8.0 options

8.0 OptionsContract end Date 09-30-18

Vendor Name: Altec Industries Inc.Contact Perso Clint BittingStreet Address1255 Port Terminal DriveP.O. Box: NACity, State, ZipDuluth, MN 55403Phone #: 515-240-5342Toll Free #: 877-GO-ALTECFax #: 218-722-6443Email Address [email protected]: www.altec.com

Version of Excel used: 2019

8.0 STORAGE BOXES AND OPTIONS

Make Altec OEM or Other OEM with Altec Installed

WarrantyDate & I.D. of Price List

Discount to be applied to Price List (see note below) 0.00%Installation of storage box and/or option as per MnDOT spec 8.0 $110/hr

Delivery Delivery Starting Point Address

Price per loaded mile for delivery INCLUDED Delivery Time Frame in calendar days ARO 10-270

Shop Rate per HourShop Rate for Mechanical work 110.00$

Body Shop Rate 110.00$ OPTIONS

8-1 Custom Boom Color $3,000.008-2 Custom Body Color $500.008-3 Subbase Storage (NA for AT37G or LR7) $1,269.60

8-4COMPARTMENT LIGHTS installed in Body Compartments (LED Rope Style) (Per Compartment) $216.00

8-5PURE SINE WAVE INVERTER.1800 Watts Continuous. 100-VAC Outlet at Rear of Body. $1,976.40

8-6 PURE SINE WAVE INVERTER.2400 Watts Continuous. GFCI Outlet at Rear. $2,356.80


8-8 Cone Holder installed $140.408-9 4 corner strobe lighting installed $552.008-10 120 volt outlet installed $210.008-11 Lower tool circuit $346.808-12 Remote Controlled Spotlight installed $652.208-13 4" round cargo light installed $175.208-14 4" round grommet mounted strobe light installed $312.008-15 LED work light installed $116.408-16 Directional Light Bar installed $747.60

8-17PD18 Front bumper winch package( only avialable on TA, AN, and LR7 units) installed $6,921.60

8-18 Platform leveling at lower controls $350.008-19 Glad Hands installed $144.008-20 Dock Bumpers installed $145.20

08/21/2020-MNOPTIONS

INCLUDED WITH AERIAL

1 year

mailto:[email protected]

http://www.altec.com/

8-21 PTO Hour Meter installed $132.008-22 Set of 3 Compartment hooks $82.808-23 Standard compartment shelf $117.608-24 3x3 equipto drawer kit installed $403.208-25 Full width pullout drawer installed $198.00

8-26 Top opening Aluminum treadplate box with gas props 3ft long or less, installed $1,117.20

8-27 Top opening Aluminum treadplate box with gas props 3ft-6ft long, installed $1,333.20

8-28 Top opening Aluminum treadplate box with gas props greater than 6ft long, installed $1,900.808-29 Underslung storage box, aluminum treadplate, drop down door $1,173.608-30 Custom control handle configuration $100.008-31 Throttle Control $300.008-32 12,0000lb electric winch for AT $2,965.208-33 Cold Weather oil (per gallon) $32.408-34 Back up camera installed $840.008-35 D-rings, installed $192.008-36 E-track installed per foot $12.008-37 FRAME MOUNTED Hydraulic Tank $1,800.008-38 DELETE FALL PROTECTION HARNESS/LANYARD -$250.008-39 Platform Elevator $3,646.008-40 CUSTOM SMALLER BODY ILO STANARD FOR LR7-RM -$2,660.008-41 DELETE PLATFORM ACCESS -$2,210.008-42 T-BAR $400.00

8-43HYDRAULIC PLATFORM TILT, 90 DEGREE ROTATOR, AND 24X30 PLATFORM FOR LR7 MODELS $9,143.00

8-44 NON-SKID PAINT $15/SQFT8-45 CUSTOM BODY FOR AT PRODUCT $3,500.008-46 CUSTOM BODY FOR TA/ AN/ AM PRODUCT PRODUCT $5,500.008-47 ADD VETRICAL COMPARTMENT $200.008-48 ADD HORIZONTAL COMPARTMENT $300.008-49 DELETE VETRICAL COMPARTMENT -$200.008-50 DELETE HORIZONTAL COMPARTMENT -$300.008-51 ADD UNDERSLUNG COMPARTMENT $650.008-52 Biodegradable Hydraulic Oil (Per Gallon) $39.008-53 WATER CASK (Includes Bracket) $206.00

8-54

COMPLETE 9' CROSS-ARM ASSEMBLY. Includes One (1) 9'x3" Cross-arm, Swivel Support, Brace Pole, Two (2) Brace Clamps, and Three (3) Four Way Conductor Holders $1,677.00

8-55 Cab Guard $2,858.008-56 Category A Dielectric Rating $15,117.008-57 Cone Holder, Fold Over Post Style $277.00

8-58 Dica Pads and Pad Holder - 24" x 24" x 1", With Rope Handle (Pair) $633.00

8-59DRILL AUGER SET for UT57 Includes Four (4) 18” Long Augers in Sizes of 9/16”, 11/16”, 13/16”, 15/16” $250.00

8-60GAS POWERED GENERATOR. Honda 3000 Watt with cover, Recoil Start. Attached to Vehicle with Pins for Easy Removal. $2,467.00

8-61

HOSE REEL. Spring Loaded for Mounting 25’ Conductive Hoses with HTMA Quick Couplings that Come with the Lower Tool Circuit. When it is an available option, Lower Tool Circuit Must be Ordered Separately. $1,392.00

8-62 2YEAR EXTENDED WARRANTY $2,532.008-63 5YEAR EXTENDED WARRANTY $5,495.00

8-64 JEMS S Automatically eliminates engine idle for work trucks and non ePTO aerials. $17,550.00

8-65JEMS SE Plug-in ePTO solution that automatically eliminates engine idle. SE can be paired with the Altec LR7, AT-G, and AT-ME/PE models. $21,900.00

8-66JEMS LE Plug-in ePTO solution that automatically eliminates engine idle. LE can be paired with the Altec LR, AM/E, AA/E, AN/E, and TA aerial models. $36,750.00

8-67 JEMS Engine-off air conditioning $4,450.008-68 JEMS Mobile / Jobsite Charge $4,850.008-69 Ladder Rack $1,086.008-70 LOWER TOOL CIRCUIT $374.00

8-71 MULTIPLE CONDUCTOR ROLLER. Attaches to End of Jib for Lifting Phases. $492.00

8-72JIB ADAPTER. Jib adapter is for Altec 4.1" x 4.1" Square Jibs (Square to Round Conversion) $580.00

8-73 NY State DOT lighting package $9,106.008-74 Hydraulic Oil Cooler, Single Fan $438.00

8-75Hydraulic Oil Heater, 12V, Adjustable Temperature Range With Programmable Controller $1,455.00

8-76 EXTRA MANUAL $88.00

8-77 PURE SINE WAVE INVERTER.1800 Watts Continuous. GFCI Outlet at Rear $2,551.00


8-79 PURE SINE WAVE INVERTER.3000 Watts Continuous. GFCI Outlet at Rear. $3,076.008-80 RADIO REMOTE CONTROLS (Required with Platfrom) $10,929.00

8-81 COMPARTMENT LIGHTS in Body Compartments - Rope LED (Per Compartment) $148.00

8-82Radial Outriggers, Folding Shoe, 164 Inch Max Spread (Only Available for D2000, D3000, and D4000 Digger Derricks) $2,551.00

8-83 Rear Window Guard $271.00

8-84

AERIAL DEVICES AND DIGGER DERRICKS. (1) Day Basic Operator Training Class, Up to 15 Students. Good for Anywhere in the United States. Must be Scheduled at Least 3 months in Advance. Does not include instructor travel. $2,425.00

8-85

CRANES. (2) Day Basic Operator Training Class, Up to 15 Students. Good for Anywhere in the United States. Must be Scheduled at least 3 Months in Advance. Does not include instructor travel. $4,850.00

8-86 COMPARTMENT LIGHTS in Body Compartments - Strip LED (Per Compartment) $148.00

8-87

SOCKET SET for UTS6. Includes Eleven (11) 12-Point Sockets in Sizes of 1" 5/16, 1" 3/8, 1" 7/16, 1" 1/2, 1 "9/16, 1" 5/8, 1" 11/16, 1" 3/4, 1" 13/16, 1" 7/8, 2". All Sockets to be 3/4” Drive. $255.00

8-88ONE (1) POST-MOUNTED SPOTLIGHT. Mounted on Driver’s Side of Chassis. Controls are Extended in Cab for Ease of Operation. $323.00

8-89TWO (2) POST-MOUNTED SPOTLIGHTS. Mounted One (1) on Each Side of the Chassis. Controls are Extended in Cab for Ease of Operation. $648.00

8-90

TWO (2) DECK-MOUNTED SPOTLIGHTS. Mounted on Boom Support to Illuminate the Cargo Area. Each Light has Individual On/Off Switch and can be Directed Wherever Required. $528.00

8-91 FOUR (4) POINT STROBE SYSTEM (LED) $561.008-92 SIX (6) POINT STROBE SYSTEM (LED) $781.00

8-93 Spotlight, LED, Mounted to Truck, Can Be Directed Wherever Required. $410.00

8-94Remote Spot Light, LED, Permanent Mount, With Wireless Dash Mounted Controls And Programmable Wireless Remote $709.00

8-95TOOL HOLDER FOR PISTOL GRIP CHAINSAW. Slip-On Type for Platform With or Without Liner. Keeps Tool Outside of Platform for Optimum Room. $129.00

8-96

TOOL HOLDER FOR POLE SAW. Attaches to Boom on Aerial Devices to Keep Tool Accessible and Out of Platform. Attaches to Boom by Means of Non-Conductive Straps and Buckles (Two (2) Pieces). $218.00

8-97

TOOL HOLDER FOR CIRCLE SAW. Attaches to Boom on Aerial Devices to Keep Tool Accessible and Out of Platform. Attaches to Boom by Means of Non-Conductive Straps and Buckles (Two (2) Pieces). $212.00

8-98

TOOL HOLDER FOR PRUNER. Attaches to Boom on Aerial Devices to Keep Tool Accessible and Out of Platform. Attaches to Boom by Means of Non-Conductive Straps and Buckles (Two (2) Pieces). $212.00

8-99TOOL HOLDER FOR IMPACT WRENCHES AND DRILLS. Clip-On Type for Platform With or Without Liner. Keeps Tool Outside of Platform for Optimum Room. $237.00

8-100

TOOL HOSES. Second Set. 8’ of 3/8” Non-Conductive Orange Hose with Clear Hose Guard on Both Ends. HTMA Couplers Installed Each End. One (1) set of Hoses Come with Vehicle when a Hydraulic Upper Tool is Ordered. $128.00

8-101 MATERIAL HANDLING DELETE -$3,270.00

8-102 TOOL TRAY. Fiberglass, Clips to Outside of Platform With or Without Liner $138.008-103 Backup Camera System $835.008-104 12 Volt Receptacle (Cigarette Lighter Style), Weatherproof $278.00

8-105 120 Volt GFCI Receptacle, Includes Weather-Resistant Enclosure $243.008-106 EXTENDED CAB SHELF $2,540.00

8-107

SPOTLIGHT;PORTABLE MOUNT, SUCTION CUP;MODEL 7901 - WHITE;15' CORD W/CIGARETTE PLUG;5.50 AMPS AVG;CLEAR;WIRELESS HANDHELD REMOTE;RECT.ROTATING-MAGNET BASE;; $306.00

8-108 TELESCOPIC JIB EXTENSION;3.00 IN DIA;36.69 IN L;7 ADJUSTABLE HOLES;;; $506.00

8-109ALTEC YELLOWJIB STORAGE BAG;VINYL BAG WITH SHOULDER STRAP;36.00" X 3.5" DIAMETER;;;; $53.00

8-110CHANCE WIREHOLDER SHEAVE COMBO;FOR 3" DIAMETER ROUND JIB;2.5" OPENING;;; $1,180.00

8-111 CHANCE WIREHOLDER SHEAVE COMBO;FOR 4" SQUARE JIB;;; $1,265.00

8-112 ALTEC SUPPLY TOOL APRON;YELLOW;24" X 24";18 POCKETS;;;; $146.00

8-113KLEIN SIDE CUTTING LIERS;HIGH LEVERAGE;NE-TYPE;9.00 IN JOURNEYMAN;HD CUTTING; $47.00

8-114BW-244 BUG WRENCH;5/8" x 9/16" & 5/18" x 3/4";HEAVY DUTY;INSULATED HANDLE;FORGED CONSTRUCTION;REVERSING, 12 PT;; $47.00

8-115 CONNEXUS STYLE JIB ATTACHMENT $1,210.008-116 GREENLEE RATCHETING ACSR CUTTERS $647.00

8-117 GREENLEE HEAVY DUTY RATCHET GUY WIRE CUTTERS;;;FAIRMONT 758;; $756.008-118 Toe Space Platform $1,100.00

8-119BURNDY MD6 CRIMPING TOOL;PERMANENT "D3" & "BG" GROOVES;9,000 LBS OF CRIMPING FORCE;25 3/8" LONG;; $377.00

8-120

BURNDY MD6-8 CRIMPING TOOL;PERMANENT "D3" & "O" GROOVES;25 3/8" LONG;9,000 LBS OF CRIMPING FORCE;BENT HARDWOOD HANDLES;WITHOUT FIXED NOSE DIE $377.00

8-121 1 1/2 TON LINCOLN STRAP HOIST;;;;;;; $280.00

8-122

PELICAN PROGEAR ELITE COOLER;ICE CHEST SERIES;7-10 DAY ICE RETENTION;45 QUART; WHITE;INT. 19"L X 12" W X 12"D;EXT. 29.66"L X 20"W X 19.25"D;35.8 LBS.; $238.00

8-123 TRACKS FOR 41' 48' AERIAL, DELETE BODY , ADD TRAILER $84,831.00

8-124

PELICAN PROGEAR ELITE COOLER;ICE CHEST SERIES;7-10 DAY ICE RETENTION;35 QUART;WHITE;INT.15.75"L X 12"W X 11.50"D;EXT. 26.41"L X 20"W X 18.75"D;32.28 LBS.; $219.00

8-125 S HOOK;COMPOSITE;FITS ALL STANDARD BUCKETS;;;;SOLD IN PAIRS $29.00

8-126HEAVY REINFORCED CANVAS BUCKET;ROUND BUCKET, ROPE SWIVEL SNAP;12" DIAMETER X 15" HIGH;;;;; $56.00

8-127HEAVY REINFORCED CANVAS BUCKET;OVAL TOOL BUCKET;14" X 7" X 9";16 INSIDE POCKETS;13 OUTSIDE POCKETS;;;THIRTEEN INSIDE POCKETS $95.00

8-128 ORANGE VINYL TOOL BAGS;STANDARD;24" LONG X 10" WIDE X 18" HIGH;;;;; $92.008-129 SPECIAL BOX $110.00

8-130 IMPACT DRILL BIT;QUICK CHANGE CHUCK;18" LONG;9/16" DIAMETER;; $29.008-131 PLATFROM LIGHTING SYSTEM ON COMPATIBLE UNITS $911.00

8-132

SUPERSQUEEZE WOOD POLE FALL;RESTRICTION DEVICE;FOR DISTRIBUTION;WEB WOVEN INNER STRAP;HOOKS ON WOVEN;STRAP; MODEL 488W2Q3;; $625.00

8-133POLE FALL RESTRAINT;SUPERSQUEEZE;WITH WEB INNER STRAP;AND WEBGRAB ADJUSTMENT;; $605.00

8-134SUPERSQUEEZE WOOD;POLE FALL RESTRICTION;FOR DISTRIBUTION;ROPE INNER STRAP;SNAP HOOKS ON WOVEN STRAP;;MODEL 488RQ4;; $639.00

8-135 ROPE LANYARD;BUCK-A-JUSTER;;8 FT L;WITH BUCKGRAB; $278.008-136 MOVE ACCESS STEPS TO CUSTOM LOCATION $158.00

8-137STANLEY ID07 IMPACT DRILL;HYDRAULIC;WITHOUT TRIGGER GUARD;QUICK CHANGE 7/16 IN CHUCK;4 - 12 GPM;750-2000 PSI $732.00

8-138 DEEP CUT SHIP AUGER BIT; 11/16" DIA X 18" LONG; WOOD OWL 08808;;; $48.00

8-139 DEEPCUT UTILITY POLE AUGER BIT; 18" X 13/16"; WOOD OWL BIT 08810;;; $50.00

8-140WOODOWL 08812 DRILL BIT; IMPACT; QUICK CHANGE; 18" LONG; 15/16" DIAMETER; $56.00

8-141 TRACKS FOR 37' AERIAL, ADD AUGER , DELETE BODY , ADD TRAILER DB37 $84,900.00

8-142 Burndy HIW716MAG IMPACT WRENCH;STANDARD TORQUE;;;;;; $1,069.00

8-143UHPP – Hydraulic pole puller. Used to pull poles for replacement.Comes with 7’ of 1/2” high tensile chain and a base. Powered bylower tool circuit at 8 gpm. $1,502.00

8-144

UHT – Hydraulic tamp. With kidney-shaped head used for back-filling a pole hole. Comes with 3’ hose whips and a 3’ handle. Powered by lower tool circuit at 8 gpm. Provides 1600 blows perminute with a 2 1/2” stroke. $2,177.00

8-145UTS1 – Hydraulic chainsaw, pistol grip. Dual-spool (will work oneither an open center or closed center system) 15” cutting capacitystandard other lengths available. $1,524.00

8-146

UTS2 – Hydraulic pole saw. Featuring fiberglass poles and automatic chain oiling. Dual-spool (will work on either an opencenter or closed center system) 15” bar 5’ handle. No other lengthbar is available. $1,664.00

8-147

UTS3 – Hydraulic circle saw. Featuring fiberglass pole and angled head and special trigger guard that de-activates the saw if removed.Dual-spool (will work on either an open center or closed centersystem) 9” diameter blade. $1,841.00

8-148

UTS4 – Hydraulic pruner. Overall length of 84” with a cuttingcapacity of 2 1/4”. Pruner has a special trigger guard that de-activates the pruner if removed. This tool is dedicated or will onlywork on open or closed system. $1,376.00

8-149 TWO MAN 24X48 PLATFROM FOR AT MODEL, DELETE 24X30 $690.00

8-150

UTS6 – Hydraulic impact wrench. Maximum output torque of upto 1200 ft/lbs. comes with 3/4” square drive standard. Can be used as drill or as impact. Sockets are available as accessories. This is a dedicated tool and will be matched to the unit system provided. $2,816.00

8-151

UTS7 – Hydraulic drill. Uses standard 1/2” Jacobs chuck, and withthe correct bits handle drilling wood, metal or masonry. Speed andtorque proportional to flow and pressure of tool system. Drill has dual-spool for open and closed center system. $1,924.00

8-152

UTW – Hydraulic impact wrench. Maximum output torque of 400ft/lbs. Comes with 7/16” quick change chuck to 1/2” drive withadapter. Can be used as drill or as impact. Sockets and drill bits are available as accessories. $1,331.00

8-153

ECP – MY-RE Electric capstan package. Includes a 12-VDC utility capstanhoist with lb. single-line and 1600-lb. double-line capacity. Usually mounted on curbside rear of vehicle with drum to outside.Worm gear system for positive load handling. No extended shaft. (Does not Include Accessories) $2,311.00

8-154 CONVERT FIBERGLASS BODY TO ALUMINUM $1,966.00

8-155

MOUNTED HYDRAULIC CAPSTAN. Mounted Curbside on Front Frame Extension Curbside. (NOTE: May Not Be Required if Truck Has Midship Winch with WES Option) $4,846.00

8-156

HYDRAULIC FRONT WINCH. 1-speed. 20,000 lb. (Bare Drum) Capacity, Bumper Package. Planetary Drive Winch with Extended Shaft to Curbside. Bumper Package Includes a Four-Way Roller, Gravel Guard, Access Door, Winch Dog, and Two (2) Tow Eyes. Winch Comes with 150’ of 1/2” Cable with an Eye in One End. Air Controls are Located Inside the Cab and on the Front Winch. $8,287.00

8-157

Braden PD35 Bumper Package, 35,000 LB Planetary Gear Single-Speed Hydraulic Winch With Tool Boxes And RH Extended Shaft. Includes 150' of 3/4 Cable and controls in cab and on bumper. $16,618.00

8-158

CR REEL BAYONET CAPSTAN. 20” Diameter Collapsible Reel for Wire Take Up and a 7” Bayonet Capstan Drum that Fits Any of the Winch Extended Shafts Provided. $1,294.00

8-159 CUSTOM BODY RE-CONFIGURE $900.00

8-160 Aluminum Bayonet Capstan Drum (fits any winch extended shaft) $568.00

9.0 Aerial Units

Vendor Name: Altec Industries Inc.Contact Person: Clint BittingStreet Address: 1255 Port Terminal Drive

P.O. Box: NACity, State, Zip Duluth, MN 55403

Phone #: 515-240-5342Toll Free #: 877-GO-ALTEC

Fax #: 218-722-6443Email Address: [email protected]

Website: www.altec.comVersion of Excel used: 2019

9.0 Aerial UnitsMake

Warranty

Standard warranty:One (1) year parts warranty, one (1) year labor warranty, niety (90) days

Date & I.D. of Price ListDiscount to be applied to Price List (see note below) 0.00%

Options9.01 CVI Inspection NO CHARGE 9.02 Outriggers in lieu of (ILO) torsion bar $ 2,490.00 9.03 AT40G ILO AT37G (includes 2nd torsion bar) $ 6,074.00 9.04 84" CA fiberglass body ILO 60"CA $ 7,995.00 9.05 Change to 60" CA steel body $ (2,500.00)9.06 Change to 84" CA steel body $ (2,500.00)9.07 Body re-configuration $ 900.00 9.08 Toe Space Platform $ 520.00 9.09 AT30G ILO AT37G $ (3,050.00)9.10 Walk through Platform ( on compatible configurations only) $ 1,675.00

DeliveryDelivery Starting Point Address

Price per loaded mile for delivery $ 2.50 Delivery Time Frame in calendar days ARO 10-300

Shop RatesShop Rate for Mechanical work $ 110.00

Body Shop Rate $ 110.00

9.0 ALTEC Model AT37G telescoping/articulating continuous rotation aerial device with an insulating articulating arm, insulating telescopic upper boom, and the patented ISO-Grip insulating system at the boom tip. Includes the following features:

$65,612.00

UnitGround to bottom of platform height: 37.8 feet IncludedWorking height: 42.8 feet IncludedMaximum reach to edge of platform. Side Mounted Platform: 26.6 feet. End Mounted Platform: 28.3 feet (at 14.4 foot platform height).

Included

Telescopic boom extension: 9 feet 8 inches IncludedContinuous rotation IncludedInsulating Aerial Device, ANSI Category C, 46kV and Below Included

AT37G

08/21/2020 MN-AT37G

Elizabethtown, KY



Articulating Arm: Articulation is from -7 to 90 degrees. Insulator provides 12 inches of isolation.

Included

Compensation System: By raising the articulating arm only, the telescopic boom maintains its relative angle in relation to the ground. The work position is achieved through a single function operation.

Included

Telescoping upper boom: Articulation is from -25 to 75 degrees. Included

Master/ Slave Leveling: Platform automatically maintains level during boom articulation through a lifetime master/slave hydraulic leveling system that requires no major preventive maintenance.

Included

The INSULATING UPPER CONTROL SYSTEM includes a single handle controller incorporating high electrical resistance components that is dielectrically tested to 40 kV AC with no more than 400 microampers of leakage. The control handle is green in color to differentiate it from other non-tested controllers.

Included

One set of tool outlets at the platform providing up to 5 gpm of flow for open center tools

Included

Hydraulic System: Open center system operating at 5gpm and 2,400 psi. Included

Unit is painted with a powder coat paint process which provides a finish-painted surface that is highly resistant to chipping, scratching, abrasion and corrosion.

Included

Structural Warranty all of the following applicable major components is to be warranted for so long as the initial purchaser owns the product: Booms, boom articulation links, hydraulic cylinder structures, outrigger weldments, pedestals, subbases and turntables.

Included

Manuals: Two (2) operator and Maintenance/Parts manuals Included

Engine Start/Stop & Secondary Stowage System: 12 VDC powered motor and pump assembly for temporary operation of the unit in a situation wherein the primary hydraulic source fails. Electric motor is powered by the chassis battery. This feature allows the operator to completely stow the booms and platform. Secondary Stowage & Start/Stop is activated with an air plunger at the platform and switch at the lower control station.

Included

Post style pedestal mounting IncludedPoly Hydraulic Reservoir, Pedestal Mounted, 7 Gallon (Includes Sight Gauge) Included

Single, One (1) Man, Fiberglass Platform; End Mounted with 180 degree rotator. 24 x 30 x 42 inches, includes hydraulic tilt.

Included

One (1) Platform Step IncludedSoft nylon reinforced vinyl platform cover for a 24 x 30 inch platform Included

Platform liner for a 24 x 30 x 42 inch platform IncludedPlatform Capacity, 400LBS. Included

Altec Patented ISO-Grip Insulating 4 Function, Proportional Speed, Upper Control Handle - with safety interlock and interlock guard. Forward/back operates upper boom in/out, tiller operates rotation CW/CCW, up/down operates lower boom up/down, and twist operates articulating arm up/down. Platform leveling is controlled with a separate interlocked control handle.

Included

Manual lowering valve located at the boom tip. For use in emergency situations to allow the operator to lower the boom to the ground

Included

Powder coat unit Altec White. IncludedUnit & Hydraulic Acc.HVI-22 Hydraulic Oil (Standard). IncludedStandard Pump For PTO IncludedHot shift PTO for automatic transmission IncludedBodyAltec Osceola IncludedFiberglass body IncludedAltec standard fiberglass body specifications: IncludedMolded fiberglass side compartments IncludedReinforced, double-laminated doors IncludedHeavy duty stainless steel hinges installed on doors Included

Heavy duty strikers installed on body for door latches Included

Automotive-type bulb gasket door seal IncludedCorrosion resistant fasteners and self-locking nuts used throughout Included

Extruded aluminum drip rail IncludedFiberglass bulkheads installed between compartments Included

Drains installed in each compartment IncludedBody to be vented IncludedAerial service line with step (ASLS) IncludedGelcoat finish entire body Altec white Included108 Inch Body Length Included39 Inch Body Height (Standard) Included94 Inch Body Width (Standard) Included20 Inch Body Compartment Depth (Standard) IncludedNo Treadplate On Compartment Tops Included6 Inch tall wood tailboard installed at the rear of body cargo area Included

No Compartment Lighting Supplied by the Body Manufacturer Included

Stainless Steel Rotary Paddle Latch With Lock (Standard) Included

Master Body Locking System (Standard) IncludedNo Chock Holders In Line Body Fender Panel Required (Standard) Included

Gas Shock Type Rigid Door Holders For Vertical Doors (Standard) Included

Cable Holders On Horizontal Doors IncludedHotstick shelf extending full length of body on curbside. Included

Drop-Down Hot Stick Door For One (1) Shelf (Right Side) Included

Two (2) Hot Stick Brackets Included

1st Vertical Street Side (LH) - Two (2) Adjustable Shelf With Removable Dividers On 4 Inch Centers

Included

1st Horizontal Street Side (LH) - One (1) Fixed Shelf With Removable Dividers On 8 Inch Centers

Included

Rear Vertical Street Side (LH) - Six (6) Adjustable Locking Swivel Hooks Included

1st Vertical Curb Side (RH) - Seven (7) Adjustable Locking Swivel Hooks, Louvered Panel Installed in Cargo Wall

Included

1st Horizontal Curb Side (RH) - Vacant IncludedRear Vertical Curb Side (RH) - Two (2) Adjustable Shelf With Removable Dividers On 4 Centers

Included

Aluminum Rock Guards Installed at Bottom Included38" Tailshelf with Integrated Side Access Steps, Two Wheel Chock Holders Included

Body and Chassis AccessoriesICC Underride Protection IncludedCombination 2 Ball (10,000 LB MGTW) And Pintle Hitch (16,000 LB MGTW) Included

Set Of Eye Bolts for Trailer Safety Chain, installed one each side of towing device mount.

Included

Rear Torsion Bar Installed On Chassis IncludedAppropriate counterweight added for stability. IncludedPlatform Rest, Rigid with Rubber Tube IncludedBoom Rest for a Telescopic Unit IncludedMud Flaps (Pair) IncludedWheel Chocks, Rubber with Metal Hairpin Style Handle, (Pair) Included

Slope Indicator Assembly For Machine Without Outriggers Included

Safety Harness And 4.5' Lanyard (Fits Medium To X-large) Includes Pouch and Placards

Included

5 LB Fire Extinguisher With Light Duty Bracket, Ship loose Included

Triangular Reflector Kit IncludedVinyl manual pouch for storage of all operator and parts manuals Included

Electrical Accessories IncludedLights and reflectors in accordance with FMVSS #108 lighting package. (Complete LED, including LED reverse lights)

Included

Standard Amber LED Strobe Light With Brush Guard Post Mounted On Streetside Front Compartment Top

Included

Single tone back up alarm installed between the chassis frame rails at the rear of the chassis. To work in conjunction with chassis reverse drive system

Included

6-Way Trailer Receptacle (Pin Type) Installed At Rear Included

Dash panel rocker switches supplied with Chassis. Auxiliary switches supplied in upfitting package from chassis.

Included

Start/Stop/Throttle Module, 12 Volt System IncludedInstall secondary stowage system IncludedPTO Indicator Light Installed In Cab IncludedFinishing DetailsPowder Coat Unit Altec White IncludedFinish Paint Body Accessories Above Body Floor Altec White Included

Standard; Components mounted below frame rail shall be coated black by Altec. Included

Apply Non-Skid Coating to all walking surfaces IncludedEnglish Safety And Instructional Decals IncludedVehicle Height Placard - Installed In Cab IncludedPlacard, HVI-22 Hydraulic Oil IncludedDielectric test unit according to ANSI requirements. Included

Stability test unit according to ANSI requirements. IncludedInstall on customer supplied chassis Included

9.0 Aerial Units






9.0 Aerial UnitsMake AT41M

Standard warranty:One (1) year parts warranty, one (1) year labor warranty, niety (90) days warranty for travel charges, limited lifetime structural warranty

Date & I.D. of Price List 08/21/2020 MN-AT41MDiscount to be applied to Price List (see note below) 0.00%

Options9.01 CVI Inspection NO CHARGE9.02 Change to AT48 (includes 2nd set of outriggers) 9,516.00$ 9.03 Change to steel body (2,500.00)$ 9.04 Change to Full A-frame outriggers 920.00$ 9.05 Body Compartment re-configure 900.00$

DeliveryDelivery Starting Point Address Creedmoor, NC

Price per loaded mile for delivery 2.50$ Delivery Time Frame in calendar days ARO 10-300

Shop RatesShop Rate for Mechanical work 110.00$

Body Shop Rate 110.00$

9.0 Altec Model AT41M Articulating Telescopic Aerial Device with a fiberglass upper boom and fiberglass insulator in the articulating arm and proportional joystick upper controls. Built in accordance to ALTEC's standard specifications and to include the following features:

$89,571.00

UnitGround to bottom of platform height: 41 feet IncludedWorking height: 46 feet IncludedMaximum reach to edge of platform. Side Mounted Platform: 30.1 feet Included

Continuous Rotation IncludedOutrigger/boom interlock system prevents boom from being unstowed until outriggers have been at least partially deployed

Included

Outrigger/unit selector control is located near the outrigger controls, allows operator to divert hydraulic oil from machine circuit for outrigger operation. This reduces the potential for inadvertent outrigger movement during machine operation if outrigger controls are bumped

Included



Dielectric rating: Category C, 46 kV and below IncludedUnit is painted with a powder coat paint process which provides a finish-painted surface that is highly resistant to chipping, scratching, abrasion and corrosion. Paint is electrostatically applied to the inside as well as outside of fabricated parts then high temperature cured prior to assembly ensuring maximum coverage and protection.

Included

Manuals: Two (2) Operator’s and two (2) Maintenance/ Parts manuals containing instructional markings indicating hazards inherent in the operation of an aerial device.

Included

Unit meets or exceeds ANSI 92.2 standards. IncludedPedestal IncludedSteel Reservoir, 15 gallon capacity, triangular, 17'' L x 17'' W x 24'' H, and includes breather caps and dipsticks

Included

Single 1-Man Platform, Fiberglass (Insulated), 24" x 30" x 42", End Mount, 180 Degree Rotation

Included

Platform Mounted Single Handle Controls IncludedMaterial Handling Jib/Winch, Hydraulically Articulating, Top Mounted, Round (ARM Jib)

Included

One(1) Platform step- located on the side of the platform nearest the elbow in the stowed position

Included

Platform Cover - soft vinyl, 24 x 30 inches (610 x 762 mm) Included

Platform Liner, 24 x 30 x 42 inches (610 x 762 x 1067 mm), 50 kV Rating Included

Hydraulic Tool Circuit at Platform: One set of quick disconnect couplings at the boom tip for open center tools.

Included

Engine Start/Stop and secondary stowage IncludedJib Stick, 36"L, non certifies, grey in color IncludedSlip Ring: required for engine start/stop and secondary stowage IncludedOutriggers, Primary, Modified A-frame with integrated subbase, 30"-34" chassis height, 114" spread, fixed shoes

Included

Electric Outrigger Controls, drive hydraulic outrigger control valves. Durable weather proof sealed electronic switches mounted in aluminum boxes located at the rear of the unit unless otherwise specified.

Included

Fall Protection System to include one body harness and decelerating type lanyard.

Included

Lifting Eye - lifting eye at outer end of lower boom. Rated at 1,000lbs (454kg) lifting capacity

Included

Winch load line swivel hook IncludedAltec Aerial Device Powder Painted White IncludedUnit & Hydraulic Acc.HVI-22 Hydraulic Oil (Standard) IncludedStandard Pump For PTO IncludedElectric Shifted PTO IncludedStandard PTO/Transmission Functionality for Small Ford and Dodge Chassis

Included

BodyAltec Osceola Included

Fiberglass body IncludedAltec standard fiberglass body specifications: IncludedMolded fiberglass side compartments IncludedReinforced, double-laminated doors IncludedHeavy duty stainless steel hinges installed on doors IncludedHeavy duty strikers installed on body for door latches IncludedAutomotive-type bulb gasket door seal Included

Corrosion resistant fasteners and self-locking nuts used throughout IncludedExtruded aluminum drip rail IncludedFiberglass bulkheads installed between compartments IncludedDrains installed in each compartment IncludedBody to be vented Included132'' Body Length Included94'' Body Width Included39'' Body Compartment Height Included20'' Body Compartment Depth Included24'' From Body Floor To Compartment Tops Included2 x 6 inch drop-in composite retaining board at rear of body. Included2 x 6 inch drop-in composite retaining board at side access step. IncludedStainless Steel Rotary paddle Latches With Locks IncludedGas Props On All Vertical Doors IncludedCable Holders On All Horizontal Doors IncludedStandard Master Body Locking System IncludedHotstick Shelf Extending Full Length Of Body On Streetside IncludedTwo (2) Hotstick Brackets On Streetside IncludedOne Chock Holder On Each Side of Body With Retaining Lip In Fender Included1st Vertical (SS) - 34'' W - One (1) Outrigger Housing And Two (2) Adjustable Shelves With Removable Dividers On 4 Inch Centers

Included

2nd Vertical (SS) - 24'' W - Two (2) Adjustable Shelves With Removable Dividers On 4 Inch Centers

Included

1st Horizontal (SS) - 50'' W - One (1) Fixed Shelf With Removable IncludedRear Vertical (SS) - 24'' W - Six (6) Locking Swivel Hooks On An Included1st Vertical (CS) - 34'' W - One (1) Outrigger Housing And Two (2) Included2nd Vertical (CS) - 24'' W - Gripstrut Access Steps With Two (2) Sloped Grab Handles, Vented Battery Storage

Included

1st Horizontal (CS) - 50'' W - One (1) Adjustable Shelf With Removable IncludedRear Vertical (CS) - 24'' W - Six (6) Locking Swivel Hooks On An IncludedBody Floor Cut-Out For AT41M Aerial Device Near Front Of Body Included

Aluminum Tailshelf, 29'' L x 94'' W, With Rear Cross Storage And Drop Down Doors

Included

Body and Chassis Accessories IncludedICC Underride Protection IncludedT-60 Style Pintle Hitch (10,000 LB MGTW with 2,000 LB MVL) IncludedSet Of Eye Bolts for Trailer Safety Chain, installed one each side of towing IncludedRigid Step Mounted Beneath Side Access Steps (Installed To Extend IncludedPlatform Rest, Rigid with Rubber Tube IncludedBoom Rest for a Telescopic Unit IncludedWood Outrigger Pad, 19'' x 19'' x 2.5'', With Rope Handle IncludedOutrigger Pad Holder, 20" L x 20" W x 5" H, Fits 19.5" x 19.5" x 4" And IncludedPendulum Retainers For Outrigger Pad Holders IncludedMud Flaps (Pair) IncludedWheel Chocks, Rubber with Metal Hairpin Style Handle, (Pair) IncludedSlope Indicator Assembly For Machine Without Outriggers Included5 LB Fire Extinguisher With Light Duty Bracket, Ship loose IncludedTriangular Reflector Kit IncludedVinyl manual pouch for storage of all operator and parts manuals IncludedElectrical AccessoriesLights and reflectors in accordance with FMVSS #108 lighting package. IncludedStandard Amber LED Strobe Light With Brush Guard Post Mounted On Streetside Front Compartment Top

Included

Dual Tone Back-Up With Outrigger Motion Alarm IncludedPTO Hour Meter, Digital, with 10,000 Hour Display Included6-Way Trailer Receptacle (Pin Type) Installed At Rear IncludedElectric Trailer Brake Controller (Tekonsha Voyager #9030) Included

Dash panel rocker switches supplied with Chassis. Auxiliary switches supplied in upfitting package from chassis.

Included

Start/Stop/Throttle Module, 12 Volt System IncludedInstall secondary stowage system. IncludedInstall Remote Start/Stop system in Final Assembly IncludedInstall Outrigger Interlock System IncludedPTO Indicator Light Installed In Cab IncludedFinishing DetailsPowder Coat Unit Altec White IncludedFinish Paint Body Accessories Above Body Floor Altec White IncludedStandard; Components mounted below frame rail shall be coated black by Altec.

Included

Apply Non-Skid Coating to all walking surfaces IncludedEnglish Safety And Instructional Decals IncludedVehicle Height Placard - Installed In Cab IncludedPlacard, HVI-22 Hydraulic Oil IncludedDielectric test unit according to ANSI requirements. IncludedStability test unit according to ANSI requirements. IncludedInstall on customer supplied 84”CA chassis Included

9.0 Aerial UnitsVendor Name: Altec Industries Inc.

Contact Person: Clint BittingStreet Address: 1255 Port Terminal Drive






Warranty Standard warranty:One (1) year parts warranty, one (1) year labor warranty, niety (90) days warranty for travel charges, limited lifetime structural warranty

Date & I.D. of Price List 8/21/2020 MN-TA50Discount to be applied to Price List (see note below) 0.00%

Options9.1 CVI Inspection NO CHARGE9.2 Change to TA55ARM (includes 2nd set of outriggers) 11,293.00$ 9.3 Change to TA60ARM (includes 2nd set of outriggers) 15,249.00$ 9.4 Change to Steel Body (2,500.00)$ 9.5 Body Compartment re-configure 900.00$ 9.6 Automatic Upper Boom Latch 850.00$ 9.7 Add Aux outriggers 2,237.00$

DeliveryDelivery Starting Point Address St. Joseph, MO




9.0 Altec Model TA50 Articulating Telescopic Aerial Device with a fiberglass upper boom and fiberglass insulator in the articulating arm and a proportional joystick upper control and toggle switches. Built in accordance to ALTEC's standard specifications and to include the following features:

$133,633.00

UnitGround to bottom of platform height: 50 feet IncludedWorking height: 55 feet IncludedMaximum reach to edge of platform. Side Mounted Platform: 36.2 feet IncludedContinuous Rotation IncludedOutrigger/boom interlock system prevents boom from being unstowed until outriggers have been at least partially deployed

Included


Included




Included


Included

Unit meets or exceeds ANSI 92.2 standards. IncludedManual Upper Boom Stow Securing SystemPedestal IncludedTwo-Man Platform (24"x48"x42") with hydraulically articulating jib (Altec ARM Jib) - Platform end mounted, rotates 180 degrees around boom tip. Platform has a capacity of 600lbs without liner. Material handling system comes with 80ft of 0.50 inch polyester double braid rope, a metal thimble in the working end and jib rated at a maximum capacity of 1,000 lbs

Included

Platform Mounted Single Handle Controls IncludedMaterial Handling Jib/Winch, Hydraulically Articulating, Top Mounted, Round (ARM Jib) Included


Included

Platform Cover - soft vinyl, 24 x 48 inches IncludedPlatform Liner, 24 x 48 x 42 inches , 50 kV Rating IncludedTool Circuit At Boom Tip, Dual Hydraulic IncludedEngine Start/Stop and secondary stowage IncludedOutrigger A-Frame with Flat-shoe - provides 149 inch maximum spread outside to outside of shoe

Included

Electric Outrigger Controls, drive hydraulic outrigger control valves. Durable weather proof sealed electronic switches mounted in aluminum boxes located at the rear of the unit unless otherwise specified.

Included

Winch load line swivel hook IncludedAltec Aerial Device Powder Painted White IncludedUnit & Hydraulic Acc.Reservoir, 25 Gallon, Sloped, Mounted in Cargo Area IncludedTA Series Subbase IncludedHVI-22 Hydraulic Oil (Standard) IncludedStandard Pump For PTO IncludedHot shift PTO for automatic transmission IncludedMuncie PTO IncludedStandard PTO/Transmission Functionality for Automatic Transmissions -If chassis is in gear, and PTO switch is activated, PTO will not engage. Chassis will remain in gear. Once the chassis is shifted back into gear the PTO will disengage. For some truck configurations the PTO switch must be turned off to allow the transmission to shift into gear.

Included

BodyAltec Osceola IncludedFiberglass body IncludedAltec standard fiberglass body specifications: IncludedMolded fiberglass side compartments IncludedReinforced, double-laminated doors IncludedHeavy duty stainless steel hinges installed on doors IncludedHeavy duty strikers installed on body for door latches IncludedAutomotive-type bulb gasket door seal IncludedCorrosion resistant fasteners and self-locking nuts used throughout IncludedExtruded aluminum drip rail IncludedFiberglass bulkheads installed between compartments IncludedDrains installed in each compartment IncludedBody to be vented IncludedAerial service line with step (ASLS) Included

Gelcoat finish entire body Altec white Included160 inch overall body length. Included94 inch overall body width. Included48 inch overall body height. Included18 inch body compartment depth. Included2 x 6 inch drop-in composite retaining board at rear of body. Included2 x 6 inch drop-in composite retaining board at side access step. IncludedStainless Steel Rotary Paddle Latches With Keyed Locks IncludedAll Locks Keyed Alike Including Accessories (Preferred Option) IncludedStandard Master Body Locking System, For Use With An Access Step IncludedGas Shock (Gas Spring) Rigid Door Holders On All Vertical Doors IncludedOne Chock Holder On Each Side of Body With Retaining Lip In Fender Panel IncludedFiberglass Hotstick Shelf Extending Full Length Of Body On Streetside IncludedTwo Hotstick Brackets On Streetside IncludedStandard Drop-Down Fiberglass Hotstick Door For One (1) Shelf On Streetside, Stainless Steel Slam Paddle Latch With Keyed Lock

Included

3/16" Aluminum Treadplate Floor Included4" Steel Channel Body Frame IncludedBolt Down Aluminum Floor To Steel Frame Included1st vertical streetside (LH) - Six (6) locking swivel hooks on adjustable rails. 2-2-2 configuration.

Included

2nd vertical streetside (LH) - Six (6) locking swivel hooks on adjustable rails. 2-2-2 configuration.

Included

3rd vertical streetside (LH) - Six (6) locking swivel hooks on adjustable rails. 2-2-2 configuration.

Included

1st horizontal streetside (LH) - One (1) adjustable shelf with removable dividers on 4 inch centers.

Included

Rear vertical streetside (LH) - Two (2) adjustable shelves with removable dividers on 4 inch centers.

Included

1st vertical curbside (RH) - Two (2) adjustable shelves with removable dividers on 4 inch centers.

Included

2nd vertical curbside (RH) - Gripstrut access steps with two (2) sloped grab handles. Included3rd vertical curbside (RH) - Six (6) locking swivel hooks on adjustable rails. 2-2-2 configuration.

Included

1st horizontal curbside (RH) - Two (2) adjustable shelves with removable dividers on 8 inch centers.

Included

Rear vertical curbside (RH) - Six (6) locking swivel hooks on adjustable rails. 2-2-2 configuration.

Included

Curbside compartment top access step installed in the cargo area behind side access step.

Included

29 inch long x 94 inch wide aluminum tailshelf, two (2) U-shaped grab handles, installed at rear of body.

Included

Aluminum Tailshelf, 29'' L x 94'' W, With Rear Cross Storage And Drop Down Doors IncludedBody and Chassis AccessoriesICC Underride Protection IncludedT-125 Style Pintle Hitch (30,000 LB MGTW with 6,000 LB MVL) IncludedSet Of Eye Bolts for Trailer Safety Chain, installed one each side of towing device mount.

Included

Rigid Step Mounted Beneath Side Access Steps (Installed To Extend Approx. 2'' Outward)

Included

Platform Access Step From Body Floor IncludedPlatform Rest, Rigid with Rubber Tube IncludedBoom Rest for a Telescopic Unit IncludedWood Outrigger Pad, 19'' x 19'' x 2.5'', With Rope Handle IncludedOutrigger Pad Holder, 20" L x 20" W x 5" H, Fits 19.5" x 19.5" x 4" And Smaller Pads, Bolt-On, Bottom Washout Holes, 3/4" Lip Retainer

Included

Pendulum Retainers For Outrigger Pad Holders IncludedMud Flaps (Pair) IncludedWheel Chocks, Rubber with Metal Hairpin Style Handle, (Pair) IncludedSlope Indicator Assembly For Machine Without Outriggers Included

5 LB Fire Extinguisher With Light Duty Bracket, Ship loose IncludedTriangular Reflector Kit IncludedFall Protection kit IncludedVinyl manual pouch for storage of all operator and parts manuals IncludedElectrical AccessoriesLights and reflectors in accordance with FMVSS #108 lighting package. (Complete LED, including LED reverse lights)

Included


Included

Dual Tone Back-Up With Outrigger Motion Alarm IncludedAltec Standard Multi-Point Grounding System IncludedCopper U Shaped Grounding Lug (Threaded) Installed on CS front and rear Included7-Way Trailer Receptacle (Pin Type) Installed At Rear IncludedElectric Trailer Brake Controller (Tekonsha Voyager #9030) IncludedStart/Stop/Throttle Module, 12 Volt System IncludedInstall secondary stowage system. IncludedInstall Remote Start/Stop system in Final Assembly IncludedInstall Outrigger Interlock System IncludedAltec Modular Panel System (AMPS) - Includes Mounting Panel and Accessory Switches

Included

Finishing DetailsPowder Coat Unit Altec White IncludedFinish Paint Body Accessories Above Body Floor Altec White IncludedStandard; Components mounted below frame rail shall be coated black by Altec. IncludedApply Non-Skid Coating to all walking surfaces IncludedEnglish Safety And Instructional Decals IncludedVehicle Height Placard - Installed In Cab IncludedPlacard, HVI-22 Hydraulic Oil IncludedDielectric test unit according to ANSI requirements. IncludedStability test unit according to ANSI requirements. IncludedInstall on customer supplied 84”CA chassis Included

9.0 Aerial Units

Vendor Name: Altec Industries Inc.ontact Person: Clint Bittingtreet Address: 1255 Port Terminal Drive





9.0 Aerial UnitsMake Altec AN55E-OC

Warranty

Standard warranty:One (1) year parts warranty, one (1) year labor warranty, niety (90) days warranty for travel charges, limited lifetime structural warranty

Date & I.D. of Price List 8/21/2020 MN-AN55E-OCDiscount to be applied to Price List (see note below) 0.00%

Options9.1 CVI Inspection NO CHARGE 9.2 AN46E-OC $ (2,425.00)9.3 Change to AN50E-OC $ (1,210.00)9.4 Change to steel body $ (2,500.00)9.5 Body Compartment re-configure $ 925.00

DeliveryDelivery Starting Point Address Ronaoke, VA

Price per loaded mile for delivery $ 2.50 Delivery Time Frame in calendar days ARO 10-300

Shop RatesShop Rate for Mechanical work $ 110.00

Body Shop Rate $ 110.00

9.0 Altec Model AN55E-OC Articulating Overcenter Aerial Device with a fiberglass upper boom and fiberglass insulator in the lower boom and a proportional joystick upper control and toggle switches. Built in accordance to ALTEC's standard specifications and to include the following features:

$138,918.00

UnitGround to bottom of platform height: 55 feet IncludedWorking height: 60 feet IncludedMaximum reach to edge of platform. 43.1 feet IncludedContinuous Rotation IncludedOutrigger/boom interlock system prevents boom from being unstowed until outriggers have been at least partially deployed

Included


Included

Dielectric rating: Category C, 46 kV and below Included



Unit is painted with a powder coat paint process which provides a finish-painted surface that is highly resistant to chipping, scratching, abrasion and corrosion. Paint is electrostatically applied to the inside as well as outside of fabricated parts then high temperature cured prior to assembly ensuring maximum coverage and protection.

Included


Included

Unit meets or exceeds ANSI 92.2 standards. IncludedAutomatic upper boom stow system IncludedPedestal IncludedTwo-Man Platform (24"x48"x42") Platform is rated at 700 pounds (317.5 kg) and rotates 90 degrees to end of boom. Includes two sets of quick disconnect couplings and controls for hydraulic tools. Includes hydraulically articulating and extending material handling jib with winch and rope mounted on opposite side of upper boom.--Material handling jib capacity is in addition to platform capacity. Jib and winch system includes hydraulic tool lines in boom to furnish 8.0 gpm at 2,000 psi (30.3 lpm/13 800 kPa) and includes:Material handling, hydraulically articulated jib, -30 degree to +90 degree tilt angle (relative to the upper boom). Jib also extends from 43 to 67 inches ( 1092 x 1702 mm) in five pinning positions.One (1) piece 4.0 inch (101.6 mm) square jibHydraulically powered winch rated to 2,000 pounds (907.2 kg) full drum, mounted on the side of the upper boom80 feet of 7/16 inch (24.4 m of 11.1 mm) double-braided synthetic ropeControl valves at platform for hydraulic tools, platform rotation, jib tilt, jib extend and winch controlAuxiliary winch line control valve and platform rotation valve at the turntable to allow rescueValve at boom tip relieves pressure from quick disconnect couplings in Off position. Open-center or closed-center tools may be operated from tool circuitFiberglass covers

Included

Primary Outrigger X-Frame with flat shoe - 172.8 inch max spread IncludedAuxillary Outrigger A-Frame with Flat-shoe - provides 149 inch (3785 mm) maximum spread outside to outside of shoe.

Included

Platform Cover - soft vinyl, 24 x 48 inches IncludedPlatform Liner, 24 x 48 x 42 inches , 50 kV Rating IncludedTool Circuit At Boom Tip, Dual Hydraulic IncludedEngine Start/Stop and secondary stowage IncludedElectric Outrigger Controls, drive hydraulic outrigger control valves. Durable weather proof sealed electronic switches mounted in aluminum boxes located at the rear of the unit unless otherwise specified.

Included

Winch load line swivel hook IncludedAltec Aerial Device Powder Painted White IncludedUnit & Hydraulic Acc.Reservoir, 30 Gallon, Triangular, Mounted in Cargo Area IncludedAN Series Subbase IncludedHVI-22 Hydraulic Oil (Standard) IncludedStandard Pump For PTO IncludedHot shift PTO for automatic transmission IncludedMuncie PTO IncludedStandard PTO/Transmission Functionality for Automatic Transmissions -If chassis is in gear, and PTO switch is activated, PTO will not engage. Chassis will remain in gear. Once the chassis is shifted back into gear the PTO will disengage. For some truck configurations the PTO switch must be turned off to allow the transmission to shift into gear.

Included


Fiberglass body IncludedAltec standard fiberglass body specifications: IncludedMolded fiberglass side compartments IncludedReinforced, double-laminated doors IncludedHeavy duty stainless steel hinges installed on doors IncludedHeavy duty strikers installed on body for door latches IncludedAutomotive-type bulb gasket door seal IncludedCorrosion resistant fasteners and self-locking nuts used throughout IncludedExtruded aluminum drip rail IncludedFiberglass bulkheads installed between compartments IncludedDrains installed in each compartment IncludedBody to be vented IncludedAerial service line with step (ASLS) IncludedGelcoat finish entire body Altec white Included170 inch overall body length Included94 inch overall body width. Included48 inch overall body height. Included18 inch body compartment depth. Included2 x 6 inch drop-in composite retaining board at rear of body. Included2 x 6 inch drop-in composite retaining board at side access step. IncludedGas shock type rigid door holders for vertical doors. IncludedStandard master body locking system. IncludedCable holders on all horizontal doors IncludedOne (1) wheel chock holder installed in fender panel on each side of body. IncludedHotstick shelf extending from rear of first vertical to rear of body on streetside. IncludedTwo (2) hotstick brackets installed on street side. IncludedLarge side hinged hotstick door for multiple shelves on streetside. Included1st vertical street side (LH) - Three (3) adjustable shelves with removable dividers on 4 inch centers.

Included

2nd vertical street side (LH) - Six (6) locking swivel hooks on adjustable rails. 1-4-1 configuration.

Included

3rd vertical street side (LH) - Six (6) locking swivel hooks on adjustable rails. 1-4-1 configuration.

Included

1st horizontal street side (LH) - One (1) fixed shelf extending through rear vertical.

Included

Rear vertical street side (LH) - Outrigger housing. Included1st vertical curb side (RH) - Three (3) adjustable shelves with removable dividers on 4 inch centers.

Included

2nd vertical curb side (RH) - Six (6) locking swivel hooks on adjustable rails. 1-4-1 configuration.

Included

3rd vertical curb side (RH) - Gripstrut access steps with two (2) sloped grab handles.

Included

1st horizontal curb side (RH) - Two (2) adjustable shelves with removable dividers on 8 inch centers.

Included

Rear Vertical curb side (RH) - Five (5) locking swivel hooks on fixed rails. 1-3-1 configuration.

Included

Rear Vertical curb side (RH) - Outrigger housing. IncludedCurbside compartment top access step installed in the cargo area 7 inches behind side access step.

Included

24 inch long x 94 inch wide aluminum tailshelf with 3 inch high retainer rail around sides and rear, installed at rear of body.

Included

Body and Chassis AccessoriesICC Underride Protection IncludedT-125 Style Pintle Hitch (30,000 LB MGTW with 6,000 LB MVL) IncludedSet Of Eye Bolts for Trailer Safety Chain, installed one each side of towing device mount.

Included


Included

Compartment Top Access Step from Body FloorPlatform Access Step From Body Floor Included

Single Platform Access, One Step Mounted to Turntable Platform Rest, Rigid with Rubber Tube IncludedLower boom rest weldment IncludedWood Outrigger Pad, 19'' x 19'' x 2.5'', With Rope Handle IncludedOutrigger Pad Holder, 20" L x 20" W x 5" H, Fits 19.5" x 19.5" x 4" And Smaller Pads, Bolt-On, Bottom Washout Holes, 3/4" Lip Retainer

Included

Pendulum Retainers For Outrigger Pad Holders IncludedMud Flaps (Pair) IncludedWheel Chocks, Rubber with Metal Hairpin Style Handle, (Pair) IncludedSlope Indicator Assembly For Machine Without Outriggers Included5 LB Fire Extinguisher With Light Duty Bracket, Ship loose IncludedTriangular Reflector Kit IncludedFall Protection kit IncludedVinyl manual pouch for storage of all operator and parts manuals IncludedElectrical AccessoriesLights and reflectors in accordance with FMVSS #108 lighting package. (Complete LED, including LED reverse lights)

Included


Included


Included

Finishing DetailsPowder Coat Unit Altec White IncludedFinish Paint Body Accessories Above Body Floor Altec White IncludedStandard; Components mounted below frame rail shall be coated black by Altec. Included

Apply Non-Skid Coating to all walking surfaces IncludedEnglish Safety And Instructional Decals IncludedVehicle Height Placard - Installed In Cab IncludedPlacard, HVI-22 Hydraulic Oil IncludedDielectric test unit according to ANSI requirements. IncludedStability test unit according to ANSI requirements. IncludedInstall on customer supplied chassis Included

9.0 Aerial Units









OptionsUse this section to offer options. Add lines as needed

9.1 CVI Inspection NO CHARGE9.2 AM50E (1,073.00)$ 9.3 Change to AM60E Includes 218 inch Tandemaxle Body 9,307.00$ 9.4 Change to steel body (2,500.00)$ 9.5 Body Compartment re-configure 925.00$





9.0

Altec Model AM55E Articulating Overcenter Aerial Device with a fiberglass upper boom and fiberglass insulator in the lower boom and a proportional joystick upper control and toggle switches. Built in accordance to ALTEC's standard specifications and to include the following features:

$142,671.00

UnitGround to bottom of platform height: 56 feet IncludedWorking height: 61 feet IncludedMaximum reach to edge of platform. 43.4 feet IncludedContinuous Rotation IncludedOutrigger/boom interlock system prevents boom from being unstowed until outriggers have been at least partially deployed

Included


Included

AM55E

8/21/2020 MN-AM55E

St. Joseph, MO




Included


Included

Unit meets or exceeds ANSI 92.2 standards. IncludedAutomatic upper boom stow system IncludedPedestal IncludedTwo-Man Platform (24"x48"x42") Platform is rated at 700 pounds (317.5 kg) and rotates 90 degrees to end of boom. Includes two sets of quick disconnect couplings and controls for hydraulic tools. Includes hydraulically articulating and extending material handling jib with winch and rope mounted on opposite side of upper boom.--Material handling jib capacity is in addition to platform capacity. Jib and winch system includes hydraulic tool lines in boom to furnish 8.0 gpm at 2,000 psi (30.3 lpm/13 800 kPa) and includes:Material handling, hydraulically articulated jib, -30 degree to +90 degree tilt angle (relative to the upper boom). Jib also extends from 43 to 67 inches ( 1092 x 1702 mm) in five pinning positions.One (1) piece 4.0 inch (101.6 mm) square jibHydraulically powered winch rated to 2,000 pounds (907.2 kg) full drum, mounted on the side of the upper boom80 feet of 7/16 inch (24.4 m of 11.1 mm) double-braided synthetic ropeControl valves at platform for hydraulic tools, platform rotation, jib tilt, jib extend and winch controlAuxiliary winch line control valve and platform rotation valve at the turntable to allow rescueValve at boom tip relieves pressure from quick disconnect couplings in Off position. Open-center or closed-center tools may be operated from tool circuitFiberglass covers

Included

Primary Outrigger X-Frame with flat shoe - 172.8 inch max spread IncludedAuxillary Outrigger A-Frame with Flat-shoe - provides 149 inch (3785 mm) maximum spread outside to outside of shoe.

Included

Platform Cover - soft vinyl, 24 x 48 inches IncludedPlatform Liner, 24 x 48 x 42 inches , 50 kV Rating IncludedTool Circuit At Boom Tip, Dual Hydraulic IncludedEngine Start/Stop and secondary stowage IncludedElectric Outrigger Controls, drive hydraulic outrigger control valves. Durable weather proof sealed electronic switches mounted in aluminum boxes located at the rear of the unit unless otherwise specified.

Included

Winch load line swivel hook IncludedAltec Aerial Device Powder Painted White IncludedUnit & Hydraulic Acc.Reservoir, 30 Gallon, Triangular, Mounted in Cargo Area IncludedAN Series Subbase IncludedHVI-22 Hydraulic Oil (Standard) IncludedStandard Pump For PTO IncludedHot shift PTO for automatic transmission IncludedMuncie PTO IncludedStandard PTO/Transmission Functionality for Automatic Transmissions -If chassis is in gear, and PTO switch is activated, PTO will not engage. Chassis will remain in gear. Once the chassis is shifted back into gear the PTO will disengage. For some truck configurations the PTO switch must be turned off to allow the transmission to shift into gear.

Included


Fiberglass body IncludedAltec standard fiberglass body specifications: IncludedMolded fiberglass side compartments IncludedReinforced, double-laminated doors IncludedHeavy duty stainless steel hinges installed on doors IncludedHeavy duty strikers installed on body for door latches IncludedAutomotive-type bulb gasket door seal IncludedCorrosion resistant fasteners and self-locking nuts used throughout IncludedExtruded aluminum drip rail IncludedFiberglass bulkheads installed between compartments IncludedDrains installed in each compartment IncludedBody to be vented IncludedAerial service line with step (ASLS) IncludedGelcoat finish entire body Altec white Included170 inch overall body length Included94 inch overall body width. Included48 inch overall body height. Included18 inch body compartment depth. Included2 x 6 inch drop-in composite retaining board at rear of body. Included2 x 6 inch drop-in composite retaining board at side access step. IncludedGas shock type rigid door holders for vertical doors. IncludedStandard master body locking system. IncludedCable holders on all horizontal doors IncludedOne (1) wheel chock holder installed in fender panel on each side of body. IncludedHotstick shelf extending from rear of first vertical to rear of body on streetside. IncludedTwo (2) hotstick brackets installed on street side. IncludedLarge side hinged hotstick door for multiple shelves on streetside. Included1st vertical street side (LH) - Three (3) adjustable shelves with removable dividers on 4 inch centers.

Included

2nd vertical street side (LH) - Six (6) locking swivel hooks on adjustable rails. 1-4-1 configuration.

Included

3rd vertical street side (LH) - Six (6) locking swivel hooks on adjustable rails. 1-4-1 configuration.

Included

1st horizontal street side (LH) - One (1) fixed shelf extending through rear vertical. Included

Rear vertical street side (LH) - Outrigger housing. Included1st vertical curb side (RH) - Three (3) adjustable shelves with removable dividers on 4 inch centers.

Included

2nd vertical curb side (RH) - Six (6) locking swivel hooks on adjustable rails. 1-4-1 configuration.

Included

3rd vertical curb side (RH) - Gripstrut access steps with two (2) sloped grab handles. Included

1st horizontal curb side (RH) - Two (2) adjustable shelves with removable dividers on 8 inch centers.

Included

Rear Vertical curb side (RH) - Five (5) locking swivel hooks on fixed rails. 1-3-1 configuration.

Included

Rear Vertical curb side (RH) - Outrigger housing. IncludedCurbside compartment top access step installed in the cargo area 7 inches behind side access step.

Included

24 inch long x 94 inch wide aluminum tailshelf with 3 inch high retainer rail around sides and rear, installed at rear of body.

Included

Body and Chassis AccessoriesICC Underride Protection IncludedT-125 Style Pintle Hitch (30,000 LB MGTW with 6,000 LB MVL) IncludedSet Of Eye Bolts for Trailer Safety Chain, installed one each side of towing device mount.

Included


Included

Compartment Top Access Step from Body FloorPlatform Access Step From Body Floor Included

Single Platform Access, One Step Mounted to Turntable Platform Rest, Rigid with Rubber Tube IncludedLower boom rest weldment IncludedWood Outrigger Pad, 19'' x 19'' x 2.5'', With Rope Handle IncludedOutrigger Pad Holder, 20" L x 20" W x 5" H, Fits 19.5" x 19.5" x 4" And Smaller Pads, Bolt-On, Bottom Washout Holes, 3/4" Lip Retainer

Included

Pendulum Retainers For Outrigger Pad Holders IncludedMud Flaps (Pair) IncludedWheel Chocks, Rubber with Metal Hairpin Style Handle, (Pair) IncludedSlope Indicator Assembly For Machine Without Outriggers Included5 LB Fire Extinguisher With Light Duty Bracket, Ship loose IncludedTriangular Reflector Kit IncludedFall Protection kit IncludedVinyl manual pouch for storage of all operator and parts manuals IncludedElectrical AccessoriesLights and reflectors in accordance with FMVSS #108 lighting package. (Complete LED, including LED reverse lights)

Included


Included


Included

Finishing DetailsPowder Coat Unit Altec White IncludedFinish Paint Body Accessories Above Body Floor Altec White IncludedStandard; Components mounted below frame rail shall be coated black by Altec. IncludedApply Non-Skid Coating to all walking surfaces IncludedEnglish Safety And Instructional Decals IncludedVehicle Height Placard - Installed In Cab IncludedPlacard, HVI-22 Hydraulic Oil IncludedDielectric test unit according to ANSI requirements. IncludedStability test unit according to ANSI requirements. IncludedInstall on customer supplied chassis Included

9.0 Aerial UnitsVendor Name: Altec Industries Inc.

Contact Person: Clint BittingStreet Address: 1255 Port Terminal Drive








Options9.1 CVI Inspection NO CHARGE9.2 LR7-56 (1,315.00)$ 9.3 Toe Space Platform 520.00$ 9.4 Add 10' Elevator to LR7-60E70 18,760.00$ 9.5 AUTO BOOM LATCH 1,900.00$ 9.6 24X30 PLATFORM 860.00$

PLATFORM ROTATOR 9,400.00$





9.0 $89,500.00

IncludedIncludedIncludedIncluded

Included

Included

ALTEC Model LR7-60 Articulating Overcenter Aerial Device with an insulating lower boom, insulating upper boom and the Altec ISO-Grip insulating system at the boom tip installed behind

08/21/2020 MN-LR760RM

Creedmoor, NC

UnitGround to bottom of platform height: 60 feetWorking height: 65 feetMaximum reach to edge of platform. Side Mounted Platform: 48.4 feetContinuous RotationOutrigger/boom interlock system prevents boom from being unstowed until outriggers have been at least partially deployedOutrigger/unit selector control is located near the outrigger controls, allows operator to divert hydraulic oil from machine circuit for outrigger operation. This reduces the potential for inadvertent outrigger movement during machine operation if outrigger controls are bumped



Included

IncludedIncluded

Manual Upper Boom stow system IncludedIncludedIncluded

IncludedIncludedIncludedIncludedIncludedIncludedIncludedIncluded

Reservoir, 30 Gallon, Sloped, Mounted in Cargo Area , with sight gauge IncludedIncludedIncludedIncludedIncluded

Included

IncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncluded

Included

IncludedIncludedIncludedIncludedIncluded

Included

LED lighting package, security-mounted, with wiring harness in automotive type loom.Two(2) LED strobes mounted in the upper rear corners of the dump body. Curb side built-in ladder compartment, 12 inches wide x 25 inches high (305 x 635 mm) with wear pad and internal security chain.Pole pruner compartment, 11 inches high (279.4 mm), above ladder compartment with dual shelves and rear locking door. Upper section of rear door opening is open.Interior of chip body finished with scratch and corrosion resistant liner Underside of chip body undercoated.Painted White Altec T-66 Thru Box with curbside and streetside compartments containing the following:Streetside: Single compartment (66 inches long x 50 inches high x 26.5 inches deep) with two (2) barn-style doors and one (1) vertical door. Two (2) full width shelves fixed at 11 inches and 25 inches from top. Rubber matting (0.125 inch thick) in bottom on left side for chainsaw storage. Right side has access to horizontal thru compartment extending to curbside..

Class ''C'' Hydraulic hoist, installed, with 45 degree dump angle and body prop.

Muncie PTOStandard PTO/Transmission Functionality for Automatic Transmissions -If chassis is in gear, and PTO switch is activated, PTO will not engage. Chassis will remain in gear. Once the chassis is shifted back into gear the PTO will disengage. For some truck configurations the PTO switch must be turned off to allow the transmission to shift into gear.

BodyAltec Chip Dump Body 14.5 cubic yard capacity, 96 inches wide x 60 inches high x 132 inches long (2438 x 1524 x 3353 mm) with ladder box on curb side of body and single piece tailgate

Structural Channel stringers and floor channel. 12 gauge minimum floor plate. 14 gauge minimum sides and front with full length die-formed reinforcing ribs. 14 gauge roof. Rear top and sides of body reinforced for lower boom support. 26-1/2 inches (673 mm) high tailgate, hinged curb side with provision to hold open for dumping.12 gauge minimum rear under body skirt panel.

Hot shift PTO for automatic transmission


Platform Cover - soft vinyl, 24 x 24 inchesPlatform Liner, 24 x 24 x 39 inches , 50 kV Rating Tool Circuit At Boom Tip, Dual HydraulicEngine Start/Stop and secondary stowagePrimary Outrigger A-Frame with swivel-shoesHydraulic Outrigger Control ValvesAltec Aerial Device Powder Painted White

Unit & Hydraulic Acc.

HVI-22 Hydraulic Oil (Standard)Standard Pump For PTO

Single, One (1) Man, Fiberglass Platform; fixed side mounted. 24 x 24 x 39 inches.

Unit is painted with a powder coat paint process which provides a finish-painted surface that is highly resistant to chipping, scratching, abrasion and corrosion. Paint is electrostatically applied to the inside as well as outside of fabricated parts then high temperature cured prior to assembly ensuring maximum coverage and protection.

Manuals: Two (2) Operator’s and two (2) Maintenance/ Parts manuals containing instructional markings indicating hazards inherent in the operation of an aerial device.Unit meets or exceeds ANSI 92.2 standards.

Pedestal

Included

IncludedProvide flat plate across top of transverse for walking surface. IncludedPainted White Included

IncludedIncludedIncludedIncludedIncludedIncludedIncluded

IncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncluded

IncludedIncludedIncludedIncludedIncludedIncludedIncluded

IncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedInstall on customer supplied chassis

Altec Modular Panel System (AMPS) - Includes Mounting Panel and Accessory Switches Finishing Details

Powder Coat Unit Altec White Finish Paint Body Accessories Above Body Floor Altec White Standard; Components mounted below frame rail shall be coated black by Altec. Apply Non-Skid Coating to all walking surfaces English Safety And Instructional Decals Vehicle Height Placard - Installed In Cab Placard, HVI-22 Hydraulic Oil Dielectric test unit according to ANSI requirements. Stability test unit according to ANSI requirements.

Install Outrigger Interlock System

Slope Indicator Assembly For Machine Without Outriggers 5 LB Fire Extinguisher With Light Duty Bracket, Ship loose Triangular Reflector Kit Fall Protection kitVinyl manual pouch for storage of all operator and parts manuals

Electrical AccessoriesLights and reflectors in accordance with FMVSS #108 lighting package. (Complete LED, including LED reverse lights) Standard Amber LED Strobe Light With Brush Guard Post Mounted On Streetside Front Dual Tone Back-Up With Outrigger Motion Alarm 6-Way Trailer Receptacle (Pin Type) Installed At Rear Electric Trailer Brake Controller (Tekonsha Voyager #9030)

Wheel Chocks, Rubber with Metal Hairpin Style Handle, (Pair)

Cab Guard, 140'' L, 12 GA Sheet Metal With Non-Skid Surface And Expanded Metal Section At ICC Underride Protection T-100 Style Pintle Hitch (30,000 LB)Set Of Loops for Trailer Safety Chain, installed one each side of towing device mount. Cab Guard Access Stirrup Step(s) With Grab Handle(s) At Curbside Rear Of Cab GuardRigid Access Step Under Through Box Side Access Platform Platform Rest, Rigid with Rubber Tube Wood Outrigger Pad, 19'' x 19'' x 2.5'', With Rope Handle Outrigger Pad Holder, 20" L x 20" W x 5" H, Fits 19.5" x 19.5" x 4" And Smaller Pads, Bolt-On, Bottom Washout Holes, 3/4" Lip Retainer Pendulum Retainers For Outrigger Pad Holders Mud Flaps (Pair)

Body and Chassis Accessories

Curbside: Single compartment (41 inches long x 50 inches high x 26.5 inches deep) with two (2) barn-style doors. Left side has two (2) full width shelves fixed at 11 inches and 25 inches from top. Right side has six (6) material hooks (3-0-3). Platform mounted behind compartment 12 inches high x 25 inches wide x 26.5 inches deep. Horizontal thru compartment (6 inches high) recessed 12 inches, open to streetside with vertical partitions spaced 10 inches, 6 inches and 9 inches wide with drop-down door. Access step to T-box compartment top.Standard features: Bolt-on rotary slam door locks. Gas shock door holders. Door locks are single point with locking cylinders. Finish paint interior compartments the same as exterior. Integrated locking system installed.

9.0 Aerial Units







WarrantyDate & I.D. of Price List

Discount to be applied to Price List (see note below) 0.00%

OptionsUse this section to offer options. Add lines as needed

CVI Inspection -$ FRAME MOUNTED HYDRAULIC TANK 780.00$

OUTRIGGER CONTROLS AT REAR 390.00$ DELETE TOOL CIRCUITS (700.00)$

AUTO BOOM LATCH 1,900.00$ 24X30 PLATFORM 860.00$

DELETE PLATFORM ACESS (2,210.00)$ 10' ELEVATOR 18,760.00$

PLATFROM ROTATOR 9,400.00$





9.0 $99,060.00

IncludedIncluded

IncludedIncluded

LR7-60 RMStandard warranty:One (1) year parts warranty, one (1) year labor warranty, ninty (90) days warranty for travel charges, limited lifetime structural warranty08/21/2020 MN-LR760RM

Creedmoor, NC

ALTEC Model LR7-60RM- Articulating Overcenter Aerial Device with an insulating lower boom, insulating upper boom and the Altec ISO-Grip insulating system at the boom tip installed behind the cab

to include the following features:Unit

Ground to bottom of platform height: 60 feetWorking height: 65 feetMaximum reach to edge of platform. Side Mounted Platform: 48.4 feetContinuous Rotation



Included


Manual Upper Boom stow system IncludedIncluded

IncludedIncludedIncludedIncludedIncludedIncluded

Included

IncludedIncluded

Reservoir, 30 Gallon, Sloped, Mounted in Cargo Area , with sight ga IncludedIncludedIncludedIncludedIncluded

Included

Tool Circuit At Boom Tip, Dual Hydraulic

Primary Outrigger and Auxiliary Outirgger A-Frame with swivel-shoes

Hydraulic Outrigger Control ValvesAltec Aerial Device Powder Painted White

Unit & Hydraulic Acc.

HVI-22 Hydraulic Oil (Standard)Standard Pump For PTOHot shift PTO for automatic transmissionMuncie PTOStandard PTO/Transmission Functionality for Automatic Transmissions -If chassis is in gear, and PTO switch is activated, PTO will not engage. Chassis will remain in gear. Once the chassis is shifted back into gear the PTO will disengage. For some truck configurations the PTO switch must be turned off to allow the transmission to shift into gear.

Body

Engine Start/Stop and secondary stowage

Unit is painted with a powder coat paint process which provides a Manuals: Two (2) Operator’s and two (2) Maintenance/ Parts Unit meets or exceeds ANSI 92.2 standards.

Platform Liner, 24 x 24 x 39 inches , 50 kV Rating

Single, One (1) Man, Fiberglass Platform; fixed side mounted. 24 x 24 x 39 inches. One(1) Platform step- located on the side of the platform nearest Platform Cover - soft vinyl, 24 x 24 inches

Pedestal


Outrigger/boom interlock system prevents boom from being unstowed until outriggers have been at least partially deployed

IncludedIncludedIncluded

IncludedIncludedIncluded

Included

IncludedIncluded

Included


IncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedVinyl manual pouch for storage of all operator and parts manuals

Rigid Access Step Under Through Box Side Access Platform Platform Rest, Rigid with Rubber Tube Wood Outrigger Pad, 19'' x 19'' x 2.5'', With Rope Handle Outrigger Pad Holder, 20" L x 20" W x 5" H, Fits 19.5" x 19.5" x 4" And Smaller Pads, Bolt-On, Bottom Washout Holes, 3/4" Lip Retainer Pendulum Retainers For Outrigger Pad Holders Mud Flaps (Pair) Wheel Chocks, Rubber with Metal Hairpin Style Handle, (Pair) Slope Indicator Assembly For Machine Without Outriggers 5 LB Fire Extinguisher With Light Duty Bracket, Ship loose Triangular Reflector Kit Fall Protection kit

Cab Guard Access Stirrup Step(s) With Grab Handle(s) At Curbside Rear Of Cab Guard

Undercoat body

140" estimated length

96" width4" high flatbed

Light Channel installed at rear

Body and Chassis Accessories

Cab Guard, 140'' L, 12 GA Sheet Metal With Non-Skid Surface And Expanded Metal Section At Front, Black Gator Hyde CoatingICC Underride Protection T-100 Style Pintle Hitch (30,000 LB)Set Of Loops for Trailer Safety Chain, installed one each side of towing device mount.

Steel body platfrom/flatbed

Altec T-40 Thru Box tool compartment 40 inches wide x 50 inches high x 96 inches long (1016 x 1270 x 2438 mm) with 26.5 inch (673

mm) deep curb- and streetside25.Altec T-40 Thru Box tool compartment 40 inches wide x 50 inches high x 96 inches long

(1016 x 1270 x 2438 mm) with 26.5 inch (673 mm) deep curb- and streetside compartments with the following compartmentation:

A.Curbside: Single, vented compartment with two (2) vertical barn-style doors. Left side has two (2) fixed shelves. Right side has three (3) unequal transverse compartments open to streetside.

Compartment bottom has 0.125 inch (3.175mm)rubber liner partitioned for chainsaw gas can and wedge

storage. Security chain for chainsaw provided in bottom.B.Streetside: Single compartment with two (2) vertical barn-style

doors. Left side has three(3) unequal transverse compartments open to curbside. Top center has two (2) fixed shelves. Single drawer kit mounted under fixed shelves. Top right has three (3) swivel rope hooks (0-0-3). Compartment bottom has .125 inch

(3.175 mm) rubber liner partioned for chainsaw gas can and wedge storage. Security chain for chainsaw provided in bottom.

C.Center compartment: Top-opening compartment with Flat Plate-lined lid. Punched-metal face. Interior of compartment total volume

of up to 40''W x 30''D x 29''H W/O floor.D.Standard features: Bolt-on rotary slam door locks. Gas shock door holders. Door locks are single point with locking cylinders.

Finish paint interior compartments the same as exterior. Integrated locking system installed.

E.Painted White

IncludedIncludedIncludedIncludedIncludedIncluded

Included

IncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedInstall on customer supplied chassis

Apply Non-Skid Coating to all walking surfaces English Safety And Instructional Decals Vehicle Height Placard - Installed In Cab Placard, HVI-22 Hydraulic Oil Dielectric test unit according to ANSI requirements. Stability test unit according to ANSI requirements.

Standard; Components mounted below frame rail shall be coated

Electrical AccessoriesLights and reflectors in accordance with FMVSS #108 lighting Standard Amber LED Strobe Light With Brush Guard Post Dual Tone Back-Up With Outrigger Motion Alarm 6-Way Trailer Receptacle (Pin Type) Installed At Rear Electric Trailer Brake Controller (Tekonsha Voyager #9030) Install Outrigger Interlock System

Altec Modular Panel System (AMPS) - Includes Mounting Panel and Accessory Switches

Finishing DetailsPowder Coat Unit Altec White Finish Paint Body Accessories Above Body Floor Altec White

8.0 options

Documents