Dear Sir,

I wish to apply for the position of Instrument and Control Technician in your organization commensurate with my professional experience and qualification.

Currently, I am working as an “Senior Instrument and Process Control Technician” in 220 MW (CCPP), Combine Cycle Power Plant Korangi Karachi.

While working with CCPP in eraction phase I have had the chance to Commissioning work on GE LM-6000 PC Sprint Combine cycle Gas Turbines, GE Thermodyn steam turbine Type 8-11MC9 and Boilers. I have also Commission these systems include Woodward Micro logic Governing and control system, Woodward 505E Governer, Honeywell DCS, EPKS C-200 Controller, Bently Nevada 3500 Vibration and Speed Monitoring system. Allen Bradley (BMS) Guard, SLC-5. GE, RO Water Treatment system, FLOWTECH Gas Compression Stations, Gas and Steam Turbine Local Instrumentation.

Working with Pakistan Petroleum Ltd. I have had the chance to work on Amine, Glycol, Dehydration, Gas receiving and Gas gathering stations also work on Gas Compressors and Bowzer filling system.

Working with Fauji Fertilizer Company Ltd. I have also had the chance to work on some of the state of the art systems available in the country. These systems include Yokogawa Centum CS 3000 and Honeywell TDC-3000 (DCS).Foxboro Spec 200 control system, Yokogawa Prosafe and Prosafe-RS PLC,s, Mark II and Mark V (Gas Turbine control and protection system, BMS Boiler Management System). Bently Nevada Vibration Monitoring system. I have also expertise in troubleshooting & maintenance of different kinds of field and control room instrumentation.

I did my D.A.E in Instrumentation and process control Technology (1st Division) from Sind Board of Technical Education Karachi. After that I joined FFC technical training center and completed two years apprenticeship training. There I gained invaluable experience about the applied aspects of what I had learnt in the college. I also have done my B-Tech in (Electronics) from Indus Institute of Higher Education Karachi.

Please find my CV attached with this letter for a detailed review of my credentials. I look forward to hearing from you to further explore the chances of working at your prestigious organization.

Sincerely Yours,

TAHIR HUSSAIN

MC-1165 Green Town Karachi # 43 PakistanCell # +92-334-3002084; +92-300-2513118, House # +92-21-4587880E-mail: tahirhussain_jee@hotmail.com tahirhussain_jee @yahoo.com

1

TAHIR HUSSAIN INSTRUMENT AND CONTROL TECHNICIAN

MC-1165 Green Town Karachi # 43, Pakistan.Cell # +92-334-3002084, +92-300-2513118 House # +92-21-4587880E-mail: tahirhussain_jee@hotmail.com tahirhussain_jee @yahoo.com

OBJECTIVES

A career, which incorporate to educate and influence industry to adopt maintenance, safety, environment practice and seeking a challenging and responsible position.

PROFESSIONAL EXPERIENCE

1- Year Experience in Jafer Brother Pvt Ltd. As Quality Controller. 2-Year apprenticeship as Instrument Technician from Fauji Fertilizer Company Ltd.

Goth Machhi, Sadiqabad, Pakistan. 4 years work Experience as an Instrument and Control Technician in Fauji Fertilizer

Company Ltd, which is the largest urea producing plant in Pakistan, having two independent Ammonia Urea complexes, equipped with most modern control systems.

1-Year work Experience as an Instrument Technician in Pakistan Petroleum Ltd at Mazrani Gas Field Larkana. PPL is the largest company of Sui Gas Discovers and Producer in Pakistan

Presently I have been working in 220 MW CCPP Korangi Combine Cycle power plant for 2 years.

RESPONSIBILITIES AND ACTIVITIES

During my over 09–Years experience in CCPP and Fauji Fertilizer Company Ltd as an Instrument and control Technician, I have gained following experiences of different kinds of instrumentation for the large-scale Chemical and Power plant including Urea, Ammonia & Utilities (GE Gas-turbine LM-6000 & MS-5001, GE Thermodyn steam turbine Auxiliary and Waste heat Boilers, Compressors and GE, RO Water treatment areas.

My main jobs are Repairing, Maintaining, Overhauling, Calibration & installation of all types of field and Control room, Hart, Electronic, Electrical & Pneumatic instruments.

Also overhauling & Calibration of Control Valves, PSVs & Pneumatic Controllers. .

Plan and manage maintenance Activates via SAP (PM Module), Maintaining History cards and Preventive Maintenance schedules. Also mange spares parts of plant.

Solve common problem in software and hardware of DCS, PLC, Woodward turbine control and Bently Nevada Vibration system.

2

INDUSTRIAL PROJECTS

In Eraction of CCPP Combine Cycle Power Plant, I have work in commissioning of GE LM-6000 Sprint Type Gas Turbines, Woodward Micrologic control and protection system, GE Thermodyn steam turbine Type 8-11MC9 Woodward 505E Governing and GE Fanuc Control and protection System , Honeywell (DCS), EPKS 301 C-200 Controller Bently Nevada 3500 Vibration and Speed monitoring system. Allen Bradley (BMS) Gaurd, SLC-5, Modicon, Siemens PLC, s, Flowtech Gas Compression station and Water Treatment Instrumentation.

In Fauji Fertilizer Company Ltd. I have also performed major role of up gradation and commissioning of Control system, Baily 7000 to Centum CS 3000 DCS. YOKOGAWA.

Also perform Major activates in Commissioning to Upgrade Tailor control system to Yokogawa(DCS) Centum CS-3000 in Fauji Fertilizer Mirpur Mathelo.

Upgrade and commission the BMS (Boiler Management System) at Auxiliary and Waste heat Boilers. Install Yokogawa Prosafe PLC (Safety control System) at Auxiliary boiler and Yokogawa Prosafe RS (BMS) at Waste heat boilers in FFC.

SKILL IMPROVEMENT TRANINGS

GE Training for LM-6000 Woodward Micrologic Gas turbine control system. GE Mark II and Mark V Gas turbine Control and Protection System. Bently Nevada Vibration and Speed Monitoring systems. Fire and Gas Monitoring and Protection system, Fire Fighting system. Yokogawa CS-3000 DCS Training. Honeywell C-200 PKS and TDC-3000 DCS system. Prosafe and Prosafe RS (BMS) Yokogawa PLC, s. Control Valve and PSV, maintenance and Calibration. Instrument and pneumatic tubing.

GAS TURBINES EXPERIENCE

Work on General Electric Aroderivative LM-6000PC sprint type and MS-5001P Gas turbines.I have expertise on Woodard (Micronet), GE Mark II and Mark V Control and protection system,Woodward 505E Governing System, Woodward EM and LQ Digital Fuel valve Drivers.I can interpret different alarms and troubleshoot the system’s hardware and software problems accordingly.Worked on these systems,

Over Speed and Over Temperature Protection. Gas Governing and Control System Vibration monitoring and protection System Flame and Ignition System Det-Tronics Fire and Gas Detection System. Field Instrumentation. Black Start up system.

INDUSTRIAL INSTRUMENTATION EXPERIENCE

3

Programmable Logic controllers:

I have worked and troubleshoot following systems:

Prosfe RS, Prosafe Koyo, Siemens G.E Fanuc Allen Bradley, Guard Hima Telemecanique, Modicon Carlogawzi relay logic. Honeywell (FSC) fail safe control

Distributed Control System:

I have exposure to the configuration and troubleshooting of:

Centum CS 3000 Yokgawa Distributed Control System. Honeywell EPKS 301 DCS C-200 Controller. Honeywell TDC-3000 Distributed Control System. Foxboro SPEC 200 Control System. Baily 7000 Control System

Field Instrumentation:

I have years of work experience on following systems:

Hart, Smart and Electronics Transmitters. Bently Nevada 3500, 3300, 7200 Vibration Monitoring and Protection system. Control valves of miscellaneous manufacturers and in many sizes. Control valve Positioners Field view (Rosemount), Electronics and Pneumatics. Pressure safety valves (PSV, PRV) Thermocouples, RTD,Thermisters and Thermometers Pressure, temperature, Flow, level Measuring Instruments. Flame monitoring ,Fire and Gas Detection system. Variety of other instrumentation including: Relays, Barriers and Power Supplies. Vortex, Turbine, Magnetic and Target Flow Transmitters. Radar, Ultrasonic, Capacitance and Proxy Level Transmitters and switches. Conductivity, PH, ORP, CO, CO2, Infrared, Paramagnetic, Zirconium and Dissolve

Oxygen, Process Analyzers. Gas Chromatograph (Danalyzer GC-570 with 2350A controller and (ABB Vista 3100). Pneumatic, electronic controllers and Recorders. Fluke Test Equipments. Pneumatic and Electronic. Hart Communicators Rosemount (275, 375)

COMPUTER PROFICIENCY

Good working knowledge of Windows XP Professional and resolve common problems.

4

Working on VISIO Professional and Microsoft OFFFICE. A good working Experience on 10/100 Mbps Local Area Networks and Troubleshooting

common network problems

EDUCATIONAL QUALIFICATIONS

DAE (Instrumentation and control Technology) Passed in May 1998 Jama Millia Polytechnic Institute 1st division Karachi Pakistan

B-Tech (Electronics) Passed Dec 2008Indus Institute of Higher Education Karachi 1st Division

Graduation. Passed in 1998 B Com from Karachi University 2 nd division. Pakistan

Matriculation Passed in April 1994 Metric with Electronics (TSC) from 1st Division

Jama Millia Polytechnic Institute Karachi. Pakistan.

Computer QualificationDiploma of information Technology from Passed in 2000Institute of Information Technology. Excellent.

PERSONAL INFORMATION

Date of birth 14th April 1979 Sex Male Marital status Married Father’s name Talib Hussain Nationality Pakistani Religion Muslim NIC No 42201-0403569-3 Permanent Address MC-1165 Green Town Karachi -43 Pakistan.

5