7460/7472 SPORT

Dye sublimation Dye fixation

R o t a r y H e a t T r a n s f e r M a c h i n e s

7460/7472 SPORT

MODEL

7460 SPORT

7472 SPORT

BELT SIZE

170 cm / 67”

190 cm / 75”

WORKING WIDTH

160 cm / 63”

180 cm / 71”

POWER INSTALLED@ 220/3PH

67 AMPS

73 AMPS

30 AMPS

35 AMPS

AVERAGE CONSUMPTION

NET WEIGHT

1450 kg / 3196 lbs

1900 kg / 4188 lbs

DIMENSIONS

265 / 175 / 154 cm104” / 68” / 61”

295 / 175 / 154 cm117”/ 69” / 60”

Technical features

• Oil-heated drum. Self contained with digital heat control• Digital variable speed control* Automatic belt tracking• Printing widths of 60” (1.5m) or 72” (1.8m) • 3 unwind stations with adjustable tension * 2 rewind stations with separately controlled speed and tension• Six light weight aluminum lift out bars “easy-grip”, 3-inch cores• Self locking safety chucks for all unwind bars• 3.5 LFM (1.3 LMM) production speed at 40 second dwell time• 13.8” (35cm) diameter heated drum• “S” wrap bars for fabric tensioning• Hand safety protection at entrance• E Stops at all corners* Lanyard controlled reversing system for safety & ease of feeding* Dual Safety Reversing Systems* Low maintenance, brushless drive motor * All electronic controls. No air required* Automatic cool down at shut down

Specifications

* Unique AIT Features

Unwind blotting paper

Unwindtransfer paper

Unwind fabric

Rewindtransfer paper

Rewindblotting paper

Rewindfabric

265 - 295 cms 110 cms (43”)

163.5 cms (64”) 104” - 116”

149.

5 cm

s58

.7”

114

cms

45”

6572-30

Sublimation printing of fabric in pieces or roll to roll

R o t a r y H e a t T r a n s f e r M a c h i n e s

The new oil heated 7400 IJO SPORT series rotary heat press has been specifically designed to meet the increasing demand for cut part digital printing.This method is widely used to print sport and team apparel.The new oil heating system guarantees a uniform heat distribution across the width of the drum with a minimum of energy consumtion. This system uses 50% less energy than electrically heated presses. The 13.8” (35 cm) diameter drum is suitable in production speed for digital printing.

7400 IJO SPORT series has 3 different options of operation:

The transfer paper is placed design side up on the table and feeds continuously into the machine. The pre-cut parts are placed on the design and registered with maximum ease. The spent print paper and the printed parts exit via a variable speed conveyor.

The transfer paper is fed continuously into the machine and cut fabric parts are placed on to the design areas. In this case the used transfer paper is re-rolled continuously under the feed table and the printed parts are released on to the variable speed exit conveyor.

Continuous printing roll-to-roll on both print paper and fabric.

The top feeding hot oil calender system will eliminate seconds caused from fabric shrinking or paper movement and increase production, saving money and energy costs. High production, quality printing and our service after the sale give you the best of reasons to invest in AIT for all of your needs in digital sublimation printing.

1.

2.

3.

7460/7472 SPORT6572-30

The AIT 6572 - 30 is specifically designed for digital dye-sub printing of apparel and other applications that require cut part and engineered prints. A new self-contained, oil heated drum system assures uniform heat across the width of the cylinder and the lowest possible power consumption. AIT oil heated drum systems use 50% less electric power than all electric machines.

The 13” (30cm) diameter drum size is optimal for digitally printed sports apparel. It has three modes of operation:

Cut sheets of printed transfer paper are placed on the table with the design facing up. The cut fabric parts (front, sleeve, collar, etc.) are placed over the design. With the push of a button, the conveyor system automatically feeds the loaded sheet into the machine. The part and paper exit under the loading conveyor where an automatic stripping device eliminates all possibilities of paper shifting or shrinking which can cause a “ghost” image. You do not need to use the more expensive “sticky paper”.

The printed transfer paper is kept on the roll and cut fabric parts are placed on the printed design as the paper feeds continuously into the machine.

Traditional printing of continuous fabric and transfer paper roll to roll.

AIT rotary heat presses with the new oil heated drum system will increase production, reduce seconds, and save on energy costs. High productivity, quality engineering design and conscientious after-the sale service are all good reasons for investing with AIT for all needs in dye-sub printing or textile dye-fixation.

1.

2.

3.

is specifically designed for digital dye-sub printing of apparel and other applications that require cut

6572-30

The AIT 6572 - 30 is specifically designed for digital dye-sub printing of apparel and other applications that require cut part and engineered prints. A new self-contained, oil heated drum system assures uniform heat across the width of the cylinder and the lowest possible power consumption. AIT oil heated drum systems use 50% less electric power than all electric machines.

The 13” (30cm) diameter drum size is optimal for digitally printed sports apparel. It has three modes of operation:

Cut sheets of printed transfer paper are placed on the table with the design facing up. The cut fabric parts (front, sleeve, collar, etc.) are placed over the design. With the push of a button, the conveyor system automatically feeds the loaded sheet into the machine. The part and paper exit under the loading conveyor where an automatic stripping device eliminates all possibilities of paper shifting or shrinking which can cause a “ghost” image. You do not need to use the more expensive “sticky paper”.

The printed transfer paper is kept on the roll and cut fabric parts are placed on the printed design as the paper feeds continuously into the machine.

Traditional printing of continuous fabric and transfer paper roll to roll.

AIT rotary heat presses with the new oil heated drum system will increase production, reduce seconds, and save on energy costs. High productivity, quality engineering design and conscientious after-the sale service are all good reasons for investing with AIT for all needs in dye-sub printing or textile dye-fixation.

1.

2.

3.

is specifically designed for digital dye-sub printing of apparel and other applications that require cut

VISIT US ONLINESourceOne.Nazdar.com

CALL US888-578-5713

© 2017 Nazdar. All Rights Reserved.Specifications subject to change without notice.

THIS PRODUCT IS BROUGHT TO YOU BY

7460/7472 SPORT

Dye sublimation Dye fixation

R o t a r y H e a t T r a n s f e r M a c h i n e s

7460/7472 SPORT

MODEL

7460 SPORT

7472 SPORT

BELT SIZE

170 cm / 67”

190 cm / 75”

WORKING WIDTH

160 cm / 63”

180 cm / 71”

POWER INSTALLED@ 220/3PH

67 AMPS

73 AMPS

30 AMPS

35 AMPS

AVERAGE CONSUMPTION

NET WEIGHT

1450 kg / 3196 lbs

1900 kg / 4188 lbs

DIMENSIONS

265 / 175 / 154 cm104” / 68” / 61”

295 / 175 / 154 cm117”/ 69” / 60”

Technical features

• Oil-heated drum. Self contained with digital heat control• Digital variable speed control* Automatic belt tracking• Printing widths of 60” (1.5m) or 72” (1.8m) • 3 unwind stations with adjustable tension * 2 rewind stations with separately controlled speed and tension• Six light weight aluminum lift out bars “easy-grip”, 3-inch cores• Self locking safety chucks for all unwind bars• 3.5 LFM (1.3 LMM) production speed at 40 second dwell time• 13.8” (35cm) diameter heated drum• “S” wrap bars for fabric tensioning• Hand safety protection at entrance• E Stops at all corners* Lanyard controlled reversing system for safety & ease of feeding* Dual Safety Reversing Systems* Low maintenance, brushless drive motor * All electronic controls. No air required* Automatic cool down at shut down

Specifications

* Unique AIT Features

Unwind blotting paper

Unwindtransfer paper

Unwind fabric

Rewindtransfer paper

Rewindblotting paper

Rewindfabric

265 - 295 cms 110 cms (43”)

163.5 cms (64”) 104” - 116”

149.

5 cm

s58

.7”

114

cms

45”

284 cm

155

cm

6572-30

MODEL

6572-30

WIDTH

230 cm / 90”

LENGTH

257 cm / 101” 155 cm / 61” 190 cm / 77”

HEIGHT BELT WIDTH AMP DRAW

50 at 220/3

WEIGHT

2843 lbs (1290 kgs)

AIR

100 psi

Technical features

• Belt feeding system with independent drive for feeding cut parts• 13” (30cm) diameter oil heated drum• Belt speeds 3.2 fpm at 40 second dwell time • 77” (196cm) wide Nomex felt for 72” (180cm) wide printing• Electro pneumatic belt steering system• Safety bar with reverse control• Cool down timer• Exit cooling conveyor• Automatic paper separator bar eliminates ghosting caused by paper shifting or fabric shrinkage• Exit cooling conveyor cools and take printed parts to the back side for stacking• All motors DC brushless• Three unwind/rewind stations for roll to roll printing

Specifications

114”84 cm

34”145 cm

58”

62”

95 c

m38

”

VISIT US ONLINESourceOne.Nazdar.com

CALL US888-578-5713

© 2017 Nazdar. All Rights Reserved.Specifications subject to change without notice.

THIS PRODUCT IS BROUGHT TO YOU BY