(74.4) n6 date october 2014 invisi ii 6.15...is fixed using the d.788 sanifix bolt through the wall...

The morestars the morewater efficient

A joint government and industry program

litres per full flush

litres per half flush

4.53

3.5 litres per average flush

For more information and to compareproducts, refer to:

www.waterrating.gov.au

When tested in accordance with Standard AS/NZS 6400

WATERRATING

Licence No. 0001

®

CI/SfB(74.4) n6

DateOctober 2014

Supersedes all previous issues

6.15.1Invisi IIDual Flush/Single Flush Inwall/Under Counter/Induct/Inceiling Cistern

The morestars the morewater efficient

A joint government and industry program

litres per flush per stall

Water Consumption

For more information and to compareproducts, refer to:

www.waterrating.gov.au

When tested in accordance with Standard AS/NZS 6400

WATERRATING

1.8

Licence No. 0001

Caroma Industries Limited ABN 35 000 189 499 Sales Offices in all States.

®

Integrated flush pipe support

205max.

90

45

400

Water inlet connection

582

(sup

plie

d)41

2 -

582

(adj

usta

ble)

45

Studs 400mm – 420mm

To centre lineof buttons

Note: Cistern height can be increased to 3m with additional flush pipe extension kit

Invisi II 4.5/3 Dual Flush Inwall/Under Counter/ Induct/Inceiling Installation

Invisi II 1.8 Single Flush Urinal Inwall/Induct/Inceiling Installations

A 4.5/3 litre dual flush plastic cistern suitable for inwall, under counter, induct and inceiling applications. The cistern features a number of contemporary button design options with concealed fixing that are pneumatically operated for ease of operation and installation. The push buttons can be activated remotely up to 4 metres from the cistern, ideal for care and custom applications. The cistern incorporates Caroma Smartflush water saving technology. For installation flexibility the cistern, bracket and specially designed waste pipe have been developed to be installed in a standard 90mm metal or timber stud wall applications.The cistern is adjustable to 6/3 litre dual flush. Extended pneumatic hoses are additional and supplied separately Code No.237702. Alternatively the extended hose is also supplied with the Remote Access Mounting Box kit Code No.237006.

Invisi II Dual Flush Installations:Inwall – The cistern can be fitted within a minimum cavity of 90mm with service access within the room via the standard or large button panel. A range of access panel kits are available to suit dual flush, single flush and remote push button positions.Under Counter – The cistern can be fitted under counter with a minimum cavity depth of 90mm for front mount button installations and 100mm from the finished wall face to the counter's internal front face, for top mount button installations, as illustrated in Invisi II page 4 (not suitable for urinals).Induct – The cistern is suitable for behind the wall installations in a single service duct, as illustrated Invisi II page 6.Inceiling – The cistern is suitable for mounting in the ceiling duct where access is provided for adjustment and servicing. This installation requires the fabrication of a flush pipe using 40mm DWV and Flush Pipe Extension components contained in the Remote Mounting Box Kit Code No. 237006, as illustrated Invisi II pages 7 and 9. Due to the high head height only nominated Caroma boxed rim pans should be used with this installation.Invisi II Buttons – Buttons and access plate are not included with the cistern, see Invisi II page 3 for available options.Invisi II Inwall/Under Counter/Induct/Inceiling Cistern – For wall faced pan applications, Code No.237001. For wall faced pan installations the cistern is simply mounted in position with the twobrackets supplied which are screwed to the studwork.Invisi II Under Counter – For wall hung pan applications, Code No.237004. The D.403 Invisi II WH Bracket is supplied for concrete floors or stud wall installations. The bracket system is suitable for installation only where non compressible wall materials are used.Invisi II Inwall/Induct/Inceiling Cistern – For wall hung pan applications, Code No.237003. The D.402 Invisi II WH Bracket is supplied for concrete floors or stud wall installations. The bracket system is suitable for installation only where non compressible wall materials are used.Invisi II Structural Brick Wall – For structural brick walls the cistern is fixed inwall and the wall hung pan is fixed using the D.788 Sanifix Bolt Through the Wall Bracket.

Invisi II Urinal Single Flush: The Invisi II 3 star, 1.8 litre single stall urinal cistern is supplied with instructions for conversion to suit two stall and three stall, and 0.8 litre applications. A copper sparge adapter is included in place of a flush pipe. Working pressure is minimum 30kPa to maximum 1000 kPa flow pressure.

Colours: White, chrome and satin chrome button options available see Invisi II page 3.

Dimensions: All dimensions are in millimetres and are subject to normal manufacturing tolerances. Caroma pursues a policy of continuing improvement in design and performance of its products. The right is therefore reserved to vary specifications without notice.

Shown with D.403 Invisi II Wall Hung Pan Bracket and Invisi Dual Flush Plate and Buttons.


Invisi II Buttons and Plates(suitable for cistern access)

Invisi II Custom Buttons(cistern requires alternative access)

Invisi II Access Panel Options for Inwall Applications(Buttons supplied separately)

Large Access Panel Dual Flush— Top Code No.237030

Note:— Large access panels are recommended for double brick wall installations.

850

125

470

95

Invisi II Round Dual Flush Plate and Buttons Code No.237010WCode No.237010CCode No.237010S

Invisi II Round Dual Flush Custom ButtonsCode No.237013CCode No.237013S

Invisi II Rectangle Dual Flush Custom ButtonsCode No.237023CCode No.237023S

Invisi II Round Single Flush Custom ButtonCode No.237012CCode No.237012S

Invisi II Rectangle Single Flush Custom ButtonCode No.237022CCode No.237022S

Invisi II Rectangle Dual Flush Plate and ButtonsCode No.237020CCode No.237020S

Invisi II Blank Access PlateCode No.237024CCode No.237024S

Invisi II Round Care Dual Flush Plate and Raised ButtonsCode No.237011CCode No.237011S

Large Access Panel Single Flush — Bottom Code No.237032

850

125

125

470

Invisi II Rectangle Single Flush Plate and ButtonCode No.237021CCode No.237021S

Remote Button Plate Installation

6767 34

78

68

78

68

34

55

210

11055

210

110 55

210

110 55

210

11055

210

110

6mm min. – 45mm max.wall lining thickness

Custom Button Installation

5mm min. – 45mm max.wall thickness

Invisi II Remote Mounting Box Kitincludes 2 x 4m pneumatic hose with flush pipe extension componentsFor use with induct or remote mounted button installations.Code No.2370064m pneumatic hoseCode No. 237702(2 hoses required for remote dual flush installations)

5mm min. – 45mm max.wall thickness

Standard button plateInstallation

Invisi II


Invisi II

Finished floor

Invisi II cistern

Finished wall

A

Metro 408

Cube 408

Walvit 405

90mm min. front button installation100mm min. top button installation

430

410

365

cent

re o

f inl

et79

5

A

Bench thickness 45mmmax. for top push buttons 55

min

.85

0 m

in.

915

min

. for

Odo

urva

c op

tion

suita

ble

for f

ront

pus

h on

ly

Integratedisolating

valve supplied,allows for side

and back waterconnections

Access plateTop mountbuttons

Access plateFront mount

buttons

Note: access to cistern internals can be achievedthrough either front or top mount button plate option.

Accurate positioning of the waste piperelative to studwork is essential.Metro Wall Hung pan illustrated

Ace

ntre

of i

nlet

B55

min

.C

(+65

for O

dour

vac

optio

nsu

itabl

e fo

r fro

nt p

ush

only

)

25 to

top

of fl

ush

pipe

sup

port

nogg

in

Pan foot level


410

A B C

Cube 358 795 – 940 850 – 995

Geo 358 795 – 940 850 – 995

Leda 383 795 – 965 850 – 1020

90mm min. front button installation100mm min. top button installation

Bench thickness 45mmmax. for top push buttons

Invisi II cistern

Finished wall

Integratedisolating

valve supplied,allows for side

and back waterconnections

Access plateFront mount

buttons

Note: access to cistern internals can be achievedthrough either front or top mount button plate option.Accurate positioning of the waste pipe

relative to studwork is essential.Leda Wall Faced pan illustrated

Access plateTop mountbuttons

Under Counter Wall Hung Invisi II Smartflush Suite Dual Flush Installation

Under Counter Wall Faced Invisi II Smartflush Suite Dual Flush Installation

The bracket system is suitable for installation only where non compressible wall materials are used.


Invisi II

Accurate positioning of the waste piperelative to studwork is essential.Cube Wall Hung pan illustrated

Access plateand buttons

Invisi II cistern

90min.

365

cent

re o

f inl

et58

2

947

Finished floor

55

210

110

408

ref

550

213

Integrated isolating valve

supplied

400-420 Frame

45

25

40

6 min. – 45 max.wall thickness

170 max. from finished wallwith Invisi II WH pan connector

For 100mm UPVC DWVconnection use Caroma Invisi II

wall hung waste connector

55 m

in. t

o un

ders

ide

of n

oggi

n

Wall hung bracket suitable for structural slab or stud wall installation

Stud fixing bolt kit ( Not supplied)

Spacer if required(Not supplied)

Stud wall installation(For non-structural floor)

Note: access to cistern internals can be achievedthrough button plate.

Integratedisolating valvesupplied

400 – 420 Frame

Invisi II cistern

90min.

395

383

cent

re o

f inl

et58

2 Su

pplie

d(a

djus

tabl

e fro

m 4

12 –

582

)

45

Pan footlevel

55

210

110

230

155

Recommended90 setout(85 – 120 range)

25

610

Uniconnector

185

965

Sup

plie

d(a

djus

tabl

e fro

m 7

95 –

965

)

Integrated flush pipe support25

to to

p of

flus

h pi

pe s

uppo

rt no

ggin

55 m

in. t

o un

ders

ide

of n

oggi

n


Access plateand buttons

Note: access to cistern internals can be achievedthrough button plate.

Accurate positioning of the waste piperelative to studwork is essential.Leda Wall Faced pan illustrated

Inwall Wall Hung Invisi II Smartflush Suite Dual Flush Installation

Inwall Wall Faced Invisi II Smartflush Suite Dual Flush Installation



Invisi II cistern

395

383

cent

re o

f inl

et58

2 S

uppl

ied

(adj

usta

ble

from

412

– 5

82)

965

Sup

plie

d (a

djus

tabl

e fro

m 7

95 –

965

)

45Remote mountedplate and buttons

5 min. – 45 max. walllining thickness

5555

210

110

230

155

Recommended90 setout(85 – 120 range)

25

610

Uniconnector

185

Service duct (Cistern to be installed backwards for service duct access)

25 to

top

of fl

ush

pipe

sup

port

nogg

in


Use flush pipe extension kitfor higher installation

Pan footlevel

135 max. with flushpipe (supplied)


supplied

Accurate positioning of the waste piperelative to studwork is essential.Leda Wall Faced pan illustrated

Invisi II cistern

170 max. from finished wallwith Invisi II WH pan connector

Finished floor

213

40

25

550

365

cent

re o

f inl

et58

2

947

408

ref

45

D788 Sanifix Bolt through wall bracketCode No.687788

Structural Wall Installation (Option)5555

210

110

For 100mm UPVC DWVconnection use Caroma Invisi II

wall hung waste connector


Wall hung bracket suitable for structural slab or stud wall installation(Use D788 for structural wall installation)

5 min. – 45 max. walllining thickness

135 max. with flush pipe (Supplied)


supplied

Accurate positioning of the waste piperelative to studwork is essential.Cube Wall Hung pan illustrated

Remote mountedplate and buttons

Invisi II

Induct Wall Faced Invisi II Smartflush Suite with Remote Mounting Box Kit

Induct Wall Hung Invisi II Smartflush Suite with Remote Mounting Box Kit

The waste pipe must be accurately centralised to achieve a minimum wall cavity dimension of 90mm.



For 100mm UPVC DWV connection use CaromaUniconnector PVC adaptorVinidex Code No.55785

Ceiling access

Ceiling void

950

Rec

omm

ende

d pu

sh b

utto

n po

sitio

n

Flush pipeextension kit

90

3m m

ax.

400 – 420 frame

45

395

185

Recommended90 setout

(85 – 120 range)

Pan footlevel

25

155

230

Uniconnector

Invisi IIcistern

Invisi II FlushPipe Extension90mm Cavity(components suppliedwith remote mountingbox kit)


Flush pipe Adaptor(supplied)

Breather Tube(supplied)

Flush Pipe(with cistern)

Kee Seal(supplied)

40mm PVC DWV PipeCut to length and solvent weld (not supplied)



Cistern Adaptor(supplied)

Breather Tube(supplied)

40mm 90° PVC DWV elbow (not supplied)

Kee Seal(supplied)

Cistern Adaptor(supplied)

Note: Minimum wall cavity 70mm if cistern is inceiling. 90mm if cistern

is in wall cavity. 150mm if uniconnector is in wall cavity.


Where the ceiling space is restricted the Invisi II can be dropped into the wall cavity.

383

cent

re o

f inl

et

25 to

top

of fl

ush

pipe

supp

ort n

oggi

n

4.5 min. – 45 max. wall claddingthickness

4 metres long (max.) pneumatic tube

(Included with remote mounting box kit)

Leda Wall Faced pan illustrated

Remote mountedplate and buttons

40mm DWVfabricated flush

pipe

Integrated isolating valvesupplied

Invisi II

Inceiling Wall Faced Invisi II Smartflush Suite with Remote Mounting Box Kit


Invisi II

4.5/3 LITRE DUAL FLUSH - Toilet Suites

For 4.5/3 litre the bucket is preset. Connect pneumatic hosesto both the half flush and full flush positions.

1.8 LITRE SINGLE FLUSH - Single Stall Urinal

For 1.8 litre flush the bucket is preset. Connect the pneumatic hose to the full flush position.

0.8 LITRE - Single Stall Urinal

For the 0.8 litre flush adjust the bucket to the 0.8L mark. Adjust water level to appropriate mark on cistern tank. Connect the pneumatic hose to the full flush position.

3.8 LITRE - 2 Stall Urinal

For 3.8 litre flush, adjust the bucket to the 3.8L mark, and reset the waterlevel to the corresponding mark on thecistern. Connect the pneumatic hose to eitherflushing position.

5.8L LITRE SINGLE FLUSH - 3 Stall Urinal Conversion

For 5.8 litre flush remove outlet valve from cistern and bucket (see below), refit outlet valve in cistern.Connect the pneumatic hose to either flushing position.

6/3 LITRE DUAL FLUSH - Toilet Suites

For 6/3 litre flush remove outlet valve from cistern and bucket (see below), refit outlet valve in cistern.Connect the pneumatic hoses to both the half flush and full flush positions.

4.5L

1.8L

Cut the 4 tabsto remove bucket

Cut the 4 tabsto remove bucket


Invisi II

Outlet Valve

Breather Tube

Cistern Base


40mm PVC DWV PipeCut to length and solventweld to adaptors(Not supplied)

Flush pipe Adaptor(Supplied)

Cistern Adaptor(Supplied)

Breather Tube(Supplied)

Flush Pipe(supplied with cistern)

Kee Seal(Supplied)


40mm PVC DWV PipeCut to length and solventweld (Not supplied)

40mm PVC DWV Pipe - cut to length and solventweld (Not supplied)

Cistern Adaptor(Supplied)

Breather Tube(Supplied)

40mm 90° PVC DWV elbow(Not supplied)

Kee Seal(Supplied)

Flush pipe Extension Components (included in Remote Mounting Box Kit)


Invisi II Cistern

Finished wall

Finished floor

Blank Accessplate

Inwall Urinal Suite Induct Urinal Suite

540

D.1

70 C

once

aled

Fix

ing

Bra

cket

cen

tre

80

355

500

min

.33

5to

acc

ess

pane

l

597

438

315

379

stan

dard

129

disa

bled

Vitreous ChinaGrate

6530

8

Remote single flush

push button

400 – 420 Frame

45

Ø20 sparge pipe

18

*650mm recommended standard height.400mm recommended disabled height (no pedestal).

*


90mm min. cavity. 70mm min. for inceilinginstallation


5 min. – 45 max.wall liningthickness

Reducer toØ40 copper pipe

Ø40 Flush pipe


supplied

Invisi II

Inwall/Induct Urinal Invisi II Installation

(74.4) n6 date october 2014 invisi ii 6.15...is fixed using the d.788 sanifix bolt through the wall...

Documents