8 june 2006a.ciocio - sctsg1 status of type iv cables cables production –resumed in february after...
If you can't read please download the document
DESCRIPTION
8 June 2006A.Ciocio - SCTSG3 Type II/III & PP1 – Production INEO/Thurmelec are making type II-III cables in 2 steps: 1.double length harnesses as they receive information about the lengths type II cable and type III spliced type II FCI/JST connectors on both ends of double harness 2.Single length cables with FCT connector (PP3) are produced when length finalized with test cable measurement from cryostat to PP3 racks sector by sector Delivery rate reached 300 cables/week We are ahead with cable preparation! So far good quality No fatal defect found on some cables (the color coat is gone is some section/pattern but kapton insulation OK) Fatal defect (but repairable) found on 2-3 cables ( Only a few cables failed acceptance PPB1 – clamps, clips, cable tray covers were late, not used yet during installation –Clamp mounting started –Clip under production PPF1 – most parts available –Found the best way to crimp group of drain wires in a ferrule and catch the ferrule with the grub screws into clamp’s holesTRANSCRIPT
8 June 2006A.Ciocio - SCTSG1 Status of Type IV Cables Cables production resumed in February after 3 months stop See ID week February 06 Delivery of doubles harnesses completed (April) 2125 double harnesses (4250 cables) Installation All racks in US side + 2 USA racks were installed last year by TC Russian teams Installation resumed at the end of March with a new TC team (French) Very slow startup, safety issues, wrong usage of labels, mistakes Completion of USA side was expected by the end of May But