550 36250 30870 - - -
147‘-6“
13‘-1“ - 127‘-9“ 55120 55120 55120 52760 42110 - - - -
13‘-1“ - 64‘-3“ 110240 67250 55010 45490 38590 - - - -
131‘-2“
13‘-1“ - 131‘-3“ 55120 55120 55120 51150 - - - - -
13‘-1“ - 66‘-9“ 110240 69940 56950 47850 - - - - -
114‘-8“
13‘-1“ - 114‘-9“ 55120 55120 55120 - - - - - -
13‘-1“ - 68‘-9“ 110240 70660 57990 - - - - - -
98‘-4“
13‘-1“ - 98‘-6“ 55120 55120 - - - - - - -
13‘-1“ - 70‘-3“ 110240 69010 - - - - - - -
Weights in lbs
710 HC-LS e t s n e w m a r k s i n l i f t i n g w e i g h t s Minimized out-of-service radius of only 62.3 ft at 213 ft jib length
Minimal radius due to compact slewing platform design
Maximal usage of tower height because of ballast stacked on top
LBC 710 HC-L_4seiter_A2-Poster_enUS_2016_01.indd 1 04.03.16 15:58
www.liebherr.com
Made in Germany
Prin
ted
in G
erm
any
GU
- L
BC
-754
-01.
17_e
nUS
T
his
info
rmat
ion
is s
uppl
ied
with
out l
iabi
lity.
Sub
ject
to te
chni
cal m
odifi
catio
ns.
LBC 710 HC-L_4seiter_342x240_enUS_2016_12.indd 4 13.12.16 16:42